| /* | |
| * FreeRTOS+TCP Labs Build 160919 (C) 2016 Real Time Engineers ltd. | |
| * Authors include Hein Tibosch and Richard Barry | |
| * | |
| ******************************************************************************* | |
| ***** NOTE ******* NOTE ******* NOTE ******* NOTE ******* NOTE ******* NOTE *** | |
| *** *** | |
| *** *** | |
| *** FREERTOS+TCP IS STILL IN THE LAB (mainly because the FTP and HTTP *** | |
| *** demos have a dependency on FreeRTOS+FAT, which is only in the Labs *** | |
| *** download): *** | |
| *** *** | |
| *** FreeRTOS+TCP is functional and has been used in commercial products *** | |
| *** for some time. Be aware however that we are still refining its *** | |
| *** design, the source code does not yet quite conform to the strict *** | |
| *** coding and style standards mandated by Real Time Engineers ltd., and *** | |
| *** the documentation and testing is not necessarily complete. *** | |
| *** *** | |
| *** PLEASE REPORT EXPERIENCES USING THE SUPPORT RESOURCES FOUND ON THE *** | |
| *** URL: http://www.FreeRTOS.org/contact Active early adopters may, at *** | |
| *** the sole discretion of Real Time Engineers Ltd., be offered versions *** | |
| *** under a license other than that described below. *** | |
| *** *** | |
| *** *** | |
| ***** NOTE ******* NOTE ******* NOTE ******* NOTE ******* NOTE ******* NOTE *** | |
| ******************************************************************************* | |
| * | |
| * FreeRTOS+TCP can be used under two different free open source licenses. The | |
| * license that applies is dependent on the processor on which FreeRTOS+TCP is | |
| * executed, as follows: | |
| * | |
| * If FreeRTOS+TCP is executed on one of the processors listed under the Special | |
| * License Arrangements heading of the FreeRTOS+TCP license information web | |
| * page, then it can be used under the terms of the FreeRTOS Open Source | |
| * License. If FreeRTOS+TCP is used on any other processor, then it can be used | |
| * under the terms of the GNU General Public License V2. Links to the relevant | |
| * licenses follow: | |
| * | |
| * The FreeRTOS+TCP License Information Page: http://www.FreeRTOS.org/tcp_license | |
| * The FreeRTOS Open Source License: http://www.FreeRTOS.org/license | |
| * The GNU General Public License Version 2: http://www.FreeRTOS.org/gpl-2.0.txt | |
| * | |
| * FreeRTOS+TCP is distributed in the hope that it will be useful. You cannot | |
| * use FreeRTOS+TCP unless you agree that you use the software 'as is'. | |
| * FreeRTOS+TCP is provided WITHOUT ANY WARRANTY; without even the implied | |
| * warranties of NON-INFRINGEMENT, MERCHANTABILITY or FITNESS FOR A PARTICULAR | |
| * PURPOSE. Real Time Engineers Ltd. disclaims all conditions and terms, be they | |
| * implied, expressed, or statutory. | |
| * | |
| * 1 tab == 4 spaces! | |
| * | |
| * http://www.FreeRTOS.org | |
| * http://www.FreeRTOS.org/plus | |
| * http://www.FreeRTOS.org/labs | |
| * | |
| */ | |
| #ifndef __FTPCMD_H__ | |
| #define __FTPCMD_H__ | |
| #define REPL_110 "110 Restart marker reply.\r\n" | |
| #define REPL_120 "120 Try again in 2 minutes.\r\n" | |
| #define REPL_125 "125 Data connection already open; transfer starting.\r\n" | |
| #define REPL_150 "150 File status okay; about to open data connection.\r\n" | |
| #define REPL_200 "200 NOOP command successful.\r\n" | |
| #define REPL_200_PROGRESS "200 NOOP: data transfer in progress.\r\n" | |
| #define REPL_202 "202 Command not implemented, superfluous at this site.\r\n" | |
| #define REPL_211 "221 System status, or system help reply.\r\n" | |
| #define REPL_211_STATUS "221-status of %s.\r\n" | |
| #define REPL_211_END "221 End of status.\r\n" | |
| #define REPL_212 "212 Directory status.\r\n" | |
| #define REPL_213 "213 File status.\r\n" | |
| #define REPL_214 "214 Help message.\r\n" | |
| #define REPL_214_END "214 End Help message.\r\n" | |
| #define REPL_215 "215 %s system type.\r\n" | |
| #define REPL_220 "220 Service ready for new user.\r\n" | |
| #define REPL_221 "221 Service closing control connection.\r\n" | |
| #define REPL_225 "225 Data connection open; no transfer in progress.\r\n" | |
| #define REPL_226 "226 Closing data connection.\r\n" | |
| #define REPL_227 "227 Entering Passive Mode (%s,%s,%s,%s,%s,%s).\r\n" | |
| #define REPL_227_D "227 Entering Passive Mode (%u,%u,%u,%u,%u,%u).\r\n" | |
| #define REPL_230 "230 User logged in, proceed.\r\n" | |
| #define REPL_250 "250 Requested file action okay, completed.\r\n" | |
| #define REPL_257 "257 %s created.\r\n" | |
| // #define REPL_257_PWD "257 \"%s\" is current working dir.\r\n" | |
| #define REPL_257_PWD "257 \"%s\"\r\n" | |
| #define REPL_331 "331 Only anonymous user is accepted.\r\n" | |
| #define REPL_331_ANON "331 Anonymous login okay\r\n" | |
| #define REPL_332 "332 Need account for login.\r\n" | |
| #define REPL_350 "350 Requested file action pending further information.\r\n" | |
| #define REPL_421 "421 Service not available, closing control connection.\r\n" | |
| #define REPL_425 "425 Can't open data connection.\r\n" | |
| #define REPL_426 "426 Connection closed; transfer aborted.\r\n" | |
| #define REPL_450 "450 Requested file action not taken.\r\n" | |
| #define REPL_451 "451 Requested action aborted. Local error in processing.\r\n" | |
| #define REPL_452 "452 Requested action not taken.\r\n" | |
| #define REPL_500 "500 Syntax error, command unrecognized.\r\n" | |
| #define REPL_501 "501 Syntax error in parameters or arguments.\r\n" | |
| #define REPL_502 "502 Command not implemented.\r\n" | |
| #define REPL_503 "503 Bad sequence of commands.\r\n" | |
| #define REPL_504 "504 Command not implemented for that parameter.\r\n" | |
| #define REPL_530 "530 Not logged in.\r\n" | |
| #define REPL_532 "532 Need account for storing files.\r\n" | |
| #define REPL_550 "550 Requested action not taken.\r\n" | |
| #define REPL_551 "551 Requested action aborted. Page type unknown.\r\n" | |
| #define REPL_552 "552 Requested file action aborted.\r\n" | |
| #define REPL_553 "553 Requested action not taken.\r\n" | |
| #define REPL_553_READ_ONLY "553 Read-only file-system.\r\n" | |
| enum EFTPCommand { | |
| ECMD_USER, | |
| ECMD_PASS, | |
| ECMD_ACCT, | |
| ECMD_CWD, | |
| ECMD_CDUP, | |
| ECMD_SMNT, | |
| ECMD_QUIT, | |
| ECMD_REIN, | |
| ECMD_PORT, | |
| ECMD_PASV, | |
| ECMD_TYPE, | |
| ECMD_STRU, | |
| ECMD_MODE, | |
| ECMD_RETR, | |
| ECMD_STOR, | |
| ECMD_STOU, | |
| ECMD_APPE, | |
| ECMD_ALLO, | |
| ECMD_REST, | |
| ECMD_RNFR, | |
| ECMD_RNTO, | |
| ECMD_ABOR, | |
| ECMD_SIZE, | |
| ECMD_MDTM, | |
| ECMD_DELE, | |
| ECMD_RMD, | |
| ECMD_MKD, | |
| ECMD_PWD, | |
| ECMD_LIST, | |
| ECMD_NLST, | |
| ECMD_SITE, | |
| ECMD_SYST, | |
| ECMD_FEAT, | |
| ECMD_STAT, | |
| ECMD_HELP, | |
| ECMD_NOOP, | |
| ECMD_EMPTY, | |
| ECMD_CLOSE, | |
| ECMD_UNKNOWN, | |
| }; | |
| typedef struct xFTP_COMMAND { | |
| BaseType_t xCommandLength; | |
| const char pcCommandName[7]; | |
| const unsigned char ucCommandType; | |
| const unsigned char checkLogin; | |
| const unsigned char checkNullArg; | |
| } FTPCommand_t; | |
| #define FTP_CMD_COUNT (ECMD_UNKNOWN+1) | |
| extern const FTPCommand_t xFTPCommands[ FTP_CMD_COUNT ]; | |
| #endif // __FTPCMD_H__ |