/* | |
FreeRTOS V6.0.1 - Copyright (C) 2009 Real Time Engineers Ltd. | |
*************************************************************************** | |
* * | |
* If you are: * | |
* * | |
* + New to FreeRTOS, * | |
* + Wanting to learn FreeRTOS or multitasking in general quickly * | |
* + Looking for basic training, * | |
* + Wanting to improve your FreeRTOS skills and productivity * | |
* * | |
* then take a look at the FreeRTOS eBook * | |
* * | |
* "Using the FreeRTOS Real Time Kernel - a Practical Guide" * | |
* http://www.FreeRTOS.org/Documentation * | |
* * | |
* A pdf reference manual is also available. Both are usually delivered * | |
* to your inbox within 20 minutes to two hours when purchased between 8am * | |
* and 8pm GMT (although please allow up to 24 hours in case of * | |
* exceptional circumstances). Thank you for your support! * | |
* * | |
*************************************************************************** | |
This file is part of the FreeRTOS distribution. | |
FreeRTOS is free software; you can redistribute it and/or modify it under | |
the terms of the GNU General Public License (version 2) as published by the | |
Free Software Foundation AND MODIFIED BY the FreeRTOS exception. | |
***NOTE*** The exception to the GPL is included to allow you to distribute | |
a combined work that includes FreeRTOS without being obliged to provide the | |
source code for proprietary components outside of the FreeRTOS kernel. | |
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT | |
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
more details. You should have received a copy of the GNU General Public | |
License and the FreeRTOS license exception along with FreeRTOS; if not it | |
can be viewed here: http://www.freertos.org/a00114.html and also obtained | |
by writing to Richard Barry, contact details for whom are available on the | |
FreeRTOS WEB site. | |
1 tab == 4 spaces! | |
http://www.FreeRTOS.org - Documentation, latest information, license and | |
contact details. | |
http://www.SafeRTOS.com - A version that is certified for use in safety | |
critical systems. | |
http://www.OpenRTOS.com - Commercial support, development, porting, | |
licensing and training services. | |
*/ | |
/* | |
BASIC INTERRUPT DRIVEN SERIAL PORT DRIVER FOR USART0. | |
This file contains all the serial port components that must be compiled | |
to ARM mode. The components that can be compiled to either ARM or THUMB | |
mode are contained in serial.c. | |
*/ | |
/* Standard includes. */ | |
#include <stdlib.h> | |
/* Scheduler includes. */ | |
#include "FreeRTOS.h" | |
#include "queue.h" | |
#include "task.h" | |
/* Demo application includes. */ | |
#include "serial.h" | |
#include "AT91R40008.h" | |
#include "usart.h" | |
/*-----------------------------------------------------------*/ | |
/* Constant to access the AIC. */ | |
#define serCLEAR_AIC_INTERRUPT ( ( unsigned long ) 0 ) | |
/* Constants to determine the ISR source. */ | |
#define serSOURCE_THRE ( ( unsigned char ) 0x02 ) | |
#define serSOURCE_RX_TIMEOUT ( ( unsigned char ) 0x0c ) | |
#define serSOURCE_ERROR ( ( unsigned char ) 0x06 ) | |
#define serSOURCE_RX ( ( unsigned char ) 0x04 ) | |
#define serINTERRUPT_SOURCE_MASK ( ( unsigned long ) (US_RXRDY | US_TXRDY | US_RXBRK | US_OVRE | US_FRAME | US_PARE) ) | |
/* Queues used to hold received characters, and characters waiting to be | |
transmitted. */ | |
static xQueueHandle xRxedChars; | |
static xQueueHandle xCharsForTx; | |
/*-----------------------------------------------------------*/ | |
/* UART0 interrupt service routine. This can cause a context switch so MUST | |
be declared "naked". */ | |
void vUART_ISR_Wrapper( void ) __attribute__ ((naked)); | |
/* The ISR function that actually performs the work. This must be separate | |
from the wrapper to ensure the correct stack frame is set up. */ | |
void vUART_ISR_Handler( void ) __attribute__ ((noinline)); | |
/*-----------------------------------------------------------*/ | |
void vSerialISRCreateQueues( unsigned portBASE_TYPE uxQueueLength, xQueueHandle *pxRxedChars, xQueueHandle *pxCharsForTx ) | |
{ | |
/* Create the queues used to hold Rx and Tx characters. */ | |
xRxedChars = xQueueCreate( uxQueueLength, ( unsigned portBASE_TYPE ) sizeof( signed char ) ); | |
xCharsForTx = xQueueCreate( uxQueueLength + 1, ( unsigned portBASE_TYPE ) sizeof( signed char ) ); | |
/* Pass back a reference to the queues so the serial API file can | |
post/receive characters. */ | |
*pxRxedChars = xRxedChars; | |
*pxCharsForTx = xCharsForTx; | |
} | |
/*-----------------------------------------------------------*/ | |
void vUART_ISR_Wrapper( void ) | |
{ | |
/* Save the context of the interrupted task. */ | |
portSAVE_CONTEXT(); | |
/* Call the handler. This must be a separate function to ensure the | |
stack frame is correctly set up. */ | |
__asm volatile( "bl vUART_ISR_Handler" ); | |
/* Restore the context of whichever task will run next. */ | |
portRESTORE_CONTEXT(); | |
} | |
/*-----------------------------------------------------------*/ | |
void vUART_ISR_Handler( void ) | |
{ | |
/* Now we can declare the local variables. These must be static. */ | |
signed char cChar; | |
portBASE_TYPE xHigherPriorityTaskWoken = pdFALSE; | |
unsigned long ulStatus; | |
/* What caused the interrupt? */ | |
ulStatus = AT91C_BASE_US0->US_CSR & AT91C_BASE_US0->US_IMR; | |
if (ulStatus & US_TXRDY) | |
{ | |
/* The interrupt was caused by the THR becoming empty. Are there any | |
more characters to transmit? */ | |
if( xQueueReceiveFromISR( xCharsForTx, &cChar, &xHigherPriorityTaskWoken ) == pdTRUE ) | |
{ | |
/* A character was retrieved from the queue so can be sent to the | |
THR now. */ | |
AT91C_BASE_US0->US_THR = cChar; | |
} | |
else | |
{ | |
/* Queue empty, nothing to send so turn off the Tx interrupt. */ | |
AT91C_BASE_US0->US_IDR = US_TXRDY; | |
} | |
} | |
if (ulStatus & US_RXRDY) | |
{ | |
/* The interrupt was caused by the receiver getting data. */ | |
cChar = AT91C_BASE_US0->US_RHR; | |
xQueueSendFromISR(xRxedChars, &cChar, &xHigherPriorityTaskWoken); | |
} | |
/* Acknowledge the interrupt at AIC level... */ | |
AT91C_BASE_AIC->AIC_EOICR = serCLEAR_AIC_INTERRUPT; | |
/* If an event caused a task to unblock then we call "Yield from ISR" to | |
ensure that the unblocked task is the task that executes when the interrupt | |
completes if the unblocked task has a priority higher than the interrupted | |
task. */ | |
if( xHigherPriorityTaskWoken ) | |
{ | |
portYIELD_FROM_ISR(); | |
} | |
} | |
/*-----------------------------------------------------------*/ | |