Demo/ColdFire_MCF52221_CodeWarrior/sources/main.c - third_party/github/FreeRTOS/FreeRTOS-Kernel - Git at Google

 /*
 	FreeRTOS V5.4.2 - Copyright (C) 2009 Real Time Engineers Ltd.

 	This file is part of the FreeRTOS distribution.

 	FreeRTOS is free software; you can redistribute it and/or modify it	under
 	the terms of the GNU General Public License (version 2) as published by the
 	Free Software Foundation and modified by the FreeRTOS exception.
 	**NOTE** The exception to the GPL is included to allow you to distribute a
 	combined work that includes FreeRTOS without being obliged to provide the
 	source code for proprietary components outside of the FreeRTOS kernel.
 	Alternative commercial license and support terms are also available upon
 	request.  See the licensing section of http://www.FreeRTOS.org for full
 	license details.

 	FreeRTOS is distributed in the hope that it will be useful,	but WITHOUT
 	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 	FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 	more details.

 	You should have received a copy of the GNU General Public License along
 	with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
 	Temple Place, Suite 330, Boston, MA  02111-1307  USA.


 	***************************************************************************
 	*                                                                         *
 	* Looking for a quick start?  Then check out the FreeRTOS eBook!          *
 	* See http://www.FreeRTOS.org/Documentation for details                   *
 	*                                                                         *
 	***************************************************************************

 	1 tab == 4 spaces!

 	Please ensure to read the configuration and relevant port sections of the
 	online documentation.

 	http://www.FreeRTOS.org - Documentation, latest information, license and
 	contact details.

 	http://www.SafeRTOS.com - A version that is certified for use in safety
 	critical systems.

 	http://www.OpenRTOS.com - Commercial support, development, porting,
 	licensing and training services.
 */


 /*
  * Creates all the demo application tasks, then starts the scheduler.  The WEB
  * documentation provides more details of the standard demo application tasks.
  * In addition to the standard demo tasks, the following tasks and tests are
  * defined and/or created within this file:
  *
  * "Check" task -  This only executes every five seconds but has a high priority
  * to ensure it gets processor time.  Its main function is to check that all the
  * standard demo tasks are still operational.  While no errors have been
  * discovered the check task will toggle an LED every 5 seconds - the toggle
  * rate increasing to 500ms being a visual indication that at least one task has
  * reported unexpected behaviour.
  *
  * "Reg test" tasks - These fill the registers with known values, then check
  * that each register still contains its expected value.  Each task uses
  * different values.  The tasks run with very low priority so get preempted very
  * frequently.  A register containing an unexpected value is indicative of an
  * error in the context switching mechanism.
  *
  */

 /* Standard includes. */
 #include <stdio.h>

 /* Scheduler includes. */
 #include "FreeRTOS.h"
 #include "task.h"
 #include "queue.h"
 #include "semphr.h"

 /* Demo app includes. */
 #include "BlockQ.h"
 #include "crflash.h"
 #include "partest.h"
 #include "semtest.h"
 #include "GenQTest.h"
 #include "QPeek.h"
 #include "comtest2.h"

 /*-----------------------------------------------------------*/

 /* The time between cycles of the 'check' functionality - as described at the
 top of this file. */
 #define mainNO_ERROR_PERIOD					( ( portTickType ) 5000 / portTICK_RATE_MS )

 /* The rate at which the LED controlled by the 'check' task will flash should an
 error have been detected. */
 #define mainERROR_PERIOD 					( ( portTickType ) 500 / portTICK_RATE_MS )

 /* The LED controlled by the 'check' task. */
 #define mainCHECK_LED						( 3 )

 /* ComTest constants - there is no free LED for the comtest tasks. */
 #define mainCOM_TEST_BAUD_RATE				( ( unsigned portLONG ) 19200 )
 #define mainCOM_TEST_LED					( 5 )

 /* Task priorities. */
 #define mainCOM_TEST_PRIORITY				( tskIDLE_PRIORITY + 2 )
 #define mainCHECK_TASK_PRIORITY				( tskIDLE_PRIORITY + 3 )
 #define mainSEM_TEST_PRIORITY				( tskIDLE_PRIORITY + 1 )
 #define mainBLOCK_Q_PRIORITY				( tskIDLE_PRIORITY + 2 )
 #define mainGEN_QUEUE_TASK_PRIORITY			( tskIDLE_PRIORITY )

 /* Co-routines are used to flash the LEDs. */
 #define mainNUM_FLASH_CO_ROUTINES			( 3 )

 /* The baud rate used by the comtest tasks. */
 #define mainBAUD_RATE 						( 38400 )

 /* There is no spare LED for the comtest tasks, so this is set to an invalid
 number. */
 #define mainCOM_LED							( 4 )

 /*
  * Configure the hardware for the demo.
  */
 static void prvSetupHardware( void );

 /*
  * Implements the 'check' task functionality as described at the top of this
  * file.
  */
 static void prvCheckTask( void *pvParameters );

 /*
  * Implement the 'Reg test' functionality as described at the top of this file.
  */
 static void vRegTest1Task( void *pvParameters );
 static void vRegTest2Task( void *pvParameters );

 /*-----------------------------------------------------------*/

 /* Counters used to detect errors within the reg test tasks. */
 static volatile unsigned portLONG ulRegTest1Counter = 0x11111111, ulRegTest2Counter = 0x22222222;

 /*-----------------------------------------------------------*/

 int main( void )
 {
 	/* Setup the hardware ready for this demo. */
 	prvSetupHardware();

 	/* Start the standard demo tasks. */
 	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
 	vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
 	vStartQueuePeekTasks();
 	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
 	vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainBAUD_RATE, mainCOM_LED );

 	/* For demo purposes use some co-routines to flash the LEDs. */
 	vStartFlashCoRoutines( mainNUM_FLASH_CO_ROUTINES );

 	/* Create the check task. */
 	xTaskCreate( prvCheckTask, ( signed portCHAR * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );


 	/* Start the reg test tasks - defined in this file. */
 	xTaskCreate( vRegTest1Task, ( signed portCHAR * ) "Reg1", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest1Counter, tskIDLE_PRIORITY, NULL );
 	xTaskCreate( vRegTest2Task, ( signed portCHAR * ) "Reg2", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest2Counter, tskIDLE_PRIORITY, NULL );

 	/* Start the scheduler. */
 	vTaskStartScheduler();

     /* Will only get here if there was insufficient memory to create the idle
     task. */
 	for( ;; )
 	{
 	}
 }
 /*-----------------------------------------------------------*/

 static void prvCheckTask( void *pvParameters )
 {
 unsigned portLONG ulTicksToWait = mainNO_ERROR_PERIOD, ulError = 0, ulLastRegTest1Count = 0, ulLastRegTest2Count = 0;
 portTickType xLastExecutionTime;
 volatile unsigned portBASE_TYPE uxUnusedStack;

 	( void ) pvParameters;

 	/* Initialise the variable used to control our iteration rate prior to
 	its first use. */
 	xLastExecutionTime = xTaskGetTickCount();

 	for( ;; )
 	{
 		/* Wait until it is time to run the tests again. */
 		vTaskDelayUntil( &xLastExecutionTime, ulTicksToWait );

 		/* Has an error been found in any task? */
 		if( xAreGenericQueueTasksStillRunning() != pdTRUE )
 		{
 			ulError |= 0x01UL;
 		}

 		if( xAreQueuePeekTasksStillRunning() != pdTRUE )
 		{
 			ulError |= 0x02UL;
 		}

 		if( xAreBlockingQueuesStillRunning() != pdTRUE )
 		{
 			ulError |= 0x04UL;
 		}

 		if( xAreSemaphoreTasksStillRunning() != pdTRUE )
 	    {
 	    	ulError |= 0x20UL;
 	    }

 	    if( xAreComTestTasksStillRunning() != pdTRUE )
 	    {
 	    	ulError |= 0x40UL;
 	    }

 		if( ulLastRegTest1Count == ulRegTest1Counter )
 		{
 			ulError |= 0x1000UL;
 		}

 		if( ulLastRegTest2Count == ulRegTest2Counter )
 		{
 			ulError |= 0x1000UL;
 		}

 		ulLastRegTest1Count = ulRegTest1Counter;
 		ulLastRegTest2Count = ulRegTest2Counter;

 		/* If an error has been found then increase our cycle rate, and in so
 		doing increase the rate at which the check task LED toggles. */
 		if( ulError != 0 )
 		{
 	    	ulTicksToWait = mainERROR_PERIOD;
 		}

 		/* Toggle the LED each itteration. */
 		vParTestToggleLED( mainCHECK_LED );

 		/* For demo only - how much unused stack does this task have? */
 		uxUnusedStack = uxTaskGetStackHighWaterMark( NULL );
 	}
 }
 /*-----------------------------------------------------------*/

 void prvSetupHardware( void )
 {
 	portDISABLE_INTERRUPTS();

 	/* Setup the port used to toggle LEDs. */
 	vParTestInitialise();
 }
 /*-----------------------------------------------------------*/

 void vApplicationStackOverflowHook( xTaskHandle *pxTask, signed portCHAR *pcTaskName )
 {
 	/* This will get called if a stack overflow is detected during the context
 	switch.  Set configCHECK_FOR_STACK_OVERFLOWS to 2 to also check for stack
 	problems within nested interrupts, but only do this for debug purposes as
 	it will increase the context switch time. */

 	( void ) pxTask;
 	( void ) pcTaskName;

 	for( ;; )
 	{
 	}
 }
 /*-----------------------------------------------------------*/

 void vApplicationIdleHook( void );
 void vApplicationIdleHook( void )
 {
 	/* The co-routines run in the idle task. */
 	vCoRoutineSchedule();
 }
 /*-----------------------------------------------------------*/

 void exit( int n )
 {
 	/* To keep the linker happy only as the libraries have been removed from
 	the build. */
 	( void ) n;
 	for( ;; ) {}
 }
 /*-----------------------------------------------------------*/

 static void vRegTest1Task( void *pvParameters )
 {
 	/* Sanity check - did we receive the parameter expected? */
 	if( pvParameters != &ulRegTest1Counter )
 	{
 		/* Change here so the check task can detect that an error occurred. */
 		for( ;; )
 		{
 		}
 	}

 	/* Set all the registers to known values, then check that each retains its
 	expected value - as described at the top of this file.  If an error is
 	found then the loop counter will no longer be incremented allowing the check
 	task to recognise the error. */
 	asm volatile 	(	"reg_test_1_start:						\n\t"
 						"	moveq		#1, d0					\n\t"
 						"	moveq		#2, d1					\n\t"
 						"	moveq		#3, d2					\n\t"
 						"	moveq		#4, d3					\n\t"
 						"	moveq		#5, d4					\n\t"
 						"	moveq		#6, d5					\n\t"
 						"	moveq		#7, d6					\n\t"
 						"	moveq		#8, d7					\n\t"
 						"	move		#9, a0					\n\t"
 						"	move		#10, a1					\n\t"
 						"	move		#11, a2					\n\t"
 						"	move		#12, a3					\n\t"
 						"	move		#13, a4					\n\t"
 						"	move		#14, a5					\n\t"
 						"	move		#15, a6					\n\t"
 						"										\n\t"
 						"	cmpi.l		#1, d0					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	cmpi.l		#2, d1					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	cmpi.l		#3, d2					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	cmpi.l		#4, d3					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	cmpi.l		#5, d4					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	cmpi.l		#6, d5					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	cmpi.l		#7, d6					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	cmpi.l		#8, d7					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	move		a0, d0					\n\t"
 						"	cmpi.l		#9, d0					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	move		a1, d0					\n\t"
 						"	cmpi.l		#10, d0					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	move		a2, d0					\n\t"
 						"	cmpi.l		#11, d0					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	move		a3, d0					\n\t"
 						"	cmpi.l		#12, d0					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	move		a4, d0					\n\t"
 						"	cmpi.l		#13, d0					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	move		a5, d0					\n\t"
 						"	cmpi.l		#14, d0					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	move		a6, d0					\n\t"
 						"	cmpi.l		#15, d0					\n\t"
 						"	bne			reg_test_1_error		\n\t"
 						"	move		ulRegTest1Counter, d0	\n\t"
 						"	addq		#1, d0					\n\t"
 						"	move		d0, ulRegTest1Counter	\n\t"
 						"	bra			reg_test_1_start		\n\t"
 						"reg_test_1_error:						\n\t"
 						"	bra			reg_test_1_error		\n\t"
 					);
 }
 /*-----------------------------------------------------------*/

 static void vRegTest2Task( void *pvParameters )
 {
 	/* Sanity check - did we receive the parameter expected? */
 	if( pvParameters != &ulRegTest2Counter )
 	{
 		/* Change here so the check task can detect that an error occurred. */
 		for( ;; )
 		{
 		}
 	}

 	/* Set all the registers to known values, then check that each retains its
 	expected value - as described at the top of this file.  If an error is
 	found then the loop counter will no longer be incremented allowing the check
 	task to recognise the error. */
 	asm volatile 	(	"reg_test_2_start:						\n\t"
 						"	moveq		#10, d0					\n\t"
 						"	moveq		#20, d1					\n\t"
 						"	moveq		#30, d2					\n\t"
 						"	moveq		#40, d3					\n\t"
 						"	moveq		#50, d4					\n\t"
 						"	moveq		#60, d5					\n\t"
 						"	moveq		#70, d6					\n\t"
 						"	moveq		#80, d7					\n\t"
 						"	move		#90, a0					\n\t"
 						"	move		#100, a1				\n\t"
 						"	move		#110, a2				\n\t"
 						"	move		#120, a3				\n\t"
 						"	move		#130, a4				\n\t"
 						"	move		#140, a5				\n\t"
 						"	move		#150, a6				\n\t"
 						"										\n\t"
 						"	cmpi.l		#10, d0					\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	cmpi.l		#20, d1					\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	cmpi.l		#30, d2					\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	cmpi.l		#40, d3					\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	cmpi.l		#50, d4					\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	cmpi.l		#60, d5					\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	cmpi.l		#70, d6					\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	cmpi.l		#80, d7					\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	move		a0, d0					\n\t"
 						"	cmpi.l		#90, d0					\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	move		a1, d0					\n\t"
 						"	cmpi.l		#100, d0				\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	move		a2, d0					\n\t"
 						"	cmpi.l		#110, d0				\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	move		a3, d0					\n\t"
 						"	cmpi.l		#120, d0				\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	move		a4, d0					\n\t"
 						"	cmpi.l		#130, d0				\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	move		a5, d0					\n\t"
 						"	cmpi.l		#140, d0				\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	move		a6, d0					\n\t"
 						"	cmpi.l		#150, d0				\n\t"
 						"	bne			reg_test_2_error		\n\t"
 						"	move		ulRegTest1Counter, d0	\n\t"
 						"	addq		#1, d0					\n\t"
 						"	move		d0, ulRegTest2Counter	\n\t"
 						"	bra			reg_test_2_start		\n\t"
 						"reg_test_2_error:						\n\t"
 						"	bra			reg_test_2_error		\n\t"
 					);
 }
 /*-----------------------------------------------------------*/
	/*
	FreeRTOS V5.4.2 - Copyright (C) 2009 Real Time Engineers Ltd.

	This file is part of the FreeRTOS distribution.

	FreeRTOS is free software; you can redistribute it and/or modify it under
	the terms of the GNU General Public License (version 2) as published by the
	Free Software Foundation and modified by the FreeRTOS exception.
	NOTE The exception to the GPL is included to allow you to distribute a
	combined work that includes FreeRTOS without being obliged to provide the
	source code for proprietary components outside of the FreeRTOS kernel.
	Alternative commercial license and support terms are also available upon
	request. See the licensing section of http://www.FreeRTOS.org for full
	license details.

	FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
	ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	more details.

	You should have received a copy of the GNU General Public License along
	with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
	Temple Place, Suite 330, Boston, MA 02111-1307 USA.


	***************************************************************************
	* *
	* Looking for a quick start? Then check out the FreeRTOS eBook! *
	* See http://www.FreeRTOS.org/Documentation for details *
	* *
	***************************************************************************

	1 tab == 4 spaces!

	Please ensure to read the configuration and relevant port sections of the
	online documentation.

	http://www.FreeRTOS.org - Documentation, latest information, license and
	contact details.

	http://www.SafeRTOS.com - A version that is certified for use in safety
	critical systems.

	http://www.OpenRTOS.com - Commercial support, development, porting,
	licensing and training services.
	*/


	/*
	* Creates all the demo application tasks, then starts the scheduler. The WEB
	* documentation provides more details of the standard demo application tasks.
	* In addition to the standard demo tasks, the following tasks and tests are
	* defined and/or created within this file:
	*
	* "Check" task - This only executes every five seconds but has a high priority
	* to ensure it gets processor time. Its main function is to check that all the
	* standard demo tasks are still operational. While no errors have been
	* discovered the check task will toggle an LED every 5 seconds - the toggle
	* rate increasing to 500ms being a visual indication that at least one task has
	* reported unexpected behaviour.
	*
	* "Reg test" tasks - These fill the registers with known values, then check
	* that each register still contains its expected value. Each task uses
	* different values. The tasks run with very low priority so get preempted very
	* frequently. A register containing an unexpected value is indicative of an
	* error in the context switching mechanism.
	*
	*/

	/* Standard includes. */
	#include <stdio.h>

	/* Scheduler includes. */
	#include "FreeRTOS.h"
	#include "task.h"
	#include "queue.h"
	#include "semphr.h"

	/* Demo app includes. */
	#include "BlockQ.h"
	#include "crflash.h"
	#include "partest.h"
	#include "semtest.h"
	#include "GenQTest.h"
	#include "QPeek.h"
	#include "comtest2.h"

	/-----------------------------------------------------------/

	/* The time between cycles of the 'check' functionality - as described at the
	top of this file. */
	#define mainNO_ERROR_PERIOD ( ( portTickType ) 5000 / portTICK_RATE_MS )

	/* The rate at which the LED controlled by the 'check' task will flash should an
	error have been detected. */
	#define mainERROR_PERIOD ( ( portTickType ) 500 / portTICK_RATE_MS )

	/* The LED controlled by the 'check' task. */
	#define mainCHECK_LED ( 3 )

	/* ComTest constants - there is no free LED for the comtest tasks. */
	#define mainCOM_TEST_BAUD_RATE ( ( unsigned portLONG ) 19200 )
	#define mainCOM_TEST_LED ( 5 )

	/* Task priorities. */
	#define mainCOM_TEST_PRIORITY ( tskIDLE_PRIORITY + 2 )
	#define mainCHECK_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
	#define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
	#define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
	#define mainGEN_QUEUE_TASK_PRIORITY ( tskIDLE_PRIORITY )

	/* Co-routines are used to flash the LEDs. */
	#define mainNUM_FLASH_CO_ROUTINES ( 3 )

	/* The baud rate used by the comtest tasks. */
	#define mainBAUD_RATE ( 38400 )

	/* There is no spare LED for the comtest tasks, so this is set to an invalid
	number. */
	#define mainCOM_LED ( 4 )

	/*
	* Configure the hardware for the demo.
	*/
	static void prvSetupHardware( void );

	/*
	* Implements the 'check' task functionality as described at the top of this
	* file.
	*/
	static void prvCheckTask( void *pvParameters );

	/*
	* Implement the 'Reg test' functionality as described at the top of this file.
	*/
	static void vRegTest1Task( void *pvParameters );
	static void vRegTest2Task( void *pvParameters );

	/-----------------------------------------------------------/

	/* Counters used to detect errors within the reg test tasks. */
	static volatile unsigned portLONG ulRegTest1Counter = 0x11111111, ulRegTest2Counter = 0x22222222;

	/-----------------------------------------------------------/

	int main( void )
	{
	/* Setup the hardware ready for this demo. */
	prvSetupHardware();

	/* Start the standard demo tasks. */
	vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
	vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
	vStartQueuePeekTasks();
	vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
	vAltStartComTestTasks( mainCOM_TEST_PRIORITY, mainBAUD_RATE, mainCOM_LED );

	/* For demo purposes use some co-routines to flash the LEDs. */
	vStartFlashCoRoutines( mainNUM_FLASH_CO_ROUTINES );

	/* Create the check task. */
	xTaskCreate( prvCheckTask, ( signed portCHAR * ) "Check", configMINIMAL_STACK_SIZE, NULL, mainCHECK_TASK_PRIORITY, NULL );


	/* Start the reg test tasks - defined in this file. */
	xTaskCreate( vRegTest1Task, ( signed portCHAR * ) "Reg1", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest1Counter, tskIDLE_PRIORITY, NULL );
	xTaskCreate( vRegTest2Task, ( signed portCHAR * ) "Reg2", configMINIMAL_STACK_SIZE, ( void * ) &ulRegTest2Counter, tskIDLE_PRIORITY, NULL );

	/* Start the scheduler. */
	vTaskStartScheduler();

	/* Will only get here if there was insufficient memory to create the idle
	task. */
	for( ;; )
	{
	}
	}
	/-----------------------------------------------------------/

	static void prvCheckTask( void *pvParameters )
	{
	unsigned portLONG ulTicksToWait = mainNO_ERROR_PERIOD, ulError = 0, ulLastRegTest1Count = 0, ulLastRegTest2Count = 0;
	portTickType xLastExecutionTime;
	volatile unsigned portBASE_TYPE uxUnusedStack;

	( void ) pvParameters;

	/* Initialise the variable used to control our iteration rate prior to
	its first use. */
	xLastExecutionTime = xTaskGetTickCount();

	for( ;; )
	{
	/* Wait until it is time to run the tests again. */
	vTaskDelayUntil( &xLastExecutionTime, ulTicksToWait );

	/* Has an error been found in any task? */
	if( xAreGenericQueueTasksStillRunning() != pdTRUE )
	{
	ulError \|= 0x01UL;
	}

	if( xAreQueuePeekTasksStillRunning() != pdTRUE )
	{
	ulError \|= 0x02UL;
	}

	if( xAreBlockingQueuesStillRunning() != pdTRUE )
	{
	ulError \|= 0x04UL;
	}

	if( xAreSemaphoreTasksStillRunning() != pdTRUE )
	{
	ulError \|= 0x20UL;
	}

	if( xAreComTestTasksStillRunning() != pdTRUE )
	{
	ulError \|= 0x40UL;
	}

	if( ulLastRegTest1Count == ulRegTest1Counter )
	{
	ulError \|= 0x1000UL;
	}

	if( ulLastRegTest2Count == ulRegTest2Counter )
	{
	ulError \|= 0x1000UL;
	}

	ulLastRegTest1Count = ulRegTest1Counter;
	ulLastRegTest2Count = ulRegTest2Counter;

	/* If an error has been found then increase our cycle rate, and in so
	doing increase the rate at which the check task LED toggles. */
	if( ulError != 0 )
	{
	ulTicksToWait = mainERROR_PERIOD;
	}

	/* Toggle the LED each itteration. */
	vParTestToggleLED( mainCHECK_LED );

	/* For demo only - how much unused stack does this task have? */
	uxUnusedStack = uxTaskGetStackHighWaterMark( NULL );
	}
	}
	/-----------------------------------------------------------/

	void prvSetupHardware( void )
	{
	portDISABLE_INTERRUPTS();

	/* Setup the port used to toggle LEDs. */
	vParTestInitialise();
	}
	/-----------------------------------------------------------/

	void vApplicationStackOverflowHook( xTaskHandle pxTask, signed portCHAR pcTaskName )
	{
	/* This will get called if a stack overflow is detected during the context
	switch. Set configCHECK_FOR_STACK_OVERFLOWS to 2 to also check for stack
	problems within nested interrupts, but only do this for debug purposes as
	it will increase the context switch time. */

	( void ) pxTask;
	( void ) pcTaskName;

	for( ;; )
	{
	}
	}
	/-----------------------------------------------------------/

	void vApplicationIdleHook( void );
	void vApplicationIdleHook( void )
	{
	/* The co-routines run in the idle task. */
	vCoRoutineSchedule();
	}
	/-----------------------------------------------------------/

	void exit( int n )
	{
	/* To keep the linker happy only as the libraries have been removed from
	the build. */
	( void ) n;
	for( ;; ) {}
	}
	/-----------------------------------------------------------/

	static void vRegTest1Task( void *pvParameters )
	{
	/* Sanity check - did we receive the parameter expected? */
	if( pvParameters != &ulRegTest1Counter )
	{
	/* Change here so the check task can detect that an error occurred. */
	for( ;; )
	{
	}
	}

	/* Set all the registers to known values, then check that each retains its
	expected value - as described at the top of this file. If an error is
	found then the loop counter will no longer be incremented allowing the check
	task to recognise the error. */
	asm volatile ( "reg_test_1_start: \n\t"
	" moveq #1, d0 \n\t"
	" moveq #2, d1 \n\t"
	" moveq #3, d2 \n\t"
	" moveq #4, d3 \n\t"
	" moveq #5, d4 \n\t"
	" moveq #6, d5 \n\t"
	" moveq #7, d6 \n\t"
	" moveq #8, d7 \n\t"
	" move #9, a0 \n\t"
	" move #10, a1 \n\t"
	" move #11, a2 \n\t"
	" move #12, a3 \n\t"
	" move #13, a4 \n\t"
	" move #14, a5 \n\t"
	" move #15, a6 \n\t"
	" \n\t"
	" cmpi.l #1, d0 \n\t"
	" bne reg_test_1_error \n\t"
	" cmpi.l #2, d1 \n\t"
	" bne reg_test_1_error \n\t"
	" cmpi.l #3, d2 \n\t"
	" bne reg_test_1_error \n\t"
	" cmpi.l #4, d3 \n\t"
	" bne reg_test_1_error \n\t"
	" cmpi.l #5, d4 \n\t"
	" bne reg_test_1_error \n\t"
	" cmpi.l #6, d5 \n\t"
	" bne reg_test_1_error \n\t"
	" cmpi.l #7, d6 \n\t"
	" bne reg_test_1_error \n\t"
	" cmpi.l #8, d7 \n\t"
	" bne reg_test_1_error \n\t"
	" move a0, d0 \n\t"
	" cmpi.l #9, d0 \n\t"
	" bne reg_test_1_error \n\t"
	" move a1, d0 \n\t"
	" cmpi.l #10, d0 \n\t"
	" bne reg_test_1_error \n\t"
	" move a2, d0 \n\t"
	" cmpi.l #11, d0 \n\t"
	" bne reg_test_1_error \n\t"
	" move a3, d0 \n\t"
	" cmpi.l #12, d0 \n\t"
	" bne reg_test_1_error \n\t"
	" move a4, d0 \n\t"
	" cmpi.l #13, d0 \n\t"
	" bne reg_test_1_error \n\t"
	" move a5, d0 \n\t"
	" cmpi.l #14, d0 \n\t"
	" bne reg_test_1_error \n\t"
	" move a6, d0 \n\t"
	" cmpi.l #15, d0 \n\t"
	" bne reg_test_1_error \n\t"
	" move ulRegTest1Counter, d0 \n\t"
	" addq #1, d0 \n\t"
	" move d0, ulRegTest1Counter \n\t"
	" bra reg_test_1_start \n\t"
	"reg_test_1_error: \n\t"
	" bra reg_test_1_error \n\t"
	);
	}
	/-----------------------------------------------------------/

	static void vRegTest2Task( void *pvParameters )
	{
	/* Sanity check - did we receive the parameter expected? */
	if( pvParameters != &ulRegTest2Counter )
	{
	/* Change here so the check task can detect that an error occurred. */
	for( ;; )
	{
	}
	}

	/* Set all the registers to known values, then check that each retains its
	expected value - as described at the top of this file. If an error is
	found then the loop counter will no longer be incremented allowing the check
	task to recognise the error. */
	asm volatile ( "reg_test_2_start: \n\t"
	" moveq #10, d0 \n\t"
	" moveq #20, d1 \n\t"
	" moveq #30, d2 \n\t"
	" moveq #40, d3 \n\t"
	" moveq #50, d4 \n\t"
	" moveq #60, d5 \n\t"
	" moveq #70, d6 \n\t"
	" moveq #80, d7 \n\t"
	" move #90, a0 \n\t"
	" move #100, a1 \n\t"
	" move #110, a2 \n\t"
	" move #120, a3 \n\t"
	" move #130, a4 \n\t"
	" move #140, a5 \n\t"
	" move #150, a6 \n\t"
	" \n\t"
	" cmpi.l #10, d0 \n\t"
	" bne reg_test_2_error \n\t"
	" cmpi.l #20, d1 \n\t"
	" bne reg_test_2_error \n\t"
	" cmpi.l #30, d2 \n\t"
	" bne reg_test_2_error \n\t"
	" cmpi.l #40, d3 \n\t"
	" bne reg_test_2_error \n\t"
	" cmpi.l #50, d4 \n\t"
	" bne reg_test_2_error \n\t"
	" cmpi.l #60, d5 \n\t"
	" bne reg_test_2_error \n\t"
	" cmpi.l #70, d6 \n\t"
	" bne reg_test_2_error \n\t"
	" cmpi.l #80, d7 \n\t"
	" bne reg_test_2_error \n\t"
	" move a0, d0 \n\t"
	" cmpi.l #90, d0 \n\t"
	" bne reg_test_2_error \n\t"
	" move a1, d0 \n\t"
	" cmpi.l #100, d0 \n\t"
	" bne reg_test_2_error \n\t"
	" move a2, d0 \n\t"
	" cmpi.l #110, d0 \n\t"
	" bne reg_test_2_error \n\t"
	" move a3, d0 \n\t"
	" cmpi.l #120, d0 \n\t"
	" bne reg_test_2_error \n\t"
	" move a4, d0 \n\t"
	" cmpi.l #130, d0 \n\t"
	" bne reg_test_2_error \n\t"
	" move a5, d0 \n\t"
	" cmpi.l #140, d0 \n\t"
	" bne reg_test_2_error \n\t"
	" move a6, d0 \n\t"
	" cmpi.l #150, d0 \n\t"
	" bne reg_test_2_error \n\t"
	" move ulRegTest1Counter, d0 \n\t"
	" addq #1, d0 \n\t"
	" move d0, ulRegTest2Counter \n\t"
	" bra reg_test_2_start \n\t"
	"reg_test_2_error: \n\t"
	" bra reg_test_2_error \n\t"
	);
	}
	/-----------------------------------------------------------/