Update resource files for latest IAR releases.
diff --git a/Demo/ARM7_AT91SAM7S64_IAR/resource/at91sam7s-ek-flash.mac b/Demo/ARM7_AT91SAM7S64_IAR/resource/at91sam7s-ek-flash.mac
new file mode 100644
index 0000000..5d0997b
--- /dev/null
+++ b/Demo/ARM7_AT91SAM7S64_IAR/resource/at91sam7s-ek-flash.mac
@@ -0,0 +1,73 @@
+// ----------------------------------------------------------------------------
+// ATMEL Microcontroller Software Support - ROUSSET -
+// ----------------------------------------------------------------------------
+// DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+// DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+// OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+// ----------------------------------------------------------------------------
+// File Name : SAM7_FLASH.mac
+// Object : Generic Macro File for IAR
+// 1.0 17/Aug/05 FBr : Creation
+// ----------------------------------------------------------------------------
+
+/*********************************************************************
+*
+* _InitRSTC()
+*
+* Function description
+* Initializes the RSTC (Reset controller).
+* This makes sense since the default is to not allow user resets, which makes it impossible to
+* apply a second RESET via J-Link
+*/
+_InitRSTC() {
+ __writeMemory32(0xA5000001, 0xFFFFFD08,"Memory"); // Allow user reset
+}
+
+/*********************************************************************
+*
+* _InitPLL()
+* Function description
+* Initializes the PMC.
+* 1. Enable the Main Oscillator
+* 2. Configure PLL to 96MHz
+* 3. Switch Master Clock (MCK) on PLL/2 = 48MHz
+*/
+_InitPLL() {
+
+ __message "Enable Main Oscillator";
+ __writeMemory32(0x00000601,0xFFFFFc20,"Memory"); // MOSC
+ while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x1) );
+
+ __message "Set PLL to 96MHz";
+ __writeMemory32(0x10191c05,0xFFFFFc2c,"Memory"); // LOCK
+ while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x4) );
+
+ __message "Set Master Clock to 48MHz";
+ __writeMemory32(0x00000004,0xFFFFFc30,"Memory"); // MCKRDY
+ while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x8) );
+ __writeMemory32(0x00000007,0xFFFFFc30,"Memory"); // MCKRDY
+ while( !(__readMemory32(0xFFFFFc68,"Memory") & 0x8) );
+
+ // Set 1 WS for Flash accesses on each EFC
+ __writeMemory32(0x00480100,0xFFFFFF60,"Memory");
+ __writeMemory32(0x00480100,0xFFFFFF70,"Memory");
+}
+
+/*********************************************************************
+*
+* execUserReset() : JTAG set initially to Full Speed
+*/
+execUserReset() {
+ __message "execUserReset()";
+ __hwReset(0); // Hardware Reset: CPU is automatically halted after the reset (JTAG is already configured to 32kHz)
+ _InitPLL(); // Allow to debug at JTAG Full Speed
+ _InitRSTC(); // Enable User Reset to allow execUserReset() execution
+}
+
diff --git a/Demo/ARM7_AT91SAM7S64_IAR/resource/at91sam7s64-flash.board b/Demo/ARM7_AT91SAM7S64_IAR/resource/at91sam7s64-flash.board
new file mode 100644
index 0000000..e2a0466
--- /dev/null
+++ b/Demo/ARM7_AT91SAM7S64_IAR/resource/at91sam7s64-flash.board
@@ -0,0 +1,12 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<flash_board>
+ <pass>
+ <loader>$TOOLKIT_DIR$\config\flashloader\Atmel\AT91SAM7S64-EK\flash-at91sam7s64.flash</loader>
+ <range>CODE 0x100000 0x110000</range>
+ <rel_offset>0</rel_offset>
+ <args>--flash
+--boot
+</args>
+ </pass>
+</flash_board>
