blob: bdf91981d08470ffac3fc0365b2de1320790100b [file] [log] [blame]
/*
FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
***************************************************************************
* *
* If you are: *
* *
* + New to FreeRTOS, *
* + Wanting to learn FreeRTOS or multitasking in general quickly *
* + Looking for basic training, *
* + Wanting to improve your FreeRTOS skills and productivity *
* *
* then take a look at the FreeRTOS eBook *
* *
* "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
* http://www.FreeRTOS.org/Documentation *
* *
* A pdf reference manual is also available. Both are usually delivered *
* to your inbox within 20 minutes to two hours when purchased between 8am *
* and 8pm GMT (although please allow up to 24 hours in case of *
* exceptional circumstances). Thank you for your support! *
* *
***************************************************************************
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
***NOTE*** The exception to the GPL is included to allow you to distribute
a combined work that includes FreeRTOS without being obliged to provide the
source code for proprietary components outside of the FreeRTOS kernel.
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details. You should have received a copy of the GNU General Public
License and the FreeRTOS license exception along with FreeRTOS; if not it
can be viewed here: http://www.freertos.org/a00114.html and also obtained
by writing to Richard Barry, contact details for whom are available on the
FreeRTOS WEB site.
1 tab == 4 spaces!
http://www.FreeRTOS.org - Documentation, latest information, license and
contact details.
http://www.SafeRTOS.com - A version that is certified for use in safety
critical systems.
http://www.OpenRTOS.com - Commercial support, development, porting,
licensing and training services.
*/
/*
* Tests the behaviour when data is peeked from a queue when there are
* multiple tasks blocked on the queue.
*/
#include <stdlib.h>
/* Scheduler include files. */
#include "FreeRTOS.h"
#include "task.h"
#include "queue.h"
#include "semphr.h"
/* Demo program include files. */
#include "QPeek.h"
#define qpeekQUEUE_LENGTH ( 5 )
#define qpeekNO_BLOCK ( 0 )
#define qpeekSHORT_DELAY ( 10 )
#define qpeekLOW_PRIORITY ( tskIDLE_PRIORITY + 0 )
#define qpeekMEDIUM_PRIORITY ( tskIDLE_PRIORITY + 1 )
#define qpeekHIGH_PRIORITY ( tskIDLE_PRIORITY + 2 )
#define qpeekHIGHEST_PRIORITY ( tskIDLE_PRIORITY + 3 )
/*-----------------------------------------------------------*/
/*
* The following three tasks are used to demonstrate the peeking behaviour.
* Each task is given a different priority to demonstrate the order in which
* tasks are woken as data is peeked from a queue.
*/
static void prvLowPriorityPeekTask( void *pvParameters );
static void prvMediumPriorityPeekTask( void *pvParameters );
static void prvHighPriorityPeekTask( void *pvParameters );
static void prvHighestPriorityPeekTask( void *pvParameters );
/*-----------------------------------------------------------*/
/* Flag that will be latched to pdTRUE should any unexpected behaviour be
detected in any of the tasks. */
static volatile portBASE_TYPE xErrorDetected = pdFALSE;
/* Counter that is incremented on each cycle of a test. This is used to
detect a stalled task - a test that is no longer running. */
static volatile unsigned portLONG ulLoopCounter = 0;
/* Handles to the test tasks. */
xTaskHandle xMediumPriorityTask, xHighPriorityTask, xHighestPriorityTask;
/*-----------------------------------------------------------*/
void vStartQueuePeekTasks( void )
{
xQueueHandle xQueue;
/* Create the queue that we are going to use for the test/demo. */
xQueue = xQueueCreate( qpeekQUEUE_LENGTH, sizeof( unsigned portLONG ) );
/* vQueueAddToRegistry() adds the queue to the queue registry, if one is
in use. The queue registry is provided as a means for kernel aware
debuggers to locate queues and has no purpose if a kernel aware debugger
is not being used. The call to vQueueAddToRegistry() will be removed
by the pre-processor if configQUEUE_REGISTRY_SIZE is not defined or is
defined to be less than 1. */
vQueueAddToRegistry( xQueue, ( signed portCHAR * ) "QPeek_Test_Queue" );
/* Create the demo tasks and pass it the queue just created. We are
passing the queue handle by value so it does not matter that it is declared
on the stack here. */
xTaskCreate( prvLowPriorityPeekTask, ( signed portCHAR * )"PeekL", configMINIMAL_STACK_SIZE, ( void * ) xQueue, qpeekLOW_PRIORITY, NULL );
xTaskCreate( prvMediumPriorityPeekTask, ( signed portCHAR * )"PeekM", configMINIMAL_STACK_SIZE, ( void * ) xQueue, qpeekMEDIUM_PRIORITY, &xMediumPriorityTask );
xTaskCreate( prvHighPriorityPeekTask, ( signed portCHAR * )"PeekH1", configMINIMAL_STACK_SIZE, ( void * ) xQueue, qpeekHIGH_PRIORITY, &xHighPriorityTask );
xTaskCreate( prvHighestPriorityPeekTask, ( signed portCHAR * )"PeekH2", configMINIMAL_STACK_SIZE, ( void * ) xQueue, qpeekHIGHEST_PRIORITY, &xHighestPriorityTask );
}
/*-----------------------------------------------------------*/
static void prvHighestPriorityPeekTask( void *pvParameters )
{
xQueueHandle xQueue = ( xQueueHandle ) pvParameters;
unsigned portLONG ulValue;
#ifdef USE_STDIO
{
void vPrintDisplayMessage( const portCHAR * const * ppcMessageToSend );
const portCHAR * const pcTaskStartMsg = "Queue peek test started.\r\n";
/* Queue a message for printing to say the task has started. */
vPrintDisplayMessage( &pcTaskStartMsg );
}
#endif
for( ;; )
{
/* Try peeking from the queue. The queue should be empty so we will
block, allowing the high priority task to execute. */
if( xQueuePeek( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
{
/* We expected to have received something by the time we unblock. */
xErrorDetected = pdTRUE;
}
/* When we reach here the high and medium priority tasks should still
be blocked on the queue. We unblocked because the low priority task
wrote a value to the queue, which we should have peeked. Peeking the
data (rather than receiving it) will leave the data on the queue, so
the high priority task should then have also been unblocked, but not
yet executed. */
if( ulValue != 0x11223344 )
{
/* We did not receive the expected value. */
xErrorDetected = pdTRUE;
}
if( uxQueueMessagesWaiting( xQueue ) != 1 )
{
/* The message should have been left on the queue. */
xErrorDetected = pdTRUE;
}
/* Now we are going to actually receive the data, so when the high
priority task runs it will find the queue empty and return to the
blocked state. */
ulValue = 0;
if( xQueueReceive( xQueue, &ulValue, qpeekNO_BLOCK ) != pdPASS )
{
/* We expected to receive the value. */
xErrorDetected = pdTRUE;
}
if( ulValue != 0x11223344 )
{
/* We did not receive the expected value - which should have been
the same value as was peeked. */
xErrorDetected = pdTRUE;
}
/* Now we will block again as the queue is once more empty. The low
priority task can then execute again. */
if( xQueuePeek( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
{
/* We expected to have received something by the time we unblock. */
xErrorDetected = pdTRUE;
}
/* When we get here the low priority task should have again written to the
queue. */
if( ulValue != 0x01234567 )
{
/* We did not receive the expected value. */
xErrorDetected = pdTRUE;
}
if( uxQueueMessagesWaiting( xQueue ) != 1 )
{
/* The message should have been left on the queue. */
xErrorDetected = pdTRUE;
}
/* We only peeked the data, so suspending ourselves now should enable
the high priority task to also peek the data. The high priority task
will have been unblocked when we peeked the data as we left the data
in the queue. */
vTaskSuspend( NULL );
/* This time we are going to do the same as the above test, but the
high priority task is going to receive the data, rather than peek it.
This means that the medium priority task should never peek the value. */
if( xQueuePeek( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
{
xErrorDetected = pdTRUE;
}
if( ulValue != 0xaabbaabb )
{
xErrorDetected = pdTRUE;
}
vTaskSuspend( NULL );
}
}
/*-----------------------------------------------------------*/
static void prvHighPriorityPeekTask( void *pvParameters )
{
xQueueHandle xQueue = ( xQueueHandle ) pvParameters;
unsigned portLONG ulValue;
for( ;; )
{
/* Try peeking from the queue. The queue should be empty so we will
block, allowing the medium priority task to execute. Both the high
and highest priority tasks will then be blocked on the queue. */
if( xQueuePeek( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
{
/* We expected to have received something by the time we unblock. */
xErrorDetected = pdTRUE;
}
/* When we get here the highest priority task should have peeked the data
(unblocking this task) then suspended (allowing this task to also peek
the data). */
if( ulValue != 0x01234567 )
{
/* We did not receive the expected value. */
xErrorDetected = pdTRUE;
}
if( uxQueueMessagesWaiting( xQueue ) != 1 )
{
/* The message should have been left on the queue. */
xErrorDetected = pdTRUE;
}
/* We only peeked the data, so suspending ourselves now should enable
the medium priority task to also peek the data. The medium priority task
will have been unblocked when we peeked the data as we left the data
in the queue. */
vTaskSuspend( NULL );
/* This time we are going actually receive the value, so the medium
priority task will never peek the data - we removed it from the queue. */
if( xQueueReceive( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
{
xErrorDetected = pdTRUE;
}
if( ulValue != 0xaabbaabb )
{
xErrorDetected = pdTRUE;
}
vTaskSuspend( NULL );
}
}
/*-----------------------------------------------------------*/
static void prvMediumPriorityPeekTask( void *pvParameters )
{
xQueueHandle xQueue = ( xQueueHandle ) pvParameters;
unsigned portLONG ulValue;
for( ;; )
{
/* Try peeking from the queue. The queue should be empty so we will
block, allowing the low priority task to execute. The highest, high
and medium priority tasks will then all be blocked on the queue. */
if( xQueuePeek( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
{
/* We expected to have received something by the time we unblock. */
xErrorDetected = pdTRUE;
}
/* When we get here the high priority task should have peeked the data
(unblocking this task) then suspended (allowing this task to also peek
the data). */
if( ulValue != 0x01234567 )
{
/* We did not receive the expected value. */
xErrorDetected = pdTRUE;
}
if( uxQueueMessagesWaiting( xQueue ) != 1 )
{
/* The message should have been left on the queue. */
xErrorDetected = pdTRUE;
}
/* Just so we know the test is still running. */
ulLoopCounter++;
/* Now we can suspend ourselves so the low priority task can execute
again. */
vTaskSuspend( NULL );
}
}
/*-----------------------------------------------------------*/
static void prvLowPriorityPeekTask( void *pvParameters )
{
xQueueHandle xQueue = ( xQueueHandle ) pvParameters;
unsigned portLONG ulValue;
for( ;; )
{
/* Write some data to the queue. This should unblock the highest
priority task that is waiting to peek data from the queue. */
ulValue = 0x11223344;
if( xQueueSendToBack( xQueue, &ulValue, qpeekNO_BLOCK ) != pdPASS )
{
/* We were expecting the queue to be empty so we should not of
had a problem writing to the queue. */
xErrorDetected = pdTRUE;
}
/* By the time we get here the data should have been removed from
the queue. */
if( uxQueueMessagesWaiting( xQueue ) != 0 )
{
xErrorDetected = pdTRUE;
}
/* Write another value to the queue, again waking the highest priority
task that is blocked on the queue. */
ulValue = 0x01234567;
if( xQueueSendToBack( xQueue, &ulValue, qpeekNO_BLOCK ) != pdPASS )
{
/* We were expecting the queue to be empty so we should not of
had a problem writing to the queue. */
xErrorDetected = pdTRUE;
}
/* All the other tasks should now have successfully peeked the data.
The data is still in the queue so we should be able to receive it. */
ulValue = 0;
if( xQueueReceive( xQueue, &ulValue, qpeekNO_BLOCK ) != pdPASS )
{
/* We expected to receive the data. */
xErrorDetected = pdTRUE;
}
if( ulValue != 0x01234567 )
{
/* We did not receive the expected value. */
}
/* Lets just delay a while as this is an intensive test as we don't
want to starve other tests of processing time. */
vTaskDelay( qpeekSHORT_DELAY );
/* Unsuspend the other tasks so we can repeat the test - this time
however not all the other tasks will peek the data as the high
priority task is actually going to remove it from the queue. Send
to front is used just to be different. As the queue is empty it
makes no difference to the result. */
vTaskResume( xMediumPriorityTask );
vTaskResume( xHighPriorityTask );
vTaskResume( xHighestPriorityTask );
ulValue = 0xaabbaabb;
if( xQueueSendToFront( xQueue, &ulValue, qpeekNO_BLOCK ) != pdPASS )
{
/* We were expecting the queue to be empty so we should not of
had a problem writing to the queue. */
xErrorDetected = pdTRUE;
}
/* This time we should find that the queue is empty. The high priority
task actually removed the data rather than just peeking it. */
if( xQueuePeek( xQueue, &ulValue, qpeekNO_BLOCK ) != errQUEUE_EMPTY )
{
/* We expected to receive the data. */
xErrorDetected = pdTRUE;
}
/* Unsuspend the highest and high priority tasks so we can go back
and repeat the whole thing. The medium priority task should not be
suspended as it was not able to peek the data in this last case. */
vTaskResume( xHighPriorityTask );
vTaskResume( xHighestPriorityTask );
/* Lets just delay a while as this is an intensive test as we don't
want to starve other tests of processing time. */
vTaskDelay( qpeekSHORT_DELAY );
}
}
/*-----------------------------------------------------------*/
/* This is called to check that all the created tasks are still running. */
portBASE_TYPE xAreQueuePeekTasksStillRunning( void )
{
static unsigned portLONG ulLastLoopCounter = 0;
/* If the demo task is still running then we expect the loopcounter to
have incremented since this function was last called. */
if( ulLastLoopCounter == ulLoopCounter )
{
xErrorDetected = pdTRUE;
}
ulLastLoopCounter = ulLoopCounter;
/* Errors detected in the task itself will have latched xErrorDetected
to true. */
return !xErrorDetected;
}