blob: 556a3f49019c9fad2870e903cfc571379871c76b [file] [log] [blame]
FreeRTOS V7.4.1 - Copyright (C) 2013 Real Time Engineers Ltd.
* *
* FreeRTOS tutorial books are available in pdf and paperback. *
* Complete, revised, and edited pdf reference manuals are also *
* available. *
* *
* Purchasing FreeRTOS documentation will not only help you, by *
* ensuring you get running as quickly as possible and with an *
* in-depth knowledge of how to use FreeRTOS, it will also help *
* the FreeRTOS project to continue with its mission of providing *
* professional grade, cross platform, de facto standard solutions *
* for microcontrollers - completely free of charge! *
* *
* >>> See for details. <<< *
* *
* Thank you for using FreeRTOS, and thank you for your support! *
* *
This file is part of the FreeRTOS distribution.
FreeRTOS is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License (version 2) as published by the
Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
>>>>>>NOTE<<<<<< The modification to the GPL is included to allow you to
distribute a combined work that includes FreeRTOS without being obliged to
provide the source code for proprietary components outside of the FreeRTOS
FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
details. You should have received a copy of the GNU General Public License
and the FreeRTOS license exception along with FreeRTOS; if not it can be
viewed here: and also obtained by
writing to Real Time Engineers Ltd., contact details for whom are available
on the FreeRTOS WEB site.
1 tab == 4 spaces!
* *
* Having a problem? Start by reading the FAQ "My application does *
* not run, what could be wrong?" *
* *
* *
* *
*************************************************************************** - Documentation, books, training, latest versions,
license and Real Time Engineers Ltd. contact details. - A selection of FreeRTOS ecosystem products,
including FreeRTOS+Trace - an indispensable productivity tool, and our new
fully thread aware and reentrant UDP/IP stack. - Real Time Engineers ltd license FreeRTOS to High
Integrity Systems, who sell the code with commercial support,
indemnification and middleware, under the OpenRTOS brand. - High Integrity Systems also provide a safety
engineered and independently SIL3 certified version for use in safety and
mission critical applications that require provable dependability.
#include "FreeRTOSConfig.h"
#define portCONTEXT_SIZE 132
#define portEPC_STACK_LOCATION 124
.macro portSAVE_CONTEXT
/* Make room for the context. First save the current status so we can
manipulate it, and the cause and EPC registers so we capture their
original values in case of interrupt nesting. */
mfc0 k0, _CP0_CAUSE
addiu sp, sp, -portCONTEXT_SIZE
mfc0 k1, _CP0_STATUS
/* Also save s6 and s5 so we can use them during this interrupt. Any
nesting interrupts should maintain the values of these registers
across the ISR. */
sw s6, 44(sp)
sw s5, 40(sp)
/* Enable interrupts above the current priority. */
srl k0, k0, 0xa
ins k1, k0, 10, 6
ins k1, zero, 1, 4
/* s5 is used as the frame pointer. */
add s5, zero, sp
/* Check the nesting count value. */
la k0, uxInterruptNesting
lw s6, (k0)
/* If the nesting count is 0 then swap to the the system stack, otherwise
the system stack is already being used. */
bne s6, zero, .+20
/* Swap to the system stack. */
la sp, xISRStackTop
lw sp, (sp)
/* Increment and save the nesting count. */
addiu s6, s6, 1
sw s6, 0(k0)
/* s6 holds the EPC value, this is saved after interrupts are re-enabled. */
mfc0 s6, _CP0_EPC
/* Re-enable interrupts. */
mtc0 k1, _CP0_STATUS
/* Save the context into the space just created. s6 is saved again
here as it now contains the EPC value. No other s registers need be
saved. */
sw ra, 120(s5)
sw s8, 116(s5)
sw t9, 112(s5)
sw t8, 108(s5)
sw t7, 104(s5)
sw t6, 100(s5)
sw t5, 96(s5)
sw t4, 92(s5)
sw t3, 88(s5)
sw t2, 84(s5)
sw t1, 80(s5)
sw t0, 76(s5)
sw a3, 72(s5)
sw a2, 68(s5)
sw a1, 64(s5)
sw a0, 60(s5)
sw v1, 56(s5)
sw v0, 52(s5)
sw s6, portEPC_STACK_LOCATION(s5)
sw $1, 16(s5)
/* s6 is used as a scratch register. */
mfhi s6
sw s6, 12(s5)
mflo s6
sw s6, 8(s5)
/* Update the task stack pointer value if nesting is zero. */
la s6, uxInterruptNesting
lw s6, (s6)
addiu s6, s6, -1
bne s6, zero, .+20
/* Save the stack pointer. */
la s6, uxSavedTaskStackPointer
sw s5, (s6)
/* Restore the stack pointer from the TCB. This is only done if the
nesting count is 1. */
la s6, uxInterruptNesting
lw s6, (s6)
addiu s6, s6, -1
bne s6, zero, .+20
la s6, uxSavedTaskStackPointer
lw s5, (s6)
/* Restore the context. */
lw s6, 8(s5)
mtlo s6
lw s6, 12(s5)
mthi s6
lw $1, 16(s5)
/* s6 is loaded as it was used as a scratch register and therefore saved
as part of the interrupt context. */
lw s6, 44(s5)
lw v0, 52(s5)
lw v1, 56(s5)
lw a0, 60(s5)
lw a1, 64(s5)
lw a2, 68(s5)
lw a3, 72(s5)
lw t0, 76(s5)
lw t1, 80(s5)
lw t2, 84(s5)
lw t3, 88(s5)
lw t4, 92(s5)
lw t5, 96(s5)
lw t6, 100(s5)
lw t7, 104(s5)
lw t8, 108(s5)
lw t9, 112(s5)
lw s8, 116(s5)
lw ra, 120(s5)
/* Protect access to the k registers, and others. */
/* Decrement the nesting count. */
la k0, uxInterruptNesting
lw k1, (k0)
addiu k1, k1, -1
sw k1, 0(k0)
lw k1, portEPC_STACK_LOCATION(s5)
/* Leave the stack how we found it. First load sp from s5, then restore
s5 from the stack. */
add sp, zero, s5
lw s5, 40(sp)
addiu sp, sp, portCONTEXT_SIZE
mtc0 k0, _CP0_STATUS
mtc0 k1, _CP0_EPC