blob: 6ac84a853d9d3ac38798bf3afc1d39075da01f52 [file] [log] [blame]
/* V5.2.0 - Copyright (C) 2003-2009 Richard Barry.
This file is part of the distribution. is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License (version 2) as published
by the Free Software Foundation and modified by the FreeRTOS exception. is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with; if not, write to the Free Software Foundation, Inc., 59
Temple Place, Suite 330, Boston, MA 02111-1307 USA.
A special exception to the GPL is included to allow you to distribute a
combined work that includes without being obliged to provide
the source code for any proprietary components. See the licensing section
of for full details.
* *
* Get the FreeRTOS eBook! See *
* *
* This is a concise, step by step, 'hands on' guide that describes both *
* general multitasking concepts and FreeRTOS specifics. It presents and *
* explains numerous examples that are written using the FreeRTOS API. *
* Full source code for all the examples is provided in an accompanying *
* .zip file. *
* *
1 tab == 4 spaces!
Please ensure to read the configuration and relevant port sections of the
online documentation. - Documentation, latest information, license and
contact details. - A version that is certified for use in safety
critical systems. - Commercial support, development, porting,
licensing and training services.
/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
* Implementation of functions defined in portable.h for the MSP430 port.
/* Constants required for hardware setup. The tick ISR runs off the ACLK,
not the MCLK. */
#define portACLK_FREQUENCY_HZ ( ( portTickType ) 32768 )
#define portINITIAL_CRITICAL_NESTING ( ( unsigned portSHORT ) 10 )
#define portFLAGS_INT_ENABLED ( ( portSTACK_TYPE ) 0x08 )
/* We require the address of the pxCurrentTCB variable, but don't want to know
any details of its type. */
typedef void tskTCB;
extern volatile tskTCB * volatile pxCurrentTCB;
/* Each task maintains a count of the critical section nesting depth. Each
time a critical section is entered the count is incremented. Each time a
critical section is exited the count is decremented - with interrupts only
being re-enabled if the count is zero.
usCriticalNesting will get set to zero when the scheduler starts, but must
not be initialised to zero as this will cause problems during the startup
sequence. */
volatile unsigned portSHORT usCriticalNesting = portINITIAL_CRITICAL_NESTING;
* Sets up the periodic ISR used for the RTOS tick. This uses timer 0, but
* could have alternatively used the watchdog timer or timer 1.
void vPortSetupTimerInterrupt( void );
* Initialise the stack of a task to look exactly as if a call to
* portSAVE_CONTEXT had been called.
* See the header file portable.h.
portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters )
Place a few bytes of known values on the bottom of the stack.
This is just useful for debugging and can be included if required.
*pxTopOfStack = ( portSTACK_TYPE ) 0x1111;
*pxTopOfStack = ( portSTACK_TYPE ) 0x2222;
*pxTopOfStack = ( portSTACK_TYPE ) 0x3333;
/* The msp430 automatically pushes the PC then SR onto the stack before
executing an ISR. We want the stack to look just as if this has happened
so place a pointer to the start of the task on the stack first - followed
by the flags we want the task to use when it starts up. */
*pxTopOfStack = ( portSTACK_TYPE ) pxCode;
*pxTopOfStack = portFLAGS_INT_ENABLED;
/* Next the general purpose registers. */
*pxTopOfStack = ( portSTACK_TYPE ) 0x4444;
*pxTopOfStack = ( portSTACK_TYPE ) 0x5555;
*pxTopOfStack = ( portSTACK_TYPE ) 0x6666;
*pxTopOfStack = ( portSTACK_TYPE ) 0x7777;
*pxTopOfStack = ( portSTACK_TYPE ) 0x8888;
*pxTopOfStack = ( portSTACK_TYPE ) 0x9999;
*pxTopOfStack = ( portSTACK_TYPE ) 0xaaaa;
*pxTopOfStack = ( portSTACK_TYPE ) 0xbbbb;
/* When the task starts is will expect to find the function parameter in
R15. */
*pxTopOfStack = ( portSTACK_TYPE ) pvParameters;
*pxTopOfStack = ( portSTACK_TYPE ) 0xdddd;
*pxTopOfStack = ( portSTACK_TYPE ) 0xeeee;
*pxTopOfStack = ( portSTACK_TYPE ) 0xffff;
/* A variable is used to keep track of the critical section nesting.
This variable has to be stored as part of the task context and is
initially set to zero. */
/* Return a pointer to the top of the stack we have generated so this can
be stored in the task control block for the task. */
return pxTopOfStack;
void vPortEndScheduler( void )
/* It is unlikely that the MSP430 port will get stopped. If required simply
disable the tick interrupt here. */
* Hardware initialisation to generate the RTOS tick. This uses timer 0
* but could alternatively use the watchdog timer or timer 1.
void vPortSetupTimerInterrupt( void )
/* Ensure the timer is stopped. */
TACTL = 0;
/* Run the timer of the ACLK. */
/* Clear everything to start with. */
/* Set the compare match value according to the tick rate we want. */
/* Enable the interrupts. */
/* Start up clean. */
/* Up mode. */
TACTL |= MC_1;