/* | |
FreeRTOS.org V5.1.2 - Copyright (C) 2003-2009 Richard Barry. | |
This file is part of the FreeRTOS.org distribution. | |
FreeRTOS.org is free software; you can redistribute it and/or modify | |
it under the terms of the GNU General Public License as published by | |
the Free Software Foundation; either version 2 of the License, or | |
(at your option) any later version. | |
FreeRTOS.org is distributed in the hope that it will be useful, | |
but WITHOUT ANY WARRANTY; without even the implied warranty of | |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
GNU General Public License for more details. | |
You should have received a copy of the GNU General Public License | |
along with FreeRTOS.org; if not, write to the Free Software | |
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
A special exception to the GPL can be applied should you wish to distribute | |
a combined work that includes FreeRTOS.org, without being obliged to provide | |
the source code for any proprietary components. See the licensing section | |
of http://www.FreeRTOS.org for full details of how and when the exception | |
can be applied. | |
*************************************************************************** | |
*************************************************************************** | |
* * | |
* Get the FreeRTOS eBook! See http://www.FreeRTOS.org/Documentation * | |
* * | |
* This is a concise, step by step, 'hands on' guide that describes both * | |
* general multitasking concepts and FreeRTOS specifics. It presents and * | |
* explains numerous examples that are written using the FreeRTOS API. * | |
* Full source code for all the examples is provided in an accompanying * | |
* .zip file. * | |
* * | |
*************************************************************************** | |
*************************************************************************** | |
Please ensure to read the configuration and relevant port sections of the | |
online documentation. | |
http://www.FreeRTOS.org - Documentation, latest information, license and | |
contact details. | |
http://www.SafeRTOS.com - A version that is certified for use in safety | |
critical systems. | |
http://www.OpenRTOS.com - Commercial support, development, porting, | |
licensing and training services. | |
*/ | |
#ifndef I2C_H | |
#define I2C_H | |
/* Structure used to capture the I2C message details. The structure is then | |
* queued for processing by the I2C ISR. | |
*/ | |
typedef struct AN_I2C_MESSAGE | |
{ | |
portLONG lMessageLength; /*< How many bytes of data to send or received - excluding the buffer address. */ | |
unsigned portCHAR ucSlaveAddress; /*< The slave address of the WIZnet on the I2C bus. */ | |
unsigned portCHAR ucBufferAddressLowByte; /*< The address within the WIZnet device to which data should be read from / written to. */ | |
unsigned portCHAR ucBufferAddressHighByte; /*< As above, high byte. */ | |
xSemaphoreHandle xMessageCompleteSemaphore; /*< Contains a reference to a semaphore if the application tasks wants notifying when the message has been transacted. */ | |
unsigned portCHAR *pucBuffer; /*< Pointer to the buffer from where data will be read for transmission, or into which received data will be placed. */ | |
} xI2CMessage; | |
/* Constants to use as the ulDirection parameter of i2cMessage(). */ | |
#define i2cWRITE ( ( unsigned portLONG ) 0 ) | |
#define i2cREAD ( ( unsigned portLONG ) 1 ) | |
/** | |
* Must be called once before any calls to i2cMessage. | |
*/ | |
void i2cInit( void ); | |
/** | |
* Send or receive a message over the I2C bus. | |
* | |
* @param pucMessage The data to be transmitted or the buffer into which | |
* received data will be placed. | |
* | |
* @param lMessageLength The number of bytes to either transmit or receive. | |
* | |
* @param ucSlaveAddress The slave address of the WIZNet device on the I2C bus. | |
* | |
* @param usBufferAddress The address within the WIZNet device to which data is | |
* either written to or read from. The WIZnet has it's | |
* own Rx and Tx buffers. | |
* | |
* @param ulDirection Must be either i2cWRITE or i2cREAD as #defined above. | |
* | |
* @param xMessageCompleteSemaphore | |
* Can be used to pass a semaphore reference if the | |
* calling task want notification of when the message has | |
* completed. Otherwise NULL can be passed. | |
* | |
* @param xBlockTime The time to wait for a space in the message queue to | |
* become available should one not be available | |
* immediately. | |
*/ | |
void i2cMessage( const unsigned portCHAR * const pucMessage, portLONG lMessageLength, unsigned portCHAR ucSlaveAddress, unsigned portSHORT usBufferAddress, unsigned portLONG ulDirection, xSemaphoreHandle xMessageCompleteSemaphore, portTickType xBlockTime ); | |
#endif | |