/* | |
* FreeRTOS Kernel V10.3.0 | |
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. | |
* | |
* Permission is hereby granted, free of charge, to any person obtaining a copy of | |
* this software and associated documentation files (the "Software"), to deal in | |
* the Software without restriction, including without limitation the rights to | |
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of | |
* the Software, and to permit persons to whom the Software is furnished to do so, | |
* subject to the following conditions: | |
* | |
* The above copyright notice and this permission notice shall be included in all | |
* copies or substantial portions of the Software. | |
* | |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS | |
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR | |
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
* | |
* http://www.FreeRTOS.org | |
* http://aws.amazon.com/freertos | |
* | |
* 1 tab == 4 spaces! | |
*/ | |
#ifndef FREERTOS_CONFIG_H | |
#define FREERTOS_CONFIG_H | |
/*----------------------------------------------------------- | |
* Application specific definitions. | |
* | |
* These definitions should be adjusted for your particular hardware and | |
* application requirements. | |
* | |
* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE | |
* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. | |
* | |
* See http://www.freertos.org/a00110.html | |
*----------------------------------------------------------*/ | |
/* | |
* The FreeRTOS Quark port implements a full interrupt nesting model. | |
* | |
* Interrupts that are assigned a priority at or below | |
* configMAX_API_CALL_INTERRUPT_PRIORITY can call interrupt safe API functions | |
* and will nest. | |
* | |
* Interrupts that are assigned a priority above | |
* configMAX_API_CALL_INTERRUPT_PRIORITY cannot call any FreeRTOS API functions, | |
* will nest, and will not be masked by FreeRTOS critical sections (although all | |
* interrupts are briefly masked by the hardware itself on interrupt entry). | |
* | |
* FreeRTOS functions that can be called from an interrupt are those that end in | |
* "FromISR". FreeRTOS maintains a separate interrupt safe API to enable | |
* interrupt entry to be shorter, faster, simpler and smaller. | |
* | |
* User definable interrupt priorities range from 2 (the lowest) to 15 (the | |
* highest). | |
*/ | |
#define configMAX_API_CALL_INTERRUPT_PRIORITY 10 | |
/* | |
* Interrupt entry code will switch the stack in use to a dedicated system | |
* stack. | |
* | |
* configISR_STACK_SIZE defines the number of 32-bit values that can be stored | |
* on the system stack, and must be large enough to hold a potentially nested | |
* interrupt stack frame. | |
* | |
* Changing this parameter necessitates a complete rebuild so the assembly files | |
* also get rebuilt. | |
*/ | |
#define configISR_STACK_SIZE 350 | |
/* | |
* If configSUPPORT_FPU is set to 1 then tasks can optionally have a floating | |
* point context (the floating point registers will be saved as part of the task | |
* context). If configSUPPORT_FPU is set to 1 then a task must *not* use any | |
* floating point instructions until after it has called vPortTaskUsesFPU(). | |
* | |
* If configSUPPORT_FPU is set to 0 then floating point instructions must never | |
* be used. | |
*/ | |
#define configSUPPORT_FPU 1 | |
/* There are two ways of implementing interrupt handlers: | |
* | |
* 1) As standard C functions - | |
* | |
* This method can only be used if configUSE_COMMON_INTERRUPT_ENTRY_POINT | |
* is set to 1. The C function is installed using | |
* xPortRegisterCInterruptHandler(). | |
* | |
* This is the simplest of the two methods but incurs a slightly longer | |
* interrupt entry time. | |
* | |
* 2) By using an assembly stub that wraps the handler in the FreeRTOS | |
* portFREERTOS_INTERRUPT_ENTRY and portFREERTOS_INTERRUPT_EXIT macros. The handler is installed | |
* using xPortInstallInterruptHandler(). | |
* | |
* This method can always be used. It is slightly more complex than | |
* method 1 but benefits from a faster interrupt entry time. | |
* | |
* Changing this parameter necessitates a complete clean build. | |
*/ | |
#define configUSE_COMMON_INTERRUPT_ENTRY_POINT 1 | |
#define configCPU_CLOCK_HZ ( 400000000UL ) | |
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 | |
#define configMINIMAL_STACK_SIZE ( 125 ) | |
#define configUSE_TICKLESS_IDLE 0 | |
#define configTICK_RATE_HZ ( ( TickType_t ) 1000 ) | |
#define configUSE_PREEMPTION 1 | |
#define configUSE_IDLE_HOOK 1 | |
#define configUSE_TICK_HOOK 1 | |
#define configMAX_PRIORITIES ( 7 ) | |
#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 55 * 1024 ) ) | |
#define configMAX_TASK_NAME_LEN ( 10 ) | |
#define configUSE_TRACE_FACILITY 0 | |
#define configUSE_16_BIT_TICKS 0 | |
#define configIDLE_SHOULD_YIELD 1 | |
#define configUSE_MUTEXES 1 | |
#define configQUEUE_REGISTRY_SIZE 8 | |
#define configCHECK_FOR_STACK_OVERFLOW 2 | |
#define configUSE_RECURSIVE_MUTEXES 1 | |
#define configUSE_MALLOC_FAILED_HOOK 1 | |
#define configUSE_APPLICATION_TASK_TAG 0 | |
#define configUSE_COUNTING_SEMAPHORES 1 | |
#define configUSE_QUEUE_SETS 1 | |
#define configUSE_TASK_NOTIFICATIONS 1 | |
/* Co-routine definitions. */ | |
#define configUSE_CO_ROUTINES 0 | |
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) | |
/* Software timer definitions. */ | |
#define configUSE_TIMERS 1 | |
#define configTIMER_TASK_PRIORITY ( configMAX_PRIORITIES - 1 ) | |
#define configTIMER_QUEUE_LENGTH 8 | |
#define configTIMER_TASK_STACK_DEPTH ( configMINIMAL_STACK_SIZE * 2 ) | |
/* Set the following definitions to 1 to include the API function, or zero | |
to exclude the API function. */ | |
#define INCLUDE_vTaskPrioritySet 1 | |
#define INCLUDE_uxTaskPriorityGet 1 | |
#define INCLUDE_vTaskDelete 1 | |
#define INCLUDE_vTaskCleanUpResources 1 | |
#define INCLUDE_vTaskSuspend 1 | |
#define INCLUDE_vTaskDelayUntil 1 | |
#define INCLUDE_vTaskDelay 1 | |
#define INCLUDE_xTimerPendFunctionCall 1 | |
#define INCLUDE_eTaskGetState 1 | |
/* This demo makes use of one or more example stats formatting functions. These | |
format the raw data provided by the uxTaskGetSystemState() function in to human | |
readable ASCII form. See the notes in the implementation of vTaskList() within | |
FreeRTOS/Source/tasks.c for limitations. */ | |
#define configUSE_STATS_FORMATTING_FUNCTIONS 1 | |
/* portCONFIGURE_TIMER_FOR_RUN_TIME_STATS is not required because the time base | |
comes from the ulHighFrequencyTimerCounts variable which is incremented in a | |
high frequency timer that is already being started as part of the interrupt | |
nesting test. */ | |
#define configGENERATE_RUN_TIME_STATS 0 | |
/* The size of the global output buffer that is available for use when there | |
are multiple command interpreters running at once (for example, one on a UART | |
and one on TCP/IP). This is done to prevent an output buffer being defined by | |
each implementation - which would waste RAM. In this case, there is only one | |
command interpreter running. */ | |
#define configCOMMAND_INT_MAX_OUTPUT_SIZE 2096 | |
/* This file is included from assembler files - make sure C code is not included | |
in assembler files. */ | |
#ifndef __ASSEMBLER__ | |
void vAssertCalled( const char * pcFile, unsigned long ulLine ); | |
void vConfigureTickInterrupt( void ); | |
void vClearTickInterrupt( void ); | |
#endif /* __ASSEMBLER__ */ | |
/* Normal assert() semantics without relying on the provision of an assert.h | |
header file. */ | |
#define configASSERT( x ) if( ( x ) == 0 ) vAssertCalled( __FILE__, __LINE__ ); | |
/****** Hardware/compiler specific settings. *******************************************/ | |
/* | |
* The application must provide a function that configures a peripheral to | |
* create the FreeRTOS tick interrupt, then define configSETUP_TICK_INTERRUPT() | |
* in FreeRTOSConfig.h to call the function. This file contains a function | |
* that is suitable for use on the Zynq MPU. FreeRTOS_Tick_Handler() must | |
* be installed as the peripheral's interrupt handler. | |
*/ | |
#define configSETUP_TICK_INTERRUPT() vConfigureTickInterrupt() | |
#define configCLEAR_TICK_INTERRUPT() vClearTickInterrupt() | |
/* Compiler specifics. */ | |
#define fabs( x ) __builtin_fabs( ( x ) ) | |
#endif /* FREERTOS_CONFIG_H */ | |