| /* | |
| * FreeRTOS Kernel V10.3.0 | |
| * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a copy of | |
| * this software and associated documentation files (the "Software"), to deal in | |
| * the Software without restriction, including without limitation the rights to | |
| * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of | |
| * the Software, and to permit persons to whom the Software is furnished to do so, | |
| * subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice shall be included in all | |
| * copies or substantial portions of the Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS | |
| * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR | |
| * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
| * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
| * | |
| * http://www.FreeRTOS.org | |
| * http://aws.amazon.com/freertos | |
| * | |
| * 1 tab == 4 spaces! | |
| */ | |
| #ifndef FREERTOS_CONFIG_H | |
| #define FREERTOS_CONFIG_H | |
| /*----------------------------------------------------------- | |
| * Application specific definitions. | |
| * | |
| * These definitions should be adjusted for your particular hardware and | |
| * application requirements. | |
| * | |
| * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE | |
| * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. | |
| * http://www.freertos.org/a00110.html | |
| * | |
| * The bottom of this file contains some constants specific to running the UDP | |
| * stack in this demo. Constants specific to FreeRTOS+TCP itself (rather than | |
| * the demo) are contained in FreeRTOSIPConfig.h. | |
| *----------------------------------------------------------*/ | |
| #define configUSE_PREEMPTION 1 | |
| #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 | |
| #define configMAX_PRIORITIES ( 7 ) | |
| #define configTICK_RATE_HZ ( 1000 ) /* In this non-real time simulated environment the tick frequency has to be at least a multiple of the Win32 tick frequency, and therefore very slow. */ | |
| #define configMINIMAL_STACK_SIZE ( ( unsigned short ) 60 ) /* In this simulated case, the stack only has to hold one small structure as the real stack is part of the Win32 thread. */ | |
| #define configTOTAL_HEAP_SIZE ( ( size_t ) ( 2048U * 1024U ) ) | |
| #define configMAX_TASK_NAME_LEN ( 15 ) | |
| #define configUSE_TRACE_FACILITY 1 | |
| #define configUSE_16_BIT_TICKS 0 | |
| #define configIDLE_SHOULD_YIELD 1 | |
| #define configUSE_CO_ROUTINES 0 | |
| #define configUSE_MUTEXES 1 | |
| #define configUSE_RECURSIVE_MUTEXES 1 | |
| #define configQUEUE_REGISTRY_SIZE 0 | |
| #define configUSE_APPLICATION_TASK_TAG 0 | |
| #define configUSE_COUNTING_SEMAPHORES 1 | |
| #define configUSE_ALTERNATIVE_API 0 | |
| #define configNUM_THREAD_LOCAL_STORAGE_POINTERS 0 | |
| #define configENABLE_BACKWARD_COMPATIBILITY 1 | |
| #define configSUPPORT_STATIC_ALLOCATION 1 | |
| /* Hook function related definitions. */ | |
| #define configUSE_TICK_HOOK 0 | |
| #define configUSE_IDLE_HOOK 0 | |
| #define configUSE_MALLOC_FAILED_HOOK 0 | |
| #define configCHECK_FOR_STACK_OVERFLOW 0 /* Not applicable to the Win32 port. */ | |
| /* Software timer related definitions. */ | |
| #define configUSE_TIMERS 1 | |
| #define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) | |
| #define configTIMER_QUEUE_LENGTH 5 | |
| #define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 2 ) | |
| /* Event group related definitions. */ | |
| #define configUSE_EVENT_GROUPS 1 | |
| /* Run time stats gathering definitions. */ | |
| #define configGENERATE_RUN_TIME_STATS 0 | |
| /* Co-routine definitions. */ | |
| #define configUSE_CO_ROUTINES 0 | |
| #define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) | |
| /* Set the following definitions to 1 to include the API function, or zero | |
| to exclude the API function. */ | |
| #define INCLUDE_vTaskPrioritySet 1 | |
| #define INCLUDE_uxTaskPriorityGet 1 | |
| #define INCLUDE_vTaskDelete 1 | |
| #define INCLUDE_vTaskCleanUpResources 0 | |
| #define INCLUDE_vTaskSuspend 1 | |
| #define INCLUDE_vTaskDelayUntil 1 | |
| #define INCLUDE_vTaskDelay 1 | |
| #define INCLUDE_uxTaskGetStackHighWaterMark 1 | |
| #define INCLUDE_xTaskGetSchedulerState 1 | |
| #define INCLUDE_xTimerGetTimerTaskHandle 0 | |
| #define INCLUDE_xTaskGetIdleTaskHandle 0 | |
| #define INCLUDE_xQueueGetMutexHolder 1 | |
| #define INCLUDE_eTaskGetState 1 | |
| #define INCLUDE_xEventGroupSetBitsFromISR 1 | |
| #define INCLUDE_xTimerPendFunctionCall 1 | |
| #define INCLUDE_pcTaskGetTaskName 1 | |
| /* This demo makes use of one or more example stats formatting functions. These | |
| format the raw data provided by the uxTaskGetSystemState() function in to human | |
| readable ASCII form. See the notes in the implementation of vTaskList() within | |
| FreeRTOS/Source/tasks.c for limitations. configUSE_STATS_FORMATTING_FUNCTIONS | |
| is set to 2 so the formatting functions are included without the stdio.h being | |
| included in tasks.c. That is because this project defines its own sprintf() | |
| functions. */ | |
| #define configUSE_STATS_FORMATTING_FUNCTIONS 1 | |
| /* Assert call defined for debug builds. */ | |
| #ifdef _DEBUG | |
| extern void vAssertCalled( const char *pcFile, uint32_t ulLine ); | |
| #define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ ) | |
| #endif /* _DEBUG */ | |
| /* Application specific definitions follow. **********************************/ | |
| /* Only used when running in the FreeRTOS Windows simulator. Defines the | |
| priority of the task used to simulate Ethernet interrupts. */ | |
| #define configMAC_ISR_SIMULATOR_PRIORITY ( configMAX_PRIORITIES - 1 ) | |
| /* This demo creates a virtual network connection by accessing the raw Ethernet | |
| or WiFi data to and from a real network connection. Many computers have more | |
| than one real network port, and configNETWORK_INTERFACE_TO_USE is used to tell | |
| the demo which real port should be used to create the virtual port. The ports | |
| available are displayed on the console when the application is executed. For | |
| example, on my development laptop setting configNETWORK_INTERFACE_TO_USE to 4 | |
| results in the wired network being used, while setting | |
| configNETWORK_INTERFACE_TO_USE to 2 results in the wireless network being | |
| used. */ | |
| #define configNETWORK_INTERFACE_TO_USE 2L | |
| /* The address of an echo server is only left in this project as it doubles as | |
| the address to which logging is sent should UDP logging be enabled. */ | |
| #define configECHO_SERVER_ADDR0 192 | |
| #define configECHO_SERVER_ADDR1 168 | |
| #define configECHO_SERVER_ADDR2 0 | |
| #define configECHO_SERVER_ADDR3 11 | |
| /* Default MAC address configuration. The demo creates a virtual network | |
| connection that uses this MAC address by accessing the raw Ethernet/WiFi data | |
| to and from a real network connection on the host PC. See the | |
| configNETWORK_INTERFACE_TO_USE definition above for information on how to | |
| configure the real network connection to use. */ | |
| #define configMAC_ADDR0 0x00 | |
| #define configMAC_ADDR1 0x11 | |
| #define configMAC_ADDR2 0x11 | |
| #define configMAC_ADDR3 0x11 | |
| #define configMAC_ADDR4 0x11 | |
| #define configMAC_ADDR5 0x41 | |
| /* Default IP address configuration. Used in ipconfigUSE_DNS is set to 0, or | |
| ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ | |
| #define configIP_ADDR0 10 | |
| #define configIP_ADDR1 10 | |
| #define configIP_ADDR2 10 | |
| #define configIP_ADDR3 200 | |
| /* Default gateway IP address configuration. Used in ipconfigUSE_DNS is set to | |
| 0, or ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ | |
| #define configGATEWAY_ADDR0 10 | |
| #define configGATEWAY_ADDR1 10 | |
| #define configGATEWAY_ADDR2 10 | |
| #define configGATEWAY_ADDR3 1 | |
| /* Default DNS server configuration. OpenDNS addresses are 208.67.222.222 and | |
| 208.67.220.220. Used in ipconfigUSE_DNS is set to 0, or ipconfigUSE_DNS is set | |
| to 1 but a DNS server cannot be contacted.*/ | |
| #define configDNS_SERVER_ADDR0 208 | |
| #define configDNS_SERVER_ADDR1 67 | |
| #define configDNS_SERVER_ADDR2 222 | |
| #define configDNS_SERVER_ADDR3 222 | |
| /* Default netmask configuration. Used in ipconfigUSE_DNS is set to 0, or | |
| ipconfigUSE_DNS is set to 1 but a DNS server cannot be contacted. */ | |
| #define configNET_MASK0 255 | |
| #define configNET_MASK1 0 | |
| #define configNET_MASK2 0 | |
| #define configNET_MASK3 0 | |
| /* The UDP port to which print messages are sent. */ | |
| #define configPRINT_PORT ( 15000 ) | |
| #if( defined( _MSC_VER ) && ( _MSC_VER <= 1600 ) && !defined( snprintf ) ) | |
| /* Map to Windows names. */ | |
| #define snprintf _snprintf | |
| #define vsnprintf _vsnprintf | |
| #endif | |
| /* Visual studio does not have an implementation of strcasecmp(). */ | |
| #define strcasecmp _stricmp | |
| #define strncasecmp _strnicmp | |
| #define strcmpi _strcmpi | |
| /* Prototype for the function used to print out. In this case it prints to the | |
| console before the network is connected then a UDP port after the network has | |
| connected. */ | |
| extern void vLoggingPrintf( const char *pcFormatString, ... ); | |
| #define configPRINTF( X ) vLoggingPrintf X | |
| #endif /* FREERTOS_CONFIG_H */ | |