| /* File: startup_ARMCM4.S |
| * Purpose: startup file for Cortex-M4 devices. Should use with |
| * GCC for ARM Embedded Processors |
| * Version: V2.0 |
| * Date: 16 August 2013 |
| * |
| /* Copyright (c) 2011 - 2013 ARM LIMITED |
| |
| All rights reserved. |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions are met: |
| - Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| - Redistributions in binary form must reproduce the above copyright |
| notice, this list of conditions and the following disclaimer in the |
| documentation and/or other materials provided with the distribution. |
| - Neither the name of ARM nor the names of its contributors may be used |
| to endorse or promote products derived from this software without |
| specific prior written permission. |
| * |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE |
| LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| POSSIBILITY OF SUCH DAMAGE. |
| ---------------------------------------------------------------------------*/ |
| .syntax unified |
| .arch armv7e-m |
| |
| .extern __SRAM_segment_end__ |
| |
| .section .isr_vector |
| .align 4 |
| .globl __isr_vector |
| __isr_vector: |
| .long __SRAM_segment_end__ - 4 /* Top of Stack at top of RAM*/ |
| .long Reset_Handler /* Reset Handler */ |
| .long NMI_Handler /* NMI Handler */ |
| .long HardFault_Handler /* Hard Fault Handler */ |
| .long MemManage_Handler /* MPU Fault Handler */ |
| .long BusFault_Handler /* Bus Fault Handler */ |
| .long UsageFault_Handler /* Usage Fault Handler */ |
| .long 0 /* Reserved */ |
| .long 0 /* Reserved */ |
| .long 0 /* Reserved */ |
| .long 0 /* Reserved */ |
| .long SVC_Handler /* SVCall Handler */ |
| .long DebugMon_Handler /* Debug Monitor Handler */ |
| .long 0 /* Reserved */ |
| .long PendSV_Handler /* PendSV Handler */ |
| .long SysTick_Handler /* SysTick Handler */ |
| |
| /* External interrupts */ |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| .long DummyHandler |
| |
| |
| .text |
| .thumb |
| .thumb_func |
| .align 2 |
| .globl _start |
| .extern main |
| .globl Reset_Handler |
| .type Reset_Handler, %function |
| _start: |
| Reset_Handler: |
| /* Firstly it copies data from read only memory to RAM. There are two schemes |
| * to copy. One can copy more than one sections. Another can only copy |
| * one section. The former scheme needs more instructions and read-only |
| * data to implement than the latter. |
| * Macro __STARTUP_COPY_MULTIPLE is used to choose between two schemes. */ |
| |
| /* Single section scheme. |
| * |
| * The ranges of copy from/to are specified by following symbols |
| * __etext: LMA of start of the section to copy from. Usually end of text |
| * __data_start__: VMA of start of the section to copy to |
| * __data_end__: VMA of end of the section to copy to |
| * |
| * All addresses must be aligned to 4 bytes boundary. |
| */ |
| ldr r1, =__etext |
| ldr r2, =__data_start__ |
| ldr r3, =__data_end__ |
| |
| .L_loop1: |
| cmp r2, r3 |
| ittt lt |
| ldrlt r0, [r1], #4 |
| strlt r0, [r2], #4 |
| blt .L_loop1 |
| |
| /* This part of work usually is done in C library startup code. Otherwise, |
| * define this macro to enable it in this startup. |
| * |
| * There are two schemes too. One can clear multiple BSS sections. Another |
| * can only clear one section. The former is more size expensive than the |
| * latter. |
| * |
| * Define macro __STARTUP_CLEAR_BSS_MULTIPLE to choose the former. |
| * Otherwise efine macro __STARTUP_CLEAR_BSS to choose the later. |
| */ |
| |
| /* Single BSS section scheme. |
| * |
| * The BSS section is specified by following symbols |
| * __bss_start__: start of the BSS section. |
| * __bss_end__: end of the BSS section. |
| * |
| * Both addresses must be aligned to 4 bytes boundary. |
| */ |
| ldr r1, =__bss_start__ |
| ldr r2, =__bss_end__ |
| |
| movs r0, 0 |
| .L_loop3: |
| cmp r1, r2 |
| itt lt |
| strlt r0, [r1], #4 |
| blt .L_loop3 |
| |
| #ifndef __NO_SYSTEM_INIT |
| /* bl SystemInit */ |
| #endif |
| |
| bl main |
| |
| .pool |
| .size Reset_Handler, . - Reset_Handler |
| |
| .align 1 |
| .thumb_func |
| .weak Default_Handler |
| .type Default_Handler, %function |
| Default_Handler: |
| b . |
| .size Default_Handler, . - Default_Handler |
| |
| /* Macro to define default handlers. Default handler |
| * will be weak symbol and just dead loops. They can be |
| * overwritten by other handlers */ |
| .macro def_irq_handler handler_name |
| .weak \handler_name |
| .set \handler_name, Default_Handler |
| .endm |
| |
| def_irq_handler NMI_Handler |
| def_irq_handler HardFault_Handler |
| def_irq_handler MemManage_Handler |
| def_irq_handler BusFault_Handler |
| def_irq_handler UsageFault_Handler |
| def_irq_handler SVC_Handler |
| def_irq_handler DebugMon_Handler |
| def_irq_handler PendSV_Handler |
| def_irq_handler SysTick_Handler |
| def_irq_handler DEF_IRQHandler |
| def_irq_handler DummyHandler |
| |
| |
| .end |