/* ---------------------------------------------------------------------------- */ | |
/* Atmel Microcontroller Software Support */ | |
/* SAM Software Package License */ | |
/* ---------------------------------------------------------------------------- */ | |
/* Copyright (c) 2014, Atmel Corporation */ | |
/* */ | |
/* All rights reserved. */ | |
/* */ | |
/* Redistribution and use in source and binary forms, with or without */ | |
/* modification, are permitted provided that the following condition is met: */ | |
/* */ | |
/* - Redistributions of source code must retain the above copyright notice, */ | |
/* this list of conditions and the disclaimer below. */ | |
/* */ | |
/* Atmel's name may not be used to endorse or promote products derived from */ | |
/* this software without specific prior written permission. */ | |
/* */ | |
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */ | |
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */ | |
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */ | |
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */ | |
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */ | |
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */ | |
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */ | |
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */ | |
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ | |
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ | |
/* ---------------------------------------------------------------------------- */ | |
#ifndef _SAMV71_USART1_INSTANCE_ | |
#define _SAMV71_USART1_INSTANCE_ | |
/* ========== Register definition for USART1 peripheral ========== */ | |
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) | |
#define REG_USART1_CR (0x40028000U) /**< \brief (USART1) Control Register */ | |
#define REG_USART1_MR (0x40028004U) /**< \brief (USART1) Mode Register */ | |
#define REG_USART1_IER (0x40028008U) /**< \brief (USART1) Interrupt Enable Register */ | |
#define REG_USART1_IDR (0x4002800CU) /**< \brief (USART1) Interrupt Disable Register */ | |
#define REG_USART1_IMR (0x40028010U) /**< \brief (USART1) Interrupt Mask Register */ | |
#define REG_USART1_CSR (0x40028014U) /**< \brief (USART1) Channel Status Register */ | |
#define REG_USART1_RHR (0x40028018U) /**< \brief (USART1) Receive Holding Register */ | |
#define REG_USART1_THR (0x4002801CU) /**< \brief (USART1) Transmit Holding Register */ | |
#define REG_USART1_BRGR (0x40028020U) /**< \brief (USART1) Baud Rate Generator Register */ | |
#define REG_USART1_RTOR (0x40028024U) /**< \brief (USART1) Receiver Time-out Register */ | |
#define REG_USART1_TTGR (0x40028028U) /**< \brief (USART1) Transmitter Timeguard Register */ | |
#define REG_USART1_MAN (0x40028050U) /**< \brief (USART1) Manchester Configuration Register */ | |
#define REG_USART1_LINMR (0x40028054U) /**< \brief (USART1) LIN Mode Register */ | |
#define REG_USART1_LINIR (0x40028058U) /**< \brief (USART1) LIN Identifier Register */ | |
#define REG_USART1_LINBRR (0x4002805CU) /**< \brief (USART1) LIN Baud Rate Register */ | |
#define REG_USART1_LONMR (0x40028060U) /**< \brief (USART1) LON Mode Register */ | |
#define REG_USART1_LONPR (0x40028064U) /**< \brief (USART1) LON Preamble Register */ | |
#define REG_USART1_LONDL (0x40028068U) /**< \brief (USART1) LON Data Length Register */ | |
#define REG_USART1_LONL2HDR (0x4002806CU) /**< \brief (USART1) LON L2HDR Register */ | |
#define REG_USART1_LONBL (0x40028070U) /**< \brief (USART1) LON Backlog Register */ | |
#define REG_USART1_LONB1TX (0x40028074U) /**< \brief (USART1) LON Beta1 Tx Register */ | |
#define REG_USART1_LONB1RX (0x40028078U) /**< \brief (USART1) LON Beta1 Rx Register */ | |
#define REG_USART1_LONPRIO (0x4002807CU) /**< \brief (USART1) LON Priority Register */ | |
#define REG_USART1_IDTTX (0x40028080U) /**< \brief (USART1) LON IDT Tx Register */ | |
#define REG_USART1_IDTRX (0x40028084U) /**< \brief (USART1) LON IDT Rx Register */ | |
#define REG_USART1_ICDIFF (0x40028088U) /**< \brief (USART1) IC DIFF Register */ | |
#define REG_USART1_WPMR (0x400280E4U) /**< \brief (USART1) Write Protection Mode Register */ | |
#define REG_USART1_WPSR (0x400280E8U) /**< \brief (USART1) Write Protection Status Register */ | |
#else | |
#define REG_USART1_CR (*(__O uint32_t*)0x40028000U) /**< \brief (USART1) Control Register */ | |
#define REG_USART1_MR (*(__IO uint32_t*)0x40028004U) /**< \brief (USART1) Mode Register */ | |
#define REG_USART1_IER (*(__O uint32_t*)0x40028008U) /**< \brief (USART1) Interrupt Enable Register */ | |
#define REG_USART1_IDR (*(__O uint32_t*)0x4002800CU) /**< \brief (USART1) Interrupt Disable Register */ | |
#define REG_USART1_IMR (*(__I uint32_t*)0x40028010U) /**< \brief (USART1) Interrupt Mask Register */ | |
#define REG_USART1_CSR (*(__I uint32_t*)0x40028014U) /**< \brief (USART1) Channel Status Register */ | |
#define REG_USART1_RHR (*(__I uint32_t*)0x40028018U) /**< \brief (USART1) Receive Holding Register */ | |
#define REG_USART1_THR (*(__O uint32_t*)0x4002801CU) /**< \brief (USART1) Transmit Holding Register */ | |
#define REG_USART1_BRGR (*(__IO uint32_t*)0x40028020U) /**< \brief (USART1) Baud Rate Generator Register */ | |
#define REG_USART1_RTOR (*(__IO uint32_t*)0x40028024U) /**< \brief (USART1) Receiver Time-out Register */ | |
#define REG_USART1_TTGR (*(__IO uint32_t*)0x40028028U) /**< \brief (USART1) Transmitter Timeguard Register */ | |
#define REG_USART1_MAN (*(__IO uint32_t*)0x40028050U) /**< \brief (USART1) Manchester Configuration Register */ | |
#define REG_USART1_LINMR (*(__IO uint32_t*)0x40028054U) /**< \brief (USART1) LIN Mode Register */ | |
#define REG_USART1_LINIR (*(__IO uint32_t*)0x40028058U) /**< \brief (USART1) LIN Identifier Register */ | |
#define REG_USART1_LINBRR (*(__I uint32_t*)0x4002805CU) /**< \brief (USART1) LIN Baud Rate Register */ | |
#define REG_USART1_LONMR (*(__IO uint32_t*)0x40028060U) /**< \brief (USART1) LON Mode Register */ | |
#define REG_USART1_LONPR (*(__IO uint32_t*)0x40028064U) /**< \brief (USART1) LON Preamble Register */ | |
#define REG_USART1_LONDL (*(__IO uint32_t*)0x40028068U) /**< \brief (USART1) LON Data Length Register */ | |
#define REG_USART1_LONL2HDR (*(__IO uint32_t*)0x4002806CU) /**< \brief (USART1) LON L2HDR Register */ | |
#define REG_USART1_LONBL (*(__I uint32_t*)0x40028070U) /**< \brief (USART1) LON Backlog Register */ | |
#define REG_USART1_LONB1TX (*(__IO uint32_t*)0x40028074U) /**< \brief (USART1) LON Beta1 Tx Register */ | |
#define REG_USART1_LONB1RX (*(__IO uint32_t*)0x40028078U) /**< \brief (USART1) LON Beta1 Rx Register */ | |
#define REG_USART1_LONPRIO (*(__IO uint32_t*)0x4002807CU) /**< \brief (USART1) LON Priority Register */ | |
#define REG_USART1_IDTTX (*(__IO uint32_t*)0x40028080U) /**< \brief (USART1) LON IDT Tx Register */ | |
#define REG_USART1_IDTRX (*(__IO uint32_t*)0x40028084U) /**< \brief (USART1) LON IDT Rx Register */ | |
#define REG_USART1_ICDIFF (*(__IO uint32_t*)0x40028088U) /**< \brief (USART1) IC DIFF Register */ | |
#define REG_USART1_WPMR (*(__IO uint32_t*)0x400280E4U) /**< \brief (USART1) Write Protection Mode Register */ | |
#define REG_USART1_WPSR (*(__I uint32_t*)0x400280E8U) /**< \brief (USART1) Write Protection Status Register */ | |
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ | |
#endif /* _SAMV71_USART1_INSTANCE_ */ |