//***************************************************************************** | |
// | |
// hw_uart.h - Macros and defines used when accessing the UART hardware | |
// | |
// Copyright (c) 2005-2008 Luminary Micro, Inc. All rights reserved. | |
// | |
// Software License Agreement | |
// | |
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and | |
// exclusively on LMI's microcontroller products. | |
// | |
// The software is owned by LMI and/or its suppliers, and is protected under | |
// applicable copyright laws. All rights are reserved. You may not combine | |
// this software with "viral" open-source software in order to form a larger | |
// program. Any use in violation of the foregoing restrictions may subject | |
// the user to criminal sanctions under applicable laws, as well as to civil | |
// liability for the breach of the terms and conditions of this license. | |
// | |
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED | |
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF | |
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. | |
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR | |
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. | |
// | |
// This is part of revision 2523 of the Stellaris Peripheral Driver Library. | |
// | |
//***************************************************************************** | |
#ifndef __HW_UART_H__ | |
#define __HW_UART_H__ | |
//***************************************************************************** | |
// | |
// The following are defines for the UART Register offsets. | |
// | |
//***************************************************************************** | |
#define UART_O_DR 0x00000000 // Data Register | |
#define UART_O_RSR 0x00000004 // Receive Status Register (read) | |
#define UART_O_ECR 0x00000004 // Error Clear Register (write) | |
#define UART_O_FR 0x00000018 // Flag Register (read only) | |
#define UART_O_ILPR 0x00000020 // UART IrDA Low-Power Register | |
#define UART_O_IBRD 0x00000024 // Integer Baud Rate Divisor Reg | |
#define UART_O_FBRD 0x00000028 // Fractional Baud Rate Divisor Reg | |
#define UART_O_LCRH 0x0000002C // UART Line Control | |
#define UART_O_CTL 0x00000030 // Control Register | |
#define UART_O_IFLS 0x00000034 // Interrupt FIFO Level Select Reg | |
#define UART_O_IM 0x00000038 // Interrupt Mask Set/Clear Reg | |
#define UART_O_RIS 0x0000003C // Raw Interrupt Status Register | |
#define UART_O_MIS 0x00000040 // Masked Interrupt Status Register | |
#define UART_O_ICR 0x00000044 // Interrupt Clear Register | |
#define UART_O_DMACTL 0x00000048 // UART DMA Control | |
//***************************************************************************** | |
// | |
// The following are defines for the Data Register bits | |
// | |
//***************************************************************************** | |
#define UART_DR_OE 0x00000800 // Overrun Error | |
#define UART_DR_BE 0x00000400 // Break Error | |
#define UART_DR_PE 0x00000200 // Parity Error | |
#define UART_DR_FE 0x00000100 // Framing Error | |
#define UART_DR_DATA_M 0x000000FF // Data Transmitted or Received. | |
#define UART_DR_DATA_S 0 | |
//***************************************************************************** | |
// | |
// The following are defines for the Receive Status Register bits | |
// | |
//***************************************************************************** | |
#define UART_RSR_OE 0x00000008 // Overrun Error | |
#define UART_RSR_BE 0x00000004 // Break Error | |
#define UART_RSR_PE 0x00000002 // Parity Error | |
#define UART_RSR_FE 0x00000001 // Framing Error | |
//***************************************************************************** | |
// | |
// The following are defines for the Flag Register bits | |
// | |
//***************************************************************************** | |
#define UART_FR_TXFE 0x00000080 // TX FIFO Empty | |
#define UART_FR_RXFF 0x00000040 // RX FIFO Full | |
#define UART_FR_TXFF 0x00000020 // TX FIFO Full | |
#define UART_FR_RXFE 0x00000010 // RX FIFO Empty | |
#define UART_FR_BUSY 0x00000008 // UART Busy | |
//***************************************************************************** | |
// | |
// The following are defines for the Integer baud-rate divisor | |
// | |
//***************************************************************************** | |
#define UART_IBRD_DIVINT_M 0x0000FFFF // Integer Baud-Rate Divisor. | |
#define UART_IBRD_DIVINT_S 0 | |
//***************************************************************************** | |
// | |
// The following are defines for the Fractional baud-rate divisor | |
// | |
//***************************************************************************** | |
#define UART_FBRD_DIVFRAC_M 0x0000003F // Fractional Baud-Rate Divisor. | |
#define UART_FBRD_DIVFRAC_S 0 | |
//***************************************************************************** | |
// | |
// The following are defines for the Control Register bits | |
// | |
//***************************************************************************** | |
#define UART_CTL_RXE 0x00000200 // Receive Enable | |
#define UART_CTL_TXE 0x00000100 // Transmit Enable | |
#define UART_CTL_LBE 0x00000080 // Loopback Enable | |
#define UART_CTL_SIRLP 0x00000004 // SIR (IrDA) Low Power Enable | |
#define UART_CTL_SIREN 0x00000002 // SIR (IrDA) Enable | |
#define UART_CTL_UARTEN 0x00000001 // UART Enable | |
//***************************************************************************** | |
// | |
// The following are defines for the Interrupt FIFO Level Select Register bits | |
// | |
//***************************************************************************** | |
#define UART_IFLS_RX_M 0x00000038 // RX FIFO Level Interrupt Mask | |
#define UART_IFLS_RX1_8 0x00000000 // 1/8 Full | |
#define UART_IFLS_RX2_8 0x00000008 // 1/4 Full | |
#define UART_IFLS_RX4_8 0x00000010 // 1/2 Full | |
#define UART_IFLS_RX6_8 0x00000018 // 3/4 Full | |
#define UART_IFLS_RX7_8 0x00000020 // 7/8 Full | |
#define UART_IFLS_TX_M 0x00000007 // TX FIFO Level Interrupt Mask | |
#define UART_IFLS_TX1_8 0x00000000 // 1/8 Full | |
#define UART_IFLS_TX2_8 0x00000001 // 1/4 Full | |
#define UART_IFLS_TX4_8 0x00000002 // 1/2 Full | |
#define UART_IFLS_TX6_8 0x00000003 // 3/4 Full | |
#define UART_IFLS_TX7_8 0x00000004 // 7/8 Full | |
//***************************************************************************** | |
// | |
// The following are defines for the Interrupt Mask Set/Clear Register bits | |
// | |
//***************************************************************************** | |
#define UART_IM_OEIM 0x00000400 // Overrun Error Interrupt Mask | |
#define UART_IM_BEIM 0x00000200 // Break Error Interrupt Mask | |
#define UART_IM_PEIM 0x00000100 // Parity Error Interrupt Mask | |
#define UART_IM_FEIM 0x00000080 // Framing Error Interrupt Mask | |
#define UART_IM_RTIM 0x00000040 // Receive Timeout Interrupt Mask | |
#define UART_IM_TXIM 0x00000020 // Transmit Interrupt Mask | |
#define UART_IM_RXIM 0x00000010 // Receive Interrupt Mask | |
//***************************************************************************** | |
// | |
// The following are defines for the Raw Interrupt Status Register | |
// | |
//***************************************************************************** | |
#define UART_RIS_OERIS 0x00000400 // Overrun Error Interrupt Status | |
#define UART_RIS_BERIS 0x00000200 // Break Error Interrupt Status | |
#define UART_RIS_PERIS 0x00000100 // Parity Error Interrupt Status | |
#define UART_RIS_FERIS 0x00000080 // Framing Error Interrupt Status | |
#define UART_RIS_RTRIS 0x00000040 // Receive Timeout Interrupt Status | |
#define UART_RIS_TXRIS 0x00000020 // Transmit Interrupt Status | |
#define UART_RIS_RXRIS 0x00000010 // Receive Interrupt Status | |
//***************************************************************************** | |
// | |
// The following are defines for the Masked Interrupt Status Register | |
// | |
//***************************************************************************** | |
#define UART_MIS_OEMIS 0x00000400 // Overrun Error Interrupt Status | |
#define UART_MIS_BEMIS 0x00000200 // Break Error Interrupt Status | |
#define UART_MIS_PEMIS 0x00000100 // Parity Error Interrupt Status | |
#define UART_MIS_FEMIS 0x00000080 // Framing Error Interrupt Status | |
#define UART_MIS_RTMIS 0x00000040 // Receive Timeout Interrupt Status | |
#define UART_MIS_TXMIS 0x00000020 // Transmit Interrupt Status | |
#define UART_MIS_RXMIS 0x00000010 // Receive Interrupt Status | |
//***************************************************************************** | |
// | |
// The following are defines for the Interrupt Clear Register bits | |
// | |
//***************************************************************************** | |
#define UART_ICR_OEIC 0x00000400 // Overrun Error Interrupt Clear | |
#define UART_ICR_BEIC 0x00000200 // Break Error Interrupt Clear | |
#define UART_ICR_PEIC 0x00000100 // Parity Error Interrupt Clear | |
#define UART_ICR_FEIC 0x00000080 // Framing Error Interrupt Clear | |
#define UART_ICR_RTIC 0x00000040 // Receive Timeout Interrupt Clear | |
#define UART_ICR_TXIC 0x00000020 // Transmit Interrupt Clear | |
#define UART_ICR_RXIC 0x00000010 // Receive Interrupt Clear | |
//***************************************************************************** | |
// | |
// The following are defines for the bit fields in the UART_O_ECR register. | |
// | |
//***************************************************************************** | |
#define UART_ECR_DATA_M 0x000000FF // Error Clear. | |
#define UART_ECR_DATA_S 0 | |
//***************************************************************************** | |
// | |
// The following are defines for the bit fields in the UART_O_LCRH register. | |
// | |
//***************************************************************************** | |
#define UART_LCRH_SPS 0x00000080 // UART Stick Parity Select. | |
#define UART_LCRH_WLEN_M 0x00000060 // UART Word Length. | |
#define UART_LCRH_WLEN_5 0x00000000 // 5 bits (default) | |
#define UART_LCRH_WLEN_6 0x00000020 // 6 bits | |
#define UART_LCRH_WLEN_7 0x00000040 // 7 bits | |
#define UART_LCRH_WLEN_8 0x00000060 // 8 bits | |
#define UART_LCRH_FEN 0x00000010 // UART Enable FIFOs. | |
#define UART_LCRH_STP2 0x00000008 // UART Two Stop Bits Select. | |
#define UART_LCRH_EPS 0x00000004 // UART Even Parity Select. | |
#define UART_LCRH_PEN 0x00000002 // UART Parity Enable. | |
#define UART_LCRH_BRK 0x00000001 // UART Send Break. | |
//***************************************************************************** | |
// | |
// The following are defines for the bit fields in the UART_O_ILPR register. | |
// | |
//***************************************************************************** | |
#define UART_ILPR_ILPDVSR_M 0x000000FF // IrDA Low-Power Divisor. | |
#define UART_ILPR_ILPDVSR_S 0 | |
//***************************************************************************** | |
// | |
// The following are defines for the bit fields in the UART_O_DMACTL register. | |
// | |
//***************************************************************************** | |
#define UART_DMACTL_DMAERR 0x00000004 // DMA on Error. | |
#define UART_DMACTL_TXDMAE 0x00000002 // Transmit DMA Enable. | |
#define UART_DMACTL_RXDMAE 0x00000001 // Receive DMA Enable. | |
//***************************************************************************** | |
// | |
// The following definitions are deprecated. | |
// | |
//***************************************************************************** | |
#ifndef DEPRECATED | |
//***************************************************************************** | |
// | |
// The following are deprecated defines for the UART Register offsets. | |
// | |
//***************************************************************************** | |
#define UART_O_LCR_H 0x0000002C // Line Control Register, HIGH byte | |
#define UART_O_PeriphID4 0x00000FD0 | |
#define UART_O_PeriphID5 0x00000FD4 | |
#define UART_O_PeriphID6 0x00000FD8 | |
#define UART_O_PeriphID7 0x00000FDC | |
#define UART_O_PeriphID0 0x00000FE0 | |
#define UART_O_PeriphID1 0x00000FE4 | |
#define UART_O_PeriphID2 0x00000FE8 | |
#define UART_O_PeriphID3 0x00000FEC | |
#define UART_O_PCellID0 0x00000FF0 | |
#define UART_O_PCellID1 0x00000FF4 | |
#define UART_O_PCellID2 0x00000FF8 | |
#define UART_O_PCellID3 0x00000FFC | |
//***************************************************************************** | |
// | |
// The following are deprecated defines for the Data Register bits | |
// | |
//***************************************************************************** | |
#define UART_DR_DATA_MASK 0x000000FF // UART data | |
//***************************************************************************** | |
// | |
// The following are deprecated defines for the Integer baud-rate divisor | |
// | |
//***************************************************************************** | |
#define UART_IBRD_DIVINT_MASK 0x0000FFFF // Integer baud-rate divisor | |
//***************************************************************************** | |
// | |
// The following are deprecated defines for the Fractional baud-rate divisor | |
// | |
//***************************************************************************** | |
#define UART_FBRD_DIVFRAC_MASK 0x0000003F // Fractional baud-rate divisor | |
//***************************************************************************** | |
// | |
// The following are deprecated defines for the Line Control Register High bits | |
// | |
//***************************************************************************** | |
#define UART_LCR_H_SPS 0x00000080 // Stick Parity Select | |
#define UART_LCR_H_WLEN 0x00000060 // Word length | |
#define UART_LCR_H_WLEN_5 0x00000000 // 5 bit data | |
#define UART_LCR_H_WLEN_6 0x00000020 // 6 bit data | |
#define UART_LCR_H_WLEN_7 0x00000040 // 7 bit data | |
#define UART_LCR_H_WLEN_8 0x00000060 // 8 bit data | |
#define UART_LCR_H_FEN 0x00000010 // Enable FIFO | |
#define UART_LCR_H_STP2 0x00000008 // Two Stop Bits Select | |
#define UART_LCR_H_EPS 0x00000004 // Even Parity Select | |
#define UART_LCR_H_PEN 0x00000002 // Parity Enable | |
#define UART_LCR_H_BRK 0x00000001 // Send Break | |
//***************************************************************************** | |
// | |
// The following are deprecated defines for the Interrupt FIFO Level Select | |
// Register bits | |
// | |
//***************************************************************************** | |
#define UART_IFLS_RX_MASK 0x00000038 // RX FIFO level mask | |
#define UART_IFLS_TX_MASK 0x00000007 // TX FIFO level mask | |
//***************************************************************************** | |
// | |
// The following are deprecated defines for the Interrupt Clear Register bits | |
// | |
//***************************************************************************** | |
#define UART_RSR_ANY (UART_RSR_OE | UART_RSR_BE | UART_RSR_PE | \ | |
UART_RSR_FE) | |
//***************************************************************************** | |
// | |
// The following are deprecated defines for the Reset Values for UART | |
// Registers. | |
// | |
//***************************************************************************** | |
#define UART_RV_CTL 0x00000300 | |
#define UART_RV_PCellID1 0x000000F0 | |
#define UART_RV_PCellID3 0x000000B1 | |
#define UART_RV_FR 0x00000090 | |
#define UART_RV_PeriphID2 0x00000018 | |
#define UART_RV_IFLS 0x00000012 | |
#define UART_RV_PeriphID0 0x00000011 | |
#define UART_RV_PCellID0 0x0000000D | |
#define UART_RV_PCellID2 0x00000005 | |
#define UART_RV_PeriphID3 0x00000001 | |
#define UART_RV_PeriphID4 0x00000000 | |
#define UART_RV_LCR_H 0x00000000 | |
#define UART_RV_PeriphID6 0x00000000 | |
#define UART_RV_DR 0x00000000 | |
#define UART_RV_RSR 0x00000000 | |
#define UART_RV_ECR 0x00000000 | |
#define UART_RV_PeriphID5 0x00000000 | |
#define UART_RV_RIS 0x00000000 | |
#define UART_RV_FBRD 0x00000000 | |
#define UART_RV_IM 0x00000000 | |
#define UART_RV_MIS 0x00000000 | |
#define UART_RV_ICR 0x00000000 | |
#define UART_RV_PeriphID1 0x00000000 | |
#define UART_RV_PeriphID7 0x00000000 | |
#define UART_RV_IBRD 0x00000000 | |
#endif | |
#endif // __HW_UART_H__ |