Release v1.2.7
diff --git a/Inc/Legacy/stm32_hal_legacy.h b/Inc/Legacy/stm32_hal_legacy.h
index 967547d..6ccac10 100644
--- a/Inc/Legacy/stm32_hal_legacy.h
+++ b/Inc/Legacy/stm32_hal_legacy.h
@@ -23,7 +23,7 @@
#define STM32_HAL_LEGACY
#ifdef __cplusplus
- extern "C" {
+extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
@@ -210,6 +210,15 @@
* @}
*/
+/** @defgroup CRC_Aliases CRC API aliases
+ * @{
+ */
+#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility */
+#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */
+/**
+ * @}
+ */
+
/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
* @{
*/
@@ -470,14 +479,14 @@
#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE
#endif
#if defined(STM32H7)
-#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1
-#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1
-#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1
-#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2
-#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2
-#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2
-#define FLASH_FLAG_WDW FLASH_FLAG_WBNE
-#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL
+#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1
+#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1
+#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1
+#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2
+#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2
+#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2
+#define FLASH_FLAG_WDW FLASH_FLAG_WBNE
+#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL
#endif /* STM32H7 */
/**
@@ -595,24 +604,24 @@
#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
-#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7)
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB)
#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
-#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB*/
#if defined(STM32L1)
- #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
- #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
- #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
- #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
#endif /* STM32L1 */
#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
- #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
- #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
- #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
#endif /* STM32F0 || STM32F3 || STM32F1 */
#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1
@@ -773,49 +782,6 @@
#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1)
#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0)
-/** @brief Constants defining the events that can be selected to configure the
- * set/reset crossbar of a timer output
- */
-#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1)
-#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2)
-#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3)
-#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4)
-#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5)
-#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6)
-#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7)
-#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8)
-#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9)
-
-#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1)
-#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2)
-#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3)
-#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4)
-#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5)
-#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6)
-#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7)
-#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8)
-#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9)
-
-/** @brief Constants defining the event filtering applied to external events
- * by a timer
- */
-#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-
/** @brief Constants defining the DLL calibration periods (in micro seconds)
*/
#define HRTIM_CALIBRATIONRATE_7300 0x00000000U
@@ -968,6 +934,11 @@
#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID
#endif
+#if defined(STM32L4) || defined(STM32L5)
+#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER
+#elif defined(STM32G4)
+#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED
+#endif
/**
* @}
@@ -979,15 +950,15 @@
#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
#if defined(STM32H7)
- #define I2S_IT_TXE I2S_IT_TXP
- #define I2S_IT_RXNE I2S_IT_RXP
+#define I2S_IT_TXE I2S_IT_TXP
+#define I2S_IT_RXNE I2S_IT_RXP
- #define I2S_FLAG_TXE I2S_FLAG_TXP
- #define I2S_FLAG_RXNE I2S_FLAG_RXP
+#define I2S_FLAG_TXE I2S_FLAG_TXP
+#define I2S_FLAG_RXNE I2S_FLAG_RXP
#endif
#if defined(STM32F7)
- #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
+#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
#endif
/**
* @}
@@ -1022,7 +993,7 @@
/**
* @}
*/
-
+
/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
* @{
*/
@@ -1122,16 +1093,16 @@
#if defined(STM32H7)
- #define SPI_FLAG_TXE SPI_FLAG_TXP
- #define SPI_FLAG_RXNE SPI_FLAG_RXP
+#define SPI_FLAG_TXE SPI_FLAG_TXP
+#define SPI_FLAG_RXNE SPI_FLAG_RXP
- #define SPI_IT_TXE SPI_IT_TXP
- #define SPI_IT_RXNE SPI_IT_RXP
+#define SPI_IT_TXE SPI_IT_TXP
+#define SPI_IT_RXNE SPI_IT_RXP
- #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET
- #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET
- #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET
- #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET
+#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET
+#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET
+#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET
+#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET
#endif /* STM32H7 */
@@ -1417,6 +1388,20 @@
*/
#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \
+ || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \
+ || defined(STM32H7)
+/** @defgroup DMA2D_Aliases DMA2D API Aliases
+ * @{
+ */
+#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort
+ for compatibility with legacy code */
+/**
+ * @}
+ */
+
+#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */
+
/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
* @{
*/
@@ -1435,6 +1420,16 @@
* @}
*/
+#if !defined(STM32F2)
+/** @defgroup HASH_alias HASH API alias
+ * @{
+ */
+#define HAL_HASHEx_IRQHandler HAL_HASH_IRQHandler /*!< Redirection for compatibility with legacy code */
+/**
+ *
+ * @}
+ */
+#endif /* STM32F2 */
/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
* @{
*/
@@ -1494,7 +1489,8 @@
#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
-#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\
+ )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
#if defined(STM32L0)
@@ -1502,7 +1498,8 @@
#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
#endif
#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
-#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\
+ )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ)
#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode
#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode
@@ -1525,9 +1522,9 @@
#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
- /**
+/**
* @}
- */
+ */
/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
* @{
@@ -1537,7 +1534,8 @@
#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter
#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter
-#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\
+ )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1)
#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT
@@ -1562,9 +1560,9 @@
#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA
#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA
#endif /* STM32F4 */
- /**
+/**
* @}
- */
+ */
/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
* @{
@@ -1619,9 +1617,9 @@
#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
- /**
+/**
* @}
- */
+ */
/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
* @{
@@ -1870,15 +1868,15 @@
#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
#if defined(STM32H7)
- #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
- #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
- #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
- #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
#else
- #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
- #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
- #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
- #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
#endif /* STM32H7 */
#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
@@ -2089,8 +2087,8 @@
*/
#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
- ((WAVE) == DAC_WAVE_NOISE)|| \
- ((WAVE) == DAC_WAVE_TRIANGLE))
+ ((WAVE) == DAC_WAVE_NOISE)|| \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
/**
* @}
@@ -2146,7 +2144,7 @@
#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
#if defined(STM32H7)
- #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG
+#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG
#endif
/**
@@ -2283,7 +2281,8 @@
#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
-#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\
+ )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
@@ -3251,7 +3250,7 @@
#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK
#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2
-#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5)
+#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL)
#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE
#else
#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
@@ -3363,7 +3362,6 @@
#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2
#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2
#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1
-
/**
* @}
*/
@@ -3380,7 +3378,7 @@
/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
* @{
*/
-#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4)
+#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL)
#else
#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
#endif
@@ -3400,19 +3398,19 @@
#else
#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
(((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
#endif /* STM32F1 */
#define IS_ALARM IS_RTC_ALARM
@@ -3596,6 +3594,13 @@
#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7)
+#define USART_OVERSAMPLING_16 0x00000000U
+#define USART_OVERSAMPLING_8 USART_CR1_OVER8
+
+#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \
+ ((__SAMPLING__) == USART_OVERSAMPLING_8))
+#endif /* STM32F0 || STM32F3 || STM32F7 */
/**
* @}
*/
diff --git a/Inc/stm32f2xx_hal_can.h b/Inc/stm32f2xx_hal_can.h
index 60d7176..1a6f452 100644
--- a/Inc/stm32f2xx_hal_can.h
+++ b/Inc/stm32f2xx_hal_can.h
@@ -255,7 +255,7 @@
HAL_CAN_RX_FIFO1_MSG_PENDING_CB_ID = 0x08U, /*!< CAN Rx FIFO 1 message pending callback ID */
HAL_CAN_RX_FIFO1_FULL_CB_ID = 0x09U, /*!< CAN Rx FIFO 1 full callback ID */
HAL_CAN_SLEEP_CB_ID = 0x0AU, /*!< CAN Sleep callback ID */
- HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID = 0x0BU, /*!< CAN Wake Up fropm Rx msg callback ID */
+ HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID = 0x0BU, /*!< CAN Wake Up from Rx msg callback ID */
HAL_CAN_ERROR_CB_ID = 0x0CU, /*!< CAN Error callback ID */
HAL_CAN_MSPINIT_CB_ID = 0x0DU, /*!< CAN MspInit callback ID */
@@ -295,11 +295,11 @@
#define HAL_CAN_ERROR_RX_FOV0 (0x00000200U) /*!< Rx FIFO0 overrun error */
#define HAL_CAN_ERROR_RX_FOV1 (0x00000400U) /*!< Rx FIFO1 overrun error */
#define HAL_CAN_ERROR_TX_ALST0 (0x00000800U) /*!< TxMailbox 0 transmit failure due to arbitration lost */
-#define HAL_CAN_ERROR_TX_TERR0 (0x00001000U) /*!< TxMailbox 1 transmit failure due to transmit error */
-#define HAL_CAN_ERROR_TX_ALST1 (0x00002000U) /*!< TxMailbox 0 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR0 (0x00001000U) /*!< TxMailbox 0 transmit failure due to transmit error */
+#define HAL_CAN_ERROR_TX_ALST1 (0x00002000U) /*!< TxMailbox 1 transmit failure due to arbitration lost */
#define HAL_CAN_ERROR_TX_TERR1 (0x00004000U) /*!< TxMailbox 1 transmit failure due to transmit error */
-#define HAL_CAN_ERROR_TX_ALST2 (0x00008000U) /*!< TxMailbox 0 transmit failure due to arbitration lost */
-#define HAL_CAN_ERROR_TX_TERR2 (0x00010000U) /*!< TxMailbox 1 transmit failure due to transmit error */
+#define HAL_CAN_ERROR_TX_ALST2 (0x00008000U) /*!< TxMailbox 2 transmit failure due to arbitration lost */
+#define HAL_CAN_ERROR_TX_TERR2 (0x00010000U) /*!< TxMailbox 2 transmit failure due to transmit error */
#define HAL_CAN_ERROR_TIMEOUT (0x00020000U) /*!< Timeout error */
#define HAL_CAN_ERROR_NOT_INITIALIZED (0x00040000U) /*!< Peripheral not initialized */
#define HAL_CAN_ERROR_NOT_READY (0x00080000U) /*!< Peripheral not ready */
diff --git a/Inc/stm32f2xx_hal_dac.h b/Inc/stm32f2xx_hal_dac.h
index 0d2f546..368d800 100644
--- a/Inc/stm32f2xx_hal_dac.h
+++ b/Inc/stm32f2xx_hal_dac.h
@@ -64,7 +64,7 @@
typedef struct __DAC_HandleTypeDef
#else
typedef struct
-#endif
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
{
DAC_TypeDef *Instance; /*!< Register base address */
@@ -83,18 +83,19 @@
void (* ConvHalfCpltCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
void (* ErrorCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
void (* DMAUnderrunCallbackCh1) (struct __DAC_HandleTypeDef *hdac);
+
void (* ConvCpltCallbackCh2) (struct __DAC_HandleTypeDef *hdac);
void (* ConvHalfCpltCallbackCh2) (struct __DAC_HandleTypeDef *hdac);
void (* ErrorCallbackCh2) (struct __DAC_HandleTypeDef *hdac);
void (* DMAUnderrunCallbackCh2) (struct __DAC_HandleTypeDef *hdac);
+
void (* MspInitCallback) (struct __DAC_HandleTypeDef *hdac);
- void (* MspDeInitCallback ) (struct __DAC_HandleTypeDef *hdac);
+ void (* MspDeInitCallback) (struct __DAC_HandleTypeDef *hdac);
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
} DAC_HandleTypeDef;
-
/**
* @brief DAC Configuration regular Channel structure definition
*/
@@ -118,10 +119,12 @@
HAL_DAC_CH1_HALF_COMPLETE_CB_ID = 0x01U, /*!< DAC CH1 half Complete Callback ID */
HAL_DAC_CH1_ERROR_ID = 0x02U, /*!< DAC CH1 error Callback ID */
HAL_DAC_CH1_UNDERRUN_CB_ID = 0x03U, /*!< DAC CH1 underrun Callback ID */
+
HAL_DAC_CH2_COMPLETE_CB_ID = 0x04U, /*!< DAC CH2 Complete Callback ID */
HAL_DAC_CH2_HALF_COMPLETE_CB_ID = 0x05U, /*!< DAC CH2 half Complete Callback ID */
HAL_DAC_CH2_ERROR_ID = 0x06U, /*!< DAC CH2 error Callback ID */
HAL_DAC_CH2_UNDERRUN_CB_ID = 0x07U, /*!< DAC CH2 underrun Callback ID */
+
HAL_DAC_MSPINIT_CB_ID = 0x08U, /*!< DAC MspInit Callback ID */
HAL_DAC_MSPDEINIT_CB_ID = 0x09U, /*!< DAC MspDeInit Callback ID */
HAL_DAC_ALL_CB_ID = 0x0AU /*!< DAC All ID */
@@ -162,13 +165,13 @@
/** @defgroup DAC_trigger_selection DAC trigger selection
* @{
*/
-#define DAC_TRIGGER_NONE 0x00000000U /*!< Conversion is automatic once the DAC1_DHRxxxx register has been loaded, and not by external trigger */
+#define DAC_TRIGGER_NONE 0x00000000UL /*!< Conversion is automatic once the DAC1_DHRxxxx register has been loaded, and not by external trigger */
#define DAC_TRIGGER_T2_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TEN1) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_T4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_T5_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_T6_TRGO ( DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */
#define DAC_TRIGGER_T7_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
-#define DAC_TRIGGER_T8_TRGO ( DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T8_TRGO ( DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_EXT_IT9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
#define DAC_TRIGGER_SOFTWARE (DAC_CR_TSEL1 | DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */
@@ -190,7 +193,9 @@
* @{
*/
#define DAC_CHANNEL_1 0x00000000U
+
#define DAC_CHANNEL_2 0x00000010U
+
/**
* @}
*/
@@ -210,8 +215,10 @@
* @{
*/
#define DAC_FLAG_DMAUDR1 (DAC_SR_DMAUDR1)
+
#define DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2)
+
/**
* @}
*/
@@ -220,8 +227,10 @@
* @{
*/
#define DAC_IT_DMAUDR1 (DAC_SR_DMAUDR1)
+
#define DAC_IT_DMAUDR2 (DAC_SR_DMAUDR2)
+
/**
* @}
*/
@@ -270,26 +279,28 @@
* @param __ALIGNMENT__ specifies the DAC alignment
* @retval None
*/
-#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008U + (__ALIGNMENT__))
+#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008UL + (__ALIGNMENT__))
+
/** @brief Set DHR12R2 alignment.
* @param __ALIGNMENT__ specifies the DAC alignment
* @retval None
*/
-#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (0x00000014U + (__ALIGNMENT__))
+#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (0x00000014UL + (__ALIGNMENT__))
+
/** @brief Set DHR12RD alignment.
* @param __ALIGNMENT__ specifies the DAC alignment
* @retval None
*/
-#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020U + (__ALIGNMENT__))
+#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020UL + (__ALIGNMENT__))
/** @brief Enable the DAC interrupt.
* @param __HANDLE__ specifies the DAC handle
* @param __INTERRUPT__ specifies the DAC interrupt.
* This parameter can be any combination of the following values:
- * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
- * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
+ * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
+ * @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
* @retval None
*/
#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
@@ -298,8 +309,8 @@
* @param __HANDLE__ specifies the DAC handle
* @param __INTERRUPT__ specifies the DAC interrupt.
* This parameter can be any combination of the following values:
- * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
- * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
+ * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
+ * @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
* @retval None
*/
#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
@@ -308,18 +319,19 @@
* @param __HANDLE__ DAC handle
* @param __INTERRUPT__ DAC interrupt source to check
* This parameter can be any combination of the following values:
- * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
- * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
+ * @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
+ * @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
* @retval State of interruption (SET or RESET)
*/
-#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR\
+ & (__INTERRUPT__)) == (__INTERRUPT__))
/** @brief Get the selected DAC's flag status.
* @param __HANDLE__ specifies the DAC handle.
* @param __FLAG__ specifies the DAC flag to get.
* This parameter can be any combination of the following values:
- * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag
- * @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag
+ * @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag
+ * @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag
* @retval None
*/
#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
@@ -328,8 +340,8 @@
* @param __HANDLE__ specifies the DAC handle.
* @param __FLAG__ specifies the DAC flag to clear.
* This parameter can be any combination of the following values:
- * @arg DAC_FLAG_DMAUDR1: DAC channel 1 DMA underrun flag
- * @arg DAC_FLAG_DMAUDR2: DAC channel 2 DMA underrun flag
+ * @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag
+ * @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag
* @retval None
*/
#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
@@ -353,7 +365,7 @@
((ALIGN) == DAC_ALIGN_12B_L) || \
((ALIGN) == DAC_ALIGN_8B_R))
-#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0U)
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0UL)
/**
* @}
@@ -390,9 +402,7 @@
HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length,
uint32_t Alignment);
HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel);
-
void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac);
-
HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac);
@@ -416,7 +426,6 @@
*/
/* Peripheral Control functions ***********************************************/
uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel);
-
HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel);
/**
* @}
@@ -462,7 +471,6 @@
#endif
-#endif /*STM32F2xx_HAL_DAC_H */
+#endif /* STM32F2xx_HAL_DAC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Inc/stm32f2xx_hal_dac_ex.h b/Inc/stm32f2xx_hal_dac_ex.h
index 08c2adc..6a76032 100644
--- a/Inc/stm32f2xx_hal_dac_ex.h
+++ b/Inc/stm32f2xx_hal_dac_ex.h
@@ -53,7 +53,7 @@
/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangle amplitude
* @{
*/
-#define DAC_LFSRUNMASK_BIT0 0x00000000U /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BIT0 0x00000000UL /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
#define DAC_LFSRUNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
@@ -65,7 +65,7 @@
#define DAC_LFSRUNMASK_BITS9_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS10_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 ) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
#define DAC_LFSRUNMASK_BITS11_0 (DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
-#define DAC_TRIANGLEAMPLITUDE_1 0x00000000U /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_1 0x00000000UL /*!< Select max triangle amplitude of 1 */
#define DAC_TRIANGLEAMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
#define DAC_TRIANGLEAMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Select max triangle amplitude of 7 */
#define DAC_TRIANGLEAMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
@@ -104,7 +104,6 @@
((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
((TRIGGER) == DAC_TRIGGER_SOFTWARE))
-
#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
@@ -148,6 +147,8 @@
HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude);
HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_DualStart(DAC_HandleTypeDef *hdac);
+HAL_StatusTypeDef HAL_DACEx_DualStop(DAC_HandleTypeDef *hdac);
HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac);
@@ -165,6 +166,10 @@
* @}
*/
+/**
+ * @}
+ */
+
/** @addtogroup DACEx_Private_Functions
* @{
*/
@@ -183,10 +188,6 @@
* @}
*/
-/**
- * @}
- */
-
#endif /* DAC */
/**
@@ -197,6 +198,6 @@
}
#endif
-#endif /*STM32F2xx_HAL_DAC_EX_H */
+#endif /* STM32F2xx_HAL_DAC_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Inc/stm32f2xx_hal_eth.h b/Inc/stm32f2xx_hal_eth.h
index 4c2932f..cef213e 100644
--- a/Inc/stm32f2xx_hal_eth.h
+++ b/Inc/stm32f2xx_hal_eth.h
@@ -591,7 +591,7 @@
/**
- * @brief Received Frame Informations structure definition
+ * @brief Received Frame Information structure definition
*/
typedef struct
{
diff --git a/Inc/stm32f2xx_hal_exti.h b/Inc/stm32f2xx_hal_exti.h
index 0c80897..6b62747 100644
--- a/Inc/stm32f2xx_hal_exti.h
+++ b/Inc/stm32f2xx_hal_exti.h
@@ -207,19 +207,19 @@
/** @defgroup EXTI_Private_Macros EXTI Private Macros
* @{
*/
-#define IS_EXTI_LINE(__LINE__) ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
- ((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
- (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
- (((__LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
+#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
+ ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
+ (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
+ (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
-#define IS_EXTI_MODE(__LINE__) ((((__LINE__) & EXTI_MODE_MASK) != 0x00u) && \
- (((__LINE__) & ~EXTI_MODE_MASK) == 0x00u))
+#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
+ (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
-#define IS_EXTI_TRIGGER(__LINE__) (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
+#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
-#define IS_EXTI_PENDING_EDGE(__LINE__) ((__LINE__) == EXTI_TRIGGER_RISING_FALLING)
+#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)
-#define IS_EXTI_CONFIG_LINE(__LINE__) (((__LINE__) & EXTI_CONFIG) != 0x00u)
+#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
((__PORT__) == EXTI_GPIOB) || \
diff --git a/Inc/stm32f2xx_hal_gpio.h b/Inc/stm32f2xx_hal_gpio.h
index ec3234d..1623fbc 100644
--- a/Inc/stm32f2xx_hal_gpio.h
+++ b/Inc/stm32f2xx_hal_gpio.h
@@ -108,29 +108,28 @@
/** @defgroup GPIO_mode_define GPIO mode define
* @brief GPIO Configuration Mode
- * Elements values convention: 0xX0yz00YZ
- * - X : GPIO mode or EXTI Mode
- * - y : External IT or Event trigger detection
- * - z : IO configuration on External IT or Event
- * - Y : Output type (Push Pull or Open Drain)
- * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * Elements values convention: 0x00WX00YZ
+ * - W : EXTI trigger detection on 3 bits
+ * - X : EXTI mode (IT or Event) on 2 bits
+ * - Y : Output type (Push Pull or Open Drain) on 1 bit
+ * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits
* @{
*/
-#define GPIO_MODE_INPUT 0x00000000U /*!< Input Floating Mode */
-#define GPIO_MODE_OUTPUT_PP 0x00000001U /*!< Output Push Pull Mode */
-#define GPIO_MODE_OUTPUT_OD 0x00000011U /*!< Output Open Drain Mode */
-#define GPIO_MODE_AF_PP 0x00000002U /*!< Alternate Function Push Pull Mode */
-#define GPIO_MODE_AF_OD 0x00000012U /*!< Alternate Function Open Drain Mode */
+#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */
-#define GPIO_MODE_ANALOG 0x00000003U /*!< Analog Mode */
+#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */
-#define GPIO_MODE_IT_RISING 0x10110000U /*!< External Interrupt Mode with Rising edge trigger detection */
-#define GPIO_MODE_IT_FALLING 0x10210000U /*!< External Interrupt Mode with Falling edge trigger detection */
-#define GPIO_MODE_IT_RISING_FALLING 0x10310000U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-#define GPIO_MODE_EVT_RISING 0x10120000U /*!< External Event Mode with Rising edge trigger detection */
-#define GPIO_MODE_EVT_FALLING 0x10220000U /*!< External Event Mode with Falling edge trigger detection */
-#define GPIO_MODE_EVT_RISING_FALLING 0x10320000U /*!< External Event Mode with Rising/Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
@@ -252,7 +251,24 @@
/** @defgroup GPIO_Private_Constants GPIO Private Constants
* @{
*/
-
+#define GPIO_MODE_Pos 0U
+#define GPIO_MODE (0x3UL << GPIO_MODE_Pos)
+#define MODE_INPUT (0x0UL << GPIO_MODE_Pos)
+#define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos)
+#define MODE_AF (0x2UL << GPIO_MODE_Pos)
+#define MODE_ANALOG (0x3UL << GPIO_MODE_Pos)
+#define OUTPUT_TYPE_Pos 4U
+#define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos)
+#define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos)
+#define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos)
+#define EXTI_MODE_Pos 16U
+#define EXTI_MODE (0x3UL << EXTI_MODE_Pos)
+#define EXTI_IT (0x1UL << EXTI_MODE_Pos)
+#define EXTI_EVT (0x2UL << EXTI_MODE_Pos)
+#define TRIGGER_MODE_Pos 20U
+#define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos)
+#define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos)
+#define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos)
/**
* @}
*/
diff --git a/Inc/stm32f2xx_hal_hcd.h b/Inc/stm32f2xx_hal_hcd.h
index b9eb58f..99f542c 100644
--- a/Inc/stm32f2xx_hal_hcd.h
+++ b/Inc/stm32f2xx_hal_hcd.h
@@ -111,7 +111,16 @@
#define HCD_SPEED_HIGH USBH_HS_SPEED
#define HCD_SPEED_FULL USBH_FSLS_SPEED
#define HCD_SPEED_LOW USBH_FSLS_SPEED
+/**
+ * @}
+ */
+/** @defgroup HCD_Device_Speed HCD Device Speed
+ * @{
+ */
+#define HCD_DEVICE_SPEED_HIGH 0U
+#define HCD_DEVICE_SPEED_FULL 1U
+#define HCD_DEVICE_SPEED_LOW 2U
/**
* @}
*/
@@ -149,7 +158,8 @@
#define __HAL_HCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
#define __HAL_HCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance)\
+ & (__INTERRUPT__)) == (__INTERRUPT__))
#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
@@ -292,10 +302,10 @@
*/
/* Private functions prototypes ----------------------------------------------*/
- /**
+/**
* @}
*/
- /**
+/**
* @}
*/
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
diff --git a/Inc/stm32f2xx_hal_i2c.h b/Inc/stm32f2xx_hal_i2c.h
index 642db4c..e8b0a07 100644
--- a/Inc/stm32f2xx_hal_i2c.h
+++ b/Inc/stm32f2xx_hal_i2c.h
@@ -85,7 +85,7 @@
* 01 : Abort (Abort user request on going)
* 10 : Timeout
* 11 : Error
- * b5 Peripheral initilisation status
+ * b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
* 1 : Init done (Peripheral initialized and ready to use. HAL I2C Init function called)
* b4 (not used)
diff --git a/Inc/stm32f2xx_hal_irda.h b/Inc/stm32f2xx_hal_irda.h
index 4529d24..75b0db4 100644
--- a/Inc/stm32f2xx_hal_irda.h
+++ b/Inc/stm32f2xx_hal_irda.h
@@ -83,9 +83,9 @@
* 01 : (Not Used)
* 10 : Timeout
* 11 : Error
- * b5 IP initilisation status
+ * b5 IP initialisation status
* 0 : Reset (IP not initialized)
- * 1 : Init done (IP not initialized. HAL IRDA Init function already called)
+ * 1 : Init done (IP initialized. HAL IRDA Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
@@ -100,9 +100,9 @@
* RxState value coding follow below described bitmap :
* b7-b6 (not used)
* xx : Should be set to 00
- * b5 IP initilisation status
+ * b5 IP initialisation status
* 0 : Reset (IP not initialized)
- * 1 : Init done (IP not initialized)
+ * 1 : Init done (IP initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
diff --git a/Inc/stm32f2xx_hal_iwdg.h b/Inc/stm32f2xx_hal_iwdg.h
index cf680d4..c1ccaf1 100644
--- a/Inc/stm32f2xx_hal_iwdg.h
+++ b/Inc/stm32f2xx_hal_iwdg.h
@@ -77,20 +77,17 @@
/** @defgroup IWDG_Prescaler IWDG Prescaler
* @{
*/
-#define IWDG_PRESCALER_4 0x00000000U /*!< IWDG prescaler set to 4 */
+#define IWDG_PRESCALER_4 0x00000000u /*!< IWDG prescaler set to 4 */
#define IWDG_PRESCALER_8 IWDG_PR_PR_0 /*!< IWDG prescaler set to 8 */
#define IWDG_PRESCALER_16 IWDG_PR_PR_1 /*!< IWDG prescaler set to 16 */
#define IWDG_PRESCALER_32 (IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */
#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */
#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */
#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */
-
/**
* @}
*/
-
-
/**
* @}
*/
@@ -128,7 +125,7 @@
* @{
*/
/* Initialization/Start functions ********************************************/
-HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
/**
* @}
*/
@@ -137,7 +134,7 @@
* @{
*/
/* I/O operation functions ****************************************************/
-HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
/**
* @}
*/
@@ -154,10 +151,10 @@
/**
* @brief IWDG Key Register BitMask
*/
-#define IWDG_KEY_RELOAD 0x0000AAAAU /*!< IWDG Reload Counter Enable */
-#define IWDG_KEY_ENABLE 0x0000CCCCU /*!< IWDG Peripheral Enable */
-#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555U /*!< IWDG KR Write Access Enable */
-#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000U /*!< IWDG KR Write Access Disable */
+#define IWDG_KEY_RELOAD 0x0000AAAAu /*!< IWDG Reload Counter Enable */
+#define IWDG_KEY_ENABLE 0x0000CCCCu /*!< IWDG Peripheral Enable */
+#define IWDG_KEY_WRITE_ACCESS_ENABLE 0x00005555u /*!< IWDG KR Write Access Enable */
+#define IWDG_KEY_WRITE_ACCESS_DISABLE 0x00000000u /*!< IWDG KR Write Access Disable */
/**
* @}
@@ -202,6 +199,8 @@
*/
#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= IWDG_RLR_RL)
+
+
/**
* @}
*/
diff --git a/Inc/stm32f2xx_hal_mmc.h b/Inc/stm32f2xx_hal_mmc.h
index 0bebfb3..111bc18 100644
--- a/Inc/stm32f2xx_hal_mmc.h
+++ b/Inc/stm32f2xx_hal_mmc.h
@@ -48,14 +48,14 @@
*/
typedef enum
{
- HAL_MMC_STATE_RESET = ((uint32_t)0x00000000U), /*!< MMC not yet initialized or disabled */
- HAL_MMC_STATE_READY = ((uint32_t)0x00000001U), /*!< MMC initialized and ready for use */
- HAL_MMC_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< MMC Timeout state */
- HAL_MMC_STATE_BUSY = ((uint32_t)0x00000003U), /*!< MMC process ongoing */
- HAL_MMC_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< MMC Programming State */
- HAL_MMC_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< MMC Receinving State */
- HAL_MMC_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< MMC Transfert State */
- HAL_MMC_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< MMC is in error state */
+ HAL_MMC_STATE_RESET = 0x00000000U, /*!< MMC not yet initialized or disabled */
+ HAL_MMC_STATE_READY = 0x00000001U, /*!< MMC initialized and ready for use */
+ HAL_MMC_STATE_TIMEOUT = 0x00000002U, /*!< MMC Timeout state */
+ HAL_MMC_STATE_BUSY = 0x00000003U, /*!< MMC process ongoing */
+ HAL_MMC_STATE_PROGRAMMING = 0x00000004U, /*!< MMC Programming State */
+ HAL_MMC_STATE_RECEIVING = 0x00000005U, /*!< MMC Receinving State */
+ HAL_MMC_STATE_TRANSFER = 0x00000006U, /*!< MMC Transfer State */
+ HAL_MMC_STATE_ERROR = 0x0000000FU /*!< MMC is in error state */
}HAL_MMC_StateTypeDef;
/**
* @}
@@ -264,7 +264,7 @@
* @{
*/
-#define MMC_BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */
+#define MMC_BLOCKSIZE 512U /*!< Block size is 512 bytes */
/** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition
* @{
@@ -316,13 +316,13 @@
/** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration
* @{
*/
-#define MMC_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */
-#define MMC_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */
-#define MMC_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */
-#define MMC_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */
-#define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */
-#define MMC_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */
-#define MMC_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */
+#define MMC_CONTEXT_NONE 0x00000000U /*!< None */
+#define MMC_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */
+#define MMC_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */
+#define MMC_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */
+#define MMC_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */
+#define MMC_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */
+#define MMC_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */
/**
* @}
@@ -346,8 +346,8 @@
/** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards
* @{
*/
-#define MMC_LOW_CAPACITY_CARD ((uint32_t)0x00000000U) /*!< MMC Card Capacity <=2Gbytes */
-#define MMC_HIGH_CAPACITY_CARD ((uint32_t)0x00000001U) /*!< MMC Card Capacity >2Gbytes and <2Tbytes */
+#define MMC_LOW_CAPACITY_CARD 0x00000000U /*!< MMC Card Capacity <=2Gbytes */
+#define MMC_HIGH_CAPACITY_CARD 0x00000001U /*!< MMC Card Capacity >2Gbytes and <2Tbytes */
/**
* @}
diff --git a/Inc/stm32f2xx_hal_nand.h b/Inc/stm32f2xx_hal_nand.h
index 9f08ea2..14a468d 100644
--- a/Inc/stm32f2xx_hal_nand.h
+++ b/Inc/stm32f2xx_hal_nand.h
@@ -133,7 +133,7 @@
void (* MspInitCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND Msp Init callback */
void (* MspDeInitCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND Msp DeInit callback */
void (* ItCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND IT callback */
-#endif
+#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
} NAND_HandleTypeDef;
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
@@ -151,7 +151,7 @@
* @brief HAL NAND Callback pointer definition
*/
typedef void (*pNAND_CallbackTypeDef)(NAND_HandleTypeDef *hnand);
-#endif
+#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
/**
* @}
@@ -175,7 +175,7 @@
} while(0)
#else
#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
-#endif
+#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
/**
* @}
@@ -242,7 +242,7 @@
HAL_StatusTypeDef HAL_NAND_RegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId,
pNAND_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_NAND_UnRegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId);
-#endif
+#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
/**
* @}
@@ -325,7 +325,10 @@
* @retval NAND Raw address value
*/
#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
- (((__ADDRESS__)->Block + (((__ADDRESS__)->Plane) * ((__HANDLE__)->Config.PlaneSize)))* ((__HANDLE__)->Config.BlockSize)))
+ (((__ADDRESS__)->Block + \
+ (((__ADDRESS__)->Plane) * \
+ ((__HANDLE__)->Config.PlaneSize))) * \
+ ((__HANDLE__)->Config.BlockSize)))
/**
* @brief NAND memory Column address computation.
diff --git a/Inc/stm32f2xx_hal_nor.h b/Inc/stm32f2xx_hal_nor.h
index 55fdaa8..e52c8c1 100644
--- a/Inc/stm32f2xx_hal_nor.h
+++ b/Inc/stm32f2xx_hal_nor.h
@@ -125,7 +125,7 @@
#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
void (* MspInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp Init callback */
void (* MspDeInitCallback)(struct __NOR_HandleTypeDef *hnor); /*!< NOR Msp DeInit callback */
-#endif
+#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
} NOR_HandleTypeDef;
#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
@@ -142,7 +142,7 @@
* @brief HAL NOR Callback pointer definition
*/
typedef void (*pNOR_CallbackTypeDef)(NOR_HandleTypeDef *hnor);
-#endif
+#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
/**
* @}
*/
@@ -164,7 +164,7 @@
} while(0)
#else
#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
-#endif
+#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
/**
* @}
*/
@@ -213,7 +213,7 @@
HAL_StatusTypeDef HAL_NOR_RegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId,
pNOR_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_NOR_UnRegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId);
-#endif
+#endif /* USE_HAL_NOR_REGISTER_CALLBACKS */
/**
* @}
*/
@@ -257,17 +257,17 @@
#define DEVICE_CODE3_ADDR ((uint16_t)0x000F)
/* NOR CFI IDs addresses */
-#define CFI1_ADDRESS ((uint16_t)0x61)
-#define CFI2_ADDRESS ((uint16_t)0x62)
-#define CFI3_ADDRESS ((uint16_t)0x63)
-#define CFI4_ADDRESS ((uint16_t)0x64)
+#define CFI1_ADDRESS ((uint16_t)0x0061)
+#define CFI2_ADDRESS ((uint16_t)0x0062)
+#define CFI3_ADDRESS ((uint16_t)0x0063)
+#define CFI4_ADDRESS ((uint16_t)0x0064)
/* NOR operation wait timeout */
#define NOR_TMEOUT ((uint16_t)0xFFFF)
/* NOR memory data width */
-#define NOR_MEMORY_8B ((uint8_t)0x0)
-#define NOR_MEMORY_16B ((uint8_t)0x1)
+#define NOR_MEMORY_8B ((uint8_t)0x00)
+#define NOR_MEMORY_16B ((uint8_t)0x01)
/* NOR memory device read/write start address */
#define NOR_MEMORY_ADRESS1 (0x60000000U)
diff --git a/Inc/stm32f2xx_hal_pcd.h b/Inc/stm32f2xx_hal_pcd.h
index 8c4fd88..5fd7ce1 100644
--- a/Inc/stm32f2xx_hal_pcd.h
+++ b/Inc/stm32f2xx_hal_pcd.h
@@ -186,16 +186,20 @@
#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) \
+ ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+
#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__))
#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) \
+ *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK)
-#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= ~(USB_OTG_PCGCCTL_STOPCLK)
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) \
+ *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
-#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
-
-#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U)
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) \
+ ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U)
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
@@ -399,27 +403,27 @@
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
#ifndef USB_OTG_DOEPINT_OTEPSPR
#define USB_OTG_DOEPINT_OTEPSPR (0x1UL << 5) /*!< Status Phase Received interrupt */
-#endif
+#endif /* defined USB_OTG_DOEPINT_OTEPSPR */
#ifndef USB_OTG_DOEPMSK_OTEPSPRM
#define USB_OTG_DOEPMSK_OTEPSPRM (0x1UL << 5) /*!< Setup Packet Received interrupt mask */
-#endif
+#endif /* defined USB_OTG_DOEPMSK_OTEPSPRM */
#ifndef USB_OTG_DOEPINT_NAK
#define USB_OTG_DOEPINT_NAK (0x1UL << 13) /*!< NAK interrupt */
-#endif
+#endif /* defined USB_OTG_DOEPINT_NAK */
#ifndef USB_OTG_DOEPMSK_NAKM
#define USB_OTG_DOEPMSK_NAKM (0x1UL << 13) /*!< OUT Packet NAK interrupt mask */
-#endif
+#endif /* defined USB_OTG_DOEPMSK_NAKM */
#ifndef USB_OTG_DOEPINT_STPKTRX
#define USB_OTG_DOEPINT_STPKTRX (0x1UL << 15) /*!< Setup Packet Received interrupt */
-#endif
+#endif /* defined USB_OTG_DOEPINT_STPKTRX */
#ifndef USB_OTG_DOEPMSK_NYETM
#define USB_OTG_DOEPMSK_NYETM (0x1UL << 14) /*!< Setup Packet Received interrupt mask */
-#endif
+#endif /* defined USB_OTG_DOEPMSK_NYETM */
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
/* Private macros ------------------------------------------------------------*/
diff --git a/Inc/stm32f2xx_hal_rng.h b/Inc/stm32f2xx_hal_rng.h
index a8811e9..5b0e480 100644
--- a/Inc/stm32f2xx_hal_rng.h
+++ b/Inc/stm32f2xx_hal_rng.h
@@ -22,7 +22,7 @@
#define STM32F2xx_HAL_RNG_H
#ifdef __cplusplus
- extern "C" {
+extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
@@ -77,7 +77,7 @@
typedef struct __RNG_HandleTypeDef
#else
typedef struct
-#endif /* (USE_HAL_RNG_REGISTER_CALLBACKS) */
+#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
{
RNG_TypeDef *Instance; /*!< Register base address */
@@ -85,7 +85,7 @@
__IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */
- __IO uint32_t ErrorCode; /*!< RNG Error code */
+ __IO uint32_t ErrorCode; /*!< RNG Error code */
uint32_t RandomNumber; /*!< Last Generated RNG Data */
@@ -156,14 +156,14 @@
/** @defgroup RNG_Error_Definition RNG Error Definition
* @{
*/
-#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */
+#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
#define HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U /*!< Invalid Callback error */
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
-#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */
+#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */
#define HAL_RNG_ERROR_BUSY 0x00000004U /*!< Busy error */
#define HAL_RNG_ERROR_SEED 0x00000008U /*!< Seed error */
-#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */
+#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */
/**
* @}
*/
@@ -189,7 +189,7 @@
} while(0U)
#else
#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
-#endif /*USE_HAL_RNG_REGISTER_CALLBACKS */
+#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
/**
* @brief Enables the RNG peripheral.
@@ -284,7 +284,8 @@
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, pRNG_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID,
+ pRNG_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID);
HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback);
@@ -298,8 +299,10 @@
/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions
* @{
*/
-uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead */
-uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef
+ *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef
+ *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */
HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit);
HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng);
uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng);
@@ -333,8 +336,8 @@
((IT) == RNG_IT_SEI))
#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
- ((FLAG) == RNG_FLAG_CECS) || \
- ((FLAG) == RNG_FLAG_SECS))
+ ((FLAG) == RNG_FLAG_CECS) || \
+ ((FLAG) == RNG_FLAG_SECS))
/**
* @}
diff --git a/Inc/stm32f2xx_hal_rtc.h b/Inc/stm32f2xx_hal_rtc.h
index fad5b14..06f790a 100644
--- a/Inc/stm32f2xx_hal_rtc.h
+++ b/Inc/stm32f2xx_hal_rtc.h
@@ -96,12 +96,10 @@
uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
This parameter can be a value of @ref RTC_AM_PM_Definitions */
- uint32_t DayLightSaving; /*!< Specifies DayLight Save Operation.
- This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+ uint32_t DayLightSaving; /*!< This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
- uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
- in CR register to store the operation.
- This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+ uint32_t StoreOperation; /*!< This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
+
} RTC_TimeTypeDef;
/**
@@ -642,6 +640,13 @@
HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+
+/* RTC Daylight Saving Time functions *****************************************/
+void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
diff --git a/Inc/stm32f2xx_hal_sd.h b/Inc/stm32f2xx_hal_sd.h
index a4317e4..b1b3cf9 100644
--- a/Inc/stm32f2xx_hal_sd.h
+++ b/Inc/stm32f2xx_hal_sd.h
@@ -49,14 +49,14 @@
*/
typedef enum
{
- HAL_SD_STATE_RESET = ((uint32_t)0x00000000U), /*!< SD not yet initialized or disabled */
- HAL_SD_STATE_READY = ((uint32_t)0x00000001U), /*!< SD initialized and ready for use */
- HAL_SD_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< SD Timeout state */
- HAL_SD_STATE_BUSY = ((uint32_t)0x00000003U), /*!< SD process ongoing */
- HAL_SD_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< SD Programming State */
- HAL_SD_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< SD Receiving State */
- HAL_SD_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< SD Transfert State */
- HAL_SD_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< SD is in error state */
+ HAL_SD_STATE_RESET = 0x00000000U, /*!< SD not yet initialized or disabled */
+ HAL_SD_STATE_READY = 0x00000001U, /*!< SD initialized and ready for use */
+ HAL_SD_STATE_TIMEOUT = 0x00000002U, /*!< SD Timeout state */
+ HAL_SD_STATE_BUSY = 0x00000003U, /*!< SD process ongoing */
+ HAL_SD_STATE_PROGRAMMING = 0x00000004U, /*!< SD Programming State */
+ HAL_SD_STATE_RECEIVING = 0x00000005U, /*!< SD Receiving State */
+ HAL_SD_STATE_TRANSFER = 0x00000006U, /*!< SD Transfer State */
+ HAL_SD_STATE_ERROR = 0x0000000FU /*!< SD is in error state */
}HAL_SD_StateTypeDef;
/**
* @}
@@ -287,7 +287,7 @@
* @{
*/
-#define BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */
+#define BLOCKSIZE 512U /*!< Block size is 512 bytes */
/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition
* @{
@@ -339,13 +339,13 @@
/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration
* @{
*/
-#define SD_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */
-#define SD_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */
-#define SD_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */
-#define SD_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */
-#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */
-#define SD_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */
-#define SD_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */
+#define SD_CONTEXT_NONE 0x00000000U /*!< None */
+#define SD_CONTEXT_READ_SINGLE_BLOCK 0x00000001U /*!< Read single block operation */
+#define SD_CONTEXT_READ_MULTIPLE_BLOCK 0x00000002U /*!< Read multiple blocks operation */
+#define SD_CONTEXT_WRITE_SINGLE_BLOCK 0x00000010U /*!< Write single block operation */
+#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK 0x00000020U /*!< Write multiple blocks operation */
+#define SD_CONTEXT_IT 0x00000008U /*!< Process in Interrupt mode */
+#define SD_CONTEXT_DMA 0x00000080U /*!< Process in DMA mode */
/**
* @}
@@ -354,9 +354,9 @@
/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards
* @{
*/
-#define CARD_SDSC ((uint32_t)0x00000000U) /*!< SD Standard Capacity <2Go */
-#define CARD_SDHC_SDXC ((uint32_t)0x00000001U) /*!< SD High Capacity <32Go, SD Extended Capacity <2To */
-#define CARD_SECURED ((uint32_t)0x00000003U)
+#define CARD_SDSC 0x00000000U /*!< SD Standard Capacity <2Go */
+#define CARD_SDHC_SDXC 0x00000001U /*!< SD High Capacity <32Go, SD Extended Capacity <2To */
+#define CARD_SECURED 0x00000003U
/**
* @}
@@ -365,8 +365,8 @@
/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version
* @{
*/
-#define CARD_V1_X ((uint32_t)0x00000000U)
-#define CARD_V2_X ((uint32_t)0x00000001U)
+#define CARD_V1_X 0x00000000U
+#define CARD_V2_X 0x00000001U
/**
* @}
*/
@@ -638,7 +638,6 @@
* @{
*/
HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode);
-HAL_StatusTypeDef HAL_SD_ConfigSpeedBusOperation(SD_HandleTypeDef *hsd, uint32_t SpeedMode);
/**
* @}
*/
diff --git a/Inc/stm32f2xx_hal_smartcard.h b/Inc/stm32f2xx_hal_smartcard.h
index 25cd0ab..8f79f72 100644
--- a/Inc/stm32f2xx_hal_smartcard.h
+++ b/Inc/stm32f2xx_hal_smartcard.h
@@ -99,9 +99,9 @@
* 01 : (Not Used)
* 10 : Timeout
* 11 : Error
- * b5 IP initilisation status
+ * b5 IP initialization status
* 0 : Reset (IP not initialized)
- * 1 : Init done (IP not initialized. HAL SMARTCARD Init function already called)
+ * 1 : Init done (IP initialized. HAL SMARTCARD Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
@@ -116,9 +116,9 @@
* RxState value coding follow below described bitmap :
* b7-b6 (not used)
* xx : Should be set to 00
- * b5 IP initilisation status
+ * b5 IP initialization status
* 0 : Reset (IP not initialized)
- * 1 : Init done (IP not initialized)
+ * 1 : Init done (IP initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
diff --git a/Inc/stm32f2xx_hal_sram.h b/Inc/stm32f2xx_hal_sram.h
index 926942c..f95c53d 100644
--- a/Inc/stm32f2xx_hal_sram.h
+++ b/Inc/stm32f2xx_hal_sram.h
@@ -80,7 +80,7 @@
void (* MspDeInitCallback)(struct __SRAM_HandleTypeDef *hsram); /*!< SRAM Msp DeInit callback */
void (* DmaXferCpltCallback)(DMA_HandleTypeDef *hdma); /*!< SRAM DMA Xfer Complete callback */
void (* DmaXferErrorCallback)(DMA_HandleTypeDef *hdma); /*!< SRAM DMA Xfer Error callback */
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
} SRAM_HandleTypeDef;
#if (USE_HAL_SRAM_REGISTER_CALLBACKS == 1)
@@ -100,7 +100,7 @@
*/
typedef void (*pSRAM_CallbackTypeDef)(SRAM_HandleTypeDef *hsram);
typedef void (*pSRAM_DmaCallbackTypeDef)(DMA_HandleTypeDef *hdma);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
/**
* @}
*/
@@ -124,7 +124,7 @@
} while(0)
#else
#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
/**
* @}
@@ -182,7 +182,7 @@
HAL_StatusTypeDef HAL_SRAM_UnRegisterCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId);
HAL_StatusTypeDef HAL_SRAM_RegisterDmaCallback(SRAM_HandleTypeDef *hsram, HAL_SRAM_CallbackIDTypeDef CallbackId,
pSRAM_DmaCallbackTypeDef pCallback);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
/**
* @}
diff --git a/Inc/stm32f2xx_hal_tim.h b/Inc/stm32f2xx_hal_tim.h
index 19cdd87..a6db747 100644
--- a/Inc/stm32f2xx_hal_tim.h
+++ b/Inc/stm32f2xx_hal_tim.h
@@ -65,8 +65,10 @@
This means in PWM mode that (N+1) corresponds to:
- the number of PWM periods in edge-aligned mode
- the number of half PWM period in center-aligned mode
- GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
- Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+ GP timers: this parameter must be a number between Min_Data = 0x00 and
+ Max_Data = 0xFF.
+ Advanced timers: this parameter must be a number between Min_Data = 0x0000 and
+ Max_Data = 0xFFFF. */
uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload.
This parameter can be a value of @ref TIM_AutoReloadPreload */
@@ -218,7 +220,8 @@
uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
This parameter can be a value of @ref TIM_ClearInput_Polarity */
uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
- This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */
+ This parameter must be 0: When OCRef clear feature is used with ETR source,
+ ETR prescaler must be off */
uint32_t ClearInputFilter; /*!< TIM Clear Input filter
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
} TIM_ClearInputConfigTypeDef;
@@ -264,22 +267,22 @@
*/
typedef struct
{
- uint32_t OffStateRunMode; /*!< TIM off state in run mode
- This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
- uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
- This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
- uint32_t LockLevel; /*!< TIM Lock level
- This parameter can be a value of @ref TIM_Lock_level */
- uint32_t DeadTime; /*!< TIM dead Time
- This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
- uint32_t BreakState; /*!< TIM Break State
- This parameter can be a value of @ref TIM_Break_Input_enable_disable */
- uint32_t BreakPolarity; /*!< TIM Break input polarity
- This parameter can be a value of @ref TIM_Break_Polarity */
- uint32_t BreakFilter; /*!< Specifies the break input filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
- uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
- This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+
+ uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */
+
+ uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+
+ uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+
+ uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */
+
+ uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+
} TIM_BreakDeadTimeConfigTypeDef;
/**
@@ -628,10 +631,8 @@
/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
* @{
*/
-#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be
- connected to IC1, IC2, IC3 or IC4, respectively */
-#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be
- connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */
#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
/**
* @}
@@ -846,8 +847,7 @@
* @{
*/
#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */
-#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event
- (if none of the break inputs BRK and BRK2 is active) */
+#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */
/**
* @}
*/
@@ -954,24 +954,24 @@
/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
* @{
*/
-#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
/**
* @}
*/
@@ -1091,7 +1091,8 @@
* @brief Disable the TIM main Output.
* @param __HANDLE__ TIM handle
* @retval None
- * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
+ * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been
+ * disabled
*/
#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
do { \
@@ -1252,8 +1253,8 @@
* @brief Indicates whether or not the TIM Counter is used as downcounter.
* @param __HANDLE__ TIM handle.
* @retval False (Counter used as upcounter) or True (Counter used as downcounter)
- * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder
-mode.
+ * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode
+ * or Encoder mode.
*/
#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
@@ -1327,7 +1328,8 @@
#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
/**
- * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function.
+ * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel()
+ * function.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channels to be configured.
* This parameter can be one of the following values:
@@ -1836,10 +1838,14 @@
((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__)))
#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \
- (__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__); \
- (__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__); \
- (__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__); \
- (__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelNState[0] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelNState[1] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelNState[2] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelNState[3] = \
+ (__CHANNEL_STATE__); \
} while(0)
/**
@@ -2014,14 +2020,14 @@
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
- uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength,
- uint32_t DataLength);
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer,
+ uint32_t BurstLength, uint32_t DataLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
- uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength,
- uint32_t DataLength);
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer,
+ uint32_t BurstLength, uint32_t DataLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
diff --git a/Inc/stm32f2xx_hal_uart.h b/Inc/stm32f2xx_hal_uart.h
index 306dacc..aa37d9d 100644
--- a/Inc/stm32f2xx_hal_uart.h
+++ b/Inc/stm32f2xx_hal_uart.h
@@ -88,7 +88,7 @@
* 11 : Error
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized. HAL UART Init function already called)
+ * 1 : Init done (Peripheral initialized. HAL UART Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
@@ -105,7 +105,7 @@
* xx : Should be set to 00
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized)
+ * 1 : Init done (Peripheral initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
@@ -136,6 +136,15 @@
} HAL_UART_StateTypeDef;
/**
+ * @brief HAL UART Reception type definition
+ * @note HAL UART Reception type value aims to identify which type of Reception is ongoing.
+ * It is expected to admit following values :
+ * HAL_UART_RECEPTION_STANDARD = 0x00U,
+ * HAL_UART_RECEPTION_TOIDLE = 0x01U,
+ */
+typedef uint32_t HAL_UART_RxTypeTypeDef;
+
+/**
* @brief UART handle Structure definition
*/
typedef struct __UART_HandleTypeDef
@@ -156,6 +165,8 @@
__IO uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
+ __IO HAL_UART_RxTypeTypeDef ReceptionType; /*!< Type of ongoing reception */
+
DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
@@ -181,6 +192,7 @@
void (* AbortTransmitCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Transmit Complete Callback */
void (* AbortReceiveCpltCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Abort Receive Complete Callback */
void (* WakeupCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Wakeup Callback */
+ void (* RxEventCallback)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< UART Reception Event Callback */
void (* MspInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp Init callback */
void (* MspDeInitCallback)(struct __UART_HandleTypeDef *huart); /*!< UART Msp DeInit callback */
@@ -213,6 +225,7 @@
* @brief HAL UART Callback pointer definition
*/
typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */
+typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
@@ -369,6 +382,15 @@
* @}
*/
+/** @defgroup UART_RECEPTION_TYPE_Values UART Reception type values
+ * @{
+ */
+#define HAL_UART_RECEPTION_STANDARD (0x00000000U) /*!< Standard reception */
+#define HAL_UART_RECEPTION_TOIDLE (0x00000001U) /*!< Reception till completion or IDLE event */
+/**
+ * @}
+ */
+
/**
* @}
*/
@@ -682,6 +704,9 @@
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_UART_RegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID, pUART_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_UART_UnRegisterCallback(UART_HandleTypeDef *huart, HAL_UART_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
@@ -702,6 +727,11 @@
HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+
/* Transfer Abort functions */
HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart);
@@ -720,6 +750,8 @@
void HAL_UART_AbortTransmitCpltCallback(UART_HandleTypeDef *huart);
void HAL_UART_AbortReceiveCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size);
+
/**
* @}
*/
@@ -825,6 +857,9 @@
* @{
*/
+HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+
/**
* @}
*/
diff --git a/Inc/stm32f2xx_ll_adc.h b/Inc/stm32f2xx_ll_adc.h
index d0b544c..bab62e4 100644
--- a/Inc/stm32f2xx_ll_adc.h
+++ b/Inc/stm32f2xx_ll_adc.h
@@ -392,7 +392,7 @@
{
uint32_t TriggerSource; /*!< Set ADC group regular conversion trigger source: internal (SW start) or from external IP (timer event, external interrupt line).
This parameter can be a value of @ref ADC_LL_EC_REG_TRIGGER_SOURCE
- @note On this STM32 serie, setting of external trigger edge is performed
+ @note On this STM32 series, setting of external trigger edge is performed
using function @ref LL_ADC_REG_StartConversionExtTrig().
This feature can be modified afterwards using unitary function @ref LL_ADC_REG_SetTriggerSource(). */
@@ -446,7 +446,7 @@
{
uint32_t TriggerSource; /*!< Set ADC group injected conversion trigger source: internal (SW start) or from external IP (timer event, external interrupt line).
This parameter can be a value of @ref ADC_LL_EC_INJ_TRIGGER_SOURCE
- @note On this STM32 serie, setting of external trigger edge is performed
+ @note On this STM32 series, setting of external trigger edge is performed
using function @ref LL_ADC_INJ_StartConversionExtTrig().
This feature can be modified afterwards using unitary function @ref LL_ADC_INJ_SetTriggerSource(). */
@@ -490,7 +490,7 @@
#define LL_ADC_FLAG_EOCS ADC_SR_EOC /*!< ADC flag ADC group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */
#define LL_ADC_FLAG_OVR ADC_SR_OVR /*!< ADC flag ADC group regular overrun */
#define LL_ADC_FLAG_JSTRT ADC_SR_JSTRT /*!< ADC flag ADC group injected conversion start */
-#define LL_ADC_FLAG_JEOS ADC_SR_JEOC /*!< ADC flag ADC group injected end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
+#define LL_ADC_FLAG_JEOS ADC_SR_JEOC /*!< ADC flag ADC group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
#define LL_ADC_FLAG_AWD1 ADC_SR_AWD /*!< ADC flag ADC analog watchdog 1 */
#define LL_ADC_FLAG_EOCS_MST ADC_CSR_EOC1 /*!< ADC flag ADC multimode master group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */
#define LL_ADC_FLAG_EOCS_SLV1 ADC_CSR_EOC2 /*!< ADC flag ADC multimode slave 1 group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */
@@ -498,9 +498,9 @@
#define LL_ADC_FLAG_OVR_MST ADC_CSR_OVR1 /*!< ADC flag ADC multimode master group regular overrun */
#define LL_ADC_FLAG_OVR_SLV1 ADC_CSR_OVR2 /*!< ADC flag ADC multimode slave 1 group regular overrun */
#define LL_ADC_FLAG_OVR_SLV2 ADC_CSR_OVR3 /*!< ADC flag ADC multimode slave 2 group regular overrun */
-#define LL_ADC_FLAG_JEOS_MST ADC_CSR_JEOC1 /*!< ADC flag ADC multimode master group injected end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
-#define LL_ADC_FLAG_JEOS_SLV1 ADC_CSR_JEOC2 /*!< ADC flag ADC multimode slave 1 group injected end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
-#define LL_ADC_FLAG_JEOS_SLV2 ADC_CSR_JEOC3 /*!< ADC flag ADC multimode slave 2 group injected end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
+#define LL_ADC_FLAG_JEOS_MST ADC_CSR_JEOC1 /*!< ADC flag ADC multimode master group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
+#define LL_ADC_FLAG_JEOS_SLV1 ADC_CSR_JEOC2 /*!< ADC flag ADC multimode slave 1 group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
+#define LL_ADC_FLAG_JEOS_SLV2 ADC_CSR_JEOC3 /*!< ADC flag ADC multimode slave 2 group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
#define LL_ADC_FLAG_AWD1_MST ADC_CSR_AWD1 /*!< ADC flag ADC multimode master analog watchdog 1 of the ADC master */
#define LL_ADC_FLAG_AWD1_SLV1 ADC_CSR_AWD2 /*!< ADC flag ADC multimode slave 1 analog watchdog 1 */
#define LL_ADC_FLAG_AWD1_SLV2 ADC_CSR_AWD3 /*!< ADC flag ADC multimode slave 2 analog watchdog 1 */
@@ -514,7 +514,7 @@
*/
#define LL_ADC_IT_EOCS ADC_CR1_EOCIE /*!< ADC interruption ADC group regular end of unitary conversion or sequence conversions (to configure flag of end of conversion, use function @ref LL_ADC_REG_SetFlagEndOfConversion() ) */
#define LL_ADC_IT_OVR ADC_CR1_OVRIE /*!< ADC interruption ADC group regular overrun */
-#define LL_ADC_IT_JEOS ADC_CR1_JEOCIE /*!< ADC interruption ADC group injected end of sequence conversions (Note: on this STM32 serie, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
+#define LL_ADC_IT_JEOS ADC_CR1_JEOCIE /*!< ADC interruption ADC group injected end of sequence conversions (Note: on this STM32 series, there is no flag ADC group injected end of unitary conversion. Flag noted as "JEOC" is corresponding to flag "JEOS" in other STM32 families) */
#define LL_ADC_IT_AWD1 ADC_CR1_AWDIE /*!< ADC interruption ADC analog watchdog 1 */
/**
* @}
@@ -551,7 +551,7 @@
/* If they are not listed below, they do not require any specific */
/* path enable. In this case, Access to measurement path is done */
/* only by selecting the corresponding ADC internal channel. */
-#define LL_ADC_PATH_INTERNAL_NONE 0x00000000U /*!< ADC measurement pathes all disabled */
+#define LL_ADC_PATH_INTERNAL_NONE 0x00000000U /*!< ADC measurement paths all disabled */
#define LL_ADC_PATH_INTERNAL_VREFINT (ADC_CCR_TSVREFE) /*!< ADC measurement path to internal channel VrefInt */
#define LL_ADC_PATH_INTERNAL_TEMPSENSOR (ADC_CCR_TSVREFE) /*!< ADC measurement path to internal channel temperature sensor */
#define LL_ADC_PATH_INTERNAL_VBAT (ADC_CCR_VBATE) /*!< ADC measurement path to internal channel Vbat */
@@ -574,7 +574,7 @@
* @{
*/
#define LL_ADC_DATA_ALIGN_RIGHT 0x00000000U /*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/
-#define LL_ADC_DATA_ALIGN_LEFT (ADC_CR2_ALIGN) /*!< ADC conversion data alignment: left aligned (aligment on data register MSB bit 15)*/
+#define LL_ADC_DATA_ALIGN_LEFT (ADC_CR2_ALIGN) /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/
/**
* @}
*/
@@ -1021,7 +1021,7 @@
/* configuration (system clock versus ADC clock), */
/* and therefore must be defined in user application. */
/* Indications for estimation of ADC timeout delays, for this */
-/* STM32 serie: */
+/* STM32 series: */
/* - ADC enable time: maximum delay is 2us */
/* (refer to device datasheet, parameter "tSTAB") */
/* - ADC conversion time: duration depending on ADC clock and ADC */
@@ -1971,7 +1971,7 @@
* @brief Set ADC group regular conversion trigger source:
* internal (SW start) or from external IP (timer event,
* external interrupt line).
- * @note On this STM32 serie, setting of external trigger edge is performed
+ * @note On this STM32 series, setting of external trigger edge is performed
* using function @ref LL_ADC_REG_StartConversionExtTrig().
* @note Availability of parameters of trigger sources from timer
* depends on timers availability on the selected device.
@@ -2000,7 +2000,7 @@
*/
__STATIC_INLINE void LL_ADC_REG_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource)
{
-/* Note: On this STM32 serie, ADC group regular external trigger edge */
+/* Note: On this STM32 series, ADC group regular external trigger edge */
/* is used to perform a ADC conversion start. */
/* This function does not set external trigger edge. */
/* This feature is set using function */
@@ -2077,7 +2077,7 @@
/**
* @brief Get ADC group regular conversion trigger polarity.
* @note Applicable only for trigger source set to external trigger.
- * @note On this STM32 serie, setting of external trigger edge is performed
+ * @note On this STM32 series, setting of external trigger edge is performed
* using function @ref LL_ADC_REG_StartConversionExtTrig().
* @rmtoll CR2 EXTEN LL_ADC_REG_GetTriggerEdge
* @param ADCx ADC instance
@@ -2119,7 +2119,7 @@
* highest channel number).
* Sequencer ranks are selected using
* function "LL_ADC_REG_SetSequencerChannels()".
- * @note On this STM32 serie, group regular sequencer configuration
+ * @note On this STM32 series, group regular sequencer configuration
* is conditioned to ADC instance sequencer mode.
* If ADC instance sequencer mode is disabled, sequencers of
* all groups (group regular, group injected) can be configured
@@ -2180,7 +2180,7 @@
* highest channel number).
* Sequencer ranks are selected using
* function "LL_ADC_REG_SetSequencerChannels()".
- * @note On this STM32 serie, group regular sequencer configuration
+ * @note On this STM32 series, group regular sequencer configuration
* is conditioned to ADC instance sequencer mode.
* If ADC instance sequencer mode is disabled, sequencers of
* all groups (group regular, group injected) can be configured
@@ -2270,13 +2270,13 @@
* @note This function performs configuration of:
* - Channels ordering into each rank of scan sequence:
* whatever channel can be placed into whatever rank.
- * @note On this STM32 serie, ADC group regular sequencer is
+ * @note On this STM32 series, ADC group regular sequencer is
* fully configurable: sequencer length and each rank
* affectation to a channel are configurable.
* Refer to description of function @ref LL_ADC_REG_SetSequencerLength().
* @note Depending on devices and packages, some channels may not be available.
* Refer to device datasheet for channels availability.
- * @note On this STM32 serie, to measure internal channels (VrefInt,
+ * @note On this STM32 series, to measure internal channels (VrefInt,
* TempSensor, ...), measurement paths to internal channels must be
* enabled separately.
* This can be done using function @ref LL_ADC_SetCommonPathInternalCh().
@@ -2357,7 +2357,7 @@
/**
* @brief Get ADC group regular sequence: channel on the selected
* scan sequence rank.
- * @note On this STM32 serie, ADC group regular sequencer is
+ * @note On this STM32 series, ADC group regular sequencer is
* fully configurable: sequencer length and each rank
* affectation to a channel are configurable.
* Refer to description of function @ref LL_ADC_REG_SetSequencerLength().
@@ -2604,7 +2604,7 @@
* @brief Set ADC group injected conversion trigger source:
* internal (SW start) or from external IP (timer event,
* external interrupt line).
- * @note On this STM32 serie, setting of external trigger edge is performed
+ * @note On this STM32 series, setting of external trigger edge is performed
* using function @ref LL_ADC_INJ_StartConversionExtTrig().
* @note Availability of parameters of trigger sources from timer
* depends on timers availability on the selected device.
@@ -2633,7 +2633,7 @@
*/
__STATIC_INLINE void LL_ADC_INJ_SetTriggerSource(ADC_TypeDef *ADCx, uint32_t TriggerSource)
{
-/* Note: On this STM32 serie, ADC group injected external trigger edge */
+/* Note: On this STM32 series, ADC group injected external trigger edge */
/* is used to perform a ADC conversion start. */
/* This function does not set external trigger edge. */
/* This feature is set using function */
@@ -2728,7 +2728,7 @@
* - Sequence length: Number of ranks in the scan sequence.
* - Sequence direction: Unless specified in parameters, sequencer
* scan direction is forward (from rank 1 to rank n).
- * @note On this STM32 serie, group injected sequencer configuration
+ * @note On this STM32 series, group injected sequencer configuration
* is conditioned to ADC instance sequencer mode.
* If ADC instance sequencer mode is disabled, sequencers of
* all groups (group regular, group injected) can be configured
@@ -2756,7 +2756,7 @@
* - Sequence length: Number of ranks in the scan sequence.
* - Sequence direction: Unless specified in parameters, sequencer
* scan direction is forward (from rank 1 to rank n).
- * @note On this STM32 serie, group injected sequencer configuration
+ * @note On this STM32 series, group injected sequencer configuration
* is conditioned to ADC instance sequencer mode.
* If ADC instance sequencer mode is disabled, sequencers of
* all groups (group regular, group injected) can be configured
@@ -2815,7 +2815,7 @@
* sequence rank.
* @note Depending on devices and packages, some channels may not be available.
* Refer to device datasheet for channels availability.
- * @note On this STM32 serie, to measure internal channels (VrefInt,
+ * @note On this STM32 series, to measure internal channels (VrefInt,
* TempSensor, ...), measurement paths to internal channels must be
* enabled separately.
* This can be done using function @ref LL_ADC_SetCommonPathInternalCh().
@@ -3062,7 +3062,7 @@
* TS_temp, ...).
* @note Conversion time is the addition of sampling time and processing time.
* Refer to reference manual for ADC processing time of
- * this STM32 serie.
+ * this STM32 series.
* @note In case of ADC conversion of internal channel (VrefInt,
* temperature sensor, ...), a sampling time minimum value
* is required.
@@ -3143,7 +3143,7 @@
* of channel mapped on ADC group regular or injected.
* @note Conversion time is the addition of sampling time and processing time.
* Refer to reference manual for ADC processing time of
- * this STM32 serie.
+ * this STM32 series.
* @rmtoll SMPR1 SMP18 LL_ADC_GetChannelSamplingTime\n
* SMPR1 SMP17 LL_ADC_GetChannelSamplingTime\n
* SMPR1 SMP16 LL_ADC_GetChannelSamplingTime\n
@@ -3226,7 +3226,7 @@
* @note In case of need to define a single channel to monitor
* with analog watchdog from sequencer channel definition,
* use helper macro @ref __LL_ADC_ANALOGWD_CHANNEL_GROUP().
- * @note On this STM32 serie, there is only 1 kind of analog watchdog
+ * @note On this STM32 series, there is only 1 kind of analog watchdog
* instance:
* - AWD standard (instance AWD1):
* - channels monitored: can monitor 1 channel or all channels.
@@ -3334,7 +3334,7 @@
* @ref __LL_ADC_CHANNEL_TO_DECIMAL_NB().
* Applicable only when the analog watchdog is set to monitor
* one channel.
- * @note On this STM32 serie, there is only 1 kind of analog watchdog
+ * @note On this STM32 series, there is only 1 kind of analog watchdog
* instance:
* - AWD standard (instance AWD1):
* - channels monitored: can monitor 1 channel or all channels.
@@ -3419,7 +3419,7 @@
* @note In case of ADC resolution different of 12 bits,
* analog watchdog thresholds data require a specific shift.
* Use helper macro @ref __LL_ADC_ANALOGWD_SET_THRESHOLD_RESOLUTION().
- * @note On this STM32 serie, there is only 1 kind of analog watchdog
+ * @note On this STM32 series, there is only 1 kind of analog watchdog
* instance:
* - AWD standard (instance AWD1):
* - channels monitored: can monitor 1 channel or all channels.
@@ -3702,7 +3702,7 @@
/**
* @brief Enable the selected ADC instance.
- * @note On this STM32 serie, after ADC enable, a delay for
+ * @note On this STM32 series, after ADC enable, a delay for
* ADC internal analog stabilization is required before performing a
* ADC conversion start.
* Refer to device datasheet, parameter tSTAB.
@@ -3747,7 +3747,7 @@
/**
* @brief Start ADC group regular conversion.
- * @note On this STM32 serie, this function is relevant only for
+ * @note On this STM32 series, this function is relevant only for
* internal trigger (SW start), not for external trigger:
* - If ADC trigger has been set to software start, ADC conversion
* starts immediately.
@@ -3770,7 +3770,7 @@
* @brief Start ADC group regular conversion from external trigger.
* @note ADC conversion will start at next trigger event (on the selected
* trigger edge) following the ADC start conversion command.
- * @note On this STM32 serie, this function is relevant for
+ * @note On this STM32 series, this function is relevant for
* ADC conversion start from external trigger.
* If internal trigger (SW start) is needed, perform ADC conversion
* start using function @ref LL_ADC_REG_StartConversionSWStart().
@@ -3792,7 +3792,7 @@
* @note No more ADC conversion will start at next trigger event
* following the ADC stop conversion command.
* If a conversion is on-going, it will be completed.
- * @note On this STM32 serie, there is no specific command
+ * @note On this STM32 series, there is no specific command
* to stop a conversion on-going or to stop ADC converting
* in continuous mode. These actions can be performed
* using function @ref LL_ADC_Disable().
@@ -3918,7 +3918,7 @@
/**
* @brief Start ADC group injected conversion.
- * @note On this STM32 serie, this function is relevant only for
+ * @note On this STM32 series, this function is relevant only for
* internal trigger (SW start), not for external trigger:
* - If ADC trigger has been set to software start, ADC conversion
* starts immediately.
@@ -3941,7 +3941,7 @@
* @brief Start ADC group injected conversion from external trigger.
* @note ADC conversion will start at next trigger event (on the selected
* trigger edge) following the ADC start conversion command.
- * @note On this STM32 serie, this function is relevant for
+ * @note On this STM32 series, this function is relevant for
* ADC conversion start from external trigger.
* If internal trigger (SW start) is needed, perform ADC conversion
* start using function @ref LL_ADC_INJ_StartConversionSWStart().
@@ -3963,7 +3963,7 @@
* @note No more ADC conversion will start at next trigger event
* following the ADC stop conversion command.
* If a conversion is on-going, it will be completed.
- * @note On this STM32 serie, there is no specific command
+ * @note On this STM32 series, there is no specific command
* to stop a conversion on-going or to stop ADC converting
* in continuous mode. These actions can be performed
* using function @ref LL_ADC_Disable().
@@ -4153,7 +4153,7 @@
*/
__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_JEOS(ADC_TypeDef *ADCx)
{
- /* Note: on this STM32 serie, there is no flag ADC group injected */
+ /* Note: on this STM32 series, there is no flag ADC group injected */
/* end of unitary conversion. */
/* Flag noted as "JEOC" is corresponding to flag "JEOS" */
/* in other STM32 families). */
@@ -4206,7 +4206,7 @@
*/
__STATIC_INLINE void LL_ADC_ClearFlag_JEOS(ADC_TypeDef *ADCx)
{
- /* Note: on this STM32 serie, there is no flag ADC group injected */
+ /* Note: on this STM32 series, there is no flag ADC group injected */
/* end of unitary conversion. */
/* Flag noted as "JEOC" is corresponding to flag "JEOS" */
/* in other STM32 families). */
@@ -4317,7 +4317,7 @@
*/
__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_MST_JEOS(ADC_Common_TypeDef *ADCxy_COMMON)
{
- /* Note: on this STM32 serie, there is no flag ADC group injected */
+ /* Note: on this STM32 series, there is no flag ADC group injected */
/* end of unitary conversion. */
/* Flag noted as "JEOC" is corresponding to flag "JEOS" */
/* in other STM32 families). */
@@ -4333,7 +4333,7 @@
*/
__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV1_JEOS(ADC_Common_TypeDef *ADCxy_COMMON)
{
- /* Note: on this STM32 serie, there is no flag ADC group injected */
+ /* Note: on this STM32 series, there is no flag ADC group injected */
/* end of unitary conversion. */
/* Flag noted as "JEOC" is corresponding to flag "JEOS" */
/* in other STM32 families). */
@@ -4349,7 +4349,7 @@
*/
__STATIC_INLINE uint32_t LL_ADC_IsActiveFlag_SLV2_JEOS(ADC_Common_TypeDef *ADCxy_COMMON)
{
- /* Note: on this STM32 serie, there is no flag ADC group injected */
+ /* Note: on this STM32 series, there is no flag ADC group injected */
/* end of unitary conversion. */
/* Flag noted as "JEOC" is corresponding to flag "JEOS" */
/* in other STM32 families). */
@@ -4436,7 +4436,7 @@
*/
__STATIC_INLINE void LL_ADC_EnableIT_JEOS(ADC_TypeDef *ADCx)
{
- /* Note: on this STM32 serie, there is no flag ADC group injected */
+ /* Note: on this STM32 series, there is no flag ADC group injected */
/* end of unitary conversion. */
/* Flag noted as "JEOC" is corresponding to flag "JEOS" */
/* in other STM32 families). */
@@ -4489,7 +4489,7 @@
*/
__STATIC_INLINE void LL_ADC_DisableIT_JEOS(ADC_TypeDef *ADCx)
{
- /* Note: on this STM32 serie, there is no flag ADC group injected */
+ /* Note: on this STM32 series, there is no flag ADC group injected */
/* end of unitary conversion. */
/* Flag noted as "JEOC" is corresponding to flag "JEOS" */
/* in other STM32 families). */
@@ -4545,7 +4545,7 @@
*/
__STATIC_INLINE uint32_t LL_ADC_IsEnabledIT_JEOS(ADC_TypeDef *ADCx)
{
- /* Note: on this STM32 serie, there is no flag ADC group injected */
+ /* Note: on this STM32 series, there is no flag ADC group injected */
/* end of unitary conversion. */
/* Flag noted as "JEOC" is corresponding to flag "JEOS" */
/* in other STM32 families). */
diff --git a/Inc/stm32f2xx_ll_dac.h b/Inc/stm32f2xx_ll_dac.h
index 2dfa4bd..9ae8103 100644
--- a/Inc/stm32f2xx_ll_dac.h
+++ b/Inc/stm32f2xx_ll_dac.h
@@ -52,38 +52,62 @@
/* - channel bits position into register SWTRIG */
/* - channel register offset of data holding register DHRx */
/* - channel register offset of data output register DORx */
-#define DAC_CR_CH1_BITOFFSET 0U /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 1 */
-#define DAC_CR_CH2_BITOFFSET 16U /* Position of channel bits into registers CR, MCR, CCR, SHHR, SHRR of channel 2 */
+#define DAC_CR_CH1_BITOFFSET 0UL /* Position of channel bits into registers
+ CR, MCR, CCR, SHHR, SHRR of channel 1 */
+#define DAC_CR_CH2_BITOFFSET 16UL /* Position of channel bits into registers
+ CR, MCR, CCR, SHHR, SHRR of channel 2 */
#define DAC_CR_CHX_BITOFFSET_MASK (DAC_CR_CH1_BITOFFSET | DAC_CR_CH2_BITOFFSET)
#define DAC_SWTR_CH1 (DAC_SWTRIGR_SWTRIG1) /* Channel bit into register SWTRIGR of channel 1. */
#define DAC_SWTR_CH2 (DAC_SWTRIGR_SWTRIG2) /* Channel bit into register SWTRIGR of channel 2. */
#define DAC_SWTR_CHX_MASK (DAC_SWTR_CH1 | DAC_SWTR_CH2)
-#define DAC_REG_DHR12R1_REGOFFSET 0x00000000U /* Register DHR12Rx channel 1 taken as reference */
-#define DAC_REG_DHR12L1_REGOFFSET 0x00100000U /* Register offset of DHR12Lx channel 1 versus DHR12Rx channel 1 (shifted left of 20 bits) */
-#define DAC_REG_DHR8R1_REGOFFSET 0x02000000U /* Register offset of DHR8Rx channel 1 versus DHR12Rx channel 1 (shifted left of 24 bits) */
-#define DAC_REG_DHR12R2_REGOFFSET 0x00030000U /* Register offset of DHR12Rx channel 2 versus DHR12Rx channel 1 (shifted left of 16 bits) */
-#define DAC_REG_DHR12L2_REGOFFSET 0x00400000U /* Register offset of DHR12Lx channel 2 versus DHR12Rx channel 1 (shifted left of 20 bits) */
-#define DAC_REG_DHR8R2_REGOFFSET 0x05000000U /* Register offset of DHR8Rx channel 2 versus DHR12Rx channel 1 (shifted left of 24 bits) */
-#define DAC_REG_DHR12RX_REGOFFSET_MASK 0x000F0000U
-#define DAC_REG_DHR12LX_REGOFFSET_MASK 0x00F00000U
-#define DAC_REG_DHR8RX_REGOFFSET_MASK 0x0F000000U
-#define DAC_REG_DHRX_REGOFFSET_MASK (DAC_REG_DHR12RX_REGOFFSET_MASK | DAC_REG_DHR12LX_REGOFFSET_MASK | DAC_REG_DHR8RX_REGOFFSET_MASK)
+#define DAC_REG_DHR12R1_REGOFFSET 0x00000000UL /* Register DHR12Rx channel 1 taken as reference */
+#define DAC_REG_DHR12L1_REGOFFSET 0x00100000UL /* Register offset of DHR12Lx channel 1 versus
+ DHR12Rx channel 1 (shifted left of 20 bits) */
+#define DAC_REG_DHR8R1_REGOFFSET 0x02000000UL /* Register offset of DHR8Rx channel 1 versus
+ DHR12Rx channel 1 (shifted left of 24 bits) */
-#define DAC_REG_DOR1_REGOFFSET 0x00000000U /* Register DORx channel 1 taken as reference */
-#define DAC_REG_DOR2_REGOFFSET 0x10000000U /* Register offset of DORx channel 1 versus DORx channel 2 (shifted left of 28 bits) */
+#define DAC_REG_DHR12R2_REGOFFSET 0x00030000UL /* Register offset of DHR12Rx channel 2 versus
+ DHR12Rx channel 1 (shifted left of 16 bits) */
+#define DAC_REG_DHR12L2_REGOFFSET 0x00400000UL /* Register offset of DHR12Lx channel 2 versus
+ DHR12Rx channel 1 (shifted left of 20 bits) */
+#define DAC_REG_DHR8R2_REGOFFSET 0x05000000UL /* Register offset of DHR8Rx channel 2 versus
+ DHR12Rx channel 1 (shifted left of 24 bits) */
+
+#define DAC_REG_DHR12RX_REGOFFSET_MASK 0x000F0000UL
+#define DAC_REG_DHR12LX_REGOFFSET_MASK 0x00F00000UL
+#define DAC_REG_DHR8RX_REGOFFSET_MASK 0x0F000000UL
+#define DAC_REG_DHRX_REGOFFSET_MASK (DAC_REG_DHR12RX_REGOFFSET_MASK\
+ | DAC_REG_DHR12LX_REGOFFSET_MASK | DAC_REG_DHR8RX_REGOFFSET_MASK)
+
+#define DAC_REG_DOR1_REGOFFSET 0x00000000UL /* Register DORx channel 1 taken as reference */
+
+#define DAC_REG_DOR2_REGOFFSET 0x10000000UL /* Register offset of DORx channel 1 versus
+ DORx channel 2 (shifted left of 28 bits) */
#define DAC_REG_DORX_REGOFFSET_MASK (DAC_REG_DOR1_REGOFFSET | DAC_REG_DOR2_REGOFFSET)
-#define DAC_REG_DHR_REGOFFSET_MASK_POSBIT0 0x0000000FU /* Mask of data hold registers offset (DHR12Rx, DHR12Lx, DHR8Rx, ...) when shifted to position 0 */
-#define DAC_REG_DORX_REGOFFSET_MASK_POSBIT0 0x00000001U /* Mask of DORx registers offset when shifted to position 0 */
-#define DAC_REG_SHSRX_REGOFFSET_MASK_POSBIT0 0x00000001U /* Mask of SHSRx registers offset when shifted to position 0 */
-#define DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS 16U /* Position of bits register offset of DHR12Rx channel 1 or 2 versus DHR12Rx channel 1 (shifted left of 16 bits) */
-#define DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS 20U /* Position of bits register offset of DHR12Lx channel 1 or 2 versus DHR12Rx channel 1 (shifted left of 20 bits) */
-#define DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS 24U /* Position of bits register offset of DHR8Rx channel 1 or 2 versus DHR12Rx channel 1 (shifted left of 24 bits) */
-#define DAC_REG_DORX_REGOFFSET_BITOFFSET_POS 28U /* Position of bits register offset of DORx channel 1 or 2 versus DORx channel 1 (shifted left of 28 bits) */
+#define DAC_REG_DHR_REGOFFSET_MASK_POSBIT0 0x0000000FUL /* Mask of data hold registers offset (DHR12Rx,
+ DHR12Lx, DHR8Rx, ...) when shifted to position 0 */
+#define DAC_REG_DORX_REGOFFSET_MASK_POSBIT0 0x00000001UL /* Mask of DORx registers offset when shifted
+ to position 0 */
+#define DAC_REG_SHSRX_REGOFFSET_MASK_POSBIT0 0x00000001UL /* Mask of SHSRx registers offset when shifted
+ to position 0 */
+
+#define DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS 16UL /* Position of bits register offset of DHR12Rx
+ channel 1 or 2 versus DHR12Rx channel 1
+ (shifted left of 16 bits) */
+#define DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS 20UL /* Position of bits register offset of DHR12Lx
+ channel 1 or 2 versus DHR12Rx channel 1
+ (shifted left of 20 bits) */
+#define DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS 24UL /* Position of bits register offset of DHR8Rx
+ channel 1 or 2 versus DHR12Rx channel 1
+ (shifted left of 24 bits) */
+#define DAC_REG_DORX_REGOFFSET_BITOFFSET_POS 28UL /* Position of bits register offset of DORx
+ channel 1 or 2 versus DORx channel 1
+ (shifted left of 28 bits) */
/* DAC registers bits positions */
#define DAC_DHR12RD_DACC2DHR_BITOFFSET_POS DAC_DHR12RD_DACC2DHR_Pos
@@ -91,7 +115,9 @@
#define DAC_DHR8RD_DACC2DHR_BITOFFSET_POS DAC_DHR8RD_DACC2DHR_Pos
/* Miscellaneous data */
-#define DAC_DIGITAL_SCALE_12BITS 4095U /* Full-scale digital value with a resolution of 12 bits (voltage range determined by analog voltage references Vref+ and Vref-, refer to reference manual) */
+#define DAC_DIGITAL_SCALE_12BITS 4095UL /* Full-scale digital value with a resolution of 12
+ bits (voltage range determined by analog voltage
+ references Vref+ and Vref-, refer to reference manual) */
/**
* @}
@@ -110,9 +136,9 @@
* @param __REG__ Register basis from which the offset is applied.
* @param __REG_OFFFSET__ Offset to be applied (unit: number of registers).
* @retval Pointer to register address
-*/
+ */
#define __DAC_PTR_REG_OFFSET(__REG__, __REG_OFFFSET__) \
- ((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2U))))
+ ((uint32_t *)((uint32_t) ((uint32_t)(&(__REG__)) + ((__REG_OFFFSET__) << 2UL))))
/**
* @}
@@ -130,29 +156,38 @@
*/
typedef struct
{
- uint32_t TriggerSource; /*!< Set the conversion trigger source for the selected DAC channel: internal (SW start) or from external peripheral (timer event, external interrupt line).
+ uint32_t TriggerSource; /*!< Set the conversion trigger source for the selected DAC channel:
+ internal (SW start) or from external peripheral
+ (timer event, external interrupt line).
This parameter can be a value of @ref DAC_LL_EC_TRIGGER_SOURCE
- This feature can be modified afterwards using unitary function @ref LL_DAC_SetTriggerSource(). */
+ This feature can be modified afterwards using unitary
+ function @ref LL_DAC_SetTriggerSource(). */
uint32_t WaveAutoGeneration; /*!< Set the waveform automatic generation mode for the selected DAC channel.
This parameter can be a value of @ref DAC_LL_EC_WAVE_AUTO_GENERATION_MODE
- This feature can be modified afterwards using unitary function @ref LL_DAC_SetWaveAutoGeneration(). */
+ This feature can be modified afterwards using unitary
+ function @ref LL_DAC_SetWaveAutoGeneration(). */
uint32_t WaveAutoGenerationConfig; /*!< Set the waveform automatic generation mode for the selected DAC channel.
- If waveform automatic generation mode is set to noise, this parameter can be a value of @ref DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS
- If waveform automatic generation mode is set to triangle, this parameter can be a value of @ref DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE
- @note If waveform automatic generation mode is disabled, this parameter is discarded.
+ If waveform automatic generation mode is set to noise, this parameter
+ can be a value of @ref DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS
+ If waveform automatic generation mode is set to triangle,
+ this parameter can be a value of @ref DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE
+ @note If waveform automatic generation mode is disabled,
+ this parameter is discarded.
- This feature can be modified afterwards using unitary function @ref LL_DAC_SetWaveNoiseLFSR(), @ref LL_DAC_SetWaveTriangleAmplitude()
+ This feature can be modified afterwards using unitary
+ function @ref LL_DAC_SetWaveNoiseLFSR(),
+ @ref LL_DAC_SetWaveTriangleAmplitude()
depending on the wave automatic generation selected. */
uint32_t OutputBuffer; /*!< Set the output buffer for the selected DAC channel.
This parameter can be a value of @ref DAC_LL_EC_OUTPUT_BUFFER
- This feature can be modified afterwards using unitary function @ref LL_DAC_SetOutputBuffer(). */
-
+ This feature can be modified afterwards using unitary
+ function @ref LL_DAC_SetOutputBuffer(). */
} LL_DAC_InitTypeDef;
/**
@@ -174,6 +209,7 @@
/* DAC channel 2 flags */
#define LL_DAC_FLAG_DMAUDR2 (DAC_SR_DMAUDR2) /*!< DAC channel 2 flag DMA underrun */
+
/**
* @}
*/
@@ -183,7 +219,9 @@
* @{
*/
#define LL_DAC_IT_DMAUDRIE1 (DAC_CR_DMAUDRIE1) /*!< DAC channel 1 interruption DMA underrun */
+
#define LL_DAC_IT_DMAUDRIE2 (DAC_CR_DMAUDRIE2) /*!< DAC channel 2 interruption DMA underrun */
+
/**
* @}
*/
@@ -192,7 +230,9 @@
* @{
*/
#define LL_DAC_CHANNEL_1 (DAC_REG_DOR1_REGOFFSET | DAC_REG_DHR12R1_REGOFFSET | DAC_REG_DHR12L1_REGOFFSET | DAC_REG_DHR8R1_REGOFFSET | DAC_CR_CH1_BITOFFSET | DAC_SWTR_CH1) /*!< DAC channel 1 */
+
#define LL_DAC_CHANNEL_2 (DAC_REG_DOR2_REGOFFSET | DAC_REG_DHR12R2_REGOFFSET | DAC_REG_DHR12L2_REGOFFSET | DAC_REG_DHR8R2_REGOFFSET | DAC_CR_CH2_BITOFFSET | DAC_SWTR_CH2) /*!< DAC channel 2 */
+
/**
* @}
*/
@@ -204,7 +244,7 @@
#define LL_DAC_TRIG_EXT_TIM2_TRGO (DAC_CR_TSEL1_2 ) /*!< DAC channel conversion trigger from external peripheral: TIM2 TRGO. */
#define LL_DAC_TRIG_EXT_TIM8_TRGO ( DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM8 TRGO. */
#define LL_DAC_TRIG_EXT_TIM4_TRGO (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM4 TRGO. */
-#define LL_DAC_TRIG_EXT_TIM6_TRGO 0x00000000U /*!< DAC channel conversion trigger from external peripheral: TIM6 TRGO. */
+#define LL_DAC_TRIG_EXT_TIM6_TRGO 0x00000000UL /*!< DAC channel conversion trigger from external peripheral: TIM6 TRGO. */
#define LL_DAC_TRIG_EXT_TIM7_TRGO ( DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external peripheral: TIM7 TRGO. */
#define LL_DAC_TRIG_EXT_TIM5_TRGO ( DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0) /*!< DAC channel conversion trigger from external peripheral: TIM5 TRGO. */
#define LL_DAC_TRIG_EXT_EXTI_LINE9 (DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 ) /*!< DAC channel conversion trigger from external peripheral: external interrupt line 9. */
@@ -215,7 +255,7 @@
/** @defgroup DAC_LL_EC_WAVE_AUTO_GENERATION_MODE DAC waveform automatic generation mode
* @{
*/
-#define LL_DAC_WAVE_AUTO_GENERATION_NONE 0x00000000U /*!< DAC channel wave auto generation mode disabled. */
+#define LL_DAC_WAVE_AUTO_GENERATION_NONE 0x00000000UL /*!< DAC channel wave auto generation mode disabled. */
#define LL_DAC_WAVE_AUTO_GENERATION_NOISE ( DAC_CR_WAVE1_0) /*!< DAC channel wave auto generation mode enabled, set generated noise waveform. */
#define LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE (DAC_CR_WAVE1_1 ) /*!< DAC channel wave auto generation mode enabled, set generated triangle waveform. */
/**
@@ -225,7 +265,7 @@
/** @defgroup DAC_LL_EC_WAVE_NOISE_LFSR_UNMASK_BITS DAC wave generation - Noise LFSR unmask bits
* @{
*/
-#define LL_DAC_NOISE_LFSR_UNMASK_BIT0 0x00000000U /*!< Noise wave generation, unmask LFSR bit0, for the selected DAC channel */
+#define LL_DAC_NOISE_LFSR_UNMASK_BIT0 0x00000000UL /*!< Noise wave generation, unmask LFSR bit0, for the selected DAC channel */
#define LL_DAC_NOISE_LFSR_UNMASK_BITS1_0 ( DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[1:0], for the selected DAC channel */
#define LL_DAC_NOISE_LFSR_UNMASK_BITS2_0 ( DAC_CR_MAMP1_1 ) /*!< Noise wave generation, unmask LFSR bits[2:0], for the selected DAC channel */
#define LL_DAC_NOISE_LFSR_UNMASK_BITS3_0 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Noise wave generation, unmask LFSR bits[3:0], for the selected DAC channel */
@@ -244,7 +284,7 @@
/** @defgroup DAC_LL_EC_WAVE_TRIANGLE_AMPLITUDE DAC wave generation - Triangle amplitude
* @{
*/
-#define LL_DAC_TRIANGLE_AMPLITUDE_1 0x00000000U /*!< Triangle wave generation, amplitude of 1 LSB of DAC output range, for the selected DAC channel */
+#define LL_DAC_TRIANGLE_AMPLITUDE_1 0x00000000UL /*!< Triangle wave generation, amplitude of 1 LSB of DAC output range, for the selected DAC channel */
#define LL_DAC_TRIANGLE_AMPLITUDE_3 ( DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 3 LSB of DAC output range, for the selected DAC channel */
#define LL_DAC_TRIANGLE_AMPLITUDE_7 ( DAC_CR_MAMP1_1 ) /*!< Triangle wave generation, amplitude of 7 LSB of DAC output range, for the selected DAC channel */
#define LL_DAC_TRIANGLE_AMPLITUDE_15 ( DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Triangle wave generation, amplitude of 15 LSB of DAC output range, for the selected DAC channel */
@@ -263,7 +303,7 @@
/** @defgroup DAC_LL_EC_OUTPUT_BUFFER DAC channel output buffer
* @{
*/
-#define LL_DAC_OUTPUT_BUFFER_ENABLE 0x00000000U /*!< The selected DAC channel output is buffered: higher drive current capability, but also higher current consumption */
+#define LL_DAC_OUTPUT_BUFFER_ENABLE 0x00000000UL /*!< The selected DAC channel output is buffered: higher drive current capability, but also higher current consumption */
#define LL_DAC_OUTPUT_BUFFER_DISABLE (DAC_CR_BOFF1) /*!< The selected DAC channel output is not buffered: lower drive current capability, but also lower current consumption */
/**
* @}
@@ -272,8 +312,8 @@
/** @defgroup DAC_LL_EC_RESOLUTION DAC channel output resolution
* @{
*/
-#define LL_DAC_RESOLUTION_12B 0x00000000U /*!< DAC channel resolution 12 bits */
-#define LL_DAC_RESOLUTION_8B 0x00000002U /*!< DAC channel resolution 8 bits */
+#define LL_DAC_RESOLUTION_12B 0x00000000UL /*!< DAC channel resolution 12 bits */
+#define LL_DAC_RESOLUTION_8B 0x00000002UL /*!< DAC channel resolution 8 bits */
/**
* @}
*/
@@ -311,7 +351,7 @@
/* Literal set to maximum value (refer to device datasheet, */
/* parameter "tWAKEUP"). */
/* Unit: us */
-#define LL_DAC_DELAY_STARTUP_VOLTAGE_SETTLING_US 15U /*!< Delay for DAC channel voltage settling time from DAC channel startup (transition from disable to enable) */
+#define LL_DAC_DELAY_STARTUP_VOLTAGE_SETTLING_US 15UL /*!< Delay for DAC channel voltage settling time from DAC channel startup (transition from disable to enable) */
/* Delay for DAC channel voltage settling time. */
/* Note: DAC channel startup time depends on board application environment: */
@@ -324,7 +364,7 @@
/* Literal set to maximum value (refer to device datasheet, */
/* parameter "tSETTLING"). */
/* Unit: us */
-#define LL_DAC_DELAY_VOLTAGE_SETTLING_US 12U /*!< Delay for DAC channel voltage settling time */
+#define LL_DAC_DELAY_VOLTAGE_SETTLING_US 12UL /*!< Delay for DAC channel voltage settling time */
/**
* @}
@@ -397,22 +437,8 @@
* @arg @ref LL_DAC_CHANNEL_1
* @arg @ref LL_DAC_CHANNEL_2
*/
-#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__) \
- (((__DECIMAL_NB__) == 1U) \
- ? ( \
- LL_DAC_CHANNEL_1 \
- ) \
- : \
- (((__DECIMAL_NB__) == 2U) \
- ? ( \
- LL_DAC_CHANNEL_2 \
- ) \
- : \
- ( \
- 0U \
- ) \
- ) \
- )
+#define __LL_DAC_DECIMAL_NB_TO_CHANNEL(__DECIMAL_NB__)\
+ (((__DECIMAL_NB__) == 1UL)? (LL_DAC_CHANNEL_1 ):(((__DECIMAL_NB__) == 2UL) ? ( LL_DAC_CHANNEL_2):(0UL)))
/**
* @brief Helper macro to define the DAC conversion data full-scale digital
@@ -426,7 +452,7 @@
* @retval ADC conversion data equivalent voltage value (unit: mVolt)
*/
#define __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \
- ((0x00000FFFU) >> ((__DAC_RESOLUTION__) << 1U))
+ ((0x00000FFFUL) >> ((__DAC_RESOLUTION__) << 1UL))
/**
* @brief Helper macro to calculate the DAC conversion data (unit: digital
@@ -437,7 +463,7 @@
* @ref LL_DAC_ConvertData12RightAligned().
* @note Analog reference voltage (Vref+) must be either known from
* user board environment or can be calculated using ADC measurement
- * and ADC helper macro @ref __LL_ADC_CALC_VREFANALOG_VOLTAGE().
+ * and ADC helper macro __LL_ADC_CALC_VREFANALOG_VOLTAGE().
* @param __VREFANALOG_VOLTAGE__ Analog reference voltage (unit: mV)
* @param __DAC_VOLTAGE__ Voltage to be generated by DAC channel
* (unit: mVolt).
@@ -449,9 +475,9 @@
#define __LL_DAC_CALC_VOLTAGE_TO_DATA(__VREFANALOG_VOLTAGE__,\
__DAC_VOLTAGE__,\
__DAC_RESOLUTION__) \
- ((__DAC_VOLTAGE__) * __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \
- / (__VREFANALOG_VOLTAGE__) \
- )
+((__DAC_VOLTAGE__) * __LL_DAC_DIGITAL_SCALE(__DAC_RESOLUTION__) \
+ / (__VREFANALOG_VOLTAGE__) \
+)
/**
* @}
@@ -817,7 +843,8 @@
* LL_DMA_ConfigAddresses(DMA1,
* LL_DMA_CHANNEL_1,
* (uint32_t)&< array or variable >,
- * LL_DAC_DMA_GetRegAddr(DAC1, LL_DAC_CHANNEL_1, LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED),
+ * LL_DAC_DMA_GetRegAddr(DAC1, LL_DAC_CHANNEL_1,
+ * LL_DAC_DMA_REG_DATA_12BITS_RIGHT_ALIGNED),
* LL_DMA_DIRECTION_MEMORY_TO_PERIPH);
* @rmtoll DHR12R1 DACC1DHR LL_DAC_DMA_GetRegAddr\n
* DHR12L1 DACC1DHR LL_DAC_DMA_GetRegAddr\n
@@ -839,8 +866,8 @@
{
/* Retrieve address of register DHR12Rx, DHR12Lx or DHR8Rx depending on */
/* DAC channel selected. */
- return ((uint32_t)(__DAC_PTR_REG_OFFSET((DACx)->DHR12R1,
- ((DAC_Channel >> (Register & 0x1FUL)) & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0))));
+ return ((uint32_t)(__DAC_PTR_REG_OFFSET((DACx)->DHR12R1, ((DAC_Channel >> (Register & 0x1FUL))
+ & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0))));
}
/**
* @}
@@ -1003,11 +1030,10 @@
*/
__STATIC_INLINE void LL_DAC_ConvertData12RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data)
{
- __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS) & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0);
+ __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12RX_REGOFFSET_BITOFFSET_POS)
+ & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0);
- MODIFY_REG(*preg,
- DAC_DHR12R1_DACC1DHR,
- Data);
+ MODIFY_REG(*preg, DAC_DHR12R1_DACC1DHR, Data);
}
/**
@@ -1025,11 +1051,10 @@
*/
__STATIC_INLINE void LL_DAC_ConvertData12LeftAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data)
{
- __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS) & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0);
+ __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR12LX_REGOFFSET_BITOFFSET_POS)
+ & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0);
- MODIFY_REG(*preg,
- DAC_DHR12L1_DACC1DHR,
- Data);
+ MODIFY_REG(*preg, DAC_DHR12L1_DACC1DHR, Data);
}
/**
@@ -1047,11 +1072,10 @@
*/
__STATIC_INLINE void LL_DAC_ConvertData8RightAligned(DAC_TypeDef *DACx, uint32_t DAC_Channel, uint32_t Data)
{
- __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS) & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0);
+ __IO uint32_t *preg = __DAC_PTR_REG_OFFSET(DACx->DHR12R1, (DAC_Channel >> DAC_REG_DHR8RX_REGOFFSET_BITOFFSET_POS)
+ & DAC_REG_DHR_REGOFFSET_MASK_POSBIT0);
- MODIFY_REG(*preg,
- DAC_DHR8R1_DACC1DHR,
- Data);
+ MODIFY_REG(*preg, DAC_DHR8R1_DACC1DHR, Data);
}
@@ -1132,7 +1156,8 @@
*/
__STATIC_INLINE uint32_t LL_DAC_RetrieveOutputData(DAC_TypeDef *DACx, uint32_t DAC_Channel)
{
- __IO uint32_t const *preg = __DAC_PTR_REG_OFFSET(DACx->DOR1, (DAC_Channel >> DAC_REG_DORX_REGOFFSET_BITOFFSET_POS) & DAC_REG_DORX_REGOFFSET_MASK_POSBIT0);
+ __IO uint32_t const *preg = __DAC_PTR_REG_OFFSET(DACx->DOR1, (DAC_Channel >> DAC_REG_DORX_REGOFFSET_BITOFFSET_POS)
+ & DAC_REG_DORX_REGOFFSET_MASK_POSBIT0);
return (uint16_t) READ_BIT(*preg, DAC_DOR1_DACC1DOR);
}
@@ -1144,6 +1169,7 @@
/** @defgroup DAC_LL_EF_FLAG_Management FLAG Management
* @{
*/
+
/**
* @brief Get DAC underrun flag for DAC channel 1
* @rmtoll SR DMAUDR1 LL_DAC_IsActiveFlag_DMAUDR1
diff --git a/Inc/stm32f2xx_ll_fsmc.h b/Inc/stm32f2xx_ll_fsmc.h
index 9652417..444504d 100644
--- a/Inc/stm32f2xx_ll_fsmc.h
+++ b/Inc/stm32f2xx_ll_fsmc.h
@@ -138,52 +138,52 @@
typedef struct
{
uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
- This parameter can be a value of @ref FSMC_NORSRAM_Bank */
+ This parameter can be a value of @ref FSMC_NORSRAM_Bank */
uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
multiplexed on the data bus or not.
- This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
+ This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
uint32_t MemoryType; /*!< Specifies the type of external memory attached to
the corresponding memory device.
- This parameter can be a value of @ref FSMC_Memory_Type */
+ This parameter can be a value of @ref FSMC_Memory_Type */
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
- This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */
+ This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */
uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
valid only with synchronous burst Flash memories.
- This parameter can be a value of @ref FSMC_Burst_Access_Mode */
+ This parameter can be a value of @ref FSMC_Burst_Access_Mode */
uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
the Flash memory in burst mode.
- This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
+ This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
memory, valid only when accessing Flash memories in burst mode.
- This parameter can be a value of @ref FSMC_Wrap_Mode */
+ This parameter can be a value of @ref FSMC_Wrap_Mode */
uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
clock cycle before the wait state or during the wait state,
valid only when accessing memories in burst mode.
- This parameter can be a value of @ref FSMC_Wait_Timing */
+ This parameter can be a value of @ref FSMC_Wait_Timing */
uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FSMC.
- This parameter can be a value of @ref FSMC_Write_Operation */
+ This parameter can be a value of @ref FSMC_Write_Operation */
uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
signal, valid for Flash memory access in burst mode.
- This parameter can be a value of @ref FSMC_Wait_Signal */
+ This parameter can be a value of @ref FSMC_Wait_Signal */
uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
- This parameter can be a value of @ref FSMC_Extended_Mode */
+ This parameter can be a value of @ref FSMC_Extended_Mode */
uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
valid only with asynchronous Flash memories.
- This parameter can be a value of @ref FSMC_AsynchronousWait */
+ This parameter can be a value of @ref FSMC_AsynchronousWait */
uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
- This parameter can be a value of @ref FSMC_Write_Burst */
+ This parameter can be a value of @ref FSMC_Write_Burst */
} FSMC_NORSRAM_InitTypeDef;
@@ -195,39 +195,40 @@
uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
the duration of the address setup time.
This parameter can be a value between Min_Data = 0 and Max_Data = 15.
- @note This parameter is not used with synchronous NOR Flash memories. */
+ @note This parameter is not used with synchronous NOR Flash memories. */
uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
the duration of the address hold time.
This parameter can be a value between Min_Data = 1 and Max_Data = 15.
- @note This parameter is not used with synchronous NOR Flash memories. */
+ @note This parameter is not used with synchronous NOR Flash memories. */
uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
the duration of the data setup time.
This parameter can be a value between Min_Data = 1 and Max_Data = 255.
@note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
- NOR Flash memories. */
+ NOR Flash memories. */
uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
the duration of the bus turnaround.
This parameter can be a value between Min_Data = 0 and Max_Data = 15.
- @note This parameter is only used for multiplexed NOR Flash memories. */
+ @note This parameter is only used for multiplexed NOR Flash memories. */
uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
- HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and
+ Max_Data = 16.
@note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
- accesses. */
+ accesses. */
uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
to the memory before getting the first data.
The parameter value depends on the memory type as shown below:
- It must be set to 0 in case of a CRAM
- It is don't care in asynchronous NOR, SRAM or ROM accesses
- - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
- with synchronous burst mode enable */
+ - It may assume a value between Min_Data = 2 and Max_Data = 17
+ in NOR Flash memories with synchronous burst mode enable */
uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
- This parameter can be a value of @ref FSMC_Access_Mode */
+ This parameter can be a value of @ref FSMC_Access_Mode */
} FSMC_NORSRAM_TimingTypeDef;
/**
@@ -236,19 +237,19 @@
typedef struct
{
uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
- This parameter can be a value of @ref FSMC_NAND_Bank */
+ This parameter can be a value of @ref FSMC_NAND_Bank */
uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
- This parameter can be any value of @ref FSMC_Wait_feature */
+ This parameter can be any value of @ref FSMC_Wait_feature */
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
- This parameter can be any value of @ref FSMC_NAND_Data_Width */
+ This parameter can be any value of @ref FSMC_NAND_Data_Width */
uint32_t EccComputation; /*!< Enables or disables the ECC computation.
- This parameter can be any value of @ref FSMC_ECC */
+ This parameter can be any value of @ref FSMC_ECC */
uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
- This parameter can be any value of @ref FSMC_ECC_Page_Size */
+ This parameter can be any value of @ref FSMC_ECC_Page_Size */
uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between CLE low and RE low.
@@ -799,7 +800,8 @@
HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device,
FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device,
- FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+ FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank,
+ uint32_t ExtendedMode);
HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device,
FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
/**
diff --git a/Inc/stm32f2xx_ll_i2c.h b/Inc/stm32f2xx_ll_i2c.h
index 41bfa14..72f3749 100644
--- a/Inc/stm32f2xx_ll_i2c.h
+++ b/Inc/stm32f2xx_ll_i2c.h
@@ -1360,7 +1360,7 @@
/**
* @brief Indicate the status of General call address reception (Slave mode).
- * @note RESET: No Generall call address
+ * @note RESET: No General call address
* SET: General call address received.
* @note This status is cleared by hardware after a STOP condition or repeated START condition.
* @rmtoll SR2 GENCALL LL_I2C_IsActiveFlag_GENCALL
diff --git a/Inc/stm32f2xx_ll_iwdg.h b/Inc/stm32f2xx_ll_iwdg.h
index f3ea9c2..e79fa26 100644
--- a/Inc/stm32f2xx_ll_iwdg.h
+++ b/Inc/stm32f2xx_ll_iwdg.h
@@ -236,7 +236,6 @@
return (READ_REG(IWDGx->RLR));
}
-
/**
* @}
*/
@@ -283,7 +282,6 @@
* @}
*/
-
/**
* @}
*/
diff --git a/Inc/stm32f2xx_ll_pwr.h b/Inc/stm32f2xx_ll_pwr.h
index 2578ca3..363f087 100644
--- a/Inc/stm32f2xx_ll_pwr.h
+++ b/Inc/stm32f2xx_ll_pwr.h
@@ -75,7 +75,7 @@
* @{
*/
#define LL_PWR_MODE_STOP_MAINREGU 0x00000000U /*!< Enter Stop mode when the CPU enters deepsleep */
-#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (ith low power regulator ON) when the CPU enters deepsleep */
+#define LL_PWR_MODE_STOP_LPREGU (PWR_CR_LPDS) /*!< Enter Stop mode (with low power regulator ON) when the CPU enters deepsleep */
#define LL_PWR_MODE_STANDBY (PWR_CR_PDDS) /*!< Enter Standby mode when the CPU enters deepsleep */
/**
* @}
diff --git a/Inc/stm32f2xx_ll_sdmmc.h b/Inc/stm32f2xx_ll_sdmmc.h
index 181b4b7..625eef7 100644
--- a/Inc/stm32f2xx_ll_sdmmc.h
+++ b/Inc/stm32f2xx_ll_sdmmc.h
@@ -129,202 +129,204 @@
/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants
* @{
*/
-#define SDMMC_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
-#define SDMMC_ERROR_CMD_CRC_FAIL ((uint32_t)0x00000001U) /*!< Command response received (but CRC check failed) */
-#define SDMMC_ERROR_DATA_CRC_FAIL ((uint32_t)0x00000002U) /*!< Data block sent/received (CRC check failed) */
-#define SDMMC_ERROR_CMD_RSP_TIMEOUT ((uint32_t)0x00000004U) /*!< Command response timeout */
-#define SDMMC_ERROR_DATA_TIMEOUT ((uint32_t)0x00000008U) /*!< Data timeout */
-#define SDMMC_ERROR_TX_UNDERRUN ((uint32_t)0x00000010U) /*!< Transmit FIFO underrun */
-#define SDMMC_ERROR_RX_OVERRUN ((uint32_t)0x00000020U) /*!< Receive FIFO overrun */
-#define SDMMC_ERROR_ADDR_MISALIGNED ((uint32_t)0x00000040U) /*!< Misaligned address */
-#define SDMMC_ERROR_BLOCK_LEN_ERR ((uint32_t)0x00000080U) /*!< Transferred block length is not allowed for the card or the
+#define SDMMC_ERROR_NONE 0x00000000U /*!< No error */
+#define SDMMC_ERROR_CMD_CRC_FAIL 0x00000001U /*!< Command response received (but CRC check failed) */
+#define SDMMC_ERROR_DATA_CRC_FAIL 0x00000002U /*!< Data block sent/received (CRC check failed) */
+#define SDMMC_ERROR_CMD_RSP_TIMEOUT 0x00000004U /*!< Command response timeout */
+#define SDMMC_ERROR_DATA_TIMEOUT 0x00000008U /*!< Data timeout */
+#define SDMMC_ERROR_TX_UNDERRUN 0x00000010U /*!< Transmit FIFO underrun */
+#define SDMMC_ERROR_RX_OVERRUN 0x00000020U /*!< Receive FIFO overrun */
+#define SDMMC_ERROR_ADDR_MISALIGNED 0x00000040U /*!< Misaligned address */
+#define SDMMC_ERROR_BLOCK_LEN_ERR 0x00000080U /*!< Transferred block length is not allowed for the card or the
number of transferred bytes does not match the block length */
-#define SDMMC_ERROR_ERASE_SEQ_ERR ((uint32_t)0x00000100U) /*!< An error in the sequence of erase command occurs */
-#define SDMMC_ERROR_BAD_ERASE_PARAM ((uint32_t)0x00000200U) /*!< An invalid selection for erase groups */
-#define SDMMC_ERROR_WRITE_PROT_VIOLATION ((uint32_t)0x00000400U) /*!< Attempt to program a write protect block */
-#define SDMMC_ERROR_LOCK_UNLOCK_FAILED ((uint32_t)0x00000800U) /*!< Sequence or password error has been detected in unlock
+#define SDMMC_ERROR_ERASE_SEQ_ERR 0x00000100U /*!< An error in the sequence of erase command occurs */
+#define SDMMC_ERROR_BAD_ERASE_PARAM 0x00000200U /*!< An invalid selection for erase groups */
+#define SDMMC_ERROR_WRITE_PROT_VIOLATION 0x00000400U /*!< Attempt to program a write protect block */
+#define SDMMC_ERROR_LOCK_UNLOCK_FAILED 0x00000800U /*!< Sequence or password error has been detected in unlock
command or if there was an attempt to access a locked card */
-#define SDMMC_ERROR_COM_CRC_FAILED ((uint32_t)0x00001000U) /*!< CRC check of the previous command failed */
-#define SDMMC_ERROR_ILLEGAL_CMD ((uint32_t)0x00002000U) /*!< Command is not legal for the card state */
-#define SDMMC_ERROR_CARD_ECC_FAILED ((uint32_t)0x00004000U) /*!< Card internal ECC was applied but failed to correct the data */
-#define SDMMC_ERROR_CC_ERR ((uint32_t)0x00008000U) /*!< Internal card controller error */
-#define SDMMC_ERROR_GENERAL_UNKNOWN_ERR ((uint32_t)0x00010000U) /*!< General or unknown error */
-#define SDMMC_ERROR_STREAM_READ_UNDERRUN ((uint32_t)0x00020000U) /*!< The card could not sustain data reading in stream rmode */
-#define SDMMC_ERROR_STREAM_WRITE_OVERRUN ((uint32_t)0x00040000U) /*!< The card could not sustain data programming in stream mode */
-#define SDMMC_ERROR_CID_CSD_OVERWRITE ((uint32_t)0x00080000U) /*!< CID/CSD overwrite error */
-#define SDMMC_ERROR_WP_ERASE_SKIP ((uint32_t)0x00100000U) /*!< Only partial address space was erased */
-#define SDMMC_ERROR_CARD_ECC_DISABLED ((uint32_t)0x00200000U) /*!< Command has been executed without using internal ECC */
-#define SDMMC_ERROR_ERASE_RESET ((uint32_t)0x00400000U) /*!< Erase sequence was cleared before executing because an out
+#define SDMMC_ERROR_COM_CRC_FAILED 0x00001000U /*!< CRC check of the previous command failed */
+#define SDMMC_ERROR_ILLEGAL_CMD 0x00002000U /*!< Command is not legal for the card state */
+#define SDMMC_ERROR_CARD_ECC_FAILED 0x00004000U /*!< Card internal ECC was applied but failed to correct the data */
+#define SDMMC_ERROR_CC_ERR 0x00008000U /*!< Internal card controller error */
+#define SDMMC_ERROR_GENERAL_UNKNOWN_ERR 0x00010000U /*!< General or unknown error */
+#define SDMMC_ERROR_STREAM_READ_UNDERRUN 0x00020000U /*!< The card could not sustain data reading in stream rmode */
+#define SDMMC_ERROR_STREAM_WRITE_OVERRUN 0x00040000U /*!< The card could not sustain data programming in stream mode */
+#define SDMMC_ERROR_CID_CSD_OVERWRITE 0x00080000U /*!< CID/CSD overwrite error */
+#define SDMMC_ERROR_WP_ERASE_SKIP 0x00100000U /*!< Only partial address space was erased */
+#define SDMMC_ERROR_CARD_ECC_DISABLED 0x00200000U /*!< Command has been executed without using internal ECC */
+#define SDMMC_ERROR_ERASE_RESET 0x00400000U /*!< Erase sequence was cleared before executing because an out
of erase sequence command was received */
-#define SDMMC_ERROR_AKE_SEQ_ERR ((uint32_t)0x00800000U) /*!< Error in sequence of authentication */
-#define SDMMC_ERROR_INVALID_VOLTRANGE ((uint32_t)0x01000000U) /*!< Error in case of invalid voltage range */
-#define SDMMC_ERROR_ADDR_OUT_OF_RANGE ((uint32_t)0x02000000U) /*!< Error when addressed block is out of range */
-#define SDMMC_ERROR_REQUEST_NOT_APPLICABLE ((uint32_t)0x04000000U) /*!< Error when command request is not applicable */
-#define SDMMC_ERROR_INVALID_PARAMETER ((uint32_t)0x08000000U) /*!< the used parameter is not valid */
-#define SDMMC_ERROR_UNSUPPORTED_FEATURE ((uint32_t)0x10000000U) /*!< Error when feature is not insupported */
-#define SDMMC_ERROR_BUSY ((uint32_t)0x20000000U) /*!< Error when transfer process is busy */
-#define SDMMC_ERROR_DMA ((uint32_t)0x40000000U) /*!< Error while DMA transfer */
-#define SDMMC_ERROR_TIMEOUT ((uint32_t)0x80000000U) /*!< Timeout error */
+#define SDMMC_ERROR_AKE_SEQ_ERR 0x00800000U /*!< Error in sequence of authentication */
+#define SDMMC_ERROR_INVALID_VOLTRANGE 0x01000000U /*!< Error in case of invalid voltage range */
+#define SDMMC_ERROR_ADDR_OUT_OF_RANGE 0x02000000U /*!< Error when addressed block is out of range */
+#define SDMMC_ERROR_REQUEST_NOT_APPLICABLE 0x04000000U /*!< Error when command request is not applicable */
+#define SDMMC_ERROR_INVALID_PARAMETER 0x08000000U /*!< the used parameter is not valid */
+#define SDMMC_ERROR_UNSUPPORTED_FEATURE 0x10000000U /*!< Error when feature is not insupported */
+#define SDMMC_ERROR_BUSY 0x20000000U /*!< Error when transfer process is busy */
+#define SDMMC_ERROR_DMA 0x40000000U /*!< Error while DMA transfer */
+#define SDMMC_ERROR_TIMEOUT 0x80000000U /*!< Timeout error */
/**
* @brief SDMMC Commands Index
*/
-#define SDMMC_CMD_GO_IDLE_STATE ((uint8_t)0U) /*!< Resets the SD memory card. */
-#define SDMMC_CMD_SEND_OP_COND ((uint8_t)1U) /*!< Sends host capacity support information and activates the card's initialization process. */
-#define SDMMC_CMD_ALL_SEND_CID ((uint8_t)2U) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */
-#define SDMMC_CMD_SET_REL_ADDR ((uint8_t)3U) /*!< Asks the card to publish a new relative address (RCA). */
-#define SDMMC_CMD_SET_DSR ((uint8_t)4U) /*!< Programs the DSR of all cards. */
-#define SDMMC_CMD_SDMMC_SEN_OP_COND ((uint8_t)5U) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its
- operating condition register (OCR) content in the response on the CMD line. */
-#define SDMMC_CMD_HS_SWITCH ((uint8_t)6U) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */
-#define SDMMC_CMD_SEL_DESEL_CARD ((uint8_t)7U) /*!< Selects the card by its own relative address and gets deselected by any other address */
-#define SDMMC_CMD_HS_SEND_EXT_CSD ((uint8_t)8U) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information
- and asks the card whether card supports voltage. */
-#define SDMMC_CMD_SEND_CSD ((uint8_t)9U) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */
-#define SDMMC_CMD_SEND_CID ((uint8_t)10U) /*!< Addressed card sends its card identification (CID) on the CMD line. */
-#define SDMMC_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11U) /*!< SD card doesn't support it. */
-#define SDMMC_CMD_STOP_TRANSMISSION ((uint8_t)12U) /*!< Forces the card to stop transmission. */
-#define SDMMC_CMD_SEND_STATUS ((uint8_t)13U) /*!< Addressed card sends its status register. */
-#define SDMMC_CMD_HS_BUSTEST_READ ((uint8_t)14U) /*!< Reserved */
-#define SDMMC_CMD_GO_INACTIVE_STATE ((uint8_t)15U) /*!< Sends an addressed card into the inactive state. */
-#define SDMMC_CMD_SET_BLOCKLEN ((uint8_t)16U) /*!< Sets the block length (in bytes for SDSC) for all following block commands
+#define SDMMC_CMD_GO_IDLE_STATE 0U /*!< Resets the SD memory card. */
+#define SDMMC_CMD_SEND_OP_COND 1U /*!< Sends host capacity support information and activates the card's initialization process. */
+#define SDMMC_CMD_ALL_SEND_CID 2U /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */
+#define SDMMC_CMD_SET_REL_ADDR 3U /*!< Asks the card to publish a new relative address (RCA). */
+#define SDMMC_CMD_SET_DSR 4U /*!< Programs the DSR of all cards. */
+#define SDMMC_CMD_SDMMC_SEN_OP_COND 5U /*!< Sends host capacity support information (HCS) and asks the accessed card to send its
+ operating condition register (OCR) content in the response on the CMD line. */
+#define SDMMC_CMD_HS_SWITCH 6U /*!< Checks switchable function (mode 0) and switch card function (mode 1). */
+#define SDMMC_CMD_SEL_DESEL_CARD 7U /*!< Selects the card by its own relative address and gets deselected by any other address */
+#define SDMMC_CMD_HS_SEND_EXT_CSD 8U /*!< Sends SD Memory Card interface condition, which includes host supply voltage information
+ and asks the card whether card supports voltage. */
+#define SDMMC_CMD_SEND_CSD 9U /*!< Addressed card sends its card specific data (CSD) on the CMD line. */
+#define SDMMC_CMD_SEND_CID 10U /*!< Addressed card sends its card identification (CID) on the CMD line. */
+#define SDMMC_CMD_READ_DAT_UNTIL_STOP 11U /*!< SD card doesn't support it. */
+#define SDMMC_CMD_STOP_TRANSMISSION 12U /*!< Forces the card to stop transmission. */
+#define SDMMC_CMD_SEND_STATUS 13U /*!< Addressed card sends its status register. */
+#define SDMMC_CMD_HS_BUSTEST_READ 14U /*!< Reserved */
+#define SDMMC_CMD_GO_INACTIVE_STATE 15U /*!< Sends an addressed card into the inactive state. */
+#define SDMMC_CMD_SET_BLOCKLEN 16U /*!< Sets the block length (in bytes for SDSC) for all following block commands
(read, write, lock). Default block length is fixed to 512 Bytes. Not effective
for SDHS and SDXC. */
-#define SDMMC_CMD_READ_SINGLE_BLOCK ((uint8_t)17U) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+#define SDMMC_CMD_READ_SINGLE_BLOCK 17U /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
fixed 512 bytes in case of SDHC and SDXC. */
-#define SDMMC_CMD_READ_MULT_BLOCK ((uint8_t)18U) /*!< Continuously transfers data blocks from card to host until interrupted by
+#define SDMMC_CMD_READ_MULT_BLOCK 18U /*!< Continuously transfers data blocks from card to host until interrupted by
STOP_TRANSMISSION command. */
-#define SDMMC_CMD_HS_BUSTEST_WRITE ((uint8_t)19U) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */
-#define SDMMC_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20U) /*!< Speed class control command. */
-#define SDMMC_CMD_SET_BLOCK_COUNT ((uint8_t)23U) /*!< Specify block count for CMD18 and CMD25. */
-#define SDMMC_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24U) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+#define SDMMC_CMD_HS_BUSTEST_WRITE 19U /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */
+#define SDMMC_CMD_WRITE_DAT_UNTIL_STOP 20U /*!< Speed class control command. */
+#define SDMMC_CMD_SET_BLOCK_COUNT 23U /*!< Specify block count for CMD18 and CMD25. */
+#define SDMMC_CMD_WRITE_SINGLE_BLOCK 24U /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
fixed 512 bytes in case of SDHC and SDXC. */
-#define SDMMC_CMD_WRITE_MULT_BLOCK ((uint8_t)25U) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */
-#define SDMMC_CMD_PROG_CID ((uint8_t)26U) /*!< Reserved for manufacturers. */
-#define SDMMC_CMD_PROG_CSD ((uint8_t)27U) /*!< Programming of the programmable bits of the CSD. */
-#define SDMMC_CMD_SET_WRITE_PROT ((uint8_t)28U) /*!< Sets the write protection bit of the addressed group. */
-#define SDMMC_CMD_CLR_WRITE_PROT ((uint8_t)29U) /*!< Clears the write protection bit of the addressed group. */
-#define SDMMC_CMD_SEND_WRITE_PROT ((uint8_t)30U) /*!< Asks the card to send the status of the write protection bits. */
-#define SDMMC_CMD_SD_ERASE_GRP_START ((uint8_t)32U) /*!< Sets the address of the first write block to be erased. (For SD card only). */
-#define SDMMC_CMD_SD_ERASE_GRP_END ((uint8_t)33U) /*!< Sets the address of the last write block of the continuous range to be erased. */
-#define SDMMC_CMD_ERASE_GRP_START ((uint8_t)35U) /*!< Sets the address of the first write block to be erased. Reserved for each command
+#define SDMMC_CMD_WRITE_MULT_BLOCK 25U /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */
+#define SDMMC_CMD_PROG_CID 26U /*!< Reserved for manufacturers. */
+#define SDMMC_CMD_PROG_CSD 27U /*!< Programming of the programmable bits of the CSD. */
+#define SDMMC_CMD_SET_WRITE_PROT 28U /*!< Sets the write protection bit of the addressed group. */
+#define SDMMC_CMD_CLR_WRITE_PROT 29U /*!< Clears the write protection bit of the addressed group. */
+#define SDMMC_CMD_SEND_WRITE_PROT 30U /*!< Asks the card to send the status of the write protection bits. */
+#define SDMMC_CMD_SD_ERASE_GRP_START 32U /*!< Sets the address of the first write block to be erased. (For SD card only). */
+#define SDMMC_CMD_SD_ERASE_GRP_END 33U /*!< Sets the address of the last write block of the continuous range to be erased. */
+#define SDMMC_CMD_ERASE_GRP_START 35U /*!< Sets the address of the first write block to be erased. Reserved for each command
system set by switch function command (CMD6). */
-#define SDMMC_CMD_ERASE_GRP_END ((uint8_t)36U) /*!< Sets the address of the last write block of the continuous range to be erased.
+#define SDMMC_CMD_ERASE_GRP_END 36U /*!< Sets the address of the last write block of the continuous range to be erased.
Reserved for each command system set by switch function command (CMD6). */
-#define SDMMC_CMD_ERASE ((uint8_t)38U) /*!< Reserved for SD security applications. */
-#define SDMMC_CMD_FAST_IO ((uint8_t)39U) /*!< SD card doesn't support it (Reserved). */
-#define SDMMC_CMD_GO_IRQ_STATE ((uint8_t)40U) /*!< SD card doesn't support it (Reserved). */
-#define SDMMC_CMD_LOCK_UNLOCK ((uint8_t)42U) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by
+#define SDMMC_CMD_ERASE 38U /*!< Reserved for SD security applications. */
+#define SDMMC_CMD_FAST_IO 39U /*!< SD card doesn't support it (Reserved). */
+#define SDMMC_CMD_GO_IRQ_STATE 40U /*!< SD card doesn't support it (Reserved). */
+#define SDMMC_CMD_LOCK_UNLOCK 42U /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by
the SET_BLOCK_LEN command. */
-#define SDMMC_CMD_APP_CMD ((uint8_t)55U) /*!< Indicates to the card that the next command is an application specific command rather
+#define SDMMC_CMD_APP_CMD 55U /*!< Indicates to the card that the next command is an application specific command rather
than a standard command. */
-#define SDMMC_CMD_GEN_CMD ((uint8_t)56U) /*!< Used either to transfer a data block to the card or to get a data block from the card
+#define SDMMC_CMD_GEN_CMD 56U /*!< Used either to transfer a data block to the card or to get a data block from the card
for general purpose/application specific commands. */
-#define SDMMC_CMD_NO_CMD ((uint8_t)64U) /*!< No command */
+#define SDMMC_CMD_NO_CMD 64U /*!< No command */
/**
* @brief Following commands are SD Card Specific commands.
* SDMMC_APP_CMD should be sent before sending these commands.
*/
-#define SDMMC_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6U) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus
+#define SDMMC_CMD_APP_SD_SET_BUSWIDTH 6U /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus
widths are given in SCR register. */
-#define SDMMC_CMD_SD_APP_STATUS ((uint8_t)13U) /*!< (ACMD13) Sends the SD status. */
-#define SDMMC_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22U) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with
+#define SDMMC_CMD_SD_APP_STATUS 13U /*!< (ACMD13) Sends the SD status. */
+#define SDMMC_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS 22U /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with
32bit+CRC data block. */
-#define SDMMC_CMD_SD_APP_OP_COND ((uint8_t)41U) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to
+#define SDMMC_CMD_SD_APP_OP_COND 41U /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to
send its operating condition register (OCR) content in the response on the CMD line. */
-#define SDMMC_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42U) /*!< (ACMD42) Connect/Disconnect the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card */
-#define SDMMC_CMD_SD_APP_SEND_SCR ((uint8_t)51U) /*!< Reads the SD Configuration Register (SCR). */
-#define SDMMC_CMD_SDMMC_RW_DIRECT ((uint8_t)52U) /*!< For SD I/O card only, reserved for security specification. */
-#define SDMMC_CMD_SDMMC_RW_EXTENDED ((uint8_t)53U) /*!< For SD I/O card only, reserved for security specification. */
+#define SDMMC_CMD_SD_APP_SET_CLR_CARD_DETECT 42U /*!< (ACMD42) Connect/Disconnect the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card */
+#define SDMMC_CMD_SD_APP_SEND_SCR 51U /*!< Reads the SD Configuration Register (SCR). */
+#define SDMMC_CMD_SDMMC_RW_DIRECT 52U /*!< For SD I/O card only, reserved for security specification. */
+#define SDMMC_CMD_SDMMC_RW_EXTENDED 53U /*!< For SD I/O card only, reserved for security specification. */
/**
* @brief Following commands are SD Card Specific security commands.
* SDMMC_CMD_APP_CMD should be sent before sending these commands.
*/
-#define SDMMC_CMD_SD_APP_GET_MKB ((uint8_t)43U)
-#define SDMMC_CMD_SD_APP_GET_MID ((uint8_t)44U)
-#define SDMMC_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45U)
-#define SDMMC_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46U)
-#define SDMMC_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47U)
-#define SDMMC_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48U)
-#define SDMMC_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18U)
-#define SDMMC_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25U)
-#define SDMMC_CMD_SD_APP_SECURE_ERASE ((uint8_t)38U)
-#define SDMMC_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49U)
-#define SDMMC_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48U)
+#define SDMMC_CMD_SD_APP_GET_MKB 43U
+#define SDMMC_CMD_SD_APP_GET_MID 44U
+#define SDMMC_CMD_SD_APP_SET_CER_RN1 45U
+#define SDMMC_CMD_SD_APP_GET_CER_RN2 46U
+#define SDMMC_CMD_SD_APP_SET_CER_RES2 47U
+#define SDMMC_CMD_SD_APP_GET_CER_RES1 48U
+#define SDMMC_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK 18U
+#define SDMMC_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK 25U
+#define SDMMC_CMD_SD_APP_SECURE_ERASE 38U
+#define SDMMC_CMD_SD_APP_CHANGE_SECURE_AREA 49U
+#define SDMMC_CMD_SD_APP_SECURE_WRITE_MKB 48U
/**
* @brief Masks for errors Card Status R1 (OCR Register)
*/
-#define SDMMC_OCR_ADDR_OUT_OF_RANGE ((uint32_t)0x80000000U)
-#define SDMMC_OCR_ADDR_MISALIGNED ((uint32_t)0x40000000U)
-#define SDMMC_OCR_BLOCK_LEN_ERR ((uint32_t)0x20000000U)
-#define SDMMC_OCR_ERASE_SEQ_ERR ((uint32_t)0x10000000U)
-#define SDMMC_OCR_BAD_ERASE_PARAM ((uint32_t)0x08000000U)
-#define SDMMC_OCR_WRITE_PROT_VIOLATION ((uint32_t)0x04000000U)
-#define SDMMC_OCR_LOCK_UNLOCK_FAILED ((uint32_t)0x01000000U)
-#define SDMMC_OCR_COM_CRC_FAILED ((uint32_t)0x00800000U)
-#define SDMMC_OCR_ILLEGAL_CMD ((uint32_t)0x00400000U)
-#define SDMMC_OCR_CARD_ECC_FAILED ((uint32_t)0x00200000U)
-#define SDMMC_OCR_CC_ERROR ((uint32_t)0x00100000U)
-#define SDMMC_OCR_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00080000U)
-#define SDMMC_OCR_STREAM_READ_UNDERRUN ((uint32_t)0x00040000U)
-#define SDMMC_OCR_STREAM_WRITE_OVERRUN ((uint32_t)0x00020000U)
-#define SDMMC_OCR_CID_CSD_OVERWRITE ((uint32_t)0x00010000U)
-#define SDMMC_OCR_WP_ERASE_SKIP ((uint32_t)0x00008000U)
-#define SDMMC_OCR_CARD_ECC_DISABLED ((uint32_t)0x00004000U)
-#define SDMMC_OCR_ERASE_RESET ((uint32_t)0x00002000U)
-#define SDMMC_OCR_AKE_SEQ_ERROR ((uint32_t)0x00000008U)
-#define SDMMC_OCR_ERRORBITS ((uint32_t)0xFDFFE008U)
+#define SDMMC_OCR_ADDR_OUT_OF_RANGE 0x80000000U
+#define SDMMC_OCR_ADDR_MISALIGNED 0x40000000U
+#define SDMMC_OCR_BLOCK_LEN_ERR 0x20000000U
+#define SDMMC_OCR_ERASE_SEQ_ERR 0x10000000U
+#define SDMMC_OCR_BAD_ERASE_PARAM 0x08000000U
+#define SDMMC_OCR_WRITE_PROT_VIOLATION 0x04000000U
+#define SDMMC_OCR_LOCK_UNLOCK_FAILED 0x01000000U
+#define SDMMC_OCR_COM_CRC_FAILED 0x00800000U
+#define SDMMC_OCR_ILLEGAL_CMD 0x00400000U
+#define SDMMC_OCR_CARD_ECC_FAILED 0x00200000U
+#define SDMMC_OCR_CC_ERROR 0x00100000U
+#define SDMMC_OCR_GENERAL_UNKNOWN_ERROR 0x00080000U
+#define SDMMC_OCR_STREAM_READ_UNDERRUN 0x00040000U
+#define SDMMC_OCR_STREAM_WRITE_OVERRUN 0x00020000U
+#define SDMMC_OCR_CID_CSD_OVERWRITE 0x00010000U
+#define SDMMC_OCR_WP_ERASE_SKIP 0x00008000U
+#define SDMMC_OCR_CARD_ECC_DISABLED 0x00004000U
+#define SDMMC_OCR_ERASE_RESET 0x00002000U
+#define SDMMC_OCR_AKE_SEQ_ERROR 0x00000008U
+#define SDMMC_OCR_ERRORBITS 0xFDFFE008U
/**
* @brief Masks for R6 Response
*/
-#define SDMMC_R6_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00002000U)
-#define SDMMC_R6_ILLEGAL_CMD ((uint32_t)0x00004000U)
-#define SDMMC_R6_COM_CRC_FAILED ((uint32_t)0x00008000U)
+#define SDMMC_R6_GENERAL_UNKNOWN_ERROR 0x00002000U
+#define SDMMC_R6_ILLEGAL_CMD 0x00004000U
+#define SDMMC_R6_COM_CRC_FAILED 0x00008000U
-#define SDMMC_VOLTAGE_WINDOW_SD ((uint32_t)0x80100000U)
-#define SDMMC_HIGH_CAPACITY ((uint32_t)0x40000000U)
-#define SDMMC_STD_CAPACITY ((uint32_t)0x00000000U)
-#define SDMMC_CHECK_PATTERN ((uint32_t)0x000001AAU)
-#define SD_SWITCH_1_8V_CAPACITY ((uint32_t)0x01000000U)
+#define SDMMC_VOLTAGE_WINDOW_SD 0x80100000U
+#define SDMMC_HIGH_CAPACITY 0x40000000U
+#define SDMMC_STD_CAPACITY 0x00000000U
+#define SDMMC_CHECK_PATTERN 0x000001AAU
+#define SD_SWITCH_1_8V_CAPACITY 0x01000000U
-#define SDMMC_MAX_VOLT_TRIAL ((uint32_t)0x0000FFFFU)
+#define SDMMC_MAX_VOLT_TRIAL 0x0000FFFFU
-#define SDMMC_MAX_TRIAL ((uint32_t)0x0000FFFFU)
+#define SDMMC_MAX_TRIAL 0x0000FFFFU
-#define SDMMC_ALLZERO ((uint32_t)0x00000000U)
+#define SDMMC_ALLZERO 0x00000000U
-#define SDMMC_WIDE_BUS_SUPPORT ((uint32_t)0x00040000U)
-#define SDMMC_SINGLE_BUS_SUPPORT ((uint32_t)0x00010000U)
-#define SDMMC_CARD_LOCKED ((uint32_t)0x02000000U)
+#define SDMMC_WIDE_BUS_SUPPORT 0x00040000U
+#define SDMMC_SINGLE_BUS_SUPPORT 0x00010000U
+#define SDMMC_CARD_LOCKED 0x02000000U
-#define SDMMC_DATATIMEOUT ((uint32_t)0xFFFFFFFFU)
+#ifndef SDMMC_DATATIMEOUT
+#define SDMMC_DATATIMEOUT 0xFFFFFFFFU
+#endif /* SDMMC_DATATIMEOUT */
-#define SDMMC_0TO7BITS ((uint32_t)0x000000FFU)
-#define SDMMC_8TO15BITS ((uint32_t)0x0000FF00U)
-#define SDMMC_16TO23BITS ((uint32_t)0x00FF0000U)
-#define SDMMC_24TO31BITS ((uint32_t)0xFF000000U)
-#define SDMMC_MAX_DATA_LENGTH ((uint32_t)0x01FFFFFFU)
+#define SDMMC_0TO7BITS 0x000000FFU
+#define SDMMC_8TO15BITS 0x0000FF00U
+#define SDMMC_16TO23BITS 0x00FF0000U
+#define SDMMC_24TO31BITS 0xFF000000U
+#define SDMMC_MAX_DATA_LENGTH 0x01FFFFFFU
-#define SDMMC_HALFFIFO ((uint32_t)0x00000008U)
-#define SDMMC_HALFFIFOBYTES ((uint32_t)0x00000020U)
+#define SDMMC_HALFFIFO 0x00000008U
+#define SDMMC_HALFFIFOBYTES 0x00000020U
/**
* @brief Command Class supported
*/
-#define SDIO_CCCC_ERASE ((uint32_t)0x00000020U)
+#define SDIO_CCCC_ERASE 0x00000020U
-#define SDIO_CMDTIMEOUT ((uint32_t)5000U) /* Command send and response timeout */
-#define SDIO_MAXERASETIMEOUT ((uint32_t)63000U) /* Max erase Timeout 63 s */
-#define SDIO_STOPTRANSFERTIMEOUT ((uint32_t)100000000U) /* Timeout for STOP TRANSMISSION command */
+#define SDIO_CMDTIMEOUT 5000U /* Command send and response timeout */
+#define SDIO_MAXERASETIMEOUT 63000U /* Max erase Timeout 63 s */
+#define SDIO_STOPTRANSFERTIMEOUT 100000000U /* Timeout for STOP TRANSMISSION command */
/** @defgroup SDIO_LL_Clock_Edge Clock Edge
* @{
*/
-#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000U)
+#define SDIO_CLOCK_EDGE_RISING 0x00000000U
#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE
#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \
@@ -336,7 +338,7 @@
/** @defgroup SDIO_LL_Clock_Bypass Clock Bypass
* @{
*/
-#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_CLOCK_BYPASS_DISABLE 0x00000000U
#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS
#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \
@@ -348,7 +350,7 @@
/** @defgroup SDIO_LL_Clock_Power_Save Clock Power Saving
* @{
*/
-#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_CLOCK_POWER_SAVE_DISABLE 0x00000000U
#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV
#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \
@@ -360,7 +362,7 @@
/** @defgroup SDIO_LL_Bus_Wide Bus Width
* @{
*/
-#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000U)
+#define SDIO_BUS_WIDE_1B 0x00000000U
#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0
#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1
@@ -374,7 +376,7 @@
/** @defgroup SDIO_LL_Hardware_Flow_Control Hardware Flow Control
* @{
*/
-#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE 0x00000000U
#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN
#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \
@@ -402,7 +404,7 @@
/** @defgroup SDIO_LL_Response_Type Response Type
* @{
*/
-#define SDIO_RESPONSE_NO ((uint32_t)0x00000000U)
+#define SDIO_RESPONSE_NO 0x00000000U
#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0
#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP
@@ -416,7 +418,7 @@
/** @defgroup SDIO_LL_Wait_Interrupt_State Wait Interrupt
* @{
*/
-#define SDIO_WAIT_NO ((uint32_t)0x00000000U)
+#define SDIO_WAIT_NO 0x00000000U
#define SDIO_WAIT_IT SDIO_CMD_WAITINT
#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND
@@ -430,7 +432,7 @@
/** @defgroup SDIO_LL_CPSM_State CPSM State
* @{
*/
-#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_CPSM_DISABLE 0x00000000U
#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN
#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \
@@ -442,10 +444,10 @@
/** @defgroup SDIO_LL_Response_Registers Response Register
* @{
*/
-#define SDIO_RESP1 ((uint32_t)0x00000000U)
-#define SDIO_RESP2 ((uint32_t)0x00000004U)
-#define SDIO_RESP3 ((uint32_t)0x00000008U)
-#define SDIO_RESP4 ((uint32_t)0x0000000CU)
+#define SDIO_RESP1 0x00000000U
+#define SDIO_RESP2 0x00000004U
+#define SDIO_RESP3 0x00000008U
+#define SDIO_RESP4 0x0000000CU
#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \
((RESP) == SDIO_RESP2) || \
@@ -455,7 +457,7 @@
* @}
*/
-/** @defgroup SDIO_LL_Data_Length Data Lenght
+/** @defgroup SDIO_LL_Data_Length Data Length
* @{
*/
#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFFU)
@@ -466,7 +468,7 @@
/** @defgroup SDIO_LL_Data_Block_Size Data Block Size
* @{
*/
-#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000U)
+#define SDIO_DATABLOCK_SIZE_1B 0x00000000U
#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0
#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1
#define SDIO_DATABLOCK_SIZE_8B (SDIO_DCTRL_DBLOCKSIZE_0|SDIO_DCTRL_DBLOCKSIZE_1)
@@ -504,7 +506,7 @@
/** @defgroup SDIO_LL_Transfer_Direction Transfer Direction
* @{
*/
-#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000U)
+#define SDIO_TRANSFER_DIR_TO_CARD 0x00000000U
#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR
#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \
@@ -516,7 +518,7 @@
/** @defgroup SDIO_LL_Transfer_Type Transfer Type
* @{
*/
-#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000U)
+#define SDIO_TRANSFER_MODE_BLOCK 0x00000000U
#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE
#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \
@@ -528,7 +530,7 @@
/** @defgroup SDIO_LL_DPSM_State DPSM State
* @{
*/
-#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000U)
+#define SDIO_DPSM_DISABLE 0x00000000U
#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN
#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\
@@ -540,7 +542,7 @@
/** @defgroup SDIO_LL_Read_Wait_Mode Read Wait Mode
* @{
*/
-#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000U)
+#define SDIO_READ_WAIT_MODE_DATA2 0x00000000U
#define SDIO_READ_WAIT_MODE_CLK (SDIO_DCTRL_RWMOD)
#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \
@@ -1079,6 +1081,7 @@
uint32_t SDMMC_CmdSendSCR(SDIO_TypeDef *SDIOx);
uint32_t SDMMC_CmdSendCID(SDIO_TypeDef *SDIOx);
uint32_t SDMMC_CmdSendCSD(SDIO_TypeDef *SDIOx, uint32_t Argument);
+uint32_t SDMMC_CmdSendEXTCSD(SDIO_TypeDef *SDIOx, uint32_t Argument);
uint32_t SDMMC_CmdSetRelAdd(SDIO_TypeDef *SDIOx, uint16_t *pRCA);
uint32_t SDMMC_CmdSendStatus(SDIO_TypeDef *SDIOx, uint32_t Argument);
uint32_t SDMMC_CmdStatusRegister(SDIO_TypeDef *SDIOx);
diff --git a/Inc/stm32f2xx_ll_spi.h b/Inc/stm32f2xx_ll_spi.h
index 52b4505..2912732 100644
--- a/Inc/stm32f2xx_ll_spi.h
+++ b/Inc/stm32f2xx_ll_spi.h
@@ -1075,7 +1075,7 @@
*/
__STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx)
{
- return (uint8_t)(READ_REG(SPIx->DR));
+ return (*((__IO uint8_t *)&SPIx->DR));
}
/**
diff --git a/Inc/stm32f2xx_ll_tim.h b/Inc/stm32f2xx_ll_tim.h
index 3ce9d21..9fc99ff 100644
--- a/Inc/stm32f2xx_ll_tim.h
+++ b/Inc/stm32f2xx_ll_tim.h
@@ -185,24 +185,29 @@
uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetPrescaler().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetPrescaler().*/
uint32_t CounterMode; /*!< Specifies the counter mode.
This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetCounterMode().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetCounterMode().*/
uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active
Auto-Reload Register at the next update event.
This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
- Some timer instances may support 32 bits counters. In that case this parameter must be a number between 0x0000 and 0xFFFFFFFF.
+ Some timer instances may support 32 bits counters. In that case this parameter must
+ be a number between 0x0000 and 0xFFFFFFFF.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetAutoReload().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetAutoReload().*/
uint32_t ClockDivision; /*!< Specifies the clock division.
This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetClockDivision().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetClockDivision().*/
uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
reaches zero, an update event is generated and counting restarts
@@ -210,10 +215,13 @@
This means in PWM mode that (N+1) corresponds to:
- the number of PWM periods in edge-aligned mode
- the number of half PWM period in center-aligned mode
- GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
- Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.
+ GP timers: this parameter must be a number between Min_Data = 0x00 and
+ Max_Data = 0xFF.
+ Advanced timers: this parameter must be a number between Min_Data = 0x0000 and
+ Max_Data = 0xFFFF.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetRepetitionCounter().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetRepetitionCounter().*/
} LL_TIM_InitTypeDef;
/**
@@ -224,43 +232,51 @@
uint32_t OCMode; /*!< Specifies the output mode.
This parameter can be a value of @ref TIM_LL_EC_OCMODE.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetMode().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetMode().*/
uint32_t OCState; /*!< Specifies the TIM Output Compare state.
This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
- This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state.
This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
- This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register.
This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
- This feature can be modified afterwards using unitary function LL_TIM_OC_SetCompareCHx (x=1..6).*/
+ This feature can be modified afterwards using unitary function
+ LL_TIM_OC_SetCompareCHx (x=1..6).*/
uint32_t OCPolarity; /*!< Specifies the output polarity.
This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetPolarity().*/
uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetPolarity().*/
uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetIdleState().*/
uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetIdleState().*/
} LL_TIM_OC_InitTypeDef;
/**
@@ -273,22 +289,26 @@
uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
uint32_t ICActiveInput; /*!< Specifies the input.
This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetActiveInput().*/
uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_LL_EC_ICPSC.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
uint32_t ICFilter; /*!< Specifies the input capture filter.
This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
} LL_TIM_IC_InitTypeDef;
@@ -300,47 +320,56 @@
uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4).
This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetEncoderMode().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetEncoderMode().*/
uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input.
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source
This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetActiveInput().*/
uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value.
This parameter can be a value of @ref TIM_LL_EC_ICPSC.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
uint32_t IC1Filter; /*!< Specifies the TI1 input filter.
This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input.
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source
This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetActiveInput().*/
uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value.
This parameter can be a value of @ref TIM_LL_EC_ICPSC.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
uint32_t IC2Filter; /*!< Specifies the TI2 input filter.
This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
} LL_TIM_ENCODER_InitTypeDef;
@@ -353,26 +382,31 @@
uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input.
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value.
Prescaler must be set to get a maximum counter period longer than the
time interval between 2 consecutive changes on the Hall inputs.
This parameter can be a value of @ref TIM_LL_EC_ICPSC.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
uint32_t IC1Filter; /*!< Specifies the TI1 input filter.
- This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
+ This parameter can be a value of
+ @ref TIM_LL_EC_IC_FILTER.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register.
A positive pulse (TRGO event) is generated with a programmable delay every time
a change occurs on the Hall inputs.
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetCompareCH2().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetCompareCH2().*/
} LL_TIM_HALLSENSOR_InitTypeDef;
/**
@@ -383,51 +417,63 @@
uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode.
This parameter can be a value of @ref TIM_LL_EC_OSSR
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates()
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetOffStates()
- @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */
+ @note This bit-field cannot be modified as long as LOCK level 2 has been
+ programmed. */
uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state.
This parameter can be a value of @ref TIM_LL_EC_OSSI
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates()
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetOffStates()
- @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */
+ @note This bit-field cannot be modified as long as LOCK level 2 has been
+ programmed. */
uint32_t LockLevel; /*!< Specifies the LOCK level parameters.
This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL
- @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR register
- has been written, their content is frozen until the next reset.*/
+ @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR
+ register has been written, their content is frozen until the next reset.*/
uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the
switching-on of the outputs.
This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetDeadTime()
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetDeadTime()
- @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been
+ programmed. */
uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not.
This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE
- This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK()
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK()
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity.
This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY
- This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK()
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_ConfigBRK()
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not.
This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE
- This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput()
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput()
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
} LL_TIM_BDTR_InitTypeDef;
/**
@@ -508,8 +554,8 @@
/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode
* @{
*/
-#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter is not stopped at update event */
-#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter stops counting at the next update event */
+#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */
+#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */
/**
* @}
*/
@@ -956,10 +1002,17 @@
* @retval DTG[0:7]
*/
#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \
- ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \
- (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\
- (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\
- (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\
+ ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \
+ (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \
+ (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\
+ (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \
+ (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\
+ (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \
+ (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\
0U)
/**
@@ -984,7 +1037,8 @@
((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U)
/**
- * @brief HELPER macro calculating the compare value required to achieve the required timer output compare active/inactive delay.
+ * @brief HELPER macro calculating the compare value required to achieve the required timer output compare
+ * active/inactive delay.
* @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10);
* @param __TIMCLK__ timer input clock frequency (in Hz)
* @param __PSC__ prescaler
@@ -996,7 +1050,8 @@
/ ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U))))
/**
- * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration (when the timer operates in one pulse mode).
+ * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration
+ * (when the timer operates in one pulse mode).
* @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20);
* @param __TIMCLK__ timer input clock frequency (in Hz)
* @param __PSC__ prescaler
@@ -1207,7 +1262,16 @@
*/
__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx)
{
- return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS));
+ uint32_t counter_mode;
+
+ counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS));
+
+ if (counter_mode == 0U)
+ {
+ counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR));
+ }
+
+ return counter_mode;
}
/**
@@ -1244,7 +1308,8 @@
}
/**
- * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters.
+ * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators
+ * (when supported) and the digital filters.
* @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
* whether or not the clock division feature is supported by the timer
* instance.
@@ -1262,7 +1327,8 @@
}
/**
- * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters.
+ * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time
+ * generators (when supported) and the digital filters.
* @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
* whether or not the clock division feature is supported by the timer
* instance.
@@ -1645,7 +1711,7 @@
{
uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
__IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]);
+ MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]);
}
/**
@@ -1674,7 +1740,7 @@
{
uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]);
+ return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]);
}
/**
@@ -2000,7 +2066,8 @@
}
/**
- * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of the Ocx and OCxN signals).
+ * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of
+ * the Ocx and OCxN signals).
* @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
* dead-time insertion feature is supported by a timer instance.
* @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter
@@ -2193,7 +2260,8 @@
uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
__IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]),
- ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) << SHIFT_TAB_ICxx[iChannel]);
+ ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) \
+ << SHIFT_TAB_ICxx[iChannel]);
MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]),
(Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]);
}
@@ -3237,7 +3305,8 @@
}
/**
- * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set (Capture/Compare 1 interrupt is pending).
+ * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set
+ * (Capture/Compare 1 interrupt is pending).
* @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR
* @param TIMx Timer instance
* @retval State of bit (1 or 0).
@@ -3259,7 +3328,8 @@
}
/**
- * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set (Capture/Compare 2 over-capture interrupt is pending).
+ * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set
+ * (Capture/Compare 2 over-capture interrupt is pending).
* @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR
* @param TIMx Timer instance
* @retval State of bit (1 or 0).
@@ -3281,7 +3351,8 @@
}
/**
- * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set (Capture/Compare 3 over-capture interrupt is pending).
+ * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set
+ * (Capture/Compare 3 over-capture interrupt is pending).
* @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR
* @param TIMx Timer instance
* @retval State of bit (1 or 0).
@@ -3303,7 +3374,8 @@
}
/**
- * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set (Capture/Compare 4 over-capture interrupt is pending).
+ * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set
+ * (Capture/Compare 4 over-capture interrupt is pending).
* @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR
* @param TIMx Timer instance
* @retval State of bit (1 or 0).
diff --git a/Inc/stm32f2xx_ll_usb.h b/Inc/stm32f2xx_ll_usb.h
index 3cf35fa..9168ec2 100644
--- a/Inc/stm32f2xx_ll_usb.h
+++ b/Inc/stm32f2xx_ll_usb.h
@@ -94,14 +94,15 @@
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref USB_Core_Speed */
+ This parameter can be any value of @ref PCD_Speed/HCD_Speed
+ (HCD_SPEED_xxx, HCD_SPEED_xxx) */
uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA used only for OTG HS. */
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */
uint32_t phy_itface; /*!< Select the used PHY interface.
- This parameter can be any value of @ref USB_Core_PHY */
+ This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
@@ -131,7 +132,7 @@
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t type; /*!< Endpoint type
- This parameter can be any value of @ref USB_EP_Type_ */
+ This parameter can be any value of @ref USB_LL_EP_Type */
uint8_t data_pid_start; /*!< Initial data PID
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
@@ -168,15 +169,16 @@
uint8_t ep_is_in; /*!< Endpoint direction
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
- uint8_t speed; /*!< USB Host speed.
- This parameter can be any value of @ref USB_Core_Speed_ */
+ uint8_t speed; /*!< USB Host Channel speed.
+ This parameter can be any value of @ref HCD_Device_Speed:
+ (HCD_DEVICE_SPEED_xxx) */
uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
uint8_t ep_type; /*!< Endpoint Type.
- This parameter can be any value of @ref USB_EP_Type_ */
+ This parameter can be any value of @ref USB_LL_EP_Type */
uint16_t max_packet; /*!< Endpoint Max packet size.
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
@@ -186,6 +188,8 @@
uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
+ uint32_t XferSize; /*!< OTG Channel transfer size. */
+
uint32_t xfer_len; /*!< Current transfer length. */
uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
@@ -395,12 +399,19 @@
#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx_BASE + USB_OTG_HOST_PORT_BASE)
#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)(USBx_BASE + USB_OTG_DEVICE_BASE))
-#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
-#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
+#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)(USBx_BASE\
+ + USB_OTG_IN_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
+
+#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)(USBx_BASE\
+ + USB_OTG_OUT_ENDPOINT_BASE + ((i) * USB_OTG_EP_REG_SIZE)))
+
#define USBx_DFIFO(i) *(__IO uint32_t *)(USBx_BASE + USB_OTG_FIFO_BASE + ((i) * USB_OTG_FIFO_SIZE))
#define USBx_HOST ((USB_OTG_HostTypeDef *)(USBx_BASE + USB_OTG_HOST_BASE))
-#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE + USB_OTG_HOST_CHANNEL_BASE + ((i) * USB_OTG_HOST_CHANNEL_SIZE)))
+#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)(USBx_BASE\
+ + USB_OTG_HOST_CHANNEL_BASE\
+ + ((i) * USB_OTG_HOST_CHANNEL_SIZE)))
+
#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
#define EP_ADDR_MSK 0xFU
diff --git a/README.md b/README.md
index acc1414..f0a0712 100644
--- a/README.md
+++ b/README.md
@@ -1,19 +1,21 @@
# STM32CubeF2 HAL Driver MCU Component
+
+
## Overview
-**STM32Cube** is an STMicroelectronics original initiative to ease the developers life by reducing efforts, time and cost.
+**STM32Cube** is an STMicroelectronics original initiative to ease developers' life by reducing efforts, time and cost.
-**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform, delivered for each STM32 series.
+**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform delivered for each STM32 series.
* The CMSIS modules (core and device) corresponding to the ARM(tm) core implemented in this STM32 product.
- * The STM32 HAL-LL drivers : an abstraction drivers layer, the API ensuring maximized portability across the STM32 portfolio.
- * The BSP Drivers of each evaluation or demonstration board provided by this STM32 series.
- * A consistent set of middlewares components such as RTOS, USB, FatFS, Graphics, STM32_TouchSensing_Library...
- * A full set of software projects (basic examples, applications or demonstrations) for each board provided by this STM32 series.
+ * The STM32 HAL-LL drivers, an abstraction layer offering a set of APIs ensuring maximized portability across the STM32 portfolio.
+ * The BSP drivers of each evaluation, demonstration or nucleo board provided for this STM32 series.
+ * A consistent set of middleware libraries such as RTOS, USB, FatFS, graphics, touch sensing library...
+ * A full set of software projects (basic examples, applications, and demonstrations) for each board provided for this STM32 series.
Two models of publication are proposed for the STM32Cube embedded software:
- * The monolithic **MCU Package** : all STM32Cube software modules of one STM32 series are present (Drivers, Middlewares, Projects, Utilities) in the repo (usual name **STM32Cubexx**, xx corresponding to the STM32 series)
- * The **MCU component** : progressively from November 2019, each STM32Cube software module being part of the STM32Cube MCU Package, will be delivered as an individual repo, allowing the user to select and get only the required software functions.
+ * The monolithic **MCU Package**: all STM32Cube software modules of one STM32 series are present (Drivers, Middleware, Projects, Utilities) in the repository (usual name **STM32Cubexx**, xx corresponding to the STM32 series).
+ * The **MCU component**: each STM32Cube software module being part of the STM32Cube MCU Package, is delivered as an individual repository, allowing the user to select and get only the required software functions.
## Description
@@ -38,15 +40,16 @@
HAL Driver F2 | CMSIS Device F2 | CMSIS Core | Was delivered in the full MCU package
------------- | --------------- | ---------- | -------------------------------------
-Tag v1.2.3 | Tag v2.2.2 | Tag v5.4.0_cm3 | Tag v1.8.0 (and following, if any, till next tag)
-Tag v1.2.4 | Tag v2.2.3 | Tag v5.4.0_cm3 | Tag v1.9.0 (and following, if any, till next tag)
-Tag v1.2.5 | Tag v2.2.4 | Tag v5.4.0_cm3 | Tag v1.9.1 (and following, if any, till next tag)
-Tag v1.2.6 | Tag v2.2.4 | Tag v5.4.0_cm3 | Tag v1.9.2 (and following, if any, till next tag)
+Tag v1.2.3 | Tag v2.2.2 | Tag v5.4.0_cm3 | Tag v1.8.0 (and following, if any, till HAL tag)
+Tag v1.2.4 | Tag v2.2.3 | Tag v5.4.0_cm3 | Tag v1.9.0 (and following, if any, till HAL tag)
+Tag v1.2.5 | Tag v2.2.4 | Tag v5.4.0_cm3 | Tag v1.9.1 (and following, if any, till HAL tag)
+Tag v1.2.6 | Tag v2.2.4 | Tag v5.4.0_cm3 | Tag v1.9.2 (and following, if any, till HAL tag)
+Tag v1.2.7 | Tag v2.2.5 | Tag v5.4.0_cm3 | Tag v1.9.3 (and following, if any, till HAL tag)
The full **STM32CubeF2** MCU package is available [here](https://github.com/STMicroelectronics/STM32CubeF2).
## Troubleshooting
-If you have any issue with the **Software content** of this repository, you can file an issue into the firmware repository [STM32CubeF2](https://github.com/STMicroelectronics/STM32CubeF2/issues/new/choose).
+If you have any issue with the **software content** of this repository, you can file an issue [here](https://github.com/STMicroelectronics/stm32f2xx_hal_driver/issues/new/choose).
-For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus).
\ No newline at end of file
+For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus).
diff --git a/Release_Notes.html b/Release_Notes.html
index 04e1dc7..4e12fa6 100644
--- a/Release_Notes.html
+++ b/Release_Notes.html
@@ -38,7 +38,7 @@
<div class="col-sm-12 col-lg-8">
<h1 id="update-history"><strong>Update History</strong></h1>
<div class="collapse">
-<input type="checkbox" id="collapse-section13" aria-hidden="true"> <label for="collapse-section13" aria-hidden="true"><strong>V1.2.6 / 22-October-2020</strong></label>
+<input type="checkbox" id="collapse-section1_2_7" aria-hidden="true"> <label for="collapse-section1_2_7" aria-hidden="true"><strong>V1.2.7 / 21-May-2021</strong></label>
<div>
<h2 id="main-changes">Main Changes</h2>
<ul>
@@ -46,6 +46,138 @@
</ul>
<h2 id="contents">Contents</h2>
<ul>
+<li><strong>HAL/LL ADC</strong> driver
+<ul>
+<li>Update timeout mechanism to avoid false timeout detection in case of preemption.</li>
+<li>Update LL_ADC_DeInit() API to clear missing SQR3 register.</li>
+</ul></li>
+<li><strong>HAL CAN</strong> driver
+<ul>
+<li>Update HAL_CAN_Init() API to be aligned with reference manual and to avoid timeout error:
+<ul>
+<li>Update CAN Initialization sequence to set “request initialization” bit before exit from sleep mode.</li>
+</ul></li>
+</ul></li>
+<li><strong>HAL GPIO</strong> driver
+<ul>
+<li>Update HAL_GPIO_Init() API to avoid the configuration of PUPDR register when Analog mode is selected.</li>
+</ul></li>
+<li><strong>LL FMC</strong> driver
+<ul>
+<li>Fix compilation warning with gcc -Wpedantic compiler option.</li>
+</ul></li>
+<li><strong>HAL NAND</strong> driver
+<ul>
+<li>Update implementation of “HAL_NAND_Write_Page_16b” and “HAL_NAND_Read_Page_16b” APIs implementation to fix an issue with the page calculation of 8 bits memories.</li>
+<li>Update functions HAL_NAND_Read_SpareArea_16b() and HAL_NAND_Write_SpareArea_16b() to fix column address calculation issue.</li>
+</ul></li>
+<li><strong>HAL SDMMC</strong> driver
+<ul>
+<li>Update the definition of SDMMC_DATATIMEOUT constant in order to allow the user to redefine it in his proper application.</li>
+<li>SD_FindSCR() updated to resolve an issue with FIFO blocking when reading.</li>
+<li>Update the definition of SDMMC_DATATIMEOUT constant in order to allow the user to redefine it in his proper application.</li>
+<li>Add the block size settings in the initialization functions and remove it from read/write transactions to avoid repeated and inefficient reconfiguration.</li>
+<li>Update read/write functions in DMA mode in order to force the DMA direction.</li>
+<li>Deploy new functions MMC_ReadExtCSD() and SDMMC_CmdSendEXTCSD () that read and check the sectors number of the device in order to resolve the issue of wrongly reading big memory size.</li>
+</ul></li>
+<li><strong>HAL/LL SPI</strong> driver
+<ul>
+<li>Update to fix MISRA-C 2012 Rule-13.2.</li>
+<li>Update LL_SPI_TransmitData8() API to avoid casting the result to 8 bits.</li>
+</ul></li>
+<li><strong>HAL IRDA</strong> driver
+<ul>
+<li>Fixed typos in the IRDA State definition description.</li>
+</ul></li>
+<li><strong>HAL IWDG</strong> driver
+<ul>
+<li>Updated HAL_IWDG_Init() API in order to fix HAL_GetTick() timeout vulnerability issue.</li>
+<li>Add LSI startup time in default IWDG timeout calculation (HAL_IWDG_DEFAULT_TIMEOUT).</li>
+</ul></li>
+<li><strong>HAL/LL RTC</strong> driver
+<ul>
+<li>New APIs to subtract or add one hour to the calendar in one single operation without going through the initialization procedure (Daylight Saving):
+<ul>
+<li>Add HAL_RTC_DST_Add1Hour()</li>
+<li>HAL_RTC_DST_Sub1Hour()</li>
+<li>HAL_RTC_DST_SetStoreOperation()</li>
+<li>HAL_RTC_DST_ClearStoreOperation()</li>
+<li>HAL_RTC_DST_ReadStoreOperation()</li>
+</ul></li>
+<li>Update __HAL_RTC_…(__HANDLE__, …) macros to access registers through (__HANDLE__)->Instance pointer and avoid “unused variable” warnings.</li>
+<li>Correct month management in IS_LL_RTC_MONTH() macro.</li>
+</ul></li>
+<li><strong>HAL DMA</strong> driver
+<ul>
+<li>Update HAL_DMA_IRQHandler() API to set the DMA state before unlocking access to the DMA handle.</li>
+</ul></li>
+<li><strong>HAL EXTI</strong> driver
+<ul>
+<li>Update macros using LINE as a macro parameter in order to use EXTI_LINE instead to resolve parameter conflicts with standard C usage.</li>
+<li>Update HAL_EXTI_GetConfigLine() API to set default configuration value of Trigger and GPIOSel before checking each corresponding registers.</li>
+</ul></li>
+<li><strong>HAL SMARTCARD</strong> driver
+<ul>
+<li>Fixed typos in the SMARTCARD State definition description.</li>
+</ul></li>
+<li><strong>HAL/LL TIM</strong> driver
+<ul>
+<li>Made TIM_DMADelayPulseCplt callback as a private function.</li>
+<li>Update HAL_TIMEx_OnePulseN_Start and HAL_TIMEx_OnePulseN_Stop (pooling and IT mode) to take into consideration all OutputChannel parameters.</li>
+<li>Update input capture measurement in DMA mode to avoid zero return values at high frequencies.</li>
+<li>Updated LL_TIM_GetCounterMode() API to return the correct counter mode.</li>
+<li>Corrected reversed description of TIM_LL_EC_ONEPULSEMODE One Pulse Mode.</li>
+</ul></li>
+<li><strong>HAL I2C</strong> driver
+<ul>
+<li>Update to prevent several calls of Start bit:
+<ul>
+<li>Update I2C_MemoryTransmit_TXE_BTF() API to increment EventCount.</li>
+</ul></li>
+<li>Update to avoid I2C interrupt in endless loop:
+<ul>
+<li>Update HAL_I2C_Master_Transmit_IT(), HAL_I2C_Master_Receive_IT(), HAL_I2C_Master_Transmit_DMA() and HAL_I2C_Master_Receive_DMA() APIs to unlock the I2C peripheral before generating the start.</li>
+</ul></li>
+<li>Update to use the right macro to clear I2C ADDR flag inside I2C_Slave_ADDR() API as it’s indicated in the reference manual.</li>
+<li>Update HAL_I2C_EV_IRQHandler() and I2C_MasterTransmit_BTF() APIs to fix an issue where the transfer of the first few bytes to an I2C memory fails.</li>
+</ul></li>
+<li><strong>HAL RNG</strong> driver
+<ul>
+<li>Update timeout mechanism to avoid false timeout detection in case of preemption.</li>
+</ul></li>
+<li><strong>HAL UART</strong> driver
+<ul>
+<li>Enhance reception for idle services (ReceptionToIdle):
+<ul>
+<li>Add a new field (HAL_UART_RxTypeTypeDef) to the UART_HandleTypeDef structure to identify the type of ongoing reception.</li>
+<li>Add UART Reception Event Callback registration.</li>
+</ul></li>
+<li>Add reception specific APIs specific to reception for Idle transfer in different modes:
+<ul>
+<li>HAL_UARTEx_ReceiveToIdle(): Receive an amount of data in blocking mode until either the expected number of data is received or an IDLE event occurs.</li>
+<li>HAL_UARTEx_ReceiveToIdle_IT(): Receive an amount of data in interrupt mode until either the expected number of data is received or an IDLE event occurs.</li>
+<li>HAL_UARTEx_ReceiveToIdle_DMA(): Receive an amount of data in DMA mode until either the expected number of data is received or an IDLE event occurs.</li>
+</ul></li>
+<li>Update HAL_UART_Receive(), HAL_UART_Receive_IT() and HAL_UART_Receive_DMA() APIs to support the new enhancement of ReceptionToIdle.</li>
+<li>Fix wrong comment related to RX pin configuration within the description section.</li>
+<li>Correction on UART ReceptionType management in case of ReceptionToIdle API are called from RxEvent callback.</li>
+</ul></li>
+<li><strong>LL USART</strong> driver
+<ul>
+<li>Remove useless check on maximum BRR value by removing IS_LL_USART_BRR_MAX() macro.</li>
+</ul></li>
+</ul>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section13" aria-hidden="true"> <label for="collapse-section13" aria-hidden="true"><strong>V1.2.6 / 22-October-2020</strong></label>
+<div>
+<h2 id="main-changes-1">Main Changes</h2>
+<ul>
+<li>General updates to fix known defects.</li>
+</ul>
+<h2 id="contents-1">Contents</h2>
+<ul>
<li><strong>HAL/LL I2C</strong> driver
<ul>
<li>Update to fix hardfault issue with HAL_I2C_Mem_Write_DMA() API:
@@ -59,7 +191,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section12" aria-hidden="true"> <label for="collapse-section12" aria-hidden="true"><strong>V1.2.5 / 09-September-2020</strong></label>
<div>
-<h2 id="main-changes-1">Main Changes</h2>
+<h2 id="main-changes-2">Main Changes</h2>
<ul>
<li>General updates to fix known defects and enhancements implementation.</li>
<li><strong>HAL</strong> driver
@@ -321,7 +453,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section11" aria-hidden="true"> <label for="collapse-section11" aria-hidden="true"><strong>V1.2.4 / 31-December-2019</strong></label>
<div>
-<h2 id="main-changes-2">Main Changes</h2>
+<h2 id="main-changes-3">Main Changes</h2>
<ul>
<li>General updates to fix known defects and enhancements implementation</li>
<li><strong>HAL/LL GPIO</strong> update
@@ -387,7 +519,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section10" aria-hidden="true"> <label for="collapse-section10" aria-hidden="true"><strong>V1.2.3 / 26-June-2019</strong></label>
<div>
-<h2 id="main-changes-3">Main Changes</h2>
+<h2 id="main-changes-4">Main Changes</h2>
<ul>
<li>General updates to fix known defects and enhancements implementation</li>
<li>HAL drivers clean up: remove double casting ‘uint32_t’ and ‘U’</li>
@@ -619,7 +751,7 @@
<ul>
<li>Add ErrorCode parameter in HAL RNG Handler structure</li>
<li>Add HAL_RNG_GetError() API</li>
-<li>HAL Lock/Unlock mecanism update</li>
+<li>HAL Lock/Unlock mechanism update</li>
</ul></li>
<li><strong>HAL/LL RTC</strong> update
<ul>
@@ -750,7 +882,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section9" aria-hidden="true"> <label for="collapse-section9" aria-hidden="true"><strong>V1.2.2 / 29-September-2017</strong></label>
<div>
-<h2 id="main-changes-4">Main Changes</h2>
+<h2 id="main-changes-5">Main Changes</h2>
<ul>
<li>General updates to fix known defects and enhancements implementation</li>
<li>Fix compilation warning with GCC compiler</li>
@@ -780,7 +912,7 @@
<ul>
<li>Be able to return HAL status (HAL_OK, HAL_TIMEOUT and HAL_ERROR)</li>
<li>Add checks for HSI, PLL and PLLI2S ready before modifying RCC CFGR registers</li>
-<li>Clear all interrupt falgs</li>
+<li>Clear all interrupt flags</li>
<li>Initialize systick interrupt period</li>
</ul></li>
<li>Update HAL_RCC_GetSysClockFreq() to avoid risk of rounding error which may leads to a wrong returned value.</li>
@@ -816,7 +948,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section8" aria-hidden="true"> <label for="collapse-section8" aria-hidden="true"><strong>V1.2.1 / 14-April-2017</strong></label>
<div>
-<h2 id="main-changes-5">Main Changes</h2>
+<h2 id="main-changes-6">Main Changes</h2>
<ul>
<li>General updates to fix known defects and enhancements implementation</li>
<li><strong>HAL CONF Template</strong> update
@@ -837,12 +969,12 @@
<div class="collapse">
<input type="checkbox" id="collapse-section7" aria-hidden="true"> <label for="collapse-section7" aria-hidden="true"><strong>V1.2.0 / 17-March-2017</strong></label>
<div>
-<h2 id="main-changes-6">Main Changes</h2>
+<h2 id="main-changes-7">Main Changes</h2>
<ul>
<li><strong>Add Low Layer drivers allowing performance and footprint optimization</strong>
<ul>
<li>Low Layer drivers APIs provide register level programming: require deep knowledge of peripherals described in STM32F2xx Reference Manuals</li>
-<li>Low Layer drivers are available for: ADC, Cortex, CRC, DAC, DMA, EXTI, GPIO, I2C, IWDG, PWR, RCC, RNG, RTC, SPI, TIM, USART, WWDG peripherals and additionnal Low Level Bus, System and Utilities APIs.</li>
+<li>Low Layer drivers are available for: ADC, Cortex, CRC, DAC, DMA, EXTI, GPIO, I2C, IWDG, PWR, RCC, RNG, RTC, SPI, TIM, USART, WWDG peripherals and additional Low Level Bus, System and Utilities APIs.</li>
<li>Low Layer drivers APIs are implemented as static inline function in new Inc/stm32f2xx_ll_ppp.h files for PPP peripherals, there is no configuration file and each stm32f2xx_ll_ppp.h file must be included in user code.</li>
</ul></li>
<li>General updates to fix known defects and enhancements implementation</li>
@@ -868,7 +1000,7 @@
</ul></li>
<li><strong>HAL</strong> update
<ul>
-<li>Modifiy default HAL_Delay implementation to guarantee minimum delay</li>
+<li>Modify default HAL_Delay implementation to guarantee minimum delay</li>
<li>Add HAL_GetUID API : returns the unique device identifier</li>
</ul></li>
<li><strong>HAL Cortex</strong> update
@@ -955,7 +1087,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section6" aria-hidden="true"> <label for="collapse-section6" aria-hidden="true"><strong>V1.1.3 / 29-June-2016</strong></label>
<div>
-<h2 id="main-changes-7">Main Changes</h2>
+<h2 id="main-changes-8">Main Changes</h2>
<ul>
<li>General updates to fix known defects and enhancements implementation</li>
<li>Enhance HAL delay and time base implementation:
@@ -1206,7 +1338,7 @@
<ul>
<li>Polling mode:
<ul>
-<li>Replace use of SPI_WaitOnFlagUnitTimeout() funnction by “if” statement to check on RXNE/TXE flage while transferring data</li>
+<li>Replace use of SPI_WaitOnFlagUnitTimeout() funnction by “if” statement to check on RXNE/TXE flags while transferring data</li>
<li>Use API data pointer instead of SPI handle data pointer</li>
<li>Use a Goto implementation instead of “if..else” statements</li>
</ul></li>
@@ -1309,7 +1441,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true"><strong>V1.1.2 / 11-December-2015</strong></label>
<div>
-<h2 id="main-changes-8">Main Changes</h2>
+<h2 id="main-changes-9">Main Changes</h2>
<ul>
<li><strong>HAL RCC</strong> update
<ul>
@@ -1325,7 +1457,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true"><strong>V1.1.1 / 20-November-2015</strong></label>
<div>
-<h2 id="main-changes-9">Main Changes</h2>
+<h2 id="main-changes-10">Main Changes</h2>
<ul>
<li>General updates to fix known defects and enhancements implementation</li>
<li><strong>One change done on the HAL CRYP requires an update on the application code based on HAL V1.1.0</strong>
@@ -1388,7 +1520,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true"><strong>V1.1.0 / 09-October-2015</strong></label>
<div>
-<h2 id="main-changes-10">Main Changes</h2>
+<h2 id="main-changes-11">Main Changes</h2>
<ul>
<li><strong>Maintenance release to fix known defects and enhancements implementation</strong></li>
<li><strong>Macros and literals renaming to ensure compatibles across STM32 series</strong>, backward compatibility maintained thanks to new added file stm32_hal_legacy.h under /Inc/Legacy</li>
@@ -1739,8 +1871,8 @@
<li><strong>HAL I2S</strong> update
<ul>
<li>HAL_I2S_Init(): add check on I2S instance using CMSIS macro IS_I2S_ALL_INSTANCE()</li>
-<li>HAL_I2S_IRQHandler() update for compliancy w/ C++</li>
-<li>Add use of tmpreg variable in __HAL_I2S_CLEAR_OVRFLAG() and __HAL_I2S_CLEAR_UDRFLAG() macro for compliancy with C++</li>
+<li>HAL_I2S_IRQHandler() update for compliance with C++</li>
+<li>Add use of tmpreg variable in __HAL_I2S_CLEAR_OVRFLAG() and __HAL_I2S_CLEAR_UDRFLAG() macro for compliance with C++</li>
<li>HAL_I2S_GetError(): update to return uint32_t instead of HAL_I2S_ErrorTypeDef enumeration</li>
<li>HAL_I2S_Transmit() API update to check on busy flag only for I2S slave mode</li>
</ul></li>
@@ -1750,7 +1882,7 @@
<li>Update busy flag Timeout value</li>
<li>I2C Master Receive Processes update to disable ACK before generate the STOP</li>
<li>Update to clear the POS bit in the CR1 register at the begging of all the HAL I2C processes</li>
-<li>Add use of tmpreg variable in __HAL_I2C_CLEAR_ADDRFLAG() and __HAL_I2C_CLEAR_STOPFLAG() macro for compliancy with C++</li>
+<li>Add use of tmpreg variable in __HAL_I2C_CLEAR_ADDRFLAG() and __HAL_I2C_CLEAR_STOPFLAG() macro for compliance with C++</li>
</ul></li>
<li><strong>HAL IrDA</strong> update
<ul>
@@ -1791,7 +1923,7 @@
<li>__HAL_IRDA_ONE_BIT_SAMPLE_DISABLE()</li>
</ul></li>
<li>HAL_IRDA_Transmit_IT(): update to remove the enable of the parity error interrupt</li>
-<li>Add use of tmpreg variable in __HAL_IRDA_CLEAR_PEFLAG() macro for compliancy with C++</li>
+<li>Add use of tmpreg variable in __HAL_IRDA_CLEAR_PEFLAG() macro for compliance with C++</li>
<li>HAL_IRDA_Transmit_DMA() update to follow the right procedure “Transmission using DMA” in the reference manual
<ul>
<li>Add clear the TC flag in the SR register before enabling the DMA transmit request</li>
@@ -1821,7 +1953,7 @@
<li>SPI_CRCCALCULATION_DISABLE<strong>D</strong> by SPI_CRCCALCULATION_DISABLE</li>
<li>SPI_CRCCALCULATION_ENABLE<strong>D</strong> by SPI_CRCCALCULATION_ENABLE</li>
</ul></li>
-<li>Add use of tmpreg variable in __HAL_SPI_CLEAR_MODFFLAG(), __HAL_SPI_CLEAR_FREFLAG() and __HAL_SPI_CLEAR_OVRFLAG() macros for compliancy with C++</li>
+<li>Add use of tmpreg variable in __HAL_SPI_CLEAR_MODFFLAG(), __HAL_SPI_CLEAR_FREFLAG() and __HAL_SPI_CLEAR_OVRFLAG() macros for compliance with C++</li>
<li>HAL_SPI_Transmit_DMA()/HAL_SPI_Receive_DMA()/HAL_SPI_TransmitReceive_DMA() update to unlock the process before enabling the SPI peripheral</li>
<li>HAL_SPI_Transmit_DMA() update to manage correctly the DMA TX stream in SPI Full duplex mode</li>
<li>Section SPI_Exported_Functions_Group2 update to remove duplication in *.chm UM</li>
@@ -2050,7 +2182,7 @@
<li>__HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE()</li>
<li>__HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE()</li>
</ul></li>
-<li>Add use of tmpreg variable in __HAL_SMARTCARD_CLEAR_PEFLAG() macro for compliancy with C++</li>
+<li>Add use of tmpreg variable in __HAL_SMARTCARD_CLEAR_PEFLAG() macro for compliance with C++</li>
<li>HAL_SMARTCARD_Transmit_DMA() update to follow the right procedure “Transmission using DMA” in the reference manual
<ul>
<li>Add clear the TC flag in the SR register before enabling the DMA transmit request</li>
@@ -2120,7 +2252,7 @@
<li>UART_WAKEUPMETHODE_IDLELINE by UART_WAKEUPMETHOD_IDLELINE</li>
<li>UART_WAKEUPMETHODE_ADDRESSMARK by UART_WAKEUPMETHOD_ADDRESSMARK</li>
</ul></li>
-<li>Add use of tmpreg variable in __HAL_UART_CLEAR_PEFLAG() macro for compliancy with C++</li>
+<li>Add use of tmpreg variable in __HAL_UART_CLEAR_PEFLAG() macro for compliance with C++</li>
<li>HAL_UART_Transmit_DMA() update to follow the right procedure “Transmission using DMA” in the reference manual
<ul>
<li>Add clear the TC flag in the SR register before enabling the DMA transmit request</li>
@@ -2167,7 +2299,7 @@
<li>__HAL_USART_ONE_BIT_SAMPLE_ENABLE()</li>
<li>__HAL_USART_ONE_BIT_SAMPLE_DISABLE()</li>
</ul></li>
-<li>Add use of tmpreg variable in __HAL_USART_CLEAR_PEFLAG() macro for compliancy with C++</li>
+<li>Add use of tmpreg variable in __HAL_USART_CLEAR_PEFLAG() macro for compliance with C++</li>
<li>HAL_USART_Init() fix USART baud rate configuration issue: USART baud rate is twice Higher than expected</li>
</ul></li>
<li><strong>HAL WWDG</strong> update
@@ -2218,7 +2350,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true"><strong>V1.0.1 / 25-March-2014</strong></label>
<div>
-<h2 id="main-changes-11">Main Changes</h2>
+<h2 id="main-changes-12">Main Changes</h2>
<ul>
<li>Patch release : moved macros related to RNG from hal_rcc_ex.h to hal_rcc.h as RNG is present in all versions of the STM32F2</li>
</ul>
@@ -2227,7 +2359,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true"><strong>V1.0.0 / 07-March-2014</strong></label>
<div>
-<h2 id="main-changes-12">Main Changes</h2>
+<h2 id="main-changes-13">Main Changes</h2>
<ul>
<li>First official release</li>
</ul>
diff --git a/Src/stm32f2xx_hal.c b/Src/stm32f2xx_hal.c
index c6f45ae..52b7e03 100644
--- a/Src/stm32f2xx_hal.c
+++ b/Src/stm32f2xx_hal.c
@@ -50,11 +50,11 @@
* @{
*/
/**
- * @brief STM32F2xx HAL Driver version number V1.2.6
+ * @brief STM32F2xx HAL Driver version number V1.2.7
*/
#define __STM32F2xx_HAL_VERSION_MAIN 0x01U /*!< [31:24] main version */
#define __STM32F2xx_HAL_VERSION_SUB1 0x02U /*!< [23:16] sub1 version */
-#define __STM32F2xx_HAL_VERSION_SUB2 0x06U /*!< [15:8] sub2 version */
+#define __STM32F2xx_HAL_VERSION_SUB2 0x07U /*!< [15:8] sub2 version */
#define __STM32F2xx_HAL_VERSION_RC 0x00U /*!< [7:0] release candidate */
#define __STM32F2xx_HAL_VERSION ((__STM32F2xx_HAL_VERSION_MAIN << 24U)\
|(__STM32F2xx_HAL_VERSION_SUB1 << 16U)\
diff --git a/Src/stm32f2xx_hal_adc.c b/Src/stm32f2xx_hal_adc.c
index a7c007e..1fdcca0 100644
--- a/Src/stm32f2xx_hal_adc.c
+++ b/Src/stm32f2xx_hal_adc.c
@@ -3,7 +3,7 @@
* @file stm32f2xx_hal_adc.c
* @author MCD Application Team
* @brief This file provides firmware functions to manage the following
- * functionalities of the Analog to Digital Convertor (ADC) peripheral:
+ * functionalities of the Analog to Digital Converter (ADC) peripheral:
* + Initialization and de-initialization functions
* + IO operation functions
* + State and errors functions
@@ -1554,7 +1554,7 @@
/**
* @brief Error ADC callback.
* @note In case of error due to overrun when using ADC with DMA transfer
- * (HAL ADC handle paramater "ErrorCode" to state "HAL_ADC_ERROR_OVR"):
+ * (HAL ADC handle parameter "ErrorCode" to state "HAL_ADC_ERROR_OVR"):
* - Reinitialize the DMA using function "HAL_ADC_Stop_DMA()".
* - If needed, restart a new ADC conversion using function
* "HAL_ADC_Start_DMA()"
@@ -1672,7 +1672,7 @@
/* Enable the TSVREFE channel*/
ADC->CCR |= ADC_CCR_TSVREFE;
- if((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR))
+ if(sConfig->Channel == ADC_CHANNEL_TEMPSENSOR)
{
/* Delay for temperature sensor stabilization time */
/* Compute number of CPU cycles to wait for */
diff --git a/Src/stm32f2xx_hal_adc_ex.c b/Src/stm32f2xx_hal_adc_ex.c
index b0ace7b..ed6784f 100644
--- a/Src/stm32f2xx_hal_adc_ex.c
+++ b/Src/stm32f2xx_hal_adc_ex.c
@@ -416,10 +416,14 @@
{
if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
{
- hadc->State= HAL_ADC_STATE_TIMEOUT;
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
- return HAL_TIMEOUT;
+ /* New check to avoid false timeout detection in case of preemption */
+ if(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC)))
+ {
+ hadc->State= HAL_ADC_STATE_TIMEOUT;
+ /* Process unlocked */
+ __HAL_UNLOCK(hadc);
+ return HAL_TIMEOUT;
+ }
}
}
}
diff --git a/Src/stm32f2xx_hal_can.c b/Src/stm32f2xx_hal_can.c
index 2adc37b..1c50fde 100644
--- a/Src/stm32f2xx_hal_can.c
+++ b/Src/stm32f2xx_hal_can.c
@@ -120,7 +120,7 @@
submitted (the sleep mode is not yet entered), and become
HAL_CAN_STATE_SLEEP_ACTIVE when the sleep mode is effective.
- (#) The wake-up from sleep mode can be trigged by two ways:
+ (#) The wake-up from sleep mode can be triggered by two ways:
(++) Using HAL_CAN_WakeUp(). When returning from this function,
the sleep mode is exited (if return status is HAL_OK).
(++) When a start of Rx CAN frame is detected by the CAN peripheral,
@@ -330,14 +330,14 @@
}
#endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
- /* Exit from sleep mode */
- CLEAR_BIT(hcan->Instance->MCR, CAN_MCR_SLEEP);
+ /* Request initialisation */
+ SET_BIT(hcan->Instance->MCR, CAN_MCR_INRQ);
/* Get tick */
tickstart = HAL_GetTick();
- /* Check Sleep mode leave acknowledge */
- while ((hcan->Instance->MSR & CAN_MSR_SLAK) != 0U)
+ /* Wait initialisation acknowledge */
+ while ((hcan->Instance->MSR & CAN_MSR_INAK) == 0U)
{
if ((HAL_GetTick() - tickstart) > CAN_TIMEOUT_VALUE)
{
@@ -351,14 +351,14 @@
}
}
- /* Request initialisation */
- SET_BIT(hcan->Instance->MCR, CAN_MCR_INRQ);
+ /* Exit from sleep mode */
+ CLEAR_BIT(hcan->Instance->MCR, CAN_MCR_SLEEP);
/* Get tick */
tickstart = HAL_GetTick();
- /* Wait initialisation acknowledge */
- while ((hcan->Instance->MSR & CAN_MSR_INAK) == 0U)
+ /* Check Sleep mode leave acknowledge */
+ while ((hcan->Instance->MSR & CAN_MSR_SLAK) != 0U)
{
if ((HAL_GetTick() - tickstart) > CAN_TIMEOUT_VALUE)
{
@@ -537,19 +537,19 @@
* the configuration information for CAN module
* @param CallbackID ID of the callback to be registered
* This parameter can be one of the following values:
- * @arg @ref HAL_CAN_TX_MAILBOX0_COMPLETE_CALLBACK_CB_ID Tx Mailbox 0 Complete callback ID
- * @arg @ref HAL_CAN_TX_MAILBOX1_COMPLETE_CALLBACK_CB_ID Tx Mailbox 1 Complete callback ID
- * @arg @ref HAL_CAN_TX_MAILBOX2_COMPLETE_CALLBACK_CB_ID Tx Mailbox 2 Complete callback ID
- * @arg @ref HAL_CAN_TX_MAILBOX0_ABORT_CALLBACK_CB_ID Tx Mailbox 0 Abort callback ID
- * @arg @ref HAL_CAN_TX_MAILBOX1_ABORT_CALLBACK_CB_ID Tx Mailbox 1 Abort callback ID
- * @arg @ref HAL_CAN_TX_MAILBOX2_ABORT_CALLBACK_CB_ID Tx Mailbox 2 Abort callback ID
- * @arg @ref HAL_CAN_RX_FIFO0_MSG_PENDING_CALLBACK_CB_ID Rx Fifo 0 message pending callback ID
- * @arg @ref HAL_CAN_RX_FIFO0_FULL_CALLBACK_CB_ID Rx Fifo 0 full callback ID
- * @arg @ref HAL_CAN_RX_FIFO1_MSGPENDING_CALLBACK_CB_ID Rx Fifo 1 message pending callback ID
- * @arg @ref HAL_CAN_RX_FIFO1_FULL_CALLBACK_CB_ID Rx Fifo 1 full callback ID
- * @arg @ref HAL_CAN_SLEEP_CALLBACK_CB_ID Sleep callback ID
- * @arg @ref HAL_CAN_WAKEUP_FROM_RX_MSG_CALLBACK_CB_ID Wake Up from Rx message callback ID
- * @arg @ref HAL_CAN_ERROR_CALLBACK_CB_ID Error callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX0_COMPLETE_CB_ID Tx Mailbox 0 Complete callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX1_COMPLETE_CB_ID Tx Mailbox 1 Complete callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX2_COMPLETE_CB_ID Tx Mailbox 2 Complete callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX0_ABORT_CB_ID Tx Mailbox 0 Abort callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX1_ABORT_CB_ID Tx Mailbox 1 Abort callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX2_ABORT_CB_ID Tx Mailbox 2 Abort callback ID
+ * @arg @ref HAL_CAN_RX_FIFO0_MSG_PENDING_CB_ID Rx Fifo 0 message pending callback ID
+ * @arg @ref HAL_CAN_RX_FIFO0_FULL_CB_ID Rx Fifo 0 full callback ID
+ * @arg @ref HAL_CAN_RX_FIFO1_MSG_PENDING_CB_ID Rx Fifo 1 message pending callback ID
+ * @arg @ref HAL_CAN_RX_FIFO1_FULL_CB_ID Rx Fifo 1 full callback ID
+ * @arg @ref HAL_CAN_SLEEP_CB_ID Sleep callback ID
+ * @arg @ref HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID Wake Up from Rx message callback ID
+ * @arg @ref HAL_CAN_ERROR_CB_ID Error callback ID
* @arg @ref HAL_CAN_MSPINIT_CB_ID MspInit callback ID
* @arg @ref HAL_CAN_MSPDEINIT_CB_ID MspDeInit callback ID
* @param pCallback pointer to the Callback function
@@ -680,19 +680,19 @@
* the configuration information for CAN module
* @param CallbackID ID of the callback to be unregistered
* This parameter can be one of the following values:
- * @arg @ref HAL_CAN_TX_MAILBOX0_COMPLETE_CALLBACK_CB_ID Tx Mailbox 0 Complete callback ID
- * @arg @ref HAL_CAN_TX_MAILBOX1_COMPLETE_CALLBACK_CB_ID Tx Mailbox 1 Complete callback ID
- * @arg @ref HAL_CAN_TX_MAILBOX2_COMPLETE_CALLBACK_CB_ID Tx Mailbox 2 Complete callback ID
- * @arg @ref HAL_CAN_TX_MAILBOX0_ABORT_CALLBACK_CB_ID Tx Mailbox 0 Abort callback ID
- * @arg @ref HAL_CAN_TX_MAILBOX1_ABORT_CALLBACK_CB_ID Tx Mailbox 1 Abort callback ID
- * @arg @ref HAL_CAN_TX_MAILBOX2_ABORT_CALLBACK_CB_ID Tx Mailbox 2 Abort callback ID
- * @arg @ref HAL_CAN_RX_FIFO0_MSG_PENDING_CALLBACK_CB_ID Rx Fifo 0 message pending callback ID
- * @arg @ref HAL_CAN_RX_FIFO0_FULL_CALLBACK_CB_ID Rx Fifo 0 full callback ID
- * @arg @ref HAL_CAN_RX_FIFO1_MSGPENDING_CALLBACK_CB_ID Rx Fifo 1 message pending callback ID
- * @arg @ref HAL_CAN_RX_FIFO1_FULL_CALLBACK_CB_ID Rx Fifo 1 full callback ID
- * @arg @ref HAL_CAN_SLEEP_CALLBACK_CB_ID Sleep callback ID
- * @arg @ref HAL_CAN_WAKEUP_FROM_RX_MSG_CALLBACK_CB_ID Wake Up from Rx message callback ID
- * @arg @ref HAL_CAN_ERROR_CALLBACK_CB_ID Error callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX0_COMPLETE_CB_ID Tx Mailbox 0 Complete callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX1_COMPLETE_CB_ID Tx Mailbox 1 Complete callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX2_COMPLETE_CB_ID Tx Mailbox 2 Complete callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX0_ABORT_CB_ID Tx Mailbox 0 Abort callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX1_ABORT_CB_ID Tx Mailbox 1 Abort callback ID
+ * @arg @ref HAL_CAN_TX_MAILBOX2_ABORT_CB_ID Tx Mailbox 2 Abort callback ID
+ * @arg @ref HAL_CAN_RX_FIFO0_MSG_PENDING_CB_ID Rx Fifo 0 message pending callback ID
+ * @arg @ref HAL_CAN_RX_FIFO0_FULL_CB_ID Rx Fifo 0 full callback ID
+ * @arg @ref HAL_CAN_RX_FIFO1_MSG_PENDING_CB_ID Rx Fifo 1 message pending callback ID
+ * @arg @ref HAL_CAN_RX_FIFO1_FULL_CB_ID Rx Fifo 1 full callback ID
+ * @arg @ref HAL_CAN_SLEEP_CB_ID Sleep callback ID
+ * @arg @ref HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID Wake Up from Rx message callback ID
+ * @arg @ref HAL_CAN_ERROR_CB_ID Error callback ID
* @arg @ref HAL_CAN_MSPINIT_CB_ID MspInit callback ID
* @arg @ref HAL_CAN_MSPDEINIT_CB_ID MspDeInit callback ID
* @retval HAL status
@@ -1873,7 +1873,7 @@
/* Check if message is still pending */
if ((hcan->Instance->RF0R & CAN_RF0R_FMP0) != 0U)
{
- /* Receive FIFO 0 mesage pending Callback */
+ /* Receive FIFO 0 message pending Callback */
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
/* Call registered callback*/
hcan->RxFifo0MsgPendingCallback(hcan);
@@ -1922,7 +1922,7 @@
/* Check if message is still pending */
if ((hcan->Instance->RF1R & CAN_RF1R_FMP1) != 0U)
{
- /* Receive FIFO 1 mesage pending Callback */
+ /* Receive FIFO 1 message pending Callback */
#if USE_HAL_CAN_REGISTER_CALLBACKS == 1
/* Call registered callback*/
hcan->RxFifo1MsgPendingCallback(hcan);
diff --git a/Src/stm32f2xx_hal_crc.c b/Src/stm32f2xx_hal_crc.c
index 4adabaa..bc95ea9 100644
--- a/Src/stm32f2xx_hal_crc.c
+++ b/Src/stm32f2xx_hal_crc.c
@@ -69,8 +69,8 @@
*/
/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions.
- *
+ * @brief Initialization and Configuration functions.
+ *
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
@@ -197,8 +197,8 @@
*/
/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
- * @brief management functions.
- *
+ * @brief management functions.
+ *
@verbatim
===============================================================================
##### Peripheral Control functions #####
@@ -285,8 +285,8 @@
*/
/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
- * @brief Peripheral State functions.
- *
+ * @brief Peripheral State functions.
+ *
@verbatim
===============================================================================
##### Peripheral State functions #####
diff --git a/Src/stm32f2xx_hal_dac.c b/Src/stm32f2xx_hal_dac.c
index 9f33996..f61e0c8 100644
--- a/Src/stm32f2xx_hal_dac.c
+++ b/Src/stm32f2xx_hal_dac.c
@@ -38,7 +38,7 @@
(#) External event: EXTI Line 9 (any GPIOx_PIN_9) using DAC_TRIGGER_EXT_IT9.
The used pin (GPIOx_PIN_9) must be configured in input mode.
- (#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8
+ (#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8
(DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T4_TRGO...)
(#) Software using DAC_TRIGGER_SOFTWARE
@@ -55,13 +55,6 @@
(@) Refer to the device datasheet for more details about output
impedance value with and without output buffer.
- *** DAC connect feature ***
- ===============================
- [..]
- Each DAC channel can be connected internally.
- To connect, use
- sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_ENABLE;
-
*** GPIO configurations guidelines ***
=====================
[..]
@@ -97,7 +90,7 @@
DAC_OUTx = VREF+ * DOR / 4095
(+) with DOR is the Data Output Register
[..]
- VEF+ is the input voltage reference (refer to the device datasheet)
+ VREF+ is the input voltage reference (refer to the device datasheet)
[..]
e.g. To set DAC_OUT1 to 0.7V, use
(+) Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V
@@ -105,11 +98,13 @@
*** DMA requests ***
=====================
[..]
- A DMA1 request can be generated when an external trigger (but not a software trigger)
+ A DMA request can be generated when an external trigger (but not a software trigger)
occurs if DMA1 requests are enabled using HAL_DAC_Start_DMA().
DMA1 requests are mapped as following:
- (#) DAC channel1 mapped on DMA1 Stream5 channel7
- (#) DAC channel2 mapped on DMA1 Stream6 channel7
+ (#) DAC channel1 mapped on DMA1 Stream5 channel7 which must be
+ already configured
+ (#) DAC channel2 mapped on DMA1 Stream6 channel7 which must be
+ already configured
[..]
(@) For Dual mode and specific signal (Triangle and noise) generation please
@@ -222,7 +217,7 @@
[..]
(@) You can refer to the DAC HAL driver header file for more useful macros
- @endverbatim
+@endverbatim
******************************************************************************
* @attention
*
@@ -473,6 +468,7 @@
SET_BIT(hdac->Instance->SWTRIGR, DAC_SWTRIGR_SWTRIG1);
}
}
+
else
{
/* Check if software trigger enabled */
@@ -483,6 +479,7 @@
}
}
+
/* Change DAC state */
hdac->State = HAL_DAC_STATE_READY;
@@ -526,7 +523,7 @@
* This parameter can be one of the following values:
* @arg DAC_CHANNEL_1: DAC Channel1 selected
* @arg DAC_CHANNEL_2: DAC Channel2 selected
- * @param pData The destination peripheral Buffer address.
+ * @param pData The source Buffer address.
* @param Length The length of data to be transferred from memory to DAC peripheral
* @param Alignment Specifies the data alignment for DAC channel.
* This parameter can be one of the following values:
@@ -584,6 +581,7 @@
break;
}
}
+
else
{
/* Set the DMA transfer complete callback for channel2 */
@@ -618,15 +616,17 @@
}
}
+
/* Enable the DMA Stream */
if (Channel == DAC_CHANNEL_1)
{
/* Enable the DAC DMA underrun interrupt */
__HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
- /* Enable the DMA Stream */
+ /* Enable the DMA Stream */
status = HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
}
+
else
{
/* Enable the DAC DMA underrun interrupt */
@@ -636,6 +636,7 @@
status = HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length);
}
+
/* Process Unlocked */
__HAL_UNLOCK(hdac);
@@ -665,8 +666,6 @@
*/
HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel)
{
- HAL_StatusTypeDef status;
-
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(Channel));
@@ -682,34 +681,27 @@
if (Channel == DAC_CHANNEL_1)
{
/* Disable the DMA Stream */
- status = HAL_DMA_Abort(hdac->DMA_Handle1);
+ (void)HAL_DMA_Abort(hdac->DMA_Handle1);
/* Disable the DAC DMA underrun interrupt */
__HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR1);
}
+
else /* Channel2 is used for */
{
/* Disable the DMA Stream */
- status = HAL_DMA_Abort(hdac->DMA_Handle2);
+ (void)HAL_DMA_Abort(hdac->DMA_Handle2);
/* Disable the DAC DMA underrun interrupt */
__HAL_DAC_DISABLE_IT(hdac, DAC_IT_DMAUDR2);
}
- /* Check if DMA Stream effectively disabled */
- if (status != HAL_OK)
- {
- /* Update DAC state machine to error */
- hdac->State = HAL_DAC_STATE_ERROR;
- }
- else
- {
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_READY;
- }
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
/* Return function status */
- return status;
+ return HAL_OK;
}
/**
@@ -730,7 +722,7 @@
/* Change DAC state to error state */
hdac->State = HAL_DAC_STATE_ERROR;
- /* Set DAC error code to chanel1 DMA underrun error */
+ /* Set DAC error code to channel1 DMA underrun error */
SET_BIT(hdac->ErrorCode, HAL_DAC_ERROR_DMAUNDERRUNCH1);
/* Clear the underrun flag */
@@ -748,6 +740,7 @@
}
}
+
if (__HAL_DAC_GET_IT_SOURCE(hdac, DAC_IT_DMAUDR2))
{
/* Check underrun flag of DAC channel 2 */
@@ -773,6 +766,7 @@
#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
}
}
+
}
/**
@@ -793,7 +787,7 @@
*/
HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data)
{
- __IO uint32_t tmp = 0;
+ __IO uint32_t tmp = 0UL;
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(Channel));
@@ -805,11 +799,13 @@
{
tmp += DAC_DHR12R1_ALIGNMENT(Alignment);
}
+
else
{
tmp += DAC_DHR12R2_ALIGNMENT(Alignment);
}
+
/* Set the DAC channel selected data holding register */
*(__IO uint32_t *) tmp = Data;
@@ -912,18 +908,23 @@
*/
uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel)
{
+ uint32_t result;
+
/* Check the parameters */
assert_param(IS_DAC_CHANNEL(Channel));
- /* Returns the DAC channel data output register value */
if (Channel == DAC_CHANNEL_1)
{
- return hdac->Instance->DOR1;
+ result = hdac->Instance->DOR1;
}
+
else
{
- return hdac->Instance->DOR2;
+ result = hdac->Instance->DOR2;
}
+
+ /* Returns the DAC channel data output register value */
+ return result;
}
/**
@@ -959,7 +960,7 @@
tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << (Channel & 0x10UL));
/* Configure for the selected DAC channel: buffer output, trigger */
/* Set TSELx and TENx bits according to DAC_Trigger value */
- /* Set BOFFx bit according to DAC_OutputBuffer value */
+ /* Set BOFFx bit according to DAC_OutputBuffer value */
tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer);
/* Calculate CR register value depending on DAC_Channel */
tmpreg1 |= tmpreg2 << (Channel & 0x10UL);
@@ -967,8 +968,6 @@
hdac->Instance->CR = tmpreg1;
/* Disable wave generation */
CLEAR_BIT(hdac->Instance->CR, (DAC_CR_WAVE1 << (Channel & 0x10UL)));
- /* Disable wave generation */
- hdac->Instance->CR &= ~(DAC_CR_WAVE1 << (Channel & 0x10UL));
/* Change DAC state */
hdac->State = HAL_DAC_STATE_READY;
@@ -1092,6 +1091,7 @@
case HAL_DAC_CH1_UNDERRUN_CB_ID :
hdac->DMAUnderrunCallbackCh1 = pCallback;
break;
+
case HAL_DAC_CH2_COMPLETE_CB_ID :
hdac->ConvCpltCallbackCh2 = pCallback;
break;
@@ -1104,6 +1104,7 @@
case HAL_DAC_CH2_UNDERRUN_CB_ID :
hdac->DMAUnderrunCallbackCh2 = pCallback;
break;
+
case HAL_DAC_MSPINIT_CB_ID :
hdac->MspInitCallback = pCallback;
break;
@@ -1155,7 +1156,7 @@
* @param hdac DAC handle
* @param CallbackID ID of the callback to be unregistered
* This parameter can be one of the following values:
- * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 tranfer Complete Callback ID
+ * @arg @ref HAL_DAC_CH1_COMPLETE_CB_ID DAC CH1 transfer Complete Callback ID
* @arg @ref HAL_DAC_CH1_HALF_COMPLETE_CB_ID DAC CH1 Half Complete Callback ID
* @arg @ref HAL_DAC_CH1_ERROR_ID DAC CH1 Error Callback ID
* @arg @ref HAL_DAC_CH1_UNDERRUN_CB_ID DAC CH1 UnderRun Callback ID
@@ -1191,6 +1192,7 @@
case HAL_DAC_CH1_UNDERRUN_CB_ID :
hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1;
break;
+
case HAL_DAC_CH2_COMPLETE_CB_ID :
hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2;
break;
@@ -1203,6 +1205,7 @@
case HAL_DAC_CH2_UNDERRUN_CB_ID :
hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2;
break;
+
case HAL_DAC_MSPINIT_CB_ID :
hdac->MspInitCallback = HAL_DAC_MspInit;
break;
@@ -1214,10 +1217,12 @@
hdac->ConvHalfCpltCallbackCh1 = HAL_DAC_ConvHalfCpltCallbackCh1;
hdac->ErrorCallbackCh1 = HAL_DAC_ErrorCallbackCh1;
hdac->DMAUnderrunCallbackCh1 = HAL_DAC_DMAUnderrunCallbackCh1;
+
hdac->ConvCpltCallbackCh2 = HAL_DACEx_ConvCpltCallbackCh2;
hdac->ConvHalfCpltCallbackCh2 = HAL_DACEx_ConvHalfCpltCallbackCh2;
hdac->ErrorCallbackCh2 = HAL_DACEx_ErrorCallbackCh2;
hdac->DMAUnderrunCallbackCh2 = HAL_DACEx_DMAUnderrunCallbackCh2;
+
hdac->MspInitCallback = HAL_DAC_MspInit;
hdac->MspDeInitCallback = HAL_DAC_MspDeInit;
break;
diff --git a/Src/stm32f2xx_hal_dac_ex.c b/Src/stm32f2xx_hal_dac_ex.c
index c200256..d81dfe3 100644
--- a/Src/stm32f2xx_hal_dac_ex.c
+++ b/Src/stm32f2xx_hal_dac_ex.c
@@ -2,7 +2,7 @@
******************************************************************************
* @file stm32f2xx_hal_dac_ex.c
* @author MCD Application Team
- * @brief DAC HAL module driver.
+ * @brief Extended DAC HAL module driver.
* This file provides firmware functions to manage the extended
* functionalities of the DAC peripheral.
*
@@ -12,8 +12,10 @@
##### How to use this driver #####
==============================================================================
[..]
+
*** Dual mode IO operation ***
==============================
+ [..]
(+) When Dual mode is enabled (i.e. DAC Channel1 and Channel2 are used simultaneously) :
Use HAL_DACEx_DualGetValue() to get digital data to be converted and use
HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in
@@ -21,6 +23,7 @@
*** Signal generation operation ***
===================================
+ [..]
(+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal.
(+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal.
@@ -86,6 +89,71 @@
* @{
*/
+
+/**
+ * @brief Enables DAC and starts conversion of both channels.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DACEx_DualStart(DAC_HandleTypeDef *hdac)
+{
+ uint32_t tmp_swtrig = 0UL;
+
+
+ /* Process locked */
+ __HAL_LOCK(hdac);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_BUSY;
+
+ /* Enable the Peripheral */
+ __HAL_DAC_ENABLE(hdac, DAC_CHANNEL_1);
+ __HAL_DAC_ENABLE(hdac, DAC_CHANNEL_2);
+
+ /* Check if software trigger enabled */
+ if ((hdac->Instance->CR & (DAC_CR_TEN1 | DAC_CR_TSEL1)) == DAC_TRIGGER_SOFTWARE)
+ {
+ tmp_swtrig |= DAC_SWTRIGR_SWTRIG1;
+ }
+ if ((hdac->Instance->CR & (DAC_CR_TEN2 | DAC_CR_TSEL2)) == (DAC_TRIGGER_SOFTWARE << (DAC_CHANNEL_2 & 0x10UL)))
+ {
+ tmp_swtrig |= DAC_SWTRIGR_SWTRIG2;
+ }
+ /* Enable the selected DAC software conversion*/
+ SET_BIT(hdac->Instance->SWTRIGR, tmp_swtrig);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Process unlocked */
+ __HAL_UNLOCK(hdac);
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables DAC and stop conversion of both channels.
+ * @param hdac pointer to a DAC_HandleTypeDef structure that contains
+ * the configuration information for the specified DAC.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_DACEx_DualStop(DAC_HandleTypeDef *hdac)
+{
+
+ /* Disable the Peripheral */
+ __HAL_DAC_DISABLE(hdac, DAC_CHANNEL_1);
+ __HAL_DAC_DISABLE(hdac, DAC_CHANNEL_2);
+
+ /* Change DAC state */
+ hdac->State = HAL_DAC_STATE_READY;
+
+ /* Return function status */
+ return HAL_OK;
+}
+
+
/**
* @brief Enable or disable the selected DAC channel wave generation.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
@@ -123,7 +191,8 @@
hdac->State = HAL_DAC_STATE_BUSY;
/* Enable the triangle wave generation for the selected DAC channel */
- MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), (DAC_CR_WAVE1_1 | Amplitude) << (Channel & 0x10UL));
+ MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL),
+ (DAC_CR_WAVE1_1 | Amplitude) << (Channel & 0x10UL));
/* Change DAC state */
hdac->State = HAL_DAC_STATE_READY;
@@ -172,7 +241,8 @@
hdac->State = HAL_DAC_STATE_BUSY;
/* Enable the noise wave generation for the selected DAC channel */
- MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL), (DAC_CR_WAVE1_0 | Amplitude) << (Channel & 0x10UL));
+ MODIFY_REG(hdac->Instance->CR, ((DAC_CR_WAVE1) | (DAC_CR_MAMP1)) << (Channel & 0x10UL),
+ (DAC_CR_WAVE1_0 | Amplitude) << (Channel & 0x10UL));
/* Change DAC state */
hdac->State = HAL_DAC_STATE_READY;
@@ -184,6 +254,7 @@
return HAL_OK;
}
+
/**
* @brief Set the specified data holding register value for dual DAC channel.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
@@ -293,6 +364,8 @@
*/
}
+
+
/**
* @}
*/
@@ -311,6 +384,7 @@
* @{
*/
+
/**
* @brief Return the last data output value of the selected DAC channel.
* @param hdac pointer to a DAC_HandleTypeDef structure that contains
@@ -319,20 +393,20 @@
*/
uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac)
{
- uint32_t tmp = 0U;
+ uint32_t tmp = 0UL;
tmp |= hdac->Instance->DOR1;
- tmp |= hdac->Instance->DOR2 << 16U;
+ tmp |= hdac->Instance->DOR2 << 16UL;
/* Returns the DAC channel data output register value */
return tmp;
}
+
/**
* @}
*/
-
/**
* @}
*/
@@ -340,9 +414,10 @@
/* Private functions ---------------------------------------------------------*/
/** @defgroup DACEx_Private_Functions DACEx private functions
* @brief Extended private functions
- * @{
+ * @{
*/
+
/**
* @brief DMA conversion complete callback.
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
@@ -401,6 +476,7 @@
hdac->State = HAL_DAC_STATE_READY;
}
+
/**
* @}
*/
diff --git a/Src/stm32f2xx_hal_dma.c b/Src/stm32f2xx_hal_dma.c
index 97dd49c..0628248 100644
--- a/Src/stm32f2xx_hal_dma.c
+++ b/Src/stm32f2xx_hal_dma.c
@@ -200,12 +200,13 @@
assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst));
}
- /* Allocate lock resource */
- __HAL_UNLOCK(hdma);
/* Change DMA peripheral state */
hdma->State = HAL_DMA_STATE_BUSY;
-
+
+ /* Allocate lock resource */
+ __HAL_UNLOCK(hdma);
+
/* Disable the peripheral */
__HAL_DMA_DISABLE(hdma);
@@ -550,12 +551,12 @@
/* Update error code */
hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_TIMEOUT;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
return HAL_TIMEOUT;
}
}
@@ -563,11 +564,11 @@
/* Clear all interrupt flags at correct offset within the register */
regs->IFCR = 0x3FU << hdma->StreamIndex;
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
/* Change the DMA state*/
hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
}
return HAL_OK;
}
@@ -602,7 +603,7 @@
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param CompleteLevel Specifies the DMA level complete.
- * @note The polling mode is kept in this version for legacy. it is recommanded to use the IT model instead.
+ * @note The polling mode is kept in this version for legacy. it is recommended to use the IT model instead.
* This model could be used for debug purpose.
* @note The HAL_DMA_PollForTransfer API cannot be used in circular and double buffering mode (automatic circular mode).
* @param Timeout Timeout duration.
@@ -658,12 +659,12 @@
/* Update error code */
hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT;
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
return HAL_TIMEOUT;
}
}
@@ -708,11 +709,11 @@
/* Clear the half transfer and transfer complete flags */
regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
/* Change the DMA state */
hdma->State= HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
return HAL_ERROR;
}
@@ -724,10 +725,11 @@
/* Clear the half transfer and transfer complete flags */
regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
+ hdma->State = HAL_DMA_STATE_READY;
+
/* Process Unlocked */
__HAL_UNLOCK(hdma);
- hdma->State = HAL_DMA_STATE_READY;
}
else
{
@@ -863,12 +865,12 @@
/* Clear all interrupt flags at correct offset within the register */
regs->IFCR = 0x3FU << hdma->StreamIndex;
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
+
if(hdma->XferAbortCallback != NULL)
{
hdma->XferAbortCallback(hdma);
@@ -905,11 +907,11 @@
/* Disable the transfer complete interrupt */
hdma->Instance->CR &= ~(DMA_IT_TC);
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
}
if(hdma->XferCpltCallback != NULL)
@@ -940,11 +942,11 @@
}
while((hdma->Instance->CR & DMA_SxCR_EN) != RESET);
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
/* Change the DMA state */
hdma->State = HAL_DMA_STATE_READY;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hdma);
}
if(hdma->XferErrorCallback != NULL)
@@ -959,7 +961,7 @@
* @brief Register callbacks
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
- * @param CallbackID User Callback identifer
+ * @param CallbackID User Callback identifier
* a DMA_HandleTypeDef structure as parameter.
* @param pCallback pointer to private callbacsk function which has pointer to
* a DMA_HandleTypeDef structure as parameter.
@@ -1021,7 +1023,7 @@
* @brief UnRegister callbacks
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
- * @param CallbackID User Callback identifer
+ * @param CallbackID User Callback identifier
* a HAL_DMA_CallbackIDTypeDef ENUM as parameter.
* @retval HAL status
*/
diff --git a/Src/stm32f2xx_hal_eth.c b/Src/stm32f2xx_hal_eth.c
index 9a5c722..ec96630 100644
--- a/Src/stm32f2xx_hal_eth.c
+++ b/Src/stm32f2xx_hal_eth.c
@@ -541,7 +541,7 @@
/* Fill each DMATxDesc descriptor with the right values */
for (i = 0U; i < TxBuffCount; i++)
{
- /* Get the pointer on the ith member of the Tx Desc list */
+ /* Get the pointer on the member (i) of the Tx Desc list */
dmatxdesc = DMATxDescTab + i;
/* Set Second Address Chained bit */
@@ -608,7 +608,7 @@
/* Fill each DMARxDesc descriptor with the right values */
for (i = 0U; i < RxBuffCount; i++)
{
- /* Get the pointer on the ith member of the Rx Desc list */
+ /* Get the pointer on the member (i) of the Rx Desc list */
DMARxDesc = DMARxDescTab + i;
/* Set Own bit of the Rx descriptor Status */
diff --git a/Src/stm32f2xx_hal_exti.c b/Src/stm32f2xx_hal_exti.c
index 8ff7f4a..5e58d44 100644
--- a/Src/stm32f2xx_hal_exti.c
+++ b/Src/stm32f2xx_hal_exti.c
@@ -276,6 +276,10 @@
pExtiConfig->Mode |= EXTI_MODE_EVENT;
}
+ /* Get default Trigger and GPIOSel configuration */
+ pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
+ pExtiConfig->GPIOSel = 0x00u;
+
/* 2] Get trigger for configurable lines : rising */
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
{
@@ -284,10 +288,6 @@
{
pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
}
- else
- {
- pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
- }
/* Get falling configuration */
/* Check if configuration of selected line is enable */
@@ -304,16 +304,6 @@
regval = SYSCFG->EXTICR[linepos >> 2u];
pExtiConfig->GPIOSel = ((regval << (SYSCFG_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24);
}
- else
- {
- pExtiConfig->GPIOSel = 0x00u;
- }
- }
- else
- {
- /* No Trigger selected */
- pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
- pExtiConfig->GPIOSel = 0x00u;
}
return HAL_OK;
diff --git a/Src/stm32f2xx_hal_gpio.c b/Src/stm32f2xx_hal_gpio.c
index 7d9fe8a..997758b 100644
--- a/Src/stm32f2xx_hal_gpio.c
+++ b/Src/stm32f2xx_hal_gpio.c
@@ -130,14 +130,6 @@
/** @addtogroup GPIO_Private_Constants GPIO Private Constants
* @{
*/
-#define GPIO_MODE 0x00000003U
-#define EXTI_MODE 0x10000000U
-#define GPIO_MODE_IT 0x00010000U
-#define GPIO_MODE_EVT 0x00020000U
-#define RISING_EDGE 0x00100000U
-#define FALLING_EDGE 0x00200000U
-#define GPIO_OUTPUT_TYPE 0x00000010U
-
#define GPIO_NUMBER 16U
/**
* @}
@@ -184,7 +176,6 @@
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
- assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
/* Configure the port pins */
while (((GPIO_Init->Pin) >> position) != 0x00u)
@@ -195,8 +186,7 @@
if (iocurrent != 0x00u)
{
/* In case of Output or Alternate function mode selection */
- if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
- (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ if(((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF))
{
/* Check the Speed parameter */
assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
@@ -209,19 +199,24 @@
/* Configure the IO Output Type */
temp = GPIOx->OTYPER;
temp &= ~(GPIO_OTYPER_OT0 << position) ;
- temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4u) << position);
+ temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position);
GPIOx->OTYPER = temp;
}
+ if((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG)
+ {
+ /* Check the Pull parameter */
+ assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
- /* Activate the Pull-up or Pull down resistor for the current IO */
- temp = GPIOx->PUPDR;
- temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2u));
- temp |= ((GPIO_Init->Pull) << (position * 2u));
- GPIOx->PUPDR = temp;
+ /* Activate the Pull-up or Pull down resistor for the current IO */
+ temp = GPIOx->PUPDR;
+ temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2u));
+ temp |= ((GPIO_Init->Pull) << (position * 2u));
+ GPIOx->PUPDR = temp;
+ }
/*--------------------- GPIO Mode Configuration ------------------------*/
/* In case of Alternate function mode selection */
- if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ if((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)
{
/* Check the Alternate function parameters */
assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
@@ -242,7 +237,7 @@
/*--------------------- EXTI Mode Configuration ------------------------*/
/* Configure the External Interrupt or event for the current IO */
- if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+ if((GPIO_Init->Mode & EXTI_MODE) != 0x00u)
{
/* Enable SYSCFG Clock */
__HAL_RCC_SYSCFG_CLK_ENABLE();
@@ -255,7 +250,7 @@
/* Clear EXTI line configuration */
temp = EXTI->IMR;
temp &= ~(iocurrent);
- if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+ if((GPIO_Init->Mode & EXTI_IT) != 0x00u)
{
temp |= iocurrent;
}
@@ -263,7 +258,7 @@
temp = EXTI->EMR;
temp &= ~(iocurrent);
- if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+ if((GPIO_Init->Mode & EXTI_EVT) != 0x00u)
{
temp |= iocurrent;
}
@@ -272,7 +267,7 @@
/* Clear Rising Falling edge configuration */
temp = EXTI->RTSR;
temp &= ~(iocurrent);
- if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+ if((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u)
{
temp |= iocurrent;
}
@@ -280,7 +275,7 @@
temp = EXTI->FTSR;
temp &= ~(iocurrent);
- if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+ if((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u)
{
temp |= iocurrent;
}
@@ -444,7 +439,7 @@
/* Check the parameters */
assert_param(IS_GPIO_PIN(GPIO_Pin));
- /* get current Ouput Data Register value */
+ /* get current Output Data Register value */
odr = GPIOx->ODR;
/* Set selected pins that were at low level, and reset ones that were high */
diff --git a/Src/stm32f2xx_hal_hcd.c b/Src/stm32f2xx_hal_hcd.c
index 9728b25..c4efb24 100644
--- a/Src/stm32f2xx_hal_hcd.c
+++ b/Src/stm32f2xx_hal_hcd.c
@@ -61,7 +61,6 @@
*/
#ifdef HAL_HCD_MODULE_ENABLED
-
#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
/** @defgroup HCD HCD
@@ -185,9 +184,9 @@
* This parameter can be a value from 0 to 255
* @param speed Current device speed.
* This parameter can be one of these values:
- * HCD_SPEED_HIGH: High speed mode,
- * HCD_SPEED_FULL: Full speed mode,
- * HCD_SPEED_LOW: Low speed mode
+ * HCD_DEVICE_SPEED_HIGH: High speed mode,
+ * HCD_DEVICE_SPEED_FULL: Full speed mode,
+ * HCD_DEVICE_SPEED_LOW: Low speed mode
* @param ep_type Endpoint Type.
* This parameter can be one of these values:
* EP_TYPE_CTRL: Control type,
@@ -495,7 +494,8 @@
{
USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
uint32_t USBx_BASE = (uint32_t)USBx;
- uint32_t i, interrupt;
+ uint32_t i;
+ uint32_t interrupt;
/* Ensure that we are in device mode */
if (USB_GetMode(hhcd->Instance) == USB_OTG_MODE_HOST)
@@ -566,6 +566,16 @@
__HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF);
}
+ /* Handle Rx Queue Level Interrupts */
+ if ((__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL)) != 0U)
+ {
+ USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+
+ HCD_RXQLVL_IRQHandler(hhcd);
+
+ USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+ }
+
/* Handle Host channel Interrupt */
if (__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT))
{
@@ -586,16 +596,6 @@
}
__HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT);
}
-
- /* Handle Rx Queue Level Interrupts */
- if ((__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL)) != 0U)
- {
- USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
-
- HCD_RXQLVL_IRQHandler(hhcd);
-
- USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
- }
}
}
@@ -961,7 +961,8 @@
/**
* @brief Unregister the USB HCD Host Channel Notify URB Change Callback
- * USB HCD Host Channel Notify URB Change Callback is redirected to the weak HAL_HCD_HC_NotifyURBChange_Callback() predefined callback
+ * USB HCD Host Channel Notify URB Change Callback is redirected
+ * to the weak HAL_HCD_HC_NotifyURBChange_Callback() predefined callback
* @param hhcd HCD handle
* @retval HAL status
*/
@@ -1019,8 +1020,11 @@
HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd)
{
__HAL_LOCK(hhcd);
- __HAL_HCD_ENABLE(hhcd);
+ /* Enable port power */
(void)USB_DriveVbus(hhcd->Instance, 1U);
+
+ /* Enable global interrupt */
+ __HAL_HCD_ENABLE(hhcd);
__HAL_UNLOCK(hhcd);
return HAL_OK;
@@ -1207,10 +1211,17 @@
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_DTERR) == USB_OTG_HCINT_DTERR)
{
__HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
- (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
- __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK);
hhcd->hc[ch_num].state = HC_DATATGLERR;
+ __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NAK);
__HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_DTERR);
+ (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+ }
+ else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR)
+ {
+ __HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
+ hhcd->hc[ch_num].state = HC_XACTERR;
+ (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+ __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR);
}
else
{
@@ -1227,7 +1238,7 @@
{
if (hhcd->Init.dma_enable != 0U)
{
- hhcd->hc[ch_num].xfer_count = hhcd->hc[ch_num].xfer_len - \
+ hhcd->hc[ch_num].xfer_count = hhcd->hc[ch_num].XferSize - \
(USBx_HC(ch_num)->HCTSIZ & USB_OTG_HCTSIZ_XFRSIZ);
}
@@ -1268,8 +1279,18 @@
{
/* ... */
}
- hhcd->hc[ch_num].toggle_in ^= 1U;
+ if (hhcd->Init.dma_enable == 1U)
+ {
+ if (((hhcd->hc[ch_num].XferSize / hhcd->hc[ch_num].max_packet) & 1U) != 0U)
+ {
+ hhcd->hc[ch_num].toggle_in ^= 1U;
+ }
+ }
+ else
+ {
+ hhcd->hc[ch_num].toggle_in ^= 1U;
+ }
}
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_CHH) == USB_OTG_HCINT_CHH)
{
@@ -1277,17 +1298,17 @@
if (hhcd->hc[ch_num].state == HC_XFRC)
{
- hhcd->hc[ch_num].urb_state = URB_DONE;
+ hhcd->hc[ch_num].urb_state = URB_DONE;
}
else if (hhcd->hc[ch_num].state == HC_STALL)
{
- hhcd->hc[ch_num].urb_state = URB_STALL;
+ hhcd->hc[ch_num].urb_state = URB_STALL;
}
else if ((hhcd->hc[ch_num].state == HC_XACTERR) ||
(hhcd->hc[ch_num].state == HC_DATATGLERR))
{
hhcd->hc[ch_num].ErrCnt++;
- if (hhcd->hc[ch_num].ErrCnt > 3U)
+ if (hhcd->hc[ch_num].ErrCnt > 2U)
{
hhcd->hc[ch_num].ErrCnt = 0U;
hhcd->hc[ch_num].urb_state = URB_ERROR;
@@ -1295,18 +1316,19 @@
else
{
hhcd->hc[ch_num].urb_state = URB_NOTREADY;
- }
- /* re-activate the channel */
- tmpreg = USBx_HC(ch_num)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(ch_num)->HCCHAR = tmpreg;
+ /* re-activate the channel */
+ tmpreg = USBx_HC(ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(ch_num)->HCCHAR = tmpreg;
+ }
}
else if (hhcd->hc[ch_num].state == HC_NAK)
{
hhcd->hc[ch_num].urb_state = URB_NOTREADY;
- /* re-activate the channel */
+
+ /* re-activate the channel */
tmpreg = USBx_HC(ch_num)->HCCHAR;
tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
tmpreg |= USB_OTG_HCCHAR_CHENA;
@@ -1324,14 +1346,6 @@
__HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_CHH);
HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num, hhcd->hc[ch_num].urb_state);
}
- else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR)
- {
- __HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
- hhcd->hc[ch_num].ErrCnt++;
- hhcd->hc[ch_num].state = HC_XACTERR;
- (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
- __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR);
- }
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NAK) == USB_OTG_HCINT_NAK)
{
if (hhcd->hc[ch_num].ep_type == EP_TYPE_INTR)
@@ -1377,6 +1391,7 @@
uint32_t USBx_BASE = (uint32_t)USBx;
uint32_t ch_num = (uint32_t)chnum;
uint32_t tmpreg;
+ uint32_t num_packets;
if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_AHBERR) == USB_OTG_HCINT_AHBERR)
{
@@ -1395,15 +1410,6 @@
(void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
}
}
- else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NYET) == USB_OTG_HCINT_NYET)
- {
- hhcd->hc[ch_num].state = HC_NYET;
- hhcd->hc[ch_num].do_ping = 1U;
- hhcd->hc[ch_num].ErrCnt = 0U;
- __HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
- (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
- __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET);
- }
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_FRMOR) == USB_OTG_HCINT_FRMOR)
{
__HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
@@ -1413,11 +1419,27 @@
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_XFRC) == USB_OTG_HCINT_XFRC)
{
hhcd->hc[ch_num].ErrCnt = 0U;
+
+ /* transaction completed with NYET state, update do ping state */
+ if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NYET) == USB_OTG_HCINT_NYET)
+ {
+ hhcd->hc[ch_num].do_ping = 1U;
+ __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET);
+ }
__HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
(void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
__HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_XFRC);
hhcd->hc[ch_num].state = HC_XFRC;
}
+ else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_NYET) == USB_OTG_HCINT_NYET)
+ {
+ hhcd->hc[ch_num].state = HC_NYET;
+ hhcd->hc[ch_num].do_ping = 1U;
+ hhcd->hc[ch_num].ErrCnt = 0U;
+ __HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
+ (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+ __HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_NYET);
+ }
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_STALL) == USB_OTG_HCINT_STALL)
{
__HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_STALL);
@@ -1432,7 +1454,7 @@
if (hhcd->hc[ch_num].do_ping == 0U)
{
- if (hhcd->hc[ch_num].speed == HCD_SPEED_HIGH)
+ if (hhcd->hc[ch_num].speed == HCD_DEVICE_SPEED_HIGH)
{
hhcd->hc[ch_num].do_ping = 1U;
}
@@ -1444,9 +1466,27 @@
}
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_TXERR) == USB_OTG_HCINT_TXERR)
{
- __HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
- (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
- hhcd->hc[ch_num].state = HC_XACTERR;
+ if (hhcd->Init.dma_enable == 0U)
+ {
+ hhcd->hc[ch_num].state = HC_XACTERR;
+ __HAL_HCD_UNMASK_HALT_HC_INT(ch_num);
+ (void)USB_HC_Halt(hhcd->Instance, (uint8_t)ch_num);
+ }
+ else
+ {
+ hhcd->hc[ch_num].ErrCnt++;
+ if (hhcd->hc[ch_num].ErrCnt > 2U)
+ {
+ hhcd->hc[ch_num].ErrCnt = 0U;
+ hhcd->hc[ch_num].urb_state = URB_ERROR;
+ HAL_HCD_HC_NotifyURBChange_Callback(hhcd, (uint8_t)ch_num,
+ hhcd->hc[ch_num].urb_state);
+ }
+ else
+ {
+ hhcd->hc[ch_num].urb_state = URB_NOTREADY;
+ }
+ }
__HAL_HCD_CLEAR_HC_INT(ch_num, USB_OTG_HCINT_TXERR);
}
else if ((USBx_HC(ch_num)->HCINT & USB_OTG_HCINT_DTERR) == USB_OTG_HCINT_DTERR)
@@ -1467,7 +1507,20 @@
if ((hhcd->hc[ch_num].ep_type == EP_TYPE_BULK) ||
(hhcd->hc[ch_num].ep_type == EP_TYPE_INTR))
{
- hhcd->hc[ch_num].toggle_out ^= 1U;
+ if (hhcd->Init.dma_enable == 0U)
+ {
+ hhcd->hc[ch_num].toggle_out ^= 1U;
+ }
+
+ if ((hhcd->Init.dma_enable == 1U) && (hhcd->hc[ch_num].xfer_len > 0U))
+ {
+ num_packets = (hhcd->hc[ch_num].xfer_len + hhcd->hc[ch_num].max_packet - 1U) / hhcd->hc[ch_num].max_packet;
+
+ if ((num_packets & 1U) != 0U)
+ {
+ hhcd->hc[ch_num].toggle_out ^= 1U;
+ }
+ }
}
}
else if (hhcd->hc[ch_num].state == HC_NAK)
@@ -1486,7 +1539,7 @@
(hhcd->hc[ch_num].state == HC_DATATGLERR))
{
hhcd->hc[ch_num].ErrCnt++;
- if (hhcd->hc[ch_num].ErrCnt > 3U)
+ if (hhcd->hc[ch_num].ErrCnt > 2U)
{
hhcd->hc[ch_num].ErrCnt = 0U;
hhcd->hc[ch_num].urb_state = URB_ERROR;
@@ -1494,13 +1547,13 @@
else
{
hhcd->hc[ch_num].urb_state = URB_NOTREADY;
- }
- /* re-activate the channel */
- tmpreg = USBx_HC(ch_num)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(ch_num)->HCCHAR = tmpreg;
+ /* re-activate the channel */
+ tmpreg = USBx_HC(ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(ch_num)->HCCHAR = tmpreg;
+ }
}
else
{
@@ -1527,14 +1580,15 @@
uint32_t USBx_BASE = (uint32_t)USBx;
uint32_t pktsts;
uint32_t pktcnt;
- uint32_t temp;
+ uint32_t GrxstspReg;
+ uint32_t xferSizePktCnt;
uint32_t tmpreg;
uint32_t ch_num;
- temp = hhcd->Instance->GRXSTSP;
- ch_num = temp & USB_OTG_GRXSTSP_EPNUM;
- pktsts = (temp & USB_OTG_GRXSTSP_PKTSTS) >> 17;
- pktcnt = (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
+ GrxstspReg = hhcd->Instance->GRXSTSP;
+ ch_num = GrxstspReg & USB_OTG_GRXSTSP_EPNUM;
+ pktsts = (GrxstspReg & USB_OTG_GRXSTSP_PKTSTS) >> 17;
+ pktcnt = (GrxstspReg & USB_OTG_GRXSTSP_BCNT) >> 4;
switch (pktsts)
{
@@ -1542,20 +1596,31 @@
/* Read the data into the host buffer. */
if ((pktcnt > 0U) && (hhcd->hc[ch_num].xfer_buff != (void *)0))
{
- (void)USB_ReadPacket(hhcd->Instance, hhcd->hc[ch_num].xfer_buff, (uint16_t)pktcnt);
-
- /*manage multiple Xfer */
- hhcd->hc[ch_num].xfer_buff += pktcnt;
- hhcd->hc[ch_num].xfer_count += pktcnt;
-
- if ((USBx_HC(ch_num)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) > 0U)
+ if ((hhcd->hc[ch_num].xfer_count + pktcnt) <= hhcd->hc[ch_num].xfer_len)
{
- /* re-activate the channel when more packets are expected */
- tmpreg = USBx_HC(ch_num)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(ch_num)->HCCHAR = tmpreg;
- hhcd->hc[ch_num].toggle_in ^= 1U;
+ (void)USB_ReadPacket(hhcd->Instance,
+ hhcd->hc[ch_num].xfer_buff, (uint16_t)pktcnt);
+
+ /* manage multiple Xfer */
+ hhcd->hc[ch_num].xfer_buff += pktcnt;
+ hhcd->hc[ch_num].xfer_count += pktcnt;
+
+ /* get transfer size packet count */
+ xferSizePktCnt = (USBx_HC(ch_num)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) >> 19;
+
+ if ((hhcd->hc[ch_num].max_packet == pktcnt) && (xferSizePktCnt > 0U))
+ {
+ /* re-activate the channel when more packets are expected */
+ tmpreg = USBx_HC(ch_num)->HCCHAR;
+ tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+ tmpreg |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(ch_num)->HCCHAR = tmpreg;
+ hhcd->hc[ch_num].toggle_in ^= 1U;
+ }
+ }
+ else
+ {
+ hhcd->hc[ch_num].urb_state = URB_ERROR;
}
}
break;
@@ -1579,7 +1644,8 @@
{
USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
uint32_t USBx_BASE = (uint32_t)USBx;
- __IO uint32_t hprt0, hprt0_dup;
+ __IO uint32_t hprt0;
+ __IO uint32_t hprt0_dup;
/* Handle Host Port Interrupts */
hprt0 = USBx_HPRT0;
@@ -1599,7 +1665,7 @@
HAL_HCD_Connect_Callback(hhcd);
#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
}
- hprt0_dup |= USB_OTG_HPRT_PCDET;
+ hprt0_dup |= USB_OTG_HPRT_PCDET;
}
/* Check whether Port Enable Changed */
diff --git a/Src/stm32f2xx_hal_i2c.c b/Src/stm32f2xx_hal_i2c.c
index fc9e01a..1330cb5 100644
--- a/Src/stm32f2xx_hal_i2c.c
+++ b/Src/stm32f2xx_hal_i2c.c
@@ -90,7 +90,7 @@
[..]
(+) A specific option field manage the different steps of a sequential transfer
(+) Option field values are defined through @ref I2C_XferOptions_definition and are listed below:
- (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functionnal is same as associated interfaces in no sequential mode
+ (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode
(++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address
and data to transfer without a final stop condition
(++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address
@@ -109,7 +109,7 @@
or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME).
- Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the oposite interface Receive or Transmit
+ Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit
without stopping the communication and so generate a restart condition.
(++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential
interface.
@@ -119,7 +119,7 @@
or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME).
Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition.
- (+) Differents sequential I2C interfaces are listed below:
+ (+) Different sequential I2C interfaces are listed below:
(++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT()
or using @ref HAL_I2C_Master_Seq_Transmit_DMA()
(+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can
@@ -1695,9 +1695,6 @@
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
hi2c->Devaddress = DevAddress;
- /* Generate Start */
- SET_BIT(hi2c->Instance->CR1, I2C_CR1_START);
-
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
@@ -1707,6 +1704,9 @@
/* Enable EVT, BUF and ERR interrupt */
__HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+ /* Generate Start */
+ SET_BIT(hi2c->Instance->CR1, I2C_CR1_START);
+
return HAL_OK;
}
else
@@ -1775,11 +1775,6 @@
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
hi2c->Devaddress = DevAddress;
- /* Enable Acknowledge */
- SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK);
-
- /* Generate Start */
- SET_BIT(hi2c->Instance->CR1, I2C_CR1_START);
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
@@ -1791,6 +1786,12 @@
/* Enable EVT, BUF and ERR interrupt */
__HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+ /* Enable Acknowledge */
+ SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK);
+
+ /* Generate Start */
+ SET_BIT(hi2c->Instance->CR1, I2C_CR1_START);
+
return HAL_OK;
}
else
@@ -1986,29 +1987,40 @@
if (hi2c->XferSize > 0U)
{
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
+ if (hi2c->hdmatx != NULL)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
- /* Set the DMA error callback */
- hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
- /* Set the unused DMA callbacks to NULL */
- hi2c->hdmatx->XferHalfCpltCallback = NULL;
- hi2c->hdmatx->XferM1CpltCallback = NULL;
- hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
- hi2c->hdmatx->XferAbortCallback = NULL;
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferM1CpltCallback = NULL;
+ hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
- /* Enable the DMA stream */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize);
+ /* Enable the DMA stream */
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize);
+ }
+ else
+ {
+ /* Update I2C state */
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Update I2C error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
if (dmaxferstatus == HAL_OK)
{
- /* Enable Acknowledge */
- SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK);
-
- /* Generate Start */
- SET_BIT(hi2c->Instance->CR1, I2C_CR1_START);
-
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
@@ -2021,6 +2033,12 @@
/* Enable DMA Request */
SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN);
+
+ /* Enable Acknowledge */
+ SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK);
+
+ /* Generate Start */
+ SET_BIT(hi2c->Instance->CR1, I2C_CR1_START);
}
else
{
@@ -2127,20 +2145,37 @@
if (hi2c->XferSize > 0U)
{
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
+ if (hi2c->hdmarx != NULL)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
- /* Set the DMA error callback */
- hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
- /* Set the unused DMA callbacks to NULL */
- hi2c->hdmarx->XferHalfCpltCallback = NULL;
- hi2c->hdmarx->XferM1CpltCallback = NULL;
- hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
- hi2c->hdmarx->XferAbortCallback = NULL;
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferM1CpltCallback = NULL;
+ hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
- /* Enable the DMA stream */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+ /* Enable the DMA stream */
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+ }
+ else
+ {
+ /* Update I2C state */
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Update I2C error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
if (dmaxferstatus == HAL_OK)
{
@@ -2180,12 +2215,6 @@
}
else
{
- /* Enable Acknowledge */
- SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK);
-
- /* Generate Start */
- SET_BIT(hi2c->Instance->CR1, I2C_CR1_START);
-
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
@@ -2195,6 +2224,12 @@
/* Enable EVT, BUF and ERR interrupt */
__HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
+
+ /* Enable Acknowledge */
+ SET_BIT(hi2c->Instance->CR1, I2C_CR1_ACK);
+
+ /* Generate Start */
+ SET_BIT(hi2c->Instance->CR1, I2C_CR1_START);
}
return HAL_OK;
@@ -2247,20 +2282,37 @@
hi2c->XferSize = hi2c->XferCount;
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
+ if (hi2c->hdmatx != NULL)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
- /* Set the DMA error callback */
- hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
- /* Set the unused DMA callbacks to NULL */
- hi2c->hdmatx->XferHalfCpltCallback = NULL;
- hi2c->hdmatx->XferM1CpltCallback = NULL;
- hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
- hi2c->hdmatx->XferAbortCallback = NULL;
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferM1CpltCallback = NULL;
+ hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
- /* Enable the DMA stream */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize);
+ /* Enable the DMA stream */
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize);
+ }
+ else
+ {
+ /* Update I2C state */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Update I2C error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
if (dmaxferstatus == HAL_OK)
{
@@ -2344,20 +2396,37 @@
hi2c->XferSize = hi2c->XferCount;
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
+ if (hi2c->hdmarx != NULL)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
- /* Set the DMA error callback */
- hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
- /* Set the unused DMA callbacks to NULL */
- hi2c->hdmarx->XferHalfCpltCallback = NULL;
- hi2c->hdmarx->XferM1CpltCallback = NULL;
- hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
- hi2c->hdmarx->XferAbortCallback = NULL;
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferM1CpltCallback = NULL;
+ hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
- /* Enable the DMA stream */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+ /* Enable the DMA stream */
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+ }
+ else
+ {
+ /* Update I2C state */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Update I2C error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
if (dmaxferstatus == HAL_OK)
{
@@ -3022,20 +3091,37 @@
if (hi2c->XferSize > 0U)
{
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
+ if (hi2c->hdmatx != NULL)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
- /* Set the DMA error callback */
- hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
- /* Set the unused DMA callbacks to NULL */
- hi2c->hdmatx->XferHalfCpltCallback = NULL;
- hi2c->hdmatx->XferM1CpltCallback = NULL;
- hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
- hi2c->hdmatx->XferAbortCallback = NULL;
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferM1CpltCallback = NULL;
+ hi2c->hdmatx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
- /* Enable the DMA stream */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize);
+ /* Enable the DMA stream */
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize);
+ }
+ else
+ {
+ /* Update I2C state */
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Update I2C error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
if (dmaxferstatus == HAL_OK)
{
@@ -3048,11 +3134,8 @@
/* Prevent unused argument(s) compilation and MISRA warning */
UNUSED(dmaxferstatus);
- /* Clear directly Complete callback as no XferAbortCallback is used to finalize Abort treatment */
- if (hi2c->hdmatx != NULL)
- {
- hi2c->hdmatx->XferCpltCallback = NULL;
- }
+ /* Set the unused I2C DMA transfer complete callback to NULL */
+ hi2c->hdmatx->XferCpltCallback = NULL;
/* Disable Acknowledge */
CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK);
@@ -3188,20 +3271,37 @@
if (hi2c->XferSize > 0U)
{
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
+ if (hi2c->hdmarx != NULL)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
- /* Set the DMA error callback */
- hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
- /* Set the unused DMA callbacks to NULL */
- hi2c->hdmarx->XferHalfCpltCallback = NULL;
- hi2c->hdmarx->XferM1CpltCallback = NULL;
- hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
- hi2c->hdmarx->XferAbortCallback = NULL;
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferM1CpltCallback = NULL;
+ hi2c->hdmarx->XferM1HalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
- /* Enable the DMA stream */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+ /* Enable the DMA stream */
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+ }
+ else
+ {
+ /* Update I2C state */
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Update I2C error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
if (dmaxferstatus == HAL_OK)
{
@@ -3214,11 +3314,8 @@
/* Prevent unused argument(s) compilation and MISRA warning */
UNUSED(dmaxferstatus);
- /* Clear directly Complete callback as no XferAbortCallback is used to finalize Abort treatment */
- if (hi2c->hdmarx != NULL)
- {
- hi2c->hdmarx->XferCpltCallback = NULL;
- }
+ /* Set the unused I2C DMA transfer complete callback to NULL */
+ hi2c->hdmarx->XferCpltCallback = NULL;
/* Disable Acknowledge */
CLEAR_BIT(hi2c->Instance->CR1, I2C_CR1_ACK);
@@ -3609,18 +3706,35 @@
if (hi2c->XferSize > 0U)
{
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
+ if (hi2c->hdmatx != NULL)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
- /* Set the DMA error callback */
- hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
- /* Set the unused DMA callbacks to NULL */
- hi2c->hdmatx->XferHalfCpltCallback = NULL;
- hi2c->hdmatx->XferAbortCallback = NULL;
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
- /* Enable the DMA stream */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize);
+ /* Enable the DMA stream */
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize);
+ }
+ else
+ {
+ /* Update I2C state */
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Update I2C error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
if (dmaxferstatus == HAL_OK)
{
@@ -3933,20 +4047,35 @@
SET_BIT(hi2c->Instance->CR2, I2C_CR2_LAST);
}
}
+ if (hi2c->hdmarx != NULL)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
- /* Set the DMA error callback */
- hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
- /* Set the unused DMA callbacks to NULL */
- hi2c->hdmarx->XferHalfCpltCallback = NULL;
- hi2c->hdmarx->XferAbortCallback = NULL;
+ /* Enable the DMA stream */
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+ }
+ else
+ {
+ /* Update I2C state */
+ hi2c->State = HAL_I2C_STATE_READY;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
- /* Enable the DMA stream */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+ /* Update I2C error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
if (dmaxferstatus == HAL_OK)
{
/* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
@@ -4196,18 +4325,35 @@
hi2c->XferSize = hi2c->XferCount;
hi2c->XferOptions = XferOptions;
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
+ if (hi2c->hdmatx != NULL)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmatx->XferCpltCallback = I2C_DMAXferCplt;
- /* Set the DMA error callback */
- hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+ /* Set the DMA error callback */
+ hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
- /* Set the unused DMA callbacks to NULL */
- hi2c->hdmatx->XferHalfCpltCallback = NULL;
- hi2c->hdmatx->XferAbortCallback = NULL;
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmatx->XferHalfCpltCallback = NULL;
+ hi2c->hdmatx->XferAbortCallback = NULL;
- /* Enable the DMA stream */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize);
+ /* Enable the DMA stream */
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->DR, hi2c->XferSize);
+ }
+ else
+ {
+ /* Update I2C state */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Update I2C error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
if (dmaxferstatus == HAL_OK)
{
@@ -4419,18 +4565,35 @@
hi2c->XferSize = hi2c->XferCount;
hi2c->XferOptions = XferOptions;
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
+ if (hi2c->hdmarx != NULL)
+ {
+ /* Set the I2C DMA transfer complete callback */
+ hi2c->hdmarx->XferCpltCallback = I2C_DMAXferCplt;
- /* Set the DMA error callback */
- hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+ /* Set the DMA error callback */
+ hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
- /* Set the unused DMA callbacks to NULL */
- hi2c->hdmarx->XferHalfCpltCallback = NULL;
- hi2c->hdmarx->XferAbortCallback = NULL;
+ /* Set the unused DMA callbacks to NULL */
+ hi2c->hdmarx->XferHalfCpltCallback = NULL;
+ hi2c->hdmarx->XferAbortCallback = NULL;
- /* Enable the DMA stream */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+ /* Enable the DMA stream */
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+ }
+ else
+ {
+ /* Update I2C state */
+ hi2c->State = HAL_I2C_STATE_LISTEN;
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+
+ /* Update I2C error code */
+ hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(hi2c);
+
+ return HAL_ERROR;
+ }
if (dmaxferstatus == HAL_OK)
{
@@ -4661,13 +4824,16 @@
/* BTF set -------------------------------------------------------------*/
else if ((I2C_CHECK_FLAG(sr1itflags, I2C_FLAG_BTF) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_EVT) != RESET))
{
- if (CurrentMode == HAL_I2C_MODE_MASTER)
+ if (CurrentState == HAL_I2C_STATE_BUSY_TX)
{
I2C_MasterTransmit_BTF(hi2c);
}
else /* HAL_I2C_MODE_MEM */
{
- I2C_MemoryTransmit_TXE_BTF(hi2c);
+ if (CurrentMode == HAL_I2C_MODE_MEM)
+ {
+ I2C_MemoryTransmit_TXE_BTF(hi2c);
+ }
}
}
else
@@ -5221,13 +5387,25 @@
hi2c->PreviousState = I2C_STATE_NONE;
hi2c->State = HAL_I2C_STATE_READY;
- hi2c->Mode = HAL_I2C_MODE_NONE;
+ if (hi2c->Mode == HAL_I2C_MODE_MEM)
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+ hi2c->MemTxCpltCallback(hi2c);
+#else
+ HAL_I2C_MemTxCpltCallback(hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ hi2c->Mode = HAL_I2C_MODE_NONE;
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
- hi2c->MasterTxCpltCallback(hi2c);
+ hi2c->MasterTxCpltCallback(hi2c);
#else
- HAL_I2C_MasterTxCpltCallback(hi2c);
+ HAL_I2C_MasterTxCpltCallback(hi2c);
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+ }
}
}
}
@@ -5280,6 +5458,8 @@
{
/* Generate Restart */
hi2c->Instance->CR1 |= I2C_CR1_START;
+
+ hi2c->EventCount++;
}
else if ((hi2c->XferCount > 0U) && (CurrentState == HAL_I2C_STATE_BUSY_TX))
{
@@ -5627,13 +5807,11 @@
/* Send slave address */
hi2c->Instance->DR = I2C_10BIT_ADDRESS(hi2c->Devaddress);
- if ((hi2c->hdmatx != NULL) || (hi2c->hdmarx != NULL))
+ if (((hi2c->hdmatx != NULL) && (hi2c->hdmatx->XferCpltCallback != NULL))
+ || ((hi2c->hdmarx != NULL) && (hi2c->hdmarx->XferCpltCallback != NULL)))
{
- if ((hi2c->hdmatx->XferCpltCallback != NULL) || (hi2c->hdmarx->XferCpltCallback != NULL))
- {
- /* Enable DMA Request */
- SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN);
- }
+ /* Enable DMA Request */
+ SET_BIT(hi2c->Instance->CR2, I2C_CR2_DMAEN);
}
}
@@ -5951,7 +6129,7 @@
else
{
/* Clear ADDR flag */
- __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+ __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
@@ -7295,7 +7473,7 @@
}
/**
- * @brief Convert I2Cx OTHER_xxx XferOptions to functionnal XferOptions.
+ * @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions.
* @param hi2c I2C handle.
* @retval None
*/
diff --git a/Src/stm32f2xx_hal_i2s.c b/Src/stm32f2xx_hal_i2s.c
index a09ffc7..e6fa53d 100644
--- a/Src/stm32f2xx_hal_i2s.c
+++ b/Src/stm32f2xx_hal_i2s.c
@@ -781,7 +781,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @param Timeout Timeout duration
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
@@ -898,7 +898,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @param Timeout Timeout duration
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
@@ -999,7 +999,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
* @retval HAL status
@@ -1063,7 +1063,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
* @note It is recommended to use DMA for the I2S receiver to avoid de-synchronization
@@ -1129,7 +1129,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
* @retval HAL status
@@ -1220,7 +1220,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
* @retval HAL status
diff --git a/Src/stm32f2xx_hal_irda.c b/Src/stm32f2xx_hal_irda.c
index bfcc32d..3a55095 100644
--- a/Src/stm32f2xx_hal_irda.c
+++ b/Src/stm32f2xx_hal_irda.c
@@ -169,7 +169,7 @@
@endverbatim
[..]
- (@) Additionnal remark: If the parity is enabled, then the MSB bit of the data written
+ (@) Additional remark: If the parity is enabled, then the MSB bit of the data written
in the data register is transmitted but is changed by the parity bit.
Depending on the frame length defined by the M bit (8-bits or 9-bits),
the possible IRDA frame formats are as listed in the following table:
@@ -786,7 +786,7 @@
hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
hirda->gState = HAL_IRDA_STATE_BUSY_TX;
- /* Init tickstart for timeout managment*/
+ /* Init tickstart for timeout management*/
tickstart = HAL_GetTick();
hirda->TxXferSize = Size;
@@ -871,7 +871,7 @@
hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
hirda->RxState = HAL_IRDA_STATE_BUSY_RX;
- /* Init tickstart for timeout managment*/
+ /* Init tickstart for timeout management*/
tickstart = HAL_GetTick();
hirda->RxXferSize = Size;
@@ -1223,7 +1223,7 @@
/* Clear the Overrun flag before resuming the Rx transfer */
__HAL_IRDA_CLEAR_OREFLAG(hirda);
- /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */
SET_BIT(hirda->Instance->CR1, USART_CR1_PEIE);
SET_BIT(hirda->Instance->CR3, USART_CR3_EIE);
diff --git a/Src/stm32f2xx_hal_iwdg.c b/Src/stm32f2xx_hal_iwdg.c
index e6066e2..f3d6b09 100644
--- a/Src/stm32f2xx_hal_iwdg.c
+++ b/Src/stm32f2xx_hal_iwdg.c
@@ -115,11 +115,14 @@
/* Status register needs up to 5 LSI clock periods divided by the clock
prescaler to be updated. The number of LSI clock periods is upper-rounded to
6 for the timeout value calculation.
- The timeout value is also calculated using the highest prescaler (256) and
+ The timeout value is calculated using the highest prescaler (256) and
the LSI_VALUE constant. The value of this constant can be changed by the user
to take into account possible LSI clock period variations.
- The timeout value is multiplied by 1000 to be converted in milliseconds. */
-#define HAL_IWDG_DEFAULT_TIMEOUT ((6UL * 256UL * 1000UL) / LSI_VALUE)
+ The timeout value is multiplied by 1000 to be converted in milliseconds.
+ LSI startup time is also considered here by adding LSI_STARTUP_TIMEOUT
+ converted in milliseconds. */
+#define HAL_IWDG_DEFAULT_TIMEOUT (((6UL * 256UL * 1000UL) / LSI_VALUE) + ((LSI_STARTUP_TIME / 1000UL) + 1UL))
+#define IWDG_KERNEL_UPDATE_FLAGS (IWDG_SR_RVU | IWDG_SR_PVU)
/**
* @}
*/
@@ -188,11 +191,14 @@
tickstart = HAL_GetTick();
/* Wait for register to be updated */
- while (hiwdg->Instance->SR != 0x00u)
+ while ((hiwdg->Instance->SR & IWDG_KERNEL_UPDATE_FLAGS) != 0x00u)
{
if ((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT)
{
- return HAL_TIMEOUT;
+ if ((hiwdg->Instance->SR & IWDG_KERNEL_UPDATE_FLAGS) != 0x00u)
+ {
+ return HAL_TIMEOUT;
+ }
}
}
@@ -203,6 +209,7 @@
return HAL_OK;
}
+
/**
* @}
*/
@@ -222,7 +229,6 @@
* @{
*/
-
/**
* @brief Refresh the IWDG.
* @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
@@ -238,6 +244,7 @@
return HAL_OK;
}
+
/**
* @}
*/
diff --git a/Src/stm32f2xx_hal_mmc.c b/Src/stm32f2xx_hal_mmc.c
index 1166f4f..8a91706 100644
--- a/Src/stm32f2xx_hal_mmc.c
+++ b/Src/stm32f2xx_hal_mmc.c
@@ -287,6 +287,7 @@
static uint32_t MMC_InitCard(MMC_HandleTypeDef *hmmc);
static uint32_t MMC_PowerON(MMC_HandleTypeDef *hmmc);
static uint32_t MMC_SendStatus(MMC_HandleTypeDef *hmmc, uint32_t *pCardStatus);
+static uint32_t MMC_ReadExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pFieldData, uint16_t FieldIndex, uint32_t Timeout);
static void MMC_PowerOFF(MMC_HandleTypeDef *hmmc);
static void MMC_Write_IT(MMC_HandleTypeDef *hmmc);
static void MMC_Read_IT(MMC_HandleTypeDef *hmmc);
@@ -444,6 +445,17 @@
return HAL_ERROR;
}
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
return HAL_OK;
}
@@ -584,17 +596,6 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
- if(errorstate != HAL_MMC_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
- hmmc->ErrorCode |= errorstate;
- hmmc->State = HAL_MMC_STATE_READY;
- return HAL_ERROR;
- }
-
/* Configure the MMC DPSM (Data Path State Machine) */
config.DataTimeOut = SDMMC_DATATIMEOUT;
config.DataLength = NumberOfBlocks * MMC_BLOCKSIZE;
@@ -796,17 +797,6 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
- if(errorstate != HAL_MMC_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
- hmmc->ErrorCode |= errorstate;
- hmmc->State = HAL_MMC_STATE_READY;
- return HAL_ERROR;
- }
-
/* Write Blocks in Polling mode */
if(NumberOfBlocks > 1U)
{
@@ -984,17 +974,6 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
- if(errorstate != HAL_MMC_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
- hmmc->ErrorCode |= errorstate;
- hmmc->State = HAL_MMC_STATE_READY;
- return HAL_ERROR;
- }
-
/* Configure the MMC DPSM (Data Path State Machine) */
config.DataTimeOut = SDMMC_DATATIMEOUT;
config.DataLength = MMC_BLOCKSIZE * NumberOfBlocks;
@@ -1088,17 +1067,6 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
- if(errorstate != HAL_MMC_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
- hmmc->ErrorCode |= errorstate;
- hmmc->State = HAL_MMC_STATE_READY;
- return HAL_ERROR;
- }
-
/* Write Blocks in Polling mode */
if(NumberOfBlocks > 1U)
{
@@ -1196,16 +1164,9 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
- if(errorstate != HAL_MMC_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
- hmmc->ErrorCode = errorstate;
- hmmc->State = HAL_MMC_STATE_READY;
- return HAL_ERROR;
- }
+ /* Force DMA Direction */
+ hmmc->hdmarx->Init.Direction = DMA_PERIPH_TO_MEMORY;
+ MODIFY_REG(hmmc->hdmarx->Instance->CR, DMA_SxCR_DIR, hmmc->hdmarx->Init.Direction);
/* Enable the DMA Channel */
if(HAL_DMA_Start_IT(hmmc->hdmarx, (uint32_t)&hmmc->Instance->FIFO, (uint32_t)pData, (uint32_t)(MMC_BLOCKSIZE * NumberOfBlocks)/4) != HAL_OK)
@@ -1321,16 +1282,6 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hmmc->Instance, MMC_BLOCKSIZE);
- if(errorstate != HAL_MMC_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
- hmmc->ErrorCode |= errorstate;
- hmmc->State = HAL_MMC_STATE_READY;
- return HAL_ERROR;
- }
/* Write Blocks in Polling mode */
if(NumberOfBlocks > 1U)
@@ -1360,6 +1311,10 @@
/* Enable SDIO DMA transfer */
__HAL_MMC_DMA_ENABLE(hmmc);
+ /* Force DMA Direction */
+ hmmc->hdmatx->Init.Direction = DMA_MEMORY_TO_PERIPH;
+ MODIFY_REG(hmmc->hdmatx->Instance->CR, DMA_SxCR_DIR, hmmc->hdmatx->Init.Direction);
+
/* Enable the DMA Channel */
if(HAL_DMA_Start_IT(hmmc->hdmatx, (uint32_t)pData, (uint32_t)&hmmc->Instance->FIFO, (uint32_t)(MMC_BLOCKSIZE * NumberOfBlocks)/4) != HAL_OK)
{
@@ -1996,6 +1951,8 @@
*/
HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD)
{
+ uint32_t block_nbr = 0;
+
pCSD->CSDStruct = (uint8_t)((hmmc->CSD[0] & 0xC0000000U) >> 30U);
pCSD->SysSpecVersion = (uint8_t)((hmmc->CSD[0] & 0x3C000000U) >> 26U);
@@ -2034,13 +1991,35 @@
pCSD->DeviceSizeMul = (uint8_t)((hmmc->CSD[2] & 0x00038000U) >> 15U);
- hmmc->MmcCard.BlockNbr = (pCSD->DeviceSize + 1U) ;
- hmmc->MmcCard.BlockNbr *= (1UL << ((pCSD->DeviceSizeMul & 0x07U) + 2U));
- hmmc->MmcCard.BlockSize = (1UL << (pCSD->RdBlockLen & 0x0FU));
+ if(MMC_ReadExtCSD(hmmc, &block_nbr, 212, 0x0FFFFFFFU) != HAL_OK) /* Field SEC_COUNT [215:212] */
+ {
+ return HAL_ERROR;
+ }
- hmmc->MmcCard.LogBlockNbr = (hmmc->MmcCard.BlockNbr) * ((hmmc->MmcCard.BlockSize) / 512U);
- hmmc->MmcCard.LogBlockSize = 512U;
-
+ if(hmmc->MmcCard.CardType == MMC_LOW_CAPACITY_CARD)
+ {
+ hmmc->MmcCard.BlockNbr = (pCSD->DeviceSize + 1U) ;
+ hmmc->MmcCard.BlockNbr *= (1UL << ((pCSD->DeviceSizeMul & 0x07U) + 2U));
+ hmmc->MmcCard.BlockSize = (1UL << (pCSD->RdBlockLen & 0x0FU));
+ hmmc->MmcCard.LogBlockNbr = (hmmc->MmcCard.BlockNbr) * ((hmmc->MmcCard.BlockSize) / 512U);
+ hmmc->MmcCard.LogBlockSize = 512U;
+ }
+ else if(hmmc->MmcCard.CardType == MMC_HIGH_CAPACITY_CARD)
+ {
+ hmmc->MmcCard.BlockNbr = block_nbr;
+ hmmc->MmcCard.LogBlockNbr = hmmc->MmcCard.BlockNbr;
+ hmmc->MmcCard.BlockSize = 512U;
+ hmmc->MmcCard.LogBlockSize = hmmc->MmcCard.BlockSize;
+ }
+ else
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_UNSUPPORTED_FEATURE;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
pCSD->EraseGrSize = (uint8_t)((hmmc->CSD[2] & 0x00004000U) >> 14U);
pCSD->EraseGrMul = (uint8_t)((hmmc->CSD[2] & 0x00003F80U) >> 7U);
@@ -2121,7 +2100,7 @@
/* Check the parameters */
assert_param(IS_SDIO_BUS_WIDE(WideMode));
- /* Chnage Satte */
+ /* Change State */
hmmc->State = HAL_MMC_STATE_BUSY;
/* Update Clock for Bus mode update */
@@ -2709,7 +2688,7 @@
}
/* When power routine is finished and command returns valid voltage */
- if (((response & (0xFF000000U)) >> 24) == 0xC0U)
+ if (((response & (0xFF000000U)) >> 24U) == 0xC0U)
{
hmmc->MmcCard.CardType = MMC_HIGH_CAPACITY_CARD;
}
@@ -2762,6 +2741,93 @@
}
/**
+ * @brief Reads extended CSD register to get the sectors number of the device
+ * @param hmmc: Pointer to MMC handle
+ * @param pFieldData: Pointer to the read buffer
+ * @param FieldIndex: Index of the field to be read
+ * @param Timeout: Specify timeout value
+ * @retval HAL status
+ */
+static uint32_t MMC_ReadExtCSD(MMC_HandleTypeDef *hmmc, uint32_t *pFieldData, uint16_t FieldIndex, uint32_t Timeout)
+{
+ SDIO_DataInitTypeDef config;
+ uint32_t errorstate;
+ uint32_t tickstart = HAL_GetTick();
+ uint32_t count;
+ uint32_t i = 0;
+ uint32_t tmp_data;
+
+ hmmc->ErrorCode = HAL_MMC_ERROR_NONE;
+
+ /* Initialize data control register */
+ hmmc->Instance->DCTRL = 0;
+
+ /* Configure the MMC DPSM (Data Path State Machine) */
+ config.DataTimeOut = SDMMC_DATATIMEOUT;
+ config.DataLength = 512;
+ config.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
+ config.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
+ config.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
+ config.DPSM = SDIO_DPSM_ENABLE;
+ (void)SDIO_ConfigData(hmmc->Instance, &config);
+
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdSendEXTCSD(hmmc->Instance, 0);
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= errorstate;
+ hmmc->State = HAL_MMC_STATE_READY;
+ return HAL_ERROR;
+ }
+
+ /* Poll on SDMMC flags */
+ while(!__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND))
+ {
+ if(__HAL_MMC_GET_FLAG(hmmc, SDIO_FLAG_RXFIFOHF))
+ {
+ /* Read data from SDMMC Rx FIFO */
+ for(count = 0U; count < 8U; count++)
+ {
+ tmp_data = SDIO_ReadFIFO(hmmc->Instance);
+ /* eg : SEC_COUNT : FieldIndex = 212 => i+count = 53 */
+ /* DEVICE_TYPE : FieldIndex = 196 => i+count = 49 */
+ if ((i + count) == ((uint32_t)FieldIndex/4U))
+ {
+ *pFieldData = tmp_data;
+ }
+ }
+ i += 8U;
+ }
+
+ if(((HAL_GetTick()-tickstart) >= Timeout) || (Timeout == 0U))
+ {
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_FLAGS);
+ hmmc->ErrorCode |= HAL_MMC_ERROR_TIMEOUT;
+ hmmc->State= HAL_MMC_STATE_READY;
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* While card is not ready for data and trial number for sending CMD13 is not exceeded */
+ errorstate = SDMMC_CmdSendStatus(hmmc->Instance, (uint32_t)(((uint32_t)hmmc->MmcCard.RelCardAdd) << 16));
+ if(errorstate != HAL_MMC_ERROR_NONE)
+ {
+ hmmc->ErrorCode |= errorstate;
+ }
+
+ /* Clear all the static flags */
+ __HAL_MMC_CLEAR_FLAG(hmmc, SDIO_STATIC_DATA_FLAGS);
+
+ hmmc->State = HAL_MMC_STATE_READY;
+
+ return HAL_OK;
+}
+
+
+/**
* @brief Wrap up reading in non-blocking mode.
* @param hmmc: pointer to a MMC_HandleTypeDef structure that contains
* the configuration information.
diff --git a/Src/stm32f2xx_hal_nand.c b/Src/stm32f2xx_hal_nand.c
index 6a45b1e..50918ff 100644
--- a/Src/stm32f2xx_hal_nand.c
+++ b/Src/stm32f2xx_hal_nand.c
@@ -181,7 +181,7 @@
#else
/* Initialize the low level hardware (MSP) */
HAL_NAND_MspInit(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
}
/* Initialize NAND control Interface */
@@ -221,7 +221,7 @@
#else
/* Initialize the low level hardware (MSP) */
HAL_NAND_MspDeInit(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
/* Configure the NAND registers with their reset values */
(void)FSMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank);
@@ -284,7 +284,7 @@
hnand->ItCallback(hnand);
#else
HAL_NAND_ITCallback(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
/* Clear NAND interrupt Rising edge pending bit */
__FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_RISING_EDGE);
@@ -298,7 +298,7 @@
hnand->ItCallback(hnand);
#else
HAL_NAND_ITCallback(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
/* Clear NAND interrupt Level pending bit */
__FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_LEVEL);
@@ -312,7 +312,7 @@
hnand->ItCallback(hnand);
#else
HAL_NAND_ITCallback(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
/* Clear NAND interrupt Falling edge pending bit */
__FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_FALLING_EDGE);
@@ -326,7 +326,7 @@
hnand->ItCallback(hnand);
#else
HAL_NAND_ITCallback(hnand);
-#endif
+#endif /* (USE_HAL_NAND_REGISTER_CALLBACKS) */
/* Clear NAND interrupt FIFO empty pending bit */
__FSMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FSMC_FLAG_FEMPT);
@@ -699,7 +699,7 @@
uint32_t index;
uint32_t tickstart;
uint32_t deviceaddress;
- uint32_t numpagesread = 0;
+ uint32_t numpagesread = 0U;
uint32_t nandaddress;
uint32_t nbpages = NumPageToRead;
uint16_t *buff = pBuffer;
@@ -817,6 +817,17 @@
__DSB();
}
+ /* Calculate PageSize */
+ if (hnand->Init.MemoryDataWidth == FSMC_NAND_PCC_MEM_BUS_WIDTH_8)
+ {
+ hnand->Config.PageSize = hnand->Config.PageSize / 2U;
+ }
+ else
+ {
+ /* Do nothing */
+ /* Keep the same PageSize for FMC_NAND_MEM_BUS_WIDTH_16*/
+ }
+
/* Get Data into Buffer */
for (index = 0U; index < hnand->Config.PageSize; index++)
{
@@ -863,7 +874,7 @@
uint32_t index;
uint32_t tickstart;
uint32_t deviceaddress;
- uint32_t numpageswritten = 0;
+ uint32_t numpageswritten = 0U;
uint32_t nandaddress;
uint32_t nbpages = NumPageToWrite;
uint8_t *buff = pBuffer;
@@ -1023,7 +1034,7 @@
uint32_t index;
uint32_t tickstart;
uint32_t deviceaddress;
- uint32_t numpageswritten = 0;
+ uint32_t numpageswritten = 0U;
uint32_t nandaddress;
uint32_t nbpages = NumPageToWrite;
uint16_t *buff = pBuffer;
@@ -1115,6 +1126,17 @@
}
}
+ /* Calculate PageSize */
+ if (hnand->Init.MemoryDataWidth == FSMC_NAND_PCC_MEM_BUS_WIDTH_8)
+ {
+ hnand->Config.PageSize = hnand->Config.PageSize / 2U;
+ }
+ else
+ {
+ /* Do nothing */
+ /* Keep the same PageSize for FMC_NAND_MEM_BUS_WIDTH_16*/
+ }
+
/* Write data to memory */
for (index = 0U; index < hnand->Config.PageSize; index++)
{
@@ -1183,7 +1205,7 @@
uint32_t index;
uint32_t tickstart;
uint32_t deviceaddress;
- uint32_t numsparearearead = 0;
+ uint32_t numsparearearead = 0U;
uint32_t nandaddress;
uint32_t columnaddress;
uint32_t nbspare = NumSpareAreaToRead;
@@ -1355,7 +1377,7 @@
uint32_t index;
uint32_t tickstart;
uint32_t deviceaddress;
- uint32_t numsparearearead = 0;
+ uint32_t numsparearearead = 0U;
uint32_t nandaddress;
uint32_t columnaddress;
uint32_t nbspare = NumSpareAreaToRead;
@@ -1388,7 +1410,7 @@
nandaddress = ARRAY_ADDRESS(pAddress, hnand);
/* Column in page address */
- columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand) * 2U);
+ columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand));
/* Spare area(s) read loop */
while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
@@ -1527,7 +1549,7 @@
uint32_t index;
uint32_t tickstart;
uint32_t deviceaddress;
- uint32_t numspareareawritten = 0;
+ uint32_t numspareareawritten = 0U;
uint32_t nandaddress;
uint32_t columnaddress;
uint32_t nbspare = NumSpareAreaTowrite;
@@ -1697,7 +1719,7 @@
uint32_t index;
uint32_t tickstart;
uint32_t deviceaddress;
- uint32_t numspareareawritten = 0;
+ uint32_t numspareareawritten = 0U;
uint32_t nandaddress;
uint32_t columnaddress;
uint32_t nbspare = NumSpareAreaTowrite;
@@ -1730,7 +1752,7 @@
nandaddress = ARRAY_ADDRESS(pAddress, hnand);
/* Column in page address */
- columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand) * 2U);
+ columnaddress = (uint32_t)(COLUMN_ADDRESS(hnand));
/* Spare area(s) write loop */
while ((nbspare != 0U) && (nandaddress < ((hnand->Config.BlockSize) * (hnand->Config.BlockNbr))))
@@ -2085,7 +2107,7 @@
__HAL_UNLOCK(hnand);
return status;
}
-#endif
+#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
/**
* @}
diff --git a/Src/stm32f2xx_hal_nor.c b/Src/stm32f2xx_hal_nor.c
index 5d57408..7993757 100644
--- a/Src/stm32f2xx_hal_nor.c
+++ b/Src/stm32f2xx_hal_nor.c
@@ -472,9 +472,12 @@
{
/* Read the NOR IDs */
pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, MC_ADDRESS);
- pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE1_ADDR);
- pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE2_ADDR);
- pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth, DEVICE_CODE3_ADDR);
+ pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth,
+ DEVICE_CODE1_ADDR);
+ pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth,
+ DEVICE_CODE2_ADDR);
+ pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, uwNORMemoryDataWidth,
+ DEVICE_CODE3_ADDR);
}
/* Check the NOR controller state */
diff --git a/Src/stm32f2xx_hal_pcd.c b/Src/stm32f2xx_hal_pcd.c
index ed5c1b6..5e943c5 100644
--- a/Src/stm32f2xx_hal_pcd.c
+++ b/Src/stm32f2xx_hal_pcd.c
@@ -712,7 +712,8 @@
/**
* @brief Unregister the USB PCD Iso OUT incomplete Callback
- * USB PCD Iso OUT incomplete Callback is redirected to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback
+ * USB PCD Iso OUT incomplete Callback is redirected
+ * to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback
* @param hpcd PCD handle
* @retval HAL status
*/
@@ -786,7 +787,8 @@
/**
* @brief Unregister the USB PCD Iso IN incomplete Callback
- * USB PCD Iso IN incomplete Callback is redirected to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback
+ * USB PCD Iso IN incomplete Callback is redirected
+ * to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback
* @param hpcd PCD handle
* @retval HAL status
*/
@@ -880,9 +882,13 @@
{
USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
uint32_t USBx_BASE = (uint32_t)USBx;
- uint32_t i, ep_intr, epint, epnum;
- uint32_t fifoemptymsk, temp;
USB_OTG_EPTypeDef *ep;
+ uint32_t i;
+ uint32_t ep_intr;
+ uint32_t epint;
+ uint32_t epnum;
+ uint32_t fifoemptymsk;
+ uint32_t temp;
/* ensure that we are in device mode */
if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE)
diff --git a/Src/stm32f2xx_hal_rng.c b/Src/stm32f2xx_hal_rng.c
index 5e54018..c0c442b 100644
--- a/Src/stm32f2xx_hal_rng.c
+++ b/Src/stm32f2xx_hal_rng.c
@@ -129,8 +129,8 @@
*/
/** @addtogroup RNG_Exported_Functions_Group1
- * @brief Initialization and configuration functions
- *
+ * @brief Initialization and configuration functions
+ *
@verbatim
===============================================================================
##### Initialization and configuration functions #####
@@ -296,7 +296,8 @@
* @param pCallback pointer to the Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, pRNG_CallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID,
+ pRNG_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -313,44 +314,44 @@
{
switch (CallbackID)
{
- case HAL_RNG_ERROR_CB_ID :
- hrng->ErrorCallback = pCallback;
- break;
+ case HAL_RNG_ERROR_CB_ID :
+ hrng->ErrorCallback = pCallback;
+ break;
- case HAL_RNG_MSPINIT_CB_ID :
- hrng->MspInitCallback = pCallback;
- break;
+ case HAL_RNG_MSPINIT_CB_ID :
+ hrng->MspInitCallback = pCallback;
+ break;
- case HAL_RNG_MSPDEINIT_CB_ID :
- hrng->MspDeInitCallback = pCallback;
- break;
+ case HAL_RNG_MSPDEINIT_CB_ID :
+ hrng->MspDeInitCallback = pCallback;
+ break;
- default :
- /* Update the error code */
- hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
+ default :
+ /* Update the error code */
+ hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
}
}
else if (HAL_RNG_STATE_RESET == hrng->State)
{
switch (CallbackID)
{
- case HAL_RNG_MSPINIT_CB_ID :
- hrng->MspInitCallback = pCallback;
- break;
+ case HAL_RNG_MSPINIT_CB_ID :
+ hrng->MspInitCallback = pCallback;
+ break;
- case HAL_RNG_MSPDEINIT_CB_ID :
- hrng->MspDeInitCallback = pCallback;
- break;
+ case HAL_RNG_MSPDEINIT_CB_ID :
+ hrng->MspDeInitCallback = pCallback;
+ break;
- default :
- /* Update the error code */
- hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
+ default :
+ /* Update the error code */
+ hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
}
}
else
@@ -388,44 +389,44 @@
{
switch (CallbackID)
{
- case HAL_RNG_ERROR_CB_ID :
- hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */
- break;
+ case HAL_RNG_ERROR_CB_ID :
+ hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */
+ break;
- case HAL_RNG_MSPINIT_CB_ID :
- hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */
- break;
+ case HAL_RNG_MSPINIT_CB_ID :
+ hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */
+ break;
- case HAL_RNG_MSPDEINIT_CB_ID :
- hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */
- break;
+ case HAL_RNG_MSPDEINIT_CB_ID :
+ hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */
+ break;
- default :
- /* Update the error code */
- hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
+ default :
+ /* Update the error code */
+ hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
}
}
else if (HAL_RNG_STATE_RESET == hrng->State)
{
switch (CallbackID)
{
- case HAL_RNG_MSPINIT_CB_ID :
- hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */
- break;
+ case HAL_RNG_MSPINIT_CB_ID :
+ hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */
+ break;
- case HAL_RNG_MSPDEINIT_CB_ID :
- hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspInit */
- break;
+ case HAL_RNG_MSPDEINIT_CB_ID :
+ hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspInit */
+ break;
- default :
- /* Update the error code */
- hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
+ default :
+ /* Update the error code */
+ hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
}
}
else
@@ -515,8 +516,8 @@
*/
/** @addtogroup RNG_Exported_Functions_Group2
- * @brief Peripheral Control functions
- *
+ * @brief Peripheral Control functions
+ *
@verbatim
===============================================================================
##### Peripheral Control functions #####
@@ -562,11 +563,15 @@
{
if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE)
{
- hrng->State = HAL_RNG_STATE_READY;
- hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT;
- /* Process Unlocked */
- __HAL_UNLOCK(hrng);
- return HAL_ERROR;
+ /* New check to avoid false timeout detection in case of preemption */
+ if (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET)
+ {
+ hrng->State = HAL_RNG_STATE_READY;
+ hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrng);
+ return HAL_ERROR;
+ }
}
}
@@ -631,7 +636,7 @@
*/
uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng)
{
- if(HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK)
+ if (HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK)
{
return hrng->RandomNumber;
}
@@ -726,6 +731,8 @@
/* Clear the clock error flag */
__HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI | RNG_IT_SEI);
+
+ return;
}
/* Check RNG data ready interrupt occurred */
@@ -803,8 +810,8 @@
/** @addtogroup RNG_Exported_Functions_Group3
- * @brief Peripheral State functions
- *
+ * @brief Peripheral State functions
+ *
@verbatim
===============================================================================
##### Peripheral State functions #####
@@ -832,7 +839,7 @@
* @brief Return the RNG handle error code.
* @param hrng: pointer to a RNG_HandleTypeDef structure.
* @retval RNG Error Code
-*/
+ */
uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng)
{
/* Return RNG Error Code */
diff --git a/Src/stm32f2xx_hal_rtc.c b/Src/stm32f2xx_hal_rtc.c
index a89c286..9fed521 100644
--- a/Src/stm32f2xx_hal_rtc.c
+++ b/Src/stm32f2xx_hal_rtc.c
@@ -765,10 +765,10 @@
/* Set the RTC_TR register */
hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK);
- /* Clear the bits to be configured */
+ /* This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
hrtc->Instance->CR &= (uint32_t)~RTC_CR_BCK;
- /* Configure the RTC_CR register */
+ /* This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation);
/* Exit Initialization mode */
@@ -985,6 +985,67 @@
}
/**
+ * @brief Daylight Saving Time, Add one hour to the calendar in one single operation
+ * without going through the initialization procedure.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc)
+{
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ SET_BIT(hrtc->Instance->CR, RTC_CR_ADD1H);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Subtract one hour from the calendar in one
+ * single operation without going through the initialization procedure.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc)
+{
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ SET_BIT(hrtc->Instance->CR, RTC_CR_SUB1H);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Set the store operation bit.
+ * @note It can be used by the software in order to memorize the DST status.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ SET_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Clear the store operation bit.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ CLEAR_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Read the store operation bit.
+ * @param hrtc RTC handle
+ * @retval operation see RTC_StoreOperation_Definitions
+ */
+uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+ return READ_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+}
+
+/**
* @}
*/
diff --git a/Src/stm32f2xx_hal_sd.c b/Src/stm32f2xx_hal_sd.c
index 569c8b1..f61772c 100644
--- a/Src/stm32f2xx_hal_sd.c
+++ b/Src/stm32f2xx_hal_sd.c
@@ -448,6 +448,17 @@
return HAL_ERROR;
}
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ return HAL_ERROR;
+ }
+
return HAL_OK;
}
@@ -588,17 +599,6 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
- if(errorstate != HAL_SD_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
- hsd->ErrorCode |= errorstate;
- hsd->State = HAL_SD_STATE_READY;
- return HAL_ERROR;
- }
-
/* Configure the SD DPSM (Data Path State Machine) */
config.DataTimeOut = SDMMC_DATATIMEOUT;
config.DataLength = NumberOfBlocks * BLOCKSIZE;
@@ -810,17 +810,6 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
- if(errorstate != HAL_SD_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
- hsd->ErrorCode |= errorstate;
- hsd->State = HAL_SD_STATE_READY;
- return HAL_ERROR;
- }
-
/* Configure the SD DPSM (Data Path State Machine) */
config.DataTimeOut = SDMMC_DATATIMEOUT;
config.DataLength = NumberOfBlocks * BLOCKSIZE;
@@ -1007,17 +996,6 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
- if(errorstate != HAL_SD_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
- hsd->ErrorCode |= errorstate;
- hsd->State = HAL_SD_STATE_READY;
- return HAL_ERROR;
- }
-
/* Configure the SD DPSM (Data Path State Machine) */
config.DataTimeOut = SDMMC_DATATIMEOUT;
config.DataLength = BLOCKSIZE * NumberOfBlocks;
@@ -1111,17 +1089,6 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
- if(errorstate != HAL_SD_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
- hsd->ErrorCode |= errorstate;
- hsd->State = HAL_SD_STATE_READY;
- return HAL_ERROR;
- }
-
/* Write Blocks in Polling mode */
if(NumberOfBlocks > 1U)
{
@@ -1215,6 +1182,10 @@
/* Set the DMA Abort callback */
hsd->hdmarx->XferAbortCallback = NULL;
+ /* Force DMA Direction */
+ hsd->hdmarx->Init.Direction = DMA_PERIPH_TO_MEMORY;
+ MODIFY_REG(hsd->hdmarx->Instance->CR, DMA_SxCR_DIR, hsd->hdmarx->Init.Direction);
+
/* Enable the DMA Channel */
if(HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pData, (uint32_t)(BLOCKSIZE * NumberOfBlocks)/4U) != HAL_OK)
{
@@ -1234,17 +1205,6 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
- if(errorstate != HAL_SD_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
- hsd->ErrorCode |= errorstate;
- hsd->State = HAL_SD_STATE_READY;
- return HAL_ERROR;
- }
-
/* Configure the SD DPSM (Data Path State Machine) */
config.DataTimeOut = SDMMC_DATATIMEOUT;
config.DataLength = BLOCKSIZE * NumberOfBlocks;
@@ -1345,17 +1305,6 @@
add *= 512U;
}
- /* Set Block Size for Card */
- errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
- if(errorstate != HAL_SD_ERROR_NONE)
- {
- /* Clear all the static flags */
- __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
- hsd->ErrorCode |= errorstate;
- hsd->State = HAL_SD_STATE_READY;
- return HAL_ERROR;
- }
-
/* Write Blocks in Polling mode */
if(NumberOfBlocks > 1U)
{
@@ -1384,6 +1333,10 @@
/* Enable SDIO DMA transfer */
__HAL_SD_DMA_ENABLE(hsd);
+ /* Force DMA Direction */
+ hsd->hdmatx->Init.Direction = DMA_MEMORY_TO_PERIPH;
+ MODIFY_REG(hsd->hdmatx->Instance->CR, DMA_SxCR_DIR, hsd->hdmatx->Init.Direction);
+
/* Enable the DMA Channel */
if(HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pData, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BLOCKSIZE * NumberOfBlocks)/4U) != HAL_OK)
{
@@ -2144,6 +2097,7 @@
{
uint32_t sd_status[16];
uint32_t errorstate;
+ HAL_StatusTypeDef status = HAL_OK;
errorstate = SD_SendSDStatus(hsd, sd_status);
if(errorstate != HAL_SD_ERROR_NONE)
@@ -2152,7 +2106,7 @@
__HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
hsd->ErrorCode |= errorstate;
hsd->State = HAL_SD_STATE_READY;
- return HAL_ERROR;
+ status = HAL_ERROR;
}
else
{
@@ -2178,7 +2132,18 @@
pStatus->EraseOffset = (uint8_t)((sd_status[3] & 0x0300U) >> 8U);
}
- return HAL_OK;
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode = errorstate;
+ hsd->State = HAL_SD_STATE_READY;
+ status = HAL_ERROR;
+ }
+
+ return status;
}
/**
@@ -2217,6 +2182,7 @@
{
SDIO_InitTypeDef Init;
uint32_t errorstate;
+ HAL_StatusTypeDef status = HAL_OK;
/* Check the parameters */
assert_param(IS_SDIO_BUS_WIDE(WideMode));
@@ -2259,7 +2225,7 @@
/* Clear all the static flags */
__HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
hsd->State = HAL_SD_STATE_READY;
- return HAL_ERROR;
+ status = HAL_ERROR;
}
else
{
@@ -2273,10 +2239,20 @@
(void)SDIO_Init(hsd->Instance, Init);
}
+ /* Set Block Size for Card */
+ errorstate = SDMMC_CmdBlockLength(hsd->Instance, BLOCKSIZE);
+ if(errorstate != HAL_SD_ERROR_NONE)
+ {
+ /* Clear all the static flags */
+ __HAL_SD_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
+ hsd->ErrorCode |= errorstate;
+ status = HAL_ERROR;
+ }
+
/* Change State */
hsd->State = HAL_SD_STATE_READY;
- return HAL_OK;
+ return status;
}
/**
@@ -3097,13 +3073,17 @@
return errorstate;
}
- while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
+ while(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT))
{
if(__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXDAVL))
{
*(tempscr + index) = SDIO_ReadFIFO(hsd->Instance);
index++;
}
+ else if(!__HAL_SD_GET_FLAG(hsd, SDIO_FLAG_RXACT))
+ {
+ break;
+ }
if((HAL_GetTick() - tickstart) >= SDMMC_DATATIMEOUT)
{
diff --git a/Src/stm32f2xx_hal_smartcard.c b/Src/stm32f2xx_hal_smartcard.c
index 063b075..67e4b44 100644
--- a/Src/stm32f2xx_hal_smartcard.c
+++ b/Src/stm32f2xx_hal_smartcard.c
@@ -736,7 +736,7 @@
and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side.
If user wants to abort it, Abort services should be called by user.
(+) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
- This concerns Frame Error in Interrupt mode tranmission, Overrun Error in Interrupt mode reception and all errors in DMA mode.
+ This concerns Frame Error in Interrupt mode transmission, Overrun Error in Interrupt mode reception and all errors in DMA mode.
Error code is set to allow user to identify error type, and HAL_SMARTCARD_ErrorCallback() user callback is executed.
@endverbatim
@@ -770,7 +770,7 @@
hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
hsc->gState = HAL_SMARTCARD_STATE_BUSY_TX;
- /* Init tickstart for timeout managment */
+ /* Init tickstart for timeout management */
tickstart = HAL_GetTick();
hsc->TxXferSize = Size;
@@ -832,7 +832,7 @@
hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
hsc->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
- /* Init tickstart for timeout managment */
+ /* Init tickstart for timeout management */
tickstart = HAL_GetTick();
hsc->RxXferSize = Size;
diff --git a/Src/stm32f2xx_hal_spi.c b/Src/stm32f2xx_hal_spi.c
index e5b2115..9ac73ea 100644
--- a/Src/stm32f2xx_hal_spi.c
+++ b/Src/stm32f2xx_hal_spi.c
@@ -934,6 +934,9 @@
*/
HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
{
+#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
uint32_t tickstart;
HAL_StatusTypeDef errorcode = HAL_OK;
@@ -1085,7 +1088,9 @@
}
/* Read CRC to Flush DR and RXNE flag */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
#endif /* USE_SPI_CRC */
@@ -1132,6 +1137,9 @@
uint32_t tmp_mode;
HAL_SPI_StateTypeDef tmp_state;
uint32_t tickstart;
+#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
/* Variable used to alternate Rx and Tx during transfer */
uint32_t txallowed = 1U;
@@ -1302,7 +1310,9 @@
goto error;
}
/* Read CRC */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
/* Check if CRC error occurred */
@@ -2720,6 +2730,9 @@
{
SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
uint32_t tickstart;
+#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
/* Init tickstart for timeout management*/
tickstart = HAL_GetTick();
@@ -2741,7 +2754,9 @@
SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
}
/* Read CRC */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
#endif /* USE_SPI_CRC */
@@ -2804,6 +2819,9 @@
{
SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
uint32_t tickstart;
+#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
+#endif /* USE_SPI_CRC */
/* Init tickstart for timeout management*/
tickstart = HAL_GetTick();
@@ -2824,7 +2842,9 @@
SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
}
/* Read CRC to Flush DR and RXNE flag */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
#endif /* USE_SPI_CRC */
@@ -3135,8 +3155,15 @@
*/
static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint8_t * ptmpreg8;
+ __IO uint8_t tmpreg8 = 0;
+
+ /* Initialize the 8bit temporary pointer */
+ ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
/* Read 8bit CRC to flush Data Register */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
/* Disable RXNE and ERR interrupt */
__HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
@@ -3226,8 +3253,12 @@
*/
static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint32_t tmpreg = 0U;
+
/* Read 16bit CRC to flush Data Register */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
/* Disable RXNE interrupt */
__HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
@@ -3282,8 +3313,15 @@
*/
static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint8_t * ptmpreg8;
+ __IO uint8_t tmpreg8 = 0;
+
+ /* Initialize the 8bit temporary pointer */
+ ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
/* Read 8bit CRC to flush Data Register */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
SPI_CloseRx_ISR(hspi);
}
@@ -3331,8 +3369,12 @@
*/
static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint32_t tmpreg = 0U;
+
/* Read 16bit CRC to flush Data Register */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
/* Disable RXNE and ERR interrupt */
__HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
@@ -3765,6 +3807,7 @@
*/
static void SPI_AbortRx_ISR(SPI_HandleTypeDef *hspi)
{
+ __IO uint32_t tmpreg = 0U;
__IO uint32_t count = SPI_DEFAULT_TIMEOUT * (SystemCoreClock / 24U / 1000U);
/* Wait until TXE flag is set */
@@ -3784,8 +3827,10 @@
/* Disable TXEIE, RXNEIE and ERRIE(mode fault event, overrun error, TI frame error) interrupts */
CLEAR_BIT(hspi->Instance->CR2, (SPI_CR2_TXEIE | SPI_CR2_RXNEIE | SPI_CR2_ERRIE));
- /* Read CRC to flush Data Register */
- READ_REG(hspi->Instance->DR);
+ /* Flush Data Register by a blank read */
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
hspi->State = HAL_SPI_STATE_ABORT;
}
diff --git a/Src/stm32f2xx_hal_sram.c b/Src/stm32f2xx_hal_sram.c
index 4193453..c9e99c1 100644
--- a/Src/stm32f2xx_hal_sram.c
+++ b/Src/stm32f2xx_hal_sram.c
@@ -127,9 +127,6 @@
* @{
*/
-/**
- @cond 0
- */
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
@@ -138,9 +135,6 @@
static void SRAM_DMACplt(DMA_HandleTypeDef *hdma);
static void SRAM_DMACpltProt(DMA_HandleTypeDef *hdma);
static void SRAM_DMAError(DMA_HandleTypeDef *hdma);
-/**
- @endcond
- */
/* Exported functions --------------------------------------------------------*/
@@ -197,7 +191,7 @@
#else
/* Initialize the low level hardware (MSP) */
HAL_SRAM_MspInit(hsram);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
}
/* Initialize SRAM control Interface */
@@ -238,7 +232,7 @@
#else
/* De-Initialize the low level hardware (MSP) */
HAL_SRAM_MspDeInit(hsram);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
/* Configure the SRAM registers with their reset values */
(void)FSMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank);
@@ -909,7 +903,7 @@
__HAL_UNLOCK(hsram);
return status;
}
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
/**
* @}
@@ -1037,9 +1031,6 @@
*/
/**
- @cond 0
- */
-/**
* @brief DMA SRAM process complete callback.
* @param hdma : DMA handle
* @retval None
@@ -1058,7 +1049,7 @@
hsram->DmaXferCpltCallback(hdma);
#else
HAL_SRAM_DMA_XferCpltCallback(hdma);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
}
/**
@@ -1080,7 +1071,7 @@
hsram->DmaXferCpltCallback(hdma);
#else
HAL_SRAM_DMA_XferCpltCallback(hdma);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
}
/**
@@ -1102,11 +1093,8 @@
hsram->DmaXferErrorCallback(hdma);
#else
HAL_SRAM_DMA_XferErrorCallback(hdma);
-#endif
+#endif /* USE_HAL_SRAM_REGISTER_CALLBACKS */
}
-/**
- @endcond
- */
/**
* @}
diff --git a/Src/stm32f2xx_hal_tim.c b/Src/stm32f2xx_hal_tim.c
index 6eb8a2f..83537a7 100644
--- a/Src/stm32f2xx_hal_tim.c
+++ b/Src/stm32f2xx_hal_tim.c
@@ -558,7 +558,8 @@
htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1071,7 +1072,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1092,7 +1094,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1113,7 +1116,8 @@
htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1133,7 +1137,8 @@
htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1707,7 +1712,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1728,7 +1734,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1748,7 +1755,8 @@
htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1768,7 +1776,8 @@
htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -2322,6 +2331,23 @@
return HAL_ERROR;
}
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
switch (Channel)
{
case TIM_CHANNEL_1:
@@ -2334,7 +2360,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -2354,7 +2381,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -2374,7 +2402,8 @@
htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -2394,7 +2423,8 @@
htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -2408,23 +2438,6 @@
break;
}
- /* Enable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
- if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
- {
- tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
- if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
- {
- __HAL_TIM_ENABLE(htim);
- }
- }
- else
- {
- __HAL_TIM_ENABLE(htim);
- }
-
/* Return function status */
return HAL_OK;
}
@@ -2679,11 +2692,12 @@
/**
* @brief Starts the TIM One Pulse signal generation.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2715,7 +2729,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
No need to enable the counter, it's enabled automatically by hardware
(the counter starts in response to a stimulus and generate a pulse */
@@ -2735,11 +2749,12 @@
/**
* @brief Stops the TIM One Pulse signal generation.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be disable
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2751,7 +2766,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
@@ -2777,11 +2792,12 @@
/**
* @brief Starts the TIM One Pulse signal generation in interrupt mode.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2813,7 +2829,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
No need to enable the counter, it's enabled automatically by hardware
(the counter starts in response to a stimulus and generate a pulse */
@@ -2839,11 +2855,12 @@
/**
* @brief Stops the TIM One Pulse signal generation in interrupt mode.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2861,7 +2878,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
@@ -3544,7 +3561,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -3569,7 +3587,8 @@
/* Set the DMA error callback */
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -3595,7 +3614,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -3609,7 +3629,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -5924,111 +5945,138 @@
switch (CallbackID)
{
case HAL_TIM_BASE_MSPINIT_CB_ID :
- htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */
+ /* Legacy weak Base MspInit Callback */
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
break;
case HAL_TIM_BASE_MSPDEINIT_CB_ID :
- htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */
+ /* Legacy weak Base Msp DeInit Callback */
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
break;
case HAL_TIM_IC_MSPINIT_CB_ID :
- htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */
+ /* Legacy weak IC Msp Init Callback */
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
break;
case HAL_TIM_IC_MSPDEINIT_CB_ID :
- htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */
+ /* Legacy weak IC Msp DeInit Callback */
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
break;
case HAL_TIM_OC_MSPINIT_CB_ID :
- htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */
+ /* Legacy weak OC Msp Init Callback */
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspInit;
break;
case HAL_TIM_OC_MSPDEINIT_CB_ID :
- htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */
+ /* Legacy weak OC Msp DeInit Callback */
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
break;
case HAL_TIM_PWM_MSPINIT_CB_ID :
- htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */
+ /* Legacy weak PWM Msp Init Callback */
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
break;
case HAL_TIM_PWM_MSPDEINIT_CB_ID :
- htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */
+ /* Legacy weak PWM Msp DeInit Callback */
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
break;
case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
- htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */
+ /* Legacy weak One Pulse Msp Init Callback */
+ htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit;
break;
case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
- htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */
+ /* Legacy weak One Pulse Msp DeInit Callback */
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
break;
case HAL_TIM_ENCODER_MSPINIT_CB_ID :
- htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */
+ /* Legacy weak Encoder Msp Init Callback */
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
break;
case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
- htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */
+ /* Legacy weak Encoder Msp DeInit Callback */
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
break;
case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
- htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */
+ /* Legacy weak Hall Sensor Msp Init Callback */
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
break;
case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
- htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */
+ /* Legacy weak Hall Sensor Msp DeInit Callback */
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
break;
case HAL_TIM_PERIOD_ELAPSED_CB_ID :
- htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak Period Elapsed Callback */
+ /* Legacy weak Period Elapsed Callback */
+ htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback;
break;
case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID :
- htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak Period Elapsed half complete Callback */
+ /* Legacy weak Period Elapsed half complete Callback */
+ htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback;
break;
case HAL_TIM_TRIGGER_CB_ID :
- htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak Trigger Callback */
+ /* Legacy weak Trigger Callback */
+ htim->TriggerCallback = HAL_TIM_TriggerCallback;
break;
case HAL_TIM_TRIGGER_HALF_CB_ID :
- htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak Trigger half complete Callback */
+ /* Legacy weak Trigger half complete Callback */
+ htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback;
break;
case HAL_TIM_IC_CAPTURE_CB_ID :
- htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC Capture Callback */
+ /* Legacy weak IC Capture Callback */
+ htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback;
break;
case HAL_TIM_IC_CAPTURE_HALF_CB_ID :
- htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC Capture half complete Callback */
+ /* Legacy weak IC Capture half complete Callback */
+ htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback;
break;
case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
- htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC Delay Elapsed Callback */
+ /* Legacy weak OC Delay Elapsed Callback */
+ htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback;
break;
case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
- htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM Pulse Finished Callback */
+ /* Legacy weak PWM Pulse Finished Callback */
+ htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback;
break;
case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID :
- htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM Pulse Finished half complete Callback */
+ /* Legacy weak PWM Pulse Finished half complete Callback */
+ htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback;
break;
case HAL_TIM_ERROR_CB_ID :
- htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak Error Callback */
+ /* Legacy weak Error Callback */
+ htim->ErrorCallback = HAL_TIM_ErrorCallback;
break;
case HAL_TIM_COMMUTATION_CB_ID :
- htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak Commutation Callback */
+ /* Legacy weak Commutation Callback */
+ htim->CommutationCallback = HAL_TIMEx_CommutCallback;
break;
case HAL_TIM_COMMUTATION_HALF_CB_ID :
- htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak Commutation half complete Callback */
+ /* Legacy weak Commutation half complete Callback */
+ htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback;
break;
case HAL_TIM_BREAK_CB_ID :
- htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak Break Callback */
+ /* Legacy weak Break Callback */
+ htim->BreakCallback = HAL_TIMEx_BreakCallback;
break;
default :
@@ -6042,59 +6090,73 @@
switch (CallbackID)
{
case HAL_TIM_BASE_MSPINIT_CB_ID :
- htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */
+ /* Legacy weak Base MspInit Callback */
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
break;
case HAL_TIM_BASE_MSPDEINIT_CB_ID :
- htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */
+ /* Legacy weak Base Msp DeInit Callback */
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
break;
case HAL_TIM_IC_MSPINIT_CB_ID :
- htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */
+ /* Legacy weak IC Msp Init Callback */
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
break;
case HAL_TIM_IC_MSPDEINIT_CB_ID :
- htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */
+ /* Legacy weak IC Msp DeInit Callback */
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
break;
case HAL_TIM_OC_MSPINIT_CB_ID :
- htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */
+ /* Legacy weak OC Msp Init Callback */
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspInit;
break;
case HAL_TIM_OC_MSPDEINIT_CB_ID :
- htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */
+ /* Legacy weak OC Msp DeInit Callback */
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
break;
case HAL_TIM_PWM_MSPINIT_CB_ID :
- htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */
+ /* Legacy weak PWM Msp Init Callback */
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
break;
case HAL_TIM_PWM_MSPDEINIT_CB_ID :
- htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */
+ /* Legacy weak PWM Msp DeInit Callback */
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
break;
case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
- htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */
+ /* Legacy weak One Pulse Msp Init Callback */
+ htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit;
break;
case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
- htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */
+ /* Legacy weak One Pulse Msp DeInit Callback */
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
break;
case HAL_TIM_ENCODER_MSPINIT_CB_ID :
- htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */
+ /* Legacy weak Encoder Msp Init Callback */
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
break;
case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
- htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */
+ /* Legacy weak Encoder Msp DeInit Callback */
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
break;
case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
- htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */
+ /* Legacy weak Hall Sensor Msp Init Callback */
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
break;
case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
- htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */
+ /* Legacy weak Hall Sensor Msp DeInit Callback */
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
break;
default :
@@ -7393,19 +7455,19 @@
void TIM_ResetCallback(TIM_HandleTypeDef *htim)
{
/* Reset the TIM callback to the legacy weak callbacks */
- htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak PeriodElapsedCallback */
- htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak PeriodElapsedHalfCpltCallback */
- htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak TriggerCallback */
- htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak TriggerHalfCpltCallback */
- htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC_CaptureCallback */
- htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC_CaptureHalfCpltCallback */
- htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC_DelayElapsedCallback */
- htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM_PulseFinishedCallback */
- htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM_PulseFinishedHalfCpltCallback */
- htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak ErrorCallback */
- htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak CommutationCallback */
- htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak CommutationHalfCpltCallback */
- htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak BreakCallback */
+ htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback;
+ htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback;
+ htim->TriggerCallback = HAL_TIM_TriggerCallback;
+ htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback;
+ htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback;
+ htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback;
+ htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback;
+ htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback;
+ htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback;
+ htim->ErrorCallback = HAL_TIM_ErrorCallback;
+ htim->CommutationCallback = HAL_TIMEx_CommutCallback;
+ htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback;
+ htim->BreakCallback = HAL_TIMEx_BreakCallback;
}
#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
diff --git a/Src/stm32f2xx_hal_tim_ex.c b/Src/stm32f2xx_hal_tim_ex.c
index 392e953..d5d0900 100644
--- a/Src/stm32f2xx_hal_tim_ex.c
+++ b/Src/stm32f2xx_hal_tim_ex.c
@@ -54,10 +54,13 @@
the commutation event).
(#) Activate the TIM peripheral using one of the start functions:
- (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT()
- (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+ (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(),
+ HAL_TIMEx_OCN_Start_IT()
+ (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(),
+ HAL_TIMEx_PWMN_Start_IT()
(++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
- (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+ (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(),
+ HAL_TIMEx_HallSensor_Start_IT().
@endverbatim
******************************************************************************
@@ -335,7 +338,8 @@
TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
/* Enable the Input Capture channel 1
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
/* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
@@ -367,7 +371,8 @@
assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
/* Disable the Input Capture channels 1, 2 and 3
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
/* Disable the Peripheral */
@@ -418,7 +423,8 @@
__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
/* Enable the Input Capture channel 1
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
/* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
@@ -450,7 +456,8 @@
assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
/* Disable the Input Capture channel 1
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
/* Disable the capture compare Interrupts event */
@@ -510,7 +517,8 @@
}
/* Enable the Input Capture channel 1
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
/* Set the DMA Input Capture 1 Callbacks */
@@ -557,7 +565,8 @@
assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
/* Disable the Input Capture channel 1
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
@@ -886,7 +895,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -906,7 +916,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -926,7 +937,8 @@
htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1343,7 +1355,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1363,7 +1376,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1383,7 +1397,8 @@
htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA stream */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1508,8 +1523,10 @@
/**
* @brief Starts the TIM One Pulse signal generation on the complementary
* output.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be enabled
+ * @param OutputChannel pulse output channel to enable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1518,22 +1535,28 @@
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
{
uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
- HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel);
- HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel);
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
/* Check the parameters */
assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
/* Check the TIM channels state */
- if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY)
- || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
/* Enable the complementary One Pulse output channel and the Input Capture channel */
TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
@@ -1549,8 +1572,10 @@
/**
* @brief Stops the TIM One Pulse signal generation on the complementary
* output.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be disabled
+ * @param OutputChannel pulse output channel to disable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1574,8 +1599,10 @@
__HAL_TIM_DISABLE(htim);
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
/* Return function status */
return HAL_OK;
@@ -1584,8 +1611,10 @@
/**
* @brief Starts the TIM One Pulse signal generation in interrupt mode on the
* complementary channel.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be enabled
+ * @param OutputChannel pulse output channel to enable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1594,22 +1623,28 @@
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
{
uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
- HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel);
- HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel);
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
/* Check the parameters */
assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
/* Check the TIM channels state */
- if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY)
- || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
/* Enable the TIM Capture/Compare 1 interrupt */
__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
@@ -1631,8 +1666,10 @@
/**
* @brief Stops the TIM One Pulse signal generation in interrupt mode on the
* complementary channel.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be disabled
+ * @param OutputChannel pulse output channel to disable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1662,8 +1699,10 @@
__HAL_TIM_DISABLE(htim);
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
/* Return function status */
return HAL_OK;
diff --git a/Src/stm32f2xx_hal_timebase_tim_template.c b/Src/stm32f2xx_hal_timebase_tim_template.c
index 829b757..d3807a0 100644
--- a/Src/stm32f2xx_hal_timebase_tim_template.c
+++ b/Src/stm32f2xx_hal_timebase_tim_template.c
@@ -6,7 +6,7 @@
*
* This file override the native HAL time base functions (defined as weak)
* the TIM time base:
- * + Intializes the TIM peripheral generate a Period elapsed Event each 1ms
+ * + Initializes the TIM peripheral generate a Period elapsed Event each 1ms
* + HAL_IncTick is called inside HAL_TIM_PeriodElapsedCallback ie each 1ms
*
******************************************************************************
diff --git a/Src/stm32f2xx_hal_uart.c b/Src/stm32f2xx_hal_uart.c
index 71b1288..48bab2c 100644
--- a/Src/stm32f2xx_hal_uart.c
+++ b/Src/stm32f2xx_hal_uart.c
@@ -21,7 +21,7 @@
(##) Enable the USARTx interface clock.
(##) UART pins configuration:
(+++) Enable the clock for the UART GPIOs.
- (+++) Configure these UART pins (TX as alternate function pull-up, RX as alternate function Input).
+ (+++) Configure the UART TX/RX pins as alternate function pull-up.
(##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT()
and HAL_UART_Receive_IT() APIs):
(+++) Configure the USARTx interrupt priority.
@@ -105,6 +105,10 @@
(+) MspDeInitCallback : UART MspDeInit.
[..]
+ For specific callback RxEventCallback, use dedicated registration/reset functions:
+ respectively @ref HAL_UART_RegisterRxEventCallback() , @ref HAL_UART_UnRegisterRxEventCallback().
+
+ [..]
By default, after the @ref HAL_UART_Init() and when the state is HAL_UART_STATE_RESET
all callbacks are set to the corresponding weak (surcharged) functions:
examples @ref HAL_UART_TxCpltCallback(), @ref HAL_UART_RxHalfCpltCallback().
@@ -168,6 +172,40 @@
(+) Resume the DMA Transfer using HAL_UART_DMAResume()
(+) Stop the DMA Transfer using HAL_UART_DMAStop()
+
+ [..] This subsection also provides a set of additional functions providing enhanced reception
+ services to user. (For example, these functions allow application to handle use cases
+ where number of data to be received is unknown).
+
+ (#) Compared to standard reception services which only consider number of received
+ data elements as reception completion criteria, these functions also consider additional events
+ as triggers for updating reception status to caller :
+ (+) Detection of inactivity period (RX line has not been active for a given period).
+ (++) RX inactivity detected by IDLE event, i.e. RX line has been in idle state (normally high state)
+ for 1 frame time, after last received byte.
+
+ (#) There are two mode of transfer:
+ (+) Blocking mode: The reception is performed in polling mode, until either expected number of data is received,
+ or till IDLE event occurs. Reception is handled only during function execution.
+ When function exits, no data reception could occur. HAL status and number of actually received data elements,
+ are returned by function after finishing transfer.
+ (+) Non-Blocking mode: The reception is performed using Interrupts or DMA.
+ These API's return the HAL status.
+ The end of the data processing will be indicated through the
+ dedicated UART IRQ when using Interrupt mode or the DMA IRQ when using DMA mode.
+ The HAL_UARTEx_RxEventCallback() user callback will be executed during Receive process
+ The HAL_UART_ErrorCallback()user callback will be executed when a reception error is detected.
+
+ (#) Blocking mode API:
+ (+) HAL_UARTEx_ReceiveToIdle()
+
+ (#) Non-Blocking mode API with Interrupt:
+ (+) HAL_UARTEx_ReceiveToIdle_IT()
+
+ (#) Non-Blocking mode API with DMA:
+ (+) HAL_UARTEx_ReceiveToIdle_DMA()
+
+
*** UART HAL driver macros list ***
=============================================
[..]
@@ -186,7 +224,7 @@
@endverbatim
[..]
- (@) Additionnal remark: If the parity is enabled, then the MSB bit of the data written
+ (@) Additional remark: If the parity is enabled, then the MSB bit of the data written
in the data register is transmitted but is changed by the parity bit.
Depending on the frame length defined by the M bit (8-bits or 9-bits),
the possible UART frame formats are as listed in the following table:
@@ -647,6 +685,7 @@
huart->ErrorCode = HAL_UART_ERROR_NONE;
huart->gState = HAL_UART_STATE_RESET;
huart->RxState = HAL_UART_STATE_RESET;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* Process Unlock */
__HAL_UNLOCK(huart);
@@ -920,6 +959,73 @@
return status;
}
+
+/**
+ * @brief Register a User UART Rx Event Callback
+ * To be used instead of the weak predefined callback
+ * @param huart Uart handle
+ * @param pCallback Pointer to the Rx Event Callback function
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_RegisterRxEventCallback(UART_HandleTypeDef *huart, pUART_RxEventCallbackTypeDef pCallback)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ if (pCallback == NULL)
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK;
+
+ return HAL_ERROR;
+ }
+
+ /* Process locked */
+ __HAL_LOCK(huart);
+
+ if (huart->gState == HAL_UART_STATE_READY)
+ {
+ huart->RxEventCallback = pCallback;
+ }
+ else
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK;
+
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(huart);
+
+ return status;
+}
+
+/**
+ * @brief UnRegister the UART Rx Event Callback
+ * UART Rx Event Callback is redirected to the weak HAL_UARTEx_RxEventCallback() predefined callback
+ * @param huart Uart handle
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UART_UnRegisterRxEventCallback(UART_HandleTypeDef *huart)
+{
+ HAL_StatusTypeDef status = HAL_OK;
+
+ /* Process locked */
+ __HAL_LOCK(huart);
+
+ if (huart->gState == HAL_UART_STATE_READY)
+ {
+ huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak UART Rx Event Callback */
+ }
+ else
+ {
+ huart->ErrorCode |= HAL_UART_ERROR_INVALID_CALLBACK;
+
+ status = HAL_ERROR;
+ }
+
+ /* Release Lock */
+ __HAL_UNLOCK(huart);
+ return status;
+}
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
@@ -985,6 +1091,9 @@
(+) HAL_UART_AbortTransmitCpltCallback()
(+) HAL_UART_AbortReceiveCpltCallback()
+ (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced reception services:
+ (+) HAL_UARTEx_RxEventCallback()
+
(#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
Errors are handled as follows :
(+) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is
@@ -1035,7 +1144,7 @@
huart->ErrorCode = HAL_UART_ERROR_NONE;
huart->gState = HAL_UART_STATE_BUSY_TX;
- /* Init tickstart for timeout managment */
+ /* Init tickstart for timeout management */
tickstart = HAL_GetTick();
huart->TxXferSize = Size;
@@ -1122,8 +1231,9 @@
huart->ErrorCode = HAL_UART_ERROR_NONE;
huart->RxState = HAL_UART_STATE_BUSY_RX;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
- /* Init tickstart for timeout managment */
+ /* Init tickstart for timeout management */
tickstart = HAL_GetTick();
huart->RxXferSize = Size;
@@ -1251,26 +1361,10 @@
/* Process Locked */
__HAL_LOCK(huart);
- huart->pRxBuffPtr = pData;
- huart->RxXferSize = Size;
- huart->RxXferCount = Size;
+ /* Set Reception type to Standard reception */
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->RxState = HAL_UART_STATE_BUSY_RX;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- /* Enable the UART Parity Error Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_PE);
-
- /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
-
- /* Enable the UART Data Register not empty Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE);
-
- return HAL_OK;
+ return(UART_Start_Receive_IT(huart, pData, Size));
}
else
{
@@ -1359,8 +1453,6 @@
*/
HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
{
- uint32_t *tmp;
-
/* Check that a Rx process is not already ongoing */
if (huart->RxState == HAL_UART_STATE_READY)
{
@@ -1372,45 +1464,10 @@
/* Process Locked */
__HAL_LOCK(huart);
- huart->pRxBuffPtr = pData;
- huart->RxXferSize = Size;
+ /* Set Reception type to Standard reception */
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->RxState = HAL_UART_STATE_BUSY_RX;
-
- /* Set the UART DMA transfer complete callback */
- huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
-
- /* Set the UART DMA Half transfer complete callback */
- huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
-
- /* Set the DMA error callback */
- huart->hdmarx->XferErrorCallback = UART_DMAError;
-
- /* Set the DMA abort callback */
- huart->hdmarx->XferAbortCallback = NULL;
-
- /* Enable the DMA stream */
- tmp = (uint32_t *)&pData;
- HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t *)tmp, Size);
-
- /* Clear the Overrun flag just before enabling the DMA Rx request: can be mandatory for the second transfer */
- __HAL_UART_CLEAR_OREFLAG(huart);
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- /* Enable the UART Parity Error Interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
-
- /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
-
- /* Enable the DMA transfer for the receiver request by setting the DMAR bit
- in the UART CR3 register */
- SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
-
- return HAL_OK;
+ return(UART_Start_Receive_DMA(huart, pData, Size));
}
else
{
@@ -1477,7 +1534,7 @@
/* Clear the Overrun flag before resuming the Rx transfer*/
__HAL_UART_CLEAR_OREFLAG(huart);
- /* Reenable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ /* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */
SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
@@ -1538,6 +1595,253 @@
}
/**
+ * @brief Receive an amount of data in blocking mode till either the expected number of data is received or an IDLE event occurs.
+ * @note HAL_OK is returned if reception is completed (expected number of data has been received)
+ * or if reception is stopped after IDLE event (less than the expected number of data has been received)
+ * In this case, RxLen output parameter indicates number of data available in reception buffer.
+ * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M = 01),
+ * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
+ * of uint16_t available through pData.
+ * @param huart UART handle.
+ * @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
+ * @param Size Amount of data elements (uint8_t or uint16_t) to be received.
+ * @param RxLen Number of data elements finally received (could be lower than Size, in case reception ends on IDLE event)
+ * @param Timeout Timeout duration expressed in ms (covers the whole reception sequence).
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout)
+{
+ uint8_t *pdata8bits;
+ uint16_t *pdata16bits;
+ uint32_t tickstart;
+
+ /* Check that a Rx process is not already ongoing */
+ if (huart->RxState == HAL_UART_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ __HAL_LOCK(huart);
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+ huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE;
+
+ /* Init tickstart for timeout management */
+ tickstart = HAL_GetTick();
+
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+
+ /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+ {
+ pdata8bits = NULL;
+ pdata16bits = (uint16_t *) pData;
+ }
+ else
+ {
+ pdata8bits = pData;
+ pdata16bits = NULL;
+ }
+
+ __HAL_UNLOCK(huart);
+
+ /* Initialize output number of received elements */
+ *RxLen = 0U;
+
+ /* as long as data have to be received */
+ while (huart->RxXferCount > 0U)
+ {
+ /* Check if IDLE flag is set */
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE))
+ {
+ /* Clear IDLE flag in ISR */
+ __HAL_UART_CLEAR_IDLEFLAG(huart);
+
+ /* If Set, but no data ever received, clear flag without exiting loop */
+ /* If Set, and data has already been received, this means Idle Event is valid : End reception */
+ if (*RxLen > 0U)
+ {
+ huart->RxState = HAL_UART_STATE_READY;
+
+ return HAL_OK;
+ }
+ }
+
+ /* Check if RXNE flag is set */
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE))
+ {
+ if (pdata8bits == NULL)
+ {
+ *pdata16bits = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF);
+ pdata16bits++;
+ }
+ else
+ {
+ if ((huart->Init.WordLength == UART_WORDLENGTH_9B) || ((huart->Init.WordLength == UART_WORDLENGTH_8B) && (huart->Init.Parity == UART_PARITY_NONE)))
+ {
+ *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF);
+ }
+ else
+ {
+ *pdata8bits = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F);
+ }
+
+ pdata8bits++;
+ }
+ /* Increment number of received elements */
+ *RxLen += 1U;
+ huart->RxXferCount--;
+ }
+
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
+ {
+ huart->RxState = HAL_UART_STATE_READY;
+
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ /* Set number of received elements in output parameter : RxLen */
+ *RxLen = huart->RxXferSize - huart->RxXferCount;
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+
+ return HAL_OK;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in interrupt mode till either the expected number of data is received or an IDLE event occurs.
+ * @note Reception is initiated by this function call. Further progress of reception is achieved thanks
+ * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating
+ * number of received data elements.
+ * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M = 01),
+ * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
+ * of uint16_t available through pData.
+ * @param huart UART handle.
+ * @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
+ * @param Size Amount of data elements (uint8_t or uint16_t) to be received.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef status;
+
+ /* Check that a Rx process is not already ongoing */
+ if (huart->RxState == HAL_UART_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ __HAL_LOCK(huart);
+
+ /* Set Reception type to reception till IDLE Event*/
+ huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE;
+
+ status = UART_Start_Receive_IT(huart, pData, Size);
+
+ /* Check Rx process has been successfully started */
+ if (status == HAL_OK)
+ {
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ __HAL_UART_CLEAR_IDLEFLAG(huart);
+ SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ }
+ else
+ {
+ /* In case of errors already pending when reception is started,
+ Interrupts may have already been raised and lead to reception abortion.
+ (Overrun error for instance).
+ In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */
+ status = HAL_ERROR;
+ }
+ }
+
+ return status;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
+ * @brief Receive an amount of data in DMA mode till either the expected number of data is received or an IDLE event occurs.
+ * @note Reception is initiated by this function call. Further progress of reception is achieved thanks
+ * to DMA services, transferring automatically received data elements in user reception buffer and
+ * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider
+ * reception phase as ended. In all cases, callback execution will indicate number of received data elements.
+ * @note When the UART parity is enabled (PCE = 1), the received data contain
+ * the parity bit (MSB position).
+ * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M = 01),
+ * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
+ * of uint16_t available through pData.
+ * @param huart UART handle.
+ * @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
+ * @param Size Amount of data elements (uint8_t or uint16_t) to be received.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ HAL_StatusTypeDef status;
+
+ /* Check that a Rx process is not already ongoing */
+ if (huart->RxState == HAL_UART_STATE_READY)
+ {
+ if ((pData == NULL) || (Size == 0U))
+ {
+ return HAL_ERROR;
+ }
+
+ __HAL_LOCK(huart);
+
+ /* Set Reception type to reception till IDLE Event*/
+ huart->ReceptionType = HAL_UART_RECEPTION_TOIDLE;
+
+ status = UART_Start_Receive_DMA(huart, pData, Size);
+
+ /* Check Rx process has been successfully started */
+ if (status == HAL_OK)
+ {
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ __HAL_UART_CLEAR_IDLEFLAG(huart);
+ SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ }
+ else
+ {
+ /* In case of errors already pending when reception is started,
+ Interrupts may have already been raised and lead to reception abortion.
+ (Overrun error for instance).
+ In such case Reception Type has been reset to HAL_UART_RECEPTION_STANDARD. */
+ status = HAL_ERROR;
+ }
+ }
+
+ return status;
+ }
+ else
+ {
+ return HAL_BUSY;
+ }
+}
+
+/**
* @brief Abort ongoing transfers (blocking mode).
* @param huart UART handle.
* @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode.
@@ -1555,6 +1859,12 @@
CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE));
CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ }
+
/* Disable the UART DMA Tx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT))
{
@@ -1615,6 +1925,7 @@
/* Restore huart->RxState and huart->gState to Ready */
huart->RxState = HAL_UART_STATE_READY;
huart->gState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
return HAL_OK;
}
@@ -1688,6 +1999,12 @@
CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ }
+
/* Disable the UART DMA Rx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
{
@@ -1718,6 +2035,7 @@
/* Restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
return HAL_OK;
}
@@ -1744,6 +2062,12 @@
CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE));
CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ }
+
/* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised
before any call to DMA Abort functions */
/* DMA Tx Handle is valid */
@@ -1836,6 +2160,7 @@
/* Restore huart->gState and huart->RxState to Ready */
huart->gState = HAL_UART_STATE_READY;
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* As no DMA to be aborted, call directly user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -1947,6 +2272,12 @@
CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ /* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ }
+
/* Disable the UART DMA Rx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
{
@@ -1973,6 +2304,7 @@
/* Restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* As no DMA to be aborted, call directly user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -1991,6 +2323,7 @@
/* Restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* As no DMA to be aborted, call directly user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -2136,6 +2469,90 @@
return;
} /* End if some error occurs */
+ /* Check current reception Mode :
+ If Reception till IDLE event has been selected : */
+ if ( (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ &&((isrflags & USART_SR_IDLE) != 0U)
+ &&((cr1its & USART_SR_IDLE) != 0U))
+ {
+ __HAL_UART_CLEAR_IDLEFLAG(huart);
+
+ /* Check if DMA mode is enabled in UART */
+ if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
+ {
+ /* DMA mode enabled */
+ /* Check received length : If all expected data are received, do nothing,
+ (DMA cplt callback will be called).
+ Otherwise, if at least one data has already been received, IDLE event is to be notified to user */
+ uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx);
+ if ( (nb_remaining_rx_data > 0U)
+ &&(nb_remaining_rx_data < huart->RxXferSize))
+ {
+ /* Reception is not complete */
+ huart->RxXferCount = nb_remaining_rx_data;
+
+ /* In Normal mode, end DMA xfer and HAL UART Rx process*/
+ if (huart->hdmarx->Init.Mode != DMA_CIRCULAR)
+ {
+ /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Disable the DMA transfer for the receiver request by resetting the DMAR bit
+ in the UART CR3 register */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ /* At end of Rx process, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
+
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+
+ /* Last bytes received, so no need as the abort is immediate */
+ (void)HAL_DMA_Abort(huart->hdmarx);
+ }
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx Event callback*/
+ huart->RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount));
+#else
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount));
+#endif
+ }
+ return;
+ }
+ else
+ {
+ /* DMA mode not enabled */
+ /* Check received length : If all expected data are received, do nothing.
+ Otherwise, if at least one data has already been received, IDLE event is to be notified to user */
+ uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount;
+ if ( (huart->RxXferCount > 0U)
+ &&(nb_rx_data > 0U) )
+ {
+ /* Disable the UART Parity Error Interrupt and RXNE interrupts */
+ CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
+
+ /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Rx process is completed, restore huart->RxState to Ready */
+ huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
+
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx complete callback*/
+ huart->RxEventCallback(huart, nb_rx_data);
+#else
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, nb_rx_data);
+#endif
+ }
+ return;
+ }
+ }
+
/* UART in mode Transmitter ------------------------------------------------*/
if (((isrflags & USART_SR_TXE) != RESET) && ((cr1its & USART_CR1_TXEIE) != RESET))
{
@@ -2272,6 +2689,24 @@
}
/**
+ * @brief Reception Event Callback (Rx event notification called after use of advanced reception service).
+ * @param huart UART handle
+ * @param Size Number of data available in application reception buffer (indicates a position in
+ * reception buffer until which, data are available)
+ * @retval None
+ */
+__weak void HAL_UARTEx_RxEventCallback(UART_HandleTypeDef *huart, uint16_t Size)
+{
+ /* Prevent unused argument(s) compilation warning */
+ UNUSED(huart);
+ UNUSED(Size);
+
+ /* NOTE : This function should not be modified, when the callback is needed,
+ the HAL_UARTEx_RxEventCallback can be implemented in the user file.
+ */
+}
+
+/**
* @}
*/
@@ -2522,6 +2957,7 @@
huart->AbortCpltCallback = HAL_UART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
huart->AbortTransmitCpltCallback = HAL_UART_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */
huart->AbortReceiveCpltCallback = HAL_UART_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */
+ huart->RxEventCallback = HAL_UARTEx_RxEventCallback; /* Legacy weak RxEventCallback */
}
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
@@ -2604,14 +3040,37 @@
/* At end of Rx process, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+
+ /* If Reception till IDLE event has been selected, Disable IDLE Interrupt */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ }
}
+
+ /* Check current reception Mode :
+ If Reception till IDLE event has been selected : use Rx Event callback */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
- /*Call registered Rx complete callback*/
- huart->RxCpltCallback(huart);
+ /*Call registered Rx Event callback*/
+ huart->RxEventCallback(huart, huart->RxXferSize);
#else
- /*Call legacy weak Rx complete callback*/
- HAL_UART_RxCpltCallback(huart);
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ /* In other cases : use Rx Complete callback */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx complete callback*/
+ huart->RxCpltCallback(huart);
+#else
+ /*Call legacy weak Rx complete callback*/
+ HAL_UART_RxCpltCallback(huart);
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
}
/**
@@ -2624,13 +3083,29 @@
{
UART_HandleTypeDef *huart = (UART_HandleTypeDef *)((DMA_HandleTypeDef *)hdma)->Parent;
+ /* Check current reception Mode :
+ If Reception till IDLE event has been selected : use Rx Event callback */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
- /*Call registered Rx Half complete callback*/
- huart->RxHalfCpltCallback(huart);
+ /*Call registered Rx Event callback*/
+ huart->RxEventCallback(huart, huart->RxXferSize/2U);
#else
- /*Call legacy weak Rx Half complete callback*/
- HAL_UART_RxHalfCpltCallback(huart);
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize/2U);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
+ else
+ {
+ /* In other cases : use Rx Half Complete callback */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx Half complete callback*/
+ huart->RxHalfCpltCallback(huart);
+#else
+ /*Call legacy weak Rx Half complete callback*/
+ HAL_UART_RxHalfCpltCallback(huart);
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
}
/**
@@ -2708,6 +3183,97 @@
}
/**
+ * @brief Start Receive operation in interrupt mode.
+ * @note This function could be called by all HAL UART API providing reception in Interrupt mode.
+ * @note When calling this function, parameters validity is considered as already checked,
+ * i.e. Rx State, buffer address, ...
+ * UART Handle is assumed as Locked.
+ * @param huart UART handle.
+ * @param pData Pointer to data buffer (u8 or u16 data elements).
+ * @param Size Amount of data elements (u8 or u16) to be received.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef UART_Start_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+ huart->RxXferCount = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Parity Error Interrupt */
+ __HAL_UART_ENABLE_IT(huart, UART_IT_PE);
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
+
+ /* Enable the UART Data Register not empty Interrupt */
+ __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Start Receive operation in DMA mode.
+ * @note This function could be called by all HAL UART API providing reception in DMA mode.
+ * @note When calling this function, parameters validity is considered as already checked,
+ * i.e. Rx State, buffer address, ...
+ * UART Handle is assumed as Locked.
+ * @param huart UART handle.
+ * @param pData Pointer to data buffer (u8 or u16 data elements).
+ * @param Size Amount of data elements (u8 or u16) to be received.
+ * @retval HAL status
+ */
+HAL_StatusTypeDef UART_Start_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+ uint32_t *tmp;
+
+ huart->pRxBuffPtr = pData;
+ huart->RxXferSize = Size;
+
+ huart->ErrorCode = HAL_UART_ERROR_NONE;
+ huart->RxState = HAL_UART_STATE_BUSY_RX;
+
+ /* Set the UART DMA transfer complete callback */
+ huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
+
+ /* Set the UART DMA Half transfer complete callback */
+ huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
+
+ /* Set the DMA error callback */
+ huart->hdmarx->XferErrorCallback = UART_DMAError;
+
+ /* Set the DMA abort callback */
+ huart->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the DMA stream */
+ tmp = (uint32_t *)&pData;
+ HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t *)tmp, Size);
+
+ /* Clear the Overrun flag just before enabling the DMA Rx request: can be mandatory for the second transfer */
+ __HAL_UART_CLEAR_OREFLAG(huart);
+
+ /* Process Unlocked */
+ __HAL_UNLOCK(huart);
+
+ /* Enable the UART Parity Error Interrupt */
+ SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+
+ /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+ SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+
+ /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+ in the UART CR3 register */
+ SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+
+ return HAL_OK;
+}
+
+/**
* @brief End ongoing Tx transfer on UART peripheral (following error detection or Transmit completion).
* @param huart UART handle.
* @retval None
@@ -2732,8 +3298,15 @@
CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE | USART_CR1_PEIE));
CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ /* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ }
+
/* At end of Rx process, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
}
/**
@@ -2792,6 +3365,7 @@
/* Restore huart->gState and huart->RxState to Ready */
huart->gState = HAL_UART_STATE_READY;
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* Call user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -2837,6 +3411,7 @@
/* Restore huart->gState and huart->RxState to Ready */
huart->gState = HAL_UART_STATE_READY;
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* Call user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -2893,6 +3468,7 @@
/* Restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
/* Call user Abort complete callback */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
@@ -3020,13 +3596,42 @@
/* Rx process is completed, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
+ /* Check current reception Mode :
+ If Reception till IDLE event has been selected : */
+ if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ {
+ /* Set reception type to Standard */
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
+
+ /* Disable IDLE interrupt */
+ CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+
+ /* Check if IDLE flag is set */
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE))
+ {
+ /* Clear IDLE flag in ISR */
+ __HAL_UART_CLEAR_IDLEFLAG(huart);
+ }
+
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
- /*Call registered Rx complete callback*/
- huart->RxCpltCallback(huart);
+ /*Call registered Rx Event callback*/
+ huart->RxEventCallback(huart, huart->RxXferSize);
#else
- /*Call legacy weak Rx complete callback*/
- HAL_UART_RxCpltCallback(huart);
+ /*Call legacy weak Rx Event callback*/
+ HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize);
+#endif
+ }
+ else
+ {
+ /* Standard reception API called */
+#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
+ /*Call registered Rx complete callback*/
+ huart->RxCpltCallback(huart);
+#else
+ /*Call legacy weak Rx complete callback*/
+ HAL_UART_RxCpltCallback(huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+ }
return HAL_OK;
}
diff --git a/Src/stm32f2xx_hal_usart.c b/Src/stm32f2xx_hal_usart.c
index 32ced80..7bb5ad9 100644
--- a/Src/stm32f2xx_hal_usart.c
+++ b/Src/stm32f2xx_hal_usart.c
@@ -166,7 +166,7 @@
@endverbatim
[..]
- (@) Additionnal remark: If the parity is enabled, then the MSB bit of the data written
+ (@) Additional remark: If the parity is enabled, then the MSB bit of the data written
in the data register is transmitted but is changed by the parity bit.
Depending on the frame length defined by the M bit (8-bits or 9-bits),
the possible USART frame formats are as listed in the following table:
@@ -742,8 +742,9 @@
*/
HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout)
{
- uint16_t *tmp;
- uint32_t tickstart = 0U;
+ uint8_t *ptxdata8bits;
+ uint16_t *ptxdata16bits;
+ uint32_t tickstart;
if (husart->State == HAL_USART_STATE_READY)
{
@@ -763,35 +764,38 @@
husart->TxXferSize = Size;
husart->TxXferCount = Size;
+
+ /* In case of 9bits/No Parity transfer, pTxData needs to be handled as a uint16_t pointer */
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+ {
+ ptxdata8bits = NULL;
+ ptxdata16bits = (uint16_t *) pTxData;
+ }
+ else
+ {
+ ptxdata8bits = pTxData;
+ ptxdata16bits = NULL;
+ }
+
while (husart->TxXferCount > 0U)
{
- husart->TxXferCount--;
- if (husart->Init.WordLength == USART_WORDLENGTH_9B)
+ /* Wait for TXE flag in order to write data in DR */
+ if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
{
- /* Wait for TC flag in order to write data in DR */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t *) pTxData;
- husart->Instance->DR = (*tmp & (uint16_t)0x01FF);
- if (husart->Init.Parity == USART_PARITY_NONE)
- {
- pTxData += 2U;
- }
- else
- {
- pTxData += 1U;
- }
+ return HAL_TIMEOUT;
+ }
+ if (ptxdata8bits == NULL)
+ {
+ husart->Instance->DR = (uint16_t)(*ptxdata16bits & (uint16_t)0x01FF);
+ ptxdata16bits++;
}
else
{
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- husart->Instance->DR = (*pTxData++ & (uint8_t)0xFF);
+ husart->Instance->DR = (uint8_t)(*ptxdata8bits & (uint8_t)0xFF);
+ ptxdata8bits++;
}
+
+ husart->TxXferCount--;
}
if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, tickstart, Timeout) != HAL_OK)
@@ -827,8 +831,9 @@
*/
HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
{
- uint16_t *tmp;
- uint32_t tickstart = 0U;
+ uint8_t *prxdata8bits;
+ uint16_t *prxdata16bits;
+ uint32_t tickstart;
if (husart->State == HAL_USART_STATE_READY)
{
@@ -847,65 +852,56 @@
husart->RxXferSize = Size;
husart->RxXferCount = Size;
+
+ /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+ {
+ prxdata8bits = NULL;
+ prxdata16bits = (uint16_t *) pRxData;
+ }
+ else
+ {
+ prxdata8bits = pRxData;
+ prxdata16bits = NULL;
+ }
+
/* Check the remain data to be received */
while (husart->RxXferCount > 0U)
{
- husart->RxXferCount--;
- if (husart->Init.WordLength == USART_WORDLENGTH_9B)
+ /* Wait until TXE flag is set to send dummy byte in order to generate the
+ * clock for the slave to send data.
+ * Whatever the frame length (7, 8 or 9-bit long), the same dummy value
+ * can be written for all the cases. */
+ if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
{
- /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Send dummy byte in order to generate clock */
- husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FF);
+ return HAL_TIMEOUT;
+ }
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x0FF);
- /* Wait for RXNE Flag */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t *) pRxData ;
- if (husart->Init.Parity == USART_PARITY_NONE)
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
- pRxData += 2U;
- }
- else
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
- pRxData += 1U;
- }
+ /* Wait until RXNE flag is set to receive the byte */
+ if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
+ {
+ return HAL_TIMEOUT;
+ }
+
+ if (prxdata8bits == NULL)
+ {
+ *prxdata16bits = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
+ prxdata16bits++;
}
else
{
- /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) || ((husart->Init.WordLength == USART_WORDLENGTH_8B) && (husart->Init.Parity == USART_PARITY_NONE)))
{
- return HAL_TIMEOUT;
- }
-
- /* Send Dummy Byte in order to generate clock */
- husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FF);
-
- /* Wait until RXNE flag is set to receive the byte */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- if (husart->Init.Parity == USART_PARITY_NONE)
- {
- /* Receive data */
- *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
+ *prxdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x0FF);
}
else
{
- /* Receive data */
- *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
+ *prxdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x07F);
}
-
+ prxdata8bits++;
}
+ husart->RxXferCount--;
}
husart->State = HAL_USART_STATE_READY;
@@ -936,8 +932,12 @@
*/
HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
{
- uint16_t *tmp;
- uint32_t tickstart = 0U;
+ uint8_t *prxdata8bits;
+ uint16_t *prxdata16bits;
+ uint8_t *ptxdata8bits;
+ uint16_t *ptxdata16bits;
+ uint16_t rxdatacount;
+ uint32_t tickstart;
if (husart->State == HAL_USART_STATE_READY)
{
@@ -945,6 +945,17 @@
{
return HAL_ERROR;
}
+
+ /* In case of 9bits/No Parity transfer, pTxData and pRxData buffers provided as input parameter
+ should be aligned on a u16 frontier, as data to be filled into TDR/retrieved from RDR will be
+ handled through a u16 cast. */
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+ {
+ if (((((uint32_t)pTxData) & 1U) != 0U) || ((((uint32_t)pRxData) & 1U) != 0U))
+ {
+ return HAL_ERROR;
+ }
+ }
/* Process Locked */
__HAL_LOCK(husart);
@@ -959,71 +970,78 @@
husart->TxXferCount = Size;
husart->RxXferCount = Size;
- /* Check the remain data to be received */
- while (husart->TxXferCount > 0U)
+ /* In case of 9bits/No Parity transfer, pRxData needs to be handled as a uint16_t pointer */
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
{
- husart->TxXferCount--;
- husart->RxXferCount--;
- if (husart->Init.WordLength == USART_WORDLENGTH_9B)
+ prxdata8bits = NULL;
+ ptxdata8bits = NULL;
+ ptxdata16bits = (uint16_t *) pTxData;
+ prxdata16bits = (uint16_t *) pRxData;
+ }
+ else
+ {
+ prxdata8bits = pRxData;
+ ptxdata8bits = pTxData;
+ ptxdata16bits = NULL;
+ prxdata16bits = NULL;
+ }
+
+ /* Check the remain data to be received */
+ /* rxdatacount is a temporary variable for MISRAC2012-Rule-13.5 */
+ rxdatacount = husart->RxXferCount;
+ while ((husart->TxXferCount > 0U) || (rxdatacount > 0U))
+ {
+ if (husart->TxXferCount > 0U)
{
- /* Wait for TC flag in order to write data in DR */
+ /* Wait for TXE flag in order to write data in DR */
if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
{
return HAL_TIMEOUT;
}
- tmp = (uint16_t *) pTxData;
- husart->Instance->DR = (*tmp & (uint16_t)0x01FF);
- if (husart->Init.Parity == USART_PARITY_NONE)
+
+ if (ptxdata8bits == NULL)
{
- pTxData += 2U;
+ husart->Instance->DR = (uint16_t)(*ptxdata16bits & (uint16_t)0x01FF);
+ ptxdata16bits++;
}
else
{
- pTxData += 1U;
+ husart->Instance->DR = (uint8_t)(*ptxdata8bits & (uint8_t)0xFF);
+ ptxdata8bits++;
}
+ husart->TxXferCount--;
+ }
+
+ if (husart->RxXferCount > 0U)
+ {
/* Wait for RXNE Flag */
if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
{
return HAL_TIMEOUT;
}
- tmp = (uint16_t *) pRxData ;
- if (husart->Init.Parity == USART_PARITY_NONE)
+ if (prxdata8bits == NULL)
{
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
- pRxData += 2U;
+ *prxdata16bits = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
+ prxdata16bits++;
}
else
{
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
- pRxData += 1U;
- }
- }
- else
- {
- /* Wait for TC flag in order to write data in DR */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- husart->Instance->DR = (*pTxData++ & (uint8_t)0x00FF);
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) || ((husart->Init.WordLength == USART_WORDLENGTH_8B) && (husart->Init.Parity == USART_PARITY_NONE)))
+ {
+ *prxdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x0FF);
+ }
+ else
+ {
+ *prxdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x07F);
+ }
- /* Wait for RXNE Flag */
- if (USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
+ prxdata8bits++;
}
- if (husart->Init.Parity == USART_PARITY_NONE)
- {
- /* Receive data */
- *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
- }
- else
- {
- /* Receive data */
- *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
- }
+
+ husart->RxXferCount--;
}
+ rxdatacount = husart->RxXferCount;
}
husart->State = HAL_USART_STATE_READY;
@@ -2456,18 +2474,11 @@
if (husart->State == HAL_USART_STATE_BUSY_TX)
{
- if (husart->Init.WordLength == USART_WORDLENGTH_9B)
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
{
tmp = (uint16_t *) husart->pTxBuffPtr;
husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
- if (husart->Init.Parity == USART_PARITY_NONE)
- {
- husart->pTxBuffPtr += 2U;
- }
- else
- {
- husart->pTxBuffPtr += 1U;
- }
+ husart->pTxBuffPtr += 2U;
}
else
{
@@ -2525,46 +2536,37 @@
*/
static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart)
{
- uint16_t *tmp;
+ uint8_t *pdata8bits;
+ uint16_t *pdata16bits;
+
if (husart->State == HAL_USART_STATE_BUSY_RX)
{
- if (husart->Init.WordLength == USART_WORDLENGTH_9B)
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
{
- tmp = (uint16_t *) husart->pRxBuffPtr;
- if (husart->Init.Parity == USART_PARITY_NONE)
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
- husart->pRxBuffPtr += 2U;
- }
- else
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
- husart->pRxBuffPtr += 1U;
- }
- if (--husart->RxXferCount != 0x00U)
- {
- /* Send dummy byte in order to generate the clock for the slave to send the next data */
- husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FF);
- }
+ pdata8bits = NULL;
+ pdata16bits = (uint16_t *) husart->pRxBuffPtr;
+ *pdata16bits = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
+ husart->pRxBuffPtr += 2U;
}
else
{
- if (husart->Init.Parity == USART_PARITY_NONE)
+ pdata8bits = (uint8_t *) husart->pRxBuffPtr;
+ pdata16bits = NULL;
+
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) || ((husart->Init.WordLength == USART_WORDLENGTH_8B) && (husart->Init.Parity == USART_PARITY_NONE)))
{
- *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
+ *pdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
}
else
{
- *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
+ *pdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
}
- if (--husart->RxXferCount != 0x00U)
- {
- /* Send dummy byte in order to generate the clock for the slave to send the next data */
- husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FF);
- }
+ husart->pRxBuffPtr += 1U;
}
+ husart->RxXferCount--;
+
if (husart->RxXferCount == 0U)
{
/* Disable the USART RXNE Interrupt */
@@ -2587,6 +2589,13 @@
return HAL_OK;
}
+ else
+ {
+ /* Send dummy byte in order to generate the clock for the slave to send the next data.
+ * Whatever the frame length (7, 8 or 9-bit long), the same dummy value
+ * can be written for all the cases. */
+ husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x0FF);
+ }
return HAL_OK;
}
else
@@ -2603,7 +2612,8 @@
*/
static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart)
{
- uint16_t *tmp;
+ uint8_t *pdata8bits;
+ uint16_t *pdata16bits;
if (husart->State == HAL_USART_STATE_BUSY_TX_RX)
{
@@ -2611,23 +2621,18 @@
{
if (__HAL_USART_GET_FLAG(husart, USART_FLAG_TXE) != RESET)
{
- if (husart->Init.WordLength == USART_WORDLENGTH_9B)
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
{
- tmp = (uint16_t *) husart->pTxBuffPtr;
- husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
- if (husart->Init.Parity == USART_PARITY_NONE)
- {
- husart->pTxBuffPtr += 2U;
- }
- else
- {
- husart->pTxBuffPtr += 1U;
- }
+ pdata8bits = NULL;
+ pdata16bits = (uint16_t *) husart->pTxBuffPtr;
+ husart->Instance->DR = (uint16_t)(*pdata16bits & (uint16_t)0x01FF);
+ husart->pTxBuffPtr += 2U;
}
else
{
husart->Instance->DR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FF);
}
+
husart->TxXferCount--;
/* Check the latest data transmitted */
@@ -2642,31 +2647,28 @@
{
if (__HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE) != RESET)
{
- if (husart->Init.WordLength == USART_WORDLENGTH_9B)
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
{
- tmp = (uint16_t *) husart->pRxBuffPtr;
- if (husart->Init.Parity == USART_PARITY_NONE)
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
- husart->pRxBuffPtr += 2U;
- }
- else
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
- husart->pRxBuffPtr += 1U;
- }
+ pdata8bits = NULL;
+ pdata16bits = (uint16_t *) husart->pRxBuffPtr;
+ *pdata16bits = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
+ husart->pRxBuffPtr += 2U;
}
else
{
- if (husart->Init.Parity == USART_PARITY_NONE)
+ pdata8bits = (uint8_t *) husart->pRxBuffPtr;
+ pdata16bits = NULL;
+ if ((husart->Init.WordLength == USART_WORDLENGTH_9B) || ((husart->Init.WordLength == USART_WORDLENGTH_8B) && (husart->Init.Parity == USART_PARITY_NONE)))
{
- *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
+ *pdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
}
else
{
- *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
+ *pdata8bits = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
}
+ husart->pRxBuffPtr += 1U;
}
+
husart->RxXferCount--;
}
}
diff --git a/Src/stm32f2xx_ll_adc.c b/Src/stm32f2xx_ll_adc.c
index f455cbb..0f9d25d 100644
--- a/Src/stm32f2xx_ll_adc.c
+++ b/Src/stm32f2xx_ll_adc.c
@@ -344,7 +344,7 @@
/* Note: Hardware constraint (refer to description of functions */
/* "LL_ADC_SetCommonXXX()" and "LL_ADC_SetMultiXXX()"): */
- /* On this STM32 serie, setting of these features is conditioned to */
+ /* On this STM32 series, setting of these features is conditioned to */
/* ADC state: */
/* All ADC instances of the ADC common group must be disabled. */
if(__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0U)
@@ -531,7 +531,12 @@
( ADC_SQR2_SQ12 | ADC_SQR2_SQ11 | ADC_SQR2_SQ10
| ADC_SQR2_SQ9 | ADC_SQR2_SQ8 | ADC_SQR2_SQ7)
);
-
+
+ /* Reset register SQR3 */
+ CLEAR_BIT(ADCx->SQR3,
+ ( ADC_SQR3_SQ6 | ADC_SQR3_SQ5 | ADC_SQR3_SQ4
+ | ADC_SQR3_SQ3 | ADC_SQR3_SQ2 | ADC_SQR3_SQ1)
+ );
/* Reset register JSQR */
CLEAR_BIT(ADCx->JSQR,
@@ -713,7 +718,7 @@
/* - Set ADC group regular continuous mode */
/* - Set ADC group regular conversion data transfer: no transfer or */
/* transfer by DMA, and DMA requests mode */
- /* Note: On this STM32 serie, ADC trigger edge is set when starting */
+ /* Note: On this STM32 series, ADC trigger edge is set when starting */
/* ADC conversion. */
/* Refer to function @ref LL_ADC_REG_StartConversionExtTrig(). */
if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
@@ -776,7 +781,7 @@
{
/* Set ADC_REG_InitStruct fields to default values */
/* Set fields of ADC group regular */
- /* Note: On this STM32 serie, ADC trigger edge is set when starting */
+ /* Note: On this STM32 series, ADC trigger edge is set when starting */
/* ADC conversion. */
/* Refer to function @ref LL_ADC_REG_StartConversionExtTrig(). */
ADC_REG_InitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE;
@@ -843,7 +848,7 @@
/* - Set ADC group injected sequencer discontinuous mode */
/* - Set ADC group injected conversion trigger: independent or */
/* from ADC group regular */
- /* Note: On this STM32 serie, ADC trigger edge is set when starting */
+ /* Note: On this STM32 series, ADC trigger edge is set when starting */
/* ADC conversion. */
/* Refer to function @ref LL_ADC_INJ_StartConversionExtTrig(). */
if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
diff --git a/Src/stm32f2xx_ll_crc.c b/Src/stm32f2xx_ll_crc.c
index b078f6d..ca32175 100644
--- a/Src/stm32f2xx_ll_crc.c
+++ b/Src/stm32f2xx_ll_crc.c
@@ -26,7 +26,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif/* USE_FULL_ASSERT */
/** @addtogroup STM32F2xx_LL_Driver
* @{
diff --git a/Src/stm32f2xx_ll_dac.c b/Src/stm32f2xx_ll_dac.c
index 81c4ddd..fcac7ad 100644
--- a/Src/stm32f2xx_ll_dac.c
+++ b/Src/stm32f2xx_ll_dac.c
@@ -26,7 +26,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32F2xx_LL_Driver
* @{
@@ -46,10 +46,9 @@
/** @addtogroup DAC_LL_Private_Macros
* @{
*/
-#define IS_LL_DAC_CHANNEL(__DAC_CHANNEL__) \
- ( \
- ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_1) \
- || ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_2) \
+#define IS_LL_DAC_CHANNEL(__DAC_CHANNEL__) \
+ ( ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_1) \
+ || ((__DAC_CHANNEL__) == LL_DAC_CHANNEL_2) \
)
#define IS_LL_DAC_TRIGGER_SOURCE(__TRIGGER_SOURCE__) \
@@ -63,46 +62,46 @@
|| ((__TRIGGER_SOURCE__) == LL_DAC_TRIG_EXT_EXTI_LINE9) \
)
-#define IS_LL_DAC_WAVE_AUTO_GENER_MODE(__WAVE_AUTO_GENERATION_MODE__) \
- ( ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NONE) \
- || ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NOISE) \
- || ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE) \
+#define IS_LL_DAC_WAVE_AUTO_GENER_MODE(__WAVE_AUTO_GENERATION_MODE__) \
+ ( ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NONE) \
+ || ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NOISE) \
+ || ((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE) \
)
#define IS_LL_DAC_WAVE_AUTO_GENER_CONFIG(__WAVE_AUTO_GENERATION_MODE__, __WAVE_AUTO_GENERATION_CONFIG__) \
( (((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_NOISE) \
- && ( ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BIT0) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS1_0) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS2_0) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS3_0) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS4_0) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS5_0) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS6_0) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS7_0) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS8_0) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS9_0) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS10_0) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS11_0)) \
+ && ( ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BIT0) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS1_0) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS2_0) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS3_0) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS4_0) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS5_0) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS6_0) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS7_0) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS8_0) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS9_0) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS10_0) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_NOISE_LFSR_UNMASK_BITS11_0)) \
) \
- ||(((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE) \
- && ( ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_1) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_3) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_7) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_15) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_31) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_63) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_127) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_255) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_511) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_1023) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_2047) \
- || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_4095)) \
- ) \
+ ||(((__WAVE_AUTO_GENERATION_MODE__) == LL_DAC_WAVE_AUTO_GENERATION_TRIANGLE) \
+ && ( ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_1) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_3) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_7) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_15) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_31) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_63) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_127) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_255) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_511) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_1023) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_2047) \
+ || ((__WAVE_AUTO_GENERATION_CONFIG__) == LL_DAC_TRIANGLE_AMPLITUDE_4095)) \
+ ) \
)
#define IS_LL_DAC_OUTPUT_BUFFER(__OUTPUT_BUFFER__) \
( ((__OUTPUT_BUFFER__) == LL_DAC_OUTPUT_BUFFER_ENABLE) \
- || ((__OUTPUT_BUFFER__) == LL_DAC_OUTPUT_BUFFER_DISABLE) \
+ || ((__OUTPUT_BUFFER__) == LL_DAC_OUTPUT_BUFFER_DISABLE) \
)
/**
@@ -186,7 +185,7 @@
/* Note: Hardware constraint (refer to description of this function) */
/* DAC instance must be disabled. */
- if (LL_DAC_IsEnabled(DACx, DAC_Channel) == 0U)
+ if (LL_DAC_IsEnabled(DACx, DAC_Channel) == 0UL)
{
/* Configuration of DAC channel: */
/* - TriggerSource */
diff --git a/Src/stm32f2xx_ll_fsmc.c b/Src/stm32f2xx_ll_fsmc.c
index fa66c96..cdd530b 100644
--- a/Src/stm32f2xx_ll_fsmc.c
+++ b/Src/stm32f2xx_ll_fsmc.c
@@ -59,7 +59,7 @@
/** @addtogroup STM32F2xx_HAL_Driver
* @{
*/
-#if (((defined HAL_NOR_MODULE_ENABLED || defined HAL_SRAM_MODULE_ENABLED)) || defined HAL_NAND_MODULE_ENABLED || defined HAL_PCCARD_MODULE_ENABLED )
+#if defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_SRAM_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED)
/** @defgroup FSMC_LL FSMC Low Layer
* @brief FSMC driver modules
@@ -87,14 +87,9 @@
/* --- BWTR Register ---*/
/* BWTR register clear mask */
-#if defined(FSMC_BWTR1_BUSTURN)
#define BWTR_CLEAR_MASK ((uint32_t)(FSMC_BWTR1_ADDSET | FSMC_BWTR1_ADDHLD |\
FSMC_BWTR1_DATAST | FSMC_BWTR1_BUSTURN |\
FSMC_BWTR1_ACCMOD))
-#else
-#define BWTR_CLEAR_MASK ((uint32_t)(FSMC_BWTR1_ADDSET | FSMC_BWTR1_ADDHLD |\
- FSMC_BWTR1_DATAST | FSMC_BWTR1_ACCMOD))
-#endif /* FSMC_BWTR1_BUSTURN */
/* --- PCR Register ---*/
/* PCR register clear mask */
@@ -353,7 +348,8 @@
* @retval HAL status
*/
HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device,
- FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
+ FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank,
+ uint32_t ExtendedMode)
{
/* Check the parameters */
assert_param(IS_FSMC_EXTENDED_MODE(ExtendedMode));
@@ -366,9 +362,7 @@
assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
-#if defined(FSMC_BWTR1_BUSTURN)
assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
-#endif /* FSMC_BWTR1_BUSTURN */
assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
assert_param(IS_FSMC_NORSRAM_BANK(Bank));
@@ -376,12 +370,8 @@
MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime |
((Timing->AddressHoldTime) << FSMC_BWTR1_ADDHLD_Pos) |
((Timing->DataSetupTime) << FSMC_BWTR1_DATAST_Pos) |
-#if defined(FSMC_BWTR1_BUSTURN)
Timing->AccessMode |
((Timing->BusTurnAroundDuration) << FSMC_BWTR1_BUSTURN_Pos)));
-#else
- Timing->AccessMode));
-#endif /* FSMC_BWTR1_BUSTURN */
}
else
{
@@ -833,9 +823,11 @@
{
/* Check the parameters */
assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+#if defined(FSMC_BANK3)
assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
+#endif /* FSMC_BANK3 */
/* Set FSMC_PCCARD device control parameters */
MODIFY_REG(Device->PCR4,
@@ -865,10 +857,12 @@
{
/* Check the parameters */
assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+#if defined(FSMC_BANK3)
assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+#endif /* FSMC_BANK3 */
/* Set PCCARD timing parameters */
MODIFY_REG(Device->PMEM4, PMEM4_CLEAR_MASK,
@@ -892,10 +886,12 @@
{
/* Check the parameters */
assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+#if defined(FSMC_BANK3)
assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+#endif /* FSMC_BANK3 */
/* Set PCCARD timing parameters */
MODIFY_REG(Device->PATT4, PATT4_CLEAR_MASK,
@@ -919,10 +915,12 @@
{
/* Check the parameters */
assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+#if defined(FSMC_BANK3)
assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+#endif /* FSMC_BANK3 */
/* Set FSMC_PCCARD device timing parameters */
MODIFY_REG(Device->PIO4, PIO4_CLEAR_MASK,
diff --git a/Src/stm32f2xx_ll_rng.c b/Src/stm32f2xx_ll_rng.c
index 17e1042..8072c23 100644
--- a/Src/stm32f2xx_ll_rng.c
+++ b/Src/stm32f2xx_ll_rng.c
@@ -26,7 +26,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32F2xx_LL_Driver
* @{
diff --git a/Src/stm32f2xx_ll_rtc.c b/Src/stm32f2xx_ll_rtc.c
index 7f3a777..ef2b441 100644
--- a/Src/stm32f2xx_ll_rtc.c
+++ b/Src/stm32f2xx_ll_rtc.c
@@ -88,18 +88,7 @@
#define IS_LL_RTC_DAY(__DAY__) (((__DAY__) >= 1U) && ((__DAY__) <= 31U))
-#define IS_LL_RTC_MONTH(__VALUE__) (((__VALUE__) == LL_RTC_MONTH_JANUARY) \
- || ((__VALUE__) == LL_RTC_MONTH_FEBRUARY) \
- || ((__VALUE__) == LL_RTC_MONTH_MARCH) \
- || ((__VALUE__) == LL_RTC_MONTH_APRIL) \
- || ((__VALUE__) == LL_RTC_MONTH_MAY) \
- || ((__VALUE__) == LL_RTC_MONTH_JUNE) \
- || ((__VALUE__) == LL_RTC_MONTH_JULY) \
- || ((__VALUE__) == LL_RTC_MONTH_AUGUST) \
- || ((__VALUE__) == LL_RTC_MONTH_SEPTEMBER) \
- || ((__VALUE__) == LL_RTC_MONTH_OCTOBER) \
- || ((__VALUE__) == LL_RTC_MONTH_NOVEMBER) \
- || ((__VALUE__) == LL_RTC_MONTH_DECEMBER))
+#define IS_LL_RTC_MONTH(__MONTH__) (((__MONTH__) >= 1U) && ((__MONTH__) <= 12U))
#define IS_LL_RTC_YEAR(__YEAR__) ((__YEAR__) <= 99U)
@@ -322,7 +311,7 @@
}
/* Exit Initialization mode */
- LL_RTC_DisableInitMode(RTC);
+ LL_RTC_DisableInitMode(RTCx);
status = SUCCESS;
}
@@ -402,7 +391,7 @@
}
/* Exit Initialization mode */
- LL_RTC_DisableInitMode(RTC);
+ LL_RTC_DisableInitMode(RTCx);
status = SUCCESS;
}
diff --git a/Src/stm32f2xx_ll_sdmmc.c b/Src/stm32f2xx_ll_sdmmc.c
index b060eae..2dd5440 100644
--- a/Src/stm32f2xx_ll_sdmmc.c
+++ b/Src/stm32f2xx_ll_sdmmc.c
@@ -511,7 +511,7 @@
*/
/**
- * @brief Send the Data Block Lenght command and check the response
+ * @brief Send the Data Block Length command and check the response
* @param SDIOx: Pointer to SDIO register base
* @retval HAL status
*/
@@ -1099,7 +1099,7 @@
}
/**
- * @brief Checks switchable function and switch card function. SDMMC_CMD_HS_SWITCH comand
+ * @brief Checks switchable function and switch card function. SDMMC_CMD_HS_SWITCH command
* @param SDIOx: Pointer to SDIO register base
* @parame Argument: Argument used for the command
* @retval HAL status
@@ -1142,7 +1142,7 @@
{
/* 8 is the number of required instructions cycles for the below loop statement.
The SDIO_CMDTIMEOUT is expressed in ms */
- register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U);
+ uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U);
do
{
@@ -1172,7 +1172,7 @@
/* 8 is the number of required instructions cycles for the below loop statement.
The Timeout is expressed in ms */
- register uint32_t count = Timeout * (SystemCoreClock / 8U /1000U);
+ uint32_t count = Timeout * (SystemCoreClock / 8U /1000U);
do
{
@@ -1305,7 +1305,7 @@
uint32_t sta_reg;
/* 8 is the number of required instructions cycles for the below loop statement.
The SDIO_CMDTIMEOUT is expressed in ms */
- register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U);
+ uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U);
do
{
@@ -1349,7 +1349,7 @@
uint32_t sta_reg;
/* 8 is the number of required instructions cycles for the below loop statement.
The SDIO_CMDTIMEOUT is expressed in ms */
- register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U);
+ uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U);
do
{
@@ -1391,7 +1391,7 @@
/* 8 is the number of required instructions cycles for the below loop statement.
The SDIO_CMDTIMEOUT is expressed in ms */
- register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U);
+ uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U);
do
{
@@ -1462,7 +1462,7 @@
uint32_t sta_reg;
/* 8 is the number of required instructions cycles for the below loop statement.
The SDIO_CMDTIMEOUT is expressed in ms */
- register uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U);
+ uint32_t count = SDIO_CMDTIMEOUT * (SystemCoreClock / 8U /1000U);
do
{
@@ -1504,6 +1504,32 @@
}
/**
+ * @brief Send the Send EXT_CSD command and check the response.
+ * @param SDIOx: Pointer to SDMMC register base
+ * @param Argument: Command Argument
+ * @retval HAL status
+ */
+uint32_t SDMMC_CmdSendEXTCSD(SDIO_TypeDef *SDIOx, uint32_t Argument)
+{
+ SDIO_CmdInitTypeDef sdmmc_cmdinit;
+ uint32_t errorstate;
+
+ /* Send CMD9 SEND_CSD */
+ sdmmc_cmdinit.Argument = Argument;
+ sdmmc_cmdinit.CmdIndex = SDMMC_CMD_HS_SEND_EXT_CSD;
+ sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT;
+ sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO;
+ sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE;
+ (void)SDIO_SendCommand(SDIOx, &sdmmc_cmdinit);
+
+ /* Check for error conditions */
+ errorstate = SDMMC_GetCmdResp1(SDIOx, SDMMC_CMD_HS_SEND_EXT_CSD,SDIO_CMDTIMEOUT);
+
+ return errorstate;
+}
+
+
+/**
* @}
*/
diff --git a/Src/stm32f2xx_ll_tim.c b/Src/stm32f2xx_ll_tim.c
index d7862da..7cba09a 100644
--- a/Src/stm32f2xx_ll_tim.c
+++ b/Src/stm32f2xx_ll_tim.c
@@ -296,7 +296,8 @@
/**
* @brief Configure the TIMx time base unit.
* @param TIMx Timer Instance
- * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (TIMx time base unit configuration data structure)
+ * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure
+ * (TIMx time base unit configuration data structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: TIMx registers are de-initialized
* - ERROR: not applicable
@@ -349,7 +350,8 @@
/**
* @brief Set the fields of the TIMx output channel configuration data
* structure to their default values.
- * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (the output channel configuration data structure)
+ * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure
+ * (the output channel configuration data structure)
* @retval None
*/
void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct)
@@ -373,7 +375,8 @@
* @arg @ref LL_TIM_CHANNEL_CH2
* @arg @ref LL_TIM_CHANNEL_CH3
* @arg @ref LL_TIM_CHANNEL_CH4
- * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration data structure)
+ * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration
+ * data structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: TIMx output channel is initialized
* - ERROR: TIMx output channel is not initialized
@@ -406,7 +409,8 @@
/**
* @brief Set the fields of the TIMx input channel configuration data
* structure to their default values.
- * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration data structure)
+ * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration
+ * data structure)
* @retval None
*/
void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct)
@@ -426,7 +430,8 @@
* @arg @ref LL_TIM_CHANNEL_CH2
* @arg @ref LL_TIM_CHANNEL_CH3
* @arg @ref LL_TIM_CHANNEL_CH4
- * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data structure)
+ * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data
+ * structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: TIMx output channel is initialized
* - ERROR: TIMx output channel is not initialized
@@ -458,7 +463,8 @@
/**
* @brief Fills each TIM_EncoderInitStruct field with its default value
- * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface configuration data structure)
+ * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface
+ * configuration data structure)
* @retval None
*/
void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct)
@@ -478,7 +484,8 @@
/**
* @brief Configure the encoder interface of the timer instance.
* @param TIMx Timer Instance
- * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface configuration data structure)
+ * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface
+ * configuration data structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: TIMx registers are de-initialized
* - ERROR: not applicable
@@ -542,7 +549,8 @@
/**
* @brief Set the fields of the TIMx Hall sensor interface configuration data
* structure to their default values.
- * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (HALL sensor interface configuration data structure)
+ * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (HALL sensor interface
+ * configuration data structure)
* @retval None
*/
void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct)
@@ -569,7 +577,8 @@
* @note LL_TIM_IC_POLARITY_BOTHEDGE must not be used for TI1 when it is used
* when TIMx operates in Hall sensor interface mode.
* @param TIMx Timer Instance
- * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (TIMx HALL sensor interface configuration data structure)
+ * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (TIMx HALL sensor
+ * interface configuration data structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: TIMx registers are de-initialized
* - ERROR: not applicable
@@ -649,7 +658,8 @@
/**
* @brief Set the fields of the Break and Dead Time configuration data structure
* to their default values.
- * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration data structure)
+ * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration
+ * data structure)
* @retval None
*/
void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct)
@@ -672,7 +682,8 @@
* @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
* a timer instance provides a break input.
* @param TIMx Timer Instance
- * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration data structure)
+ * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration
+ * data structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Break and Dead Time is initialized
* - ERROR: not applicable
diff --git a/Src/stm32f2xx_ll_usart.c b/Src/stm32f2xx_ll_usart.c
index 9b1b753..f64707b 100644
--- a/Src/stm32f2xx_ll_usart.c
+++ b/Src/stm32f2xx_ll_usart.c
@@ -63,9 +63,6 @@
/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */
#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U)
-/* __VALUE__ BRR content must be lower than or equal to 0xFFFF. */
-#define IS_LL_USART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x0000FFFFU)
-
#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \
|| ((__VALUE__) == LL_USART_DIRECTION_RX) \
|| ((__VALUE__) == LL_USART_DIRECTION_TX) \
@@ -295,9 +292,6 @@
/* Check BRR is greater than or equal to 16d */
assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR));
-
- /* Check BRR is greater than or equal to 16d */
- assert_param(IS_LL_USART_BRR_MAX(USARTx->BRR));
}
}
/* Endif (=> USART not in Disabled state => return ERROR) */
diff --git a/Src/stm32f2xx_ll_usb.c b/Src/stm32f2xx_ll_usb.c
index e355ab2..6cbf9be 100644
--- a/Src/stm32f2xx_ll_usb.c
+++ b/Src/stm32f2xx_ll_usb.c
@@ -96,7 +96,8 @@
{
USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD;
}
- /* Reset after a PHY select */
+
+ /* Reset after a PHY select */
ret = USB_CoreReset(USBx);
}
else /* FS interface (embedded Phy) */
@@ -239,21 +240,39 @@
*/
HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx, USB_OTG_ModeTypeDef mode)
{
+ uint32_t ms = 0U;
+
USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD);
if (mode == USB_HOST_MODE)
{
USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD;
+
+ do
+ {
+ HAL_Delay(1U);
+ ms++;
+ } while ((USB_GetMode(USBx) != (uint32_t)USB_HOST_MODE) && (ms < 50U));
}
else if (mode == USB_DEVICE_MODE)
{
USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
+
+ do
+ {
+ HAL_Delay(1U);
+ ms++;
+ } while ((USB_GetMode(USBx) != (uint32_t)USB_DEVICE_MODE) && (ms < 50U));
}
else
{
return HAL_ERROR;
}
- HAL_Delay(50U);
+
+ if (ms == 50U)
+ {
+ return HAL_ERROR;
+ }
return HAL_OK;
}
@@ -485,8 +504,8 @@
* @param USBx Selected device
* @retval speed device speed
* This parameter can be one of these values:
- * @arg PCD_SPEED_HIGH: High speed mode
- * @arg PCD_SPEED_FULL: Full speed mode
+ * @arg USBD_HS_SPEED: High speed mode
+ * @arg USBD_FS_SPEED: Full speed mode
*/
uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
{
@@ -708,7 +727,9 @@
*/
USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
USBx_INEP(epnum)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
- USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket) << 19));
+ USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT &
+ (((ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket) << 19));
+
USBx_INEP(epnum)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
if (ep->type == EP_TYPE_ISOC)
@@ -929,8 +950,9 @@
uint8_t ch_ep_num, uint16_t len, uint8_t dma)
{
uint32_t USBx_BASE = (uint32_t)USBx;
- uint32_t *pSrc = (uint32_t *)src;
- uint32_t count32b, i;
+ uint8_t *pSrc = src;
+ uint32_t count32b;
+ uint32_t i;
if (dma == 0U)
{
@@ -939,6 +961,9 @@
{
USBx_DFIFO((uint32_t)ch_ep_num) = __UNALIGNED_UINT32_READ(pSrc);
pSrc++;
+ pSrc++;
+ pSrc++;
+ pSrc++;
}
}
@@ -955,14 +980,34 @@
void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len)
{
uint32_t USBx_BASE = (uint32_t)USBx;
- uint32_t *pDest = (uint32_t *)dest;
+ uint8_t *pDest = dest;
+ uint32_t pData;
uint32_t i;
- uint32_t count32b = ((uint32_t)len + 3U) / 4U;
+ uint32_t count32b = (uint32_t)len >> 2U;
+ uint16_t remaining_bytes = len % 4U;
for (i = 0U; i < count32b; i++)
{
__UNALIGNED_UINT32_WRITE(pDest, USBx_DFIFO(0U));
pDest++;
+ pDest++;
+ pDest++;
+ pDest++;
+ }
+
+ /* When Number of data is not word aligned, read the remaining byte */
+ if (remaining_bytes != 0U)
+ {
+ i = 0U;
+ __UNALIGNED_UINT32_WRITE(&pData, USBx_DFIFO(0U));
+
+ do
+ {
+ *(uint8_t *)pDest = (uint8_t)(pData >> (8U * (uint8_t)(i)));
+ i++;
+ pDest++;
+ remaining_bytes--;
+ } while (remaining_bytes != 0U);
}
return ((void *)pDest);
@@ -1194,7 +1239,9 @@
uint32_t USB_ReadDevInEPInterrupt(USB_OTG_GlobalTypeDef *USBx, uint8_t epnum)
{
uint32_t USBx_BASE = (uint32_t)USBx;
- uint32_t tmpreg, msk, emp;
+ uint32_t tmpreg;
+ uint32_t msk;
+ uint32_t emp;
msk = USBx_DEVICE->DIEPMSK;
emp = USBx_DEVICE->DIEPEMPMSK;
@@ -1367,11 +1414,6 @@
USBx_HC(i)->HCINTMSK = 0U;
}
- /* Enable VBUS driving */
- (void)USB_DriveVbus(USBx, 1U);
-
- HAL_Delay(200U);
-
/* Disable all interrupts. */
USBx->GINTMSK = 0U;
@@ -1546,7 +1588,7 @@
* @arg EP_TYPE_BULK: Bulk type
* @arg EP_TYPE_INTR: Interrupt type
* @param mps Max Packet Size
- * This parameter can be a value from 0 to32K
+ * This parameter can be a value from 0 to 32K
* @retval HAL state
*/
HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, uint8_t ch_num,
@@ -1555,7 +1597,9 @@
{
HAL_StatusTypeDef ret = HAL_OK;
uint32_t USBx_BASE = (uint32_t)USBx;
- uint32_t HCcharEpDir, HCcharLowSpeed;
+ uint32_t HCcharEpDir;
+ uint32_t HCcharLowSpeed;
+ uint32_t HostCoreSpeed;
/* Clear old interrupt conditions for this host channel. */
USBx_HC((uint32_t)ch_num)->HCINT = 0xFFFFFFFFU;
@@ -1580,7 +1624,8 @@
{
if ((USBx->CID & (0x1U << 8)) != 0U)
{
- USBx_HC((uint32_t)ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
+ USBx_HC((uint32_t)ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_NYET |
+ USB_OTG_HCINTMSK_ACKM;
}
}
break;
@@ -1634,7 +1679,10 @@
HCcharEpDir = 0U;
}
- if (speed == HPRT0_PRTSPD_LOW_SPEED)
+ HostCoreSpeed = USB_GetHostSpeed(USBx);
+
+ /* LS device plugged to HUB */
+ if ((speed == HPRT0_PRTSPD_LOW_SPEED) && (HostCoreSpeed != HPRT0_PRTSPD_LOW_SPEED))
{
HCcharLowSpeed = (0x1U << 17) & USB_OTG_HCCHAR_LSDEV;
}
@@ -1670,7 +1718,7 @@
{
uint32_t USBx_BASE = (uint32_t)USBx;
uint32_t ch_num = (uint32_t)hc->ch_num;
- static __IO uint32_t tmpreg = 0U;
+ __IO uint32_t tmpreg;
uint8_t is_oddframe;
uint16_t len_words;
uint16_t num_packets;
@@ -1678,20 +1726,20 @@
if (((USBx->CID & (0x1U << 8)) != 0U) && (hc->speed == USBH_HS_SPEED))
{
+ /* in DMA mode host Core automatically issues ping in case of NYET/NAK */
+ if ((dma == 1U) && ((hc->ep_type == EP_TYPE_CTRL) || (hc->ep_type == EP_TYPE_BULK)))
+ {
+ USBx_HC((uint32_t)ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET |
+ USB_OTG_HCINTMSK_ACKM |
+ USB_OTG_HCINTMSK_NAKM);
+ }
+
if ((dma == 0U) && (hc->do_ping == 1U))
{
(void)USB_DoPing(USBx, hc->ch_num);
return HAL_OK;
}
- else if (dma == 1U)
- {
- USBx_HC(ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
- hc->do_ping = 0U;
- }
- else
- {
- /* ... */
- }
+
}
/* Compute the expected number of packets associated to the transfer */
@@ -1702,20 +1750,29 @@
if (num_packets > max_hc_pkt_count)
{
num_packets = max_hc_pkt_count;
- hc->xfer_len = (uint32_t)num_packets * hc->max_packet;
+ hc->XferSize = (uint32_t)num_packets * hc->max_packet;
}
}
else
{
num_packets = 1U;
}
+
+ /*
+ * For IN channel HCTSIZ.XferSize is expected to be an integer multiple of
+ * max_packet size.
+ */
if (hc->ep_is_in != 0U)
{
- hc->xfer_len = (uint32_t)num_packets * hc->max_packet;
+ hc->XferSize = (uint32_t)num_packets * hc->max_packet;
+ }
+ else
+ {
+ hc->XferSize = hc->xfer_len;
}
/* Initialize the HCTSIZn register */
- USBx_HC(ch_num)->HCTSIZ = (hc->xfer_len & USB_OTG_HCTSIZ_XFRSIZ) |
+ USBx_HC(ch_num)->HCTSIZ = (hc->XferSize & USB_OTG_HCTSIZ_XFRSIZ) |
(((uint32_t)num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |
(((uint32_t)hc->data_pid << 29) & USB_OTG_HCTSIZ_DPID);
@@ -1816,28 +1873,38 @@
uint32_t hcnum = (uint32_t)hc_num;
uint32_t count = 0U;
uint32_t HcEpType = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_EPTYP) >> 18;
+ uint32_t ChannelEna = (USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) >> 31;
+
+ if (((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == USB_OTG_GAHBCFG_DMAEN) &&
+ (ChannelEna == 0U))
+ {
+ return HAL_OK;
+ }
/* Check for space in the request queue to issue the halt. */
if ((HcEpType == HCCHAR_CTRL) || (HcEpType == HCCHAR_BULK))
{
USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
- if ((USBx->HNPTXSTS & (0xFFU << 16)) == 0U)
+ if ((USBx->GAHBCFG & USB_OTG_GAHBCFG_DMAEN) == 0U)
{
- USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
- USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
- do
+ if ((USBx->HNPTXSTS & (0xFFU << 16)) == 0U)
{
- if (++count > 1000U)
+ USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ USBx_HC(hcnum)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
+ do
{
- break;
- }
- } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
- }
- else
- {
- USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ if (++count > 1000U)
+ {
+ break;
+ }
+ } while ((USBx_HC(hcnum)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+ }
+ else
+ {
+ USBx_HC(hcnum)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
+ }
}
}
else
@@ -1942,8 +2009,6 @@
USBx_HOST->HAINT = 0xFFFFFFFFU;
USBx->GINTSTS = 0xFFFFFFFFU;
- (void)USB_EnableGlobalInt(USBx);
-
return HAL_OK;
}
