/* | |
FreeRTOS V5.4.2 - Copyright (C) 2009 Real Time Engineers Ltd. | |
This file is part of the FreeRTOS distribution. | |
FreeRTOS is free software; you can redistribute it and/or modify it under | |
the terms of the GNU General Public License (version 2) as published by the | |
Free Software Foundation and modified by the FreeRTOS exception. | |
**NOTE** The exception to the GPL is included to allow you to distribute a | |
combined work that includes FreeRTOS without being obliged to provide the | |
source code for proprietary components outside of the FreeRTOS kernel. | |
Alternative commercial license and support terms are also available upon | |
request. See the licensing section of http://www.FreeRTOS.org for full | |
license details. | |
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT | |
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
more details. | |
You should have received a copy of the GNU General Public License along | |
with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59 | |
Temple Place, Suite 330, Boston, MA 02111-1307 USA. | |
*************************************************************************** | |
* * | |
* Looking for a quick start? Then check out the FreeRTOS eBook! * | |
* See http://www.FreeRTOS.org/Documentation for details * | |
* * | |
*************************************************************************** | |
1 tab == 4 spaces! | |
Please ensure to read the configuration and relevant port sections of the | |
online documentation. | |
http://www.FreeRTOS.org - Documentation, latest information, license and | |
contact details. | |
http://www.SafeRTOS.com - A version that is certified for use in safety | |
critical systems. | |
http://www.OpenRTOS.com - Commercial support, development, porting, | |
licensing and training services. | |
*/ | |
#ifndef FREERTOS_CONFIG_H | |
#define FREERTOS_CONFIG_H | |
#include "LPC17xx.h" | |
/*----------------------------------------------------------- | |
* Application specific definitions. | |
* | |
* These definitions should be adjusted for your particular hardware and | |
* application requirements. | |
* | |
* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE | |
* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. | |
*----------------------------------------------------------*/ | |
#define configUSE_PREEMPTION 1 | |
#define configUSE_IDLE_HOOK 0 | |
#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 5 ) | |
#define configUSE_TICK_HOOK 1 | |
#define configCPU_CLOCK_HZ ( ( unsigned portLONG ) 99000000 ) | |
#define configTICK_RATE_HZ ( ( portTickType ) 1000 ) | |
#define configMINIMAL_STACK_SIZE ( ( unsigned portSHORT ) 80 ) | |
#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 19 * 1024 ) ) | |
#define configMAX_TASK_NAME_LEN ( 12 ) | |
#define configUSE_TRACE_FACILITY 1 | |
#define configUSE_16_BIT_TICKS 0 | |
#define configIDLE_SHOULD_YIELD 0 | |
#define configUSE_CO_ROUTINES 0 | |
#define configUSE_MUTEXES 1 | |
#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) | |
#define configUSE_COUNTING_SEMAPHORES 0 | |
#define configUSE_ALTERNATIVE_API 0 | |
#define configCHECK_FOR_STACK_OVERFLOW 2 | |
#define configUSE_RECURSIVE_MUTEXES 1 | |
#define configQUEUE_REGISTRY_SIZE 10 | |
#define configGENERATE_RUN_TIME_STATS 1 | |
/* Set the following definitions to 1 to include the API function, or zero | |
to exclude the API function. */ | |
#define INCLUDE_vTaskPrioritySet 1 | |
#define INCLUDE_uxTaskPriorityGet 1 | |
#define INCLUDE_vTaskDelete 1 | |
#define INCLUDE_vTaskCleanUpResources 0 | |
#define INCLUDE_vTaskSuspend 1 | |
#define INCLUDE_vTaskDelayUntil 1 | |
#define INCLUDE_vTaskDelay 1 | |
#define INCLUDE_uxTaskGetStackHighWaterMark 1 | |
/*----------------------------------------------------------- | |
* Ethernet configuration. | |
*-----------------------------------------------------------*/ | |
/* MAC address configuration. */ | |
#define configMAC_ADDR0 0x00 | |
#define configMAC_ADDR1 0x12 | |
#define configMAC_ADDR2 0x13 | |
#define configMAC_ADDR3 0x10 | |
#define configMAC_ADDR4 0x15 | |
#define configMAC_ADDR5 0x11 | |
/* IP address configuration. */ | |
#define configIP_ADDR0 192 | |
#define configIP_ADDR1 168 | |
#define configIP_ADDR2 0 | |
#define configIP_ADDR3 201 | |
/* Netmask configuration. */ | |
#define configNET_MASK0 255 | |
#define configNET_MASK1 255 | |
#define configNET_MASK2 255 | |
#define configNET_MASK3 0 | |
/* Use the system definition, if there is one */ | |
#ifdef __NVIC_PRIO_BITS | |
#define configPRIO_BITS __NVIC_PRIO_BITS | |
#else | |
#define configPRIO_BITS 5 /* 32 priority levels */ | |
#endif | |
/* The lowest priority. */ | |
#define configKERNEL_INTERRUPT_PRIORITY ( 31 << (8 - configPRIO_BITS) ) | |
/* Priority 5, or 160 as only the top three bits are implemented. */ | |
#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( 5 << (8 - configPRIO_BITS) ) | |
/* Priorities passed to NVIC_SetPriority() do not require shifting as the | |
function does the shifting itself. Note these priorities need to be equal to | |
or lower than configMAX_SYSCALL_INTERRUPT_PRIORITY - therefore the numeric | |
value needs to be equal to or greater than 5 (on the Cortex M3 the lower the | |
numeric value the higher the interrupt priority). */ | |
#define configEMAC_INTERRUPT_PRIORITY 5 | |
#define configUSB_INTERRUPT_PRIORITY 6 | |
/*----------------------------------------------------------- | |
* Macros required to setup the timer for the run time stats. | |
*-----------------------------------------------------------*/ | |
extern void vConfigureTimerForRunTimeStats( void ); | |
#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() vConfigureTimerForRunTimeStats() | |
#define portGET_RUN_TIME_COUNTER_VALUE() TIM0->TC | |
#endif /* FREERTOS_CONFIG_H */ |