| /* |
| * FreeRTOS Kernel <DEVELOPMENT BRANCH> |
| * Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved. |
| * |
| * SPDX-License-Identifier: MIT |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy of |
| * this software and associated documentation files (the "Software"), to deal in |
| * the Software without restriction, including without limitation the rights to |
| * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of |
| * the Software, and to permit persons to whom the Software is furnished to do so, |
| * subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in all |
| * copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS |
| * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR |
| * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER |
| * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN |
| * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * https://www.FreeRTOS.org |
| * https://github.com/FreeRTOS |
| * |
| */ |
| |
| /* Standard includes. */ |
| #include <stdlib.h> |
| #include <string.h> |
| |
| /* Scheduler includes. */ |
| #include "FreeRTOS.h" |
| #include "task.h" |
| |
| #ifndef configINTERRUPT_CONTROLLER_BASE_ADDRESS |
| #error configINTERRUPT_CONTROLLER_BASE_ADDRESS must be defined. See https://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html |
| #endif |
| |
| #ifndef configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET |
| #error configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET must be defined. See https://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html |
| #endif |
| |
| #ifndef configUNIQUE_INTERRUPT_PRIORITIES |
| #error configUNIQUE_INTERRUPT_PRIORITIES must be defined. See https://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html |
| #endif |
| |
| #ifndef configSETUP_TICK_INTERRUPT |
| #error configSETUP_TICK_INTERRUPT() must be defined. See https://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html |
| #endif /* configSETUP_TICK_INTERRUPT */ |
| |
| #ifndef configMAX_API_CALL_INTERRUPT_PRIORITY |
| #error configMAX_API_CALL_INTERRUPT_PRIORITY must be defined. See https://www.FreeRTOS.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html |
| #endif |
| |
| #if configMAX_API_CALL_INTERRUPT_PRIORITY == 0 |
| #error configMAX_API_CALL_INTERRUPT_PRIORITY must not be set to 0 |
| #endif |
| |
| #if configMAX_API_CALL_INTERRUPT_PRIORITY > configUNIQUE_INTERRUPT_PRIORITIES |
| #error configMAX_API_CALL_INTERRUPT_PRIORITY must be less than or equal to configUNIQUE_INTERRUPT_PRIORITIES as the lower the numeric priority value the higher the logical interrupt priority |
| #endif |
| |
| #if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 |
| /* Check the configuration. */ |
| #if( configMAX_PRIORITIES > 32 ) |
| #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice. |
| #endif |
| #endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ |
| |
| /* In case security extensions are implemented. */ |
| #if configMAX_API_CALL_INTERRUPT_PRIORITY <= ( configUNIQUE_INTERRUPT_PRIORITIES / 2 ) |
| #error configMAX_API_CALL_INTERRUPT_PRIORITY must be greater than ( configUNIQUE_INTERRUPT_PRIORITIES / 2 ) |
| #endif |
| |
| /* Some vendor specific files default configCLEAR_TICK_INTERRUPT() in |
| portmacro.h. */ |
| #ifndef configCLEAR_TICK_INTERRUPT |
| #define configCLEAR_TICK_INTERRUPT() |
| #endif |
| |
| /* A critical section is exited when the critical section nesting count reaches |
| this value. */ |
| #define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 ) |
| |
| /* In all GICs 255 can be written to the priority mask register to unmask all |
| (but the lowest) interrupt priority. */ |
| #define portUNMASK_VALUE ( 0xFFUL ) |
| |
| /* Tasks are not created with a floating point context, but can be given a |
| floating point context after they have been created. A variable is stored as |
| part of the tasks context that holds portNO_FLOATING_POINT_CONTEXT if the task |
| does not have an FPU context, or any other value if the task does have an FPU |
| context. */ |
| #define portNO_FLOATING_POINT_CONTEXT ( ( StackType_t ) 0 ) |
| |
| /* Constants required to setup the initial task context. */ |
| #define portINITIAL_SPSR ( ( StackType_t ) 0x1f ) /* System mode, ARM mode, IRQ enabled FIQ enabled. */ |
| #define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 ) |
| #define portINTERRUPT_ENABLE_BIT ( 0x80UL ) |
| #define portTHUMB_MODE_ADDRESS ( 0x01UL ) |
| |
| /* Used by portASSERT_IF_INTERRUPT_PRIORITY_INVALID() when ensuring the binary |
| point is zero. */ |
| #define portBINARY_POINT_BITS ( ( uint8_t ) 0x03 ) |
| |
| /* Masks all bits in the APSR other than the mode bits. */ |
| #define portAPSR_MODE_BITS_MASK ( 0x1F ) |
| |
| /* The value of the mode bits in the APSR when the CPU is executing in user |
| mode. */ |
| #define portAPSR_USER_MODE ( 0x10 ) |
| |
| /* The critical section macros only mask interrupts up to an application |
| determined priority level. Sometimes it is necessary to turn interrupt off in |
| the CPU itself before modifying certain hardware registers. */ |
| #define portCPU_IRQ_DISABLE() \ |
| __asm volatile ( "CPSID i" ::: "memory" ); \ |
| __asm volatile ( "DSB" ); \ |
| __asm volatile ( "ISB" ); |
| |
| #define portCPU_IRQ_ENABLE() \ |
| __asm volatile ( "CPSIE i" ::: "memory" ); \ |
| __asm volatile ( "DSB" ); \ |
| __asm volatile ( "ISB" ); |
| |
| |
| /* Macro to unmask all interrupt priorities. */ |
| #define portCLEAR_INTERRUPT_MASK() \ |
| { \ |
| portCPU_IRQ_DISABLE(); \ |
| portICCPMR_PRIORITY_MASK_REGISTER = portUNMASK_VALUE; \ |
| __asm volatile ( "DSB \n" \ |
| "ISB \n" ); \ |
| portCPU_IRQ_ENABLE(); \ |
| } |
| |
| #define portINTERRUPT_PRIORITY_REGISTER_OFFSET 0x400UL |
| #define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) |
| #define portBIT_0_SET ( ( uint8_t ) 0x01 ) |
| |
| /* Let the user override the pre-loading of the initial LR with the address of |
| prvTaskExitError() in case it messes up unwinding of the stack in the |
| debugger. */ |
| #ifdef configTASK_RETURN_ADDRESS |
| #define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS |
| #else |
| #define portTASK_RETURN_ADDRESS prvTaskExitError |
| #endif |
| |
| /* The space on the stack required to hold the FPU registers. This is 32 64-bit |
| registers, plus a 32-bit status register. */ |
| #define portFPU_REGISTER_WORDS ( ( 32 * 2 ) + 1 ) |
| |
| /*-----------------------------------------------------------*/ |
| |
| /* |
| * Starts the first task executing. This function is necessarily written in |
| * assembly code so is implemented in portASM.s. |
| */ |
| extern void vPortRestoreTaskContext( void ); |
| |
| /* |
| * Used to catch tasks that attempt to return from their implementing function. |
| */ |
| static void prvTaskExitError( void ); |
| |
| /* |
| * If the application provides an implementation of vApplicationIRQHandler(), |
| * then it will get called directly without saving the FPU registers on |
| * interrupt entry, and this weak implementation of |
| * vApplicationFPUSafeIRQHandler() is just provided to remove linkage errors - |
| * it should never actually get called so its implementation contains a |
| * call to configASSERT() that will always fail. |
| * |
| * If the application provides its own implementation of |
| * vApplicationFPUSafeIRQHandler() then the implementation of |
| * vApplicationIRQHandler() provided in portASM.S will save the FPU registers |
| * before calling it. |
| * |
| * Therefore, if the application writer wants FPU registers to be saved on |
| * interrupt entry their IRQ handler must be called |
| * vApplicationFPUSafeIRQHandler(), and if the application writer does not want |
| * FPU registers to be saved on interrupt entry their IRQ handler must be |
| * called vApplicationIRQHandler(). |
| */ |
| void vApplicationFPUSafeIRQHandler( uint32_t ulICCIAR ) __attribute__((weak) ); |
| |
| /*-----------------------------------------------------------*/ |
| |
| /* A variable is used to keep track of the critical section nesting. This |
| variable has to be stored as part of the task context and must be initialised to |
| a non zero value to ensure interrupts don't inadvertently become unmasked before |
| the scheduler starts. As it is stored as part of the task context it will |
| automatically be set to 0 when the first task is started. */ |
| volatile uint32_t ulCriticalNesting = 9999UL; |
| |
| /* Saved as part of the task context. If ulPortTaskHasFPUContext is non-zero then |
| a floating point context must be saved and restored for the task. */ |
| volatile uint32_t ulPortTaskHasFPUContext = pdFALSE; |
| |
| /* Set to 1 to pend a context switch from an ISR. */ |
| volatile uint32_t ulPortYieldRequired = pdFALSE; |
| |
| /* Counts the interrupt nesting depth. A context switch is only performed if |
| if the nesting depth is 0. */ |
| volatile uint32_t ulPortInterruptNesting = 0UL; |
| |
| /* Used in the asm file. */ |
| __attribute__(( used )) const uint32_t ulICCIAR = portICCIAR_INTERRUPT_ACKNOWLEDGE_REGISTER_ADDRESS; |
| __attribute__(( used )) const uint32_t ulICCEOIR = portICCEOIR_END_OF_INTERRUPT_REGISTER_ADDRESS; |
| __attribute__(( used )) const uint32_t ulICCPMR = portICCPMR_PRIORITY_MASK_REGISTER_ADDRESS; |
| __attribute__(( used )) const uint32_t ulMaxAPIPriorityMask = ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ); |
| |
| /*-----------------------------------------------------------*/ |
| |
| /* |
| * See header file for description. |
| */ |
| StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) |
| { |
| /* Setup the initial stack of the task. The stack is set exactly as |
| expected by the portRESTORE_CONTEXT() macro. |
| |
| The fist real value on the stack is the status register, which is set for |
| system mode, with interrupts enabled. A few NULLs are added first to ensure |
| GDB does not try decoding a non-existent return address. */ |
| *pxTopOfStack = ( StackType_t ) NULL; |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) NULL; |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) NULL; |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) portINITIAL_SPSR; |
| |
| if( ( ( uint32_t ) pxCode & portTHUMB_MODE_ADDRESS ) != 0x00UL ) |
| { |
| /* The task will start in THUMB mode. */ |
| *pxTopOfStack |= portTHUMB_MODE_BIT; |
| } |
| |
| pxTopOfStack--; |
| |
| /* Next the return address, which in this case is the start of the task. */ |
| *pxTopOfStack = ( StackType_t ) pxCode; |
| pxTopOfStack--; |
| |
| /* Next all the registers other than the stack pointer. */ |
| *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* R14 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */ |
| pxTopOfStack--; |
| *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ |
| pxTopOfStack--; |
| |
| /* The task will start with a critical nesting count of 0 as interrupts are |
| enabled. */ |
| *pxTopOfStack = portNO_CRITICAL_NESTING; |
| |
| #if( configUSE_TASK_FPU_SUPPORT == 1 ) |
| { |
| /* The task will start without a floating point context. A task that |
| uses the floating point hardware must call vPortTaskUsesFPU() before |
| executing any floating point instructions. */ |
| pxTopOfStack--; |
| *pxTopOfStack = portNO_FLOATING_POINT_CONTEXT; |
| } |
| #elif( configUSE_TASK_FPU_SUPPORT == 2 ) |
| { |
| /* The task will start with a floating point context. Leave enough |
| space for the registers - and ensure they are initialised to 0. */ |
| pxTopOfStack -= portFPU_REGISTER_WORDS; |
| memset( pxTopOfStack, 0x00, portFPU_REGISTER_WORDS * sizeof( StackType_t ) ); |
| |
| pxTopOfStack--; |
| *pxTopOfStack = pdTRUE; |
| ulPortTaskHasFPUContext = pdTRUE; |
| } |
| #else |
| { |
| #error Invalid configUSE_TASK_FPU_SUPPORT setting - configUSE_TASK_FPU_SUPPORT must be set to 1, 2, or left undefined. |
| } |
| #endif |
| |
| return pxTopOfStack; |
| } |
| /*-----------------------------------------------------------*/ |
| |
| static void prvTaskExitError( void ) |
| { |
| /* A function that implements a task must not exit or attempt to return to |
| its caller as there is nothing to return to. If a task wants to exit it |
| should instead call vTaskDelete( NULL ). |
| |
| Artificially force an assert() to be triggered if configASSERT() is |
| defined, then stop here so application writers can catch the error. */ |
| configASSERT( ulPortInterruptNesting == ~0UL ); |
| portDISABLE_INTERRUPTS(); |
| for( ;; ); |
| } |
| /*-----------------------------------------------------------*/ |
| |
| BaseType_t xPortStartScheduler( void ) |
| { |
| uint32_t ulAPSR; |
| |
| #if( configASSERT_DEFINED == 1 ) |
| { |
| volatile uint8_t ucOriginalPriority; |
| volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( configINTERRUPT_CONTROLLER_BASE_ADDRESS + portINTERRUPT_PRIORITY_REGISTER_OFFSET ); |
| volatile uint8_t ucMaxPriorityValue; |
| |
| /* Determine how many priority bits are implemented in the GIC. |
| |
| Save the interrupt priority value that is about to be clobbered. */ |
| ucOriginalPriority = *pucFirstUserPriorityRegister; |
| |
| /* Determine the number of priority bits available. First write to |
| all possible bits. */ |
| *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE; |
| |
| /* Read the value back to see how many bits stuck. */ |
| ucMaxPriorityValue = *pucFirstUserPriorityRegister; |
| |
| /* Shift to the least significant bits. */ |
| while( ( ucMaxPriorityValue & portBIT_0_SET ) != portBIT_0_SET ) |
| { |
| ucMaxPriorityValue >>= ( uint8_t ) 0x01; |
| } |
| |
| /* Sanity check configUNIQUE_INTERRUPT_PRIORITIES matches the read |
| value. */ |
| configASSERT( ucMaxPriorityValue == portLOWEST_INTERRUPT_PRIORITY ); |
| |
| /* Restore the clobbered interrupt priority register to its original |
| value. */ |
| *pucFirstUserPriorityRegister = ucOriginalPriority; |
| } |
| #endif /* configASSERT_DEFINED */ |
| |
| |
| /* Only continue if the CPU is not in User mode. The CPU must be in a |
| Privileged mode for the scheduler to start. */ |
| __asm volatile ( "MRS %0, APSR" : "=r" ( ulAPSR ) :: "memory" ); |
| ulAPSR &= portAPSR_MODE_BITS_MASK; |
| configASSERT( ulAPSR != portAPSR_USER_MODE ); |
| |
| if( ulAPSR != portAPSR_USER_MODE ) |
| { |
| /* Only continue if the binary point value is set to its lowest possible |
| setting. See the comments in vPortValidateInterruptPriority() below for |
| more information. */ |
| configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE ); |
| |
| if( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE ) |
| { |
| /* Interrupts are turned off in the CPU itself to ensure tick does |
| not execute while the scheduler is being started. Interrupts are |
| automatically turned back on in the CPU when the first task starts |
| executing. */ |
| portCPU_IRQ_DISABLE(); |
| |
| /* Start the timer that generates the tick ISR. */ |
| configSETUP_TICK_INTERRUPT(); |
| |
| /* Start the first task executing. */ |
| vPortRestoreTaskContext(); |
| } |
| } |
| |
| /* Will only get here if vTaskStartScheduler() was called with the CPU in |
| a non-privileged mode or the binary point register was not set to its lowest |
| possible value. prvTaskExitError() is referenced to prevent a compiler |
| warning about it being defined but not referenced in the case that the user |
| defines their own exit address. */ |
| ( void ) prvTaskExitError; |
| return 0; |
| } |
| /*-----------------------------------------------------------*/ |
| |
| void vPortEndScheduler( void ) |
| { |
| /* Not implemented in ports where there is nothing to return to. |
| Artificially force an assert. */ |
| configASSERT( ulCriticalNesting == 1000UL ); |
| } |
| /*-----------------------------------------------------------*/ |
| |
| void vPortEnterCritical( void ) |
| { |
| /* Mask interrupts up to the max syscall interrupt priority. */ |
| ulPortSetInterruptMask(); |
| |
| /* Now interrupts are disabled ulCriticalNesting can be accessed |
| directly. Increment ulCriticalNesting to keep a count of how many times |
| portENTER_CRITICAL() has been called. */ |
| ulCriticalNesting++; |
| |
| /* This is not the interrupt safe version of the enter critical function so |
| assert() if it is being called from an interrupt context. Only API |
| functions that end in "FromISR" can be used in an interrupt. Only assert if |
| the critical nesting count is 1 to protect against recursive calls if the |
| assert function also uses a critical section. */ |
| if( ulCriticalNesting == 1 ) |
| { |
| configASSERT( ulPortInterruptNesting == 0 ); |
| } |
| } |
| /*-----------------------------------------------------------*/ |
| |
| void vPortExitCritical( void ) |
| { |
| if( ulCriticalNesting > portNO_CRITICAL_NESTING ) |
| { |
| /* Decrement the nesting count as the critical section is being |
| exited. */ |
| ulCriticalNesting--; |
| |
| /* If the nesting level has reached zero then all interrupt |
| priorities must be re-enabled. */ |
| if( ulCriticalNesting == portNO_CRITICAL_NESTING ) |
| { |
| /* Critical nesting has reached zero so all interrupt priorities |
| should be unmasked. */ |
| portCLEAR_INTERRUPT_MASK(); |
| } |
| } |
| } |
| /*-----------------------------------------------------------*/ |
| |
| void FreeRTOS_Tick_Handler( void ) |
| { |
| /* Set interrupt mask before altering scheduler structures. The tick |
| handler runs at the lowest priority, so interrupts cannot already be masked, |
| so there is no need to save and restore the current mask value. It is |
| necessary to turn off interrupts in the CPU itself while the ICCPMR is being |
| updated. */ |
| portCPU_IRQ_DISABLE(); |
| portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ); |
| __asm volatile ( "dsb \n" |
| "isb \n" ::: "memory" ); |
| portCPU_IRQ_ENABLE(); |
| |
| /* Increment the RTOS tick. */ |
| if( xTaskIncrementTick() != pdFALSE ) |
| { |
| ulPortYieldRequired = pdTRUE; |
| } |
| |
| /* Ensure all interrupt priorities are active again. */ |
| portCLEAR_INTERRUPT_MASK(); |
| configCLEAR_TICK_INTERRUPT(); |
| } |
| /*-----------------------------------------------------------*/ |
| |
| #if( configUSE_TASK_FPU_SUPPORT != 2 ) |
| |
| void vPortTaskUsesFPU( void ) |
| { |
| uint32_t ulInitialFPSCR = 0; |
| |
| /* A task is registering the fact that it needs an FPU context. Set the |
| FPU flag (which is saved as part of the task context). */ |
| ulPortTaskHasFPUContext = pdTRUE; |
| |
| /* Initialise the floating point status register. */ |
| __asm volatile ( "FMXR FPSCR, %0" :: "r" (ulInitialFPSCR) : "memory" ); |
| } |
| |
| #endif /* configUSE_TASK_FPU_SUPPORT */ |
| /*-----------------------------------------------------------*/ |
| |
| void vPortClearInterruptMask( uint32_t ulNewMaskValue ) |
| { |
| if( ulNewMaskValue == pdFALSE ) |
| { |
| portCLEAR_INTERRUPT_MASK(); |
| } |
| } |
| /*-----------------------------------------------------------*/ |
| |
| uint32_t ulPortSetInterruptMask( void ) |
| { |
| uint32_t ulReturn; |
| |
| /* Interrupt in the CPU must be turned off while the ICCPMR is being |
| updated. */ |
| portCPU_IRQ_DISABLE(); |
| if( portICCPMR_PRIORITY_MASK_REGISTER == ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) ) |
| { |
| /* Interrupts were already masked. */ |
| ulReturn = pdTRUE; |
| } |
| else |
| { |
| ulReturn = pdFALSE; |
| portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ); |
| __asm volatile ( "dsb \n" |
| "isb \n" ::: "memory" ); |
| } |
| portCPU_IRQ_ENABLE(); |
| |
| return ulReturn; |
| } |
| /*-----------------------------------------------------------*/ |
| |
| #if( configASSERT_DEFINED == 1 ) |
| |
| void vPortValidateInterruptPriority( void ) |
| { |
| /* The following assertion will fail if a service routine (ISR) for |
| an interrupt that has been assigned a priority above |
| configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API |
| function. ISR safe FreeRTOS API functions must *only* be called |
| from interrupts that have been assigned a priority at or below |
| configMAX_SYSCALL_INTERRUPT_PRIORITY. |
| |
| Numerically low interrupt priority numbers represent logically high |
| interrupt priorities, therefore the priority of the interrupt must |
| be set to a value equal to or numerically *higher* than |
| configMAX_SYSCALL_INTERRUPT_PRIORITY. |
| |
| FreeRTOS maintains separate thread and ISR API functions to ensure |
| interrupt entry is as fast and simple as possible. */ |
| configASSERT( portICCRPR_RUNNING_PRIORITY_REGISTER >= ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) ); |
| |
| /* Priority grouping: The interrupt controller (GIC) allows the bits |
| that define each interrupt's priority to be split between bits that |
| define the interrupt's pre-emption priority bits and bits that define |
| the interrupt's sub-priority. For simplicity all bits must be defined |
| to be pre-emption priority bits. The following assertion will fail if |
| this is not the case (if some bits represent a sub-priority). |
| |
| The priority grouping is configured by the GIC's binary point register |
| (ICCBPR). Writting 0 to ICCBPR will ensure it is set to its lowest |
| possible value (which may be above 0). */ |
| configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE ); |
| } |
| |
| #endif /* configASSERT_DEFINED */ |
| /*-----------------------------------------------------------*/ |
| |
| void vApplicationFPUSafeIRQHandler( uint32_t ulICCIAR ) |
| { |
| ( void ) ulICCIAR; |
| configASSERT( ( volatile void * ) NULL ); |
| } |