/** | |
* \file sha256.h | |
* | |
* \brief This file contains SHA-224 and SHA-256 definitions and functions. | |
* | |
* The Secure Hash Algorithms 224 and 256 (SHA-224 and SHA-256) cryptographic | |
* hash functions are defined in <em>FIPS 180-4: Secure Hash Standard (SHS)</em>. | |
*/ | |
/* | |
* Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved | |
* SPDX-License-Identifier: Apache-2.0 | |
* | |
* Licensed under the Apache License, Version 2.0 (the "License"); you may | |
* not use this file except in compliance with the License. | |
* You may obtain a copy of the License at | |
* | |
* http://www.apache.org/licenses/LICENSE-2.0 | |
* | |
* Unless required by applicable law or agreed to in writing, software | |
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT | |
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
* See the License for the specific language governing permissions and | |
* limitations under the License. | |
* | |
* This file is part of Mbed TLS (https://tls.mbed.org) | |
*/ | |
#ifndef MBEDTLS_SHA256_H | |
#define MBEDTLS_SHA256_H | |
#if !defined(MBEDTLS_CONFIG_FILE) | |
#include "config.h" | |
#else | |
#include MBEDTLS_CONFIG_FILE | |
#endif | |
#include <stddef.h> | |
#include <stdint.h> | |
/* MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED is deprecated and should not be used. */ | |
#define MBEDTLS_ERR_SHA256_HW_ACCEL_FAILED -0x0037 /**< SHA-256 hardware accelerator failed */ | |
#define MBEDTLS_ERR_SHA256_BAD_INPUT_DATA -0x0074 /**< SHA-256 input data was malformed. */ | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
#if !defined(MBEDTLS_SHA256_ALT) | |
// Regular implementation | |
// | |
/** | |
* \brief The SHA-256 context structure. | |
* | |
* The structure is used both for SHA-256 and for SHA-224 | |
* checksum calculations. The choice between these two is | |
* made in the call to mbedtls_sha256_starts_ret(). | |
*/ | |
typedef struct mbedtls_sha256_context | |
{ | |
uint32_t total[2]; /*!< The number of Bytes processed. */ | |
uint32_t state[8]; /*!< The intermediate digest state. */ | |
unsigned char buffer[64]; /*!< The data block being processed. */ | |
int is224; /*!< Determines which function to use: | |
0: Use SHA-256, or 1: Use SHA-224. */ | |
} | |
mbedtls_sha256_context; | |
#else /* MBEDTLS_SHA256_ALT */ | |
#include "sha256_alt.h" | |
#endif /* MBEDTLS_SHA256_ALT */ | |
/** | |
* \brief This function initializes a SHA-256 context. | |
* | |
* \param ctx The SHA-256 context to initialize. This must not be \c NULL. | |
*/ | |
void mbedtls_sha256_init( mbedtls_sha256_context *ctx ); | |
/** | |
* \brief This function clears a SHA-256 context. | |
* | |
* \param ctx The SHA-256 context to clear. This may be \c NULL, in which | |
* case this function returns immediately. If it is not \c NULL, | |
* it must point to an initialized SHA-256 context. | |
*/ | |
void mbedtls_sha256_free( mbedtls_sha256_context *ctx ); | |
/** | |
* \brief This function clones the state of a SHA-256 context. | |
* | |
* \param dst The destination context. This must be initialized. | |
* \param src The context to clone. This must be initialized. | |
*/ | |
void mbedtls_sha256_clone( mbedtls_sha256_context *dst, | |
const mbedtls_sha256_context *src ); | |
/** | |
* \brief This function starts a SHA-224 or SHA-256 checksum | |
* calculation. | |
* | |
* \param ctx The context to use. This must be initialized. | |
* \param is224 This determines which function to use. This must be | |
* either \c 0 for SHA-256, or \c 1 for SHA-224. | |
* | |
* \return \c 0 on success. | |
* \return A negative error code on failure. | |
*/ | |
int mbedtls_sha256_starts_ret( mbedtls_sha256_context *ctx, int is224 ); | |
/** | |
* \brief This function feeds an input buffer into an ongoing | |
* SHA-256 checksum calculation. | |
* | |
* \param ctx The SHA-256 context. This must be initialized | |
* and have a hash operation started. | |
* \param input The buffer holding the data. This must be a readable | |
* buffer of length \p ilen Bytes. | |
* \param ilen The length of the input data in Bytes. | |
* | |
* \return \c 0 on success. | |
* \return A negative error code on failure. | |
*/ | |
int mbedtls_sha256_update_ret( mbedtls_sha256_context *ctx, | |
const unsigned char *input, | |
size_t ilen ); | |
/** | |
* \brief This function finishes the SHA-256 operation, and writes | |
* the result to the output buffer. | |
* | |
* \param ctx The SHA-256 context. This must be initialized | |
* and have a hash operation started. | |
* \param output The SHA-224 or SHA-256 checksum result. | |
* This must be a writable buffer of length \c 32 Bytes. | |
* | |
* \return \c 0 on success. | |
* \return A negative error code on failure. | |
*/ | |
int mbedtls_sha256_finish_ret( mbedtls_sha256_context *ctx, | |
unsigned char output[32] ); | |
/** | |
* \brief This function processes a single data block within | |
* the ongoing SHA-256 computation. This function is for | |
* internal use only. | |
* | |
* \param ctx The SHA-256 context. This must be initialized. | |
* \param data The buffer holding one block of data. This must | |
* be a readable buffer of length \c 64 Bytes. | |
* | |
* \return \c 0 on success. | |
* \return A negative error code on failure. | |
*/ | |
int mbedtls_internal_sha256_process( mbedtls_sha256_context *ctx, | |
const unsigned char data[64] ); | |
#if !defined(MBEDTLS_DEPRECATED_REMOVED) | |
#if defined(MBEDTLS_DEPRECATED_WARNING) | |
#define MBEDTLS_DEPRECATED __attribute__((deprecated)) | |
#else | |
#define MBEDTLS_DEPRECATED | |
#endif | |
/** | |
* \brief This function starts a SHA-224 or SHA-256 checksum | |
* calculation. | |
* | |
* \deprecated Superseded by mbedtls_sha256_starts_ret() in 2.7.0. | |
* | |
* \param ctx The context to use. This must be initialized. | |
* \param is224 Determines which function to use. This must be | |
* either \c 0 for SHA-256, or \c 1 for SHA-224. | |
*/ | |
MBEDTLS_DEPRECATED void mbedtls_sha256_starts( mbedtls_sha256_context *ctx, | |
int is224 ); | |
/** | |
* \brief This function feeds an input buffer into an ongoing | |
* SHA-256 checksum calculation. | |
* | |
* \deprecated Superseded by mbedtls_sha256_update_ret() in 2.7.0. | |
* | |
* \param ctx The SHA-256 context to use. This must be | |
* initialized and have a hash operation started. | |
* \param input The buffer holding the data. This must be a readable | |
* buffer of length \p ilen Bytes. | |
* \param ilen The length of the input data in Bytes. | |
*/ | |
MBEDTLS_DEPRECATED void mbedtls_sha256_update( mbedtls_sha256_context *ctx, | |
const unsigned char *input, | |
size_t ilen ); | |
/** | |
* \brief This function finishes the SHA-256 operation, and writes | |
* the result to the output buffer. | |
* | |
* \deprecated Superseded by mbedtls_sha256_finish_ret() in 2.7.0. | |
* | |
* \param ctx The SHA-256 context. This must be initialized and | |
* have a hash operation started. | |
* \param output The SHA-224 or SHA-256 checksum result. This must be | |
* a writable buffer of length \c 32 Bytes. | |
*/ | |
MBEDTLS_DEPRECATED void mbedtls_sha256_finish( mbedtls_sha256_context *ctx, | |
unsigned char output[32] ); | |
/** | |
* \brief This function processes a single data block within | |
* the ongoing SHA-256 computation. This function is for | |
* internal use only. | |
* | |
* \deprecated Superseded by mbedtls_internal_sha256_process() in 2.7.0. | |
* | |
* \param ctx The SHA-256 context. This must be initialized. | |
* \param data The buffer holding one block of data. This must be | |
* a readable buffer of size \c 64 Bytes. | |
*/ | |
MBEDTLS_DEPRECATED void mbedtls_sha256_process( mbedtls_sha256_context *ctx, | |
const unsigned char data[64] ); | |
#undef MBEDTLS_DEPRECATED | |
#endif /* !MBEDTLS_DEPRECATED_REMOVED */ | |
/** | |
* \brief This function calculates the SHA-224 or SHA-256 | |
* checksum of a buffer. | |
* | |
* The function allocates the context, performs the | |
* calculation, and frees the context. | |
* | |
* The SHA-256 result is calculated as | |
* output = SHA-256(input buffer). | |
* | |
* \param input The buffer holding the data. This must be a readable | |
* buffer of length \p ilen Bytes. | |
* \param ilen The length of the input data in Bytes. | |
* \param output The SHA-224 or SHA-256 checksum result. This must | |
* be a writable buffer of length \c 32 Bytes. | |
* \param is224 Determines which function to use. This must be | |
* either \c 0 for SHA-256, or \c 1 for SHA-224. | |
*/ | |
int mbedtls_sha256_ret( const unsigned char *input, | |
size_t ilen, | |
unsigned char output[32], | |
int is224 ); | |
#if !defined(MBEDTLS_DEPRECATED_REMOVED) | |
#if defined(MBEDTLS_DEPRECATED_WARNING) | |
#define MBEDTLS_DEPRECATED __attribute__((deprecated)) | |
#else | |
#define MBEDTLS_DEPRECATED | |
#endif | |
/** | |
* \brief This function calculates the SHA-224 or SHA-256 checksum | |
* of a buffer. | |
* | |
* The function allocates the context, performs the | |
* calculation, and frees the context. | |
* | |
* The SHA-256 result is calculated as | |
* output = SHA-256(input buffer). | |
* | |
* \deprecated Superseded by mbedtls_sha256_ret() in 2.7.0. | |
* | |
* \param input The buffer holding the data. This must be a readable | |
* buffer of length \p ilen Bytes. | |
* \param ilen The length of the input data in Bytes. | |
* \param output The SHA-224 or SHA-256 checksum result. This must be | |
* a writable buffer of length \c 32 Bytes. | |
* \param is224 Determines which function to use. This must be either | |
* \c 0 for SHA-256, or \c 1 for SHA-224. | |
*/ | |
MBEDTLS_DEPRECATED void mbedtls_sha256( const unsigned char *input, | |
size_t ilen, | |
unsigned char output[32], | |
int is224 ); | |
#undef MBEDTLS_DEPRECATED | |
#endif /* !MBEDTLS_DEPRECATED_REMOVED */ | |
#if defined(MBEDTLS_SELF_TEST) | |
/** | |
* \brief The SHA-224 and SHA-256 checkup routine. | |
* | |
* \return \c 0 on success. | |
* \return \c 1 on failure. | |
*/ | |
int mbedtls_sha256_self_test( int verbose ); | |
#endif /* MBEDTLS_SELF_TEST */ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* mbedtls_sha256.h */ |