portable/MPLAB/PIC32MZ/ISR_Support.h - third_party/github/FreeRTOS/FreeRTOS-Kernel - Git at Google

 /*
  * FreeRTOS Kernel V10.3.1
  * Copyright (C) 2020 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy of
  * this software and associated documentation files (the "Software"), to deal in
  * the Software without restriction, including without limitation the rights to
  * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
  * the Software, and to permit persons to whom the Software is furnished to do so,
  * subject to the following conditions:
  *
  * The above copyright notice and this permission notice shall be included in all
  * copies or substantial portions of the Software.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
  * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
  * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
  * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  *
  * http://www.FreeRTOS.org
  * http://aws.amazon.com/freertos
  *
  * 1 tab == 4 spaces!
  */

 #include "FreeRTOSConfig.h"

 #define portCONTEXT_SIZE                160
 #define portEPC_STACK_LOCATION          152
 #define portSTATUS_STACK_LOCATION       156
 #define portFPCSR_STACK_LOCATION        0
 #define portTASK_HAS_FPU_STACK_LOCATION     0
 #define portFPU_CONTEXT_SIZE            264

 /******************************************************************/
 .macro  portSAVE_FPU_REGS    offset, base
     /* Macro to assist with saving just the FPU registers to the
      * specified address and base offset,
      * offset is a constant, base is the base pointer register  */

 	sdc1		$f31, \offset + 248(\base)
 	sdc1		$f30, \offset + 240(\base)
 	sdc1		$f29, \offset + 232(\base)
 	sdc1		$f28, \offset + 224(\base)
 	sdc1		$f27, \offset + 216(\base)
 	sdc1		$f26, \offset + 208(\base)
 	sdc1		$f25, \offset + 200(\base)
 	sdc1		$f24, \offset + 192(\base)
 	sdc1		$f23, \offset + 184(\base)
 	sdc1		$f22, \offset + 176(\base)
 	sdc1		$f21, \offset + 168(\base)
 	sdc1		$f20, \offset + 160(\base)
 	sdc1		$f19, \offset + 152(\base)
 	sdc1		$f18, \offset + 144(\base)
 	sdc1		$f17, \offset + 136(\base)
 	sdc1		$f16, \offset + 128(\base)
 	sdc1		$f15, \offset + 120(\base)
 	sdc1		$f14, \offset + 112(\base)
 	sdc1		$f13, \offset + 104(\base)
 	sdc1		$f12, \offset + 96(\base)
 	sdc1		$f11, \offset + 88(\base)
 	sdc1		$f10, \offset + 80(\base)
 	sdc1		$f9, \offset + 72(\base)
 	sdc1		$f8, \offset + 64(\base)
 	sdc1		$f7, \offset + 56(\base)
 	sdc1		$f6, \offset + 48(\base)
 	sdc1		$f5, \offset + 40(\base)
 	sdc1		$f4, \offset + 32(\base)
 	sdc1		$f3, \offset + 24(\base)
 	sdc1		$f2, \offset + 16(\base)
 	sdc1		$f1, \offset + 8(\base)
 	sdc1		$f0, \offset + 0(\base)

     .endm

 /******************************************************************/
 .macro  portLOAD_FPU_REGS    offset, base
     /* Macro to assist with loading just the FPU registers from the
      * specified address and base offset, offset is a constant,
      * base is the base pointer register  */

 	ldc1		$f0, \offset + 0(\base)
 	ldc1		$f1, \offset + 8(\base)
 	ldc1		$f2, \offset + 16(\base)
 	ldc1		$f3, \offset + 24(\base)
 	ldc1		$f4, \offset + 32(\base)
 	ldc1		$f5, \offset + 40(\base)
 	ldc1		$f6, \offset + 48(\base)
 	ldc1		$f7, \offset + 56(\base)
 	ldc1		$f8, \offset + 64(\base)
 	ldc1		$f9, \offset + 72(\base)
 	ldc1		$f10, \offset + 80(\base)
 	ldc1		$f11, \offset + 88(\base)
 	ldc1		$f12, \offset + 96(\base)
 	ldc1		$f13, \offset + 104(\base)
 	ldc1		$f14, \offset + 112(\base)
 	ldc1		$f15, \offset + 120(\base)
 	ldc1		$f16, \offset + 128(\base)
 	ldc1		$f17, \offset + 136(\base)
 	ldc1		$f18, \offset + 144(\base)
 	ldc1		$f19, \offset + 152(\base)
 	ldc1		$f20, \offset + 160(\base)
 	ldc1		$f21, \offset + 168(\base)
 	ldc1		$f22, \offset + 176(\base)
 	ldc1		$f23, \offset + 184(\base)
 	ldc1		$f24, \offset + 192(\base)
 	ldc1		$f25, \offset + 200(\base)
 	ldc1		$f26, \offset + 208(\base)
 	ldc1		$f27, \offset + 216(\base)
 	ldc1		$f28, \offset + 224(\base)
 	ldc1		$f29, \offset + 232(\base)
 	ldc1		$f30, \offset + 240(\base)
 	ldc1		$f31, \offset + 248(\base)

     .endm

 /******************************************************************/
 .macro	portSAVE_CONTEXT

 	/* Make room for the context. First save the current status so it can be
 	manipulated, and the cause and EPC registers so their original values are
 	captured. */
 	mfc0		k0, _CP0_CAUSE
 	addiu		sp, sp, -portCONTEXT_SIZE

 	#if ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )
 		/* Test if we are already using the system stack. Only tasks may use the
 		FPU so if we are already in a nested interrupt then the FPU context does
 		not require saving. */
 		la			k1, uxInterruptNesting
 		lw			k1, 0(k1)
 		bne			k1, zero, 2f
 		nop

 		/* Test if the current task needs the FPU context saving. */
 		la			k1, ulTaskHasFPUContext
 		lw			k1, 0(k1)
 		beq			k1, zero, 1f
 		nop

 		/* Adjust the stack to account for the additional FPU context.*/
 		addiu		sp, sp, -portFPU_CONTEXT_SIZE

 	1:
 		/* Save the ulTaskHasFPUContext flag. */
 		sw			k1, portTASK_HAS_FPU_STACK_LOCATION(sp)

 	2:
 	#endif

 	mfc0		k1, _CP0_STATUS

 	/* Also save s7, s6 and s5 so they can be used.  Any nesting interrupts
 	should maintain the values of these registers across the ISR. */
 	sw			s7, 48(sp)
 	sw			s6, 44(sp)
 	sw			s5, 40(sp)
 	sw			k1, portSTATUS_STACK_LOCATION(sp)

 	/* Prepare to enable interrupts above the current priority. */
 	srl			k0, k0, 0xa
 	ins 		k1, k0, 10, 7
 	srl			k0, k0, 0x7 /* This copies the MSB of the IPL, but it would be an error if it was set anyway. */
 	ins 		k1, k0, 18, 1
 	ins			k1, zero, 1, 4

 	/* s5 is used as the frame pointer. */
 	add			s5, zero, sp

 	/* Check the nesting count value. */
 	la			k0, uxInterruptNesting
 	lw			s6, (k0)

 	/* If the nesting count is 0 then swap to the the system stack, otherwise
 	the system stack is already being used. */
 	bne			s6, zero, 1f
 	nop

 	/* Swap to the system stack. */
 	la			sp, xISRStackTop
 	lw			sp, (sp)

 	/* Increment and save the nesting count. */
 1:	addiu		s6, s6, 1
 	sw			s6, 0(k0)

 	/* s6 holds the EPC value, this is saved after interrupts are re-enabled. */
 	mfc0 		s6, _CP0_EPC

 	/* Re-enable interrupts. */
 	mtc0		k1, _CP0_STATUS

 	/* Save the context into the space just created.  s6 is saved again
 	here as it now contains the EPC value.  No other s registers need be
 	saved. */
 	sw			ra, 120(s5)
 	sw			s8, 116(s5)
 	sw			t9, 112(s5)
 	sw			t8, 108(s5)
 	sw			t7, 104(s5)
 	sw			t6, 100(s5)
 	sw			t5, 96(s5)
 	sw			t4, 92(s5)
 	sw			t3, 88(s5)
 	sw			t2, 84(s5)
 	sw			t1, 80(s5)
 	sw			t0, 76(s5)
 	sw			a3, 72(s5)
 	sw			a2, 68(s5)
 	sw			a1, 64(s5)
 	sw			a0, 60(s5)
 	sw			v1, 56(s5)
 	sw			v0, 52(s5)
 	sw			s6, portEPC_STACK_LOCATION(s5)
 	sw			$1, 16(s5)

 	/* Save the AC0, AC1, AC2, AC3 registers from the DSP.  s6 is used as a
 	scratch register. */
 	mfhi		s6, $ac1
 	sw			s6, 128(s5)
 	mflo		s6, $ac1
 	sw			s6, 124(s5)

 	mfhi		s6, $ac2
 	sw			s6, 136(s5)
 	mflo		s6, $ac2
 	sw			s6, 132(s5)

 	mfhi		s6, $ac3
 	sw			s6, 144(s5)
 	mflo		s6, $ac3
 	sw			s6, 140(s5)

 	/* Save the DSP Control register */
 	rddsp		s6
 	sw			s6, 148(s5)

 	/* ac0 is done separately to match the MX port. */
 	mfhi		s6, $ac0
 	sw			s6, 12(s5)
 	mflo		s6, $ac0
 	sw			s6, 8(s5)

 	/* Save the FPU context if the nesting count was zero. */
 	#if ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )
 		la			s6, uxInterruptNesting
 		lw			s6, 0(s6)
 		addiu		s6, s6, -1
 		bne			s6, zero, 1f
 		nop

 		/* Test if the current task needs the FPU context saving. */
 		lw			s6, portTASK_HAS_FPU_STACK_LOCATION(s5)
 		beq			s6, zero, 1f
 		nop

 		/* Save the FPU registers. */
 		portSAVE_FPU_REGS ( portCONTEXT_SIZE + 8 ), s5

 		/* Save the FPU status register */
 		cfc1		s6, $f31
 		sw			s6, (portCONTEXT_SIZE + portFPCSR_STACK_LOCATION)(s5)

 		1:
 	#endif

 	/* Update the task stack pointer value if nesting is zero. */
 	la			s6, uxInterruptNesting
 	lw			s6, (s6)
 	addiu		s6, s6, -1
 	bne			s6, zero, 1f
 	nop

 	/* Save the stack pointer. */
 	la			s6, uxSavedTaskStackPointer
 	sw			s5, (s6)
 1:
 	.endm

 /******************************************************************/
 .macro	portRESTORE_CONTEXT

 	/* Restore the stack pointer from the TCB.  This is only done if the
 	nesting count is 1. */
 	la			s6, uxInterruptNesting
 	lw			s6, (s6)
 	addiu		s6, s6, -1
 	bne			s6, zero, 1f
 	nop
 	la			s6, uxSavedTaskStackPointer
 	lw			s5, (s6)

     #if ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )
 		/* Restore the FPU context if required. */
 		lw			s6, portTASK_HAS_FPU_STACK_LOCATION(s5)
 		beq			s6, zero, 1f
 		nop

 		/* Restore the FPU registers. */
 		portLOAD_FPU_REGS   ( portCONTEXT_SIZE + 8 ), s5

 		/* Restore the FPU status register. */
 		lw			s6, ( portCONTEXT_SIZE + portFPCSR_STACK_LOCATION )(s5)
 		ctc1		s6, $f31
    	#endif

 1:

 	/* Restore the context. */
 	lw			s6, 128(s5)
 	mthi		s6, $ac1
 	lw			s6, 124(s5)
 	mtlo		s6, $ac1

 	lw			s6, 136(s5)
 	mthi		s6, $ac2
 	lw			s6, 132(s5)
 	mtlo		s6, $ac2

 	lw			s6, 144(s5)
 	mthi		s6, $ac3
 	lw			s6, 140(s5)
 	mtlo		s6, $ac3

 	/* Restore DSPControl. */
 	lw			s6, 148(s5)
 	wrdsp		s6

 	lw			s6, 8(s5)
 	mtlo		s6, $ac0
 	lw			s6, 12(s5)
 	mthi		s6, $ac0
 	lw			$1, 16(s5)

 	/* s6 is loaded as it was used as a scratch register and therefore saved
 	as part of the interrupt context. */
 	lw			s7, 48(s5)
 	lw			s6, 44(s5)
 	lw			v0, 52(s5)
 	lw			v1, 56(s5)
 	lw			a0, 60(s5)
 	lw			a1, 64(s5)
 	lw			a2, 68(s5)
 	lw			a3, 72(s5)
 	lw			t0, 76(s5)
 	lw			t1, 80(s5)
 	lw			t2, 84(s5)
 	lw			t3, 88(s5)
 	lw			t4, 92(s5)
 	lw			t5, 96(s5)
 	lw			t6, 100(s5)
 	lw			t7, 104(s5)
 	lw			t8, 108(s5)
 	lw			t9, 112(s5)
 	lw			s8, 116(s5)
 	lw			ra, 120(s5)

 	/* Protect access to the k registers, and others. */
 	di
 	ehb

 	/* Decrement the nesting count. */
 	la			k0, uxInterruptNesting
 	lw			k1, (k0)
 	addiu		k1, k1, -1
 	sw			k1, 0(k0)

 	#if ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )
 		/* If the nesting count is now zero then the FPU context may be restored. */
 		bne			k1, zero, 1f
 		nop

 		/* Restore the value of ulTaskHasFPUContext */
 		la			k0, ulTaskHasFPUContext
 		lw			k1, 0(s5)
 		sw			k1, 0(k0)

 		/* If the task does not have an FPU context then adjust the stack normally. */
 		beq			k1, zero, 1f
 		nop

 		/* Restore the STATUS and EPC registers */
 		lw			k0, portSTATUS_STACK_LOCATION(s5)
 		lw			k1, portEPC_STACK_LOCATION(s5)

 		/* Leave the stack in its original state.  First load sp from s5, then
 		restore s5 from the stack. */
 		add			sp, zero, s5
 		lw			s5, 40(sp)

 		/* Adjust the stack pointer to remove the FPU context */
 		addiu		sp, sp,	portFPU_CONTEXT_SIZE
 		beq			zero, zero, 2f
 		nop

 		1:  /* Restore the STATUS and EPC registers */
 		lw			k0, portSTATUS_STACK_LOCATION(s5)
 		lw			k1, portEPC_STACK_LOCATION(s5)

 		/* Leave the stack in its original state.  First load sp from s5, then
 		restore s5 from the stack. */
 		add			sp, zero, s5
 		lw			s5, 40(sp)

 		2:  /* Adjust the stack pointer */
 		addiu		sp, sp, portCONTEXT_SIZE

 	#else

 		/* Restore the frame when there is no hardware FP support. */
 		lw			k0, portSTATUS_STACK_LOCATION(s5)
 		lw			k1, portEPC_STACK_LOCATION(s5)

 		/* Leave the stack in its original state.  First load sp from s5, then
 		restore s5 from the stack. */
 		add			sp, zero, s5
 		lw			s5, 40(sp)

 		addiu		sp, sp,	portCONTEXT_SIZE

 	#endif // ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )

 	mtc0		k0, _CP0_STATUS
 	mtc0 		k1, _CP0_EPC
 	ehb
 	eret
 	nop

 	.endm
	/*
	* FreeRTOS Kernel V10.3.1
	* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
	*
	* Permission is hereby granted, free of charge, to any person obtaining a copy of
	* this software and associated documentation files (the "Software"), to deal in
	* the Software without restriction, including without limitation the rights to
	* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
	* the Software, and to permit persons to whom the Software is furnished to do so,
	* subject to the following conditions:
	*
	* The above copyright notice and this permission notice shall be included in all
	* copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
	* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
	* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
	* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
	* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
	*
	* http://www.FreeRTOS.org
	* http://aws.amazon.com/freertos
	*
	* 1 tab == 4 spaces!
	*/

	#include "FreeRTOSConfig.h"

	#define portCONTEXT_SIZE 160
	#define portEPC_STACK_LOCATION 152
	#define portSTATUS_STACK_LOCATION 156
	#define portFPCSR_STACK_LOCATION 0
	#define portTASK_HAS_FPU_STACK_LOCATION 0
	#define portFPU_CONTEXT_SIZE 264

	/******************************************************************/
	.macro portSAVE_FPU_REGS offset, base
	/* Macro to assist with saving just the FPU registers to the
	* specified address and base offset,
	* offset is a constant, base is the base pointer register */

	sdc1 $f31, \offset + 248(\base)
	sdc1 $f30, \offset + 240(\base)
	sdc1 $f29, \offset + 232(\base)
	sdc1 $f28, \offset + 224(\base)
	sdc1 $f27, \offset + 216(\base)
	sdc1 $f26, \offset + 208(\base)
	sdc1 $f25, \offset + 200(\base)
	sdc1 $f24, \offset + 192(\base)
	sdc1 $f23, \offset + 184(\base)
	sdc1 $f22, \offset + 176(\base)
	sdc1 $f21, \offset + 168(\base)
	sdc1 $f20, \offset + 160(\base)
	sdc1 $f19, \offset + 152(\base)
	sdc1 $f18, \offset + 144(\base)
	sdc1 $f17, \offset + 136(\base)
	sdc1 $f16, \offset + 128(\base)
	sdc1 $f15, \offset + 120(\base)
	sdc1 $f14, \offset + 112(\base)
	sdc1 $f13, \offset + 104(\base)
	sdc1 $f12, \offset + 96(\base)
	sdc1 $f11, \offset + 88(\base)
	sdc1 $f10, \offset + 80(\base)
	sdc1 $f9, \offset + 72(\base)
	sdc1 $f8, \offset + 64(\base)
	sdc1 $f7, \offset + 56(\base)
	sdc1 $f6, \offset + 48(\base)
	sdc1 $f5, \offset + 40(\base)
	sdc1 $f4, \offset + 32(\base)
	sdc1 $f3, \offset + 24(\base)
	sdc1 $f2, \offset + 16(\base)
	sdc1 $f1, \offset + 8(\base)
	sdc1 $f0, \offset + 0(\base)

	.endm

	/******************************************************************/
	.macro portLOAD_FPU_REGS offset, base
	/* Macro to assist with loading just the FPU registers from the
	* specified address and base offset, offset is a constant,
	* base is the base pointer register */

	ldc1 $f0, \offset + 0(\base)
	ldc1 $f1, \offset + 8(\base)
	ldc1 $f2, \offset + 16(\base)
	ldc1 $f3, \offset + 24(\base)
	ldc1 $f4, \offset + 32(\base)
	ldc1 $f5, \offset + 40(\base)
	ldc1 $f6, \offset + 48(\base)
	ldc1 $f7, \offset + 56(\base)
	ldc1 $f8, \offset + 64(\base)
	ldc1 $f9, \offset + 72(\base)
	ldc1 $f10, \offset + 80(\base)
	ldc1 $f11, \offset + 88(\base)
	ldc1 $f12, \offset + 96(\base)
	ldc1 $f13, \offset + 104(\base)
	ldc1 $f14, \offset + 112(\base)
	ldc1 $f15, \offset + 120(\base)
	ldc1 $f16, \offset + 128(\base)
	ldc1 $f17, \offset + 136(\base)
	ldc1 $f18, \offset + 144(\base)
	ldc1 $f19, \offset + 152(\base)
	ldc1 $f20, \offset + 160(\base)
	ldc1 $f21, \offset + 168(\base)
	ldc1 $f22, \offset + 176(\base)
	ldc1 $f23, \offset + 184(\base)
	ldc1 $f24, \offset + 192(\base)
	ldc1 $f25, \offset + 200(\base)
	ldc1 $f26, \offset + 208(\base)
	ldc1 $f27, \offset + 216(\base)
	ldc1 $f28, \offset + 224(\base)
	ldc1 $f29, \offset + 232(\base)
	ldc1 $f30, \offset + 240(\base)
	ldc1 $f31, \offset + 248(\base)

	.endm

	/******************************************************************/
	.macro portSAVE_CONTEXT

	/* Make room for the context. First save the current status so it can be
	manipulated, and the cause and EPC registers so their original values are
	captured. */
	mfc0 k0, _CP0_CAUSE
	addiu sp, sp, -portCONTEXT_SIZE

	#if ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )
	/* Test if we are already using the system stack. Only tasks may use the
	FPU so if we are already in a nested interrupt then the FPU context does
	not require saving. */
	la k1, uxInterruptNesting
	lw k1, 0(k1)
	bne k1, zero, 2f
	nop

	/* Test if the current task needs the FPU context saving. */
	la k1, ulTaskHasFPUContext
	lw k1, 0(k1)
	beq k1, zero, 1f
	nop

	/* Adjust the stack to account for the additional FPU context.*/
	addiu sp, sp, -portFPU_CONTEXT_SIZE

	1:
	/* Save the ulTaskHasFPUContext flag. */
	sw k1, portTASK_HAS_FPU_STACK_LOCATION(sp)

	2:
	#endif

	mfc0 k1, _CP0_STATUS

	/* Also save s7, s6 and s5 so they can be used. Any nesting interrupts
	should maintain the values of these registers across the ISR. */
	sw s7, 48(sp)
	sw s6, 44(sp)
	sw s5, 40(sp)
	sw k1, portSTATUS_STACK_LOCATION(sp)

	/* Prepare to enable interrupts above the current priority. */
	srl k0, k0, 0xa
	ins k1, k0, 10, 7
	srl k0, k0, 0x7 /* This copies the MSB of the IPL, but it would be an error if it was set anyway. */
	ins k1, k0, 18, 1
	ins k1, zero, 1, 4

	/* s5 is used as the frame pointer. */
	add s5, zero, sp

	/* Check the nesting count value. */
	la k0, uxInterruptNesting
	lw s6, (k0)

	/* If the nesting count is 0 then swap to the the system stack, otherwise
	the system stack is already being used. */
	bne s6, zero, 1f
	nop

	/* Swap to the system stack. */
	la sp, xISRStackTop
	lw sp, (sp)

	/* Increment and save the nesting count. */
	1: addiu s6, s6, 1
	sw s6, 0(k0)

	/* s6 holds the EPC value, this is saved after interrupts are re-enabled. */
	mfc0 s6, _CP0_EPC

	/* Re-enable interrupts. */
	mtc0 k1, _CP0_STATUS

	/* Save the context into the space just created. s6 is saved again
	here as it now contains the EPC value. No other s registers need be
	saved. */
	sw ra, 120(s5)
	sw s8, 116(s5)
	sw t9, 112(s5)
	sw t8, 108(s5)
	sw t7, 104(s5)
	sw t6, 100(s5)
	sw t5, 96(s5)
	sw t4, 92(s5)
	sw t3, 88(s5)
	sw t2, 84(s5)
	sw t1, 80(s5)
	sw t0, 76(s5)
	sw a3, 72(s5)
	sw a2, 68(s5)
	sw a1, 64(s5)
	sw a0, 60(s5)
	sw v1, 56(s5)
	sw v0, 52(s5)
	sw s6, portEPC_STACK_LOCATION(s5)
	sw $1, 16(s5)

	/* Save the AC0, AC1, AC2, AC3 registers from the DSP. s6 is used as a
	scratch register. */
	mfhi s6, $ac1
	sw s6, 128(s5)
	mflo s6, $ac1
	sw s6, 124(s5)

	mfhi s6, $ac2
	sw s6, 136(s5)
	mflo s6, $ac2
	sw s6, 132(s5)

	mfhi s6, $ac3
	sw s6, 144(s5)
	mflo s6, $ac3
	sw s6, 140(s5)

	/* Save the DSP Control register */
	rddsp s6
	sw s6, 148(s5)

	/* ac0 is done separately to match the MX port. */
	mfhi s6, $ac0
	sw s6, 12(s5)
	mflo s6, $ac0
	sw s6, 8(s5)

	/* Save the FPU context if the nesting count was zero. */
	#if ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )
	la s6, uxInterruptNesting
	lw s6, 0(s6)
	addiu s6, s6, -1
	bne s6, zero, 1f
	nop

	/* Test if the current task needs the FPU context saving. */
	lw s6, portTASK_HAS_FPU_STACK_LOCATION(s5)
	beq s6, zero, 1f
	nop

	/* Save the FPU registers. */
	portSAVE_FPU_REGS ( portCONTEXT_SIZE + 8 ), s5

	/* Save the FPU status register */
	cfc1 s6, $f31
	sw s6, (portCONTEXT_SIZE + portFPCSR_STACK_LOCATION)(s5)

	1:
	#endif

	/* Update the task stack pointer value if nesting is zero. */
	la s6, uxInterruptNesting
	lw s6, (s6)
	addiu s6, s6, -1
	bne s6, zero, 1f
	nop

	/* Save the stack pointer. */
	la s6, uxSavedTaskStackPointer
	sw s5, (s6)
	1:
	.endm

	/******************************************************************/
	.macro portRESTORE_CONTEXT

	/* Restore the stack pointer from the TCB. This is only done if the
	nesting count is 1. */
	la s6, uxInterruptNesting
	lw s6, (s6)
	addiu s6, s6, -1
	bne s6, zero, 1f
	nop
	la s6, uxSavedTaskStackPointer
	lw s5, (s6)

	#if ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )
	/* Restore the FPU context if required. */
	lw s6, portTASK_HAS_FPU_STACK_LOCATION(s5)
	beq s6, zero, 1f
	nop

	/* Restore the FPU registers. */
	portLOAD_FPU_REGS ( portCONTEXT_SIZE + 8 ), s5

	/* Restore the FPU status register. */
	lw s6, ( portCONTEXT_SIZE + portFPCSR_STACK_LOCATION )(s5)
	ctc1 s6, $f31
	#endif

	1:

	/* Restore the context. */
	lw s6, 128(s5)
	mthi s6, $ac1
	lw s6, 124(s5)
	mtlo s6, $ac1

	lw s6, 136(s5)
	mthi s6, $ac2
	lw s6, 132(s5)
	mtlo s6, $ac2

	lw s6, 144(s5)
	mthi s6, $ac3
	lw s6, 140(s5)
	mtlo s6, $ac3

	/* Restore DSPControl. */
	lw s6, 148(s5)
	wrdsp s6

	lw s6, 8(s5)
	mtlo s6, $ac0
	lw s6, 12(s5)
	mthi s6, $ac0
	lw $1, 16(s5)

	/* s6 is loaded as it was used as a scratch register and therefore saved
	as part of the interrupt context. */
	lw s7, 48(s5)
	lw s6, 44(s5)
	lw v0, 52(s5)
	lw v1, 56(s5)
	lw a0, 60(s5)
	lw a1, 64(s5)
	lw a2, 68(s5)
	lw a3, 72(s5)
	lw t0, 76(s5)
	lw t1, 80(s5)
	lw t2, 84(s5)
	lw t3, 88(s5)
	lw t4, 92(s5)
	lw t5, 96(s5)
	lw t6, 100(s5)
	lw t7, 104(s5)
	lw t8, 108(s5)
	lw t9, 112(s5)
	lw s8, 116(s5)
	lw ra, 120(s5)

	/* Protect access to the k registers, and others. */
	di
	ehb

	/* Decrement the nesting count. */
	la k0, uxInterruptNesting
	lw k1, (k0)
	addiu k1, k1, -1
	sw k1, 0(k0)

	#if ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )
	/* If the nesting count is now zero then the FPU context may be restored. */
	bne k1, zero, 1f
	nop

	/* Restore the value of ulTaskHasFPUContext */
	la k0, ulTaskHasFPUContext
	lw k1, 0(s5)
	sw k1, 0(k0)

	/* If the task does not have an FPU context then adjust the stack normally. */
	beq k1, zero, 1f
	nop

	/* Restore the STATUS and EPC registers */
	lw k0, portSTATUS_STACK_LOCATION(s5)
	lw k1, portEPC_STACK_LOCATION(s5)

	/* Leave the stack in its original state. First load sp from s5, then
	restore s5 from the stack. */
	add sp, zero, s5
	lw s5, 40(sp)

	/* Adjust the stack pointer to remove the FPU context */
	addiu sp, sp, portFPU_CONTEXT_SIZE
	beq zero, zero, 2f
	nop

	1: /* Restore the STATUS and EPC registers */
	lw k0, portSTATUS_STACK_LOCATION(s5)
	lw k1, portEPC_STACK_LOCATION(s5)

	/* Leave the stack in its original state. First load sp from s5, then
	restore s5 from the stack. */
	add sp, zero, s5
	lw s5, 40(sp)

	2: /* Adjust the stack pointer */
	addiu sp, sp, portCONTEXT_SIZE

	#else

	/* Restore the frame when there is no hardware FP support. */
	lw k0, portSTATUS_STACK_LOCATION(s5)
	lw k1, portEPC_STACK_LOCATION(s5)

	/* Leave the stack in its original state. First load sp from s5, then
	restore s5 from the stack. */
	add sp, zero, s5
	lw s5, 40(sp)

	addiu sp, sp, portCONTEXT_SIZE

	#endif // ( __mips_hard_float == 1 ) && ( configUSE_TASK_FPU_SUPPORT == 1 )

	mtc0 k0, _CP0_STATUS
	mtc0 k1, _CP0_EPC
	ehb
	eret
	nop

	.endm