blob: e978bcb8fbc7f92a390c74db29c7972bf1f4f774 [file] [log] [blame]
FreeRTOS V5.4.2 - Copyright (C) 2009 Real Time Engineers Ltd.
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation and modified by the FreeRTOS exception.
**NOTE** The exception to the GPL is included to allow you to distribute a
combined work that includes FreeRTOS without being obliged to provide the
source code for proprietary components outside of the FreeRTOS kernel.
Alternative commercial license and support terms are also available upon
request. See the licensing section of for full
license details.
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with FreeRTOS; if not, write to the Free Software Foundation, Inc., 59
Temple Place, Suite 330, Boston, MA 02111-1307 USA.
* *
* Looking for a quick start? Then check out the FreeRTOS eBook! *
* See for details *
* *
1 tab == 4 spaces!
Please ensure to read the configuration and relevant port sections of the
online documentation. - Documentation, latest information, license and
contact details. - A version that is certified for use in safety
critical systems. - Commercial support, development, porting,
licensing and training services.
#ifdef __cplusplus
extern "C" {
* Port specific definitions.
* The settings in this file configure FreeRTOS correctly for the
* given hardware and compiler.
* These settings should not be altered.
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE unsigned portLONG
#define portBASE_TYPE portLONG
#if( configUSE_16_BIT_TICKS == 1 )
typedef unsigned portSHORT portTickType;
#define portMAX_DELAY ( portTickType ) 0xffff
typedef unsigned portLONG portTickType;
#define portMAX_DELAY ( portTickType ) 0xffffffff
/* Hardware specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_RATE_MS ( ( portTickType ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 4
/* Task utilities. */
* ISR entry and exit macros. These are only required if a task switch
* is required from an ISR.
/* If a switch is required then we just need to call */
/* vTaskSwitchContext() as the context has already been */
/* saved. */
#define portEXIT_SWITCHING_ISR(SwitchRequired) \
{ \
extern void vTaskSwitchContext(void); \
if(SwitchRequired) \
{ \
vTaskSwitchContext(); \
} \
} \
extern void vPortYield( void );
#define portYIELD() vPortYield()
/* Critical section management. */
* We don't need to worry about whether we're in ARM or
* THUMB mode with the Keil Real View compiler when enabling
* or disabling interrupts as the compiler's intrinsic functions
* take care of that for us.
#define portDISABLE_INTERRUPTS() __disable_irq()
#define portENABLE_INTERRUPTS() __enable_irq()
* Critical section control
* The code generated by the Keil compiler does not maintain separate
* stack and frame pointers. The portENTER_CRITICAL macro cannot therefore
* use the stack as per other ports. Instead a variable is used to keep
* track of the critical section nesting. This necessitates the use of a
* function in place of the macro.
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
/* Compiler specifics. */
#define inline
#define register
#define portNOP() __asm{ NOP }
/* Task function macros as described on the WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#ifdef __cplusplus
#endif /* PORTMACRO_H */