/* | |
* FreeRTOS Kernel V10.4.3 | |
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. | |
* | |
* Permission is hereby granted, free of charge, to any person obtaining a copy of | |
* this software and associated documentation files (the "Software"), to deal in | |
* the Software without restriction, including without limitation the rights to | |
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of | |
* the Software, and to permit persons to whom the Software is furnished to do so, | |
* subject to the following conditions: | |
* | |
* The above copyright notice and this permission notice shall be included in all | |
* copies or substantial portions of the Software. | |
* | |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS | |
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR | |
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER | |
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | |
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | |
* | |
* https://www.FreeRTOS.org | |
* https://github.com/FreeRTOS | |
* | |
*/ | |
/* | |
* Stream buffers are used to send a continuous stream of data from one task or | |
* interrupt to another. Their implementation is light weight, making them | |
* particularly suited for interrupt to task and core to core communication | |
* scenarios. | |
* | |
* ***NOTE***: Uniquely among FreeRTOS objects, the stream buffer | |
* implementation (so also the message buffer implementation, as message buffers | |
* are built on top of stream buffers) assumes there is only one task or | |
* interrupt that will write to the buffer (the writer), and only one task or | |
* interrupt that will read from the buffer (the reader). It is safe for the | |
* writer and reader to be different tasks or interrupts, but, unlike other | |
* FreeRTOS objects, it is not safe to have multiple different writers or | |
* multiple different readers. If there are to be multiple different writers | |
* then the application writer must place each call to a writing API function | |
* (such as xStreamBufferSend()) inside a critical section and set the send | |
* block time to 0. Likewise, if there are to be multiple different readers | |
* then the application writer must place each call to a reading API function | |
* (such as xStreamBufferReceive()) inside a critical section section and set the | |
* receive block time to 0. | |
* | |
*/ | |
#ifndef STREAM_BUFFER_H | |
#define STREAM_BUFFER_H | |
#ifndef INC_FREERTOS_H | |
#error "include FreeRTOS.h must appear in source files before include stream_buffer.h" | |
#endif | |
/* *INDENT-OFF* */ | |
#if defined( __cplusplus ) | |
extern "C" { | |
#endif | |
/* *INDENT-ON* */ | |
/** | |
* Type by which stream buffers are referenced. For example, a call to | |
* xStreamBufferCreate() returns an StreamBufferHandle_t variable that can | |
* then be used as a parameter to xStreamBufferSend(), xStreamBufferReceive(), | |
* etc. | |
*/ | |
struct StreamBufferDef_t; | |
typedef struct StreamBufferDef_t * StreamBufferHandle_t; | |
/** | |
* message_buffer.h | |
* | |
* <pre> | |
* StreamBufferHandle_t xStreamBufferCreate( size_t xBufferSizeBytes, size_t xTriggerLevelBytes ); | |
* </pre> | |
* | |
* Creates a new stream buffer using dynamically allocated memory. See | |
* xStreamBufferCreateStatic() for a version that uses statically allocated | |
* memory (memory that is allocated at compile time). | |
* | |
* configSUPPORT_DYNAMIC_ALLOCATION must be set to 1 or left undefined in | |
* FreeRTOSConfig.h for xStreamBufferCreate() to be available. | |
* | |
* @param xBufferSizeBytes The total number of bytes the stream buffer will be | |
* able to hold at any one time. | |
* | |
* @param xTriggerLevelBytes The number of bytes that must be in the stream | |
* buffer before a task that is blocked on the stream buffer to wait for data is | |
* moved out of the blocked state. For example, if a task is blocked on a read | |
* of an empty stream buffer that has a trigger level of 1 then the task will be | |
* unblocked when a single byte is written to the buffer or the task's block | |
* time expires. As another example, if a task is blocked on a read of an empty | |
* stream buffer that has a trigger level of 10 then the task will not be | |
* unblocked until the stream buffer contains at least 10 bytes or the task's | |
* block time expires. If a reading task's block time expires before the | |
* trigger level is reached then the task will still receive however many bytes | |
* are actually available. Setting a trigger level of 0 will result in a | |
* trigger level of 1 being used. It is not valid to specify a trigger level | |
* that is greater than the buffer size. | |
* | |
* @return If NULL is returned, then the stream buffer cannot be created | |
* because there is insufficient heap memory available for FreeRTOS to allocate | |
* the stream buffer data structures and storage area. A non-NULL value being | |
* returned indicates that the stream buffer has been created successfully - | |
* the returned value should be stored as the handle to the created stream | |
* buffer. | |
* | |
* Example use: | |
* <pre> | |
* | |
* void vAFunction( void ) | |
* { | |
* StreamBufferHandle_t xStreamBuffer; | |
* const size_t xStreamBufferSizeBytes = 100, xTriggerLevel = 10; | |
* | |
* // Create a stream buffer that can hold 100 bytes. The memory used to hold | |
* // both the stream buffer structure and the data in the stream buffer is | |
* // allocated dynamically. | |
* xStreamBuffer = xStreamBufferCreate( xStreamBufferSizeBytes, xTriggerLevel ); | |
* | |
* if( xStreamBuffer == NULL ) | |
* { | |
* // There was not enough heap memory space available to create the | |
* // stream buffer. | |
* } | |
* else | |
* { | |
* // The stream buffer was created successfully and can now be used. | |
* } | |
* } | |
* </pre> | |
* \defgroup xStreamBufferCreate xStreamBufferCreate | |
* \ingroup StreamBufferManagement | |
*/ | |
#define xStreamBufferCreate( xBufferSizeBytes, xTriggerLevelBytes ) xStreamBufferGenericCreate( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE ) | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* StreamBufferHandle_t xStreamBufferCreateStatic( size_t xBufferSizeBytes, | |
* size_t xTriggerLevelBytes, | |
* uint8_t *pucStreamBufferStorageArea, | |
* StaticStreamBuffer_t *pxStaticStreamBuffer ); | |
* </pre> | |
* Creates a new stream buffer using statically allocated memory. See | |
* xStreamBufferCreate() for a version that uses dynamically allocated memory. | |
* | |
* configSUPPORT_STATIC_ALLOCATION must be set to 1 in FreeRTOSConfig.h for | |
* xStreamBufferCreateStatic() to be available. | |
* | |
* @param xBufferSizeBytes The size, in bytes, of the buffer pointed to by the | |
* pucStreamBufferStorageArea parameter. | |
* | |
* @param xTriggerLevelBytes The number of bytes that must be in the stream | |
* buffer before a task that is blocked on the stream buffer to wait for data is | |
* moved out of the blocked state. For example, if a task is blocked on a read | |
* of an empty stream buffer that has a trigger level of 1 then the task will be | |
* unblocked when a single byte is written to the buffer or the task's block | |
* time expires. As another example, if a task is blocked on a read of an empty | |
* stream buffer that has a trigger level of 10 then the task will not be | |
* unblocked until the stream buffer contains at least 10 bytes or the task's | |
* block time expires. If a reading task's block time expires before the | |
* trigger level is reached then the task will still receive however many bytes | |
* are actually available. Setting a trigger level of 0 will result in a | |
* trigger level of 1 being used. It is not valid to specify a trigger level | |
* that is greater than the buffer size. | |
* | |
* @param pucStreamBufferStorageArea Must point to a uint8_t array that is at | |
* least xBufferSizeBytes + 1 big. This is the array to which streams are | |
* copied when they are written to the stream buffer. | |
* | |
* @param pxStaticStreamBuffer Must point to a variable of type | |
* StaticStreamBuffer_t, which will be used to hold the stream buffer's data | |
* structure. | |
* | |
* @return If the stream buffer is created successfully then a handle to the | |
* created stream buffer is returned. If either pucStreamBufferStorageArea or | |
* pxStaticstreamBuffer are NULL then NULL is returned. | |
* | |
* Example use: | |
* <pre> | |
* | |
* // Used to dimension the array used to hold the streams. The available space | |
* // will actually be one less than this, so 999. | |
#define STORAGE_SIZE_BYTES 1000 | |
* | |
* // Defines the memory that will actually hold the streams within the stream | |
* // buffer. | |
* static uint8_t ucStorageBuffer[ STORAGE_SIZE_BYTES ]; | |
* | |
* // The variable used to hold the stream buffer structure. | |
* StaticStreamBuffer_t xStreamBufferStruct; | |
* | |
* void MyFunction( void ) | |
* { | |
* StreamBufferHandle_t xStreamBuffer; | |
* const size_t xTriggerLevel = 1; | |
* | |
* xStreamBuffer = xStreamBufferCreateStatic( sizeof( ucBufferStorage ), | |
* xTriggerLevel, | |
* ucBufferStorage, | |
* &xStreamBufferStruct ); | |
* | |
* // As neither the pucStreamBufferStorageArea or pxStaticStreamBuffer | |
* // parameters were NULL, xStreamBuffer will not be NULL, and can be used to | |
* // reference the created stream buffer in other stream buffer API calls. | |
* | |
* // Other code that uses the stream buffer can go here. | |
* } | |
* | |
* </pre> | |
* \defgroup xStreamBufferCreateStatic xStreamBufferCreateStatic | |
* \ingroup StreamBufferManagement | |
*/ | |
#define xStreamBufferCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pucStreamBufferStorageArea, pxStaticStreamBuffer ) \ | |
xStreamBufferGenericCreateStatic( xBufferSizeBytes, xTriggerLevelBytes, pdFALSE, pucStreamBufferStorageArea, pxStaticStreamBuffer ) | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* size_t xStreamBufferSend( StreamBufferHandle_t xStreamBuffer, | |
* const void *pvTxData, | |
* size_t xDataLengthBytes, | |
* TickType_t xTicksToWait ); | |
* </pre> | |
* | |
* Sends bytes to a stream buffer. The bytes are copied into the stream buffer. | |
* | |
* ***NOTE***: Uniquely among FreeRTOS objects, the stream buffer | |
* implementation (so also the message buffer implementation, as message buffers | |
* are built on top of stream buffers) assumes there is only one task or | |
* interrupt that will write to the buffer (the writer), and only one task or | |
* interrupt that will read from the buffer (the reader). It is safe for the | |
* writer and reader to be different tasks or interrupts, but, unlike other | |
* FreeRTOS objects, it is not safe to have multiple different writers or | |
* multiple different readers. If there are to be multiple different writers | |
* then the application writer must place each call to a writing API function | |
* (such as xStreamBufferSend()) inside a critical section and set the send | |
* block time to 0. Likewise, if there are to be multiple different readers | |
* then the application writer must place each call to a reading API function | |
* (such as xStreamBufferReceive()) inside a critical section and set the receive | |
* block time to 0. | |
* | |
* Use xStreamBufferSend() to write to a stream buffer from a task. Use | |
* xStreamBufferSendFromISR() to write to a stream buffer from an interrupt | |
* service routine (ISR). | |
* | |
* @param xStreamBuffer The handle of the stream buffer to which a stream is | |
* being sent. | |
* | |
* @param pvTxData A pointer to the buffer that holds the bytes to be copied | |
* into the stream buffer. | |
* | |
* @param xDataLengthBytes The maximum number of bytes to copy from pvTxData | |
* into the stream buffer. | |
* | |
* @param xTicksToWait The maximum amount of time the task should remain in the | |
* Blocked state to wait for enough space to become available in the stream | |
* buffer, should the stream buffer contain too little space to hold the | |
* another xDataLengthBytes bytes. The block time is specified in tick periods, | |
* so the absolute time it represents is dependent on the tick frequency. The | |
* macro pdMS_TO_TICKS() can be used to convert a time specified in milliseconds | |
* into a time specified in ticks. Setting xTicksToWait to portMAX_DELAY will | |
* cause the task to wait indefinitely (without timing out), provided | |
* INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h. If a task times out | |
* before it can write all xDataLengthBytes into the buffer it will still write | |
* as many bytes as possible. A task does not use any CPU time when it is in | |
* the blocked state. | |
* | |
* @return The number of bytes written to the stream buffer. If a task times | |
* out before it can write all xDataLengthBytes into the buffer it will still | |
* write as many bytes as possible. | |
* | |
* Example use: | |
* <pre> | |
* void vAFunction( StreamBufferHandle_t xStreamBuffer ) | |
* { | |
* size_t xBytesSent; | |
* uint8_t ucArrayToSend[] = { 0, 1, 2, 3 }; | |
* char *pcStringToSend = "String to send"; | |
* const TickType_t x100ms = pdMS_TO_TICKS( 100 ); | |
* | |
* // Send an array to the stream buffer, blocking for a maximum of 100ms to | |
* // wait for enough space to be available in the stream buffer. | |
* xBytesSent = xStreamBufferSend( xStreamBuffer, ( void * ) ucArrayToSend, sizeof( ucArrayToSend ), x100ms ); | |
* | |
* if( xBytesSent != sizeof( ucArrayToSend ) ) | |
* { | |
* // The call to xStreamBufferSend() times out before there was enough | |
* // space in the buffer for the data to be written, but it did | |
* // successfully write xBytesSent bytes. | |
* } | |
* | |
* // Send the string to the stream buffer. Return immediately if there is not | |
* // enough space in the buffer. | |
* xBytesSent = xStreamBufferSend( xStreamBuffer, ( void * ) pcStringToSend, strlen( pcStringToSend ), 0 ); | |
* | |
* if( xBytesSent != strlen( pcStringToSend ) ) | |
* { | |
* // The entire string could not be added to the stream buffer because | |
* // there was not enough free space in the buffer, but xBytesSent bytes | |
* // were sent. Could try again to send the remaining bytes. | |
* } | |
* } | |
* </pre> | |
* \defgroup xStreamBufferSend xStreamBufferSend | |
* \ingroup StreamBufferManagement | |
*/ | |
size_t xStreamBufferSend( StreamBufferHandle_t xStreamBuffer, | |
const void * pvTxData, | |
size_t xDataLengthBytes, | |
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* size_t xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer, | |
* const void *pvTxData, | |
* size_t xDataLengthBytes, | |
* BaseType_t *pxHigherPriorityTaskWoken ); | |
* </pre> | |
* | |
* Interrupt safe version of the API function that sends a stream of bytes to | |
* the stream buffer. | |
* | |
* ***NOTE***: Uniquely among FreeRTOS objects, the stream buffer | |
* implementation (so also the message buffer implementation, as message buffers | |
* are built on top of stream buffers) assumes there is only one task or | |
* interrupt that will write to the buffer (the writer), and only one task or | |
* interrupt that will read from the buffer (the reader). It is safe for the | |
* writer and reader to be different tasks or interrupts, but, unlike other | |
* FreeRTOS objects, it is not safe to have multiple different writers or | |
* multiple different readers. If there are to be multiple different writers | |
* then the application writer must place each call to a writing API function | |
* (such as xStreamBufferSend()) inside a critical section and set the send | |
* block time to 0. Likewise, if there are to be multiple different readers | |
* then the application writer must place each call to a reading API function | |
* (such as xStreamBufferReceive()) inside a critical section and set the receive | |
* block time to 0. | |
* | |
* Use xStreamBufferSend() to write to a stream buffer from a task. Use | |
* xStreamBufferSendFromISR() to write to a stream buffer from an interrupt | |
* service routine (ISR). | |
* | |
* @param xStreamBuffer The handle of the stream buffer to which a stream is | |
* being sent. | |
* | |
* @param pvTxData A pointer to the data that is to be copied into the stream | |
* buffer. | |
* | |
* @param xDataLengthBytes The maximum number of bytes to copy from pvTxData | |
* into the stream buffer. | |
* | |
* @param pxHigherPriorityTaskWoken It is possible that a stream buffer will | |
* have a task blocked on it waiting for data. Calling | |
* xStreamBufferSendFromISR() can make data available, and so cause a task that | |
* was waiting for data to leave the Blocked state. If calling | |
* xStreamBufferSendFromISR() causes a task to leave the Blocked state, and the | |
* unblocked task has a priority higher than the currently executing task (the | |
* task that was interrupted), then, internally, xStreamBufferSendFromISR() | |
* will set *pxHigherPriorityTaskWoken to pdTRUE. If | |
* xStreamBufferSendFromISR() sets this value to pdTRUE, then normally a | |
* context switch should be performed before the interrupt is exited. This will | |
* ensure that the interrupt returns directly to the highest priority Ready | |
* state task. *pxHigherPriorityTaskWoken should be set to pdFALSE before it | |
* is passed into the function. See the example code below for an example. | |
* | |
* @return The number of bytes actually written to the stream buffer, which will | |
* be less than xDataLengthBytes if the stream buffer didn't have enough free | |
* space for all the bytes to be written. | |
* | |
* Example use: | |
* <pre> | |
* // A stream buffer that has already been created. | |
* StreamBufferHandle_t xStreamBuffer; | |
* | |
* void vAnInterruptServiceRoutine( void ) | |
* { | |
* size_t xBytesSent; | |
* char *pcStringToSend = "String to send"; | |
* BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE. | |
* | |
* // Attempt to send the string to the stream buffer. | |
* xBytesSent = xStreamBufferSendFromISR( xStreamBuffer, | |
* ( void * ) pcStringToSend, | |
* strlen( pcStringToSend ), | |
* &xHigherPriorityTaskWoken ); | |
* | |
* if( xBytesSent != strlen( pcStringToSend ) ) | |
* { | |
* // There was not enough free space in the stream buffer for the entire | |
* // string to be written, ut xBytesSent bytes were written. | |
* } | |
* | |
* // If xHigherPriorityTaskWoken was set to pdTRUE inside | |
* // xStreamBufferSendFromISR() then a task that has a priority above the | |
* // priority of the currently executing task was unblocked and a context | |
* // switch should be performed to ensure the ISR returns to the unblocked | |
* // task. In most FreeRTOS ports this is done by simply passing | |
* // xHigherPriorityTaskWoken into taskYIELD_FROM_ISR(), which will test the | |
* // variables value, and perform the context switch if necessary. Check the | |
* // documentation for the port in use for port specific instructions. | |
* taskYIELD_FROM_ISR( xHigherPriorityTaskWoken ); | |
* } | |
* </pre> | |
* \defgroup xStreamBufferSendFromISR xStreamBufferSendFromISR | |
* \ingroup StreamBufferManagement | |
*/ | |
size_t xStreamBufferSendFromISR( StreamBufferHandle_t xStreamBuffer, | |
const void * pvTxData, | |
size_t xDataLengthBytes, | |
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* size_t xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer, | |
* void *pvRxData, | |
* size_t xBufferLengthBytes, | |
* TickType_t xTicksToWait ); | |
* </pre> | |
* | |
* Receives bytes from a stream buffer. | |
* | |
* ***NOTE***: Uniquely among FreeRTOS objects, the stream buffer | |
* implementation (so also the message buffer implementation, as message buffers | |
* are built on top of stream buffers) assumes there is only one task or | |
* interrupt that will write to the buffer (the writer), and only one task or | |
* interrupt that will read from the buffer (the reader). It is safe for the | |
* writer and reader to be different tasks or interrupts, but, unlike other | |
* FreeRTOS objects, it is not safe to have multiple different writers or | |
* multiple different readers. If there are to be multiple different writers | |
* then the application writer must place each call to a writing API function | |
* (such as xStreamBufferSend()) inside a critical section and set the send | |
* block time to 0. Likewise, if there are to be multiple different readers | |
* then the application writer must place each call to a reading API function | |
* (such as xStreamBufferReceive()) inside a critical section and set the receive | |
* block time to 0. | |
* | |
* Use xStreamBufferReceive() to read from a stream buffer from a task. Use | |
* xStreamBufferReceiveFromISR() to read from a stream buffer from an | |
* interrupt service routine (ISR). | |
* | |
* @param xStreamBuffer The handle of the stream buffer from which bytes are to | |
* be received. | |
* | |
* @param pvRxData A pointer to the buffer into which the received bytes will be | |
* copied. | |
* | |
* @param xBufferLengthBytes The length of the buffer pointed to by the | |
* pvRxData parameter. This sets the maximum number of bytes to receive in one | |
* call. xStreamBufferReceive will return as many bytes as possible up to a | |
* maximum set by xBufferLengthBytes. | |
* | |
* @param xTicksToWait The maximum amount of time the task should remain in the | |
* Blocked state to wait for data to become available if the stream buffer is | |
* empty. xStreamBufferReceive() will return immediately if xTicksToWait is | |
* zero. The block time is specified in tick periods, so the absolute time it | |
* represents is dependent on the tick frequency. The macro pdMS_TO_TICKS() can | |
* be used to convert a time specified in milliseconds into a time specified in | |
* ticks. Setting xTicksToWait to portMAX_DELAY will cause the task to wait | |
* indefinitely (without timing out), provided INCLUDE_vTaskSuspend is set to 1 | |
* in FreeRTOSConfig.h. A task does not use any CPU time when it is in the | |
* Blocked state. | |
* | |
* @return The number of bytes actually read from the stream buffer, which will | |
* be less than xBufferLengthBytes if the call to xStreamBufferReceive() timed | |
* out before xBufferLengthBytes were available. | |
* | |
* Example use: | |
* <pre> | |
* void vAFunction( StreamBuffer_t xStreamBuffer ) | |
* { | |
* uint8_t ucRxData[ 20 ]; | |
* size_t xReceivedBytes; | |
* const TickType_t xBlockTime = pdMS_TO_TICKS( 20 ); | |
* | |
* // Receive up to another sizeof( ucRxData ) bytes from the stream buffer. | |
* // Wait in the Blocked state (so not using any CPU processing time) for a | |
* // maximum of 100ms for the full sizeof( ucRxData ) number of bytes to be | |
* // available. | |
* xReceivedBytes = xStreamBufferReceive( xStreamBuffer, | |
* ( void * ) ucRxData, | |
* sizeof( ucRxData ), | |
* xBlockTime ); | |
* | |
* if( xReceivedBytes > 0 ) | |
* { | |
* // A ucRxData contains another xRecievedBytes bytes of data, which can | |
* // be processed here.... | |
* } | |
* } | |
* </pre> | |
* \defgroup xStreamBufferReceive xStreamBufferReceive | |
* \ingroup StreamBufferManagement | |
*/ | |
size_t xStreamBufferReceive( StreamBufferHandle_t xStreamBuffer, | |
void * pvRxData, | |
size_t xBufferLengthBytes, | |
TickType_t xTicksToWait ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* size_t xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer, | |
* void *pvRxData, | |
* size_t xBufferLengthBytes, | |
* BaseType_t *pxHigherPriorityTaskWoken ); | |
* </pre> | |
* | |
* An interrupt safe version of the API function that receives bytes from a | |
* stream buffer. | |
* | |
* Use xStreamBufferReceive() to read bytes from a stream buffer from a task. | |
* Use xStreamBufferReceiveFromISR() to read bytes from a stream buffer from an | |
* interrupt service routine (ISR). | |
* | |
* @param xStreamBuffer The handle of the stream buffer from which a stream | |
* is being received. | |
* | |
* @param pvRxData A pointer to the buffer into which the received bytes are | |
* copied. | |
* | |
* @param xBufferLengthBytes The length of the buffer pointed to by the | |
* pvRxData parameter. This sets the maximum number of bytes to receive in one | |
* call. xStreamBufferReceive will return as many bytes as possible up to a | |
* maximum set by xBufferLengthBytes. | |
* | |
* @param pxHigherPriorityTaskWoken It is possible that a stream buffer will | |
* have a task blocked on it waiting for space to become available. Calling | |
* xStreamBufferReceiveFromISR() can make space available, and so cause a task | |
* that is waiting for space to leave the Blocked state. If calling | |
* xStreamBufferReceiveFromISR() causes a task to leave the Blocked state, and | |
* the unblocked task has a priority higher than the currently executing task | |
* (the task that was interrupted), then, internally, | |
* xStreamBufferReceiveFromISR() will set *pxHigherPriorityTaskWoken to pdTRUE. | |
* If xStreamBufferReceiveFromISR() sets this value to pdTRUE, then normally a | |
* context switch should be performed before the interrupt is exited. That will | |
* ensure the interrupt returns directly to the highest priority Ready state | |
* task. *pxHigherPriorityTaskWoken should be set to pdFALSE before it is | |
* passed into the function. See the code example below for an example. | |
* | |
* @return The number of bytes read from the stream buffer, if any. | |
* | |
* Example use: | |
* <pre> | |
* // A stream buffer that has already been created. | |
* StreamBuffer_t xStreamBuffer; | |
* | |
* void vAnInterruptServiceRoutine( void ) | |
* { | |
* uint8_t ucRxData[ 20 ]; | |
* size_t xReceivedBytes; | |
* BaseType_t xHigherPriorityTaskWoken = pdFALSE; // Initialised to pdFALSE. | |
* | |
* // Receive the next stream from the stream buffer. | |
* xReceivedBytes = xStreamBufferReceiveFromISR( xStreamBuffer, | |
* ( void * ) ucRxData, | |
* sizeof( ucRxData ), | |
* &xHigherPriorityTaskWoken ); | |
* | |
* if( xReceivedBytes > 0 ) | |
* { | |
* // ucRxData contains xReceivedBytes read from the stream buffer. | |
* // Process the stream here.... | |
* } | |
* | |
* // If xHigherPriorityTaskWoken was set to pdTRUE inside | |
* // xStreamBufferReceiveFromISR() then a task that has a priority above the | |
* // priority of the currently executing task was unblocked and a context | |
* // switch should be performed to ensure the ISR returns to the unblocked | |
* // task. In most FreeRTOS ports this is done by simply passing | |
* // xHigherPriorityTaskWoken into taskYIELD_FROM_ISR(), which will test the | |
* // variables value, and perform the context switch if necessary. Check the | |
* // documentation for the port in use for port specific instructions. | |
* taskYIELD_FROM_ISR( xHigherPriorityTaskWoken ); | |
* } | |
* </pre> | |
* \defgroup xStreamBufferReceiveFromISR xStreamBufferReceiveFromISR | |
* \ingroup StreamBufferManagement | |
*/ | |
size_t xStreamBufferReceiveFromISR( StreamBufferHandle_t xStreamBuffer, | |
void * pvRxData, | |
size_t xBufferLengthBytes, | |
BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* void vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer ); | |
* </pre> | |
* | |
* Deletes a stream buffer that was previously created using a call to | |
* xStreamBufferCreate() or xStreamBufferCreateStatic(). If the stream | |
* buffer was created using dynamic memory (that is, by xStreamBufferCreate()), | |
* then the allocated memory is freed. | |
* | |
* A stream buffer handle must not be used after the stream buffer has been | |
* deleted. | |
* | |
* @param xStreamBuffer The handle of the stream buffer to be deleted. | |
* | |
* \defgroup vStreamBufferDelete vStreamBufferDelete | |
* \ingroup StreamBufferManagement | |
*/ | |
void vStreamBufferDelete( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* BaseType_t xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer ); | |
* </pre> | |
* | |
* Queries a stream buffer to see if it is full. A stream buffer is full if it | |
* does not have any free space, and therefore cannot accept any more data. | |
* | |
* @param xStreamBuffer The handle of the stream buffer being queried. | |
* | |
* @return If the stream buffer is full then pdTRUE is returned. Otherwise | |
* pdFALSE is returned. | |
* | |
* \defgroup xStreamBufferIsFull xStreamBufferIsFull | |
* \ingroup StreamBufferManagement | |
*/ | |
BaseType_t xStreamBufferIsFull( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* BaseType_t xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer ); | |
* </pre> | |
* | |
* Queries a stream buffer to see if it is empty. A stream buffer is empty if | |
* it does not contain any data. | |
* | |
* @param xStreamBuffer The handle of the stream buffer being queried. | |
* | |
* @return If the stream buffer is empty then pdTRUE is returned. Otherwise | |
* pdFALSE is returned. | |
* | |
* \defgroup xStreamBufferIsEmpty xStreamBufferIsEmpty | |
* \ingroup StreamBufferManagement | |
*/ | |
BaseType_t xStreamBufferIsEmpty( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* BaseType_t xStreamBufferReset( StreamBufferHandle_t xStreamBuffer ); | |
* </pre> | |
* | |
* Resets a stream buffer to its initial, empty, state. Any data that was in | |
* the stream buffer is discarded. A stream buffer can only be reset if there | |
* are no tasks blocked waiting to either send to or receive from the stream | |
* buffer. | |
* | |
* @param xStreamBuffer The handle of the stream buffer being reset. | |
* | |
* @return If the stream buffer is reset then pdPASS is returned. If there was | |
* a task blocked waiting to send to or read from the stream buffer then the | |
* stream buffer is not reset and pdFAIL is returned. | |
* | |
* \defgroup xStreamBufferReset xStreamBufferReset | |
* \ingroup StreamBufferManagement | |
*/ | |
BaseType_t xStreamBufferReset( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* size_t xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer ); | |
* </pre> | |
* | |
* Queries a stream buffer to see how much free space it contains, which is | |
* equal to the amount of data that can be sent to the stream buffer before it | |
* is full. | |
* | |
* @param xStreamBuffer The handle of the stream buffer being queried. | |
* | |
* @return The number of bytes that can be written to the stream buffer before | |
* the stream buffer would be full. | |
* | |
* \defgroup xStreamBufferSpacesAvailable xStreamBufferSpacesAvailable | |
* \ingroup StreamBufferManagement | |
*/ | |
size_t xStreamBufferSpacesAvailable( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* size_t xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer ); | |
* </pre> | |
* | |
* Queries a stream buffer to see how much data it contains, which is equal to | |
* the number of bytes that can be read from the stream buffer before the stream | |
* buffer would be empty. | |
* | |
* @param xStreamBuffer The handle of the stream buffer being queried. | |
* | |
* @return The number of bytes that can be read from the stream buffer before | |
* the stream buffer would be empty. | |
* | |
* \defgroup xStreamBufferBytesAvailable xStreamBufferBytesAvailable | |
* \ingroup StreamBufferManagement | |
*/ | |
size_t xStreamBufferBytesAvailable( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer, size_t xTriggerLevel ); | |
* </pre> | |
* | |
* A stream buffer's trigger level is the number of bytes that must be in the | |
* stream buffer before a task that is blocked on the stream buffer to | |
* wait for data is moved out of the blocked state. For example, if a task is | |
* blocked on a read of an empty stream buffer that has a trigger level of 1 | |
* then the task will be unblocked when a single byte is written to the buffer | |
* or the task's block time expires. As another example, if a task is blocked | |
* on a read of an empty stream buffer that has a trigger level of 10 then the | |
* task will not be unblocked until the stream buffer contains at least 10 bytes | |
* or the task's block time expires. If a reading task's block time expires | |
* before the trigger level is reached then the task will still receive however | |
* many bytes are actually available. Setting a trigger level of 0 will result | |
* in a trigger level of 1 being used. It is not valid to specify a trigger | |
* level that is greater than the buffer size. | |
* | |
* A trigger level is set when the stream buffer is created, and can be modified | |
* using xStreamBufferSetTriggerLevel(). | |
* | |
* @param xStreamBuffer The handle of the stream buffer being updated. | |
* | |
* @param xTriggerLevel The new trigger level for the stream buffer. | |
* | |
* @return If xTriggerLevel was less than or equal to the stream buffer's length | |
* then the trigger level will be updated and pdTRUE is returned. Otherwise | |
* pdFALSE is returned. | |
* | |
* \defgroup xStreamBufferSetTriggerLevel xStreamBufferSetTriggerLevel | |
* \ingroup StreamBufferManagement | |
*/ | |
BaseType_t xStreamBufferSetTriggerLevel( StreamBufferHandle_t xStreamBuffer, | |
size_t xTriggerLevel ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken ); | |
* </pre> | |
* | |
* For advanced users only. | |
* | |
* The sbSEND_COMPLETED() macro is called from within the FreeRTOS APIs when | |
* data is sent to a message buffer or stream buffer. If there was a task that | |
* was blocked on the message or stream buffer waiting for data to arrive then | |
* the sbSEND_COMPLETED() macro sends a notification to the task to remove it | |
* from the Blocked state. xStreamBufferSendCompletedFromISR() does the same | |
* thing. It is provided to enable application writers to implement their own | |
* version of sbSEND_COMPLETED(), and MUST NOT BE USED AT ANY OTHER TIME. | |
* | |
* See the example implemented in FreeRTOS/Demo/Minimal/MessageBufferAMP.c for | |
* additional information. | |
* | |
* @param xStreamBuffer The handle of the stream buffer to which data was | |
* written. | |
* | |
* @param pxHigherPriorityTaskWoken *pxHigherPriorityTaskWoken should be | |
* initialised to pdFALSE before it is passed into | |
* xStreamBufferSendCompletedFromISR(). If calling | |
* xStreamBufferSendCompletedFromISR() removes a task from the Blocked state, | |
* and the task has a priority above the priority of the currently running task, | |
* then *pxHigherPriorityTaskWoken will get set to pdTRUE indicating that a | |
* context switch should be performed before exiting the ISR. | |
* | |
* @return If a task was removed from the Blocked state then pdTRUE is returned. | |
* Otherwise pdFALSE is returned. | |
* | |
* \defgroup xStreamBufferSendCompletedFromISR xStreamBufferSendCompletedFromISR | |
* \ingroup StreamBufferManagement | |
*/ | |
BaseType_t xStreamBufferSendCompletedFromISR( StreamBufferHandle_t xStreamBuffer, | |
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION; | |
/** | |
* stream_buffer.h | |
* | |
* <pre> | |
* BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer, BaseType_t *pxHigherPriorityTaskWoken ); | |
* </pre> | |
* | |
* For advanced users only. | |
* | |
* The sbRECEIVE_COMPLETED() macro is called from within the FreeRTOS APIs when | |
* data is read out of a message buffer or stream buffer. If there was a task | |
* that was blocked on the message or stream buffer waiting for data to arrive | |
* then the sbRECEIVE_COMPLETED() macro sends a notification to the task to | |
* remove it from the Blocked state. xStreamBufferReceiveCompletedFromISR() | |
* does the same thing. It is provided to enable application writers to | |
* implement their own version of sbRECEIVE_COMPLETED(), and MUST NOT BE USED AT | |
* ANY OTHER TIME. | |
* | |
* See the example implemented in FreeRTOS/Demo/Minimal/MessageBufferAMP.c for | |
* additional information. | |
* | |
* @param xStreamBuffer The handle of the stream buffer from which data was | |
* read. | |
* | |
* @param pxHigherPriorityTaskWoken *pxHigherPriorityTaskWoken should be | |
* initialised to pdFALSE before it is passed into | |
* xStreamBufferReceiveCompletedFromISR(). If calling | |
* xStreamBufferReceiveCompletedFromISR() removes a task from the Blocked state, | |
* and the task has a priority above the priority of the currently running task, | |
* then *pxHigherPriorityTaskWoken will get set to pdTRUE indicating that a | |
* context switch should be performed before exiting the ISR. | |
* | |
* @return If a task was removed from the Blocked state then pdTRUE is returned. | |
* Otherwise pdFALSE is returned. | |
* | |
* \defgroup xStreamBufferReceiveCompletedFromISR xStreamBufferReceiveCompletedFromISR | |
* \ingroup StreamBufferManagement | |
*/ | |
BaseType_t xStreamBufferReceiveCompletedFromISR( StreamBufferHandle_t xStreamBuffer, | |
BaseType_t * pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION; | |
/* Functions below here are not part of the public API. */ | |
StreamBufferHandle_t xStreamBufferGenericCreate( size_t xBufferSizeBytes, | |
size_t xTriggerLevelBytes, | |
BaseType_t xIsMessageBuffer ) PRIVILEGED_FUNCTION; | |
StreamBufferHandle_t xStreamBufferGenericCreateStatic( size_t xBufferSizeBytes, | |
size_t xTriggerLevelBytes, | |
BaseType_t xIsMessageBuffer, | |
uint8_t * const pucStreamBufferStorageArea, | |
StaticStreamBuffer_t * const pxStaticStreamBuffer ) PRIVILEGED_FUNCTION; | |
size_t xStreamBufferNextMessageLengthBytes( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION; | |
#if ( configUSE_TRACE_FACILITY == 1 ) | |
void vStreamBufferSetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer, | |
UBaseType_t uxStreamBufferNumber ) PRIVILEGED_FUNCTION; | |
UBaseType_t uxStreamBufferGetStreamBufferNumber( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION; | |
uint8_t ucStreamBufferGetStreamBufferType( StreamBufferHandle_t xStreamBuffer ) PRIVILEGED_FUNCTION; | |
#endif | |
/* *INDENT-OFF* */ | |
#if defined( __cplusplus ) | |
} | |
#endif | |
/* *INDENT-ON* */ | |
#endif /* !defined( STREAM_BUFFER_H ) */ |