/* | |
FreeRTOS V5.4.2 - Copyright (C) 2009 Real Time Engineers Ltd. | |
This file is part of the FreeRTOS distribution. | |
FreeRTOS is free software; you can redistribute it and/or modify it under | |
the terms of the GNU General Public License (version 2) as published by the | |
Free Software Foundation and modified by the FreeRTOS exception. | |
**NOTE** The exception to the GPL is included to allow you to distribute a | |
combined work that includes FreeRTOS without being obliged to provide the | |
source code for proprietary components outside of the FreeRTOS kernel. | |
Alternative commercial license and support terms are also available upon | |
request. See the licensing section of http://www.FreeRTOS.org for full | |
license details. | |
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT | |
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | |
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for | |
more details. | |
You should have received a copy of the GNU General Public License along | |
with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59 | |
Temple Place, Suite 330, Boston, MA 02111-1307 USA. | |
*************************************************************************** | |
* * | |
* Looking for a quick start? Then check out the FreeRTOS eBook! * | |
* See http://www.FreeRTOS.org/Documentation for details * | |
* * | |
*************************************************************************** | |
1 tab == 4 spaces! | |
Please ensure to read the configuration and relevant port sections of the | |
online documentation. | |
http://www.FreeRTOS.org - Documentation, latest information, license and | |
contact details. | |
http://www.SafeRTOS.com - A version that is certified for use in safety | |
critical systems. | |
http://www.OpenRTOS.com - Commercial support, development, porting, | |
licensing and training services. | |
*/ | |
#include "FreeRTOS.h" | |
#include "IntQueueTimer.h" | |
#include "IntQueue.h" | |
#define timerINTERRUPT3_FREQUENCY ( 2000UL ) | |
#define timerINTERRUPT4_FREQUENCY ( 2001UL ) | |
void vT3InterruptHandler( void ); | |
void vT4InterruptHandler( void ); | |
void __attribute__( (interrupt(ipl0), vector(_TIMER_3_VECTOR))) vT3InterruptWrapper( void ); | |
void __attribute__( (interrupt(ipl0), vector(_TIMER_4_VECTOR))) vT4InterruptWrapper( void ); | |
void vInitialiseTimerForIntQueueTest( void ) | |
{ | |
/* Timer 1 is used for the tick interrupt, timer 2 is used for the high | |
frequency interrupt test. This file therefore uses timers 3 and 4. */ | |
T3CON = 0; | |
TMR3 = 0; | |
PR3 = ( unsigned portSHORT ) ( configPERIPHERAL_CLOCK_HZ / timerINTERRUPT3_FREQUENCY ); | |
/* Setup timer 3 interrupt priority to be above the kernel priority. */ | |
ConfigIntTimer3( T3_INT_ON | ( configMAX_SYSCALL_INTERRUPT_PRIORITY - 1 ) ); | |
/* Clear the interrupt as a starting condition. */ | |
IFS0bits.T3IF = 0; | |
/* Enable the interrupt. */ | |
IEC0bits.T3IE = 1; | |
/* Start the timer. */ | |
T3CONbits.TON = 1; | |
/* Do the same for timer 4. */ | |
T4CON = 0; | |
TMR4 = 0; | |
PR4 = ( unsigned portSHORT ) ( configPERIPHERAL_CLOCK_HZ / timerINTERRUPT4_FREQUENCY ); | |
/* Setup timer 4 interrupt priority to be above the kernel priority. */ | |
ConfigIntTimer4( T4_INT_ON | ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) ); | |
/* Clear the interrupt as a starting condition. */ | |
IFS0bits.T4IF = 0; | |
/* Enable the interrupt. */ | |
IEC0bits.T4IE = 1; | |
/* Start the timer. */ | |
T4CONbits.TON = 1; | |
} | |
/*-----------------------------------------------------------*/ | |
void vT3InterruptHandler( void ) | |
{ | |
IFS0bits.T3IF = 0; | |
portEND_SWITCHING_ISR( xFirstTimerHandler() ); | |
} | |
/*-----------------------------------------------------------*/ | |
void vT4InterruptHandler( void ) | |
{ | |
IFS0bits.T4IF = 0; | |
portEND_SWITCHING_ISR( xSecondTimerHandler() ); | |
} | |