blob: 7b1bef654dbe462e0dd0f0bf0647c0b463a8e2aa [file] [log] [blame]
FreeRTOS V5.4.2 - Copyright (C) 2009 Real Time Engineers Ltd.
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation and modified by the FreeRTOS exception.
**NOTE** The exception to the GPL is included to allow you to distribute a
combined work that includes FreeRTOS without being obliged to provide the
source code for proprietary components outside of the FreeRTOS kernel.
Alternative commercial license and support terms are also available upon
request. See the licensing section of for full
license details.
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
Temple Place, Suite 330, Boston, MA 02111-1307 USA.
* *
* Looking for a quick start? Then check out the FreeRTOS eBook! *
* See for details *
* *
1 tab == 4 spaces!
Please ensure to read the configuration and relevant port sections of the
online documentation. - Documentation, latest information, license and
contact details. - A version that is certified for use in safety
critical systems. - Commercial support, development, porting,
licensing and training services.
* This file defines the button push task and ISR as described at the top of
* main.c. The ISR is called from a wrapper function defined in ButtonISR.s26.
/* Kernel includes. */
#include "FreeRTOS.h"
#include "task.h"
#include "semphr.h"
/* The LED output used by the button push task. */
#define butLED1 P7_bit.no7
/* A short delay used for button debouncing. */
#define butDEBOUNCE_DELAY ( 200 / portTICK_RATE_MS )
/* The semaphore used to synchronise the button push task with the interrupt. */
static xSemaphoreHandle xButtonSemaphore;
* The definition of the button task itself. See the comments at the top of
* main.c.
void vButtonTask( void *pvParameters )
/* Ensure the semaphore is created before it gets used. */
vSemaphoreCreateBinary( xButtonSemaphore );
for( ;; )
/* Block on the semaphore to wait for an interrupt event. The semaphore
is 'given' from vButtonISRHandler() below. Using portMAX_DELAY as the
block time will cause the task to block indefinitely provided
INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h. */
xSemaphoreTake( xButtonSemaphore, portMAX_DELAY );
/* The button must have been pushed for this line to be executed.
Simply toggle the LED. */
butLED1 = !butLED1;
/* Wait a short time then clear any pending button pushes as a crude
method of debouncing the switch. xSemaphoreTake() uses a block time of
zero this time so it returns immediately rather than waiting for the
interrupt to occur. */
vTaskDelay( butDEBOUNCE_DELAY );
xSemaphoreTake( xButtonSemaphore, 0 );
* The C portion of the interrupt handler. Interrupts are triggered by pushing
* the button on the target board. This interrupt can cause a context switch
* so has an assembly file wrapper defined within ButtonISR.s26.
void vButtonISRHandler( void )
short sHigherPriorityTaskWoken = pdFALSE;
/* 'Give' the semaphore to unblock the button task. */
xSemaphoreGiveFromISR( xButtonSemaphore, &sHigherPriorityTaskWoken );
/* If giving the semaphore unblocked a task, and the unblocked task has a
priority that is higher than the currently running task, then
sHigherPriorityTaskWoken will have been set to pdTRUE. Passing a pdTRUE
value to portYIELD_FROM_ISR() will cause this interrupt to return directly
to the higher priority unblocked task. */
portYIELD_FROM_ISR( sHigherPriorityTaskWoken );