| Tracealyzer Trace Recorder Library | |
| ------------------------------------- | |
| Percepio AB | |
| www.percepio.com | |
| This directory contains the a generic trace recorder library for Tracealyzer v2.6. | |
| For information on how to upload the trace data from your target system RAM to | |
| Tracealyzer, see "debugger trace upload.txt" | |
| Files included | |
| -------------- | |
| - trcConfig.h - The recorder's configuration file, set your recorder configuration here! | |
| - trcUser.c/.h - The main API towards the application (trcUser.h in the only include necessary). | |
| - trcKernel.c/.h - Internal routines for storing kernel events. | |
| - trcBase.c/.h - Internal routines for manipulating the data structures and calculating timestamps. | |
| - trcHardwarePort.c/.h - The hardware interface, especially for timestamping. | |
| - trcKernelPort.c/.h - Kernel specific implementations of macros and data. | |
| - trcKernelHooks.h - The trace macro defines (OS independent). | |
| - trcTypes.h - Type definitions used. | |
| Hardware Timer Ports | |
| -------------------- | |
| This release contains hardware timer ports for the following hardware architectures: | |
| - ARM Cortex M3/M4/M0/M0+ (all brands, such as Atmel SAM3x/SAM4x/SAM D20, NXP 17xx, 18xx, 43xx, STM32, Freescale Kinetis, ...) | |
| - Atmel AT91SAM7x | |
| - Atmel AT32UC3 (AVR32) | |
| - Renesas RX600 (e.g., RX62N) | |
| - Microchip dsPIC/PIC24 | |
| - Microchip PIC32 | |
| - NXP LPC2106 | |
| - Texas Instruments TMS570 (Cortex-R4) | |
| - Texas Instruments MSP430 | |
| - Xilinx PowerPC 405 | |
| - Xilinx PowerPC 440 | |
| - Xilinx Microblaze | |
| These are defined in trcHardwarePort.h. Some of these are "unofficial" ports, provided by external contributors. | |
| By unofficial, it means that they are not yet verified by Percepio AB. Please refer to trcHardwarePort.h for detailed information. | |
| If you use an unofficial port and beleive it is incorrect, please let us know! (support@percepio.com) | |
| In case your MCU is not yet supported directly, developing a new port is quite easy, just a matter of defining a few macros | |
| according to your specific MCU. See trcHardwarePort.h for further information. | |
| In case you have any questions, do not hesitate to contact support@percepio.com | |
| Percepio AB | |
| Köpmangatan 1A | |
| 72215 Västerås | |
| Sweden | |
| www.percepio.com |