| /* ---------------------------------------------------------------------------- | |
| * SAM Software Package License | |
| * ---------------------------------------------------------------------------- | |
| * Copyright (c) 2014, Atmel Corporation | |
| * | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * - Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the disclaimer below. | |
| * | |
| * Atmel's name may not be used to endorse or promote products derived from | |
| * this software without specific prior written permission. | |
| * | |
| * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR | |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
| * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, | |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, | |
| * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
| * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, | |
| * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * ---------------------------------------------------------------------------- | |
| */ | |
| /** | |
| * \page samv7_Xplained_ultra_board_desc SAM V71 Xplained Ultra - Board | |
| * Description | |
| * | |
| * \section Purpose | |
| * | |
| * This file is dedicated to describe the SAM V71 Xplained Ultra board. | |
| * | |
| * \section Contents | |
| * | |
| * - For SAM V71 Xplained Ultra board information, see | |
| * \subpage samv7_Xplained_ultra_board_info. | |
| * - For operating frequency information, see \subpage samv7_Xplained_ultra_opfreq. | |
| * - For using portable PIO definitions, see \subpage samv7_Xplained_ultra_piodef. | |
| * - For using GMAC PIO definitions, see \subpage samv7_Xplained_ultra_gmac. | |
| * - For using ISI definitions, see \subpage samv7_Xplained_ultra_isi. | |
| * - For on-board memories, see \subpage samv7_Xplained_ultra_mem. | |
| * - Several USB definitions are included here, | |
| * see \subpage samv7_Xplained_ultra_usb. | |
| * - For External components, see \subpage samv7_Xplained_ultra_extcomp. | |
| * - For Individual chip definition, see \subpage samv7_Xplained_ultra_chipdef. | |
| * | |
| * To get more software details and the full list of parameters related to the | |
| * SAM V71 Xplained Ultra board configuration, please have a look at the source | |
| * file: | |
| * \ref board.h\n | |
| * | |
| * \section Usage | |
| * | |
| * - The code for booting the board is provided by board_cstartup_xxx.c and | |
| * board_lowlevel.c. | |
| * - For using board PIOs, board characteristics (clock, etc.) and external | |
| * components, see board.h. | |
| * - For manipulating memories, see board_memories.h. | |
| * | |
| * This file can be used as a template and modified to fit a custom board, with | |
| * specific PIOs usage or memory connections. | |
| */ | |
| /** | |
| * \file board.h | |
| * | |
| * Definition of SAM V71 Xplained Ultra board characteristics, PIOs and | |
| * external components interface. | |
| */ | |
| #ifndef _BOARD_H_ | |
| #define _BOARD_H_ | |
| /*---------------------------------------------------------------------------- | |
| * Headers | |
| *----------------------------------------------------------------------------*/ | |
| #include "chip.h" | |
| #include "include/board_lowlevel.h" | |
| #include "include/board_memories.h" | |
| #include "include/led.h" | |
| #include "include/gmii.h" | |
| #include "include/gmacb_phy.h" | |
| #include "include/dbg_console.h" | |
| #include "include/bmp.h" | |
| #include "include/lcdd.h" | |
| #include "include/ili9488.h" | |
| #include "include/ili9488_reg.h" | |
| #include "include/ili9488_spi.h" | |
| #include "include/ili9488_ebi.h" | |
| #include "include/ili9488_dma.h" | |
| #include "include/ili9488_spi_dma.h" | |
| #include "include/ili9488_ebi_dma.h" | |
| #include "include/frame_buffer.h" | |
| #include "include/lcd_color.h" | |
| #include "include/lcd_draw.h" | |
| #include "include/lcd_font10x14.h" | |
| #include "include/lcd_font.h" | |
| #include "include/lcd_gimp_image.h" | |
| #include "include/rtc_calib.h" | |
| #include "include/wm8904.h" | |
| #include "include/cs2100.h" | |
| #include "include/s25fl1.h" | |
| #include "include/omnivision.h" | |
| #include "include/ovyuv.h" | |
| #include "include/ov.h" | |
| #include "include/iso7816_4.h" | |
| #if defined ( __GNUC__ ) | |
| #include "include/syscalls.h" | |
| #endif | |
| /*---------------------------------------------------------------------------- | |
| * Definitions | |
| *----------------------------------------------------------------------------*/ | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page samv7_Xplained_ultra_board_info "SAM V71 Xplained Ultra - Board informations" | |
| * This page lists several definition related to the board description. | |
| * | |
| * \section Definitions | |
| * - \ref BOARD_NAME | |
| */ | |
| /** Name of the board */ | |
| #define BOARD_NAME "SAM V71 Xplained Ultra" | |
| #define NO_PUSHBUTTON | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page samv7_Xplained_ultra_opfreq "SAM V71 Xplained Ultra - Operating frequencies" | |
| * This page lists several definition related to the board operating frequency | |
| * (when using the initialization done by board_lowlevel.c). | |
| * | |
| * \section Definitions | |
| * - \ref BOARD_MAINOSC | |
| * - \ref BOARD_MCK | |
| */ | |
| /** Frequency of the board main oscillator */ | |
| #define BOARD_MAINOSC 12000000 | |
| /** Master clock frequency (when using board_lowlevel.c) */ | |
| #define BOARD_MCK 150000000 | |
| #if (BOARD_MCK==132000000 ) | |
| #define PLL_MUL 0x16 | |
| #define PLL_DIV 0x01 | |
| #else // 300MHz(PCK) and 150MHz(MCK) by default | |
| #define PLL_MUL 0x19 | |
| #define PLL_DIV 0x01 | |
| #endif | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page samv7_Xplained_ultra_piodef "SAM V71 Xplained Ultra - PIO definitions" | |
| * This pages lists all the PIOs definitions contained in board.h. The constants | |
| * are named using the following convention: PIN_* for a constant which defines | |
| * a single Pin instance (but may include several PIOs sharing the same | |
| * controller), and PINS_* for a list of Pin instances. | |
| * | |
| * UART0 | |
| * - \ref PINS_UART0 | |
| * | |
| * UART4 | |
| * - \ref PINS_UART4 | |
| * | |
| * LEDs | |
| * - \ref PIN_LED_0 | |
| * - \ref PIN_LED_1 | |
| * - \ref PINS_LEDS | |
| * | |
| * Push buttons | |
| * - \ref PIN_PUSHBUTTON_0 | |
| * - \ref PIN_PUSHBUTTON_1 | |
| * - \ref PINS_PUSHBUTTONS | |
| * - \ref PUSHBUTTON_BP0 | |
| * - \ref PUSHBUTTON_BP1 | |
| * | |
| * PWMC | |
| * - \ref PIN_PWMC_PWMH0 | |
| * - \ref PIN_PWMC_PWMH1 | |
| * - \ref PIN_PWM_LED0 | |
| * - \ref PIN_PWM_LED1 | |
| * - \ref CHANNEL_PWM_LED0 | |
| * - \ref CHANNEL_PWM_LED1 | |
| * | |
| * SPI | |
| * - \ref PIN_SPI_MISO | |
| * - \ref PIN_SPI_MOSI | |
| * - \ref PIN_SPI_SPCK | |
| * - \ref PINS_SPI | |
| * | |
| * PCK0 | |
| * - \ref PIN_PCK0 | |
| * - \ref PIN_PCK1 | |
| * - \ref PIN_PCK2 | |
| * | |
| * PIO PARALLEL CAPTURE | |
| * - \ref PIN_PIODCEN1 | |
| * - \ref PIN_PIODCEN2 | |
| * | |
| * TWI | |
| * - \ref TWI_V3XX | |
| * - \ref PIN_TWI_TWD0 | |
| * - \ref PIN_TWI_TWCK0 | |
| * - \ref PINS_TWI0 | |
| * - \ref PIN_TWI_TWD1 | |
| * - \ref PIN_TWI_TWCK1 | |
| * - \ref PINS_TWI1 | |
| * | |
| * USART0 | |
| * - \ref PIN_USART0_RXD | |
| * - \ref PIN_USART0_TXD | |
| * - \ref PIN_USART0_CTS | |
| * - \ref PIN_USART0_RTS | |
| * - \ref PIN_USART0_SCK | |
| * | |
| * USART1 | |
| * - \ref PIN_USART1_RXD | |
| * - \ref PIN_USART1_TXD | |
| * - \ref PIN_USART1_CTS | |
| * - \ref PIN_USART1_RTS | |
| * - \ref PIN_USART1_SCK | |
| * | |
| * USART2 | |
| * - \ref PIN_USART2_RXD | |
| * - \ref PIN_USART2_TXD | |
| * - \ref PIN_USART2_CTS | |
| * - \ref PIN_USART2_RTS | |
| * - \ref PIN_USART2_SCK | |
| * | |
| * SSC | |
| * - \ref PIN_SSC_TD | |
| * - \ref PIN_SSC_TK | |
| * - \ref PIN_SSC_TF | |
| * - \ref PIN_SSC_RD | |
| * - \ref PIN_SSC_RK | |
| * - \ref PIN_SSC_RF | |
| * - \ref PIN_SSC_TD | |
| * - \ref PINS_SSC_CODEC | |
| * | |
| * MCAN | |
| * - \ref PIN_MCAN0_TXD | |
| * - \ref PIN_MCAN0_RXD | |
| * - \ref PIN_MCAN1_TXD | |
| * - \ref PIN_MCAN1_RXD | |
| */ | |
| /** SSC pin Transmitter Data (TD) */ | |
| #define PIN_SSC_TD {PIO_PD26B_TD, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** SSC pin Transmitter Clock (TK) */ | |
| #define PIN_SSC_TK {PIO_PB1D_TK, PIOB, ID_PIOB, PIO_PERIPH_D, PIO_DEFAULT} | |
| /** SSC pin Transmitter FrameSync (TF) */ | |
| #define PIN_SSC_TF {PIO_PB0D_TF, PIOB, ID_PIOB, PIO_PERIPH_D, PIO_DEFAULT} | |
| /** SSC pin RD */ | |
| #define PIN_SSC_RD {PIO_PA10C_RD, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT} | |
| /** SSC pin RK */ | |
| #define PIN_SSC_RK {PIO_PA22A_RK, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** SSC pin RF */ | |
| #define PIN_SSC_RF {PIO_PD24B_RF, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** SSC pins definition for codec. */ | |
| #define PINS_SSC_CODEC \ | |
| {PIN_SSC_TD, PIN_SSC_TK, PIN_SSC_TF, PIN_SSC_RD, PIN_SSC_RK, PIN_SSC_RF} | |
| /** UART pins (UTXD0 and URXD0) definitions, PA9,10. */ | |
| #define PINS_UART0 \ | |
| {PIO_PA9A_URXD0 | PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** UART pins (UTXD4 and URXD4) definitions, PD19,18. */ | |
| #define PINS_UART4 \ | |
| {PIO_PD18C_URXD4 | PIO_PD19C_UTXD4, PIOD, ID_PIOD, PIO_PERIPH_C, PIO_DEFAULT} | |
| /* LED pins definitions */ | |
| #define LED_YELLOW0 0 | |
| #define LED_YELLOW1 1 | |
| /** LED #0 pin definition (YELLOW). */ | |
| #define PIN_LED_0 {PIO_PA23, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} | |
| /** LED #0 pin definition (YELLOW). */ | |
| #define PIN_LED_1 {PIO_PC9, PIOC, ID_PIOC, PIO_OUTPUT_0, PIO_DEFAULT} | |
| /** List of all LEDs definitions. */ | |
| #define PINS_LEDS {PIN_LED_0, PIN_LED_1} | |
| /** | |
| * Push button #0 definition. | |
| * Attributes = pull-up + debounce + interrupt on rising edge. | |
| */ | |
| #define PIN_PUSHBUTTON_0 \ | |
| {PIO_PA9, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_FALL_EDGE} | |
| /** | |
| * Push button #1 definition. | |
| * Attributes = pull-up + debounce + interrupt on rising edge. | |
| */ | |
| #define PIN_PUSHBUTTON_1 \ | |
| {PIO_PB12, PIOB, ID_PIOB, PIO_INPUT, PIO_PULLUP | PIO_DEBOUNCE | PIO_IT_FALL_EDGE} | |
| /** List of all push button definitions. */ | |
| #define PINS_PUSHBUTTONS {PIN_PUSHBUTTON_0, PIN_PUSHBUTTON_1} | |
| /** Push button #0 index. */ | |
| #define PUSHBUTTON_BP0 0 | |
| /** Push button #1 index. */ | |
| #define PUSHBUTTON_BP1 1 | |
| /** PWMC PWM0 pin definition: Output High. */ | |
| #define PIN_PWMC_PWMH0 {PIO_PD20A_PWMH0, PIOD, ID_PIOD, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** PWMC PWM1 pin definition: Output High. */ | |
| #define PIN_PWMC_PWMH1 {PIO_PD21A_PWMH1, PIOD, ID_PIOD, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** PWM pins definition for LED0 */ | |
| #define PIN_PWM_LED0 PIN_PWMC_PWMH0 | |
| /** PWM pins definition for LED1 */ | |
| #define PIN_PWM_LED1 PIN_PWMC_PWMH1 | |
| /** PWM channel for LED0 */ | |
| #define CHANNEL_PWM_LED0 0 | |
| /** PWM channel for LED1 */ | |
| #define CHANNEL_PWM_LED1 1 | |
| /** SPI MISO pin definition. */ | |
| #define PIN_SPI_MISO {PIO_PD20B_SPI0_MISO, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** SPI MOSI pin definition. */ | |
| #define PIN_SPI_MOSI {PIO_PD21B_SPI0_MOSI, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** SPI SPCK pin definition. */ | |
| #define PIN_SPI_SPCK {PIO_PD22B_SPI0_SPCK, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** SPI chip select pin definition. */ | |
| #define PIN_SPI_NPCS0 {PIO_PB2D_SPI0_NPCS0, PIOB, ID_PIOB, PIO_PERIPH_D, PIO_DEFAULT} | |
| #define PIN_SPI_NPCS1 {PIO_PD25B_SPI0_NPCS1, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| #define PIN_SPI_NPCS3 {PIO_PD27B_SPI0_NPCS3, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** List of SPI pin definitions (MISO, MOSI & SPCK). */ | |
| #define PINS_SPI PIN_SPI_MISO, PIN_SPI_MOSI, PIN_SPI_SPCK | |
| /** PCK0 */ | |
| #define PIN_PCK0 {PIO_PB13B_PCK0, PIOB, ID_PIOB, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** PCK1 */ | |
| #define PIN_PCK1 {PIO_PA17B_PCK1, PIOB, ID_PIOB, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** PCK2 */ | |
| #define PIN_PCK2 {PIO_PA18B_PCK2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** PIO PARALLEL CAPTURE */ | |
| /** Parallel Capture Mode Data Enable1 */ | |
| #define PIN_PIODCEN1 PIO_PA15 | |
| /** Parallel Capture Mode Data Enable2 */ | |
| #define PIN_PIODCEN2 PIO_PA16 | |
| /** TWI version 3.xx */ | |
| #define TWI_V3XX | |
| /** TWI0 data pin */ | |
| #define PIN_TWI_TWD0 {PIO_PA3A_TWD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** TWI0 clock pin */ | |
| #define PIN_TWI_TWCK0 {PIO_PA4A_TWCK0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** TWI0 pins */ | |
| #define PINS_TWI0 {PIN_TWI_TWD0, PIN_TWI_TWCK0} | |
| /** TWI1 data pin */ | |
| #define PIN_TWI_TWD1 {PIO_PB4A_TWD1, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** TWI1 clock pin */ | |
| #define PIN_TWI_TWCK1 {PIO_PB5A_TWCK1, PIOB, ID_PIOB, PIO_PERIPH_A,PIO_DEFAULT} | |
| /** TWI1 pins */ | |
| #define PINS_TWI1 {PIN_TWI_TWD1, PIN_TWI_TWCK1} | |
| /** USART0 pin RX */ | |
| #define PIN_USART0_RXD {PIO_PB0C_RXD0, PIOB, ID_PIOB, PIO_PERIPH_C, PIO_DEFAULT} | |
| /** USART0 pin TX */ | |
| #define PIN_USART0_TXD {PIO_PB1C_TXD0, PIOB, ID_PIOB, PIO_PERIPH_C, PIO_DEFAULT} | |
| /** USART0 pin CTS */ | |
| #define PIN_USART0_CTS {PIO_PB2C_CTS0, PIOB, ID_PIOB, PIO_PERIPH_C, PIO_DEFAULT} | |
| /** USART0 pin RTS */ | |
| #define PIN_USART0_RTS {PIO_PB3C_RTS0, PIOB, ID_PIOB, PIO_PERIPH_C, PIO_DEFAULT} | |
| /** USART0 pin SCK */ | |
| #define PIN_USART0_SCK {PIO_PB13C_SCK0, PIOB, ID_PIOB, PIO_PERIPH_C,PIO_DEFAULT} | |
| /** USART1 pin RX */ | |
| #define PIN_USART1_RXD {PIO_PA21A_RXD1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** USART1 pin TX */ | |
| #define PIN_USART1_TXD {1<<22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** USART1 pin CTS */ | |
| #define PIN_USART1_CTS {PIO_PA25A_CTS1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** USART1 pin RTS */ | |
| #define PIN_USART1_RTS {PIO_PA24A_RTS1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** USART1 pin ENABLE */ | |
| #define PIN_USART1_EN {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} | |
| /** USART1 pin SCK */ | |
| #define PIN_USART1_SCK {PIO_PA23A_SCK1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** USART2 pin RX */ | |
| #define PIN_USART2_RXD {PIO_PD15B_RXD2, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** USART2 pin TX */ | |
| #define PIN_USART2_TXD {PIO_PD16B_TXD2, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** USART2 pin CTS */ | |
| #define PIN_USART2_CTS {PIO_PD19B_CTS2, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** USART2 pin RTS */ | |
| #define PIN_USART2_RTS {PIO_PD18B_RTS2, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** USART2 pin SCK */ | |
| #define PIN_USART2_SCK {PIO_PD17B_SCK2, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /*Pins for USART0 as 7816 mode*/ | |
| /** PIN used for reset the smartcard */ | |
| #define PIN_ISO7816_RSTMC {PIO_PB2C_CTS0, PIOB, ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT} | |
| /** Pins used for connect the smartcard */ | |
| #define PINS_ISO7816 PIN_USART0_TXD, PIN_USART0_SCK,PIN_ISO7816_RSTMC | |
| /** MCAN0 pin Transmit Data (TXD) */ | |
| #define PIN_MCAN0_TXD {PIO_PB2A_CANTX0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** MCAN0 pin Receive Data (RXD) */ | |
| #define PIN_MCAN0_RXD {PIO_PB3A_CANRX0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** MCAN1 pin Transmit Data (TXD) */ | |
| #define PIN_MCAN1_TXD {PIO_PC14C_CANTX1, PIOC, ID_PIOC, PIO_PERIPH_C, PIO_DEFAULT} | |
| /** MCAN1 pin Receive Data (RXD) */ | |
| #define PIN_MCAN1_RXD {PIO_PC12C_CANRX1, PIOC, ID_PIOC, PIO_PERIPH_C, PIO_DEFAULT} | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page samv7_Xplained_ultra_gmac "SAM V71 Xplained Ultra - GMAC" | |
| * \section GMAC | |
| * - \ref BOARD_GMAC_PHY_ADDR | |
| * - \ref BOARD_GMAC_PHY_COMP_KSZ8061RNB | |
| * - \ref BOARD_GMAC_MODE_RMII | |
| * - \ref BOARD_GMAC_PINS | |
| * - \ref BOARD_GMAC_RESET_PIN | |
| * | |
| */ | |
| /** PHY address */ | |
| #define BOARD_GMAC_PHY_ADDR 1 | |
| /** PHY Component */ | |
| #define BOARD_GMAC_PHY_COMP_KSZ8061RNB 1 | |
| /** Board GMAC power control - ALWAYS ON */ | |
| #define BOARD_GMAC_POWER_ALWAYS_ON | |
| /** Board GMAC work mode - RMII/MII ( 1 / 0 ) */ | |
| #define BOARD_GMAC_MODE_RMII 1 | |
| /** The PIN list of PIO for GMAC */ | |
| #define BOARD_GMAC_PINS \ | |
| { (PIO_PD0A_GTXCK | PIO_PD1A_GTXEN | PIO_PD2A_GTX0 | PIO_PD3A_GTX1 \ | |
| | PIO_PD4A_GRXDV | PIO_PD5A_GRX0 | PIO_PD6A_GRX1 | PIO_PD7A_GRXER \ | |
| | PIO_PD8A_GMDC | PIO_PD9A_GMDIO ),PIOD, ID_PIOD, PIO_PERIPH_A, PIO_DEFAULT}, \ | |
| {PIO_PC30, PIOC, ID_PIOC, PIO_INPUT, PIO_PULLUP},\ | |
| {PIO_PA29, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} | |
| /** The PIN list of PIO for GMAC */ | |
| #define BOARD_GMAC_RESET_PIN {PIO_PC10, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_PULLUP} | |
| /** The runtime pin configure list for GMAC */ | |
| #define BOARD_GMAC_RUN_PINS BOARD_GMAC_PINS | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page samv7_Xplained_ultra_isi "SAM V71 Xplained Ultra - ISI" | |
| * This page lists all the IO definitions connected to ISI module. | |
| * ISI | |
| * - \ref PIN_ISI_D0 | |
| * - \ref PIN_ISI_D1 | |
| * - \ref PIN_ISI_D2 | |
| * - \ref PIN_ISI_D3 | |
| * - \ref PIN_ISI_D4 | |
| * - \ref PIN_ISI_D5 | |
| * - \ref PIN_ISI_D6 | |
| * - \ref PIN_ISI_D7 | |
| * - \ref PIN_ISI_D8 | |
| * - \ref PIN_ISI_D9 | |
| * - \ref BOARD_ISI_VSYNC | |
| * - \ref BOARD_ISI_HSYNC | |
| * - \ref BOARD_ISI_PCK | |
| * - \ref BOARD_ISI_PINS | |
| * | |
| */ | |
| #define PIN_ISI_D0 {PIO_PD22D_ISI_D0, PIOD, ID_PIOD, PIO_PERIPH_D, PIO_PULLUP} | |
| #define PIN_ISI_D1 {PIO_PD21D_ISI_D1, PIOD, ID_PIOD, PIO_PERIPH_D, PIO_PULLUP} | |
| #define PIN_ISI_D2 {PIO_PB3D_ISI_D2, PIOB, ID_PIOB, PIO_PERIPH_D, PIO_PULLUP} | |
| #define PIN_ISI_D3 {PIO_PA9B_ISI_D3, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_PULLUP} | |
| #define PIN_ISI_D4 {PIO_PA5B_ISI_D4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_PULLUP} | |
| #define PIN_ISI_D5 {PIO_PD11D_ISI_D5, PIOD, ID_PIOD, PIO_PERIPH_D, PIO_PULLUP} | |
| #define PIN_ISI_D6 {PIO_PD12D_ISI_D6, PIOD, ID_PIOD, PIO_PERIPH_D, PIO_PULLUP} | |
| #define PIN_ISI_D7 {PIO_PA27D_ISI_D7, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_PULLUP} | |
| #define PIN_ISI_D8 {PIO_PD27D_ISI_D8, PIOD, ID_PIOD, PIO_PERIPH_D, PIO_PULLUP} | |
| #define PIN_ISI_D9 {PIO_PD28D_ISI_D9, PIOD, ID_PIOD, PIO_PERIPH_D, PIO_PULLUP} | |
| #define BOARD_ISI_VSYNC {PIO_PD25D_ISI_VSYNC, PIOD, ID_PIOD, PIO_PERIPH_D, PIO_DEFAULT} | |
| #define BOARD_ISI_HSYNC {PIO_PD24D_ISI_HSYNC, PIOD, ID_PIOD, PIO_PERIPH_D, PIO_DEFAULT} | |
| #define BOARD_ISI_PCK {PIO_PA24D_ISI_PCK, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT} | |
| #define BOARD_ISI_PCK0 { PIO_PA6B_PCK0, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT } | |
| #define BOARD_ISI_RST { 1 << 13, PIOB, ID_PIOB, PIO_OUTPUT_1, PIO_DEFAULT } | |
| #define BOARD_ISI_PWD { 1 << 19, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT } | |
| #define BOARD_ISI_PINS \ | |
| PIN_ISI_D0, PIN_ISI_D1, PIN_ISI_D2,PIN_ISI_D3,PIN_ISI_D4, PIN_ISI_D5,\ | |
| PIN_ISI_D6,PIN_ISI_D7,PIN_ISI_D8, PIN_ISI_D9,BOARD_ISI_VSYNC ,\ | |
| BOARD_ISI_HSYNC ,BOARD_ISI_PCK, BOARD_ISI_RST, BOARD_ISI_PWD,BOARD_ISI_PCK0 | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page samv7_Xplained_ultra_usb "SAM V71 Xplained Ultra - USB device" | |
| * | |
| * \section Definitions | |
| * - \ref BOARD_USB_BMATTRIBUTES | |
| * | |
| * \section vBus | |
| * - \ref PIN_USB_VBUS | |
| * | |
| */ | |
| /** | |
| * USB attributes configuration descriptor (bus or self powered, | |
| * remote wakeup) | |
| */ | |
| #define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP | |
| /** USB VBus monitoring pin definition. */ | |
| #define PIN_USB_VBUS {PIO_PC16, PIOC, ID_PIOC, PIO_INPUT, PIO_DEFAULT} | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page samv7_Xplained_ultra_extcomp "SAM V71 Xplained Ultra - External components" | |
| * This page lists the definitions related to external on-board components | |
| * located in the board.h file for the SAM V71 Xplained Ultra board. | |
| * | |
| * LCD | |
| */ | |
| /** Indicates board has an ILI9325 external component to manage LCD. */ | |
| #define BOARD_LCD_ILI9488 | |
| //#define BOARD_LCD_SPI_EXT1 | |
| #define BOARD_LCD_SPI_EXT2 | |
| /** SPI pin definition for LCD */ | |
| #if defined (BOARD_LCD_SPI_EXT1) | |
| /** SPI MISO pin definition. */ | |
| #define LCD_SPI_MISO {PIO_PD20B_SPI0_MISO, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** SPI MOSI pin definition. */ | |
| #define LCD_SPI_MOSI {PIO_PD21B_SPI0_MOSI, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** SPI SPCK pin definition. */ | |
| #define LCD_SPI_SPCK {PIO_PD22B_SPI0_SPCK, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** SPI chip select pin definition. */ | |
| #define LCD_SPI_NPCS {PIO_PD27B_SPI0_NPCS3, PIOD, ID_PIOD, PIO_PERIPH_B,PIO_DEFAULT} | |
| /** SPI chip select pin definition. */ | |
| #define LCD_SPI_NPCS {PIO_PD25B_SPI0_NPCS1, PIOD, ID_PIOD, PIO_PERIPH_B,PIO_DEFAULT} | |
| /** LCD pins definition. */ | |
| #define BOARD_SPI_LCD_PINS {LCD_SPI_MISO, LCD_SPI_MOSI, LCD_SPI_SPCK, LCD_SPI_NPCS} | |
| /** Back-light pin definition. */ | |
| #define BOARD_SPI_LCD_BACKLIGHT_PIN \ | |
| {PIO_PA0A_PWMC0_PWMH0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| /** PWMC PWM0 pin definition: Output Low. */ | |
| #define LCD_SPI_PIN_RESET {PIO_PD28, PIOD, ID_PIOD, PIO_OUTPUT_1, PIO_DEFAULT} | |
| /** PWM channel for LED0 */ | |
| #define CHANNEL_PWM_LCD 0 | |
| #endif | |
| /*ENDIF BOARD_LCD_SPI_EXT1 */ | |
| #if defined (BOARD_LCD_SPI_EXT2) | |
| /** SPI MISO pin definition. */ | |
| #define LCD_SPI_MISO {PIO_PD20B_SPI0_MISO, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** SPI MOSI pin definition. */ | |
| #define LCD_SPI_MOSI {PIO_PD21B_SPI0_MOSI, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** SPI SPCK pin definition. */ | |
| #define LCD_SPI_SPCK {PIO_PD22B_SPI0_SPCK, PIOD, ID_PIOD, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** SPI chip select pin definition. */ | |
| #define LCD_SPI_NPCS {PIO_PD27B_SPI0_NPCS3, PIOD, ID_PIOD, PIO_PERIPH_B,PIO_DEFAULT} | |
| /** LCD pins definition. */ | |
| #define BOARD_SPI_LCD_PINS {LCD_SPI_MISO, LCD_SPI_MOSI, LCD_SPI_SPCK, LCD_SPI_NPCS} | |
| /** Back-light pin definition. */ | |
| #define BOARD_SPI_LCD_PIN_BACKLIGHT \ | |
| {PIO_PC19B_PWMC0_PWMH2, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} | |
| /** PWMC PWM0 pin definition: Output Low. */ | |
| #define LCD_SPI_PIN_RESET {PIO_PA24, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} | |
| /** LCD command/data select pin */ | |
| #define BOARD_SPI_LCD_PIN_CDS {PIO_PA6, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} | |
| /** PWM channel for LED0 */ | |
| #define CHANNEL_PWM_LCD 2 | |
| #endif | |
| /*ENDIF BOARD_LCD_SPI_EXT2 */ | |
| /** SMC pin definition for LCD */ | |
| /** LCD data pin */ | |
| #define PIN_EBI_LCD_DATAL {0xFF, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} | |
| #define PIN_EBI_LCD_DATAH_0 {0x3F, PIOE, ID_PIOE, PIO_PERIPH_A, PIO_PULLUP} | |
| #define PIN_EBI_LCD_DATAH_1 {PIO_PA15A_D14|PIO_PA16A_D15, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_PULLUP} | |
| /** LCD WE pin */ | |
| #define PIN_EBI_LCD_NWE {PIO_PC8A_NWE, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} | |
| /** LCD RD pin */ | |
| #define PIN_EBI_LCD_NRD {PIO_PC11A_NRD, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_PULLUP} | |
| /* LCD CS pin (NCS3) */ | |
| #define PIN_EBI_LCD_CS {PIO_PD19A_NCS3, PIOD, ID_PIOD, PIO_PERIPH_A, PIO_PULLUP} | |
| /** LCD command/data select pin */ | |
| #define BOARD_EBI_LCD_PIN_CDS {PIO_PC30, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} | |
| /** Back-light pin definition. */ | |
| #define BOARD_EBI_LCD_PIN_BACKLIGHT {PIO_PC9B_TIOB7, PIOC, ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT} | |
| /** LCD reset pin */ | |
| #define LCD_EBI_PIN_RESET {PIO_PC13, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} | |
| /** LCD pins definition. */ | |
| #define BOARD_EBI_LCD_PINS \ | |
| {PIN_EBI_LCD_DATAL, PIN_EBI_LCD_DATAH_0, PIN_EBI_LCD_DATAH_1, \ | |
| PIN_EBI_LCD_NWE,PIN_EBI_LCD_NRD,PIN_EBI_LCD_CS} | |
| /** Display width in pixels. */ | |
| #define BOARD_LCD_WIDTH 320 | |
| /** Display height in pixels. */ | |
| #define BOARD_LCD_HEIGHT 480 | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page samv7_Xplained_ultra_mem "SAM V71 Xplained Ultra - Memories" | |
| * This page lists definitions related to internal & external on-board memories. | |
| * \section SDRAM | |
| * - \ref PIN_SDRAM_D0_7 | |
| * - \ref PIN_SDRAM_D8_13 | |
| * - \ref PIN_SDRAM_D14_15 | |
| * - \ref PIN_SDRAM_A0_9 | |
| * - \ref PIN_SDRAM_SDA10 | |
| * - \ref PIN_SDRAM_CAS | |
| * - \ref PIN_SDRAM_RAS | |
| * - \ref PIN_SDRAM_SDCKE | |
| * - \ref PIN_SDRAM_SDCK | |
| * - \ref PIN_SDRAM_SDSC | |
| * - \ref PIN_SDRAM_NBS0 | |
| * - \ref PIN_SDRAM_NBS1 | |
| * - \ref PIN_SDRAM_SDWE | |
| * - \ref PIN_SDRAM_BA0 | |
| * | |
| * \section SDMMC | |
| * - \ref BOARD_MCI_PIN_CD | |
| * - \ref BOARD_MCI_PIN_CK | |
| * - \ref BOARD_MCI_PINS_SLOTA | |
| * - \ref BOARD_SD_PINS | |
| * | |
| * \section QSPI | |
| * - \ref PINS_QSPI_IO | |
| * - \ref PINS_QSPI_IO3 | |
| * - \ref PINS_QSPI | |
| */ | |
| /** List of all SDRAM pin definitions. */ | |
| #define BOARD_SDRAM_SIZE (2*1024*1024) | |
| #define PIN_SDRAM_D0_7 {0x000000FF, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_DEFAULT} | |
| #define PIN_SDRAM_D8_13 {0x0000003F, PIOE, ID_PIOE, PIO_PERIPH_A, PIO_DEFAULT} | |
| #define PIN_SDRAM_D14_15 {0x00018000, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| #define PIN_SDRAM_A0_9 {0x3FF00000, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_DEFAULT} | |
| #define PIN_SDRAM_SDA10 {0x00002000, PIOD, ID_PIOD, PIO_PERIPH_C, PIO_DEFAULT} | |
| #define PIN_SDRAM_CAS {0x00020000, PIOD, ID_PIOD, PIO_PERIPH_C, PIO_DEFAULT} | |
| #define PIN_SDRAM_RAS {0x00010000, PIOD, ID_PIOD, PIO_PERIPH_C, PIO_DEFAULT} | |
| #define PIN_SDRAM_SDCKE {0x00004000, PIOD, ID_PIOD, PIO_PERIPH_C, PIO_DEFAULT} | |
| #define PIN_SDRAM_SDCK {0x00800000, PIOD, ID_PIOD, PIO_PERIPH_C, PIO_DEFAULT} | |
| #define PIN_SDRAM_SDSC {0x00008000, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_DEFAULT} | |
| #define PIN_SDRAM_NBS0 {0x00040000, PIOC, ID_PIOC, PIO_PERIPH_A, PIO_DEFAULT} | |
| #define PIN_SDRAM_NBS1 {0x00008000, PIOD, ID_PIOD, PIO_PERIPH_C, PIO_DEFAULT} | |
| #define PIN_SDRAM_SDWE {0x20000000, PIOD, ID_PIOD, PIO_PERIPH_C, PIO_DEFAULT} | |
| #define PIN_SDRAM_BA0 {0x00100000, PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT} | |
| #define BOARD_SDRAM_PINS PIN_SDRAM_D0_7, PIN_SDRAM_D8_13 , PIN_SDRAM_D14_15,\ | |
| PIN_SDRAM_A0_9, PIN_SDRAM_SDA10, PIN_SDRAM_BA0, \ | |
| PIN_SDRAM_CAS, PIN_SDRAM_RAS, PIN_SDRAM_SDCKE,PIN_SDRAM_SDCK,\ | |
| PIN_SDRAM_SDSC,PIN_SDRAM_NBS0 ,PIN_SDRAM_NBS1,PIN_SDRAM_SDWE | |
| /** List of all MCI pin definitions. */ | |
| /** MCI0 Card detect pin definition. (PE5) */ | |
| #define BOARD_MCI_PIN_CD {PIO_PD18, PIOD, ID_PIOD, PIO_INPUT, PIO_PULLUP} | |
| /** MCI0 Clock . */ | |
| #define BOARD_MCI_PIN_CK {PIO_PA25D_MCCK, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT} | |
| /** MCI0 Solt A IO pins definition. (PC4-PC13) */ | |
| #define BOARD_MCI_PINS_SLOTA \ | |
| {(PIO_PA30C_MCDA0 | PIO_PA31C_MCDA1 | PIO_PA26C_MCDA2 | PIO_PA27C_MCDA3 | PIO_PA28C_MCCDA),\ | |
| PIOA, ID_PIOA, PIO_PERIPH_C, PIO_DEFAULT} | |
| /** MCI pins that shall be configured to access the SD card. */ | |
| #define BOARD_SD_PINS {BOARD_MCI_PINS_SLOTA, BOARD_MCI_PIN_CK} | |
| /** MCI Card Detect pin. */ | |
| #define BOARD_SD_PIN_CD BOARD_MCI_PIN_CD | |
| /** Total number of MCI interface */ | |
| #define BOARD_NUM_MCI 1 | |
| /** List of all SQPI pin definitions. */ | |
| #define PINS_QSPI_IO \ | |
| {(PIO_PA11A_QCS | PIO_PA13A_QIO0 | PIO_PA12A_QIO1 | PIO_PA17A_QIO2 | PIO_PA14A_QSCK),\ | |
| PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} | |
| #define PINS_QSPI_IO3 {PIO_PD31A_QIO3, PIOD, ID_PIOD, PIO_PERIPH_A, PIO_DEFAULT} | |
| #define PINS_QSPI {PINS_QSPI_IO, PINS_QSPI_IO3} | |
| /*----------------------------------------------------------------------------*/ | |
| /** | |
| * \page samv7_Xplained_ultra_chipdef "SAM V71 Xplained Ultra - Individual chip definition" | |
| * This page lists the definitions related to different chip's definition | |
| * | |
| * \section USART | |
| * - \ref BOARD_PIN_USART_RXD | |
| * - \ref BOARD_PIN_USART_TXD | |
| * - \ref BOARD_PIN_USART_CTS | |
| * - \ref BOARD_PIN_USART_RTS | |
| * - \ref BOARD_PIN_USART_EN | |
| * - \ref BOARD_USART_BASE | |
| * - \ref BOARD_ID_USART | |
| */ | |
| /** Rtc */ | |
| #define BOARD_RTC_ID ID_RTC | |
| /** TWI ID for QTouch application to use */ | |
| #define BOARD_ID_TWI_AT42 ID_TWI0 | |
| /** TWI Base for QTouch application to use */ | |
| #define BOARD_BASE_TWI_AT42 TWI0 | |
| /** TWI pins for QTouch application to use */ | |
| #define BOARD_PINS_TWI_AT42 PINS_TWI0 | |
| /** USART RX pin for application */ | |
| #define BOARD_PIN_USART_RXD PIN_USART1_RXD | |
| /** USART TX pin for application */ | |
| #define BOARD_PIN_USART_TXD PIN_USART1_TXD | |
| /** USART CTS pin for application */ | |
| #define BOARD_PIN_USART_CTS PIN_USART1_CTS | |
| /** USART RTS pin for application */ | |
| #define BOARD_PIN_USART_RTS PIN_USART1_RTS | |
| /** USART ENABLE pin for application */ | |
| #define BOARD_PIN_USART_EN PIN_USART1_EN | |
| /** USART Base for application */ | |
| #define BOARD_USART_BASE USART1 | |
| /** USART ID for application */ | |
| #define BOARD_ID_USART ID_USART1 | |
| /*----------------------------------------------------------------------------*/ | |
| /* | |
| * USB pins | |
| */ | |
| #define PINS_VBUS_EN {PIO_PC16, PIOC, ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT} | |
| #endif /* #ifndef _BOARD_H_ */ | |