blob: 5b22c861c256fe71a166fd5180a47e27323f3a14 [file] [log] [blame]
/*This file is prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
*
* \brief FreeRTOS demonstration for AVR32 UC3.
*
* - Compiler: IAR EWAVR32 and GNU GCC for AVR32
* - Supported devices: All AVR32 devices can be used.
* - AppNote:
*
* \author Atmel Corporation: http://www.atmel.com \n
* Support and FAQ: http://support.atmel.no/
*
******************************************************************************/
/* Copyright (c) 2007, Atmel Corporation All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of ATMEL may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef FREERTOS_CONFIG_H
#define FREERTOS_CONFIG_H
#include "board.h"
/*-----------------------------------------------------------
* Application specific definitions.
*
* These definitions should be adjusted for your particular hardware and
* application requirements.
*
* THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
* FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
*
* See http://www.freertos.org/a00110.html.
*----------------------------------------------------------*/
#define configUSE_PREEMPTION 1
#define configUSE_IDLE_HOOK 0
#define configUSE_TICK_HOOK 0
#define configCPU_CLOCK_HZ ( FOSC0 ) /* Hz clk gen */
#define configPBA_CLOCK_HZ ( FOSC0 )
#define configTICK_RATE_HZ ( ( portTickType ) 1000 )
#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 8 )
#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 128 )
/* configTOTAL_HEAP_SIZE is not used when heap_3.c is used. */
#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 1024*25 ) )
#define configMAX_TASK_NAME_LEN ( 16 )
#define configUSE_TRACE_FACILITY 0
#define configUSE_16_BIT_TICKS 0
#define configIDLE_SHOULD_YIELD 1
/* Co-routine definitions. */
#define configUSE_CO_ROUTINES 0
#define configMAX_CO_ROUTINE_PRIORITIES ( 0 )
/* Set the following definitions to 1 to include the API function, or zero
to exclude the API function. */
#define INCLUDE_vTaskPrioritySet 1
#define INCLUDE_uxTaskPriorityGet 1
#define INCLUDE_vTaskDelete 1
#define INCLUDE_vTaskCleanUpResources 0
#define INCLUDE_vTaskSuspend 1
#define INCLUDE_vTaskDelayUntil 1
#define INCLUDE_vTaskDelay 1
#define INCLUDE_xTaskGetCurrentTaskHandle 0
#define INCLUDE_xTaskGetSchedulerState 1
/* configTICK_USE_TC is a boolean indicating whether to use a Timer Counter
for the tick generation. Timer Counter will generate an accurate Tick;
otherwise the CPU will generate a tick but with time drift.
configTICK_TC_CHANNEL is the TC channel. */
#define configTICK_USE_TC 1
#define configTICK_TC_CHANNEL 2
/* configHEAP_INIT is a boolean indicating whether to initialize the heap with
0xA5 in order to be able to determine the maximal heap consumption. */
#define configHEAP_INIT 0
/* Debug trace configuration.
configDBG is a boolean indicating whether to activate the debug trace. */
#if BOARD == EVK1100
#define configDBG 1
#define configDBG_USART (&AVR32_USART1)
#define configDBG_USART_RX_PIN AVR32_USART1_RXD_0_PIN
#define configDBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_FUNCTION
#define configDBG_USART_TX_PIN AVR32_USART1_TXD_0_PIN
#define configDBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_FUNCTION
#define configDBG_USART_BAUDRATE 57600
#define serialPORT_USART (&AVR32_USART0)
#define serialPORT_USART_RX_PIN AVR32_USART0_RXD_0_PIN
#define serialPORT_USART_RX_FUNCTION AVR32_USART0_RXD_0_FUNCTION
#define serialPORT_USART_TX_PIN AVR32_USART0_TXD_0_PIN
#define serialPORT_USART_TX_FUNCTION AVR32_USART0_TXD_0_FUNCTION
#define serialPORT_USART_IRQ AVR32_USART0_IRQ
#define serialPORT_USART_BAUDRATE 57600
#elif BOARD == EVK1101
#define configDBG 1
#define configDBG_USART (&AVR32_USART1)
#define configDBG_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN
#define configDBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION
#define configDBG_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN
#define configDBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION
#define configDBG_USART_BAUDRATE 57600
#define serialPORT_USART (&AVR32_USART1)
#define serialPORT_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN
#define serialPORT_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION
#define serialPORT_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN
#define serialPORT_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION
#define serialPORT_USART_IRQ AVR32_USART1_IRQ
#define serialPORT_USART_BAUDRATE 57600
#endif
#endif /* FREERTOS_CONFIG_H */