// ---------------------------------------------------------------------------- | |
// ATMEL Microcontroller Software Support - ROUSSET - | |
// ---------------------------------------------------------------------------- | |
// DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR | |
// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
// DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, | |
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, | |
// OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF | |
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING | |
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, | |
// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
// ---------------------------------------------------------------------------- | |
// File Name : AT91SAM7X128.h | |
// Object : AT91SAM7X128 definitions | |
// Generated : AT91 SW Application Group 05/20/2005 (16:22:23) | |
// | |
// CVS Reference : /AT91SAM7X128.pl/1.14/Tue May 10 12:12:05 2005// | |
// CVS Reference : /SYS_SAM7X.pl/1.3/Tue Feb 1 17:01:43 2005// | |
// CVS Reference : /MC_SAM7X.pl/1.2/Fri May 20 14:13:04 2005// | |
// CVS Reference : /PMC_SAM7X.pl/1.4/Tue Feb 8 13:58:10 2005// | |
// CVS Reference : /RSTC_SAM7X.pl/1.1/Tue Feb 1 16:16:26 2005// | |
// CVS Reference : /UDP_SAM7X.pl/1.1/Tue May 10 11:35:35 2005// | |
// CVS Reference : /PWM_SAM7X.pl/1.1/Tue May 10 11:53:07 2005// | |
// CVS Reference : /AIC_6075B.pl/1.3/Fri May 20 14:01:30 2005// | |
// CVS Reference : /PIO_6057A.pl/1.2/Thu Feb 3 10:18:28 2005// | |
// CVS Reference : /RTTC_6081A.pl/1.2/Tue Nov 9 14:43:58 2004// | |
// CVS Reference : /PITC_6079A.pl/1.2/Tue Nov 9 14:43:56 2004// | |
// CVS Reference : /WDTC_6080A.pl/1.3/Tue Nov 9 14:44:00 2004// | |
// CVS Reference : /VREG_6085B.pl/1.1/Tue Feb 1 16:05:48 2005// | |
// CVS Reference : /PDC_6074C.pl/1.2/Thu Feb 3 08:48:54 2005// | |
// CVS Reference : /DBGU_6059D.pl/1.1/Mon Jan 31 13:15:32 2005// | |
// CVS Reference : /SPI_6088D.pl/1.3/Fri May 20 14:08:59 2005// | |
// CVS Reference : /US_6089C.pl/1.1/Mon Jul 12 18:23:26 2004// | |
// CVS Reference : /SSC_6078A.pl/1.1/Tue Jul 13 07:45:40 2004// | |
// CVS Reference : /TWI_6061A.pl/1.1/Tue Jul 13 07:38:06 2004// | |
// CVS Reference : /TC_6082A.pl/1.7/Fri Mar 11 12:52:17 2005// | |
// CVS Reference : /CAN_6019B.pl/1.1/Tue Mar 8 12:42:22 2005// | |
// CVS Reference : /EMACB_6119A.pl/1.5/Thu Feb 3 15:52:04 2005// | |
// CVS Reference : /ADC_6051C.pl/1.1/Fri Oct 17 09:12:38 2003// | |
// CVS Reference : /AES_6149A.pl/1.10/Mon Feb 7 09:44:25 2005// | |
// CVS Reference : /DES3_6150A.pl/1.1/Mon Jan 17 08:34:31 2005// | |
// ---------------------------------------------------------------------------- | |
#ifndef AT91SAM7X128_H | |
#define AT91SAM7X128_H | |
typedef volatile unsigned int AT91_REG;// Hardware register definition | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR System Peripherals | |
// ***************************************************************************** | |
typedef struct _AT91S_SYS { | |
AT91_REG AIC_SMR[32]; // Source Mode Register | |
AT91_REG AIC_SVR[32]; // Source Vector Register | |
AT91_REG AIC_IVR; // IRQ Vector Register | |
AT91_REG AIC_FVR; // FIQ Vector Register | |
AT91_REG AIC_ISR; // Interrupt Status Register | |
AT91_REG AIC_IPR; // Interrupt Pending Register | |
AT91_REG AIC_IMR; // Interrupt Mask Register | |
AT91_REG AIC_CISR; // Core Interrupt Status Register | |
AT91_REG Reserved0[2]; // | |
AT91_REG AIC_IECR; // Interrupt Enable Command Register | |
AT91_REG AIC_IDCR; // Interrupt Disable Command Register | |
AT91_REG AIC_ICCR; // Interrupt Clear Command Register | |
AT91_REG AIC_ISCR; // Interrupt Set Command Register | |
AT91_REG AIC_EOICR; // End of Interrupt Command Register | |
AT91_REG AIC_SPU; // Spurious Vector Register | |
AT91_REG AIC_DCR; // Debug Control Register (Protect) | |
AT91_REG Reserved1[1]; // | |
AT91_REG AIC_FFER; // Fast Forcing Enable Register | |
AT91_REG AIC_FFDR; // Fast Forcing Disable Register | |
AT91_REG AIC_FFSR; // Fast Forcing Status Register | |
AT91_REG Reserved2[45]; // | |
AT91_REG DBGU_CR; // Control Register | |
AT91_REG DBGU_MR; // Mode Register | |
AT91_REG DBGU_IER; // Interrupt Enable Register | |
AT91_REG DBGU_IDR; // Interrupt Disable Register | |
AT91_REG DBGU_IMR; // Interrupt Mask Register | |
AT91_REG DBGU_CSR; // Channel Status Register | |
AT91_REG DBGU_RHR; // Receiver Holding Register | |
AT91_REG DBGU_THR; // Transmitter Holding Register | |
AT91_REG DBGU_BRGR; // Baud Rate Generator Register | |
AT91_REG Reserved3[7]; // | |
AT91_REG DBGU_CIDR; // Chip ID Register | |
AT91_REG DBGU_EXID; // Chip ID Extension Register | |
AT91_REG DBGU_FNTR; // Force NTRST Register | |
AT91_REG Reserved4[45]; // | |
AT91_REG DBGU_RPR; // Receive Pointer Register | |
AT91_REG DBGU_RCR; // Receive Counter Register | |
AT91_REG DBGU_TPR; // Transmit Pointer Register | |
AT91_REG DBGU_TCR; // Transmit Counter Register | |
AT91_REG DBGU_RNPR; // Receive Next Pointer Register | |
AT91_REG DBGU_RNCR; // Receive Next Counter Register | |
AT91_REG DBGU_TNPR; // Transmit Next Pointer Register | |
AT91_REG DBGU_TNCR; // Transmit Next Counter Register | |
AT91_REG DBGU_PTCR; // PDC Transfer Control Register | |
AT91_REG DBGU_PTSR; // PDC Transfer Status Register | |
AT91_REG Reserved5[54]; // | |
AT91_REG PIOA_PER; // PIO Enable Register | |
AT91_REG PIOA_PDR; // PIO Disable Register | |
AT91_REG PIOA_PSR; // PIO Status Register | |
AT91_REG Reserved6[1]; // | |
AT91_REG PIOA_OER; // Output Enable Register | |
AT91_REG PIOA_ODR; // Output Disable Registerr | |
AT91_REG PIOA_OSR; // Output Status Register | |
AT91_REG Reserved7[1]; // | |
AT91_REG PIOA_IFER; // Input Filter Enable Register | |
AT91_REG PIOA_IFDR; // Input Filter Disable Register | |
AT91_REG PIOA_IFSR; // Input Filter Status Register | |
AT91_REG Reserved8[1]; // | |
AT91_REG PIOA_SODR; // Set Output Data Register | |
AT91_REG PIOA_CODR; // Clear Output Data Register | |
AT91_REG PIOA_ODSR; // Output Data Status Register | |
AT91_REG PIOA_PDSR; // Pin Data Status Register | |
AT91_REG PIOA_IER; // Interrupt Enable Register | |
AT91_REG PIOA_IDR; // Interrupt Disable Register | |
AT91_REG PIOA_IMR; // Interrupt Mask Register | |
AT91_REG PIOA_ISR; // Interrupt Status Register | |
AT91_REG PIOA_MDER; // Multi-driver Enable Register | |
AT91_REG PIOA_MDDR; // Multi-driver Disable Register | |
AT91_REG PIOA_MDSR; // Multi-driver Status Register | |
AT91_REG Reserved9[1]; // | |
AT91_REG PIOA_PPUDR; // Pull-up Disable Register | |
AT91_REG PIOA_PPUER; // Pull-up Enable Register | |
AT91_REG PIOA_PPUSR; // Pull-up Status Register | |
AT91_REG Reserved10[1]; // | |
AT91_REG PIOA_ASR; // Select A Register | |
AT91_REG PIOA_BSR; // Select B Register | |
AT91_REG PIOA_ABSR; // AB Select Status Register | |
AT91_REG Reserved11[9]; // | |
AT91_REG PIOA_OWER; // Output Write Enable Register | |
AT91_REG PIOA_OWDR; // Output Write Disable Register | |
AT91_REG PIOA_OWSR; // Output Write Status Register | |
AT91_REG Reserved12[85]; // | |
AT91_REG PIOB_PER; // PIO Enable Register | |
AT91_REG PIOB_PDR; // PIO Disable Register | |
AT91_REG PIOB_PSR; // PIO Status Register | |
AT91_REG Reserved13[1]; // | |
AT91_REG PIOB_OER; // Output Enable Register | |
AT91_REG PIOB_ODR; // Output Disable Registerr | |
AT91_REG PIOB_OSR; // Output Status Register | |
AT91_REG Reserved14[1]; // | |
AT91_REG PIOB_IFER; // Input Filter Enable Register | |
AT91_REG PIOB_IFDR; // Input Filter Disable Register | |
AT91_REG PIOB_IFSR; // Input Filter Status Register | |
AT91_REG Reserved15[1]; // | |
AT91_REG PIOB_SODR; // Set Output Data Register | |
AT91_REG PIOB_CODR; // Clear Output Data Register | |
AT91_REG PIOB_ODSR; // Output Data Status Register | |
AT91_REG PIOB_PDSR; // Pin Data Status Register | |
AT91_REG PIOB_IER; // Interrupt Enable Register | |
AT91_REG PIOB_IDR; // Interrupt Disable Register | |
AT91_REG PIOB_IMR; // Interrupt Mask Register | |
AT91_REG PIOB_ISR; // Interrupt Status Register | |
AT91_REG PIOB_MDER; // Multi-driver Enable Register | |
AT91_REG PIOB_MDDR; // Multi-driver Disable Register | |
AT91_REG PIOB_MDSR; // Multi-driver Status Register | |
AT91_REG Reserved16[1]; // | |
AT91_REG PIOB_PPUDR; // Pull-up Disable Register | |
AT91_REG PIOB_PPUER; // Pull-up Enable Register | |
AT91_REG PIOB_PPUSR; // Pull-up Status Register | |
AT91_REG Reserved17[1]; // | |
AT91_REG PIOB_ASR; // Select A Register | |
AT91_REG PIOB_BSR; // Select B Register | |
AT91_REG PIOB_ABSR; // AB Select Status Register | |
AT91_REG Reserved18[9]; // | |
AT91_REG PIOB_OWER; // Output Write Enable Register | |
AT91_REG PIOB_OWDR; // Output Write Disable Register | |
AT91_REG PIOB_OWSR; // Output Write Status Register | |
AT91_REG Reserved19[341]; // | |
AT91_REG PMC_SCER; // System Clock Enable Register | |
AT91_REG PMC_SCDR; // System Clock Disable Register | |
AT91_REG PMC_SCSR; // System Clock Status Register | |
AT91_REG Reserved20[1]; // | |
AT91_REG PMC_PCER; // Peripheral Clock Enable Register | |
AT91_REG PMC_PCDR; // Peripheral Clock Disable Register | |
AT91_REG PMC_PCSR; // Peripheral Clock Status Register | |
AT91_REG Reserved21[1]; // | |
AT91_REG PMC_MOR; // Main Oscillator Register | |
AT91_REG PMC_MCFR; // Main Clock Frequency Register | |
AT91_REG Reserved22[1]; // | |
AT91_REG PMC_PLLR; // PLL Register | |
AT91_REG PMC_MCKR; // Master Clock Register | |
AT91_REG Reserved23[3]; // | |
AT91_REG PMC_PCKR[4]; // Programmable Clock Register | |
AT91_REG Reserved24[4]; // | |
AT91_REG PMC_IER; // Interrupt Enable Register | |
AT91_REG PMC_IDR; // Interrupt Disable Register | |
AT91_REG PMC_SR; // Status Register | |
AT91_REG PMC_IMR; // Interrupt Mask Register | |
AT91_REG Reserved25[36]; // | |
AT91_REG RSTC_RCR; // Reset Control Register | |
AT91_REG RSTC_RSR; // Reset Status Register | |
AT91_REG RSTC_RMR; // Reset Mode Register | |
AT91_REG Reserved26[5]; // | |
AT91_REG RTTC_RTMR; // Real-time Mode Register | |
AT91_REG RTTC_RTAR; // Real-time Alarm Register | |
AT91_REG RTTC_RTVR; // Real-time Value Register | |
AT91_REG RTTC_RTSR; // Real-time Status Register | |
AT91_REG PITC_PIMR; // Period Interval Mode Register | |
AT91_REG PITC_PISR; // Period Interval Status Register | |
AT91_REG PITC_PIVR; // Period Interval Value Register | |
AT91_REG PITC_PIIR; // Period Interval Image Register | |
AT91_REG WDTC_WDCR; // Watchdog Control Register | |
AT91_REG WDTC_WDMR; // Watchdog Mode Register | |
AT91_REG WDTC_WDSR; // Watchdog Status Register | |
AT91_REG Reserved27[5]; // | |
AT91_REG VREG_MR; // Voltage Regulator Mode Register | |
} AT91S_SYS, *AT91PS_SYS; | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Advanced Interrupt Controller | |
// ***************************************************************************** | |
typedef struct _AT91S_AIC { | |
AT91_REG AIC_SMR[32]; // Source Mode Register | |
AT91_REG AIC_SVR[32]; // Source Vector Register | |
AT91_REG AIC_IVR; // IRQ Vector Register | |
AT91_REG AIC_FVR; // FIQ Vector Register | |
AT91_REG AIC_ISR; // Interrupt Status Register | |
AT91_REG AIC_IPR; // Interrupt Pending Register | |
AT91_REG AIC_IMR; // Interrupt Mask Register | |
AT91_REG AIC_CISR; // Core Interrupt Status Register | |
AT91_REG Reserved0[2]; // | |
AT91_REG AIC_IECR; // Interrupt Enable Command Register | |
AT91_REG AIC_IDCR; // Interrupt Disable Command Register | |
AT91_REG AIC_ICCR; // Interrupt Clear Command Register | |
AT91_REG AIC_ISCR; // Interrupt Set Command Register | |
AT91_REG AIC_EOICR; // End of Interrupt Command Register | |
AT91_REG AIC_SPU; // Spurious Vector Register | |
AT91_REG AIC_DCR; // Debug Control Register (Protect) | |
AT91_REG Reserved1[1]; // | |
AT91_REG AIC_FFER; // Fast Forcing Enable Register | |
AT91_REG AIC_FFDR; // Fast Forcing Disable Register | |
AT91_REG AIC_FFSR; // Fast Forcing Status Register | |
} AT91S_AIC, *AT91PS_AIC; | |
// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- | |
#define AT91C_AIC_PRIOR ((unsigned int) 0x7 << 0) // (AIC) Priority Level | |
#define AT91C_AIC_PRIOR_LOWEST ((unsigned int) 0x0) // (AIC) Lowest priority level | |
#define AT91C_AIC_PRIOR_HIGHEST ((unsigned int) 0x7) // (AIC) Highest priority level | |
#define AT91C_AIC_SRCTYPE ((unsigned int) 0x3 << 5) // (AIC) Interrupt Source Type | |
#define AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL ((unsigned int) 0x0 << 5) // (AIC) Internal Sources Code Label High-level Sensitive | |
#define AT91C_AIC_SRCTYPE_EXT_LOW_LEVEL ((unsigned int) 0x0 << 5) // (AIC) External Sources Code Label Low-level Sensitive | |
#define AT91C_AIC_SRCTYPE_INT_POSITIVE_EDGE ((unsigned int) 0x1 << 5) // (AIC) Internal Sources Code Label Positive Edge triggered | |
#define AT91C_AIC_SRCTYPE_EXT_NEGATIVE_EDGE ((unsigned int) 0x1 << 5) // (AIC) External Sources Code Label Negative Edge triggered | |
#define AT91C_AIC_SRCTYPE_HIGH_LEVEL ((unsigned int) 0x2 << 5) // (AIC) Internal Or External Sources Code Label High-level Sensitive | |
#define AT91C_AIC_SRCTYPE_POSITIVE_EDGE ((unsigned int) 0x3 << 5) // (AIC) Internal Or External Sources Code Label Positive Edge triggered | |
// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- | |
#define AT91C_AIC_NFIQ ((unsigned int) 0x1 << 0) // (AIC) NFIQ Status | |
#define AT91C_AIC_NIRQ ((unsigned int) 0x1 << 1) // (AIC) NIRQ Status | |
// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- | |
#define AT91C_AIC_DCR_PROT ((unsigned int) 0x1 << 0) // (AIC) Protection Mode | |
#define AT91C_AIC_DCR_GMSK ((unsigned int) 0x1 << 1) // (AIC) General Mask | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Peripheral DMA Controller | |
// ***************************************************************************** | |
typedef struct _AT91S_PDC { | |
AT91_REG PDC_RPR; // Receive Pointer Register | |
AT91_REG PDC_RCR; // Receive Counter Register | |
AT91_REG PDC_TPR; // Transmit Pointer Register | |
AT91_REG PDC_TCR; // Transmit Counter Register | |
AT91_REG PDC_RNPR; // Receive Next Pointer Register | |
AT91_REG PDC_RNCR; // Receive Next Counter Register | |
AT91_REG PDC_TNPR; // Transmit Next Pointer Register | |
AT91_REG PDC_TNCR; // Transmit Next Counter Register | |
AT91_REG PDC_PTCR; // PDC Transfer Control Register | |
AT91_REG PDC_PTSR; // PDC Transfer Status Register | |
} AT91S_PDC, *AT91PS_PDC; | |
// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- | |
#define AT91C_PDC_RXTEN ((unsigned int) 0x1 << 0) // (PDC) Receiver Transfer Enable | |
#define AT91C_PDC_RXTDIS ((unsigned int) 0x1 << 1) // (PDC) Receiver Transfer Disable | |
#define AT91C_PDC_TXTEN ((unsigned int) 0x1 << 8) // (PDC) Transmitter Transfer Enable | |
#define AT91C_PDC_TXTDIS ((unsigned int) 0x1 << 9) // (PDC) Transmitter Transfer Disable | |
// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Debug Unit | |
// ***************************************************************************** | |
typedef struct _AT91S_DBGU { | |
AT91_REG DBGU_CR; // Control Register | |
AT91_REG DBGU_MR; // Mode Register | |
AT91_REG DBGU_IER; // Interrupt Enable Register | |
AT91_REG DBGU_IDR; // Interrupt Disable Register | |
AT91_REG DBGU_IMR; // Interrupt Mask Register | |
AT91_REG DBGU_CSR; // Channel Status Register | |
AT91_REG DBGU_RHR; // Receiver Holding Register | |
AT91_REG DBGU_THR; // Transmitter Holding Register | |
AT91_REG DBGU_BRGR; // Baud Rate Generator Register | |
AT91_REG Reserved0[7]; // | |
AT91_REG DBGU_CIDR; // Chip ID Register | |
AT91_REG DBGU_EXID; // Chip ID Extension Register | |
AT91_REG DBGU_FNTR; // Force NTRST Register | |
AT91_REG Reserved1[45]; // | |
AT91_REG DBGU_RPR; // Receive Pointer Register | |
AT91_REG DBGU_RCR; // Receive Counter Register | |
AT91_REG DBGU_TPR; // Transmit Pointer Register | |
AT91_REG DBGU_TCR; // Transmit Counter Register | |
AT91_REG DBGU_RNPR; // Receive Next Pointer Register | |
AT91_REG DBGU_RNCR; // Receive Next Counter Register | |
AT91_REG DBGU_TNPR; // Transmit Next Pointer Register | |
AT91_REG DBGU_TNCR; // Transmit Next Counter Register | |
AT91_REG DBGU_PTCR; // PDC Transfer Control Register | |
AT91_REG DBGU_PTSR; // PDC Transfer Status Register | |
} AT91S_DBGU, *AT91PS_DBGU; | |
// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- | |
#define AT91C_US_RSTRX ((unsigned int) 0x1 << 2) // (DBGU) Reset Receiver | |
#define AT91C_US_RSTTX ((unsigned int) 0x1 << 3) // (DBGU) Reset Transmitter | |
#define AT91C_US_RXEN ((unsigned int) 0x1 << 4) // (DBGU) Receiver Enable | |
#define AT91C_US_RXDIS ((unsigned int) 0x1 << 5) // (DBGU) Receiver Disable | |
#define AT91C_US_TXEN ((unsigned int) 0x1 << 6) // (DBGU) Transmitter Enable | |
#define AT91C_US_TXDIS ((unsigned int) 0x1 << 7) // (DBGU) Transmitter Disable | |
#define AT91C_US_RSTSTA ((unsigned int) 0x1 << 8) // (DBGU) Reset Status Bits | |
// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- | |
#define AT91C_US_PAR ((unsigned int) 0x7 << 9) // (DBGU) Parity type | |
#define AT91C_US_PAR_EVEN ((unsigned int) 0x0 << 9) // (DBGU) Even Parity | |
#define AT91C_US_PAR_ODD ((unsigned int) 0x1 << 9) // (DBGU) Odd Parity | |
#define AT91C_US_PAR_SPACE ((unsigned int) 0x2 << 9) // (DBGU) Parity forced to 0 (Space) | |
#define AT91C_US_PAR_MARK ((unsigned int) 0x3 << 9) // (DBGU) Parity forced to 1 (Mark) | |
#define AT91C_US_PAR_NONE ((unsigned int) 0x4 << 9) // (DBGU) No Parity | |
#define AT91C_US_PAR_MULTI_DROP ((unsigned int) 0x6 << 9) // (DBGU) Multi-drop mode | |
#define AT91C_US_CHMODE ((unsigned int) 0x3 << 14) // (DBGU) Channel Mode | |
#define AT91C_US_CHMODE_NORMAL ((unsigned int) 0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. | |
#define AT91C_US_CHMODE_AUTO ((unsigned int) 0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. | |
#define AT91C_US_CHMODE_LOCAL ((unsigned int) 0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. | |
#define AT91C_US_CHMODE_REMOTE ((unsigned int) 0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. | |
// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- | |
#define AT91C_US_RXRDY ((unsigned int) 0x1 << 0) // (DBGU) RXRDY Interrupt | |
#define AT91C_US_TXRDY ((unsigned int) 0x1 << 1) // (DBGU) TXRDY Interrupt | |
#define AT91C_US_ENDRX ((unsigned int) 0x1 << 3) // (DBGU) End of Receive Transfer Interrupt | |
#define AT91C_US_ENDTX ((unsigned int) 0x1 << 4) // (DBGU) End of Transmit Interrupt | |
#define AT91C_US_OVRE ((unsigned int) 0x1 << 5) // (DBGU) Overrun Interrupt | |
#define AT91C_US_FRAME ((unsigned int) 0x1 << 6) // (DBGU) Framing Error Interrupt | |
#define AT91C_US_PARE ((unsigned int) 0x1 << 7) // (DBGU) Parity Error Interrupt | |
#define AT91C_US_TXEMPTY ((unsigned int) 0x1 << 9) // (DBGU) TXEMPTY Interrupt | |
#define AT91C_US_TXBUFE ((unsigned int) 0x1 << 11) // (DBGU) TXBUFE Interrupt | |
#define AT91C_US_RXBUFF ((unsigned int) 0x1 << 12) // (DBGU) RXBUFF Interrupt | |
#define AT91C_US_COMM_TX ((unsigned int) 0x1 << 30) // (DBGU) COMM_TX Interrupt | |
#define AT91C_US_COMM_RX ((unsigned int) 0x1 << 31) // (DBGU) COMM_RX Interrupt | |
// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- | |
// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- | |
// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- | |
// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- | |
#define AT91C_US_FORCE_NTRST ((unsigned int) 0x1 << 0) // (DBGU) Force NTRST in JTAG | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Parallel Input Output Controler | |
// ***************************************************************************** | |
typedef struct _AT91S_PIO { | |
AT91_REG PIO_PER; // PIO Enable Register | |
AT91_REG PIO_PDR; // PIO Disable Register | |
AT91_REG PIO_PSR; // PIO Status Register | |
AT91_REG Reserved0[1]; // | |
AT91_REG PIO_OER; // Output Enable Register | |
AT91_REG PIO_ODR; // Output Disable Registerr | |
AT91_REG PIO_OSR; // Output Status Register | |
AT91_REG Reserved1[1]; // | |
AT91_REG PIO_IFER; // Input Filter Enable Register | |
AT91_REG PIO_IFDR; // Input Filter Disable Register | |
AT91_REG PIO_IFSR; // Input Filter Status Register | |
AT91_REG Reserved2[1]; // | |
AT91_REG PIO_SODR; // Set Output Data Register | |
AT91_REG PIO_CODR; // Clear Output Data Register | |
AT91_REG PIO_ODSR; // Output Data Status Register | |
AT91_REG PIO_PDSR; // Pin Data Status Register | |
AT91_REG PIO_IER; // Interrupt Enable Register | |
AT91_REG PIO_IDR; // Interrupt Disable Register | |
AT91_REG PIO_IMR; // Interrupt Mask Register | |
AT91_REG PIO_ISR; // Interrupt Status Register | |
AT91_REG PIO_MDER; // Multi-driver Enable Register | |
AT91_REG PIO_MDDR; // Multi-driver Disable Register | |
AT91_REG PIO_MDSR; // Multi-driver Status Register | |
AT91_REG Reserved3[1]; // | |
AT91_REG PIO_PPUDR; // Pull-up Disable Register | |
AT91_REG PIO_PPUER; // Pull-up Enable Register | |
AT91_REG PIO_PPUSR; // Pull-up Status Register | |
AT91_REG Reserved4[1]; // | |
AT91_REG PIO_ASR; // Select A Register | |
AT91_REG PIO_BSR; // Select B Register | |
AT91_REG PIO_ABSR; // AB Select Status Register | |
AT91_REG Reserved5[9]; // | |
AT91_REG PIO_OWER; // Output Write Enable Register | |
AT91_REG PIO_OWDR; // Output Write Disable Register | |
AT91_REG PIO_OWSR; // Output Write Status Register | |
} AT91S_PIO, *AT91PS_PIO; | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Clock Generator Controler | |
// ***************************************************************************** | |
typedef struct _AT91S_CKGR { | |
AT91_REG CKGR_MOR; // Main Oscillator Register | |
AT91_REG CKGR_MCFR; // Main Clock Frequency Register | |
AT91_REG Reserved0[1]; // | |
AT91_REG CKGR_PLLR; // PLL Register | |
} AT91S_CKGR, *AT91PS_CKGR; | |
// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- | |
#define AT91C_CKGR_MOSCEN ((unsigned int) 0x1 << 0) // (CKGR) Main Oscillator Enable | |
#define AT91C_CKGR_OSCBYPASS ((unsigned int) 0x1 << 1) // (CKGR) Main Oscillator Bypass | |
#define AT91C_CKGR_OSCOUNT ((unsigned int) 0xFF << 8) // (CKGR) Main Oscillator Start-up Time | |
// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- | |
#define AT91C_CKGR_MAINF ((unsigned int) 0xFFFF << 0) // (CKGR) Main Clock Frequency | |
#define AT91C_CKGR_MAINRDY ((unsigned int) 0x1 << 16) // (CKGR) Main Clock Ready | |
// -------- CKGR_PLLR : (CKGR Offset: 0xc) PLL B Register -------- | |
#define AT91C_CKGR_DIV ((unsigned int) 0xFF << 0) // (CKGR) Divider Selected | |
#define AT91C_CKGR_DIV_0 ((unsigned int) 0x0) // (CKGR) Divider output is 0 | |
#define AT91C_CKGR_DIV_BYPASS ((unsigned int) 0x1) // (CKGR) Divider is bypassed | |
#define AT91C_CKGR_PLLCOUNT ((unsigned int) 0x3F << 8) // (CKGR) PLL Counter | |
#define AT91C_CKGR_OUT ((unsigned int) 0x3 << 14) // (CKGR) PLL Output Frequency Range | |
#define AT91C_CKGR_OUT_0 ((unsigned int) 0x0 << 14) // (CKGR) Please refer to the PLL datasheet | |
#define AT91C_CKGR_OUT_1 ((unsigned int) 0x1 << 14) // (CKGR) Please refer to the PLL datasheet | |
#define AT91C_CKGR_OUT_2 ((unsigned int) 0x2 << 14) // (CKGR) Please refer to the PLL datasheet | |
#define AT91C_CKGR_OUT_3 ((unsigned int) 0x3 << 14) // (CKGR) Please refer to the PLL datasheet | |
#define AT91C_CKGR_MUL ((unsigned int) 0x7FF << 16) // (CKGR) PLL Multiplier | |
#define AT91C_CKGR_USBDIV ((unsigned int) 0x3 << 28) // (CKGR) Divider for USB Clocks | |
#define AT91C_CKGR_USBDIV_0 ((unsigned int) 0x0 << 28) // (CKGR) Divider output is PLL clock output | |
#define AT91C_CKGR_USBDIV_1 ((unsigned int) 0x1 << 28) // (CKGR) Divider output is PLL clock output divided by 2 | |
#define AT91C_CKGR_USBDIV_2 ((unsigned int) 0x2 << 28) // (CKGR) Divider output is PLL clock output divided by 4 | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Power Management Controler | |
// ***************************************************************************** | |
typedef struct _AT91S_PMC { | |
AT91_REG PMC_SCER; // System Clock Enable Register | |
AT91_REG PMC_SCDR; // System Clock Disable Register | |
AT91_REG PMC_SCSR; // System Clock Status Register | |
AT91_REG Reserved0[1]; // | |
AT91_REG PMC_PCER; // Peripheral Clock Enable Register | |
AT91_REG PMC_PCDR; // Peripheral Clock Disable Register | |
AT91_REG PMC_PCSR; // Peripheral Clock Status Register | |
AT91_REG Reserved1[1]; // | |
AT91_REG PMC_MOR; // Main Oscillator Register | |
AT91_REG PMC_MCFR; // Main Clock Frequency Register | |
AT91_REG Reserved2[1]; // | |
AT91_REG PMC_PLLR; // PLL Register | |
AT91_REG PMC_MCKR; // Master Clock Register | |
AT91_REG Reserved3[3]; // | |
AT91_REG PMC_PCKR[4]; // Programmable Clock Register | |
AT91_REG Reserved4[4]; // | |
AT91_REG PMC_IER; // Interrupt Enable Register | |
AT91_REG PMC_IDR; // Interrupt Disable Register | |
AT91_REG PMC_SR; // Status Register | |
AT91_REG PMC_IMR; // Interrupt Mask Register | |
} AT91S_PMC, *AT91PS_PMC; | |
// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- | |
#define AT91C_PMC_PCK ((unsigned int) 0x1 << 0) // (PMC) Processor Clock | |
#define AT91C_PMC_UDP ((unsigned int) 0x1 << 7) // (PMC) USB Device Port Clock | |
#define AT91C_PMC_PCK0 ((unsigned int) 0x1 << 8) // (PMC) Programmable Clock Output | |
#define AT91C_PMC_PCK1 ((unsigned int) 0x1 << 9) // (PMC) Programmable Clock Output | |
#define AT91C_PMC_PCK2 ((unsigned int) 0x1 << 10) // (PMC) Programmable Clock Output | |
#define AT91C_PMC_PCK3 ((unsigned int) 0x1 << 11) // (PMC) Programmable Clock Output | |
// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- | |
// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- | |
// -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register -------- | |
// -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register -------- | |
// -------- CKGR_PLLR : (PMC Offset: 0x2c) PLL B Register -------- | |
// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- | |
#define AT91C_PMC_CSS ((unsigned int) 0x3 << 0) // (PMC) Programmable Clock Selection | |
#define AT91C_PMC_CSS_SLOW_CLK ((unsigned int) 0x0) // (PMC) Slow Clock is selected | |
#define AT91C_PMC_CSS_MAIN_CLK ((unsigned int) 0x1) // (PMC) Main Clock is selected | |
#define AT91C_PMC_CSS_PLL_CLK ((unsigned int) 0x3) // (PMC) Clock from PLL is selected | |
#define AT91C_PMC_PRES ((unsigned int) 0x7 << 2) // (PMC) Programmable Clock Prescaler | |
#define AT91C_PMC_PRES_CLK ((unsigned int) 0x0 << 2) // (PMC) Selected clock | |
#define AT91C_PMC_PRES_CLK_2 ((unsigned int) 0x1 << 2) // (PMC) Selected clock divided by 2 | |
#define AT91C_PMC_PRES_CLK_4 ((unsigned int) 0x2 << 2) // (PMC) Selected clock divided by 4 | |
#define AT91C_PMC_PRES_CLK_8 ((unsigned int) 0x3 << 2) // (PMC) Selected clock divided by 8 | |
#define AT91C_PMC_PRES_CLK_16 ((unsigned int) 0x4 << 2) // (PMC) Selected clock divided by 16 | |
#define AT91C_PMC_PRES_CLK_32 ((unsigned int) 0x5 << 2) // (PMC) Selected clock divided by 32 | |
#define AT91C_PMC_PRES_CLK_64 ((unsigned int) 0x6 << 2) // (PMC) Selected clock divided by 64 | |
// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- | |
// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- | |
#define AT91C_PMC_MOSCS ((unsigned int) 0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask | |
#define AT91C_PMC_LOCK ((unsigned int) 0x1 << 2) // (PMC) PLL Status/Enable/Disable/Mask | |
#define AT91C_PMC_MCKRDY ((unsigned int) 0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask | |
#define AT91C_PMC_PCK0RDY ((unsigned int) 0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask | |
#define AT91C_PMC_PCK1RDY ((unsigned int) 0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask | |
#define AT91C_PMC_PCK2RDY ((unsigned int) 0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask | |
#define AT91C_PMC_PCK3RDY ((unsigned int) 0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask | |
// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- | |
// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- | |
// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Reset Controller Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_RSTC { | |
AT91_REG RSTC_RCR; // Reset Control Register | |
AT91_REG RSTC_RSR; // Reset Status Register | |
AT91_REG RSTC_RMR; // Reset Mode Register | |
} AT91S_RSTC, *AT91PS_RSTC; | |
// -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register -------- | |
#define AT91C_RSTC_PROCRST ((unsigned int) 0x1 << 0) // (RSTC) Processor Reset | |
#define AT91C_RSTC_PERRST ((unsigned int) 0x1 << 2) // (RSTC) Peripheral Reset | |
#define AT91C_RSTC_EXTRST ((unsigned int) 0x1 << 3) // (RSTC) External Reset | |
#define AT91C_RSTC_KEY ((unsigned int) 0xFF << 24) // (RSTC) Password | |
// -------- RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register -------- | |
#define AT91C_RSTC_URSTS ((unsigned int) 0x1 << 0) // (RSTC) User Reset Status | |
#define AT91C_RSTC_BODSTS ((unsigned int) 0x1 << 1) // (RSTC) Brownout Detection Status | |
#define AT91C_RSTC_RSTTYP ((unsigned int) 0x7 << 8) // (RSTC) Reset Type | |
#define AT91C_RSTC_RSTTYP_POWERUP ((unsigned int) 0x0 << 8) // (RSTC) Power-up Reset. VDDCORE rising. | |
#define AT91C_RSTC_RSTTYP_WAKEUP ((unsigned int) 0x1 << 8) // (RSTC) WakeUp Reset. VDDCORE rising. | |
#define AT91C_RSTC_RSTTYP_WATCHDOG ((unsigned int) 0x2 << 8) // (RSTC) Watchdog Reset. Watchdog overflow occured. | |
#define AT91C_RSTC_RSTTYP_SOFTWARE ((unsigned int) 0x3 << 8) // (RSTC) Software Reset. Processor reset required by the software. | |
#define AT91C_RSTC_RSTTYP_USER ((unsigned int) 0x4 << 8) // (RSTC) User Reset. NRST pin detected low. | |
#define AT91C_RSTC_RSTTYP_BROWNOUT ((unsigned int) 0x5 << 8) // (RSTC) Brownout Reset occured. | |
#define AT91C_RSTC_NRSTL ((unsigned int) 0x1 << 16) // (RSTC) NRST pin level | |
#define AT91C_RSTC_SRCMP ((unsigned int) 0x1 << 17) // (RSTC) Software Reset Command in Progress. | |
// -------- RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register -------- | |
#define AT91C_RSTC_URSTEN ((unsigned int) 0x1 << 0) // (RSTC) User Reset Enable | |
#define AT91C_RSTC_URSTIEN ((unsigned int) 0x1 << 4) // (RSTC) User Reset Interrupt Enable | |
#define AT91C_RSTC_ERSTL ((unsigned int) 0xF << 8) // (RSTC) User Reset Enable | |
#define AT91C_RSTC_BODIEN ((unsigned int) 0x1 << 16) // (RSTC) Brownout Detection Interrupt Enable | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Real Time Timer Controller Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_RTTC { | |
AT91_REG RTTC_RTMR; // Real-time Mode Register | |
AT91_REG RTTC_RTAR; // Real-time Alarm Register | |
AT91_REG RTTC_RTVR; // Real-time Value Register | |
AT91_REG RTTC_RTSR; // Real-time Status Register | |
} AT91S_RTTC, *AT91PS_RTTC; | |
// -------- RTTC_RTMR : (RTTC Offset: 0x0) Real-time Mode Register -------- | |
#define AT91C_RTTC_RTPRES ((unsigned int) 0xFFFF << 0) // (RTTC) Real-time Timer Prescaler Value | |
#define AT91C_RTTC_ALMIEN ((unsigned int) 0x1 << 16) // (RTTC) Alarm Interrupt Enable | |
#define AT91C_RTTC_RTTINCIEN ((unsigned int) 0x1 << 17) // (RTTC) Real Time Timer Increment Interrupt Enable | |
#define AT91C_RTTC_RTTRST ((unsigned int) 0x1 << 18) // (RTTC) Real Time Timer Restart | |
// -------- RTTC_RTAR : (RTTC Offset: 0x4) Real-time Alarm Register -------- | |
#define AT91C_RTTC_ALMV ((unsigned int) 0x0 << 0) // (RTTC) Alarm Value | |
// -------- RTTC_RTVR : (RTTC Offset: 0x8) Current Real-time Value Register -------- | |
#define AT91C_RTTC_CRTV ((unsigned int) 0x0 << 0) // (RTTC) Current Real-time Value | |
// -------- RTTC_RTSR : (RTTC Offset: 0xc) Real-time Status Register -------- | |
#define AT91C_RTTC_ALMS ((unsigned int) 0x1 << 0) // (RTTC) Real-time Alarm Status | |
#define AT91C_RTTC_RTTINC ((unsigned int) 0x1 << 1) // (RTTC) Real-time Timer Increment | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Periodic Interval Timer Controller Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_PITC { | |
AT91_REG PITC_PIMR; // Period Interval Mode Register | |
AT91_REG PITC_PISR; // Period Interval Status Register | |
AT91_REG PITC_PIVR; // Period Interval Value Register | |
AT91_REG PITC_PIIR; // Period Interval Image Register | |
} AT91S_PITC, *AT91PS_PITC; | |
// -------- PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register -------- | |
#define AT91C_PITC_PIV ((unsigned int) 0xFFFFF << 0) // (PITC) Periodic Interval Value | |
#define AT91C_PITC_PITEN ((unsigned int) 0x1 << 24) // (PITC) Periodic Interval Timer Enabled | |
#define AT91C_PITC_PITIEN ((unsigned int) 0x1 << 25) // (PITC) Periodic Interval Timer Interrupt Enable | |
// -------- PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register -------- | |
#define AT91C_PITC_PITS ((unsigned int) 0x1 << 0) // (PITC) Periodic Interval Timer Status | |
// -------- PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register -------- | |
#define AT91C_PITC_CPIV ((unsigned int) 0xFFFFF << 0) // (PITC) Current Periodic Interval Value | |
#define AT91C_PITC_PICNT ((unsigned int) 0xFFF << 20) // (PITC) Periodic Interval Counter | |
// -------- PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register -------- | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Watchdog Timer Controller Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_WDTC { | |
AT91_REG WDTC_WDCR; // Watchdog Control Register | |
AT91_REG WDTC_WDMR; // Watchdog Mode Register | |
AT91_REG WDTC_WDSR; // Watchdog Status Register | |
} AT91S_WDTC, *AT91PS_WDTC; | |
// -------- WDTC_WDCR : (WDTC Offset: 0x0) Periodic Interval Image Register -------- | |
#define AT91C_WDTC_WDRSTT ((unsigned int) 0x1 << 0) // (WDTC) Watchdog Restart | |
#define AT91C_WDTC_KEY ((unsigned int) 0xFF << 24) // (WDTC) Watchdog KEY Password | |
// -------- WDTC_WDMR : (WDTC Offset: 0x4) Watchdog Mode Register -------- | |
#define AT91C_WDTC_WDV ((unsigned int) 0xFFF << 0) // (WDTC) Watchdog Timer Restart | |
#define AT91C_WDTC_WDFIEN ((unsigned int) 0x1 << 12) // (WDTC) Watchdog Fault Interrupt Enable | |
#define AT91C_WDTC_WDRSTEN ((unsigned int) 0x1 << 13) // (WDTC) Watchdog Reset Enable | |
#define AT91C_WDTC_WDRPROC ((unsigned int) 0x1 << 14) // (WDTC) Watchdog Timer Restart | |
#define AT91C_WDTC_WDDIS ((unsigned int) 0x1 << 15) // (WDTC) Watchdog Disable | |
#define AT91C_WDTC_WDD ((unsigned int) 0xFFF << 16) // (WDTC) Watchdog Delta Value | |
#define AT91C_WDTC_WDDBGHLT ((unsigned int) 0x1 << 28) // (WDTC) Watchdog Debug Halt | |
#define AT91C_WDTC_WDIDLEHLT ((unsigned int) 0x1 << 29) // (WDTC) Watchdog Idle Halt | |
// -------- WDTC_WDSR : (WDTC Offset: 0x8) Watchdog Status Register -------- | |
#define AT91C_WDTC_WDUNF ((unsigned int) 0x1 << 0) // (WDTC) Watchdog Underflow | |
#define AT91C_WDTC_WDERR ((unsigned int) 0x1 << 1) // (WDTC) Watchdog Error | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Voltage Regulator Mode Controller Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_VREG { | |
AT91_REG VREG_MR; // Voltage Regulator Mode Register | |
} AT91S_VREG, *AT91PS_VREG; | |
// -------- VREG_MR : (VREG Offset: 0x0) Voltage Regulator Mode Register -------- | |
#define AT91C_VREG_PSTDBY ((unsigned int) 0x1 << 0) // (VREG) Voltage Regulator Power Standby Mode | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Memory Controller Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_MC { | |
AT91_REG MC_RCR; // MC Remap Control Register | |
AT91_REG MC_ASR; // MC Abort Status Register | |
AT91_REG MC_AASR; // MC Abort Address Status Register | |
AT91_REG Reserved0[21]; // | |
AT91_REG MC_FMR; // MC Flash Mode Register | |
AT91_REG MC_FCR; // MC Flash Command Register | |
AT91_REG MC_FSR; // MC Flash Status Register | |
} AT91S_MC, *AT91PS_MC; | |
// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- | |
#define AT91C_MC_RCB ((unsigned int) 0x1 << 0) // (MC) Remap Command Bit | |
// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- | |
#define AT91C_MC_UNDADD ((unsigned int) 0x1 << 0) // (MC) Undefined Addess Abort Status | |
#define AT91C_MC_MISADD ((unsigned int) 0x1 << 1) // (MC) Misaligned Addess Abort Status | |
#define AT91C_MC_ABTSZ ((unsigned int) 0x3 << 8) // (MC) Abort Size Status | |
#define AT91C_MC_ABTSZ_BYTE ((unsigned int) 0x0 << 8) // (MC) Byte | |
#define AT91C_MC_ABTSZ_HWORD ((unsigned int) 0x1 << 8) // (MC) Half-word | |
#define AT91C_MC_ABTSZ_WORD ((unsigned int) 0x2 << 8) // (MC) Word | |
#define AT91C_MC_ABTTYP ((unsigned int) 0x3 << 10) // (MC) Abort Type Status | |
#define AT91C_MC_ABTTYP_DATAR ((unsigned int) 0x0 << 10) // (MC) Data Read | |
#define AT91C_MC_ABTTYP_DATAW ((unsigned int) 0x1 << 10) // (MC) Data Write | |
#define AT91C_MC_ABTTYP_FETCH ((unsigned int) 0x2 << 10) // (MC) Code Fetch | |
#define AT91C_MC_MST0 ((unsigned int) 0x1 << 16) // (MC) Master 0 Abort Source | |
#define AT91C_MC_MST1 ((unsigned int) 0x1 << 17) // (MC) Master 1 Abort Source | |
#define AT91C_MC_SVMST0 ((unsigned int) 0x1 << 24) // (MC) Saved Master 0 Abort Source | |
#define AT91C_MC_SVMST1 ((unsigned int) 0x1 << 25) // (MC) Saved Master 1 Abort Source | |
// -------- MC_FMR : (MC Offset: 0x60) MC Flash Mode Register -------- | |
#define AT91C_MC_FRDY ((unsigned int) 0x1 << 0) // (MC) Flash Ready | |
#define AT91C_MC_LOCKE ((unsigned int) 0x1 << 2) // (MC) Lock Error | |
#define AT91C_MC_PROGE ((unsigned int) 0x1 << 3) // (MC) Programming Error | |
#define AT91C_MC_NEBP ((unsigned int) 0x1 << 7) // (MC) No Erase Before Programming | |
#define AT91C_MC_FWS ((unsigned int) 0x3 << 8) // (MC) Flash Wait State | |
#define AT91C_MC_FWS_0FWS ((unsigned int) 0x0 << 8) // (MC) 1 cycle for Read, 2 for Write operations | |
#define AT91C_MC_FWS_1FWS ((unsigned int) 0x1 << 8) // (MC) 2 cycles for Read, 3 for Write operations | |
#define AT91C_MC_FWS_2FWS ((unsigned int) 0x2 << 8) // (MC) 3 cycles for Read, 4 for Write operations | |
#define AT91C_MC_FWS_3FWS ((unsigned int) 0x3 << 8) // (MC) 4 cycles for Read, 4 for Write operations | |
#define AT91C_MC_FMCN ((unsigned int) 0xFF << 16) // (MC) Flash Microsecond Cycle Number | |
// -------- MC_FCR : (MC Offset: 0x64) MC Flash Command Register -------- | |
#define AT91C_MC_FCMD ((unsigned int) 0xF << 0) // (MC) Flash Command | |
#define AT91C_MC_FCMD_START_PROG ((unsigned int) 0x1) // (MC) Starts the programming of th epage specified by PAGEN. | |
#define AT91C_MC_FCMD_LOCK ((unsigned int) 0x2) // (MC) Starts a lock sequence of the sector defined by the bits 4 to 7 of the field PAGEN. | |
#define AT91C_MC_FCMD_PROG_AND_LOCK ((unsigned int) 0x3) // (MC) The lock sequence automatically happens after the programming sequence is completed. | |
#define AT91C_MC_FCMD_UNLOCK ((unsigned int) 0x4) // (MC) Starts an unlock sequence of the sector defined by the bits 4 to 7 of the field PAGEN. | |
#define AT91C_MC_FCMD_ERASE_ALL ((unsigned int) 0x8) // (MC) Starts the erase of the entire flash.If at least a page is locked, the command is cancelled. | |
#define AT91C_MC_FCMD_SET_GP_NVM ((unsigned int) 0xB) // (MC) Set General Purpose NVM bits. | |
#define AT91C_MC_FCMD_CLR_GP_NVM ((unsigned int) 0xD) // (MC) Clear General Purpose NVM bits. | |
#define AT91C_MC_FCMD_SET_SECURITY ((unsigned int) 0xF) // (MC) Set Security Bit. | |
#define AT91C_MC_PAGEN ((unsigned int) 0x3FF << 8) // (MC) Page Number | |
#define AT91C_MC_KEY ((unsigned int) 0xFF << 24) // (MC) Writing Protect Key | |
// -------- MC_FSR : (MC Offset: 0x68) MC Flash Command Register -------- | |
#define AT91C_MC_SECURITY ((unsigned int) 0x1 << 4) // (MC) Security Bit Status | |
#define AT91C_MC_GPNVM0 ((unsigned int) 0x1 << 8) // (MC) Sector 0 Lock Status | |
#define AT91C_MC_GPNVM1 ((unsigned int) 0x1 << 9) // (MC) Sector 1 Lock Status | |
#define AT91C_MC_GPNVM2 ((unsigned int) 0x1 << 10) // (MC) Sector 2 Lock Status | |
#define AT91C_MC_GPNVM3 ((unsigned int) 0x1 << 11) // (MC) Sector 3 Lock Status | |
#define AT91C_MC_GPNVM4 ((unsigned int) 0x1 << 12) // (MC) Sector 4 Lock Status | |
#define AT91C_MC_GPNVM5 ((unsigned int) 0x1 << 13) // (MC) Sector 5 Lock Status | |
#define AT91C_MC_GPNVM6 ((unsigned int) 0x1 << 14) // (MC) Sector 6 Lock Status | |
#define AT91C_MC_GPNVM7 ((unsigned int) 0x1 << 15) // (MC) Sector 7 Lock Status | |
#define AT91C_MC_LOCKS0 ((unsigned int) 0x1 << 16) // (MC) Sector 0 Lock Status | |
#define AT91C_MC_LOCKS1 ((unsigned int) 0x1 << 17) // (MC) Sector 1 Lock Status | |
#define AT91C_MC_LOCKS2 ((unsigned int) 0x1 << 18) // (MC) Sector 2 Lock Status | |
#define AT91C_MC_LOCKS3 ((unsigned int) 0x1 << 19) // (MC) Sector 3 Lock Status | |
#define AT91C_MC_LOCKS4 ((unsigned int) 0x1 << 20) // (MC) Sector 4 Lock Status | |
#define AT91C_MC_LOCKS5 ((unsigned int) 0x1 << 21) // (MC) Sector 5 Lock Status | |
#define AT91C_MC_LOCKS6 ((unsigned int) 0x1 << 22) // (MC) Sector 6 Lock Status | |
#define AT91C_MC_LOCKS7 ((unsigned int) 0x1 << 23) // (MC) Sector 7 Lock Status | |
#define AT91C_MC_LOCKS8 ((unsigned int) 0x1 << 24) // (MC) Sector 8 Lock Status | |
#define AT91C_MC_LOCKS9 ((unsigned int) 0x1 << 25) // (MC) Sector 9 Lock Status | |
#define AT91C_MC_LOCKS10 ((unsigned int) 0x1 << 26) // (MC) Sector 10 Lock Status | |
#define AT91C_MC_LOCKS11 ((unsigned int) 0x1 << 27) // (MC) Sector 11 Lock Status | |
#define AT91C_MC_LOCKS12 ((unsigned int) 0x1 << 28) // (MC) Sector 12 Lock Status | |
#define AT91C_MC_LOCKS13 ((unsigned int) 0x1 << 29) // (MC) Sector 13 Lock Status | |
#define AT91C_MC_LOCKS14 ((unsigned int) 0x1 << 30) // (MC) Sector 14 Lock Status | |
#define AT91C_MC_LOCKS15 ((unsigned int) 0x1 << 31) // (MC) Sector 15 Lock Status | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Serial Parallel Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_SPI { | |
AT91_REG SPI_CR; // Control Register | |
AT91_REG SPI_MR; // Mode Register | |
AT91_REG SPI_RDR; // Receive Data Register | |
AT91_REG SPI_TDR; // Transmit Data Register | |
AT91_REG SPI_SR; // Status Register | |
AT91_REG SPI_IER; // Interrupt Enable Register | |
AT91_REG SPI_IDR; // Interrupt Disable Register | |
AT91_REG SPI_IMR; // Interrupt Mask Register | |
AT91_REG Reserved0[4]; // | |
AT91_REG SPI_CSR[4]; // Chip Select Register | |
AT91_REG Reserved1[48]; // | |
AT91_REG SPI_RPR; // Receive Pointer Register | |
AT91_REG SPI_RCR; // Receive Counter Register | |
AT91_REG SPI_TPR; // Transmit Pointer Register | |
AT91_REG SPI_TCR; // Transmit Counter Register | |
AT91_REG SPI_RNPR; // Receive Next Pointer Register | |
AT91_REG SPI_RNCR; // Receive Next Counter Register | |
AT91_REG SPI_TNPR; // Transmit Next Pointer Register | |
AT91_REG SPI_TNCR; // Transmit Next Counter Register | |
AT91_REG SPI_PTCR; // PDC Transfer Control Register | |
AT91_REG SPI_PTSR; // PDC Transfer Status Register | |
} AT91S_SPI, *AT91PS_SPI; | |
// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- | |
#define AT91C_SPI_SPIEN ((unsigned int) 0x1 << 0) // (SPI) SPI Enable | |
#define AT91C_SPI_SPIDIS ((unsigned int) 0x1 << 1) // (SPI) SPI Disable | |
#define AT91C_SPI_SWRST ((unsigned int) 0x1 << 7) // (SPI) SPI Software reset | |
#define AT91C_SPI_LASTXFER ((unsigned int) 0x1 << 24) // (SPI) SPI Last Transfer | |
// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- | |
#define AT91C_SPI_MSTR ((unsigned int) 0x1 << 0) // (SPI) Master/Slave Mode | |
#define AT91C_SPI_PS ((unsigned int) 0x1 << 1) // (SPI) Peripheral Select | |
#define AT91C_SPI_PS_FIXED ((unsigned int) 0x0 << 1) // (SPI) Fixed Peripheral Select | |
#define AT91C_SPI_PS_VARIABLE ((unsigned int) 0x1 << 1) // (SPI) Variable Peripheral Select | |
#define AT91C_SPI_PCSDEC ((unsigned int) 0x1 << 2) // (SPI) Chip Select Decode | |
#define AT91C_SPI_FDIV ((unsigned int) 0x1 << 3) // (SPI) Clock Selection | |
#define AT91C_SPI_MODFDIS ((unsigned int) 0x1 << 4) // (SPI) Mode Fault Detection | |
#define AT91C_SPI_LLB ((unsigned int) 0x1 << 7) // (SPI) Clock Selection | |
#define AT91C_SPI_PCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select | |
#define AT91C_SPI_DLYBCS ((unsigned int) 0xFF << 24) // (SPI) Delay Between Chip Selects | |
// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- | |
#define AT91C_SPI_RD ((unsigned int) 0xFFFF << 0) // (SPI) Receive Data | |
#define AT91C_SPI_RPCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status | |
// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- | |
#define AT91C_SPI_TD ((unsigned int) 0xFFFF << 0) // (SPI) Transmit Data | |
#define AT91C_SPI_TPCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status | |
// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- | |
#define AT91C_SPI_RDRF ((unsigned int) 0x1 << 0) // (SPI) Receive Data Register Full | |
#define AT91C_SPI_TDRE ((unsigned int) 0x1 << 1) // (SPI) Transmit Data Register Empty | |
#define AT91C_SPI_MODF ((unsigned int) 0x1 << 2) // (SPI) Mode Fault Error | |
#define AT91C_SPI_OVRES ((unsigned int) 0x1 << 3) // (SPI) Overrun Error Status | |
#define AT91C_SPI_ENDRX ((unsigned int) 0x1 << 4) // (SPI) End of Receiver Transfer | |
#define AT91C_SPI_ENDTX ((unsigned int) 0x1 << 5) // (SPI) End of Receiver Transfer | |
#define AT91C_SPI_RXBUFF ((unsigned int) 0x1 << 6) // (SPI) RXBUFF Interrupt | |
#define AT91C_SPI_TXBUFE ((unsigned int) 0x1 << 7) // (SPI) TXBUFE Interrupt | |
#define AT91C_SPI_NSSR ((unsigned int) 0x1 << 8) // (SPI) NSSR Interrupt | |
#define AT91C_SPI_TXEMPTY ((unsigned int) 0x1 << 9) // (SPI) TXEMPTY Interrupt | |
#define AT91C_SPI_SPIENS ((unsigned int) 0x1 << 16) // (SPI) Enable Status | |
// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- | |
// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- | |
// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- | |
// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- | |
#define AT91C_SPI_CPOL ((unsigned int) 0x1 << 0) // (SPI) Clock Polarity | |
#define AT91C_SPI_NCPHA ((unsigned int) 0x1 << 1) // (SPI) Clock Phase | |
#define AT91C_SPI_CSAAT ((unsigned int) 0x1 << 3) // (SPI) Chip Select Active After Transfer | |
#define AT91C_SPI_BITS ((unsigned int) 0xF << 4) // (SPI) Bits Per Transfer | |
#define AT91C_SPI_BITS_8 ((unsigned int) 0x0 << 4) // (SPI) 8 Bits Per transfer | |
#define AT91C_SPI_BITS_9 ((unsigned int) 0x1 << 4) // (SPI) 9 Bits Per transfer | |
#define AT91C_SPI_BITS_10 ((unsigned int) 0x2 << 4) // (SPI) 10 Bits Per transfer | |
#define AT91C_SPI_BITS_11 ((unsigned int) 0x3 << 4) // (SPI) 11 Bits Per transfer | |
#define AT91C_SPI_BITS_12 ((unsigned int) 0x4 << 4) // (SPI) 12 Bits Per transfer | |
#define AT91C_SPI_BITS_13 ((unsigned int) 0x5 << 4) // (SPI) 13 Bits Per transfer | |
#define AT91C_SPI_BITS_14 ((unsigned int) 0x6 << 4) // (SPI) 14 Bits Per transfer | |
#define AT91C_SPI_BITS_15 ((unsigned int) 0x7 << 4) // (SPI) 15 Bits Per transfer | |
#define AT91C_SPI_BITS_16 ((unsigned int) 0x8 << 4) // (SPI) 16 Bits Per transfer | |
#define AT91C_SPI_SCBR ((unsigned int) 0xFF << 8) // (SPI) Serial Clock Baud Rate | |
#define AT91C_SPI_DLYBS ((unsigned int) 0xFF << 16) // (SPI) Delay Before SPCK | |
#define AT91C_SPI_DLYBCT ((unsigned int) 0xFF << 24) // (SPI) Delay Between Consecutive Transfers | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Usart | |
// ***************************************************************************** | |
typedef struct _AT91S_USART { | |
AT91_REG US_CR; // Control Register | |
AT91_REG US_MR; // Mode Register | |
AT91_REG US_IER; // Interrupt Enable Register | |
AT91_REG US_IDR; // Interrupt Disable Register | |
AT91_REG US_IMR; // Interrupt Mask Register | |
AT91_REG US_CSR; // Channel Status Register | |
AT91_REG US_RHR; // Receiver Holding Register | |
AT91_REG US_THR; // Transmitter Holding Register | |
AT91_REG US_BRGR; // Baud Rate Generator Register | |
AT91_REG US_RTOR; // Receiver Time-out Register | |
AT91_REG US_TTGR; // Transmitter Time-guard Register | |
AT91_REG Reserved0[5]; // | |
AT91_REG US_FIDI; // FI_DI_Ratio Register | |
AT91_REG US_NER; // Nb Errors Register | |
AT91_REG Reserved1[1]; // | |
AT91_REG US_IF; // IRDA_FILTER Register | |
AT91_REG Reserved2[44]; // | |
AT91_REG US_RPR; // Receive Pointer Register | |
AT91_REG US_RCR; // Receive Counter Register | |
AT91_REG US_TPR; // Transmit Pointer Register | |
AT91_REG US_TCR; // Transmit Counter Register | |
AT91_REG US_RNPR; // Receive Next Pointer Register | |
AT91_REG US_RNCR; // Receive Next Counter Register | |
AT91_REG US_TNPR; // Transmit Next Pointer Register | |
AT91_REG US_TNCR; // Transmit Next Counter Register | |
AT91_REG US_PTCR; // PDC Transfer Control Register | |
AT91_REG US_PTSR; // PDC Transfer Status Register | |
} AT91S_USART, *AT91PS_USART; | |
// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- | |
#define AT91C_US_STTBRK ((unsigned int) 0x1 << 9) // (USART) Start Break | |
#define AT91C_US_STPBRK ((unsigned int) 0x1 << 10) // (USART) Stop Break | |
#define AT91C_US_STTTO ((unsigned int) 0x1 << 11) // (USART) Start Time-out | |
#define AT91C_US_SENDA ((unsigned int) 0x1 << 12) // (USART) Send Address | |
#define AT91C_US_RSTIT ((unsigned int) 0x1 << 13) // (USART) Reset Iterations | |
#define AT91C_US_RSTNACK ((unsigned int) 0x1 << 14) // (USART) Reset Non Acknowledge | |
#define AT91C_US_RETTO ((unsigned int) 0x1 << 15) // (USART) Rearm Time-out | |
#define AT91C_US_DTREN ((unsigned int) 0x1 << 16) // (USART) Data Terminal ready Enable | |
#define AT91C_US_DTRDIS ((unsigned int) 0x1 << 17) // (USART) Data Terminal ready Disable | |
#define AT91C_US_RTSEN ((unsigned int) 0x1 << 18) // (USART) Request to Send enable | |
#define AT91C_US_RTSDIS ((unsigned int) 0x1 << 19) // (USART) Request to Send Disable | |
// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- | |
#define AT91C_US_USMODE ((unsigned int) 0xF << 0) // (USART) Usart mode | |
#define AT91C_US_USMODE_NORMAL ((unsigned int) 0x0) // (USART) Normal | |
#define AT91C_US_USMODE_RS485 ((unsigned int) 0x1) // (USART) RS485 | |
#define AT91C_US_USMODE_HWHSH ((unsigned int) 0x2) // (USART) Hardware Handshaking | |
#define AT91C_US_USMODE_MODEM ((unsigned int) 0x3) // (USART) Modem | |
#define AT91C_US_USMODE_ISO7816_0 ((unsigned int) 0x4) // (USART) ISO7816 protocol: T = 0 | |
#define AT91C_US_USMODE_ISO7816_1 ((unsigned int) 0x6) // (USART) ISO7816 protocol: T = 1 | |
#define AT91C_US_USMODE_IRDA ((unsigned int) 0x8) // (USART) IrDA | |
#define AT91C_US_USMODE_SWHSH ((unsigned int) 0xC) // (USART) Software Handshaking | |
#define AT91C_US_CLKS ((unsigned int) 0x3 << 4) // (USART) Clock Selection (Baud Rate generator Input Clock | |
#define AT91C_US_CLKS_CLOCK ((unsigned int) 0x0 << 4) // (USART) Clock | |
#define AT91C_US_CLKS_FDIV1 ((unsigned int) 0x1 << 4) // (USART) fdiv1 | |
#define AT91C_US_CLKS_SLOW ((unsigned int) 0x2 << 4) // (USART) slow_clock (ARM) | |
#define AT91C_US_CLKS_EXT ((unsigned int) 0x3 << 4) // (USART) External (SCK) | |
#define AT91C_US_CHRL ((unsigned int) 0x3 << 6) // (USART) Clock Selection (Baud Rate generator Input Clock | |
#define AT91C_US_CHRL_5_BITS ((unsigned int) 0x0 << 6) // (USART) Character Length: 5 bits | |
#define AT91C_US_CHRL_6_BITS ((unsigned int) 0x1 << 6) // (USART) Character Length: 6 bits | |
#define AT91C_US_CHRL_7_BITS ((unsigned int) 0x2 << 6) // (USART) Character Length: 7 bits | |
#define AT91C_US_CHRL_8_BITS ((unsigned int) 0x3 << 6) // (USART) Character Length: 8 bits | |
#define AT91C_US_SYNC ((unsigned int) 0x1 << 8) // (USART) Synchronous Mode Select | |
#define AT91C_US_NBSTOP ((unsigned int) 0x3 << 12) // (USART) Number of Stop bits | |
#define AT91C_US_NBSTOP_1_BIT ((unsigned int) 0x0 << 12) // (USART) 1 stop bit | |
#define AT91C_US_NBSTOP_15_BIT ((unsigned int) 0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits | |
#define AT91C_US_NBSTOP_2_BIT ((unsigned int) 0x2 << 12) // (USART) 2 stop bits | |
#define AT91C_US_MSBF ((unsigned int) 0x1 << 16) // (USART) Bit Order | |
#define AT91C_US_MODE9 ((unsigned int) 0x1 << 17) // (USART) 9-bit Character length | |
#define AT91C_US_CKLO ((unsigned int) 0x1 << 18) // (USART) Clock Output Select | |
#define AT91C_US_OVER ((unsigned int) 0x1 << 19) // (USART) Over Sampling Mode | |
#define AT91C_US_INACK ((unsigned int) 0x1 << 20) // (USART) Inhibit Non Acknowledge | |
#define AT91C_US_DSNACK ((unsigned int) 0x1 << 21) // (USART) Disable Successive NACK | |
#define AT91C_US_MAX_ITER ((unsigned int) 0x1 << 24) // (USART) Number of Repetitions | |
#define AT91C_US_FILTER ((unsigned int) 0x1 << 28) // (USART) Receive Line Filter | |
// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- | |
#define AT91C_US_RXBRK ((unsigned int) 0x1 << 2) // (USART) Break Received/End of Break | |
#define AT91C_US_TIMEOUT ((unsigned int) 0x1 << 8) // (USART) Receiver Time-out | |
#define AT91C_US_ITERATION ((unsigned int) 0x1 << 10) // (USART) Max number of Repetitions Reached | |
#define AT91C_US_NACK ((unsigned int) 0x1 << 13) // (USART) Non Acknowledge | |
#define AT91C_US_RIIC ((unsigned int) 0x1 << 16) // (USART) Ring INdicator Input Change Flag | |
#define AT91C_US_DSRIC ((unsigned int) 0x1 << 17) // (USART) Data Set Ready Input Change Flag | |
#define AT91C_US_DCDIC ((unsigned int) 0x1 << 18) // (USART) Data Carrier Flag | |
#define AT91C_US_CTSIC ((unsigned int) 0x1 << 19) // (USART) Clear To Send Input Change Flag | |
// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- | |
// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- | |
// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- | |
#define AT91C_US_RI ((unsigned int) 0x1 << 20) // (USART) Image of RI Input | |
#define AT91C_US_DSR ((unsigned int) 0x1 << 21) // (USART) Image of DSR Input | |
#define AT91C_US_DCD ((unsigned int) 0x1 << 22) // (USART) Image of DCD Input | |
#define AT91C_US_CTS ((unsigned int) 0x1 << 23) // (USART) Image of CTS Input | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_SSC { | |
AT91_REG SSC_CR; // Control Register | |
AT91_REG SSC_CMR; // Clock Mode Register | |
AT91_REG Reserved0[2]; // | |
AT91_REG SSC_RCMR; // Receive Clock ModeRegister | |
AT91_REG SSC_RFMR; // Receive Frame Mode Register | |
AT91_REG SSC_TCMR; // Transmit Clock Mode Register | |
AT91_REG SSC_TFMR; // Transmit Frame Mode Register | |
AT91_REG SSC_RHR; // Receive Holding Register | |
AT91_REG SSC_THR; // Transmit Holding Register | |
AT91_REG Reserved1[2]; // | |
AT91_REG SSC_RSHR; // Receive Sync Holding Register | |
AT91_REG SSC_TSHR; // Transmit Sync Holding Register | |
AT91_REG Reserved2[2]; // | |
AT91_REG SSC_SR; // Status Register | |
AT91_REG SSC_IER; // Interrupt Enable Register | |
AT91_REG SSC_IDR; // Interrupt Disable Register | |
AT91_REG SSC_IMR; // Interrupt Mask Register | |
AT91_REG Reserved3[44]; // | |
AT91_REG SSC_RPR; // Receive Pointer Register | |
AT91_REG SSC_RCR; // Receive Counter Register | |
AT91_REG SSC_TPR; // Transmit Pointer Register | |
AT91_REG SSC_TCR; // Transmit Counter Register | |
AT91_REG SSC_RNPR; // Receive Next Pointer Register | |
AT91_REG SSC_RNCR; // Receive Next Counter Register | |
AT91_REG SSC_TNPR; // Transmit Next Pointer Register | |
AT91_REG SSC_TNCR; // Transmit Next Counter Register | |
AT91_REG SSC_PTCR; // PDC Transfer Control Register | |
AT91_REG SSC_PTSR; // PDC Transfer Status Register | |
} AT91S_SSC, *AT91PS_SSC; | |
// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- | |
#define AT91C_SSC_RXEN ((unsigned int) 0x1 << 0) // (SSC) Receive Enable | |
#define AT91C_SSC_RXDIS ((unsigned int) 0x1 << 1) // (SSC) Receive Disable | |
#define AT91C_SSC_TXEN ((unsigned int) 0x1 << 8) // (SSC) Transmit Enable | |
#define AT91C_SSC_TXDIS ((unsigned int) 0x1 << 9) // (SSC) Transmit Disable | |
#define AT91C_SSC_SWRST ((unsigned int) 0x1 << 15) // (SSC) Software Reset | |
// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- | |
#define AT91C_SSC_CKS ((unsigned int) 0x3 << 0) // (SSC) Receive/Transmit Clock Selection | |
#define AT91C_SSC_CKS_DIV ((unsigned int) 0x0) // (SSC) Divided Clock | |
#define AT91C_SSC_CKS_TK ((unsigned int) 0x1) // (SSC) TK Clock signal | |
#define AT91C_SSC_CKS_RK ((unsigned int) 0x2) // (SSC) RK pin | |
#define AT91C_SSC_CKO ((unsigned int) 0x7 << 2) // (SSC) Receive/Transmit Clock Output Mode Selection | |
#define AT91C_SSC_CKO_NONE ((unsigned int) 0x0 << 2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only | |
#define AT91C_SSC_CKO_CONTINOUS ((unsigned int) 0x1 << 2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output | |
#define AT91C_SSC_CKO_DATA_TX ((unsigned int) 0x2 << 2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output | |
#define AT91C_SSC_CKI ((unsigned int) 0x1 << 5) // (SSC) Receive/Transmit Clock Inversion | |
#define AT91C_SSC_START ((unsigned int) 0xF << 8) // (SSC) Receive/Transmit Start Selection | |
#define AT91C_SSC_START_CONTINOUS ((unsigned int) 0x0 << 8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. | |
#define AT91C_SSC_START_TX ((unsigned int) 0x1 << 8) // (SSC) Transmit/Receive start | |
#define AT91C_SSC_START_LOW_RF ((unsigned int) 0x2 << 8) // (SSC) Detection of a low level on RF input | |
#define AT91C_SSC_START_HIGH_RF ((unsigned int) 0x3 << 8) // (SSC) Detection of a high level on RF input | |
#define AT91C_SSC_START_FALL_RF ((unsigned int) 0x4 << 8) // (SSC) Detection of a falling edge on RF input | |
#define AT91C_SSC_START_RISE_RF ((unsigned int) 0x5 << 8) // (SSC) Detection of a rising edge on RF input | |
#define AT91C_SSC_START_LEVEL_RF ((unsigned int) 0x6 << 8) // (SSC) Detection of any level change on RF input | |
#define AT91C_SSC_START_EDGE_RF ((unsigned int) 0x7 << 8) // (SSC) Detection of any edge on RF input | |
#define AT91C_SSC_START_0 ((unsigned int) 0x8 << 8) // (SSC) Compare 0 | |
#define AT91C_SSC_STTDLY ((unsigned int) 0xFF << 16) // (SSC) Receive/Transmit Start Delay | |
#define AT91C_SSC_PERIOD ((unsigned int) 0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection | |
// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- | |
#define AT91C_SSC_DATLEN ((unsigned int) 0x1F << 0) // (SSC) Data Length | |
#define AT91C_SSC_LOOP ((unsigned int) 0x1 << 5) // (SSC) Loop Mode | |
#define AT91C_SSC_MSBF ((unsigned int) 0x1 << 7) // (SSC) Most Significant Bit First | |
#define AT91C_SSC_DATNB ((unsigned int) 0xF << 8) // (SSC) Data Number per Frame | |
#define AT91C_SSC_FSLEN ((unsigned int) 0xF << 16) // (SSC) Receive/Transmit Frame Sync length | |
#define AT91C_SSC_FSOS ((unsigned int) 0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection | |
#define AT91C_SSC_FSOS_NONE ((unsigned int) 0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only | |
#define AT91C_SSC_FSOS_NEGATIVE ((unsigned int) 0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse | |
#define AT91C_SSC_FSOS_POSITIVE ((unsigned int) 0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse | |
#define AT91C_SSC_FSOS_LOW ((unsigned int) 0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer | |
#define AT91C_SSC_FSOS_HIGH ((unsigned int) 0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer | |
#define AT91C_SSC_FSOS_TOGGLE ((unsigned int) 0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer | |
#define AT91C_SSC_FSEDGE ((unsigned int) 0x1 << 24) // (SSC) Frame Sync Edge Detection | |
// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- | |
// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- | |
#define AT91C_SSC_DATDEF ((unsigned int) 0x1 << 5) // (SSC) Data Default Value | |
#define AT91C_SSC_FSDEN ((unsigned int) 0x1 << 23) // (SSC) Frame Sync Data Enable | |
// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- | |
#define AT91C_SSC_TXRDY ((unsigned int) 0x1 << 0) // (SSC) Transmit Ready | |
#define AT91C_SSC_TXEMPTY ((unsigned int) 0x1 << 1) // (SSC) Transmit Empty | |
#define AT91C_SSC_ENDTX ((unsigned int) 0x1 << 2) // (SSC) End Of Transmission | |
#define AT91C_SSC_TXBUFE ((unsigned int) 0x1 << 3) // (SSC) Transmit Buffer Empty | |
#define AT91C_SSC_RXRDY ((unsigned int) 0x1 << 4) // (SSC) Receive Ready | |
#define AT91C_SSC_OVRUN ((unsigned int) 0x1 << 5) // (SSC) Receive Overrun | |
#define AT91C_SSC_ENDRX ((unsigned int) 0x1 << 6) // (SSC) End of Reception | |
#define AT91C_SSC_RXBUFF ((unsigned int) 0x1 << 7) // (SSC) Receive Buffer Full | |
#define AT91C_SSC_TXSYN ((unsigned int) 0x1 << 10) // (SSC) Transmit Sync | |
#define AT91C_SSC_RXSYN ((unsigned int) 0x1 << 11) // (SSC) Receive Sync | |
#define AT91C_SSC_TXENA ((unsigned int) 0x1 << 16) // (SSC) Transmit Enable | |
#define AT91C_SSC_RXENA ((unsigned int) 0x1 << 17) // (SSC) Receive Enable | |
// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- | |
// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- | |
// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Two-wire Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_TWI { | |
AT91_REG TWI_CR; // Control Register | |
AT91_REG TWI_MMR; // Master Mode Register | |
AT91_REG Reserved0[1]; // | |
AT91_REG TWI_IADR; // Internal Address Register | |
AT91_REG TWI_CWGR; // Clock Waveform Generator Register | |
AT91_REG Reserved1[3]; // | |
AT91_REG TWI_SR; // Status Register | |
AT91_REG TWI_IER; // Interrupt Enable Register | |
AT91_REG TWI_IDR; // Interrupt Disable Register | |
AT91_REG TWI_IMR; // Interrupt Mask Register | |
AT91_REG TWI_RHR; // Receive Holding Register | |
AT91_REG TWI_THR; // Transmit Holding Register | |
} AT91S_TWI, *AT91PS_TWI; | |
// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- | |
#define AT91C_TWI_START ((unsigned int) 0x1 << 0) // (TWI) Send a START Condition | |
#define AT91C_TWI_STOP ((unsigned int) 0x1 << 1) // (TWI) Send a STOP Condition | |
#define AT91C_TWI_MSEN ((unsigned int) 0x1 << 2) // (TWI) TWI Master Transfer Enabled | |
#define AT91C_TWI_MSDIS ((unsigned int) 0x1 << 3) // (TWI) TWI Master Transfer Disabled | |
#define AT91C_TWI_SWRST ((unsigned int) 0x1 << 7) // (TWI) Software Reset | |
// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- | |
#define AT91C_TWI_IADRSZ ((unsigned int) 0x3 << 8) // (TWI) Internal Device Address Size | |
#define AT91C_TWI_IADRSZ_NO ((unsigned int) 0x0 << 8) // (TWI) No internal device address | |
#define AT91C_TWI_IADRSZ_1_BYTE ((unsigned int) 0x1 << 8) // (TWI) One-byte internal device address | |
#define AT91C_TWI_IADRSZ_2_BYTE ((unsigned int) 0x2 << 8) // (TWI) Two-byte internal device address | |
#define AT91C_TWI_IADRSZ_3_BYTE ((unsigned int) 0x3 << 8) // (TWI) Three-byte internal device address | |
#define AT91C_TWI_MREAD ((unsigned int) 0x1 << 12) // (TWI) Master Read Direction | |
#define AT91C_TWI_DADR ((unsigned int) 0x7F << 16) // (TWI) Device Address | |
// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- | |
#define AT91C_TWI_CLDIV ((unsigned int) 0xFF << 0) // (TWI) Clock Low Divider | |
#define AT91C_TWI_CHDIV ((unsigned int) 0xFF << 8) // (TWI) Clock High Divider | |
#define AT91C_TWI_CKDIV ((unsigned int) 0x7 << 16) // (TWI) Clock Divider | |
// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- | |
#define AT91C_TWI_TXCOMP ((unsigned int) 0x1 << 0) // (TWI) Transmission Completed | |
#define AT91C_TWI_RXRDY ((unsigned int) 0x1 << 1) // (TWI) Receive holding register ReaDY | |
#define AT91C_TWI_TXRDY ((unsigned int) 0x1 << 2) // (TWI) Transmit holding register ReaDY | |
#define AT91C_TWI_OVRE ((unsigned int) 0x1 << 6) // (TWI) Overrun Error | |
#define AT91C_TWI_UNRE ((unsigned int) 0x1 << 7) // (TWI) Underrun Error | |
#define AT91C_TWI_NACK ((unsigned int) 0x1 << 8) // (TWI) Not Acknowledged | |
// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- | |
// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- | |
// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR PWMC Channel Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_PWMC_CH { | |
AT91_REG PWMC_CMR; // Channel Mode Register | |
AT91_REG PWMC_CDTYR; // Channel Duty Cycle Register | |
AT91_REG PWMC_CPRDR; // Channel Period Register | |
AT91_REG PWMC_CCNTR; // Channel Counter Register | |
AT91_REG PWMC_CUPDR; // Channel Update Register | |
AT91_REG PWMC_Reserved[3]; // Reserved | |
} AT91S_PWMC_CH, *AT91PS_PWMC_CH; | |
// -------- PWMC_CMR : (PWMC_CH Offset: 0x0) PWMC Channel Mode Register -------- | |
#define AT91C_PWMC_CPRE ((unsigned int) 0xF << 0) // (PWMC_CH) Channel Pre-scaler : PWMC_CLKx | |
#define AT91C_PWMC_CPRE_MCK ((unsigned int) 0x0) // (PWMC_CH) | |
#define AT91C_PWMC_CPRE_MCKA ((unsigned int) 0xB) // (PWMC_CH) | |
#define AT91C_PWMC_CPRE_MCKB ((unsigned int) 0xC) // (PWMC_CH) | |
#define AT91C_PWMC_CALG ((unsigned int) 0x1 << 8) // (PWMC_CH) Channel Alignment | |
#define AT91C_PWMC_CPOL ((unsigned int) 0x1 << 9) // (PWMC_CH) Channel Polarity | |
#define AT91C_PWMC_CPD ((unsigned int) 0x1 << 10) // (PWMC_CH) Channel Update Period | |
// -------- PWMC_CDTYR : (PWMC_CH Offset: 0x4) PWMC Channel Duty Cycle Register -------- | |
#define AT91C_PWMC_CDTY ((unsigned int) 0x0 << 0) // (PWMC_CH) Channel Duty Cycle | |
// -------- PWMC_CPRDR : (PWMC_CH Offset: 0x8) PWMC Channel Period Register -------- | |
#define AT91C_PWMC_CPRD ((unsigned int) 0x0 << 0) // (PWMC_CH) Channel Period | |
// -------- PWMC_CCNTR : (PWMC_CH Offset: 0xc) PWMC Channel Counter Register -------- | |
#define AT91C_PWMC_CCNT ((unsigned int) 0x0 << 0) // (PWMC_CH) Channel Counter | |
// -------- PWMC_CUPDR : (PWMC_CH Offset: 0x10) PWMC Channel Update Register -------- | |
#define AT91C_PWMC_CUPD ((unsigned int) 0x0 << 0) // (PWMC_CH) Channel Update | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Pulse Width Modulation Controller Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_PWMC { | |
AT91_REG PWMC_MR; // PWMC Mode Register | |
AT91_REG PWMC_ENA; // PWMC Enable Register | |
AT91_REG PWMC_DIS; // PWMC Disable Register | |
AT91_REG PWMC_SR; // PWMC Status Register | |
AT91_REG PWMC_IER; // PWMC Interrupt Enable Register | |
AT91_REG PWMC_IDR; // PWMC Interrupt Disable Register | |
AT91_REG PWMC_IMR; // PWMC Interrupt Mask Register | |
AT91_REG PWMC_ISR; // PWMC Interrupt Status Register | |
AT91_REG Reserved0[55]; // | |
AT91_REG PWMC_VR; // PWMC Version Register | |
AT91_REG Reserved1[64]; // | |
AT91S_PWMC_CH PWMC_CH[4]; // PWMC Channel | |
} AT91S_PWMC, *AT91PS_PWMC; | |
// -------- PWMC_MR : (PWMC Offset: 0x0) PWMC Mode Register -------- | |
#define AT91C_PWMC_DIVA ((unsigned int) 0xFF << 0) // (PWMC) CLKA divide factor. | |
#define AT91C_PWMC_PREA ((unsigned int) 0xF << 8) // (PWMC) Divider Input Clock Prescaler A | |
#define AT91C_PWMC_PREA_MCK ((unsigned int) 0x0 << 8) // (PWMC) | |
#define AT91C_PWMC_DIVB ((unsigned int) 0xFF << 16) // (PWMC) CLKB divide factor. | |
#define AT91C_PWMC_PREB ((unsigned int) 0xF << 24) // (PWMC) Divider Input Clock Prescaler B | |
#define AT91C_PWMC_PREB_MCK ((unsigned int) 0x0 << 24) // (PWMC) | |
// -------- PWMC_ENA : (PWMC Offset: 0x4) PWMC Enable Register -------- | |
#define AT91C_PWMC_CHID0 ((unsigned int) 0x1 << 0) // (PWMC) Channel ID 0 | |
#define AT91C_PWMC_CHID1 ((unsigned int) 0x1 << 1) // (PWMC) Channel ID 1 | |
#define AT91C_PWMC_CHID2 ((unsigned int) 0x1 << 2) // (PWMC) Channel ID 2 | |
#define AT91C_PWMC_CHID3 ((unsigned int) 0x1 << 3) // (PWMC) Channel ID 3 | |
// -------- PWMC_DIS : (PWMC Offset: 0x8) PWMC Disable Register -------- | |
// -------- PWMC_SR : (PWMC Offset: 0xc) PWMC Status Register -------- | |
// -------- PWMC_IER : (PWMC Offset: 0x10) PWMC Interrupt Enable Register -------- | |
// -------- PWMC_IDR : (PWMC Offset: 0x14) PWMC Interrupt Disable Register -------- | |
// -------- PWMC_IMR : (PWMC Offset: 0x18) PWMC Interrupt Mask Register -------- | |
// -------- PWMC_ISR : (PWMC Offset: 0x1c) PWMC Interrupt Status Register -------- | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR USB Device Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_UDP { | |
AT91_REG UDP_NUM; // Frame Number Register | |
AT91_REG UDP_GLBSTATE; // Global State Register | |
AT91_REG UDP_FADDR; // Function Address Register | |
AT91_REG Reserved0[1]; // | |
AT91_REG UDP_IER; // Interrupt Enable Register | |
AT91_REG UDP_IDR; // Interrupt Disable Register | |
AT91_REG UDP_IMR; // Interrupt Mask Register | |
AT91_REG UDP_ISR; // Interrupt Status Register | |
AT91_REG UDP_ICR; // Interrupt Clear Register | |
AT91_REG Reserved1[1]; // | |
AT91_REG UDP_RSTEP; // Reset Endpoint Register | |
AT91_REG Reserved2[1]; // | |
AT91_REG UDP_CSR[6]; // Endpoint Control and Status Register | |
AT91_REG Reserved3[2]; // | |
AT91_REG UDP_FDR[6]; // Endpoint FIFO Data Register | |
AT91_REG Reserved4[3]; // | |
AT91_REG UDP_TXVC; // Transceiver Control Register | |
} AT91S_UDP, *AT91PS_UDP; | |
// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- | |
#define AT91C_UDP_FRM_NUM ((unsigned int) 0x7FF << 0) // (UDP) Frame Number as Defined in the Packet Field Formats | |
#define AT91C_UDP_FRM_ERR ((unsigned int) 0x1 << 16) // (UDP) Frame Error | |
#define AT91C_UDP_FRM_OK ((unsigned int) 0x1 << 17) // (UDP) Frame OK | |
// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- | |
#define AT91C_UDP_FADDEN ((unsigned int) 0x1 << 0) // (UDP) Function Address Enable | |
#define AT91C_UDP_CONFG ((unsigned int) 0x1 << 1) // (UDP) Configured | |
#define AT91C_UDP_ESR ((unsigned int) 0x1 << 2) // (UDP) Enable Send Resume | |
#define AT91C_UDP_RSMINPR ((unsigned int) 0x1 << 3) // (UDP) A Resume Has Been Sent to the Host | |
#define AT91C_UDP_RMWUPE ((unsigned int) 0x1 << 4) // (UDP) Remote Wake Up Enable | |
// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- | |
#define AT91C_UDP_FADD ((unsigned int) 0xFF << 0) // (UDP) Function Address Value | |
#define AT91C_UDP_FEN ((unsigned int) 0x1 << 8) // (UDP) Function Enable | |
// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- | |
#define AT91C_UDP_EPINT0 ((unsigned int) 0x1 << 0) // (UDP) Endpoint 0 Interrupt | |
#define AT91C_UDP_EPINT1 ((unsigned int) 0x1 << 1) // (UDP) Endpoint 0 Interrupt | |
#define AT91C_UDP_EPINT2 ((unsigned int) 0x1 << 2) // (UDP) Endpoint 2 Interrupt | |
#define AT91C_UDP_EPINT3 ((unsigned int) 0x1 << 3) // (UDP) Endpoint 3 Interrupt | |
#define AT91C_UDP_EPINT4 ((unsigned int) 0x1 << 4) // (UDP) Endpoint 4 Interrupt | |
#define AT91C_UDP_EPINT5 ((unsigned int) 0x1 << 5) // (UDP) Endpoint 5 Interrupt | |
#define AT91C_UDP_RXSUSP ((unsigned int) 0x1 << 8) // (UDP) USB Suspend Interrupt | |
#define AT91C_UDP_RXRSM ((unsigned int) 0x1 << 9) // (UDP) USB Resume Interrupt | |
#define AT91C_UDP_EXTRSM ((unsigned int) 0x1 << 10) // (UDP) USB External Resume Interrupt | |
#define AT91C_UDP_SOFINT ((unsigned int) 0x1 << 11) // (UDP) USB Start Of frame Interrupt | |
#define AT91C_UDP_WAKEUP ((unsigned int) 0x1 << 13) // (UDP) USB Resume Interrupt | |
// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- | |
// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- | |
// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- | |
#define AT91C_UDP_ENDBUSRES ((unsigned int) 0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt | |
// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- | |
// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- | |
#define AT91C_UDP_EP0 ((unsigned int) 0x1 << 0) // (UDP) Reset Endpoint 0 | |
#define AT91C_UDP_EP1 ((unsigned int) 0x1 << 1) // (UDP) Reset Endpoint 1 | |
#define AT91C_UDP_EP2 ((unsigned int) 0x1 << 2) // (UDP) Reset Endpoint 2 | |
#define AT91C_UDP_EP3 ((unsigned int) 0x1 << 3) // (UDP) Reset Endpoint 3 | |
#define AT91C_UDP_EP4 ((unsigned int) 0x1 << 4) // (UDP) Reset Endpoint 4 | |
#define AT91C_UDP_EP5 ((unsigned int) 0x1 << 5) // (UDP) Reset Endpoint 5 | |
// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- | |
#define AT91C_UDP_TXCOMP ((unsigned int) 0x1 << 0) // (UDP) Generates an IN packet with data previously written in the DPR | |
#define AT91C_UDP_RX_DATA_BK0 ((unsigned int) 0x1 << 1) // (UDP) Receive Data Bank 0 | |
#define AT91C_UDP_RXSETUP ((unsigned int) 0x1 << 2) // (UDP) Sends STALL to the Host (Control endpoints) | |
#define AT91C_UDP_ISOERROR ((unsigned int) 0x1 << 3) // (UDP) Isochronous error (Isochronous endpoints) | |
#define AT91C_UDP_TXPKTRDY ((unsigned int) 0x1 << 4) // (UDP) Transmit Packet Ready | |
#define AT91C_UDP_FORCESTALL ((unsigned int) 0x1 << 5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). | |
#define AT91C_UDP_RX_DATA_BK1 ((unsigned int) 0x1 << 6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). | |
#define AT91C_UDP_DIR ((unsigned int) 0x1 << 7) // (UDP) Transfer Direction | |
#define AT91C_UDP_EPTYPE ((unsigned int) 0x7 << 8) // (UDP) Endpoint type | |
#define AT91C_UDP_EPTYPE_CTRL ((unsigned int) 0x0 << 8) // (UDP) Control | |
#define AT91C_UDP_EPTYPE_ISO_OUT ((unsigned int) 0x1 << 8) // (UDP) Isochronous OUT | |
#define AT91C_UDP_EPTYPE_BULK_OUT ((unsigned int) 0x2 << 8) // (UDP) Bulk OUT | |
#define AT91C_UDP_EPTYPE_INT_OUT ((unsigned int) 0x3 << 8) // (UDP) Interrupt OUT | |
#define AT91C_UDP_EPTYPE_ISO_IN ((unsigned int) 0x5 << 8) // (UDP) Isochronous IN | |
#define AT91C_UDP_EPTYPE_BULK_IN ((unsigned int) 0x6 << 8) // (UDP) Bulk IN | |
#define AT91C_UDP_EPTYPE_INT_IN ((unsigned int) 0x7 << 8) // (UDP) Interrupt IN | |
#define AT91C_UDP_DTGLE ((unsigned int) 0x1 << 11) // (UDP) Data Toggle | |
#define AT91C_UDP_EPEDS ((unsigned int) 0x1 << 15) // (UDP) Endpoint Enable Disable | |
#define AT91C_UDP_RXBYTECNT ((unsigned int) 0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO | |
// -------- UDP_TXVC : (UDP Offset: 0x74) Transceiver Control Register -------- | |
#define AT91C_UDP_TXVDIS ((unsigned int) 0x1 << 8) // (UDP) | |
#define AT91C_UDP_PUON ((unsigned int) 0x1 << 9) // (UDP) Pull-up ON | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Timer Counter Channel Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_TC { | |
AT91_REG TC_CCR; // Channel Control Register | |
AT91_REG TC_CMR; // Channel Mode Register (Capture Mode / Waveform Mode) | |
AT91_REG Reserved0[2]; // | |
AT91_REG TC_CV; // Counter Value | |
AT91_REG TC_RA; // Register A | |
AT91_REG TC_RB; // Register B | |
AT91_REG TC_RC; // Register C | |
AT91_REG TC_SR; // Status Register | |
AT91_REG TC_IER; // Interrupt Enable Register | |
AT91_REG TC_IDR; // Interrupt Disable Register | |
AT91_REG TC_IMR; // Interrupt Mask Register | |
} AT91S_TC, *AT91PS_TC; | |
// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- | |
#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) // (TC) Counter Clock Enable Command | |
#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) // (TC) Counter Clock Disable Command | |
#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) // (TC) Software Trigger Command | |
// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- | |
#define AT91C_TC_CLKS ((unsigned int) 0x7 << 0) // (TC) Clock Selection | |
#define AT91C_TC_CLKS_TIMER_DIV1_CLOCK ((unsigned int) 0x0) // (TC) Clock selected: TIMER_DIV1_CLOCK | |
#define AT91C_TC_CLKS_TIMER_DIV2_CLOCK ((unsigned int) 0x1) // (TC) Clock selected: TIMER_DIV2_CLOCK | |
#define AT91C_TC_CLKS_TIMER_DIV3_CLOCK ((unsigned int) 0x2) // (TC) Clock selected: TIMER_DIV3_CLOCK | |
#define AT91C_TC_CLKS_TIMER_DIV4_CLOCK ((unsigned int) 0x3) // (TC) Clock selected: TIMER_DIV4_CLOCK | |
#define AT91C_TC_CLKS_TIMER_DIV5_CLOCK ((unsigned int) 0x4) // (TC) Clock selected: TIMER_DIV5_CLOCK | |
#define AT91C_TC_CLKS_XC0 ((unsigned int) 0x5) // (TC) Clock selected: XC0 | |
#define AT91C_TC_CLKS_XC1 ((unsigned int) 0x6) // (TC) Clock selected: XC1 | |
#define AT91C_TC_CLKS_XC2 ((unsigned int) 0x7) // (TC) Clock selected: XC2 | |
#define AT91C_TC_CLKI ((unsigned int) 0x1 << 3) // (TC) Clock Invert | |
#define AT91C_TC_BURST ((unsigned int) 0x3 << 4) // (TC) Burst Signal Selection | |
#define AT91C_TC_BURST_NONE ((unsigned int) 0x0 << 4) // (TC) The clock is not gated by an external signal | |
#define AT91C_TC_BURST_XC0 ((unsigned int) 0x1 << 4) // (TC) XC0 is ANDed with the selected clock | |
#define AT91C_TC_BURST_XC1 ((unsigned int) 0x2 << 4) // (TC) XC1 is ANDed with the selected clock | |
#define AT91C_TC_BURST_XC2 ((unsigned int) 0x3 << 4) // (TC) XC2 is ANDed with the selected clock | |
#define AT91C_TC_CPCSTOP ((unsigned int) 0x1 << 6) // (TC) Counter Clock Stopped with RC Compare | |
#define AT91C_TC_LDBSTOP ((unsigned int) 0x1 << 6) // (TC) Counter Clock Stopped with RB Loading | |
#define AT91C_TC_CPCDIS ((unsigned int) 0x1 << 7) // (TC) Counter Clock Disable with RC Compare | |
#define AT91C_TC_LDBDIS ((unsigned int) 0x1 << 7) // (TC) Counter Clock Disabled with RB Loading | |
#define AT91C_TC_ETRGEDG ((unsigned int) 0x3 << 8) // (TC) External Trigger Edge Selection | |
#define AT91C_TC_ETRGEDG_NONE ((unsigned int) 0x0 << 8) // (TC) Edge: None | |
#define AT91C_TC_ETRGEDG_RISING ((unsigned int) 0x1 << 8) // (TC) Edge: rising edge | |
#define AT91C_TC_ETRGEDG_FALLING ((unsigned int) 0x2 << 8) // (TC) Edge: falling edge | |
#define AT91C_TC_ETRGEDG_BOTH ((unsigned int) 0x3 << 8) // (TC) Edge: each edge | |
#define AT91C_TC_EEVTEDG ((unsigned int) 0x3 << 8) // (TC) External Event Edge Selection | |
#define AT91C_TC_EEVTEDG_NONE ((unsigned int) 0x0 << 8) // (TC) Edge: None | |
#define AT91C_TC_EEVTEDG_RISING ((unsigned int) 0x1 << 8) // (TC) Edge: rising edge | |
#define AT91C_TC_EEVTEDG_FALLING ((unsigned int) 0x2 << 8) // (TC) Edge: falling edge | |
#define AT91C_TC_EEVTEDG_BOTH ((unsigned int) 0x3 << 8) // (TC) Edge: each edge | |
#define AT91C_TC_EEVT ((unsigned int) 0x3 << 10) // (TC) External Event Selection | |
#define AT91C_TC_EEVT_TIOB ((unsigned int) 0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input | |
#define AT91C_TC_EEVT_XC0 ((unsigned int) 0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output | |
#define AT91C_TC_EEVT_XC1 ((unsigned int) 0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output | |
#define AT91C_TC_EEVT_XC2 ((unsigned int) 0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output | |
#define AT91C_TC_ABETRG ((unsigned int) 0x1 << 10) // (TC) TIOA or TIOB External Trigger Selection | |
#define AT91C_TC_ENETRG ((unsigned int) 0x1 << 12) // (TC) External Event Trigger enable | |
#define AT91C_TC_WAVESEL ((unsigned int) 0x3 << 13) // (TC) Waveform Selection | |
#define AT91C_TC_WAVESEL_UP ((unsigned int) 0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare | |
#define AT91C_TC_WAVESEL_UPDOWN ((unsigned int) 0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare | |
#define AT91C_TC_WAVESEL_UP_AUTO ((unsigned int) 0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare | |
#define AT91C_TC_WAVESEL_UPDOWN_AUTO ((unsigned int) 0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare | |
#define AT91C_TC_CPCTRG ((unsigned int) 0x1 << 14) // (TC) RC Compare Trigger Enable | |
#define AT91C_TC_WAVE ((unsigned int) 0x1 << 15) // (TC) | |
#define AT91C_TC_ACPA ((unsigned int) 0x3 << 16) // (TC) RA Compare Effect on TIOA | |
#define AT91C_TC_ACPA_NONE ((unsigned int) 0x0 << 16) // (TC) Effect: none | |
#define AT91C_TC_ACPA_SET ((unsigned int) 0x1 << 16) // (TC) Effect: set | |
#define AT91C_TC_ACPA_CLEAR ((unsigned int) 0x2 << 16) // (TC) Effect: clear | |
#define AT91C_TC_ACPA_TOGGLE ((unsigned int) 0x3 << 16) // (TC) Effect: toggle | |
#define AT91C_TC_LDRA ((unsigned int) 0x3 << 16) // (TC) RA Loading Selection | |
#define AT91C_TC_LDRA_NONE ((unsigned int) 0x0 << 16) // (TC) Edge: None | |
#define AT91C_TC_LDRA_RISING ((unsigned int) 0x1 << 16) // (TC) Edge: rising edge of TIOA | |
#define AT91C_TC_LDRA_FALLING ((unsigned int) 0x2 << 16) // (TC) Edge: falling edge of TIOA | |
#define AT91C_TC_LDRA_BOTH ((unsigned int) 0x3 << 16) // (TC) Edge: each edge of TIOA | |
#define AT91C_TC_ACPC ((unsigned int) 0x3 << 18) // (TC) RC Compare Effect on TIOA | |
#define AT91C_TC_ACPC_NONE ((unsigned int) 0x0 << 18) // (TC) Effect: none | |
#define AT91C_TC_ACPC_SET ((unsigned int) 0x1 << 18) // (TC) Effect: set | |
#define AT91C_TC_ACPC_CLEAR ((unsigned int) 0x2 << 18) // (TC) Effect: clear | |
#define AT91C_TC_ACPC_TOGGLE ((unsigned int) 0x3 << 18) // (TC) Effect: toggle | |
#define AT91C_TC_LDRB ((unsigned int) 0x3 << 18) // (TC) RB Loading Selection | |
#define AT91C_TC_LDRB_NONE ((unsigned int) 0x0 << 18) // (TC) Edge: None | |
#define AT91C_TC_LDRB_RISING ((unsigned int) 0x1 << 18) // (TC) Edge: rising edge of TIOA | |
#define AT91C_TC_LDRB_FALLING ((unsigned int) 0x2 << 18) // (TC) Edge: falling edge of TIOA | |
#define AT91C_TC_LDRB_BOTH ((unsigned int) 0x3 << 18) // (TC) Edge: each edge of TIOA | |
#define AT91C_TC_AEEVT ((unsigned int) 0x3 << 20) // (TC) External Event Effect on TIOA | |
#define AT91C_TC_AEEVT_NONE ((unsigned int) 0x0 << 20) // (TC) Effect: none | |
#define AT91C_TC_AEEVT_SET ((unsigned int) 0x1 << 20) // (TC) Effect: set | |
#define AT91C_TC_AEEVT_CLEAR ((unsigned int) 0x2 << 20) // (TC) Effect: clear | |
#define AT91C_TC_AEEVT_TOGGLE ((unsigned int) 0x3 << 20) // (TC) Effect: toggle | |
#define AT91C_TC_ASWTRG ((unsigned int) 0x3 << 22) // (TC) Software Trigger Effect on TIOA | |
#define AT91C_TC_ASWTRG_NONE ((unsigned int) 0x0 << 22) // (TC) Effect: none | |
#define AT91C_TC_ASWTRG_SET ((unsigned int) 0x1 << 22) // (TC) Effect: set | |
#define AT91C_TC_ASWTRG_CLEAR ((unsigned int) 0x2 << 22) // (TC) Effect: clear | |
#define AT91C_TC_ASWTRG_TOGGLE ((unsigned int) 0x3 << 22) // (TC) Effect: toggle | |
#define AT91C_TC_BCPB ((unsigned int) 0x3 << 24) // (TC) RB Compare Effect on TIOB | |
#define AT91C_TC_BCPB_NONE ((unsigned int) 0x0 << 24) // (TC) Effect: none | |
#define AT91C_TC_BCPB_SET ((unsigned int) 0x1 << 24) // (TC) Effect: set | |
#define AT91C_TC_BCPB_CLEAR ((unsigned int) 0x2 << 24) // (TC) Effect: clear | |
#define AT91C_TC_BCPB_TOGGLE ((unsigned int) 0x3 << 24) // (TC) Effect: toggle | |
#define AT91C_TC_BCPC ((unsigned int) 0x3 << 26) // (TC) RC Compare Effect on TIOB | |
#define AT91C_TC_BCPC_NONE ((unsigned int) 0x0 << 26) // (TC) Effect: none | |
#define AT91C_TC_BCPC_SET ((unsigned int) 0x1 << 26) // (TC) Effect: set | |
#define AT91C_TC_BCPC_CLEAR ((unsigned int) 0x2 << 26) // (TC) Effect: clear | |
#define AT91C_TC_BCPC_TOGGLE ((unsigned int) 0x3 << 26) // (TC) Effect: toggle | |
#define AT91C_TC_BEEVT ((unsigned int) 0x3 << 28) // (TC) External Event Effect on TIOB | |
#define AT91C_TC_BEEVT_NONE ((unsigned int) 0x0 << 28) // (TC) Effect: none | |
#define AT91C_TC_BEEVT_SET ((unsigned int) 0x1 << 28) // (TC) Effect: set | |
#define AT91C_TC_BEEVT_CLEAR ((unsigned int) 0x2 << 28) // (TC) Effect: clear | |
#define AT91C_TC_BEEVT_TOGGLE ((unsigned int) 0x3 << 28) // (TC) Effect: toggle | |
#define AT91C_TC_BSWTRG ((unsigned int) 0x3 << 30) // (TC) Software Trigger Effect on TIOB | |
#define AT91C_TC_BSWTRG_NONE ((unsigned int) 0x0 << 30) // (TC) Effect: none | |
#define AT91C_TC_BSWTRG_SET ((unsigned int) 0x1 << 30) // (TC) Effect: set | |
#define AT91C_TC_BSWTRG_CLEAR ((unsigned int) 0x2 << 30) // (TC) Effect: clear | |
#define AT91C_TC_BSWTRG_TOGGLE ((unsigned int) 0x3 << 30) // (TC) Effect: toggle | |
// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- | |
#define AT91C_TC_COVFS ((unsigned int) 0x1 << 0) // (TC) Counter Overflow | |
#define AT91C_TC_LOVRS ((unsigned int) 0x1 << 1) // (TC) Load Overrun | |
#define AT91C_TC_CPAS ((unsigned int) 0x1 << 2) // (TC) RA Compare | |
#define AT91C_TC_CPBS ((unsigned int) 0x1 << 3) // (TC) RB Compare | |
#define AT91C_TC_CPCS ((unsigned int) 0x1 << 4) // (TC) RC Compare | |
#define AT91C_TC_LDRAS ((unsigned int) 0x1 << 5) // (TC) RA Loading | |
#define AT91C_TC_LDRBS ((unsigned int) 0x1 << 6) // (TC) RB Loading | |
#define AT91C_TC_ETRGS ((unsigned int) 0x1 << 7) // (TC) External Trigger | |
#define AT91C_TC_CLKSTA ((unsigned int) 0x1 << 16) // (TC) Clock Enabling | |
#define AT91C_TC_MTIOA ((unsigned int) 0x1 << 17) // (TC) TIOA Mirror | |
#define AT91C_TC_MTIOB ((unsigned int) 0x1 << 18) // (TC) TIOA Mirror | |
// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- | |
// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- | |
// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Timer Counter Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_TCB { | |
AT91S_TC TCB_TC0; // TC Channel 0 | |
AT91_REG Reserved0[4]; // | |
AT91S_TC TCB_TC1; // TC Channel 1 | |
AT91_REG Reserved1[4]; // | |
AT91S_TC TCB_TC2; // TC Channel 2 | |
AT91_REG Reserved2[4]; // | |
AT91_REG TCB_BCR; // TC Block Control Register | |
AT91_REG TCB_BMR; // TC Block Mode Register | |
} AT91S_TCB, *AT91PS_TCB; | |
// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- | |
#define AT91C_TCB_SYNC ((unsigned int) 0x1 << 0) // (TCB) Synchro Command | |
// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- | |
#define AT91C_TCB_TC0XC0S ((unsigned int) 0x3 << 0) // (TCB) External Clock Signal 0 Selection | |
#define AT91C_TCB_TC0XC0S_TCLK0 ((unsigned int) 0x0) // (TCB) TCLK0 connected to XC0 | |
#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) // (TCB) None signal connected to XC0 | |
#define AT91C_TCB_TC0XC0S_TIOA1 ((unsigned int) 0x2) // (TCB) TIOA1 connected to XC0 | |
#define AT91C_TCB_TC0XC0S_TIOA2 ((unsigned int) 0x3) // (TCB) TIOA2 connected to XC0 | |
#define AT91C_TCB_TC1XC1S ((unsigned int) 0x3 << 2) // (TCB) External Clock Signal 1 Selection | |
#define AT91C_TCB_TC1XC1S_TCLK1 ((unsigned int) 0x0 << 2) // (TCB) TCLK1 connected to XC1 | |
#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) // (TCB) None signal connected to XC1 | |
#define AT91C_TCB_TC1XC1S_TIOA0 ((unsigned int) 0x2 << 2) // (TCB) TIOA0 connected to XC1 | |
#define AT91C_TCB_TC1XC1S_TIOA2 ((unsigned int) 0x3 << 2) // (TCB) TIOA2 connected to XC1 | |
#define AT91C_TCB_TC2XC2S ((unsigned int) 0x3 << 4) // (TCB) External Clock Signal 2 Selection | |
#define AT91C_TCB_TC2XC2S_TCLK2 ((unsigned int) 0x0 << 4) // (TCB) TCLK2 connected to XC2 | |
#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) // (TCB) None signal connected to XC2 | |
#define AT91C_TCB_TC2XC2S_TIOA0 ((unsigned int) 0x2 << 4) // (TCB) TIOA0 connected to XC2 | |
#define AT91C_TCB_TC2XC2S_TIOA1 ((unsigned int) 0x3 << 4) // (TCB) TIOA2 connected to XC2 | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Control Area Network MailBox Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_CAN_MB { | |
AT91_REG CAN_MB_MMR; // MailBox Mode Register | |
AT91_REG CAN_MB_MAM; // MailBox Acceptance Mask Register | |
AT91_REG CAN_MB_MID; // MailBox ID Register | |
AT91_REG CAN_MB_MFID; // MailBox Family ID Register | |
AT91_REG CAN_MB_MSR; // MailBox Status Register | |
AT91_REG CAN_MB_MDL; // MailBox Data Low Register | |
AT91_REG CAN_MB_MDH; // MailBox Data High Register | |
AT91_REG CAN_MB_MCR; // MailBox Control Register | |
} AT91S_CAN_MB, *AT91PS_CAN_MB; | |
// -------- CAN_MMR : (CAN_MB Offset: 0x0) CAN Message Mode Register -------- | |
#define AT91C_CAN_MTIMEMARK ((unsigned int) 0xFFFF << 0) // (CAN_MB) Mailbox Timemark | |
#define AT91C_CAN_PRIOR ((unsigned int) 0xF << 16) // (CAN_MB) Mailbox Priority | |
#define AT91C_CAN_MOT ((unsigned int) 0x7 << 24) // (CAN_MB) Mailbox Object Type | |
#define AT91C_CAN_MOT_DIS ((unsigned int) 0x0 << 24) // (CAN_MB) | |
#define AT91C_CAN_MOT_RX ((unsigned int) 0x1 << 24) // (CAN_MB) | |
#define AT91C_CAN_MOT_RXOVERWRITE ((unsigned int) 0x2 << 24) // (CAN_MB) | |
#define AT91C_CAN_MOT_TX ((unsigned int) 0x3 << 24) // (CAN_MB) | |
#define AT91C_CAN_MOT_CONSUMER ((unsigned int) 0x4 << 24) // (CAN_MB) | |
#define AT91C_CAN_MOT_PRODUCER ((unsigned int) 0x5 << 24) // (CAN_MB) | |
// -------- CAN_MAM : (CAN_MB Offset: 0x4) CAN Message Acceptance Mask Register -------- | |
#define AT91C_CAN_MIDvB ((unsigned int) 0x3FFFF << 0) // (CAN_MB) Complementary bits for identifier in extended mode | |
#define AT91C_CAN_MIDvA ((unsigned int) 0x7FF << 18) // (CAN_MB) Identifier for standard frame mode | |
#define AT91C_CAN_MIDE ((unsigned int) 0x1 << 29) // (CAN_MB) Identifier Version | |
// -------- CAN_MID : (CAN_MB Offset: 0x8) CAN Message ID Register -------- | |
// -------- CAN_MFID : (CAN_MB Offset: 0xc) CAN Message Family ID Register -------- | |
// -------- CAN_MSR : (CAN_MB Offset: 0x10) CAN Message Status Register -------- | |
#define AT91C_CAN_MTIMESTAMP ((unsigned int) 0xFFFF << 0) // (CAN_MB) Timer Value | |
#define AT91C_CAN_MDLC ((unsigned int) 0xF << 16) // (CAN_MB) Mailbox Data Length Code | |
#define AT91C_CAN_MRTR ((unsigned int) 0x1 << 20) // (CAN_MB) Mailbox Remote Transmission Request | |
#define AT91C_CAN_MABT ((unsigned int) 0x1 << 22) // (CAN_MB) Mailbox Message Abort | |
#define AT91C_CAN_MRDY ((unsigned int) 0x1 << 23) // (CAN_MB) Mailbox Ready | |
#define AT91C_CAN_MMI ((unsigned int) 0x1 << 24) // (CAN_MB) Mailbox Message Ignored | |
// -------- CAN_MDL : (CAN_MB Offset: 0x14) CAN Message Data Low Register -------- | |
// -------- CAN_MDH : (CAN_MB Offset: 0x18) CAN Message Data High Register -------- | |
// -------- CAN_MCR : (CAN_MB Offset: 0x1c) CAN Message Control Register -------- | |
#define AT91C_CAN_MACR ((unsigned int) 0x1 << 22) // (CAN_MB) Abort Request for Mailbox | |
#define AT91C_CAN_MTCR ((unsigned int) 0x1 << 23) // (CAN_MB) Mailbox Transfer Command | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Control Area Network Interface | |
// ***************************************************************************** | |
typedef struct _AT91S_CAN { | |
AT91_REG CAN_MR; // Mode Register | |
AT91_REG CAN_IER; // Interrupt Enable Register | |
AT91_REG CAN_IDR; // Interrupt Disable Register | |
AT91_REG CAN_IMR; // Interrupt Mask Register | |
AT91_REG CAN_SR; // Status Register | |
AT91_REG CAN_BR; // Baudrate Register | |
AT91_REG CAN_TIM; // Timer Register | |
AT91_REG CAN_TIMESTP; // Time Stamp Register | |
AT91_REG CAN_ECR; // Error Counter Register | |
AT91_REG CAN_TCR; // Transfer Command Register | |
AT91_REG CAN_ACR; // Abort Command Register | |
AT91_REG Reserved0[52]; // | |
AT91_REG CAN_VR; // Version Register | |
AT91_REG Reserved1[64]; // | |
AT91S_CAN_MB CAN_MB0; // CAN Mailbox 0 | |
AT91S_CAN_MB CAN_MB1; // CAN Mailbox 1 | |
AT91S_CAN_MB CAN_MB2; // CAN Mailbox 2 | |
AT91S_CAN_MB CAN_MB3; // CAN Mailbox 3 | |
AT91S_CAN_MB CAN_MB4; // CAN Mailbox 4 | |
AT91S_CAN_MB CAN_MB5; // CAN Mailbox 5 | |
AT91S_CAN_MB CAN_MB6; // CAN Mailbox 6 | |
AT91S_CAN_MB CAN_MB7; // CAN Mailbox 7 | |
AT91S_CAN_MB CAN_MB8; // CAN Mailbox 8 | |
AT91S_CAN_MB CAN_MB9; // CAN Mailbox 9 | |
AT91S_CAN_MB CAN_MB10; // CAN Mailbox 10 | |
AT91S_CAN_MB CAN_MB11; // CAN Mailbox 11 | |
AT91S_CAN_MB CAN_MB12; // CAN Mailbox 12 | |
AT91S_CAN_MB CAN_MB13; // CAN Mailbox 13 | |
AT91S_CAN_MB CAN_MB14; // CAN Mailbox 14 | |
AT91S_CAN_MB CAN_MB15; // CAN Mailbox 15 | |
} AT91S_CAN, *AT91PS_CAN; | |
// -------- CAN_MR : (CAN Offset: 0x0) CAN Mode Register -------- | |
#define AT91C_CAN_CANEN ((unsigned int) 0x1 << 0) // (CAN) CAN Controller Enable | |
#define AT91C_CAN_LPM ((unsigned int) 0x1 << 1) // (CAN) Disable/Enable Low Power Mode | |
#define AT91C_CAN_ABM ((unsigned int) 0x1 << 2) // (CAN) Disable/Enable Autobaud/Listen Mode | |
#define AT91C_CAN_OVL ((unsigned int) 0x1 << 3) // (CAN) Disable/Enable Overload Frame | |
#define AT91C_CAN_TEOF ((unsigned int) 0x1 << 4) // (CAN) Time Stamp messages at each end of Frame | |
#define AT91C_CAN_TTM ((unsigned int) 0x1 << 5) // (CAN) Disable/Enable Time Trigger Mode | |
#define AT91C_CAN_TIMFRZ ((unsigned int) 0x1 << 6) // (CAN) Enable Timer Freeze | |
#define AT91C_CAN_DRPT ((unsigned int) 0x1 << 7) // (CAN) Disable Repeat | |
// -------- CAN_IER : (CAN Offset: 0x4) CAN Interrupt Enable Register -------- | |
#define AT91C_CAN_MB0 ((unsigned int) 0x1 << 0) // (CAN) Mailbox 0 Flag | |
#define AT91C_CAN_MB1 ((unsigned int) 0x1 << 1) // (CAN) Mailbox 1 Flag | |
#define AT91C_CAN_MB2 ((unsigned int) 0x1 << 2) // (CAN) Mailbox 2 Flag | |
#define AT91C_CAN_MB3 ((unsigned int) 0x1 << 3) // (CAN) Mailbox 3 Flag | |
#define AT91C_CAN_MB4 ((unsigned int) 0x1 << 4) // (CAN) Mailbox 4 Flag | |
#define AT91C_CAN_MB5 ((unsigned int) 0x1 << 5) // (CAN) Mailbox 5 Flag | |
#define AT91C_CAN_MB6 ((unsigned int) 0x1 << 6) // (CAN) Mailbox 6 Flag | |
#define AT91C_CAN_MB7 ((unsigned int) 0x1 << 7) // (CAN) Mailbox 7 Flag | |
#define AT91C_CAN_MB8 ((unsigned int) 0x1 << 8) // (CAN) Mailbox 8 Flag | |
#define AT91C_CAN_MB9 ((unsigned int) 0x1 << 9) // (CAN) Mailbox 9 Flag | |
#define AT91C_CAN_MB10 ((unsigned int) 0x1 << 10) // (CAN) Mailbox 10 Flag | |
#define AT91C_CAN_MB11 ((unsigned int) 0x1 << 11) // (CAN) Mailbox 11 Flag | |
#define AT91C_CAN_MB12 ((unsigned int) 0x1 << 12) // (CAN) Mailbox 12 Flag | |
#define AT91C_CAN_MB13 ((unsigned int) 0x1 << 13) // (CAN) Mailbox 13 Flag | |
#define AT91C_CAN_MB14 ((unsigned int) 0x1 << 14) // (CAN) Mailbox 14 Flag | |
#define AT91C_CAN_MB15 ((unsigned int) 0x1 << 15) // (CAN) Mailbox 15 Flag | |
#define AT91C_CAN_ERRA ((unsigned int) 0x1 << 16) // (CAN) Error Active Mode Flag | |
#define AT91C_CAN_WARN ((unsigned int) 0x1 << 17) // (CAN) Warning Limit Flag | |
#define AT91C_CAN_ERRP ((unsigned int) 0x1 << 18) // (CAN) Error Passive Mode Flag | |
#define AT91C_CAN_BOFF ((unsigned int) 0x1 << 19) // (CAN) Bus Off Mode Flag | |
#define AT91C_CAN_SLEEP ((unsigned int) 0x1 << 20) // (CAN) Sleep Flag | |
#define AT91C_CAN_WAKEUP ((unsigned int) 0x1 << 21) // (CAN) Wakeup Flag | |
#define AT91C_CAN_TOVF ((unsigned int) 0x1 << 22) // (CAN) Timer Overflow Flag | |
#define AT91C_CAN_TSTP ((unsigned int) 0x1 << 23) // (CAN) Timestamp Flag | |
#define AT91C_CAN_CERR ((unsigned int) 0x1 << 24) // (CAN) CRC Error | |
#define AT91C_CAN_SERR ((unsigned int) 0x1 << 25) // (CAN) Stuffing Error | |
#define AT91C_CAN_AERR ((unsigned int) 0x1 << 26) // (CAN) Acknowledgment Error | |
#define AT91C_CAN_FERR ((unsigned int) 0x1 << 27) // (CAN) Form Error | |
#define AT91C_CAN_BERR ((unsigned int) 0x1 << 28) // (CAN) Bit Error | |
// -------- CAN_IDR : (CAN Offset: 0x8) CAN Interrupt Disable Register -------- | |
// -------- CAN_IMR : (CAN Offset: 0xc) CAN Interrupt Mask Register -------- | |
// -------- CAN_SR : (CAN Offset: 0x10) CAN Status Register -------- | |
#define AT91C_CAN_RBSY ((unsigned int) 0x1 << 29) // (CAN) Receiver Busy | |
#define AT91C_CAN_TBSY ((unsigned int) 0x1 << 30) // (CAN) Transmitter Busy | |
#define AT91C_CAN_OVLY ((unsigned int) 0x1 << 31) // (CAN) Overload Busy | |
// -------- CAN_BR : (CAN Offset: 0x14) CAN Baudrate Register -------- | |
#define AT91C_CAN_PHASE2 ((unsigned int) 0x7 << 0) // (CAN) Phase 2 segment | |
#define AT91C_CAN_PHASE1 ((unsigned int) 0x7 << 4) // (CAN) Phase 1 segment | |
#define AT91C_CAN_PROPAG ((unsigned int) 0x7 << 8) // (CAN) Programmation time segment | |
#define AT91C_CAN_SYNC ((unsigned int) 0x3 << 12) // (CAN) Re-synchronization jump width segment | |
#define AT91C_CAN_BRP ((unsigned int) 0x7F << 16) // (CAN) Baudrate Prescaler | |
#define AT91C_CAN_SMP ((unsigned int) 0x1 << 24) // (CAN) Sampling mode | |
// -------- CAN_TIM : (CAN Offset: 0x18) CAN Timer Register -------- | |
#define AT91C_CAN_TIMER ((unsigned int) 0xFFFF << 0) // (CAN) Timer field | |
// -------- CAN_TIMESTP : (CAN Offset: 0x1c) CAN Timestamp Register -------- | |
// -------- CAN_ECR : (CAN Offset: 0x20) CAN Error Counter Register -------- | |
#define AT91C_CAN_REC ((unsigned int) 0xFF << 0) // (CAN) Receive Error Counter | |
#define AT91C_CAN_TEC ((unsigned int) 0xFF << 16) // (CAN) Transmit Error Counter | |
// -------- CAN_TCR : (CAN Offset: 0x24) CAN Transfer Command Register -------- | |
#define AT91C_CAN_TIMRST ((unsigned int) 0x1 << 31) // (CAN) Timer Reset Field | |
// -------- CAN_ACR : (CAN Offset: 0x28) CAN Abort Command Register -------- | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Ethernet MAC 10/100 | |
// ***************************************************************************** | |
typedef struct _AT91S_EMAC { | |
AT91_REG EMAC_NCR; // Network Control Register | |
AT91_REG EMAC_NCFGR; // Network Configuration Register | |
AT91_REG EMAC_NSR; // Network Status Register | |
AT91_REG Reserved0[2]; // | |
AT91_REG EMAC_TSR; // Transmit Status Register | |
AT91_REG EMAC_RBQP; // Receive Buffer Queue Pointer | |
AT91_REG EMAC_TBQP; // Transmit Buffer Queue Pointer | |
AT91_REG EMAC_RSR; // Receive Status Register | |
AT91_REG EMAC_ISR; // Interrupt Status Register | |
AT91_REG EMAC_IER; // Interrupt Enable Register | |
AT91_REG EMAC_IDR; // Interrupt Disable Register | |
AT91_REG EMAC_IMR; // Interrupt Mask Register | |
AT91_REG EMAC_MAN; // PHY Maintenance Register | |
AT91_REG EMAC_PTR; // Pause Time Register | |
AT91_REG EMAC_PFR; // Pause Frames received Register | |
AT91_REG EMAC_FTO; // Frames Transmitted OK Register | |
AT91_REG EMAC_SCF; // Single Collision Frame Register | |
AT91_REG EMAC_MCF; // Multiple Collision Frame Register | |
AT91_REG EMAC_FRO; // Frames Received OK Register | |
AT91_REG EMAC_FCSE; // Frame Check Sequence Error Register | |
AT91_REG EMAC_ALE; // Alignment Error Register | |
AT91_REG EMAC_DTF; // Deferred Transmission Frame Register | |
AT91_REG EMAC_LCOL; // Late Collision Register | |
AT91_REG EMAC_ECOL; // Excessive Collision Register | |
AT91_REG EMAC_TUND; // Transmit Underrun Error Register | |
AT91_REG EMAC_CSE; // Carrier Sense Error Register | |
AT91_REG EMAC_RRE; // Receive Ressource Error Register | |
AT91_REG EMAC_ROV; // Receive Overrun Errors Register | |
AT91_REG EMAC_RSE; // Receive Symbol Errors Register | |
AT91_REG EMAC_ELE; // Excessive Length Errors Register | |
AT91_REG EMAC_RJA; // Receive Jabbers Register | |
AT91_REG EMAC_USF; // Undersize Frames Register | |
AT91_REG EMAC_STE; // SQE Test Error Register | |
AT91_REG EMAC_RLE; // Receive Length Field Mismatch Register | |
AT91_REG EMAC_TPF; // Transmitted Pause Frames Register | |
AT91_REG EMAC_HRB; // Hash Address Bottom[31:0] | |
AT91_REG EMAC_HRT; // Hash Address Top[63:32] | |
AT91_REG EMAC_SA1L; // Specific Address 1 Bottom, First 4 bytes | |
AT91_REG EMAC_SA1H; // Specific Address 1 Top, Last 2 bytes | |
AT91_REG EMAC_SA2L; // Specific Address 2 Bottom, First 4 bytes | |
AT91_REG EMAC_SA2H; // Specific Address 2 Top, Last 2 bytes | |
AT91_REG EMAC_SA3L; // Specific Address 3 Bottom, First 4 bytes | |
AT91_REG EMAC_SA3H; // Specific Address 3 Top, Last 2 bytes | |
AT91_REG EMAC_SA4L; // Specific Address 4 Bottom, First 4 bytes | |
AT91_REG EMAC_SA4H; // Specific Address 4 Top, Last 2 bytes | |
AT91_REG EMAC_TID; // Type ID Checking Register | |
AT91_REG EMAC_TPQ; // Transmit Pause Quantum Register | |
AT91_REG EMAC_USRIO; // USER Input/Output Register | |
AT91_REG EMAC_WOL; // Wake On LAN Register | |
AT91_REG Reserved1[13]; // | |
AT91_REG EMAC_REV; // Revision Register | |
} AT91S_EMAC, *AT91PS_EMAC; | |
// -------- EMAC_NCR : (EMAC Offset: 0x0) -------- | |
#define AT91C_EMAC_LB ((unsigned int) 0x1 << 0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level. | |
#define AT91C_EMAC_LLB ((unsigned int) 0x1 << 1) // (EMAC) Loopback local. | |
#define AT91C_EMAC_RE ((unsigned int) 0x1 << 2) // (EMAC) Receive enable. | |
#define AT91C_EMAC_TE ((unsigned int) 0x1 << 3) // (EMAC) Transmit enable. | |
#define AT91C_EMAC_MPE ((unsigned int) 0x1 << 4) // (EMAC) Management port enable. | |
#define AT91C_EMAC_CLRSTAT ((unsigned int) 0x1 << 5) // (EMAC) Clear statistics registers. | |
#define AT91C_EMAC_INCSTAT ((unsigned int) 0x1 << 6) // (EMAC) Increment statistics registers. | |
#define AT91C_EMAC_WESTAT ((unsigned int) 0x1 << 7) // (EMAC) Write enable for statistics registers. | |
#define AT91C_EMAC_BP ((unsigned int) 0x1 << 8) // (EMAC) Back pressure. | |
#define AT91C_EMAC_TSTART ((unsigned int) 0x1 << 9) // (EMAC) Start Transmission. | |
#define AT91C_EMAC_THALT ((unsigned int) 0x1 << 10) // (EMAC) Transmission Halt. | |
#define AT91C_EMAC_TPFR ((unsigned int) 0x1 << 11) // (EMAC) Transmit pause frame | |
#define AT91C_EMAC_TZQ ((unsigned int) 0x1 << 12) // (EMAC) Transmit zero quantum pause frame | |
// -------- EMAC_NCFGR : (EMAC Offset: 0x4) Network Configuration Register -------- | |
#define AT91C_EMAC_SPD ((unsigned int) 0x1 << 0) // (EMAC) Speed. | |
#define AT91C_EMAC_FD ((unsigned int) 0x1 << 1) // (EMAC) Full duplex. | |
#define AT91C_EMAC_JFRAME ((unsigned int) 0x1 << 3) // (EMAC) Jumbo Frames. | |
#define AT91C_EMAC_CAF ((unsigned int) 0x1 << 4) // (EMAC) Copy all frames. | |
#define AT91C_EMAC_NBC ((unsigned int) 0x1 << 5) // (EMAC) No broadcast. | |
#define AT91C_EMAC_MTI ((unsigned int) 0x1 << 6) // (EMAC) Multicast hash event enable | |
#define AT91C_EMAC_UNI ((unsigned int) 0x1 << 7) // (EMAC) Unicast hash enable. | |
#define AT91C_EMAC_BIG ((unsigned int) 0x1 << 8) // (EMAC) Receive 1522 bytes. | |
#define AT91C_EMAC_EAE ((unsigned int) 0x1 << 9) // (EMAC) External address match enable. | |
#define AT91C_EMAC_CLK ((unsigned int) 0x3 << 10) // (EMAC) | |
#define AT91C_EMAC_CLK_HCLK_8 ((unsigned int) 0x0 << 10) // (EMAC) HCLK divided by 8 | |
#define AT91C_EMAC_CLK_HCLK_16 ((unsigned int) 0x1 << 10) // (EMAC) HCLK divided by 16 | |
#define AT91C_EMAC_CLK_HCLK_32 ((unsigned int) 0x2 << 10) // (EMAC) HCLK divided by 32 | |
#define AT91C_EMAC_CLK_HCLK_64 ((unsigned int) 0x3 << 10) // (EMAC) HCLK divided by 64 | |
#define AT91C_EMAC_RTY ((unsigned int) 0x1 << 12) // (EMAC) | |
#define AT91C_EMAC_PAE ((unsigned int) 0x1 << 13) // (EMAC) | |
#define AT91C_EMAC_RBOF ((unsigned int) 0x3 << 14) // (EMAC) | |
#define AT91C_EMAC_RBOF_OFFSET_0 ((unsigned int) 0x0 << 14) // (EMAC) no offset from start of receive buffer | |
#define AT91C_EMAC_RBOF_OFFSET_1 ((unsigned int) 0x1 << 14) // (EMAC) one byte offset from start of receive buffer | |
#define AT91C_EMAC_RBOF_OFFSET_2 ((unsigned int) 0x2 << 14) // (EMAC) two bytes offset from start of receive buffer | |
#define AT91C_EMAC_RBOF_OFFSET_3 ((unsigned int) 0x3 << 14) // (EMAC) three bytes offset from start of receive buffer | |
#define AT91C_EMAC_RLCE ((unsigned int) 0x1 << 16) // (EMAC) Receive Length field Checking Enable | |
#define AT91C_EMAC_DRFCS ((unsigned int) 0x1 << 17) // (EMAC) Discard Receive FCS | |
#define AT91C_EMAC_EFRHD ((unsigned int) 0x1 << 18) // (EMAC) | |
#define AT91C_EMAC_IRXFCS ((unsigned int) 0x1 << 19) // (EMAC) Ignore RX FCS | |
// -------- EMAC_NSR : (EMAC Offset: 0x8) Network Status Register -------- | |
#define AT91C_EMAC_LINKR ((unsigned int) 0x1 << 0) // (EMAC) | |
#define AT91C_EMAC_MDIO ((unsigned int) 0x1 << 1) // (EMAC) | |
#define AT91C_EMAC_IDLE ((unsigned int) 0x1 << 2) // (EMAC) | |
// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Status Register -------- | |
#define AT91C_EMAC_UBR ((unsigned int) 0x1 << 0) // (EMAC) | |
#define AT91C_EMAC_COL ((unsigned int) 0x1 << 1) // (EMAC) | |
#define AT91C_EMAC_RLES ((unsigned int) 0x1 << 2) // (EMAC) | |
#define AT91C_EMAC_TGO ((unsigned int) 0x1 << 3) // (EMAC) Transmit Go | |
#define AT91C_EMAC_BEX ((unsigned int) 0x1 << 4) // (EMAC) Buffers exhausted mid frame | |
#define AT91C_EMAC_COMP ((unsigned int) 0x1 << 5) // (EMAC) | |
#define AT91C_EMAC_UND ((unsigned int) 0x1 << 6) // (EMAC) | |
// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- | |
#define AT91C_EMAC_BNA ((unsigned int) 0x1 << 0) // (EMAC) | |
#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) // (EMAC) | |
#define AT91C_EMAC_OVR ((unsigned int) 0x1 << 2) // (EMAC) | |
// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- | |
#define AT91C_EMAC_MFD ((unsigned int) 0x1 << 0) // (EMAC) | |
#define AT91C_EMAC_RCOMP ((unsigned int) 0x1 << 1) // (EMAC) | |
#define AT91C_EMAC_RXUBR ((unsigned int) 0x1 << 2) // (EMAC) | |
#define AT91C_EMAC_TXUBR ((unsigned int) 0x1 << 3) // (EMAC) | |
#define AT91C_EMAC_TUNDR ((unsigned int) 0x1 << 4) // (EMAC) | |
#define AT91C_EMAC_RLEX ((unsigned int) 0x1 << 5) // (EMAC) | |
#define AT91C_EMAC_TXERR ((unsigned int) 0x1 << 6) // (EMAC) | |
#define AT91C_EMAC_TCOMP ((unsigned int) 0x1 << 7) // (EMAC) | |
#define AT91C_EMAC_LINK ((unsigned int) 0x1 << 9) // (EMAC) | |
#define AT91C_EMAC_ROVR ((unsigned int) 0x1 << 10) // (EMAC) | |
#define AT91C_EMAC_HRESP ((unsigned int) 0x1 << 11) // (EMAC) | |
#define AT91C_EMAC_PFRE ((unsigned int) 0x1 << 12) // (EMAC) | |
#define AT91C_EMAC_PTZ ((unsigned int) 0x1 << 13) // (EMAC) | |
// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- | |
// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- | |
// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- | |
// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- | |
#define AT91C_EMAC_DATA ((unsigned int) 0xFFFF << 0) // (EMAC) | |
#define AT91C_EMAC_CODE ((unsigned int) 0x3 << 16) // (EMAC) | |
#define AT91C_EMAC_REGA ((unsigned int) 0x1F << 18) // (EMAC) | |
#define AT91C_EMAC_PHYA ((unsigned int) 0x1F << 23) // (EMAC) | |
#define AT91C_EMAC_RW ((unsigned int) 0x3 << 28) // (EMAC) | |
#define AT91C_EMAC_SOF ((unsigned int) 0x3 << 30) // (EMAC) | |
// -------- EMAC_USRIO : (EMAC Offset: 0xc0) USER Input Output Register -------- | |
#define AT91C_EMAC_RMII ((unsigned int) 0x1 << 0) // (EMAC) Reduce MII | |
// -------- EMAC_WOL : (EMAC Offset: 0xc4) Wake On LAN Register -------- | |
#define AT91C_EMAC_IP ((unsigned int) 0xFFFF << 0) // (EMAC) ARP request IP address | |
#define AT91C_EMAC_MAG ((unsigned int) 0x1 << 16) // (EMAC) Magic packet event enable | |
#define AT91C_EMAC_ARP ((unsigned int) 0x1 << 17) // (EMAC) ARP request event enable | |
#define AT91C_EMAC_SA1 ((unsigned int) 0x1 << 18) // (EMAC) Specific address register 1 event enable | |
// -------- EMAC_REV : (EMAC Offset: 0xfc) Revision Register -------- | |
#define AT91C_EMAC_REVREF ((unsigned int) 0xFFFF << 0) // (EMAC) | |
#define AT91C_EMAC_PARTREF ((unsigned int) 0xFFFF << 16) // (EMAC) | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Analog to Digital Convertor | |
// ***************************************************************************** | |
typedef struct _AT91S_ADC { | |
AT91_REG ADC_CR; // ADC Control Register | |
AT91_REG ADC_MR; // ADC Mode Register | |
AT91_REG Reserved0[2]; // | |
AT91_REG ADC_CHER; // ADC Channel Enable Register | |
AT91_REG ADC_CHDR; // ADC Channel Disable Register | |
AT91_REG ADC_CHSR; // ADC Channel Status Register | |
AT91_REG ADC_SR; // ADC Status Register | |
AT91_REG ADC_LCDR; // ADC Last Converted Data Register | |
AT91_REG ADC_IER; // ADC Interrupt Enable Register | |
AT91_REG ADC_IDR; // ADC Interrupt Disable Register | |
AT91_REG ADC_IMR; // ADC Interrupt Mask Register | |
AT91_REG ADC_CDR0; // ADC Channel Data Register 0 | |
AT91_REG ADC_CDR1; // ADC Channel Data Register 1 | |
AT91_REG ADC_CDR2; // ADC Channel Data Register 2 | |
AT91_REG ADC_CDR3; // ADC Channel Data Register 3 | |
AT91_REG ADC_CDR4; // ADC Channel Data Register 4 | |
AT91_REG ADC_CDR5; // ADC Channel Data Register 5 | |
AT91_REG ADC_CDR6; // ADC Channel Data Register 6 | |
AT91_REG ADC_CDR7; // ADC Channel Data Register 7 | |
AT91_REG Reserved1[44]; // | |
AT91_REG ADC_RPR; // Receive Pointer Register | |
AT91_REG ADC_RCR; // Receive Counter Register | |
AT91_REG ADC_TPR; // Transmit Pointer Register | |
AT91_REG ADC_TCR; // Transmit Counter Register | |
AT91_REG ADC_RNPR; // Receive Next Pointer Register | |
AT91_REG ADC_RNCR; // Receive Next Counter Register | |
AT91_REG ADC_TNPR; // Transmit Next Pointer Register | |
AT91_REG ADC_TNCR; // Transmit Next Counter Register | |
AT91_REG ADC_PTCR; // PDC Transfer Control Register | |
AT91_REG ADC_PTSR; // PDC Transfer Status Register | |
} AT91S_ADC, *AT91PS_ADC; | |
// -------- ADC_CR : (ADC Offset: 0x0) ADC Control Register -------- | |
#define AT91C_ADC_SWRST ((unsigned int) 0x1 << 0) // (ADC) Software Reset | |
#define AT91C_ADC_START ((unsigned int) 0x1 << 1) // (ADC) Start Conversion | |
// -------- ADC_MR : (ADC Offset: 0x4) ADC Mode Register -------- | |
#define AT91C_ADC_TRGEN ((unsigned int) 0x1 << 0) // (ADC) Trigger Enable | |
#define AT91C_ADC_TRGEN_DIS ((unsigned int) 0x0) // (ADC) Hradware triggers are disabled. Starting a conversion is only possible by software | |
#define AT91C_ADC_TRGEN_EN ((unsigned int) 0x1) // (ADC) Hardware trigger selected by TRGSEL field is enabled. | |
#define AT91C_ADC_TRGSEL ((unsigned int) 0x7 << 1) // (ADC) Trigger Selection | |
#define AT91C_ADC_TRGSEL_TIOA0 ((unsigned int) 0x0 << 1) // (ADC) Selected TRGSEL = TIAO0 | |
#define AT91C_ADC_TRGSEL_TIOA1 ((unsigned int) 0x1 << 1) // (ADC) Selected TRGSEL = TIAO1 | |
#define AT91C_ADC_TRGSEL_TIOA2 ((unsigned int) 0x2 << 1) // (ADC) Selected TRGSEL = TIAO2 | |
#define AT91C_ADC_TRGSEL_TIOA3 ((unsigned int) 0x3 << 1) // (ADC) Selected TRGSEL = TIAO3 | |
#define AT91C_ADC_TRGSEL_TIOA4 ((unsigned int) 0x4 << 1) // (ADC) Selected TRGSEL = TIAO4 | |
#define AT91C_ADC_TRGSEL_TIOA5 ((unsigned int) 0x5 << 1) // (ADC) Selected TRGSEL = TIAO5 | |
#define AT91C_ADC_TRGSEL_EXT ((unsigned int) 0x6 << 1) // (ADC) Selected TRGSEL = External Trigger | |
#define AT91C_ADC_LOWRES ((unsigned int) 0x1 << 4) // (ADC) Resolution. | |
#define AT91C_ADC_LOWRES_10_BIT ((unsigned int) 0x0 << 4) // (ADC) 10-bit resolution | |
#define AT91C_ADC_LOWRES_8_BIT ((unsigned int) 0x1 << 4) // (ADC) 8-bit resolution | |
#define AT91C_ADC_SLEEP ((unsigned int) 0x1 << 5) // (ADC) Sleep Mode | |
#define AT91C_ADC_SLEEP_NORMAL_MODE ((unsigned int) 0x0 << 5) // (ADC) Normal Mode | |
#define AT91C_ADC_SLEEP_MODE ((unsigned int) 0x1 << 5) // (ADC) Sleep Mode | |
#define AT91C_ADC_PRESCAL ((unsigned int) 0x3F << 8) // (ADC) Prescaler rate selection | |
#define AT91C_ADC_STARTUP ((unsigned int) 0x1F << 16) // (ADC) Startup Time | |
#define AT91C_ADC_SHTIM ((unsigned int) 0xF << 24) // (ADC) Sample & Hold Time | |
// -------- ADC_CHER : (ADC Offset: 0x10) ADC Channel Enable Register -------- | |
#define AT91C_ADC_CH0 ((unsigned int) 0x1 << 0) // (ADC) Channel 0 | |
#define AT91C_ADC_CH1 ((unsigned int) 0x1 << 1) // (ADC) Channel 1 | |
#define AT91C_ADC_CH2 ((unsigned int) 0x1 << 2) // (ADC) Channel 2 | |
#define AT91C_ADC_CH3 ((unsigned int) 0x1 << 3) // (ADC) Channel 3 | |
#define AT91C_ADC_CH4 ((unsigned int) 0x1 << 4) // (ADC) Channel 4 | |
#define AT91C_ADC_CH5 ((unsigned int) 0x1 << 5) // (ADC) Channel 5 | |
#define AT91C_ADC_CH6 ((unsigned int) 0x1 << 6) // (ADC) Channel 6 | |
#define AT91C_ADC_CH7 ((unsigned int) 0x1 << 7) // (ADC) Channel 7 | |
// -------- ADC_CHDR : (ADC Offset: 0x14) ADC Channel Disable Register -------- | |
// -------- ADC_CHSR : (ADC Offset: 0x18) ADC Channel Status Register -------- | |
// -------- ADC_SR : (ADC Offset: 0x1c) ADC Status Register -------- | |
#define AT91C_ADC_EOC0 ((unsigned int) 0x1 << 0) // (ADC) End of Conversion | |
#define AT91C_ADC_EOC1 ((unsigned int) 0x1 << 1) // (ADC) End of Conversion | |
#define AT91C_ADC_EOC2 ((unsigned int) 0x1 << 2) // (ADC) End of Conversion | |
#define AT91C_ADC_EOC3 ((unsigned int) 0x1 << 3) // (ADC) End of Conversion | |
#define AT91C_ADC_EOC4 ((unsigned int) 0x1 << 4) // (ADC) End of Conversion | |
#define AT91C_ADC_EOC5 ((unsigned int) 0x1 << 5) // (ADC) End of Conversion | |
#define AT91C_ADC_EOC6 ((unsigned int) 0x1 << 6) // (ADC) End of Conversion | |
#define AT91C_ADC_EOC7 ((unsigned int) 0x1 << 7) // (ADC) End of Conversion | |
#define AT91C_ADC_OVRE0 ((unsigned int) 0x1 << 8) // (ADC) Overrun Error | |
#define AT91C_ADC_OVRE1 ((unsigned int) 0x1 << 9) // (ADC) Overrun Error | |
#define AT91C_ADC_OVRE2 ((unsigned int) 0x1 << 10) // (ADC) Overrun Error | |
#define AT91C_ADC_OVRE3 ((unsigned int) 0x1 << 11) // (ADC) Overrun Error | |
#define AT91C_ADC_OVRE4 ((unsigned int) 0x1 << 12) // (ADC) Overrun Error | |
#define AT91C_ADC_OVRE5 ((unsigned int) 0x1 << 13) // (ADC) Overrun Error | |
#define AT91C_ADC_OVRE6 ((unsigned int) 0x1 << 14) // (ADC) Overrun Error | |
#define AT91C_ADC_OVRE7 ((unsigned int) 0x1 << 15) // (ADC) Overrun Error | |
#define AT91C_ADC_DRDY ((unsigned int) 0x1 << 16) // (ADC) Data Ready | |
#define AT91C_ADC_GOVRE ((unsigned int) 0x1 << 17) // (ADC) General Overrun | |
#define AT91C_ADC_ENDRX ((unsigned int) 0x1 << 18) // (ADC) End of Receiver Transfer | |
#define AT91C_ADC_RXBUFF ((unsigned int) 0x1 << 19) // (ADC) RXBUFF Interrupt | |
// -------- ADC_LCDR : (ADC Offset: 0x20) ADC Last Converted Data Register -------- | |
#define AT91C_ADC_LDATA ((unsigned int) 0x3FF << 0) // (ADC) Last Data Converted | |
// -------- ADC_IER : (ADC Offset: 0x24) ADC Interrupt Enable Register -------- | |
// -------- ADC_IDR : (ADC Offset: 0x28) ADC Interrupt Disable Register -------- | |
// -------- ADC_IMR : (ADC Offset: 0x2c) ADC Interrupt Mask Register -------- | |
// -------- ADC_CDR0 : (ADC Offset: 0x30) ADC Channel Data Register 0 -------- | |
#define AT91C_ADC_DATA ((unsigned int) 0x3FF << 0) // (ADC) Converted Data | |
// -------- ADC_CDR1 : (ADC Offset: 0x34) ADC Channel Data Register 1 -------- | |
// -------- ADC_CDR2 : (ADC Offset: 0x38) ADC Channel Data Register 2 -------- | |
// -------- ADC_CDR3 : (ADC Offset: 0x3c) ADC Channel Data Register 3 -------- | |
// -------- ADC_CDR4 : (ADC Offset: 0x40) ADC Channel Data Register 4 -------- | |
// -------- ADC_CDR5 : (ADC Offset: 0x44) ADC Channel Data Register 5 -------- | |
// -------- ADC_CDR6 : (ADC Offset: 0x48) ADC Channel Data Register 6 -------- | |
// -------- ADC_CDR7 : (ADC Offset: 0x4c) ADC Channel Data Register 7 -------- | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Advanced Encryption Standard | |
// ***************************************************************************** | |
typedef struct _AT91S_AES { | |
AT91_REG AES_CR; // Control Register | |
AT91_REG AES_MR; // Mode Register | |
AT91_REG Reserved0[2]; // | |
AT91_REG AES_IER; // Interrupt Enable Register | |
AT91_REG AES_IDR; // Interrupt Disable Register | |
AT91_REG AES_IMR; // Interrupt Mask Register | |
AT91_REG AES_ISR; // Interrupt Status Register | |
AT91_REG AES_KEYWxR[4]; // Key Word x Register | |
AT91_REG Reserved1[4]; // | |
AT91_REG AES_IDATAxR[4]; // Input Data x Register | |
AT91_REG AES_ODATAxR[4]; // Output Data x Register | |
AT91_REG AES_IVxR[4]; // Initialization Vector x Register | |
AT91_REG Reserved2[35]; // | |
AT91_REG AES_VR; // AES Version Register | |
AT91_REG AES_RPR; // Receive Pointer Register | |
AT91_REG AES_RCR; // Receive Counter Register | |
AT91_REG AES_TPR; // Transmit Pointer Register | |
AT91_REG AES_TCR; // Transmit Counter Register | |
AT91_REG AES_RNPR; // Receive Next Pointer Register | |
AT91_REG AES_RNCR; // Receive Next Counter Register | |
AT91_REG AES_TNPR; // Transmit Next Pointer Register | |
AT91_REG AES_TNCR; // Transmit Next Counter Register | |
AT91_REG AES_PTCR; // PDC Transfer Control Register | |
AT91_REG AES_PTSR; // PDC Transfer Status Register | |
} AT91S_AES, *AT91PS_AES; | |
// -------- AES_CR : (AES Offset: 0x0) Control Register -------- | |
#define AT91C_AES_START ((unsigned int) 0x1 << 0) // (AES) Starts Processing | |
#define AT91C_AES_SWRST ((unsigned int) 0x1 << 8) // (AES) Software Reset | |
#define AT91C_AES_LOADSEED ((unsigned int) 0x1 << 16) // (AES) Random Number Generator Seed Loading | |
// -------- AES_MR : (AES Offset: 0x4) Mode Register -------- | |
#define AT91C_AES_CIPHER ((unsigned int) 0x1 << 0) // (AES) Processing Mode | |
#define AT91C_AES_PROCDLY ((unsigned int) 0xF << 4) // (AES) Processing Delay | |
#define AT91C_AES_SMOD ((unsigned int) 0x3 << 8) // (AES) Start Mode | |
#define AT91C_AES_SMOD_MANUAL ((unsigned int) 0x0 << 8) // (AES) Manual Mode: The START bit in register AES_CR must be set to begin encryption or decryption. | |
#define AT91C_AES_SMOD_AUTO ((unsigned int) 0x1 << 8) // (AES) Auto Mode: no action in AES_CR is necessary (cf datasheet). | |
#define AT91C_AES_SMOD_PDC ((unsigned int) 0x2 << 8) // (AES) PDC Mode (cf datasheet). | |
#define AT91C_AES_OPMOD ((unsigned int) 0x7 << 12) // (AES) Operation Mode | |
#define AT91C_AES_OPMOD_ECB ((unsigned int) 0x0 << 12) // (AES) ECB Electronic CodeBook mode. | |
#define AT91C_AES_OPMOD_CBC ((unsigned int) 0x1 << 12) // (AES) CBC Cipher Block Chaining mode. | |
#define AT91C_AES_OPMOD_OFB ((unsigned int) 0x2 << 12) // (AES) OFB Output Feedback mode. | |
#define AT91C_AES_OPMOD_CFB ((unsigned int) 0x3 << 12) // (AES) CFB Cipher Feedback mode. | |
#define AT91C_AES_OPMOD_CTR ((unsigned int) 0x4 << 12) // (AES) CTR Counter mode. | |
#define AT91C_AES_LOD ((unsigned int) 0x1 << 15) // (AES) Last Output Data Mode | |
#define AT91C_AES_CFBS ((unsigned int) 0x7 << 16) // (AES) Cipher Feedback Data Size | |
#define AT91C_AES_CFBS_128_BIT ((unsigned int) 0x0 << 16) // (AES) 128-bit. | |
#define AT91C_AES_CFBS_64_BIT ((unsigned int) 0x1 << 16) // (AES) 64-bit. | |
#define AT91C_AES_CFBS_32_BIT ((unsigned int) 0x2 << 16) // (AES) 32-bit. | |
#define AT91C_AES_CFBS_16_BIT ((unsigned int) 0x3 << 16) // (AES) 16-bit. | |
#define AT91C_AES_CFBS_8_BIT ((unsigned int) 0x4 << 16) // (AES) 8-bit. | |
#define AT91C_AES_CKEY ((unsigned int) 0xF << 20) // (AES) Countermeasure Key | |
#define AT91C_AES_CTYPE ((unsigned int) 0x1F << 24) // (AES) Countermeasure Type | |
#define AT91C_AES_CTYPE_TYPE1_EN ((unsigned int) 0x1 << 24) // (AES) Countermeasure type 1 is enabled. | |
#define AT91C_AES_CTYPE_TYPE2_EN ((unsigned int) 0x2 << 24) // (AES) Countermeasure type 2 is enabled. | |
#define AT91C_AES_CTYPE_TYPE3_EN ((unsigned int) 0x4 << 24) // (AES) Countermeasure type 3 is enabled. | |
#define AT91C_AES_CTYPE_TYPE4_EN ((unsigned int) 0x8 << 24) // (AES) Countermeasure type 4 is enabled. | |
#define AT91C_AES_CTYPE_TYPE5_EN ((unsigned int) 0x10 << 24) // (AES) Countermeasure type 5 is enabled. | |
// -------- AES_IER : (AES Offset: 0x10) Interrupt Enable Register -------- | |
#define AT91C_AES_DATRDY ((unsigned int) 0x1 << 0) // (AES) DATRDY | |
#define AT91C_AES_ENDRX ((unsigned int) 0x1 << 1) // (AES) PDC Read Buffer End | |
#define AT91C_AES_ENDTX ((unsigned int) 0x1 << 2) // (AES) PDC Write Buffer End | |
#define AT91C_AES_RXBUFF ((unsigned int) 0x1 << 3) // (AES) PDC Read Buffer Full | |
#define AT91C_AES_TXBUFE ((unsigned int) 0x1 << 4) // (AES) PDC Write Buffer Empty | |
#define AT91C_AES_URAD ((unsigned int) 0x1 << 8) // (AES) Unspecified Register Access Detection | |
// -------- AES_IDR : (AES Offset: 0x14) Interrupt Disable Register -------- | |
// -------- AES_IMR : (AES Offset: 0x18) Interrupt Mask Register -------- | |
// -------- AES_ISR : (AES Offset: 0x1c) Interrupt Status Register -------- | |
#define AT91C_AES_URAT ((unsigned int) 0x7 << 12) // (AES) Unspecified Register Access Type Status | |
#define AT91C_AES_URAT_IN_DAT_WRITE_DATPROC ((unsigned int) 0x0 << 12) // (AES) Input data register written during the data processing in PDC mode. | |
#define AT91C_AES_URAT_OUT_DAT_READ_DATPROC ((unsigned int) 0x1 << 12) // (AES) Output data register read during the data processing. | |
#define AT91C_AES_URAT_MODEREG_WRITE_DATPROC ((unsigned int) 0x2 << 12) // (AES) Mode register written during the data processing. | |
#define AT91C_AES_URAT_OUT_DAT_READ_SUBKEY ((unsigned int) 0x3 << 12) // (AES) Output data register read during the sub-keys generation. | |
#define AT91C_AES_URAT_MODEREG_WRITE_SUBKEY ((unsigned int) 0x4 << 12) // (AES) Mode register written during the sub-keys generation. | |
#define AT91C_AES_URAT_WO_REG_READ ((unsigned int) 0x5 << 12) // (AES) Write-only register read access. | |
// ***************************************************************************** | |
// SOFTWARE API DEFINITION FOR Triple Data Encryption Standard | |
// ***************************************************************************** | |
typedef struct _AT91S_TDES { | |
AT91_REG TDES_CR; // Control Register | |
AT91_REG TDES_MR; // Mode Register | |
AT91_REG Reserved0[2]; // | |
AT91_REG TDES_IER; // Interrupt Enable Register | |
AT91_REG TDES_IDR; // Interrupt Disable Register | |
AT91_REG TDES_IMR; // Interrupt Mask Register | |
AT91_REG TDES_ISR; // Interrupt Status Register | |
AT91_REG TDES_KEY1WxR[2]; // Key 1 Word x Register | |
AT91_REG TDES_KEY2WxR[2]; // Key 2 Word x Register | |
AT91_REG TDES_KEY3WxR[2]; // Key 3 Word x Register | |
AT91_REG Reserved1[2]; // | |
AT91_REG TDES_IDATAxR[2]; // Input Data x Register | |
AT91_REG Reserved2[2]; // | |
AT91_REG TDES_ODATAxR[2]; // Output Data x Register | |
AT91_REG Reserved3[2]; // | |
AT91_REG TDES_IVxR[2]; // Initialization Vector x Register | |
AT91_REG Reserved4[37]; // | |
AT91_REG TDES_VR; // TDES Version Register | |
AT91_REG TDES_RPR; // Receive Pointer Register | |
AT91_REG TDES_RCR; // Receive Counter Register | |
AT91_REG TDES_TPR; // Transmit Pointer Register | |
AT91_REG TDES_TCR; // Transmit Counter Register | |
AT91_REG TDES_RNPR; // Receive Next Pointer Register | |
AT91_REG TDES_RNCR; // Receive Next Counter Register | |
AT91_REG TDES_TNPR; // Transmit Next Pointer Register | |
AT91_REG TDES_TNCR; // Transmit Next Counter Register | |
AT91_REG TDES_PTCR; // PDC Transfer Control Register | |
AT91_REG TDES_PTSR; // PDC Transfer Status Register | |
} AT91S_TDES, *AT91PS_TDES; | |
// -------- TDES_CR : (TDES Offset: 0x0) Control Register -------- | |
#define AT91C_TDES_START ((unsigned int) 0x1 << 0) // (TDES) Starts Processing | |
#define AT91C_TDES_SWRST ((unsigned int) 0x1 << 8) // (TDES) Software Reset | |
// -------- TDES_MR : (TDES Offset: 0x4) Mode Register -------- | |
#define AT91C_TDES_CIPHER ((unsigned int) 0x1 << 0) // (TDES) Processing Mode | |
#define AT91C_TDES_TDESMOD ((unsigned int) 0x1 << 1) // (TDES) Single or Triple DES Mode | |
#define AT91C_TDES_KEYMOD ((unsigned int) 0x1 << 4) // (TDES) Key Mode | |
#define AT91C_TDES_SMOD ((unsigned int) 0x3 << 8) // (TDES) Start Mode | |
#define AT91C_TDES_SMOD_MANUAL ((unsigned int) 0x0 << 8) // (TDES) Manual Mode: The START bit in register TDES_CR must be set to begin encryption or decryption. | |
#define AT91C_TDES_SMOD_AUTO ((unsigned int) 0x1 << 8) // (TDES) Auto Mode: no action in TDES_CR is necessary (cf datasheet). | |
#define AT91C_TDES_SMOD_PDC ((unsigned int) 0x2 << 8) // (TDES) PDC Mode (cf datasheet). | |
#define AT91C_TDES_OPMOD ((unsigned int) 0x3 << 12) // (TDES) Operation Mode | |
#define AT91C_TDES_OPMOD_ECB ((unsigned int) 0x0 << 12) // (TDES) ECB Electronic CodeBook mode. | |
#define AT91C_TDES_OPMOD_CBC ((unsigned int) 0x1 << 12) // (TDES) CBC Cipher Block Chaining mode. | |
#define AT91C_TDES_OPMOD_OFB ((unsigned int) 0x2 << 12) // (TDES) OFB Output Feedback mode. | |
#define AT91C_TDES_OPMOD_CFB ((unsigned int) 0x3 << 12) // (TDES) CFB Cipher Feedback mode. | |
#define AT91C_TDES_LOD ((unsigned int) 0x1 << 15) // (TDES) Last Output Data Mode | |
#define AT91C_TDES_CFBS ((unsigned int) 0x3 << 16) // (TDES) Cipher Feedback Data Size | |
#define AT91C_TDES_CFBS_64_BIT ((unsigned int) 0x0 << 16) // (TDES) 64-bit. | |
#define AT91C_TDES_CFBS_32_BIT ((unsigned int) 0x1 << 16) // (TDES) 32-bit. | |
#define AT91C_TDES_CFBS_16_BIT ((unsigned int) 0x2 << 16) // (TDES) 16-bit. | |
#define AT91C_TDES_CFBS_8_BIT ((unsigned int) 0x3 << 16) // (TDES) 8-bit. | |
// -------- TDES_IER : (TDES Offset: 0x10) Interrupt Enable Register -------- | |
#define AT91C_TDES_DATRDY ((unsigned int) 0x1 << 0) // (TDES) DATRDY | |
#define AT91C_TDES_ENDRX ((unsigned int) 0x1 << 1) // (TDES) PDC Read Buffer End | |
#define AT91C_TDES_ENDTX ((unsigned int) 0x1 << 2) // (TDES) PDC Write Buffer End | |
#define AT91C_TDES_RXBUFF ((unsigned int) 0x1 << 3) // (TDES) PDC Read Buffer Full | |
#define AT91C_TDES_TXBUFE ((unsigned int) 0x1 << 4) // (TDES) PDC Write Buffer Empty | |
#define AT91C_TDES_URAD ((unsigned int) 0x1 << 8) // (TDES) Unspecified Register Access Detection | |
// -------- TDES_IDR : (TDES Offset: 0x14) Interrupt Disable Register -------- | |
// -------- TDES_IMR : (TDES Offset: 0x18) Interrupt Mask Register -------- | |
// -------- TDES_ISR : (TDES Offset: 0x1c) Interrupt Status Register -------- | |
#define AT91C_TDES_URAT ((unsigned int) 0x3 << 12) // (TDES) Unspecified Register Access Type Status | |
#define AT91C_TDES_URAT_IN_DAT_WRITE_DATPROC ((unsigned int) 0x0 << 12) // (TDES) Input data register written during the data processing in PDC mode. | |
#define AT91C_TDES_URAT_OUT_DAT_READ_DATPROC ((unsigned int) 0x1 << 12) // (TDES) Output data register read during the data processing. | |
#define AT91C_TDES_URAT_MODEREG_WRITE_DATPROC ((unsigned int) 0x2 << 12) // (TDES) Mode register written during the data processing. | |
#define AT91C_TDES_URAT_WO_REG_READ ((unsigned int) 0x3 << 12) // (TDES) Write-only register read access. | |
// ***************************************************************************** | |
// REGISTER ADDRESS DEFINITION FOR AT91SAM7X128 | |
// ***************************************************************************** | |
// ========== Register definition for SYS peripheral ========== | |
// ========== Register definition for AIC peripheral ========== | |
#define AT91C_AIC_IVR ((AT91_REG *) 0xFFFFF100) // (AIC) IRQ Vector Register | |
#define AT91C_AIC_SMR ((AT91_REG *) 0xFFFFF000) // (AIC) Source Mode Register | |
#define AT91C_AIC_FVR ((AT91_REG *) 0xFFFFF104) // (AIC) FIQ Vector Register | |
#define AT91C_AIC_DCR ((AT91_REG *) 0xFFFFF138) // (AIC) Debug Control Register (Protect) | |
#define AT91C_AIC_EOICR ((AT91_REG *) 0xFFFFF130) // (AIC) End of Interrupt Command Register | |
#define AT91C_AIC_SVR ((AT91_REG *) 0xFFFFF080) // (AIC) Source Vector Register | |
#define AT91C_AIC_FFSR ((AT91_REG *) 0xFFFFF148) // (AIC) Fast Forcing Status Register | |
#define AT91C_AIC_ICCR ((AT91_REG *) 0xFFFFF128) // (AIC) Interrupt Clear Command Register | |
#define AT91C_AIC_ISR ((AT91_REG *) 0xFFFFF108) // (AIC) Interrupt Status Register | |
#define AT91C_AIC_IMR ((AT91_REG *) 0xFFFFF110) // (AIC) Interrupt Mask Register | |
#define AT91C_AIC_IPR ((AT91_REG *) 0xFFFFF10C) // (AIC) Interrupt Pending Register | |
#define AT91C_AIC_FFER ((AT91_REG *) 0xFFFFF140) // (AIC) Fast Forcing Enable Register | |
#define AT91C_AIC_IECR ((AT91_REG *) 0xFFFFF120) // (AIC) Interrupt Enable Command Register | |
#define AT91C_AIC_ISCR ((AT91_REG *) 0xFFFFF12C) // (AIC) Interrupt Set Command Register | |
#define AT91C_AIC_FFDR ((AT91_REG *) 0xFFFFF144) // (AIC) Fast Forcing Disable Register | |
#define AT91C_AIC_CISR ((AT91_REG *) 0xFFFFF114) // (AIC) Core Interrupt Status Register | |
#define AT91C_AIC_IDCR ((AT91_REG *) 0xFFFFF124) // (AIC) Interrupt Disable Command Register | |
#define AT91C_AIC_SPU ((AT91_REG *) 0xFFFFF134) // (AIC) Spurious Vector Register | |
// ========== Register definition for PDC_DBGU peripheral ========== | |
#define AT91C_DBGU_TCR ((AT91_REG *) 0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register | |
#define AT91C_DBGU_RNPR ((AT91_REG *) 0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register | |
#define AT91C_DBGU_TNPR ((AT91_REG *) 0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register | |
#define AT91C_DBGU_TPR ((AT91_REG *) 0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register | |
#define AT91C_DBGU_RPR ((AT91_REG *) 0xFFFFF300) // (PDC_DBGU) Receive Pointer Register | |
#define AT91C_DBGU_RCR ((AT91_REG *) 0xFFFFF304) // (PDC_DBGU) Receive Counter Register | |
#define AT91C_DBGU_RNCR ((AT91_REG *) 0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register | |
#define AT91C_DBGU_PTCR ((AT91_REG *) 0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register | |
#define AT91C_DBGU_PTSR ((AT91_REG *) 0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register | |
#define AT91C_DBGU_TNCR ((AT91_REG *) 0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register | |
// ========== Register definition for DBGU peripheral ========== | |
#define AT91C_DBGU_EXID ((AT91_REG *) 0xFFFFF244) // (DBGU) Chip ID Extension Register | |
#define AT91C_DBGU_BRGR ((AT91_REG *) 0xFFFFF220) // (DBGU) Baud Rate Generator Register | |
#define AT91C_DBGU_IDR ((AT91_REG *) 0xFFFFF20C) // (DBGU) Interrupt Disable Register | |
#define AT91C_DBGU_CSR ((AT91_REG *) 0xFFFFF214) // (DBGU) Channel Status Register | |
#define AT91C_DBGU_CIDR ((AT91_REG *) 0xFFFFF240) // (DBGU) Chip ID Register | |
#define AT91C_DBGU_MR ((AT91_REG *) 0xFFFFF204) // (DBGU) Mode Register | |
#define AT91C_DBGU_IMR ((AT91_REG *) 0xFFFFF210) // (DBGU) Interrupt Mask Register | |
#define AT91C_DBGU_CR ((AT91_REG *) 0xFFFFF200) // (DBGU) Control Register | |
#define AT91C_DBGU_FNTR ((AT91_REG *) 0xFFFFF248) // (DBGU) Force NTRST Register | |
#define AT91C_DBGU_THR ((AT91_REG *) 0xFFFFF21C) // (DBGU) Transmitter Holding Register | |
#define AT91C_DBGU_RHR ((AT91_REG *) 0xFFFFF218) // (DBGU) Receiver Holding Register | |
#define AT91C_DBGU_IER ((AT91_REG *) 0xFFFFF208) // (DBGU) Interrupt Enable Register | |
// ========== Register definition for PIOA peripheral ========== | |
#define AT91C_PIOA_ODR ((AT91_REG *) 0xFFFFF414) // (PIOA) Output Disable Registerr | |
#define AT91C_PIOA_SODR ((AT91_REG *) 0xFFFFF430) // (PIOA) Set Output Data Register | |
#define AT91C_PIOA_ISR ((AT91_REG *) 0xFFFFF44C) // (PIOA) Interrupt Status Register | |
#define AT91C_PIOA_ABSR ((AT91_REG *) 0xFFFFF478) // (PIOA) AB Select Status Register | |
#define AT91C_PIOA_IER ((AT91_REG *) 0xFFFFF440) // (PIOA) Interrupt Enable Register | |
#define AT91C_PIOA_PPUDR ((AT91_REG *) 0xFFFFF460) // (PIOA) Pull-up Disable Register | |
#define AT91C_PIOA_IMR ((AT91_REG *) 0xFFFFF448) // (PIOA) Interrupt Mask Register | |
#define AT91C_PIOA_PER ((AT91_REG *) 0xFFFFF400) // (PIOA) PIO Enable Register | |
#define AT91C_PIOA_IFDR ((AT91_REG *) 0xFFFFF424) // (PIOA) Input Filter Disable Register | |
#define AT91C_PIOA_OWDR ((AT91_REG *) 0xFFFFF4A4) // (PIOA) Output Write Disable Register | |
#define AT91C_PIOA_MDSR ((AT91_REG *) 0xFFFFF458) // (PIOA) Multi-driver Status Register | |
#define AT91C_PIOA_IDR ((AT91_REG *) 0xFFFFF444) // (PIOA) Interrupt Disable Register | |
#define AT91C_PIOA_ODSR ((AT91_REG *) 0xFFFFF438) // (PIOA) Output Data Status Register | |
#define AT91C_PIOA_PPUSR ((AT91_REG *) 0xFFFFF468) // (PIOA) Pull-up Status Register | |
#define AT91C_PIOA_OWSR ((AT91_REG *) 0xFFFFF4A8) // (PIOA) Output Write Status Register | |
#define AT91C_PIOA_BSR ((AT91_REG *) 0xFFFFF474) // (PIOA) Select B Register | |
#define AT91C_PIOA_OWER ((AT91_REG *) 0xFFFFF4A0) // (PIOA) Output Write Enable Register | |
#define AT91C_PIOA_IFER ((AT91_REG *) 0xFFFFF420) // (PIOA) Input Filter Enable Register | |
#define AT91C_PIOA_PDSR ((AT91_REG *) 0xFFFFF43C) // (PIOA) Pin Data Status Register | |
#define AT91C_PIOA_PPUER ((AT91_REG *) 0xFFFFF464) // (PIOA) Pull-up Enable Register | |
#define AT91C_PIOA_OSR ((AT91_REG *) 0xFFFFF418) // (PIOA) Output Status Register | |
#define AT91C_PIOA_ASR ((AT91_REG *) 0xFFFFF470) // (PIOA) Select A Register | |
#define AT91C_PIOA_MDDR ((AT91_REG *) 0xFFFFF454) // (PIOA) Multi-driver Disable Register | |
#define AT91C_PIOA_CODR ((AT91_REG *) 0xFFFFF434) // (PIOA) Clear Output Data Register | |
#define AT91C_PIOA_MDER ((AT91_REG *) 0xFFFFF450) // (PIOA) Multi-driver Enable Register | |
#define AT91C_PIOA_PDR ((AT91_REG *) 0xFFFFF404) // (PIOA) PIO Disable Register | |
#define AT91C_PIOA_IFSR ((AT91_REG *) 0xFFFFF428) // (PIOA) Input Filter Status Register | |
#define AT91C_PIOA_OER ((AT91_REG *) 0xFFFFF410) // (PIOA) Output Enable Register | |
#define AT91C_PIOA_PSR ((AT91_REG *) 0xFFFFF408) // (PIOA) PIO Status Register | |
// ========== Register definition for PIOB peripheral ========== | |
#define AT91C_PIOB_OWDR ((AT91_REG *) 0xFFFFF6A4) // (PIOB) Output Write Disable Register | |
#define AT91C_PIOB_MDER ((AT91_REG *) 0xFFFFF650) // (PIOB) Multi-driver Enable Register | |
#define AT91C_PIOB_PPUSR ((AT91_REG *) 0xFFFFF668) // (PIOB) Pull-up Status Register | |
#define AT91C_PIOB_IMR ((AT91_REG *) 0xFFFFF648) // (PIOB) Interrupt Mask Register | |
#define AT91C_PIOB_ASR ((AT91_REG *) 0xFFFFF670) // (PIOB) Select A Register | |
#define AT91C_PIOB_PPUDR ((AT91_REG *) 0xFFFFF660) // (PIOB) Pull-up Disable Register | |
#define AT91C_PIOB_PSR ((AT91_REG *) 0xFFFFF608) // (PIOB) PIO Status Register | |
#define AT91C_PIOB_IER ((AT91_REG *) 0xFFFFF640) // (PIOB) Interrupt Enable Register | |
#define AT91C_PIOB_CODR ((AT91_REG *) 0xFFFFF634) // (PIOB) Clear Output Data Register | |
#define AT91C_PIOB_OWER ((AT91_REG *) 0xFFFFF6A0) // (PIOB) Output Write Enable Register | |
#define AT91C_PIOB_ABSR ((AT91_REG *) 0xFFFFF678) // (PIOB) AB Select Status Register | |
#define AT91C_PIOB_IFDR ((AT91_REG *) 0xFFFFF624) // (PIOB) Input Filter Disable Register | |
#define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) // (PIOB) Pin Data Status Register | |
#define AT91C_PIOB_IDR ((AT91_REG *) 0xFFFFF644) // (PIOB) Interrupt Disable Register | |
#define AT91C_PIOB_OWSR ((AT91_REG *) 0xFFFFF6A8) // (PIOB) Output Write Status Register | |
#define AT91C_PIOB_PDR ((AT91_REG *) 0xFFFFF604) // (PIOB) PIO Disable Register | |
#define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) // (PIOB) Output Disable Registerr | |
#define AT91C_PIOB_IFSR ((AT91_REG *) 0xFFFFF628) // (PIOB) Input Filter Status Register | |
#define AT91C_PIOB_PPUER ((AT91_REG *) 0xFFFFF664) // (PIOB) Pull-up Enable Register | |
#define AT91C_PIOB_SODR ((AT91_REG *) 0xFFFFF630) // (PIOB) Set Output Data Register | |
#define AT91C_PIOB_ISR ((AT91_REG *) 0xFFFFF64C) // (PIOB) Interrupt Status Register | |
#define AT91C_PIOB_ODSR ((AT91_REG *) 0xFFFFF638) // (PIOB) Output Data Status Register | |
#define AT91C_PIOB_OSR ((AT91_REG *) 0xFFFFF618) // (PIOB) Output Status Register | |
#define AT91C_PIOB_MDSR ((AT91_REG *) 0xFFFFF658) // (PIOB) Multi-driver Status Register | |
#define AT91C_PIOB_IFER ((AT91_REG *) 0xFFFFF620) // (PIOB) Input Filter Enable Register | |
#define AT91C_PIOB_BSR ((AT91_REG *) 0xFFFFF674) // (PIOB) Select B Register | |
#define AT91C_PIOB_MDDR ((AT91_REG *) 0xFFFFF654) // (PIOB) Multi-driver Disable Register | |
#define AT91C_PIOB_OER ((AT91_REG *) 0xFFFFF610) // (PIOB) Output Enable Register | |
#define AT91C_PIOB_PER ((AT91_REG *) 0xFFFFF600) // (PIOB) PIO Enable Register | |
// ========== Register definition for CKGR peripheral ========== | |
#define AT91C_CKGR_MOR ((AT91_REG *) 0xFFFFFC20) // (CKGR) Main Oscillator Register | |
#define AT91C_CKGR_PLLR ((AT91_REG *) 0xFFFFFC2C) // (CKGR) PLL Register | |
#define AT91C_CKGR_MCFR ((AT91_REG *) 0xFFFFFC24) // (CKGR) Main Clock Frequency Register | |
// ========== Register definition for PMC peripheral ========== | |
#define AT91C_PMC_IDR ((AT91_REG *) 0xFFFFFC64) // (PMC) Interrupt Disable Register | |
#define AT91C_PMC_MOR ((AT91_REG *) 0xFFFFFC20) // (PMC) Main Oscillator Register | |
#define AT91C_PMC_PLLR ((AT91_REG *) 0xFFFFFC2C) // (PMC) PLL Register | |
#define AT91C_PMC_PCER ((AT91_REG *) 0xFFFFFC10) // (PMC) Peripheral Clock Enable Register | |
#define AT91C_PMC_PCKR ((AT91_REG *) 0xFFFFFC40) // (PMC) Programmable Clock Register | |
#define AT91C_PMC_MCKR ((AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register | |
#define AT91C_PMC_SCDR ((AT91_REG *) 0xFFFFFC04) // (PMC) System Clock Disable Register | |
#define AT91C_PMC_PCDR ((AT91_REG *) 0xFFFFFC14) // (PMC) Peripheral Clock Disable Register | |
#define AT91C_PMC_SCSR ((AT91_REG *) 0xFFFFFC08) // (PMC) System Clock Status Register | |
#define AT91C_PMC_PCSR ((AT91_REG *) 0xFFFFFC18) // (PMC) Peripheral Clock Status Register | |
#define AT91C_PMC_MCFR ((AT91_REG *) 0xFFFFFC24) // (PMC) Main Clock Frequency Register | |
#define AT91C_PMC_SCER ((AT91_REG *) 0xFFFFFC00) // (PMC) System Clock Enable Register | |
#define AT91C_PMC_IMR ((AT91_REG *) 0xFFFFFC6C) // (PMC) Interrupt Mask Register | |
#define AT91C_PMC_IER ((AT91_REG *) 0xFFFFFC60) // (PMC) Interrupt Enable Register | |
#define AT91C_PMC_SR ((AT91_REG *) 0xFFFFFC68) // (PMC) Status Register | |
// ========== Register definition for RSTC peripheral ========== | |
#define AT91C_RSTC_RCR ((AT91_REG *) 0xFFFFFD00) // (RSTC) Reset Control Register | |
#define AT91C_RSTC_RMR ((AT91_REG *) 0xFFFFFD08) // (RSTC) Reset Mode Register | |
#define AT91C_RSTC_RSR ((AT91_REG *) 0xFFFFFD04) // (RSTC) Reset Status Register | |
// ========== Register definition for RTTC peripheral ========== | |
#define AT91C_RTTC_RTSR ((AT91_REG *) 0xFFFFFD2C) // (RTTC) Real-time Status Register | |
#define AT91C_RTTC_RTMR ((AT91_REG *) 0xFFFFFD20) // (RTTC) Real-time Mode Register | |
#define AT91C_RTTC_RTVR ((AT91_REG *) 0xFFFFFD28) // (RTTC) Real-time Value Register | |
#define AT91C_RTTC_RTAR ((AT91_REG *) 0xFFFFFD24) // (RTTC) Real-time Alarm Register | |
// ========== Register definition for PITC peripheral ========== | |
#define AT91C_PITC_PIVR ((AT91_REG *) 0xFFFFFD38) // (PITC) Period Interval Value Register | |
#define AT91C_PITC_PISR ((AT91_REG *) 0xFFFFFD34) // (PITC) Period Interval Status Register | |
#define AT91C_PITC_PIIR ((AT91_REG *) 0xFFFFFD3C) // (PITC) Period Interval Image Register | |
#define AT91C_PITC_PIMR ((AT91_REG *) 0xFFFFFD30) // (PITC) Period Interval Mode Register | |
// ========== Register definition for WDTC peripheral ========== | |
#define AT91C_WDTC_WDCR ((AT91_REG *) 0xFFFFFD40) // (WDTC) Watchdog Control Register | |
#define AT91C_WDTC_WDSR ((AT91_REG *) 0xFFFFFD48) // (WDTC) Watchdog Status Register | |
#define AT91C_WDTC_WDMR ((AT91_REG *) 0xFFFFFD44) // (WDTC) Watchdog Mode Register | |
// ========== Register definition for VREG peripheral ========== | |
#define AT91C_VREG_MR ((AT91_REG *) 0xFFFFFD60) // (VREG) Voltage Regulator Mode Register | |
// ========== Register definition for MC peripheral ========== | |
#define AT91C_MC_ASR ((AT91_REG *) 0xFFFFFF04) // (MC) MC Abort Status Register | |
#define AT91C_MC_RCR ((AT91_REG *) 0xFFFFFF00) // (MC) MC Remap Control Register | |
#define AT91C_MC_FCR ((AT91_REG *) 0xFFFFFF64) // (MC) MC Flash Command Register | |
#define AT91C_MC_AASR ((AT91_REG *) 0xFFFFFF08) // (MC) MC Abort Address Status Register | |
#define AT91C_MC_FSR ((AT91_REG *) 0xFFFFFF68) // (MC) MC Flash Status Register | |
#define AT91C_MC_FMR ((AT91_REG *) 0xFFFFFF60) // (MC) MC Flash Mode Register | |
// ========== Register definition for PDC_SPI1 peripheral ========== | |
#define AT91C_SPI1_PTCR ((AT91_REG *) 0xFFFE4120) // (PDC_SPI1) PDC Transfer Control Register | |
#define AT91C_SPI1_RPR ((AT91_REG *) 0xFFFE4100) // (PDC_SPI1) Receive Pointer Register | |
#define AT91C_SPI1_TNCR ((AT91_REG *) 0xFFFE411C) // (PDC_SPI1) Transmit Next Counter Register | |
#define AT91C_SPI1_TPR ((AT91_REG *) 0xFFFE4108) // (PDC_SPI1) Transmit Pointer Register | |
#define AT91C_SPI1_TNPR ((AT91_REG *) 0xFFFE4118) // (PDC_SPI1) Transmit Next Pointer Register | |
#define AT91C_SPI1_TCR ((AT91_REG *) 0xFFFE410C) // (PDC_SPI1) Transmit Counter Register | |
#define AT91C_SPI1_RCR ((AT91_REG *) 0xFFFE4104) // (PDC_SPI1) Receive Counter Register | |
#define AT91C_SPI1_RNPR ((AT91_REG *) 0xFFFE4110) // (PDC_SPI1) Receive Next Pointer Register | |
#define AT91C_SPI1_RNCR ((AT91_REG *) 0xFFFE4114) // (PDC_SPI1) Receive Next Counter Register | |
#define AT91C_SPI1_PTSR ((AT91_REG *) 0xFFFE4124) // (PDC_SPI1) PDC Transfer Status Register | |
// ========== Register definition for SPI1 peripheral ========== | |
#define AT91C_SPI1_IMR ((AT91_REG *) 0xFFFE401C) // (SPI1) Interrupt Mask Register | |
#define AT91C_SPI1_IER ((AT91_REG *) 0xFFFE4014) // (SPI1) Interrupt Enable Register | |
#define AT91C_SPI1_MR ((AT91_REG *) 0xFFFE4004) // (SPI1) Mode Register | |
#define AT91C_SPI1_RDR ((AT91_REG *) 0xFFFE4008) // (SPI1) Receive Data Register | |
#define AT91C_SPI1_IDR ((AT91_REG *) 0xFFFE4018) // (SPI1) Interrupt Disable Register | |
#define AT91C_SPI1_SR ((AT91_REG *) 0xFFFE4010) // (SPI1) Status Register | |
#define AT91C_SPI1_TDR ((AT91_REG *) 0xFFFE400C) // (SPI1) Transmit Data Register | |
#define AT91C_SPI1_CR ((AT91_REG *) 0xFFFE4000) // (SPI1) Control Register | |
#define AT91C_SPI1_CSR ((AT91_REG *) 0xFFFE4030) // (SPI1) Chip Select Register | |
// ========== Register definition for PDC_SPI0 peripheral ========== | |
#define AT91C_SPI0_PTCR ((AT91_REG *) 0xFFFE0120) // (PDC_SPI0) PDC Transfer Control Register | |
#define AT91C_SPI0_TPR ((AT91_REG *) 0xFFFE0108) // (PDC_SPI0) Transmit Pointer Register | |
#define AT91C_SPI0_TCR ((AT91_REG *) 0xFFFE010C) // (PDC_SPI0) Transmit Counter Register | |
#define AT91C_SPI0_RCR ((AT91_REG *) 0xFFFE0104) // (PDC_SPI0) Receive Counter Register | |
#define AT91C_SPI0_PTSR ((AT91_REG *) 0xFFFE0124) // (PDC_SPI0) PDC Transfer Status Register | |
#define AT91C_SPI0_RNPR ((AT91_REG *) 0xFFFE0110) // (PDC_SPI0) Receive Next Pointer Register | |
#define AT91C_SPI0_RPR ((AT91_REG *) 0xFFFE0100) // (PDC_SPI0) Receive Pointer Register | |