/* ---------------------------------------------------------------------------- */ | |
/* Atmel Microcontroller Software Support */ | |
/* SAM Software Package License */ | |
/* ---------------------------------------------------------------------------- */ | |
/* Copyright (c) 2014, Atmel Corporation */ | |
/* */ | |
/* All rights reserved. */ | |
/* */ | |
/* Redistribution and use in source and binary forms, with or without */ | |
/* modification, are permitted provided that the following condition is met: */ | |
/* */ | |
/* - Redistributions of source code must retain the above copyright notice, */ | |
/* this list of conditions and the disclaimer below. */ | |
/* */ | |
/* Atmel's name may not be used to endorse or promote products derived from */ | |
/* this software without specific prior written permission. */ | |
/* */ | |
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */ | |
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */ | |
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */ | |
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */ | |
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */ | |
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */ | |
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */ | |
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */ | |
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ | |
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ | |
/* ---------------------------------------------------------------------------- */ | |
#ifndef _SAMV71_HSMCI_COMPONENT_ | |
#define _SAMV71_HSMCI_COMPONENT_ | |
/* ============================================================================= */ | |
/** SOFTWARE API DEFINITION FOR High Speed MultiMedia Card Interface */ | |
/* ============================================================================= */ | |
/** \addtogroup SAMV71_HSMCI High Speed MultiMedia Card Interface */ | |
/*@{*/ | |
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) | |
/** \brief Hsmci hardware registers */ | |
typedef struct { | |
__O uint32_t HSMCI_CR; /**< \brief (Hsmci Offset: 0x00) Control Register */ | |
__IO uint32_t HSMCI_MR; /**< \brief (Hsmci Offset: 0x04) Mode Register */ | |
__IO uint32_t HSMCI_DTOR; /**< \brief (Hsmci Offset: 0x08) Data Timeout Register */ | |
__IO uint32_t HSMCI_SDCR; /**< \brief (Hsmci Offset: 0x0C) SD/SDIO Card Register */ | |
__IO uint32_t HSMCI_ARGR; /**< \brief (Hsmci Offset: 0x10) Argument Register */ | |
__O uint32_t HSMCI_CMDR; /**< \brief (Hsmci Offset: 0x14) Command Register */ | |
__IO uint32_t HSMCI_BLKR; /**< \brief (Hsmci Offset: 0x18) Block Register */ | |
__IO uint32_t HSMCI_CSTOR; /**< \brief (Hsmci Offset: 0x1C) Completion Signal Timeout Register */ | |
__I uint32_t HSMCI_RSPR[4]; /**< \brief (Hsmci Offset: 0x20) Response Register */ | |
__I uint32_t HSMCI_RDR; /**< \brief (Hsmci Offset: 0x30) Receive Data Register */ | |
__O uint32_t HSMCI_TDR; /**< \brief (Hsmci Offset: 0x34) Transmit Data Register */ | |
__I uint32_t Reserved1[2]; | |
__I uint32_t HSMCI_SR; /**< \brief (Hsmci Offset: 0x40) Status Register */ | |
__O uint32_t HSMCI_IER; /**< \brief (Hsmci Offset: 0x44) Interrupt Enable Register */ | |
__O uint32_t HSMCI_IDR; /**< \brief (Hsmci Offset: 0x48) Interrupt Disable Register */ | |
__I uint32_t HSMCI_IMR; /**< \brief (Hsmci Offset: 0x4C) Interrupt Mask Register */ | |
__IO uint32_t HSMCI_DMA; /**< \brief (Hsmci Offset: 0x50) DMA Configuration Register */ | |
__IO uint32_t HSMCI_CFG; /**< \brief (Hsmci Offset: 0x54) Configuration Register */ | |
__I uint32_t Reserved2[35]; | |
__IO uint32_t HSMCI_WPMR; /**< \brief (Hsmci Offset: 0xE4) Write Protection Mode Register */ | |
__I uint32_t HSMCI_WPSR; /**< \brief (Hsmci Offset: 0xE8) Write Protection Status Register */ | |
__I uint32_t Reserved3[69]; | |
__IO uint32_t HSMCI_FIFO[256]; /**< \brief (Hsmci Offset: 0x200) FIFO Memory Aperture0 */ | |
} Hsmci; | |
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ | |
/* -------- HSMCI_CR : (HSMCI Offset: 0x00) Control Register -------- */ | |
#define HSMCI_CR_MCIEN (0x1u << 0) /**< \brief (HSMCI_CR) Multi-Media Interface Enable */ | |
#define HSMCI_CR_MCIDIS (0x1u << 1) /**< \brief (HSMCI_CR) Multi-Media Interface Disable */ | |
#define HSMCI_CR_PWSEN (0x1u << 2) /**< \brief (HSMCI_CR) Power Save Mode Enable */ | |
#define HSMCI_CR_PWSDIS (0x1u << 3) /**< \brief (HSMCI_CR) Power Save Mode Disable */ | |
#define HSMCI_CR_SWRST (0x1u << 7) /**< \brief (HSMCI_CR) Software Reset */ | |
/* -------- HSMCI_MR : (HSMCI Offset: 0x04) Mode Register -------- */ | |
#define HSMCI_MR_CLKDIV_Pos 0 | |
#define HSMCI_MR_CLKDIV_Msk (0xffu << HSMCI_MR_CLKDIV_Pos) /**< \brief (HSMCI_MR) Clock Divider */ | |
#define HSMCI_MR_CLKDIV(value) ((HSMCI_MR_CLKDIV_Msk & ((value) << HSMCI_MR_CLKDIV_Pos))) | |
#define HSMCI_MR_PWSDIV_Pos 8 | |
#define HSMCI_MR_PWSDIV_Msk (0x7u << HSMCI_MR_PWSDIV_Pos) /**< \brief (HSMCI_MR) Power Saving Divider */ | |
#define HSMCI_MR_PWSDIV(value) ((HSMCI_MR_PWSDIV_Msk & ((value) << HSMCI_MR_PWSDIV_Pos))) | |
#define HSMCI_MR_RDPROOF (0x1u << 11) /**< \brief (HSMCI_MR) Read Proof Enable */ | |
#define HSMCI_MR_WRPROOF (0x1u << 12) /**< \brief (HSMCI_MR) Write Proof Enable */ | |
#define HSMCI_MR_FBYTE (0x1u << 13) /**< \brief (HSMCI_MR) Force Byte Transfer */ | |
#define HSMCI_MR_PADV (0x1u << 14) /**< \brief (HSMCI_MR) Padding Value */ | |
#define HSMCI_MR_CLKODD (0x1u << 16) /**< \brief (HSMCI_MR) Clock divider is odd */ | |
/* -------- HSMCI_DTOR : (HSMCI Offset: 0x08) Data Timeout Register -------- */ | |
#define HSMCI_DTOR_DTOCYC_Pos 0 | |
#define HSMCI_DTOR_DTOCYC_Msk (0xfu << HSMCI_DTOR_DTOCYC_Pos) /**< \brief (HSMCI_DTOR) Data Timeout Cycle Number */ | |
#define HSMCI_DTOR_DTOCYC(value) ((HSMCI_DTOR_DTOCYC_Msk & ((value) << HSMCI_DTOR_DTOCYC_Pos))) | |
#define HSMCI_DTOR_DTOMUL_Pos 4 | |
#define HSMCI_DTOR_DTOMUL_Msk (0x7u << HSMCI_DTOR_DTOMUL_Pos) /**< \brief (HSMCI_DTOR) Data Timeout Multiplier */ | |
#define HSMCI_DTOR_DTOMUL(value) ((HSMCI_DTOR_DTOMUL_Msk & ((value) << HSMCI_DTOR_DTOMUL_Pos))) | |
#define HSMCI_DTOR_DTOMUL_1 (0x0u << 4) /**< \brief (HSMCI_DTOR) DTOCYC */ | |
#define HSMCI_DTOR_DTOMUL_16 (0x1u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 16 */ | |
#define HSMCI_DTOR_DTOMUL_128 (0x2u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 128 */ | |
#define HSMCI_DTOR_DTOMUL_256 (0x3u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 256 */ | |
#define HSMCI_DTOR_DTOMUL_1024 (0x4u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 1024 */ | |
#define HSMCI_DTOR_DTOMUL_4096 (0x5u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 4096 */ | |
#define HSMCI_DTOR_DTOMUL_65536 (0x6u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 65536 */ | |
#define HSMCI_DTOR_DTOMUL_1048576 (0x7u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 1048576 */ | |
/* -------- HSMCI_SDCR : (HSMCI Offset: 0x0C) SD/SDIO Card Register -------- */ | |
#define HSMCI_SDCR_SDCSEL_Pos 0 | |
#define HSMCI_SDCR_SDCSEL_Msk (0x3u << HSMCI_SDCR_SDCSEL_Pos) /**< \brief (HSMCI_SDCR) SDCard/SDIO Slot */ | |
#define HSMCI_SDCR_SDCSEL(value) ((HSMCI_SDCR_SDCSEL_Msk & ((value) << HSMCI_SDCR_SDCSEL_Pos))) | |
#define HSMCI_SDCR_SDCSEL_SLOTA (0x0u << 0) /**< \brief (HSMCI_SDCR) Slot A is selected. */ | |
#define HSMCI_SDCR_SDCBUS_Pos 6 | |
#define HSMCI_SDCR_SDCBUS_Msk (0x3u << HSMCI_SDCR_SDCBUS_Pos) /**< \brief (HSMCI_SDCR) SDCard/SDIO Bus Width */ | |
#define HSMCI_SDCR_SDCBUS(value) ((HSMCI_SDCR_SDCBUS_Msk & ((value) << HSMCI_SDCR_SDCBUS_Pos))) | |
#define HSMCI_SDCR_SDCBUS_1 (0x0u << 6) /**< \brief (HSMCI_SDCR) 1 bit */ | |
#define HSMCI_SDCR_SDCBUS_4 (0x2u << 6) /**< \brief (HSMCI_SDCR) 4 bits */ | |
#define HSMCI_SDCR_SDCBUS_8 (0x3u << 6) /**< \brief (HSMCI_SDCR) 8 bits */ | |
/* -------- HSMCI_ARGR : (HSMCI Offset: 0x10) Argument Register -------- */ | |
#define HSMCI_ARGR_ARG_Pos 0 | |
#define HSMCI_ARGR_ARG_Msk (0xffffffffu << HSMCI_ARGR_ARG_Pos) /**< \brief (HSMCI_ARGR) Command Argument */ | |
#define HSMCI_ARGR_ARG(value) ((HSMCI_ARGR_ARG_Msk & ((value) << HSMCI_ARGR_ARG_Pos))) | |
/* -------- HSMCI_CMDR : (HSMCI Offset: 0x14) Command Register -------- */ | |
#define HSMCI_CMDR_CMDNB_Pos 0 | |
#define HSMCI_CMDR_CMDNB_Msk (0x3fu << HSMCI_CMDR_CMDNB_Pos) /**< \brief (HSMCI_CMDR) Command Number */ | |
#define HSMCI_CMDR_CMDNB(value) ((HSMCI_CMDR_CMDNB_Msk & ((value) << HSMCI_CMDR_CMDNB_Pos))) | |
#define HSMCI_CMDR_RSPTYP_Pos 6 | |
#define HSMCI_CMDR_RSPTYP_Msk (0x3u << HSMCI_CMDR_RSPTYP_Pos) /**< \brief (HSMCI_CMDR) Response Type */ | |
#define HSMCI_CMDR_RSPTYP(value) ((HSMCI_CMDR_RSPTYP_Msk & ((value) << HSMCI_CMDR_RSPTYP_Pos))) | |
#define HSMCI_CMDR_RSPTYP_NORESP (0x0u << 6) /**< \brief (HSMCI_CMDR) No response */ | |
#define HSMCI_CMDR_RSPTYP_48_BIT (0x1u << 6) /**< \brief (HSMCI_CMDR) 48-bit response */ | |
#define HSMCI_CMDR_RSPTYP_136_BIT (0x2u << 6) /**< \brief (HSMCI_CMDR) 136-bit response */ | |
#define HSMCI_CMDR_RSPTYP_R1B (0x3u << 6) /**< \brief (HSMCI_CMDR) R1b response type */ | |
#define HSMCI_CMDR_SPCMD_Pos 8 | |
#define HSMCI_CMDR_SPCMD_Msk (0x7u << HSMCI_CMDR_SPCMD_Pos) /**< \brief (HSMCI_CMDR) Special Command */ | |
#define HSMCI_CMDR_SPCMD(value) ((HSMCI_CMDR_SPCMD_Msk & ((value) << HSMCI_CMDR_SPCMD_Pos))) | |
#define HSMCI_CMDR_SPCMD_STD (0x0u << 8) /**< \brief (HSMCI_CMDR) Not a special CMD. */ | |
#define HSMCI_CMDR_SPCMD_INIT (0x1u << 8) /**< \brief (HSMCI_CMDR) Initialization CMD: 74 clock cycles for initialization sequence. */ | |
#define HSMCI_CMDR_SPCMD_SYNC (0x2u << 8) /**< \brief (HSMCI_CMDR) Synchronized CMD: Wait for the end of the current data block transfer before sending the pending command. */ | |
#define HSMCI_CMDR_SPCMD_CE_ATA (0x3u << 8) /**< \brief (HSMCI_CMDR) CE-ATA Completion Signal disable Command. The host cancels the ability for the device to return a command completion signal on the command line. */ | |
#define HSMCI_CMDR_SPCMD_IT_CMD (0x4u << 8) /**< \brief (HSMCI_CMDR) Interrupt command: Corresponds to the Interrupt Mode (CMD40). */ | |
#define HSMCI_CMDR_SPCMD_IT_RESP (0x5u << 8) /**< \brief (HSMCI_CMDR) Interrupt response: Corresponds to the Interrupt Mode (CMD40). */ | |
#define HSMCI_CMDR_SPCMD_BOR (0x6u << 8) /**< \brief (HSMCI_CMDR) Boot Operation Request. Start a boot operation mode, the host processor can read boot data from the MMC device directly. */ | |
#define HSMCI_CMDR_SPCMD_EBO (0x7u << 8) /**< \brief (HSMCI_CMDR) End Boot Operation. This command allows the host processor to terminate the boot operation mode. */ | |
#define HSMCI_CMDR_OPDCMD (0x1u << 11) /**< \brief (HSMCI_CMDR) Open Drain Command */ | |
#define HSMCI_CMDR_OPDCMD_PUSHPULL (0x0u << 11) /**< \brief (HSMCI_CMDR) Push pull command. */ | |
#define HSMCI_CMDR_OPDCMD_OPENDRAIN (0x1u << 11) /**< \brief (HSMCI_CMDR) Open drain command. */ | |
#define HSMCI_CMDR_MAXLAT (0x1u << 12) /**< \brief (HSMCI_CMDR) Max Latency for Command to Response */ | |
#define HSMCI_CMDR_MAXLAT_5 (0x0u << 12) /**< \brief (HSMCI_CMDR) 5-cycle max latency. */ | |
#define HSMCI_CMDR_MAXLAT_64 (0x1u << 12) /**< \brief (HSMCI_CMDR) 64-cycle max latency. */ | |
#define HSMCI_CMDR_TRCMD_Pos 16 | |
#define HSMCI_CMDR_TRCMD_Msk (0x3u << HSMCI_CMDR_TRCMD_Pos) /**< \brief (HSMCI_CMDR) Transfer Command */ | |
#define HSMCI_CMDR_TRCMD(value) ((HSMCI_CMDR_TRCMD_Msk & ((value) << HSMCI_CMDR_TRCMD_Pos))) | |
#define HSMCI_CMDR_TRCMD_NO_DATA (0x0u << 16) /**< \brief (HSMCI_CMDR) No data transfer */ | |
#define HSMCI_CMDR_TRCMD_START_DATA (0x1u << 16) /**< \brief (HSMCI_CMDR) Start data transfer */ | |
#define HSMCI_CMDR_TRCMD_STOP_DATA (0x2u << 16) /**< \brief (HSMCI_CMDR) Stop data transfer */ | |
#define HSMCI_CMDR_TRDIR (0x1u << 18) /**< \brief (HSMCI_CMDR) Transfer Direction */ | |
#define HSMCI_CMDR_TRDIR_WRITE (0x0u << 18) /**< \brief (HSMCI_CMDR) Write. */ | |
#define HSMCI_CMDR_TRDIR_READ (0x1u << 18) /**< \brief (HSMCI_CMDR) Read. */ | |
#define HSMCI_CMDR_TRTYP_Pos 19 | |
#define HSMCI_CMDR_TRTYP_Msk (0x7u << HSMCI_CMDR_TRTYP_Pos) /**< \brief (HSMCI_CMDR) Transfer Type */ | |
#define HSMCI_CMDR_TRTYP(value) ((HSMCI_CMDR_TRTYP_Msk & ((value) << HSMCI_CMDR_TRTYP_Pos))) | |
#define HSMCI_CMDR_TRTYP_SINGLE (0x0u << 19) /**< \brief (HSMCI_CMDR) MMC/SD Card Single Block */ | |
#define HSMCI_CMDR_TRTYP_MULTIPLE (0x1u << 19) /**< \brief (HSMCI_CMDR) MMC/SD Card Multiple Block */ | |
#define HSMCI_CMDR_TRTYP_STREAM (0x2u << 19) /**< \brief (HSMCI_CMDR) MMC Stream */ | |
#define HSMCI_CMDR_TRTYP_BYTE (0x4u << 19) /**< \brief (HSMCI_CMDR) SDIO Byte */ | |
#define HSMCI_CMDR_TRTYP_BLOCK (0x5u << 19) /**< \brief (HSMCI_CMDR) SDIO Block */ | |
#define HSMCI_CMDR_IOSPCMD_Pos 24 | |
#define HSMCI_CMDR_IOSPCMD_Msk (0x3u << HSMCI_CMDR_IOSPCMD_Pos) /**< \brief (HSMCI_CMDR) SDIO Special Command */ | |
#define HSMCI_CMDR_IOSPCMD(value) ((HSMCI_CMDR_IOSPCMD_Msk & ((value) << HSMCI_CMDR_IOSPCMD_Pos))) | |
#define HSMCI_CMDR_IOSPCMD_STD (0x0u << 24) /**< \brief (HSMCI_CMDR) Not an SDIO Special Command */ | |
#define HSMCI_CMDR_IOSPCMD_SUSPEND (0x1u << 24) /**< \brief (HSMCI_CMDR) SDIO Suspend Command */ | |
#define HSMCI_CMDR_IOSPCMD_RESUME (0x2u << 24) /**< \brief (HSMCI_CMDR) SDIO Resume Command */ | |
#define HSMCI_CMDR_ATACS (0x1u << 26) /**< \brief (HSMCI_CMDR) ATA with Command Completion Signal */ | |
#define HSMCI_CMDR_ATACS_NORMAL (0x0u << 26) /**< \brief (HSMCI_CMDR) Normal operation mode. */ | |
#define HSMCI_CMDR_ATACS_COMPLETION (0x1u << 26) /**< \brief (HSMCI_CMDR) This bit indicates that a completion signal is expected within a programmed amount of time (HSMCI_CSTOR). */ | |
#define HSMCI_CMDR_BOOT_ACK (0x1u << 27) /**< \brief (HSMCI_CMDR) Boot Operation Acknowledge */ | |
/* -------- HSMCI_BLKR : (HSMCI Offset: 0x18) Block Register -------- */ | |
#define HSMCI_BLKR_BCNT_Pos 0 | |
#define HSMCI_BLKR_BCNT_Msk (0xffffu << HSMCI_BLKR_BCNT_Pos) /**< \brief (HSMCI_BLKR) MMC/SDIO Block Count - SDIO Byte Count */ | |
#define HSMCI_BLKR_BCNT(value) ((HSMCI_BLKR_BCNT_Msk & ((value) << HSMCI_BLKR_BCNT_Pos))) | |
#define HSMCI_BLKR_BLKLEN_Pos 16 | |
#define HSMCI_BLKR_BLKLEN_Msk (0xffffu << HSMCI_BLKR_BLKLEN_Pos) /**< \brief (HSMCI_BLKR) Data Block Length */ | |
#define HSMCI_BLKR_BLKLEN(value) ((HSMCI_BLKR_BLKLEN_Msk & ((value) << HSMCI_BLKR_BLKLEN_Pos))) | |
/* -------- HSMCI_CSTOR : (HSMCI Offset: 0x1C) Completion Signal Timeout Register -------- */ | |
#define HSMCI_CSTOR_CSTOCYC_Pos 0 | |
#define HSMCI_CSTOR_CSTOCYC_Msk (0xfu << HSMCI_CSTOR_CSTOCYC_Pos) /**< \brief (HSMCI_CSTOR) Completion Signal Timeout Cycle Number */ | |
#define HSMCI_CSTOR_CSTOCYC(value) ((HSMCI_CSTOR_CSTOCYC_Msk & ((value) << HSMCI_CSTOR_CSTOCYC_Pos))) | |
#define HSMCI_CSTOR_CSTOMUL_Pos 4 | |
#define HSMCI_CSTOR_CSTOMUL_Msk (0x7u << HSMCI_CSTOR_CSTOMUL_Pos) /**< \brief (HSMCI_CSTOR) Completion Signal Timeout Multiplier */ | |
#define HSMCI_CSTOR_CSTOMUL(value) ((HSMCI_CSTOR_CSTOMUL_Msk & ((value) << HSMCI_CSTOR_CSTOMUL_Pos))) | |
#define HSMCI_CSTOR_CSTOMUL_1 (0x0u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1 */ | |
#define HSMCI_CSTOR_CSTOMUL_16 (0x1u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 16 */ | |
#define HSMCI_CSTOR_CSTOMUL_128 (0x2u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 128 */ | |
#define HSMCI_CSTOR_CSTOMUL_256 (0x3u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 256 */ | |
#define HSMCI_CSTOR_CSTOMUL_1024 (0x4u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1024 */ | |
#define HSMCI_CSTOR_CSTOMUL_4096 (0x5u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 4096 */ | |
#define HSMCI_CSTOR_CSTOMUL_65536 (0x6u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 65536 */ | |
#define HSMCI_CSTOR_CSTOMUL_1048576 (0x7u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1048576 */ | |
/* -------- HSMCI_RSPR[4] : (HSMCI Offset: 0x20) Response Register -------- */ | |
#define HSMCI_RSPR_RSP_Pos 0 | |
#define HSMCI_RSPR_RSP_Msk (0xffffffffu << HSMCI_RSPR_RSP_Pos) /**< \brief (HSMCI_RSPR[4]) Response */ | |
/* -------- HSMCI_RDR : (HSMCI Offset: 0x30) Receive Data Register -------- */ | |
#define HSMCI_RDR_DATA_Pos 0 | |
#define HSMCI_RDR_DATA_Msk (0xffffffffu << HSMCI_RDR_DATA_Pos) /**< \brief (HSMCI_RDR) Data to Read */ | |
/* -------- HSMCI_TDR : (HSMCI Offset: 0x34) Transmit Data Register -------- */ | |
#define HSMCI_TDR_DATA_Pos 0 | |
#define HSMCI_TDR_DATA_Msk (0xffffffffu << HSMCI_TDR_DATA_Pos) /**< \brief (HSMCI_TDR) Data to Write */ | |
#define HSMCI_TDR_DATA(value) ((HSMCI_TDR_DATA_Msk & ((value) << HSMCI_TDR_DATA_Pos))) | |
/* -------- HSMCI_SR : (HSMCI Offset: 0x40) Status Register -------- */ | |
#define HSMCI_SR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_SR) Command Ready (cleared by writing in HSMCI_CMDR) */ | |
#define HSMCI_SR_RXRDY (0x1u << 1) /**< \brief (HSMCI_SR) Receiver Ready (cleared by reading HSMCI_RDR) */ | |
#define HSMCI_SR_TXRDY (0x1u << 2) /**< \brief (HSMCI_SR) Transmit Ready (cleared by writing in HSMCI_TDR) */ | |
#define HSMCI_SR_BLKE (0x1u << 3) /**< \brief (HSMCI_SR) Data Block Ended (cleared on read) */ | |
#define HSMCI_SR_DTIP (0x1u << 4) /**< \brief (HSMCI_SR) Data Transfer in Progress (cleared at the end of CRC16 calculation) */ | |
#define HSMCI_SR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_SR) HSMCI Not Busy */ | |
#define HSMCI_SR_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_SR) SDIO Interrupt for Slot A (cleared on read) */ | |
#define HSMCI_SR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_SR) SDIO Read Wait Operation Status */ | |
#define HSMCI_SR_CSRCV (0x1u << 13) /**< \brief (HSMCI_SR) CE-ATA Completion Signal Received (cleared on read) */ | |
#define HSMCI_SR_RINDE (0x1u << 16) /**< \brief (HSMCI_SR) Response Index Error (cleared by writing in HSMCI_CMDR) */ | |
#define HSMCI_SR_RDIRE (0x1u << 17) /**< \brief (HSMCI_SR) Response Direction Error (cleared by writing in HSMCI_CMDR) */ | |
#define HSMCI_SR_RCRCE (0x1u << 18) /**< \brief (HSMCI_SR) Response CRC Error (cleared by writing in HSMCI_CMDR) */ | |
#define HSMCI_SR_RENDE (0x1u << 19) /**< \brief (HSMCI_SR) Response End Bit Error (cleared by writing in HSMCI_CMDR) */ | |
#define HSMCI_SR_RTOE (0x1u << 20) /**< \brief (HSMCI_SR) Response Time-out Error (cleared by writing in HSMCI_CMDR) */ | |
#define HSMCI_SR_DCRCE (0x1u << 21) /**< \brief (HSMCI_SR) Data CRC Error (cleared on read) */ | |
#define HSMCI_SR_DTOE (0x1u << 22) /**< \brief (HSMCI_SR) Data Time-out Error (cleared on read) */ | |
#define HSMCI_SR_CSTOE (0x1u << 23) /**< \brief (HSMCI_SR) Completion Signal Time-out Error (cleared on read) */ | |
#define HSMCI_SR_BLKOVRE (0x1u << 24) /**< \brief (HSMCI_SR) DMA Block Overrun Error (cleared on read) */ | |
#define HSMCI_SR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_SR) FIFO empty flag */ | |
#define HSMCI_SR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_SR) Transfer Done flag */ | |
#define HSMCI_SR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_SR) Boot Operation Acknowledge Received (cleared on read) */ | |
#define HSMCI_SR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_SR) Boot Operation Acknowledge Error (cleared on read) */ | |
#define HSMCI_SR_OVRE (0x1u << 30) /**< \brief (HSMCI_SR) Overrun (if FERRCTRL = 1, cleared by writing in HSMCI_CMDR or cleared on read if FERRCTRL = 0) */ | |
#define HSMCI_SR_UNRE (0x1u << 31) /**< \brief (HSMCI_SR) Underrun (if FERRCTRL = 1, cleared by writing in HSMCI_CMDR or cleared on read if FERRCTRL = 0) */ | |
/* -------- HSMCI_IER : (HSMCI Offset: 0x44) Interrupt Enable Register -------- */ | |
#define HSMCI_IER_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IER) Command Ready Interrupt Enable */ | |
#define HSMCI_IER_RXRDY (0x1u << 1) /**< \brief (HSMCI_IER) Receiver Ready Interrupt Enable */ | |
#define HSMCI_IER_TXRDY (0x1u << 2) /**< \brief (HSMCI_IER) Transmit Ready Interrupt Enable */ | |
#define HSMCI_IER_BLKE (0x1u << 3) /**< \brief (HSMCI_IER) Data Block Ended Interrupt Enable */ | |
#define HSMCI_IER_DTIP (0x1u << 4) /**< \brief (HSMCI_IER) Data Transfer in Progress Interrupt Enable */ | |
#define HSMCI_IER_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IER) Data Not Busy Interrupt Enable */ | |
#define HSMCI_IER_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_IER) SDIO Interrupt for Slot A Interrupt Enable */ | |
#define HSMCI_IER_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IER) SDIO Read Wait Operation Status Interrupt Enable */ | |
#define HSMCI_IER_CSRCV (0x1u << 13) /**< \brief (HSMCI_IER) Completion Signal Received Interrupt Enable */ | |
#define HSMCI_IER_RINDE (0x1u << 16) /**< \brief (HSMCI_IER) Response Index Error Interrupt Enable */ | |
#define HSMCI_IER_RDIRE (0x1u << 17) /**< \brief (HSMCI_IER) Response Direction Error Interrupt Enable */ | |
#define HSMCI_IER_RCRCE (0x1u << 18) /**< \brief (HSMCI_IER) Response CRC Error Interrupt Enable */ | |
#define HSMCI_IER_RENDE (0x1u << 19) /**< \brief (HSMCI_IER) Response End Bit Error Interrupt Enable */ | |
#define HSMCI_IER_RTOE (0x1u << 20) /**< \brief (HSMCI_IER) Response Time-out Error Interrupt Enable */ | |
#define HSMCI_IER_DCRCE (0x1u << 21) /**< \brief (HSMCI_IER) Data CRC Error Interrupt Enable */ | |
#define HSMCI_IER_DTOE (0x1u << 22) /**< \brief (HSMCI_IER) Data Time-out Error Interrupt Enable */ | |
#define HSMCI_IER_CSTOE (0x1u << 23) /**< \brief (HSMCI_IER) Completion Signal Timeout Error Interrupt Enable */ | |
#define HSMCI_IER_BLKOVRE (0x1u << 24) /**< \brief (HSMCI_IER) DMA Block Overrun Error Interrupt Enable */ | |
#define HSMCI_IER_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IER) FIFO empty Interrupt enable */ | |
#define HSMCI_IER_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IER) Transfer Done Interrupt enable */ | |
#define HSMCI_IER_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IER) Boot Acknowledge Interrupt Enable */ | |
#define HSMCI_IER_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IER) Boot Acknowledge Error Interrupt Enable */ | |
#define HSMCI_IER_OVRE (0x1u << 30) /**< \brief (HSMCI_IER) Overrun Interrupt Enable */ | |
#define HSMCI_IER_UNRE (0x1u << 31) /**< \brief (HSMCI_IER) Underrun Interrupt Enable */ | |
/* -------- HSMCI_IDR : (HSMCI Offset: 0x48) Interrupt Disable Register -------- */ | |
#define HSMCI_IDR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IDR) Command Ready Interrupt Disable */ | |
#define HSMCI_IDR_RXRDY (0x1u << 1) /**< \brief (HSMCI_IDR) Receiver Ready Interrupt Disable */ | |
#define HSMCI_IDR_TXRDY (0x1u << 2) /**< \brief (HSMCI_IDR) Transmit Ready Interrupt Disable */ | |
#define HSMCI_IDR_BLKE (0x1u << 3) /**< \brief (HSMCI_IDR) Data Block Ended Interrupt Disable */ | |
#define HSMCI_IDR_DTIP (0x1u << 4) /**< \brief (HSMCI_IDR) Data Transfer in Progress Interrupt Disable */ | |
#define HSMCI_IDR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IDR) Data Not Busy Interrupt Disable */ | |
#define HSMCI_IDR_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_IDR) SDIO Interrupt for Slot A Interrupt Disable */ | |
#define HSMCI_IDR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IDR) SDIO Read Wait Operation Status Interrupt Disable */ | |
#define HSMCI_IDR_CSRCV (0x1u << 13) /**< \brief (HSMCI_IDR) Completion Signal received interrupt Disable */ | |
#define HSMCI_IDR_RINDE (0x1u << 16) /**< \brief (HSMCI_IDR) Response Index Error Interrupt Disable */ | |
#define HSMCI_IDR_RDIRE (0x1u << 17) /**< \brief (HSMCI_IDR) Response Direction Error Interrupt Disable */ | |
#define HSMCI_IDR_RCRCE (0x1u << 18) /**< \brief (HSMCI_IDR) Response CRC Error Interrupt Disable */ | |
#define HSMCI_IDR_RENDE (0x1u << 19) /**< \brief (HSMCI_IDR) Response End Bit Error Interrupt Disable */ | |
#define HSMCI_IDR_RTOE (0x1u << 20) /**< \brief (HSMCI_IDR) Response Time-out Error Interrupt Disable */ | |
#define HSMCI_IDR_DCRCE (0x1u << 21) /**< \brief (HSMCI_IDR) Data CRC Error Interrupt Disable */ | |
#define HSMCI_IDR_DTOE (0x1u << 22) /**< \brief (HSMCI_IDR) Data Time-out Error Interrupt Disable */ | |
#define HSMCI_IDR_CSTOE (0x1u << 23) /**< \brief (HSMCI_IDR) Completion Signal Time out Error Interrupt Disable */ | |
#define HSMCI_IDR_BLKOVRE (0x1u << 24) /**< \brief (HSMCI_IDR) DMA Block Overrun Error Interrupt Disable */ | |
#define HSMCI_IDR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IDR) FIFO empty Interrupt Disable */ | |
#define HSMCI_IDR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IDR) Transfer Done Interrupt Disable */ | |
#define HSMCI_IDR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IDR) Boot Acknowledge Interrupt Disable */ | |
#define HSMCI_IDR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IDR) Boot Acknowledge Error Interrupt Disable */ | |
#define HSMCI_IDR_OVRE (0x1u << 30) /**< \brief (HSMCI_IDR) Overrun Interrupt Disable */ | |
#define HSMCI_IDR_UNRE (0x1u << 31) /**< \brief (HSMCI_IDR) Underrun Interrupt Disable */ | |
/* -------- HSMCI_IMR : (HSMCI Offset: 0x4C) Interrupt Mask Register -------- */ | |
#define HSMCI_IMR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IMR) Command Ready Interrupt Mask */ | |
#define HSMCI_IMR_RXRDY (0x1u << 1) /**< \brief (HSMCI_IMR) Receiver Ready Interrupt Mask */ | |
#define HSMCI_IMR_TXRDY (0x1u << 2) /**< \brief (HSMCI_IMR) Transmit Ready Interrupt Mask */ | |
#define HSMCI_IMR_BLKE (0x1u << 3) /**< \brief (HSMCI_IMR) Data Block Ended Interrupt Mask */ | |
#define HSMCI_IMR_DTIP (0x1u << 4) /**< \brief (HSMCI_IMR) Data Transfer in Progress Interrupt Mask */ | |
#define HSMCI_IMR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IMR) Data Not Busy Interrupt Mask */ | |
#define HSMCI_IMR_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_IMR) SDIO Interrupt for Slot A Interrupt Mask */ | |
#define HSMCI_IMR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IMR) SDIO Read Wait Operation Status Interrupt Mask */ | |
#define HSMCI_IMR_CSRCV (0x1u << 13) /**< \brief (HSMCI_IMR) Completion Signal Received Interrupt Mask */ | |
#define HSMCI_IMR_RINDE (0x1u << 16) /**< \brief (HSMCI_IMR) Response Index Error Interrupt Mask */ | |
#define HSMCI_IMR_RDIRE (0x1u << 17) /**< \brief (HSMCI_IMR) Response Direction Error Interrupt Mask */ | |
#define HSMCI_IMR_RCRCE (0x1u << 18) /**< \brief (HSMCI_IMR) Response CRC Error Interrupt Mask */ | |
#define HSMCI_IMR_RENDE (0x1u << 19) /**< \brief (HSMCI_IMR) Response End Bit Error Interrupt Mask */ | |
#define HSMCI_IMR_RTOE (0x1u << 20) /**< \brief (HSMCI_IMR) Response Time-out Error Interrupt Mask */ | |
#define HSMCI_IMR_DCRCE (0x1u << 21) /**< \brief (HSMCI_IMR) Data CRC Error Interrupt Mask */ | |
#define HSMCI_IMR_DTOE (0x1u << 22) /**< \brief (HSMCI_IMR) Data Time-out Error Interrupt Mask */ | |
#define HSMCI_IMR_CSTOE (0x1u << 23) /**< \brief (HSMCI_IMR) Completion Signal Time-out Error Interrupt Mask */ | |
#define HSMCI_IMR_BLKOVRE (0x1u << 24) /**< \brief (HSMCI_IMR) DMA Block Overrun Error Interrupt Mask */ | |
#define HSMCI_IMR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IMR) FIFO Empty Interrupt Mask */ | |
#define HSMCI_IMR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IMR) Transfer Done Interrupt Mask */ | |
#define HSMCI_IMR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IMR) Boot Operation Acknowledge Received Interrupt Mask */ | |
#define HSMCI_IMR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IMR) Boot Operation Acknowledge Error Interrupt Mask */ | |
#define HSMCI_IMR_OVRE (0x1u << 30) /**< \brief (HSMCI_IMR) Overrun Interrupt Mask */ | |
#define HSMCI_IMR_UNRE (0x1u << 31) /**< \brief (HSMCI_IMR) Underrun Interrupt Mask */ | |
/* -------- HSMCI_DMA : (HSMCI Offset: 0x50) DMA Configuration Register -------- */ | |
#define HSMCI_DMA_CHKSIZE_Pos 4 | |
#define HSMCI_DMA_CHKSIZE_Msk (0x7u << HSMCI_DMA_CHKSIZE_Pos) /**< \brief (HSMCI_DMA) DMA Channel Read and Write Chunk Size */ | |
#define HSMCI_DMA_CHKSIZE(value) ((HSMCI_DMA_CHKSIZE_Msk & ((value) << HSMCI_DMA_CHKSIZE_Pos))) | |
#define HSMCI_DMA_CHKSIZE_1 (0x0u << 4) /**< \brief (HSMCI_DMA) 1 data available */ | |
#define HSMCI_DMA_CHKSIZE_2 (0x1u << 4) /**< \brief (HSMCI_DMA) 2 data available */ | |
#define HSMCI_DMA_CHKSIZE_4 (0x2u << 4) /**< \brief (HSMCI_DMA) 4 data available */ | |
#define HSMCI_DMA_CHKSIZE_8 (0x3u << 4) /**< \brief (HSMCI_DMA) 8 data available */ | |
#define HSMCI_DMA_CHKSIZE_16 (0x4u << 4) /**< \brief (HSMCI_DMA) 16 data available */ | |
#define HSMCI_DMA_DMAEN (0x1u << 8) /**< \brief (HSMCI_DMA) DMA Hardware Handshaking Enable */ | |
/* -------- HSMCI_CFG : (HSMCI Offset: 0x54) Configuration Register -------- */ | |
#define HSMCI_CFG_FIFOMODE (0x1u << 0) /**< \brief (HSMCI_CFG) HSMCI Internal FIFO control mode */ | |
#define HSMCI_CFG_FERRCTRL (0x1u << 4) /**< \brief (HSMCI_CFG) Flow Error flag reset control mode */ | |
#define HSMCI_CFG_HSMODE (0x1u << 8) /**< \brief (HSMCI_CFG) High Speed Mode */ | |
#define HSMCI_CFG_LSYNC (0x1u << 12) /**< \brief (HSMCI_CFG) Synchronize on the last block */ | |
/* -------- HSMCI_WPMR : (HSMCI Offset: 0xE4) Write Protection Mode Register -------- */ | |
#define HSMCI_WPMR_WPEN (0x1u << 0) /**< \brief (HSMCI_WPMR) Write Protect Enable */ | |
#define HSMCI_WPMR_WPKEY_Pos 8 | |
#define HSMCI_WPMR_WPKEY_Msk (0xffffffu << HSMCI_WPMR_WPKEY_Pos) /**< \brief (HSMCI_WPMR) Write Protect Key */ | |
#define HSMCI_WPMR_WPKEY(value) ((HSMCI_WPMR_WPKEY_Msk & ((value) << HSMCI_WPMR_WPKEY_Pos))) | |
#define HSMCI_WPMR_WPKEY_PASSWD (0x4D4349u << 8) /**< \brief (HSMCI_WPMR) Writing any other value in this field aborts the write operation of the WPEN bit.Always reads as 0. */ | |
/* -------- HSMCI_WPSR : (HSMCI Offset: 0xE8) Write Protection Status Register -------- */ | |
#define HSMCI_WPSR_WPVS (0x1u << 0) /**< \brief (HSMCI_WPSR) Write Protection Violation Status */ | |
#define HSMCI_WPSR_WPVSRC_Pos 8 | |
#define HSMCI_WPSR_WPVSRC_Msk (0xffffu << HSMCI_WPSR_WPVSRC_Pos) /**< \brief (HSMCI_WPSR) Write Protection Violation Source */ | |
/* -------- HSMCI_FIFO[256] : (HSMCI Offset: 0x200) FIFO Memory Aperture0 -------- */ | |
#define HSMCI_FIFO_DATA_Pos 0 | |
#define HSMCI_FIFO_DATA_Msk (0xffffffffu << HSMCI_FIFO_DATA_Pos) /**< \brief (HSMCI_FIFO[256]) Data to Read or Data to Write */ | |
#define HSMCI_FIFO_DATA(value) ((HSMCI_FIFO_DATA_Msk & ((value) << HSMCI_FIFO_DATA_Pos))) | |
/*@}*/ | |
#endif /* _SAMV71_HSMCI_COMPONENT_ */ |