| /** | |
| * \file camellia.h | |
| * | |
| * \brief Camellia block cipher | |
| */ | |
| /* | |
| * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved | |
| * SPDX-License-Identifier: Apache-2.0 | |
| * | |
| * Licensed under the Apache License, Version 2.0 (the "License"); you may | |
| * not use this file except in compliance with the License. | |
| * You may obtain a copy of the License at | |
| * | |
| * http://www.apache.org/licenses/LICENSE-2.0 | |
| * | |
| * Unless required by applicable law or agreed to in writing, software | |
| * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT | |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| * See the License for the specific language governing permissions and | |
| * limitations under the License. | |
| * | |
| * This file is part of mbed TLS (https://tls.mbed.org) | |
| */ | |
| #ifndef MBEDTLS_CAMELLIA_H | |
| #define MBEDTLS_CAMELLIA_H | |
| #if !defined(MBEDTLS_CONFIG_FILE) | |
| #include "config.h" | |
| #else | |
| #include MBEDTLS_CONFIG_FILE | |
| #endif | |
| #include <stddef.h> | |
| #include <stdint.h> | |
| #include "platform_util.h" | |
| #define MBEDTLS_CAMELLIA_ENCRYPT 1 | |
| #define MBEDTLS_CAMELLIA_DECRYPT 0 | |
| #if !defined(MBEDTLS_DEPRECATED_REMOVED) | |
| #define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH MBEDTLS_DEPRECATED_NUMERIC_CONSTANT( -0x0024 ) | |
| #endif /* !MBEDTLS_DEPRECATED_REMOVED */ | |
| #define MBEDTLS_ERR_CAMELLIA_BAD_INPUT_DATA -0x0024 /**< Bad input data. */ | |
| #define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH -0x0026 /**< Invalid data input length. */ | |
| /* MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED is deprecated and should not be used. | |
| */ | |
| #define MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED -0x0027 /**< Camellia hardware accelerator failed. */ | |
| #ifdef __cplusplus | |
| extern "C" { | |
| #endif | |
| #if !defined(MBEDTLS_CAMELLIA_ALT) | |
| // Regular implementation | |
| // | |
| /** | |
| * \brief CAMELLIA context structure | |
| */ | |
| typedef struct mbedtls_camellia_context | |
| { | |
| int nr; /*!< number of rounds */ | |
| uint32_t rk[68]; /*!< CAMELLIA round keys */ | |
| } | |
| mbedtls_camellia_context; | |
| #else /* MBEDTLS_CAMELLIA_ALT */ | |
| #include "camellia_alt.h" | |
| #endif /* MBEDTLS_CAMELLIA_ALT */ | |
| /** | |
| * \brief Initialize a CAMELLIA context. | |
| * | |
| * \param ctx The CAMELLIA context to be initialized. | |
| * This must not be \c NULL. | |
| */ | |
| void mbedtls_camellia_init( mbedtls_camellia_context *ctx ); | |
| /** | |
| * \brief Clear a CAMELLIA context. | |
| * | |
| * \param ctx The CAMELLIA context to be cleared. This may be \c NULL, | |
| * in which case this function returns immediately. If it is not | |
| * \c NULL, it must be initialized. | |
| */ | |
| void mbedtls_camellia_free( mbedtls_camellia_context *ctx ); | |
| /** | |
| * \brief Perform a CAMELLIA key schedule operation for encryption. | |
| * | |
| * \param ctx The CAMELLIA context to use. This must be initialized. | |
| * \param key The encryption key to use. This must be a readable buffer | |
| * of size \p keybits Bits. | |
| * \param keybits The length of \p key in Bits. This must be either \c 128, | |
| * \c 192 or \c 256. | |
| * | |
| * \return \c 0 if successful. | |
| * \return A negative error code on failure. | |
| */ | |
| int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx, | |
| const unsigned char *key, | |
| unsigned int keybits ); | |
| /** | |
| * \brief Perform a CAMELLIA key schedule operation for decryption. | |
| * | |
| * \param ctx The CAMELLIA context to use. This must be initialized. | |
| * \param key The decryption key. This must be a readable buffer | |
| * of size \p keybits Bits. | |
| * \param keybits The length of \p key in Bits. This must be either \c 128, | |
| * \c 192 or \c 256. | |
| * | |
| * \return \c 0 if successful. | |
| * \return A negative error code on failure. | |
| */ | |
| int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx, | |
| const unsigned char *key, | |
| unsigned int keybits ); | |
| /** | |
| * \brief Perform a CAMELLIA-ECB block encryption/decryption operation. | |
| * | |
| * \param ctx The CAMELLIA context to use. This must be initialized | |
| * and bound to a key. | |
| * \param mode The mode of operation. This must be either | |
| * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. | |
| * \param input The input block. This must be a readable buffer | |
| * of size \c 16 Bytes. | |
| * \param output The output block. This must be a writable buffer | |
| * of size \c 16 Bytes. | |
| * | |
| * \return \c 0 if successful. | |
| * \return A negative error code on failure. | |
| */ | |
| int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx, | |
| int mode, | |
| const unsigned char input[16], | |
| unsigned char output[16] ); | |
| #if defined(MBEDTLS_CIPHER_MODE_CBC) | |
| /** | |
| * \brief Perform a CAMELLIA-CBC buffer encryption/decryption operation. | |
| * | |
| * \note Upon exit, the content of the IV is updated so that you can | |
| * call the function same function again on the following | |
| * block(s) of data and get the same result as if it was | |
| * encrypted in one call. This allows a "streaming" usage. | |
| * If on the other hand you need to retain the contents of the | |
| * IV, you should either save it manually or use the cipher | |
| * module instead. | |
| * | |
| * \param ctx The CAMELLIA context to use. This must be initialized | |
| * and bound to a key. | |
| * \param mode The mode of operation. This must be either | |
| * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. | |
| * \param length The length in Bytes of the input data \p input. | |
| * This must be a multiple of \c 16 Bytes. | |
| * \param iv The initialization vector. This must be a read/write buffer | |
| * of length \c 16 Bytes. It is updated to allow streaming | |
| * use as explained above. | |
| * \param input The buffer holding the input data. This must point to a | |
| * readable buffer of length \p length Bytes. | |
| * \param output The buffer holding the output data. This must point to a | |
| * writable buffer of length \p length Bytes. | |
| * | |
| * \return \c 0 if successful. | |
| * \return A negative error code on failure. | |
| */ | |
| int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx, | |
| int mode, | |
| size_t length, | |
| unsigned char iv[16], | |
| const unsigned char *input, | |
| unsigned char *output ); | |
| #endif /* MBEDTLS_CIPHER_MODE_CBC */ | |
| #if defined(MBEDTLS_CIPHER_MODE_CFB) | |
| /** | |
| * \brief Perform a CAMELLIA-CFB128 buffer encryption/decryption | |
| * operation. | |
| * | |
| * \note Due to the nature of CFB mode, you should use the same | |
| * key for both encryption and decryption. In particular, calls | |
| * to this function should be preceded by a key-schedule via | |
| * mbedtls_camellia_setkey_enc() regardless of whether \p mode | |
| * is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. | |
| * | |
| * \note Upon exit, the content of the IV is updated so that you can | |
| * call the function same function again on the following | |
| * block(s) of data and get the same result as if it was | |
| * encrypted in one call. This allows a "streaming" usage. | |
| * If on the other hand you need to retain the contents of the | |
| * IV, you should either save it manually or use the cipher | |
| * module instead. | |
| * | |
| * \param ctx The CAMELLIA context to use. This must be initialized | |
| * and bound to a key. | |
| * \param mode The mode of operation. This must be either | |
| * #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. | |
| * \param length The length of the input data \p input. Any value is allowed. | |
| * \param iv_off The current offset in the IV. This must be smaller | |
| * than \c 16 Bytes. It is updated after this call to allow | |
| * the aforementioned streaming usage. | |
| * \param iv The initialization vector. This must be a read/write buffer | |
| * of length \c 16 Bytes. It is updated after this call to | |
| * allow the aforementioned streaming usage. | |
| * \param input The buffer holding the input data. This must be a readable | |
| * buffer of size \p length Bytes. | |
| * \param output The buffer to hold the output data. This must be a writable | |
| * buffer of length \p length Bytes. | |
| * | |
| * \return \c 0 if successful. | |
| * \return A negative error code on failure. | |
| */ | |
| int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx, | |
| int mode, | |
| size_t length, | |
| size_t *iv_off, | |
| unsigned char iv[16], | |
| const unsigned char *input, | |
| unsigned char *output ); | |
| #endif /* MBEDTLS_CIPHER_MODE_CFB */ | |
| #if defined(MBEDTLS_CIPHER_MODE_CTR) | |
| /** | |
| * \brief Perform a CAMELLIA-CTR buffer encryption/decryption operation. | |
| * | |
| * *note Due to the nature of CTR mode, you should use the same | |
| * key for both encryption and decryption. In particular, calls | |
| * to this function should be preceded by a key-schedule via | |
| * mbedtls_camellia_setkey_enc() regardless of whether \p mode | |
| * is #MBEDTLS_CAMELLIA_ENCRYPT or #MBEDTLS_CAMELLIA_DECRYPT. | |
| * | |
| * \warning You must never reuse a nonce value with the same key. Doing so | |
| * would void the encryption for the two messages encrypted with | |
| * the same nonce and key. | |
| * | |
| * There are two common strategies for managing nonces with CTR: | |
| * | |
| * 1. You can handle everything as a single message processed over | |
| * successive calls to this function. In that case, you want to | |
| * set \p nonce_counter and \p nc_off to 0 for the first call, and | |
| * then preserve the values of \p nonce_counter, \p nc_off and \p | |
| * stream_block across calls to this function as they will be | |
| * updated by this function. | |
| * | |
| * With this strategy, you must not encrypt more than 2**128 | |
| * blocks of data with the same key. | |
| * | |
| * 2. You can encrypt separate messages by dividing the \p | |
| * nonce_counter buffer in two areas: the first one used for a | |
| * per-message nonce, handled by yourself, and the second one | |
| * updated by this function internally. | |
| * | |
| * For example, you might reserve the first \c 12 Bytes for the | |
| * per-message nonce, and the last \c 4 Bytes for internal use. | |
| * In that case, before calling this function on a new message you | |
| * need to set the first \c 12 Bytes of \p nonce_counter to your | |
| * chosen nonce value, the last four to \c 0, and \p nc_off to \c 0 | |
| * (which will cause \p stream_block to be ignored). That way, you | |
| * can encrypt at most \c 2**96 messages of up to \c 2**32 blocks | |
| * each with the same key. | |
| * | |
| * The per-message nonce (or information sufficient to reconstruct | |
| * it) needs to be communicated with the ciphertext and must be | |
| * unique. The recommended way to ensure uniqueness is to use a | |
| * message counter. An alternative is to generate random nonces, | |
| * but this limits the number of messages that can be securely | |
| * encrypted: for example, with 96-bit random nonces, you should | |
| * not encrypt more than 2**32 messages with the same key. | |
| * | |
| * Note that for both stategies, sizes are measured in blocks and | |
| * that a CAMELLIA block is \c 16 Bytes. | |
| * | |
| * \warning Upon return, \p stream_block contains sensitive data. Its | |
| * content must not be written to insecure storage and should be | |
| * securely discarded as soon as it's no longer needed. | |
| * | |
| * \param ctx The CAMELLIA context to use. This must be initialized | |
| * and bound to a key. | |
| * \param length The length of the input data \p input in Bytes. | |
| * Any value is allowed. | |
| * \param nc_off The offset in the current \p stream_block (for resuming | |
| * within current cipher stream). The offset pointer to | |
| * should be \c 0 at the start of a stream. It is updated | |
| * at the end of this call. | |
| * \param nonce_counter The 128-bit nonce and counter. This must be a read/write | |
| * buffer of length \c 16 Bytes. | |
| * \param stream_block The saved stream-block for resuming. This must be a | |
| * read/write buffer of length \c 16 Bytes. | |
| * \param input The input data stream. This must be a readable buffer of | |
| * size \p length Bytes. | |
| * \param output The output data stream. This must be a writable buffer | |
| * of size \p length Bytes. | |
| * | |
| * \return \c 0 if successful. | |
| * \return A negative error code on failure. | |
| */ | |
| int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx, | |
| size_t length, | |
| size_t *nc_off, | |
| unsigned char nonce_counter[16], | |
| unsigned char stream_block[16], | |
| const unsigned char *input, | |
| unsigned char *output ); | |
| #endif /* MBEDTLS_CIPHER_MODE_CTR */ | |
| #if defined(MBEDTLS_SELF_TEST) | |
| /** | |
| * \brief Checkup routine | |
| * | |
| * \return 0 if successful, or 1 if the test failed | |
| */ | |
| int mbedtls_camellia_self_test( int verbose ); | |
| #endif /* MBEDTLS_SELF_TEST */ | |
| #ifdef __cplusplus | |
| } | |
| #endif | |
| #endif /* camellia.h */ |