Release v1.4.2
diff --git a/Inc/Legacy/stm32_hal_legacy.h b/Inc/Legacy/stm32_hal_legacy.h
index cf0b41f..5057a2d 100644
--- a/Inc/Legacy/stm32_hal_legacy.h
+++ b/Inc/Legacy/stm32_hal_legacy.h
@@ -23,7 +23,7 @@
#define STM32_HAL_LEGACY
#ifdef __cplusplus
- extern "C" {
+extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
@@ -38,6 +38,14 @@
#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
+#if defined(STM32U5)
+#define CRYP_DATATYPE_32B CRYP_NO_SWAP
+#define CRYP_DATATYPE_16B CRYP_HALFWORD_SWAP
+#define CRYP_DATATYPE_8B CRYP_BYTE_SWAP
+#define CRYP_DATATYPE_1B CRYP_BIT_SWAP
+#define CRYP_CCF_CLEAR CRYP_CLEAR_CCF
+#define CRYP_ERR_CLEAR CRYP_CLEAR_RWEIF
+#endif /* STM32U5 */
/**
* @}
*/
@@ -210,6 +218,18 @@
* @}
*/
+/** @defgroup CRC_Aliases CRC API aliases
+ * @{
+ */
+#if defined(STM32WL) || defined(STM32WB) || defined(STM32L5) || defined(STM32L4)
+#else
+#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility */
+#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */
+#endif
+/**
+ * @}
+ */
+
/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
* @{
*/
@@ -235,7 +255,7 @@
#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
-#if defined(STM32G4) || defined(STM32H7)
+#if defined(STM32G4) || defined(STM32H7) || defined (STM32U5)
#define DAC_CHIPCONNECT_DISABLE DAC_CHIPCONNECT_EXTERNAL
#define DAC_CHIPCONNECT_ENABLE DAC_CHIPCONNECT_INTERNAL
#endif
@@ -382,7 +402,6 @@
#define DAC_TRIGGER_LP2_OUT DAC_TRIGGER_LPTIM2_OUT
#endif /* STM32H7 */
-
/**
* @}
*/
@@ -470,15 +489,24 @@
#define OB_BOOT_ENTRY_FORCED_FLASH OB_BOOT_LOCK_ENABLE
#endif
#if defined(STM32H7)
-#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1
-#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1
-#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1
-#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2
-#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2
-#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2
-#define FLASH_FLAG_WDW FLASH_FLAG_WBNE
-#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL
+#define FLASH_FLAG_SNECCE_BANK1RR FLASH_FLAG_SNECCERR_BANK1
+#define FLASH_FLAG_DBECCE_BANK1RR FLASH_FLAG_DBECCERR_BANK1
+#define FLASH_FLAG_STRBER_BANK1R FLASH_FLAG_STRBERR_BANK1
+#define FLASH_FLAG_SNECCE_BANK2RR FLASH_FLAG_SNECCERR_BANK2
+#define FLASH_FLAG_DBECCE_BANK2RR FLASH_FLAG_DBECCERR_BANK2
+#define FLASH_FLAG_STRBER_BANK2R FLASH_FLAG_STRBERR_BANK2
+#define FLASH_FLAG_WDW FLASH_FLAG_WBNE
+#define OB_WRP_SECTOR_All OB_WRP_SECTOR_ALL
#endif /* STM32H7 */
+#if defined(STM32U5)
+#define OB_USER_nRST_STOP OB_USER_NRST_STOP
+#define OB_USER_nRST_STDBY OB_USER_NRST_STDBY
+#define OB_USER_nRST_SHDW OB_USER_NRST_SHDW
+#define OB_USER_nSWBOOT0 OB_USER_NSWBOOT0
+#define OB_USER_nBOOT0 OB_USER_NBOOT0
+#define OB_nBOOT0_RESET OB_NBOOT0_RESET
+#define OB_nBOOT0_SET OB_NBOOT0_SET
+#endif /* STM32U5 */
/**
* @}
@@ -521,6 +549,7 @@
#define HAL_SYSCFG_EnableIOAnalogSwitchVDD HAL_SYSCFG_EnableIOSwitchVDD
#define HAL_SYSCFG_DisableIOAnalogSwitchVDD HAL_SYSCFG_DisableIOSwitchVDD
#endif /* STM32G4 */
+
/**
* @}
*/
@@ -595,24 +624,24 @@
#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
-#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7)
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) || defined(STM32G4) || defined(STM32H7) || defined(STM32WB)
#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH
#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
-#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7*/
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 || STM32G4 || STM32H7 || STM32WB*/
#if defined(STM32L1)
- #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
- #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
- #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
- #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
+#define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH
#endif /* STM32L1 */
#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1)
- #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
- #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
- #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
+#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW
+#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH
#endif /* STM32F0 || STM32F3 || STM32F1 */
#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1
@@ -773,49 +802,6 @@
#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1)
#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0)
-/** @brief Constants defining the events that can be selected to configure the
- * set/reset crossbar of a timer output
- */
-#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1)
-#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2)
-#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3)
-#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4)
-#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5)
-#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6)
-#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7)
-#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8)
-#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9)
-
-#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1)
-#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2)
-#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3)
-#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4)
-#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5)
-#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6)
-#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7)
-#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8)
-#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9)
-
-/** @brief Constants defining the event filtering applied to external events
- * by a timer
- */
-#define HRTIM_TIMEVENTFILTER_NONE (0x00000000U)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1)
-#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0)
-
/** @brief Constants defining the DLL calibration periods (in micro seconds)
*/
#define HRTIM_CALIBRATIONRATE_7300 0x00000000U
@@ -895,7 +881,11 @@
#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS
#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS
#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS
-
+
+#if defined(STM32U5)
+#define LPTIM_ISR_CC1 LPTIM_ISR_CC1IF
+#define LPTIM_ISR_CC2 LPTIM_ISR_CC2IF
+#endif /* STM32U5 */
/**
* @}
*/
@@ -968,6 +958,11 @@
#define HAL_OPAMP_MSP_DEINIT_CB_ID HAL_OPAMP_MSPDEINIT_CB_ID
#endif
+#if defined(STM32L4) || defined(STM32L5)
+#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALPOWER
+#elif defined(STM32G4)
+#define OPAMP_POWERMODE_NORMAL OPAMP_POWERMODE_NORMALSPEED
+#endif
/**
* @}
@@ -979,15 +974,15 @@
#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
#if defined(STM32H7)
- #define I2S_IT_TXE I2S_IT_TXP
- #define I2S_IT_RXNE I2S_IT_RXP
+#define I2S_IT_TXE I2S_IT_TXP
+#define I2S_IT_RXNE I2S_IT_RXP
- #define I2S_FLAG_TXE I2S_FLAG_TXP
- #define I2S_FLAG_RXNE I2S_FLAG_RXP
+#define I2S_FLAG_TXE I2S_FLAG_TXP
+#define I2S_FLAG_RXNE I2S_FLAG_RXP
#endif
#if defined(STM32F7)
- #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
+#define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL
#endif
/**
* @}
@@ -1022,7 +1017,7 @@
/**
* @}
*/
-
+
/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
* @{
*/
@@ -1122,16 +1117,16 @@
#if defined(STM32H7)
- #define SPI_FLAG_TXE SPI_FLAG_TXP
- #define SPI_FLAG_RXNE SPI_FLAG_RXP
+#define SPI_FLAG_TXE SPI_FLAG_TXP
+#define SPI_FLAG_RXNE SPI_FLAG_RXP
- #define SPI_IT_TXE SPI_IT_TXP
- #define SPI_IT_RXNE SPI_IT_RXP
+#define SPI_IT_TXE SPI_IT_TXP
+#define SPI_IT_RXNE SPI_IT_RXP
- #define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET
- #define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET
- #define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET
- #define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET
+#define SPI_FRLVL_EMPTY SPI_RX_FIFO_0PACKET
+#define SPI_FRLVL_QUARTER_FULL SPI_RX_FIFO_1PACKET
+#define SPI_FRLVL_HALF_FULL SPI_RX_FIFO_2PACKET
+#define SPI_FRLVL_FULL SPI_RX_FIFO_3PACKET
#endif /* STM32H7 */
@@ -1417,6 +1412,20 @@
*/
#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 */
+#if defined(STM32L4) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) \
+ || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) \
+ || defined(STM32H7) || defined(STM32U5)
+/** @defgroup DMA2D_Aliases DMA2D API Aliases
+ * @{
+ */
+#define HAL_DMA2D_DisableCLUT HAL_DMA2D_CLUTLoading_Abort /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort
+ for compatibility with legacy code */
+/**
+ * @}
+ */
+
+#endif /* STM32L4 || STM32F7 || STM32F4 || STM32H7 || STM32U5 */
+
/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
* @{
*/
@@ -1435,6 +1444,16 @@
* @}
*/
+#if !defined(STM32F2)
+/** @defgroup HASH_alias HASH API alias
+ * @{
+ */
+#define HAL_HASHEx_IRQHandler HAL_HASH_IRQHandler /*!< Redirection for compatibility with legacy code */
+/**
+ *
+ * @}
+ */
+#endif /* STM32F2 */
/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
* @{
*/
@@ -1494,7 +1513,8 @@
#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
-#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd\
+ )==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
#if defined(STM32L0)
@@ -1502,7 +1522,8 @@
#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
#endif
#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
-#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd\
+ )==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
#if defined(STM32H7A3xx) || defined(STM32H7B3xx) || defined(STM32H7B0xx) || defined(STM32H7A3xxQ) || defined(STM32H7B3xxQ) || defined(STM32H7B0xxQ)
#define HAL_EnableSRDomainDBGStopMode HAL_EnableDomain3DBGStopMode
#define HAL_DisableSRDomainDBGStopMode HAL_DisableDomain3DBGStopMode
@@ -1525,9 +1546,9 @@
#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
- /**
+/**
* @}
- */
+ */
/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
* @{
@@ -1537,7 +1558,8 @@
#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter
#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter
-#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd\
+ )==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
#if defined(STM32H7) || defined(STM32WB) || defined(STM32G0) || defined(STM32F0) || defined(STM32F1) || defined(STM32F2) || defined(STM32F3) || defined(STM32F4) || defined(STM32F7) || defined(STM32L0) || defined(STM32L4) || defined(STM32L5) || defined(STM32G4) || defined(STM32L1)
#define HAL_I2C_Master_Sequential_Transmit_IT HAL_I2C_Master_Seq_Transmit_IT
@@ -1562,9 +1584,9 @@
#define HAL_FMPI2C_Slave_Sequential_Transmit_DMA HAL_FMPI2C_Slave_Seq_Transmit_DMA
#define HAL_FMPI2C_Slave_Sequential_Receive_DMA HAL_FMPI2C_Slave_Seq_Receive_DMA
#endif /* STM32F4 */
- /**
+/**
* @}
- */
+ */
/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
* @{
@@ -1619,9 +1641,9 @@
#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
- /**
+/**
* @}
- */
+ */
/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
* @{
@@ -1870,15 +1892,15 @@
#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
#if defined(STM32H7)
- #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
- #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
- #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
- #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG1
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UnFreeze_WWDG1
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG1
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UnFreeze_IWDG1
#else
- #define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
- #define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
- #define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
- #define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
#endif /* STM32H7 */
#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
@@ -2089,8 +2111,8 @@
*/
#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
- ((WAVE) == DAC_WAVE_NOISE)|| \
- ((WAVE) == DAC_WAVE_TRIANGLE))
+ ((WAVE) == DAC_WAVE_NOISE)|| \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
/**
* @}
@@ -2146,7 +2168,7 @@
#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
#if defined(STM32H7)
- #define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG
+#define __HAL_I2S_CLEAR_FREFLAG __HAL_I2S_CLEAR_TIFREFLAG
#endif
/**
@@ -2283,7 +2305,8 @@
#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
-#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd\
+ )==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
@@ -3251,7 +3274,7 @@
#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK
#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2
-#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5)
+#if defined(STM32L4) || defined(STM32WB) || defined(STM32G0) || defined(STM32G4) || defined(STM32L5) || defined(STM32WL)
#define RCC_RTCCLKSOURCE_NO_CLK RCC_RTCCLKSOURCE_NONE
#else
#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
@@ -3363,7 +3386,20 @@
#define RCC_DFSDM1CLKSOURCE_APB2 RCC_DFSDM1CLKSOURCE_PCLK2
#define RCC_DFSDM2CLKSOURCE_APB2 RCC_DFSDM2CLKSOURCE_PCLK2
#define RCC_FMPI2C1CLKSOURCE_APB RCC_FMPI2C1CLKSOURCE_PCLK1
-
+#if defined(STM32U5)
+#define MSIKPLLModeSEL RCC_MSIKPLL_MODE_SEL
+#define MSISPLLModeSEL RCC_MSISPLL_MODE_SEL
+#define __HAL_RCC_AHB21_CLK_DISABLE __HAL_RCC_AHB2_1_CLK_DISABLE
+#define __HAL_RCC_AHB22_CLK_DISABLE __HAL_RCC_AHB2_2_CLK_DISABLE
+#define __HAL_RCC_AHB1_CLK_Disable_Clear __HAL_RCC_AHB1_CLK_ENABLE
+#define __HAL_RCC_AHB21_CLK_Disable_Clear __HAL_RCC_AHB2_1_CLK_ENABLE
+#define __HAL_RCC_AHB22_CLK_Disable_Clear __HAL_RCC_AHB2_2_CLK_ENABLE
+#define __HAL_RCC_AHB3_CLK_Disable_Clear __HAL_RCC_AHB3_CLK_ENABLE
+#define __HAL_RCC_APB1_CLK_Disable_Clear __HAL_RCC_APB1_CLK_ENABLE
+#define __HAL_RCC_APB2_CLK_Disable_Clear __HAL_RCC_APB2_CLK_ENABLE
+#define __HAL_RCC_APB3_CLK_Disable_Clear __HAL_RCC_APB3_CLK_ENABLE
+#define IS_RCC_MSIPLLModeSelection IS_RCC_MSIPLLMODE_SELECT
+#endif
/**
* @}
*/
@@ -3380,7 +3416,7 @@
/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
* @{
*/
-#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4)
+#if defined (STM32G0) || defined (STM32L5) || defined (STM32L412xx) || defined (STM32L422xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || defined (STM32G4) || defined (STM32WL) || defined (STM32U5)
#else
#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
#endif
@@ -3400,19 +3436,19 @@
#else
#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
(((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
#endif /* STM32F1 */
#define IS_ALARM IS_RTC_ALARM
@@ -3437,13 +3473,17 @@
* @}
*/
-/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+/** @defgroup HAL_SD_Aliased_Macros HAL SD/MMC Aliased Macros maintained for legacy purpose
* @{
*/
#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE
#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS
+#define eMMC_HIGH_VOLTAGE_RANGE EMMC_HIGH_VOLTAGE_RANGE
+#define eMMC_DUAL_VOLTAGE_RANGE EMMC_DUAL_VOLTAGE_RANGE
+#define eMMC_LOW_VOLTAGE_RANGE EMMC_LOW_VOLTAGE_RANGE
+
#if defined(STM32F4) || defined(STM32F2)
#define SD_SDMMC_DISABLED SD_SDIO_DISABLED
#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY
@@ -3596,6 +3636,13 @@
#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+#if defined(STM32F0) || defined(STM32F3) || defined(STM32F7)
+#define USART_OVERSAMPLING_16 0x00000000U
+#define USART_OVERSAMPLING_8 USART_CR1_OVER8
+
+#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \
+ ((__SAMPLING__) == USART_OVERSAMPLING_8))
+#endif /* STM32F0 || STM32F3 || STM32F7 */
/**
* @}
*/
diff --git a/Inc/stm32g0xx_hal_adc.h b/Inc/stm32g0xx_hal_adc.h
index 1e06740..d58433f 100644
--- a/Inc/stm32g0xx_hal_adc.h
+++ b/Inc/stm32g0xx_hal_adc.h
@@ -132,8 +132,7 @@
FunctionalState LowPowerAutoPowerOff; /*!< Select the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling).
This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait').
- This parameter can be set to ENABLE or DISABLE.
- Note: If enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) */
+ This parameter can be set to ENABLE or DISABLE. */
FunctionalState ContinuousConvMode; /*!< Specify whether the conversion is performed in single mode (one conversion) or continuous mode for ADC group regular,
after the first ADC conversion start trigger occurred (software start or external trigger).
@@ -473,7 +472,7 @@
/** @defgroup ADC_HAL_EC_DATA_ALIGN ADC conversion data alignment
* @{
*/
-#define ADC_DATAALIGN_RIGHT (LL_ADC_DATA_ALIGN_RIGHT)/*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/
+#define ADC_DATAALIGN_RIGHT (LL_ADC_DATA_ALIGN_RIGHT) /*!< ADC conversion data alignment: right aligned (alignment on data register LSB bit 0)*/
#define ADC_DATAALIGN_LEFT (LL_ADC_DATA_ALIGN_LEFT) /*!< ADC conversion data alignment: left aligned (alignment on data register MSB bit 15)*/
/**
* @}
@@ -516,17 +515,17 @@
#define ADC_EXTERNALTRIG_T1_CC4 (LL_ADC_REG_TRIG_EXT_TIM1_CH4) /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
#if defined(TIM2)
#define ADC_EXTERNALTRIG_T2_TRGO (LL_ADC_REG_TRIG_EXT_TIM2_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM2 */
#define ADC_EXTERNALTRIG_T3_TRGO (LL_ADC_REG_TRIG_EXT_TIM3_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */
#if defined(TIM4)
#define ADC_EXTERNALTRIG_T4_TRGO (LL_ADC_REG_TRIG_EXT_TIM4_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM4 */
#if defined(TIM6)
#define ADC_EXTERNALTRIG_T6_TRGO (LL_ADC_REG_TRIG_EXT_TIM6_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM6 */
#if defined(TIM15)
#define ADC_EXTERNALTRIG_T15_TRGO (LL_ADC_REG_TRIG_EXT_TIM15_TRGO) /*!< ADC group regular conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM15 */
#define ADC_EXTERNALTRIG_EXT_IT11 (LL_ADC_REG_TRIG_EXT_EXTI_LINE11) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */
/**
* @}
@@ -941,7 +940,7 @@
((REGTRIG) == ADC_EXTERNALTRIG_T3_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIG_EXT_IT11) || \
((REGTRIG) == ADC_SOFTWARE_START) )
-#endif
+#endif /* TIM15 && TIM6 && TIM2 */
#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == ADC_EOC_SINGLE_CONV) || \
((EOC_SELECTION) == ADC_EOC_SEQ_CONV))
@@ -1707,8 +1706,8 @@
* @{
*/
/* Peripheral Control functions ***********************************************/
-HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig);
-HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig);
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *pConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *pAnalogWDGConfig);
/**
* @}
diff --git a/Inc/stm32g0xx_hal_comp.h b/Inc/stm32g0xx_hal_comp.h
index e6e8d8b..f8e995c 100644
--- a/Inc/stm32g0xx_hal_comp.h
+++ b/Inc/stm32g0xx_hal_comp.h
@@ -103,7 +103,7 @@
typedef struct __COMP_HandleTypeDef
#else
typedef struct
-#endif
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
{
COMP_TypeDef *Instance; /*!< Register base address */
COMP_InitTypeDef Init; /*!< COMP required parameters */
@@ -173,7 +173,7 @@
#define COMP_WINDOWOUTPUT_COMP2 (COMP_CSR_WINOUT | COMP_WINDOWMODE_COMP2) /*!< Window output synthetized on COMP2 output: COMP2 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). */
#if defined(COMP3)
#define COMP_WINDOWOUTPUT_COMP3 (COMP_CSR_WINOUT) /*!< Window output synthetized on COMP3 output: COMP3 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). */
-#endif
+#endif /* COMP3 */
#define COMP_WINDOWOUTPUT_BOTH (0x00000001UL) /*!< Window output synthetized on both comparators output of pair of comparator selected (COMP1 and COMP2, or COMP2 and COMP3 for devices featuring COMP3 instance): both comparators outputs are no more indicating their own state, but global window mode state (logical high means monitored signal is within comparators window). This is a specific configuration (technically possible but not relevant from application point of view: 2 comparators output used for the same signal level), standard configuration for window mode is one of the settings above. */
/**
* @}
@@ -307,7 +307,7 @@
} while(0)
#else
#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
-#endif
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
/**
* @brief Clear COMP error code (set it to no error code "HAL_COMP_ERROR_NONE").
@@ -674,7 +674,7 @@
#define COMP_EXTI_LINE_COMP2 (EXTI_IMR1_IM18) /*!< EXTI line 18 connected to COMP2 output */
#if defined(COMP3)
#define COMP_EXTI_LINE_COMP3 (EXTI_IMR1_IM20) /*!< EXTI line 20 connected to COMP3 output */
-#endif
+#endif /* COMP3 */
/**
* @}
*/
@@ -714,7 +714,7 @@
#else
#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 \
: COMP_EXTI_LINE_COMP2)
-#endif
+#endif /* COMP3 */
/**
* @}
*/
@@ -738,7 +738,7 @@
(((__WINDOWMODE__) == COMP_WINDOWMODE_DISABLE) || \
((__WINDOWMODE__) == COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON)|| \
((__WINDOWMODE__) == COMP_WINDOWMODE_COMP2_INPUT_PLUS_COMMON) )
-#endif
+#endif /* COMP3 */
#define IS_COMP_WINDOWOUTPUT(__WINDOWOUTPUT__) (((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_EACH_COMP) || \
((__WINDOWOUTPUT__) == COMP_WINDOWOUTPUT_COMP1) || \
diff --git a/Inc/stm32g0xx_hal_conf_template.h b/Inc/stm32g0xx_hal_conf_template.h
index c026adc..4f37c38 100644
--- a/Inc/stm32g0xx_hal_conf_template.h
+++ b/Inc/stm32g0xx_hal_conf_template.h
@@ -127,7 +127,7 @@
#define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
The real value my vary depending on manufacturing process variations.*/
#endif /* HSI48_VALUE */
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/**
* @brief Internal Low Speed oscillator (LSI) value.
@@ -167,7 +167,7 @@
#if !defined (EXTERNAL_I2S2_CLOCK_VALUE)
#define EXTERNAL_I2S2_CLOCK_VALUE 48000U /*!< Value of the I2S2 External clock source in Hz*/
#endif /* EXTERNAL_I2S2_CLOCK_VALUE */
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/* Tip: To avoid modifying this file each time you need to use different HSE,
=== you can define the HSE value in your toolchain compiler preprocessor. */
diff --git a/Inc/stm32g0xx_hal_crc.h b/Inc/stm32g0xx_hal_crc.h
index ebdf8dd..164ca10 100644
--- a/Inc/stm32g0xx_hal_crc.h
+++ b/Inc/stm32g0xx_hal_crc.h
@@ -60,19 +60,22 @@
{
uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.
If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default
- X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1.
+ X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 +
+ X^4 + X^2+ X +1.
In that case, there is no need to set GeneratingPolynomial field.
- If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set. */
+ If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and
+ CRCLength fields must be set. */
uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used.
If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
- 0xFFFFFFFF value. In that case, there is no need to set InitValue field.
- If otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */
+ 0xFFFFFFFF value. In that case, there is no need to set InitValue field. If
+ otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */
uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree
- respectively equal to 7, 8, 16 or 32. This field is written in normal representation,
- e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
- No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE. */
+ respectively equal to 7, 8, 16 or 32. This field is written in normal,
+ representation e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1
+ is written 0x65. No need to specify it if DefaultPolynomialUse is set to
+ DEFAULT_POLYNOMIAL_ENABLE. */
uint32_t CRCLength; /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length.
Value can be either one of
@@ -87,14 +90,18 @@
uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode.
Can be either one of the following values
@arg @ref CRC_INPUTDATA_INVERSION_NONE no input data inversion
- @arg @ref CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
- @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
- @arg @ref CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */
+ @arg @ref CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D
+ becomes 0x58D43CB2
+ @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion,
+ 0x1A2B3C4D becomes 0xD458B23C
+ @arg @ref CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D
+ becomes 0xB23CD458 */
uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
Can be either
@arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion,
- @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE CRC 0x11223344 is converted into 0x22CC4488 */
+ @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE CRC 0x11223344 is converted
+ into 0x22CC4488 */
} CRC_InitTypeDef;
/**
@@ -112,12 +119,16 @@
uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format.
Can be either
- @arg @ref CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes (8-bit data)
- @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of half-words (16-bit data)
- @arg @ref CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words (32-bit data)
+ @arg @ref CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes
+ (8-bit data)
+ @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of
+ half-words (16-bit data)
+ @arg @ref CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words
+ (32-bit data)
- Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
- must occur if InputBufferFormat is not one of the three values listed above */
+ Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization
+ error must occur if InputBufferFormat is not one of the three values listed
+ above */
} CRC_HandleTypeDef;
/**
* @}
@@ -199,15 +210,6 @@
* @}
*/
-/** @defgroup CRC_Aliases CRC API aliases
- * @{
- */
-#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility */
-#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */
-/**
- * @}
- */
-
/**
* @}
*/
@@ -267,7 +269,6 @@
#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \
((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE))
-
#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \
((VALUE) == DEFAULT_INIT_VALUE_DISABLE))
diff --git a/Inc/stm32g0xx_hal_cryp.h b/Inc/stm32g0xx_hal_cryp.h
index 29ec809..d55e1e0 100644
--- a/Inc/stm32g0xx_hal_cryp.h
+++ b/Inc/stm32g0xx_hal_cryp.h
@@ -107,7 +107,7 @@
typedef struct __CRYP_HandleTypeDef
#else
typedef struct
-#endif
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
{
AES_TypeDef *Instance; /*!< AES Register base address */
diff --git a/Inc/stm32g0xx_hal_dac.h b/Inc/stm32g0xx_hal_dac.h
index 98961f4..e377ab0 100644
--- a/Inc/stm32g0xx_hal_dac.h
+++ b/Inc/stm32g0xx_hal_dac.h
@@ -64,7 +64,7 @@
typedef struct __DAC_HandleTypeDef
#else
typedef struct
-#endif
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
{
DAC_TypeDef *Instance; /*!< Register base address */
diff --git a/Inc/stm32g0xx_hal_def.h b/Inc/stm32g0xx_hal_def.h
index 8d1ecf0..dd1f37c 100644
--- a/Inc/stm32g0xx_hal_def.h
+++ b/Inc/stm32g0xx_hal_def.h
@@ -110,10 +110,10 @@
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
#ifndef __weak
#define __weak __attribute__((weak))
- #endif
+ #endif /* __weak */
#ifndef __packed
#define __packed __attribute__((packed))
- #endif
+ #endif /* __packed */
#elif defined ( __GNUC__ ) && !defined (__CC_ARM) /* GNU Compiler */
#ifndef __weak
#define __weak __attribute__((weak))
@@ -129,10 +129,10 @@
#if defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) /* ARM Compiler V6 */
#ifndef __ALIGN_BEGIN
#define __ALIGN_BEGIN
- #endif
+ #endif /* __ALIGN_BEGIN */
#ifndef __ALIGN_END
#define __ALIGN_END __attribute__ ((aligned (4)))
- #endif
+ #endif /* __ALIGN_END */
#elif defined (__GNUC__) && !defined (__CC_ARM) /* GNU Compiler */
#ifndef __ALIGN_END
#define __ALIGN_END __attribute__ ((aligned (4U)))
@@ -185,7 +185,7 @@
*/
#define __RAM_FUNC __attribute__((section(".RamFunc")))
-#endif
+#endif /* __CC_ARM || __ARMCC_VERSION */
/**
* @brief __NOINLINE definition
@@ -202,7 +202,7 @@
*/
#define __NOINLINE _Pragma("optimize = no_inline")
-#endif
+#endif /* __CC_ARM || __ARMCC_VERSION */
#ifdef __cplusplus
diff --git a/Inc/stm32g0xx_hal_dma.h b/Inc/stm32g0xx_hal_dma.h
index d1acb78..7fc6609 100644
--- a/Inc/stm32g0xx_hal_dma.h
+++ b/Inc/stm32g0xx_hal_dma.h
@@ -136,7 +136,7 @@
#if defined(DMA2)
DMA_TypeDef *DmaBaseAddress; /*!< DMA Channel Base Address */
-#endif
+#endif /* DMA2 */
uint32_t ChannelIndex; /*!< DMA Channel Index */
DMAMUX_Channel_TypeDef *DMAmuxChannel; /*!< Register base address */
@@ -190,11 +190,11 @@
#if defined(AES)
#define DMA_REQUEST_AES_IN LL_DMAMUX_REQ_AES_IN /*!< DMAMUX AES_IN request */
#define DMA_REQUEST_AES_OUT LL_DMAMUX_REQ_AES_OUT /*!< DMAMUX AES_OUT request */
-#endif
+#endif /* AES */
#if defined(DAC1)
#define DMA_REQUEST_DAC1_CH1 LL_DMAMUX_REQ_DAC1_CH1 /*!< DMAMUX DAC_CH1 request */
#define DMA_REQUEST_DAC1_CH2 LL_DMAMUX_REQ_DAC1_CH2 /*!< DMAMUX DAC_CH2 request */
-#endif
+#endif /* DAC1 */
#define DMA_REQUEST_I2C1_RX LL_DMAMUX_REQ_I2C1_RX /*!< DMAMUX I2C1 RX request */
#define DMA_REQUEST_I2C1_TX LL_DMAMUX_REQ_I2C1_TX /*!< DMAMUX I2C1 TX request */
#define DMA_REQUEST_I2C2_RX LL_DMAMUX_REQ_I2C2_RX /*!< DMAMUX I2C2 RX request */
@@ -202,7 +202,7 @@
#if defined(LPUART1)
#define DMA_REQUEST_LPUART1_RX LL_DMAMUX_REQ_LPUART1_RX /*!< DMAMUX LPUART1 RX request */
#define DMA_REQUEST_LPUART1_TX LL_DMAMUX_REQ_LPUART1_TX /*!< DMAMUX LPUART1 TX request */
-#endif
+#endif /* LPUART1 */
#define DMA_REQUEST_SPI1_RX LL_DMAMUX_REQ_SPI1_RX /*!< DMAMUX SPI1 RX request */
#define DMA_REQUEST_SPI1_TX LL_DMAMUX_REQ_SPI1_TX /*!< DMAMUX SPI1 TX request */
#define DMA_REQUEST_SPI2_RX LL_DMAMUX_REQ_SPI2_RX /*!< DMAMUX SPI2 RX request */
@@ -220,7 +220,7 @@
#define DMA_REQUEST_TIM2_CH4 LL_DMAMUX_REQ_TIM2_CH4 /*!< DMAMUX TIM2 CH4 request */
#define DMA_REQUEST_TIM2_TRIG LL_DMAMUX_REQ_TIM2_TRIG /*!< DMAMUX TIM2 TRIG request */
#define DMA_REQUEST_TIM2_UP LL_DMAMUX_REQ_TIM2_UP /*!< DMAMUX TIM2 UP request */
-#endif
+#endif /* TIM2 */
#define DMA_REQUEST_TIM3_CH1 LL_DMAMUX_REQ_TIM3_CH1 /*!< DMAMUX TIM3 CH1 request */
#define DMA_REQUEST_TIM3_CH2 LL_DMAMUX_REQ_TIM3_CH2 /*!< DMAMUX TIM3 CH2 request */
#define DMA_REQUEST_TIM3_CH3 LL_DMAMUX_REQ_TIM3_CH3 /*!< DMAMUX TIM3 CH3 request */
@@ -229,16 +229,16 @@
#define DMA_REQUEST_TIM3_UP LL_DMAMUX_REQ_TIM3_UP /*!< DMAMUX TIM3 UP request */
#if defined(TIM6)
#define DMA_REQUEST_TIM6_UP LL_DMAMUX_REQ_TIM6_UP /*!< DMAMUX TIM6 UP request */
-#endif
+#endif /* TIM6 */
#if defined(TIM7)
#define DMA_REQUEST_TIM7_UP LL_DMAMUX_REQ_TIM7_UP /*!< DMAMUX TIM7 UP request */
-#endif
+#endif /* TIM7 */
#if defined(TIM15)
#define DMA_REQUEST_TIM15_CH1 LL_DMAMUX_REQ_TIM15_CH1 /*!< DMAMUX TIM15 CH1 request */
#define DMA_REQUEST_TIM15_CH2 LL_DMAMUX_REQ_TIM15_CH2 /*!< DMAMUX TIM15 CH2 request */
#define DMA_REQUEST_TIM15_TRIG_COM LL_DMAMUX_REQ_TIM15_TRIG_COM /*!< DMAMUX TIM15 TRIG COM request */
#define DMA_REQUEST_TIM15_UP LL_DMAMUX_REQ_TIM15_UP /*!< DMAMUX TIM15 UP request */
-#endif
+#endif /* TIM15 */
#define DMA_REQUEST_TIM16_CH1 LL_DMAMUX_REQ_TIM16_CH1 /*!< DMAMUX TIM16 CH1 request */
#define DMA_REQUEST_TIM16_COM LL_DMAMUX_REQ_TIM16_COM /*!< DMAMUX TIM16 COM request */
#define DMA_REQUEST_TIM16_UP LL_DMAMUX_REQ_TIM16_UP /*!< DMAMUX TIM16 UP request */
@@ -252,34 +252,34 @@
#if defined(USART3)
#define DMA_REQUEST_USART3_RX LL_DMAMUX_REQ_USART3_RX /*!< DMAMUX USART3 RX request */
#define DMA_REQUEST_USART3_TX LL_DMAMUX_REQ_USART3_TX /*!< DMAMUX USART3 TX request */
-#endif
+#endif /* USART3 */
#if defined(USART4)
#define DMA_REQUEST_USART4_RX LL_DMAMUX_REQ_USART4_RX /*!< DMAMUX USART4 RX request */
#define DMA_REQUEST_USART4_TX LL_DMAMUX_REQ_USART4_TX /*!< DMAMUX USART4 TX request */
-#endif
+#endif /* USART4 */
#if defined(UCPD1)
#define DMA_REQUEST_UCPD1_RX LL_DMAMUX_REQ_UCPD1_RX /*!< DMAMUX UCPD1 RX request */
#define DMA_REQUEST_UCPD1_TX LL_DMAMUX_REQ_UCPD1_TX /*!< DMAMUX UCPD1 TX request */
-#endif
+#endif/* UCPD1 */
#if defined(UCPD2)
#define DMA_REQUEST_UCPD2_RX LL_DMAMUX_REQ_UCPD2_RX /*!< DMAMUX UCPD2 RX request */
#define DMA_REQUEST_UCPD2_TX LL_DMAMUX_REQ_UCPD2_TX /*!< DMAMUX UCPD2 TX request */
-#endif
+#endif /* UCPD2 */
#if defined(I2C3)
#define DMA_REQUEST_I2C3_RX LL_DMAMUX_REQ_I2C3_RX /*!< DMAMUX I2C3 RX request */
#define DMA_REQUEST_I2C3_TX LL_DMAMUX_REQ_I2C3_TX /*!< DMAMUX I2C3 TX request */
-#endif
+#endif /* I2C3 */
#if defined(LPUART2)
#define DMA_REQUEST_LPUART2_RX LL_DMAMUX_REQ_LPUART2_RX /*!< DMAMUX LPUART2 RX request */
#define DMA_REQUEST_LPUART2_TX LL_DMAMUX_REQ_LPUART2_TX /*!< DMAMUX LPUART2 TX request */
-#endif
+#endif /* LPUART2 */
#if defined(SPI3)
#define DMA_REQUEST_SPI3_RX LL_DMAMUX_REQ_SPI3_RX /*!< DMAMUX SPI3 RX request */
#define DMA_REQUEST_SPI3_TX LL_DMAMUX_REQ_SPI3_TX /*!< DMAMUX SPI3 TX request */
-#endif
+#endif /* SPI3 */
#if defined(TIM4)
#define DMA_REQUEST_TIM4_CH1 LL_DMAMUX_REQ_TIM4_CH1 /*!< DMAMUX TIM4 CH1 request */
@@ -288,17 +288,17 @@
#define DMA_REQUEST_TIM4_CH4 LL_DMAMUX_REQ_TIM4_CH4 /*!< DMAMUX TIM4 CH4 request */
#define DMA_REQUEST_TIM4_TRIG LL_DMAMUX_REQ_TIM4_TRIG /*!< DMAMUX TIM4 TRIG request */
#define DMA_REQUEST_TIM4_UP LL_DMAMUX_REQ_TIM4_UP /*!< DMAMUX TIM4 UP request */
-#endif
+#endif /* TIM4 */
#if defined(USART5)
#define DMA_REQUEST_USART5_RX LL_DMAMUX_REQ_USART5_RX /*!< DMAMUX USART5 RX request */
#define DMA_REQUEST_USART5_TX LL_DMAMUX_REQ_USART5_TX /*!< DMAMUX USART5 TX request */
-#endif
+#endif /* USART5 */
#if defined(USART6)
#define DMA_REQUEST_USART6_RX LL_DMAMUX_REQ_USART6_RX /*!< DMAMUX USART6 RX request */
#define DMA_REQUEST_USART6_TX LL_DMAMUX_REQ_USART6_TX /*!< DMAMUX USART6 TX request */
-#endif
+#endif /* USART6 */
#define DMA_MAX_REQUEST LL_DMAMUX_MAX_REQ
@@ -391,36 +391,36 @@
#define DMA_FLAG_GI1 DMA_ISR_GIF1 /*!< Global Interrupt flag for Channel 1 */
#define DMA_FLAG_TC1 DMA_ISR_TCIF1 /*!< Transfer Complete flag for Channel 1 */
-#define DMA_FLAG_HT1 DMA_ISR_HTIF1 /*!< Half Transfer flag for Channel 1 */
-#define DMA_FLAG_TE1 DMA_ISR_TEIF1 /*!< Transfer Error flag for Channel 1 */
+#define DMA_FLAG_HT1 DMA_ISR_HTIF1 /*!< Half Transfer flag for Channel 1 */
+#define DMA_FLAG_TE1 DMA_ISR_TEIF1 /*!< Transfer Error flag for Channel 1 */
#define DMA_FLAG_GI2 DMA_ISR_GIF2 /*!< Global Interrupt flag for Channel 2 */
#define DMA_FLAG_TC2 DMA_ISR_TCIF2 /*!< Transfer Complete flag for Channel 2 */
-#define DMA_FLAG_HT2 DMA_ISR_HTIF2 /*!< Half Transfer flag for Channel 2 */
-#define DMA_FLAG_TE2 DMA_ISR_TEIF2 /*!< Transfer Error flag for Channel 2 */
+#define DMA_FLAG_HT2 DMA_ISR_HTIF2 /*!< Half Transfer flag for Channel 2 */
+#define DMA_FLAG_TE2 DMA_ISR_TEIF2 /*!< Transfer Error flag for Channel 2 */
#define DMA_FLAG_GI3 DMA_ISR_GIF3 /*!< Global Interrupt flag for Channel 3 */
#define DMA_FLAG_TC3 DMA_ISR_TCIF3 /*!< Transfer Complete flag for Channel 3 */
-#define DMA_FLAG_HT3 DMA_ISR_HTIF3 /*!< Half Transfer flag for Channel 3 */
-#define DMA_FLAG_TE3 DMA_ISR_TEIF3 /*!< Transfer Error flag for Channel 3 */
+#define DMA_FLAG_HT3 DMA_ISR_HTIF3 /*!< Half Transfer flag for Channel 3 */
+#define DMA_FLAG_TE3 DMA_ISR_TEIF3 /*!< Transfer Error flag for Channel 3 */
#define DMA_FLAG_GI4 DMA_ISR_GIF4 /*!< Global Interrupt flag for Channel 4 */
#define DMA_FLAG_TC4 DMA_ISR_TCIF4 /*!< Transfer Complete flag for Channel 4 */
-#define DMA_FLAG_HT4 DMA_ISR_HTIF4 /*!< Half Transfer flag for Channel 4 */
-#define DMA_FLAG_TE4 DMA_ISR_TEIF4 /*!< Transfer Error flag for Channel 4 */
+#define DMA_FLAG_HT4 DMA_ISR_HTIF4 /*!< Half Transfer flag for Channel 4 */
+#define DMA_FLAG_TE4 DMA_ISR_TEIF4 /*!< Transfer Error flag for Channel 4 */
#define DMA_FLAG_GI5 DMA_ISR_GIF5 /*!< Global Interrupt flag for Channel 5 */
#define DMA_FLAG_TC5 DMA_ISR_TCIF5 /*!< Transfer Complete flag for Channel 5 */
-#define DMA_FLAG_HT5 DMA_ISR_HTIF5 /*!< Half Transfer flag for Channel 5 */
-#define DMA_FLAG_TE5 DMA_ISR_TEIF5 /*!< Transfer Error for Channel 5 */
+#define DMA_FLAG_HT5 DMA_ISR_HTIF5 /*!< Half Transfer flag for Channel 5 */
+#define DMA_FLAG_TE5 DMA_ISR_TEIF5 /*!< Transfer Error for Channel 5 */
#if defined(DMA1_Channel6)
#define DMA_FLAG_GI6 DMA_ISR_GIF6 /*!< Global Interrupt flag for Channel 6 */
#define DMA_FLAG_TC6 DMA_ISR_TCIF6 /*!< Transfer Complete flag for Channel 6 */
-#define DMA_FLAG_HT6 DMA_ISR_HTIF6 /*!< Half Transfer flag for Channel 6 */
-#define DMA_FLAG_TE6 DMA_ISR_TEIF6 /*!< Transfer Error flag for Channel 6 */
-#endif
+#define DMA_FLAG_HT6 DMA_ISR_HTIF6 /*!< Half Transfer flag for Channel 6 */
+#define DMA_FLAG_TE6 DMA_ISR_TEIF6 /*!< Transfer Error flag for Channel 6 */
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
#define DMA_FLAG_GI7 DMA_ISR_GIF7 /*!< Global Interrupt flag for Channel 7 */
#define DMA_FLAG_TC7 DMA_ISR_TCIF7 /*!< Transfer Complete flag for Channel 7 */
-#define DMA_FLAG_HT7 DMA_ISR_HTIF7 /*!< Half Transfer flag for Channel 7 */
-#define DMA_FLAG_TE7 DMA_ISR_TEIF7 /*!< Transfer Error flag for Channel 7 */
-#endif
+#define DMA_FLAG_HT7 DMA_ISR_HTIF7 /*!< Half Transfer flag for Channel 7 */
+#define DMA_FLAG_TE7 DMA_ISR_TEIF7 /*!< Transfer Error flag for Channel 7 */
+#endif /* DMA1_Channel7 */
/**
* @}
*/
@@ -490,7 +490,7 @@
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
DMA_FLAG_TC5)
-#endif
+#endif /* DMA1_Channel8 */
#endif /* DMA2 */
/**
@@ -529,7 +529,7 @@
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
DMA_FLAG_HT5)
-#endif
+#endif /* DMA1_Channel8 */
#endif /* DMA2 */
/**
@@ -568,7 +568,7 @@
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
DMA_FLAG_TE5)
-#endif
+#endif /* DMA1_Channel8 */
#endif /* DMA2 */
/**
@@ -607,7 +607,7 @@
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_GI3 :\
((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_GI4 :\
DMA_FLAG_GI5)
-#endif
+#endif /* DMA1_Channel8 */
#endif /* DMA2 */
/**
diff --git a/Inc/stm32g0xx_hal_dma_ex.h b/Inc/stm32g0xx_hal_dma_ex.h
index ac387b8..c737f3d 100644
--- a/Inc/stm32g0xx_hal_dma_ex.h
+++ b/Inc/stm32g0xx_hal_dma_ex.h
@@ -116,10 +116,10 @@
#define HAL_DMAMUX1_SYNC_DMAMUX1_CH3_EVT LL_DMAMUX_SYNC_DMAMUX_CH3 /*!< Synchronization signal from DMAMUX channel3 Event */
#if defined(LPTIM1)
#define HAL_DMAMUX1_SYNC_LPTIM1_OUT LL_DMAMUX_SYNC_LPTIM1_OUT /*!< Synchronization signal from LPTIM1 Output */
-#endif
+#endif /* LPTIM1 */
#if defined(LPTIM2)
#define HAL_DMAMUX1_SYNC_LPTIM2_OUT LL_DMAMUX_SYNC_LPTIM2_OUT /*!< Synchronization signal from LPTIM2 Output */
-#endif
+#endif /* LPTIM2 */
#define HAL_DMAMUX1_SYNC_TIM14_OC LL_DMAMUX_SYNC_TIM14_OC /*!< Synchronization signal from TIM14 OC */
#define HAL_DMAMUX1_MAX_SYNC HAL_DMAMUX1_SYNC_TIM14_OC
@@ -164,10 +164,10 @@
#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH3_EVT LL_DMAMUX_REQ_GEN_DMAMUX_CH3 /*!< Request signal generation from DMAMUX channel3 Event */
#if defined(LPTIM1)
#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT LL_DMAMUX_REQ_GEN_LPTIM1_OUT /*!< Request signal generation from LPTIM1 Output */
-#endif
+#endif /* LPTIM1 */
#if defined(LPTIM2)
#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT LL_DMAMUX_REQ_GEN_LPTIM2_OUT /*!< Request signal generation from LPTIM2 Output */
-#endif
+#endif /* LPTIM2 */
#define HAL_DMAMUX1_REQ_GEN_TIM14_OC LL_DMAMUX_REQ_GEN_TIM14_OC /*!< Request signal generation from TIM14 OC */
#define HAL_DMAMUX1_MAX_REQ_GEN HAL_DMAMUX1_REQ_GEN_TIM14_OC
diff --git a/Inc/stm32g0xx_hal_exti.h b/Inc/stm32g0xx_hal_exti.h
index 6caa18d..96c6904 100644
--- a/Inc/stm32g0xx_hal_exti.h
+++ b/Inc/stm32g0xx_hal_exti.h
@@ -109,80 +109,80 @@
#define EXTI_LINE_17 (EXTI_CONFIG | EXTI_REG1 | 0x11u)
#else
#define EXTI_LINE_17 (EXTI_RESERVED | EXTI_REG1 | 0x11u)
-#endif
+#endif /* COMP1 */
#if defined(COMP2)
#define EXTI_LINE_18 (EXTI_CONFIG | EXTI_REG1 | 0x12u)
#else
#define EXTI_LINE_18 (EXTI_RESERVED | EXTI_REG1 | 0x12u)
-#endif
+#endif /* COMP2 */
#define EXTI_LINE_19 (EXTI_DIRECT | EXTI_REG1 | 0x13u)
#if defined(COMP3)
#define EXTI_LINE_20 (EXTI_CONFIG | EXTI_REG1 | 0x14u)
#else
#define EXTI_LINE_20 (EXTI_RESERVED | EXTI_REG1 | 0x14u)
-#endif
+#endif /* COMP3 */
#define EXTI_LINE_21 (EXTI_DIRECT | EXTI_REG1 | 0x15u)
#if defined(RCC_CCIPR_I2C2SEL)
#define EXTI_LINE_22 (EXTI_DIRECT | EXTI_REG1 | 0x16u)
#else
#define EXTI_LINE_22 (EXTI_RESERVED | EXTI_REG1 | 0x16u)
-#endif
+#endif /* RCC_CCIPR_I2C2SEL */
#define EXTI_LINE_23 (EXTI_DIRECT | EXTI_REG1 | 0x17u)
#if defined(RCC_CCIPR_USART3SEL)
#define EXTI_LINE_24 (EXTI_DIRECT | EXTI_REG1 | 0x18u)
#else
#define EXTI_LINE_24 (EXTI_RESERVED | EXTI_REG1 | 0x18u)
-#endif
+#endif /* RCC_CCIPR_USART3SEL */
#define EXTI_LINE_25 (EXTI_DIRECT | EXTI_REG1 | 0x19u)
#if defined(RCC_CCIPR_USART2SEL)
#define EXTI_LINE_26 (EXTI_DIRECT | EXTI_REG1 | 0x1Au)
#else
#define EXTI_LINE_26 (EXTI_RESERVED | EXTI_REG1 | 0x1Au)
-#endif
+#endif /* RCC_CCIPR_USART2SEL */
#if defined(CEC)
#define EXTI_LINE_27 (EXTI_DIRECT | EXTI_REG1 | 0x1Bu)
#else
#define EXTI_LINE_27 (EXTI_RESERVED | EXTI_REG1 | 0x1Bu)
-#endif
+#endif /* CEC */
#if defined(LPUART1)
#define EXTI_LINE_28 (EXTI_DIRECT | EXTI_REG1 | 0x1Cu)
#else
#define EXTI_LINE_28 (EXTI_RESERVED | EXTI_REG1 | 0x1Cu)
-#endif
+#endif /* LPUART1 */
#if defined(LPTIM1)
#define EXTI_LINE_29 (EXTI_DIRECT | EXTI_REG1 | 0x1Du)
#else
#define EXTI_LINE_29 (EXTI_RESERVED | EXTI_REG1 | 0x1Du)
-#endif
+#endif /* LPTIM1 */
#if defined(LPTIM2)
#define EXTI_LINE_30 (EXTI_DIRECT | EXTI_REG1 | 0x1Eu)
#else
#define EXTI_LINE_30 (EXTI_RESERVED | EXTI_REG1 | 0x1Eu)
-#endif
+#endif /* LPTIM2 */
#define EXTI_LINE_31 (EXTI_DIRECT | EXTI_REG1 | 0x1Fu)
#if defined(UCPD1)
#define EXTI_LINE_32 (EXTI_DIRECT | EXTI_REG2 | 0x00u)
#else
#define EXTI_LINE_32 (EXTI_RESERVED | EXTI_REG2 | 0x00u)
-#endif
+#endif /* UCPD1 */
#if defined(UCPD2)
#define EXTI_LINE_33 (EXTI_DIRECT | EXTI_REG2 | 0x01u)
#else
#define EXTI_LINE_33 (EXTI_RESERVED | EXTI_REG2 | 0x01u)
-#endif
+#endif /* UCPD2 */
#if defined(STM32G0C1xx) || defined(STM32G0B1xx)
#define EXTI_LINE_34 (EXTI_CONFIG | EXTI_REG2 | 0x02u)
#else
#define EXTI_LINE_34 (EXTI_RESERVED | EXTI_REG2 | 0x02u)
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
#if defined(LPUART2)
#define EXTI_LINE_35 (EXTI_DIRECT | EXTI_REG2 | 0x03u)
#else
#define EXTI_LINE_35 (EXTI_RESERVED | EXTI_REG2 | 0x03u)
-#endif
+#endif /* LPUART2 */
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
#define EXTI_LINE_36 (EXTI_DIRECT | EXTI_REG2 | 0x04u)
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/**
* @}
*/
@@ -218,7 +218,7 @@
#define EXTI_GPIOD 0x00000003u
#if defined(GPIOE)
#define EXTI_GPIOE 0x00000004u
-#endif
+#endif /* GPIOE */
#define EXTI_GPIOF 0x00000005u
/**
* @}
@@ -285,7 +285,7 @@
#define EXTI_LINE_NB 32uL
#else
#define EXTI_LINE_NB 32uL
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @}
@@ -325,7 +325,7 @@
((__PORT__) == EXTI_GPIOC) || \
((__PORT__) == EXTI_GPIOD) || \
((__PORT__) == EXTI_GPIOF))
-#endif
+#endif /* GPIOE */
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u)
diff --git a/Inc/stm32g0xx_hal_flash.h b/Inc/stm32g0xx_hal_flash.h
index 456bb4e..1d2554c 100644
--- a/Inc/stm32g0xx_hal_flash.h
+++ b/Inc/stm32g0xx_hal_flash.h
@@ -117,8 +117,8 @@
to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/
uint32_t PCROP2BEndAddr; /*!< PCROP End address (used for OPTIONBYTE_PCROP). It represents first address of end block
to protect. Make sure this parameter is multiple of PCROP granularity: 512 Bytes.*/
-#endif
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
+#endif /* FLASH_PCROP_SUPPORT */
#if defined(FLASH_SECURABLE_MEMORY_SUPPORT)
uint32_t BootEntryPoint; /*!< Allow to force a unique boot entry point to Flash or system Flash */
uint32_t SecSize; /*!< This parameter defines securable memory area width in number of pages starting from Flash base address.
@@ -128,13 +128,13 @@
uint32_t SecSize2; /*!< This parameter defines securable memory area width in number of pages starting from 2nd Bank start address.
This parameter must be a value between [0] and [FLASH_PAGE_NB],
[0] meaning no secure area defined, [1] meaning first page only protected, etc... */
-#endif
-#endif
+#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */
+#endif /* FLASH_DBANK_SUPPORT */
} FLASH_OBProgramInitTypeDef;
/**
-* @brief FLASH handle Structure definition
-*/
+ * @brief FLASH handle Structure definition
+ */
typedef struct
{
HAL_LockTypeDef Lock; /* FLASH locking object */
@@ -196,18 +196,18 @@
#define FLASH_FLAG_BSY1 ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_BSY1_Pos) /*!< FLASH Operation Busy flag for Bank 1 */
#if defined(FLASH_DBANK_SUPPORT)
#define FLASH_FLAG_BSY2 ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_BSY2_Pos) /*!< FLASH Operation Busy flag for Bank 2 */
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
#define FLASH_FLAG_BSY FLASH_FLAG_BSY1 /*!< FLASH Operation Busy flag - legacy name for single bank */
#define FLASH_FLAG_CFGBSY ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_CFGBSY_Pos) /*!< FLASH Configuration Busy flag */
#if defined(FLASH_DBANK_SUPPORT)
#define FLASH_FLAG_PESD ((FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS) | FLASH_SR_PESD_Pos) /*!< FLASH Programming/erase operation suspended */
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
#define FLASH_FLAG_ECCC1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCC_Pos) /*!< FLASH ECC correction on bank 1 */
#define FLASH_FLAG_ECCD1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCD_Pos) /*!< FLASH ECC detection on bank 1 */
#if defined(FLASH_DBANK_SUPPORT)
#define FLASH_FLAG_ECCC2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCC_Pos) /*!< FLASH ECC correction on bank 2 */
#define FLASH_FLAG_ECCD2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCD_Pos) /*!< FLASH ECC detection on bank 2 */
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
#define FLASH_FLAG_ECCC FLASH_FLAG_ECCC1 /*!< FLASH ECC correction - legacy name for single bank */
#define FLASH_FLAG_ECCD FLASH_FLAG_ECCD1 /*!< FLASH ECC detection - legacy name for single bank */
/**
@@ -222,11 +222,11 @@
#define FLASH_IT_OPERR ((FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS) | FLASH_CR_ERRIE_Pos) /*!< Error Interrupt source */
#if defined(FLASH_PCROP_SUPPORT)
#define FLASH_IT_RDERR ((FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS) | FLASH_CR_RDERRIE_Pos) /*!< PCROP Read Error Interrupt source*/
-#endif
+#endif /* FLASH_PCROP_SUPPORT */
#define FLASH_IT_ECCC1 ((FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS) | FLASH_ECCR_ECCCIE_Pos) /*!< ECC Correction on Bank 1 Interrupt source */
#if defined(FLASH_DBANK_SUPPORT)
#define FLASH_IT_ECCC2 ((FLASH_FLAG_ECCR2_ID << FLASH_FLAG_REG_POS) | FLASH_ECC2R_ECCCIE_Pos) /*!< ECC Correction on Bank 2 Interrupt source */
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
#define FLASH_IT_ECCC FLASH_IT_ECCC1 /*!< ECC Correction - legacy name for single bank */
/**
* @}
@@ -246,7 +246,7 @@
#define HAL_FLASH_ERROR_FAST FLASH_SR_FASTERR
#if defined(FLASH_PCROP_SUPPORT)
#define HAL_FLASH_ERROR_RD FLASH_SR_RDERR
-#endif
+#endif /* FLASH_PCROP_SUPPORT */
#define HAL_FLASH_ERROR_OPTV FLASH_SR_OPTVERR
#define HAL_FLASH_ERROR_ECCD FLASH_ECCR_ECCD
/**
@@ -268,7 +268,7 @@
#define FLASH_BANK_1 FLASH_CR_MER1 /*!< Bank 1 */
#if defined(FLASH_DBANK_SUPPORT)
#define FLASH_BANK_2 FLASH_CR_MER2 /*!< Bank 2 */
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
/**
* @}
*/
@@ -291,17 +291,17 @@
#define OPTIONBYTE_USER 0x00000004U /*!< USER option byte configuration */
#if defined(FLASH_PCROP_SUPPORT)
#define OPTIONBYTE_PCROP 0x00000008U /*!< PCROP option byte configuration */
-#endif
+#endif /* FLASH_PCROP_SUPPORT */
#if defined(FLASH_SECURABLE_MEMORY_SUPPORT)
#define OPTIONBYTE_SEC 0x00000010U /*!< SEC option byte configuration */
-#endif
+#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */
#if defined(FLASH_PCROP_SUPPORT) && defined(FLASH_SECURABLE_MEMORY_SUPPORT)
#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | \
OPTIONBYTE_PCROP | OPTIONBYTE_SEC) /*!< All option byte configuration */
#else
#define OPTIONBYTE_ALL (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER) /*!< All option byte configuration */
-#endif
+#endif /* FLASH_PCROP_SUPPORT && FLASH_SECURABLE_MEMORY_SUPPORT */
/**
* @}
*/
@@ -314,7 +314,7 @@
#if defined(FLASH_DBANK_SUPPORT)
#define OB_WRPAREA_ZONE2_A 0x00000004U /*!< Flash Bank 2 Zone A */
#define OB_WRPAREA_ZONE2_B 0x00000008U /*!< Flash Bank 2 Zone B */
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
/**
* @}
*/
@@ -336,12 +336,12 @@
#if defined(PWR_BOR_SUPPORT)
#define OB_USER_BOR_EN FLASH_OPTR_BOR_EN /*!< BOR reset enable */
#define OB_USER_BOR_LEV (FLASH_OPTR_BORF_LEV | FLASH_OPTR_BORR_LEV) /*!< BOR reset Level */
-#endif
+#endif /* PWR_BOR_SUPPORT */
#define OB_USER_nRST_STOP FLASH_OPTR_nRST_STOP /*!< Reset generated when entering the stop mode */
#define OB_USER_nRST_STDBY FLASH_OPTR_nRST_STDBY /*!< Reset generated when entering the standby mode */
#if defined(PWR_SHDW_SUPPORT)
#define OB_USER_nRST_SHDW FLASH_OPTR_nRST_SHDW /*!< Reset generated when entering the shutdown mode */
-#endif
+#endif /* PWR_SHDW_SUPPORT */
#define OB_USER_IWDG_SW FLASH_OPTR_IWDG_SW /*!< Independent watchdog selection */
#define OB_USER_IWDG_STOP FLASH_OPTR_IWDG_STOP /*!< Independent watchdog counter freeze in stop mode */
#define OB_USER_IWDG_STDBY FLASH_OPTR_IWDG_STDBY /*!< Independent watchdog counter freeze in standby mode */
@@ -349,17 +349,17 @@
#if defined(FLASH_DBANK_SUPPORT)
#define OB_USER_BANK_SWAP FLASH_OPTR_nSWAP_BANK /*!< Swap bank memory addresses */
#define OB_USER_DUAL_BANK FLASH_OPTR_DUAL_BANK /*!< Select single or dual bank (depending of device memory size) */
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
#define OB_USER_RAM_PARITY_CHECK FLASH_OPTR_RAM_PARITY_CHECK /*!< Sram parity check control */
#define OB_USER_nBOOT_SEL FLASH_OPTR_nBOOT_SEL /*!< Boot Selection */
#define OB_USER_nBOOT1 FLASH_OPTR_nBOOT1 /*!< nBoot1 configuration */
#define OB_USER_nBOOT0 FLASH_OPTR_nBOOT0 /*!< nBoot0 configuration */
#if defined(GPIO_NRST_CONFIG_SUPPORT)
#define OB_USER_NRST_MODE FLASH_OPTR_NRST_MODE /*!< Reset pin configuration */
-#endif
+#endif /* GPIO_NRST_CONFIG_SUPPORT */
#if defined(FLASH_OPTR_IRHEN)
#define OB_USER_INPUT_RESET_HOLDER FLASH_OPTR_IRHEN /*!< Internal reset holder enable */
-#endif
+#endif /* FLASH_OPTR_IRHEN */
#if defined(FLASH_DBANK_SUPPORT)
#if defined(PWR_BOR_SUPPORT) && defined(PWR_SHDW_SUPPORT) && defined(GPIO_NRST_CONFIG_SUPPORT)
@@ -371,12 +371,12 @@
OB_USER_nBOOT0 | OB_USER_NRST_MODE | OB_USER_INPUT_RESET_HOLDER) /*!< all option bits */
#else
#define OB_USER_ALL ( OB_USER_nRST_STOP | \
- OB_USER_nRST_STDBY | OB_USER_IWDG_SW | \
- OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \
- OB_USER_BANK_SWAP | OB_USER_DUAL_BANK | \
- OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \
- OB_USER_nBOOT0) /*!< all option bits */
-#endif
+ OB_USER_nRST_STDBY | OB_USER_IWDG_SW | \
+ OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \
+ OB_USER_BANK_SWAP | OB_USER_DUAL_BANK | \
+ OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \
+ OB_USER_nBOOT0) /*!< all option bits */
+#endif /* PWR_BOR_SUPPORT && PWR_SHDW_SUPPORT && GPIO_NRST_CONFIG_SUPPORT */
#else
#if defined(PWR_BOR_SUPPORT) && defined(PWR_SHDW_SUPPORT) && defined(GPIO_NRST_CONFIG_SUPPORT)
#define OB_USER_ALL (OB_USER_BOR_EN | OB_USER_BOR_LEV | OB_USER_nRST_STOP | \
@@ -386,12 +386,12 @@
OB_USER_nBOOT0 | OB_USER_NRST_MODE | OB_USER_INPUT_RESET_HOLDER) /*!< all option bits */
#else
#define OB_USER_ALL ( OB_USER_nRST_STOP | \
- OB_USER_nRST_STDBY | OB_USER_IWDG_SW | \
- OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \
- OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \
- OB_USER_nBOOT0) /*!< all option bits */
-#endif
-#endif
+ OB_USER_nRST_STDBY | OB_USER_IWDG_SW | \
+ OB_USER_IWDG_STOP | OB_USER_IWDG_STDBY | OB_USER_WWDG_SW | \
+ OB_USER_RAM_PARITY_CHECK | OB_USER_nBOOT_SEL | OB_USER_nBOOT1 | \
+ OB_USER_nBOOT0) /*!< all option bits */
+#endif /* PWR_BOR_SUPPORT && PWR_SHDW_SUPPORT && GPIO_NRST_CONFIG_SUPPORT */
+#endif /* FLASH_DBANK_SUPPORT */
/**
* @}
*/
@@ -420,7 +420,7 @@
/**
* @}
*/
-#endif
+#endif /* PWR_BOR_SUPPORT */
/** @defgroup FLASH_OB_USER_nRST_STOP FLASH Option Bytes User Reset On Stop
* @{
@@ -449,7 +449,7 @@
/**
* @}
*/
-#endif
+#endif /* PWR_SHDW_SUPPORT */
/** @defgroup FLASH_OB_USER_IWDG_SW FLASH Option Bytes User IWDG Type
* @{
@@ -505,7 +505,7 @@
/**
* @}
*/
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
/** @defgroup FLASH_OB_USER_SRAM_PARITY FLASH Option Bytes User SRAM parity
* @{
@@ -553,7 +553,7 @@
/**
* @}
*/
-#endif
+#endif /* GPIO_NRST_CONFIG_SUPPORT */
#if defined(FLASH_OPTR_IRHEN)
/** @defgroup FLASH_OB_USER_INPUT_RESET_HOLDER FLASH Option Bytes User input reset holder bit
@@ -564,7 +564,7 @@
/**
* @}
*/
-#endif
+#endif /* FLASH_OPTR_IRHEN */
#if defined(FLASH_PCROP_SUPPORT)
/** @defgroup FLASH_OB_PCROP_ZONE FLASH Option Bytes PCROP ZONE
@@ -575,7 +575,7 @@
#if defined(FLASH_DBANK_SUPPORT)
#define OB_PCROP_ZONE2_A 0x00000004U /*!< PCROP Bank 2 Zone A */
#define OB_PCROP_ZONE2_B 0x00000008U /*!< PCROP Bank 2 Zone B */
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
/**
* @}
*/
@@ -591,7 +591,7 @@
/**
* @}
*/
-#endif
+#endif /* FLASH_PCROP_SUPPORT */
#if defined(FLASH_SECURABLE_MEMORY_SUPPORT)
/** @defgroup FLASH_OB_SEC_BOOT_LOCK FLASH Option Bytes Secure boot lock
@@ -602,7 +602,7 @@
/**
* @}
*/
-#endif
+#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */
/**
* @}
@@ -672,9 +672,9 @@
*/
/** @defgroup FLASH_Interrupt FLASH Interrupts Macros
- * @brief macros to handle FLASH interrupts
- * @{
- */
+ * @brief macros to handle FLASH interrupts
+ * @{
+ */
/**
* @brief Enable the specified FLASH interrupt.
@@ -698,7 +698,7 @@
#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \
else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { SET_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \
} while(0U)
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
/**
* @brief Disable the specified FLASH interrupt.
@@ -722,7 +722,7 @@
#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { if(((__INTERRUPT__) & (FLASH_FLAG_CR_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->CR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \
else if(((__INTERRUPT__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { CLEAR_BIT(FLASH->ECCR, (1uL << ((__INTERRUPT__) & 0x1Fu))); } \
} while(0U)
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
/**
* @brief Check whether the specified FLASH flag is set or not.
@@ -754,15 +754,15 @@
*/
#if defined(FLASH_DBANK_SUPPORT)
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) ? \
- (READ_BIT(FLASH->SR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \
- ((((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) ? \
- (READ_BIT(FLASH->ECCR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \
- (READ_BIT(FLASH->ECC2R, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u)))
+ (READ_BIT(FLASH->SR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \
+ ((((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) ? \
+ (READ_BIT(FLASH->ECCR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \
+ (READ_BIT(FLASH->ECC2R, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u)))
#else
#define __HAL_FLASH_GET_FLAG(__FLAG__) ((((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) ? \
- (READ_BIT(FLASH->SR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \
- (READ_BIT(FLASH->ECCR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u))
-#endif
+ (READ_BIT(FLASH->SR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u) : \
+ (READ_BIT(FLASH->ECCR, (1uL << ((__FLAG__) & 0x1Fu))) != 0x00u))
+#endif /* FLASH_DBANK_SUPPORT */
/**
* @brief Clear the FLASH pending flags.
@@ -797,7 +797,7 @@
#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { if(((__FLAG__) & (FLASH_FLAG_SR_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->SR = (1uL << ((__FLAG__) & 0x1Fu)); } \
else if(((__FLAG__) & (FLASH_FLAG_ECCR1_ID << FLASH_FLAG_REG_POS)) != 0U) { FLASH->ECCR = (1uL << ((__FLAG__) & 0x1Fu)); } \
} while(0U)
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
/**
* @}
*/
@@ -883,7 +883,8 @@
#define FLASH_SALES_TYPE_1 (0x2UL << FLASH_SALES_TYPE_Pos) /*!< 0x02000000 */
#define FLASH_SALES_VALUE ((*((uint32_t *)PACKAGE_BASE)) & (FLASH_SALES_TYPE))
#define OB_DUAL_BANK_VALUE ((*((uint32_t *)OB_DUAL_BANK_BASE)) & (FLASH_OPTR_DUAL_BANK))
-#define FLASH_BANK_NB (((FLASH_SALES_VALUE == 0U) || ((FLASH_SALES_VALUE == FLASH_SALES_TYPE_0) && (OB_DUAL_BANK_VALUE == 0U)))?1U:2U)
+#define FLASH_BANK_NB (((FLASH_SALES_VALUE == 0U)\
+ || ((FLASH_SALES_VALUE == FLASH_SALES_TYPE_0) && (OB_DUAL_BANK_VALUE == 0U)))?1U:2U)
#define FLASH_BANK_SIZE ((FLASH_BANK_NB==1U)?(FLASH_SIZE):(FLASH_SIZE >> 1U)) /*!< FLASH Bank Size. Divided by 2 if 2 Banks */
#else /* FLASH_DBANK_SUPPORT */
#define FLASH_BANK_SIZE (FLASH_SIZE) /*!< FLASH Bank Size */
@@ -896,21 +897,21 @@
#if defined(FLASH_PCROP_SUPPORT)
#define FLASH_SR_ERRORS (FLASH_SR_OPERR | FLASH_SR_PROGERR | FLASH_SR_WRPERR | \
- FLASH_SR_PGAERR | FLASH_SR_SIZERR | FLASH_SR_PGSERR | \
- FLASH_SR_MISERR | FLASH_SR_FASTERR | FLASH_SR_RDERR | \
- FLASH_SR_OPTVERR) /*!< All SR error flags */
+ FLASH_SR_PGAERR | FLASH_SR_SIZERR | FLASH_SR_PGSERR | \
+ FLASH_SR_MISERR | FLASH_SR_FASTERR | FLASH_SR_RDERR | \
+ FLASH_SR_OPTVERR) /*!< All SR error flags */
#else
#define FLASH_SR_ERRORS (FLASH_SR_OPERR | FLASH_SR_PROGERR | FLASH_SR_WRPERR | \
- FLASH_SR_PGAERR | FLASH_SR_SIZERR | FLASH_SR_PGSERR | \
- FLASH_SR_MISERR | FLASH_SR_FASTERR | \
- FLASH_SR_OPTVERR) /*!< All SR error flags */
-#endif
+ FLASH_SR_PGAERR | FLASH_SR_SIZERR | FLASH_SR_PGSERR | \
+ FLASH_SR_MISERR | FLASH_SR_FASTERR | \
+ FLASH_SR_OPTVERR) /*!< All SR error flags */
+#endif /* FLASH_PCROP_SUPPORT */
#if defined(FLASH_DBANK_SUPPORT)
#define FLASH_SR_CLEAR (FLASH_SR_ERRORS | FLASH_SR_EOP | FLASH_SR_PESD)
#else
#define FLASH_SR_CLEAR (FLASH_SR_ERRORS | FLASH_SR_EOP)
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
/* Internal defines for HAL macro usage */
#define FLASH_FLAG_REG_POS 16u
@@ -925,35 +926,42 @@
/* Private macros ------------------------------------------------------------*/
/** @defgroup FLASH_Private_Macros FLASH Private Macros
- * @{
- */
-#define IS_FLASH_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL)))
+ * @{
+ */
+#define IS_FLASH_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE))\
+ && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL)))
-#define IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_BANK_SIZE - 1UL)))
+#define IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE))\
+ && ((__ADDRESS__) <= (FLASH_BASE + FLASH_BANK_SIZE - 1UL)))
#if defined(FLASH_DBANK_SUPPORT)
-#define IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE + FLASH_BANK_SIZE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL)))
-#endif
+#define IS_FLASH_MAIN_SECONDHALF_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE + FLASH_BANK_SIZE))\
+ && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 1UL)))
+#endif /* FLASH_DBANK_SUPPORT */
-#define IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 8UL)))
+#define IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE))\
+ && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 8UL)))
-#define IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= 0x1FFF7000U) && ((__ADDRESS__) <= (0x1FFF7400U - 8UL)))
+#define IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= 0x1FFF7000U)\
+ && ((__ADDRESS__) <= (0x1FFF7400U - 8UL)))
-#define IS_FLASH_PROGRAM_ADDRESS(__ADDRESS__) ((IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__)) || (IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__)))
+#define IS_FLASH_PROGRAM_ADDRESS(__ADDRESS__) ((IS_FLASH_PROGRAM_MAIN_MEM_ADDRESS(__ADDRESS__))\
+ || (IS_FLASH_PROGRAM_OTP_ADDRESS(__ADDRESS__)))
-#define IS_FLASH_FAST_PROGRAM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE)) && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 256UL)))
+#define IS_FLASH_FAST_PROGRAM_ADDRESS(__ADDRESS__) (((__ADDRESS__) >= (FLASH_BASE))\
+ && ((__ADDRESS__) <= (FLASH_BASE + FLASH_SIZE - 256UL)))
#define IS_FLASH_PAGE(__PAGE__) ((__PAGE__) < FLASH_PAGE_NB)
#if defined(FLASH_DBANK_SUPPORT)
#define IS_FLASH_BANK(__BANK__) \
- ((FLASH_BANK_NB == 2U) ? \
- (((__BANK__) == FLASH_BANK_1) || \
- ((__BANK__) == FLASH_BANK_2) || \
- ((__BANK__) == (FLASH_BANK_2 | FLASH_BANK_1))): \
- ((__BANK__) == FLASH_BANK_1))
+ ((FLASH_BANK_NB == 2U) ? \
+ (((__BANK__) == FLASH_BANK_1) || \
+ ((__BANK__) == FLASH_BANK_2) || \
+ ((__BANK__) == (FLASH_BANK_2 | FLASH_BANK_1))): \
+ ((__BANK__) == FLASH_BANK_1))
#else
#define IS_FLASH_BANK(__BANK__) ((__BANK__) == FLASH_BANK_1)
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
#define IS_FLASH_TYPEERASE(__VALUE__) (((__VALUE__) == FLASH_TYPEERASE_PAGES) || \
((__VALUE__) == FLASH_TYPEERASE_MASS))
@@ -962,17 +970,18 @@
((__VALUE__) == FLASH_TYPEPROGRAM_FAST))
#define IS_OPTIONBYTE(__VALUE__) ((((__VALUE__) & OPTIONBYTE_ALL) != 0x00U) && \
- (((__VALUE__) & ~OPTIONBYTE_ALL) == 0x00U))
+ (((__VALUE__) & ~OPTIONBYTE_ALL) == 0x00U))
#if defined(FLASH_DBANK_SUPPORT)
#define IS_OB_WRPAREA(__VALUE__) \
- ((FLASH_BANK_NB == 2U) ? \
- (((__VALUE__) == OB_WRPAREA_ZONE_A) || ((__VALUE__) == OB_WRPAREA_ZONE_B) || \
- ((__VALUE__) == OB_WRPAREA_ZONE2_A) || ((__VALUE__) == OB_WRPAREA_ZONE2_B)) : \
- (((__VALUE__) == OB_WRPAREA_ZONE_A) || ((__VALUE__) == OB_WRPAREA_ZONE_B)))
+ ((FLASH_BANK_NB == 2U) ? \
+ (((__VALUE__) == OB_WRPAREA_ZONE_A) || ((__VALUE__) == OB_WRPAREA_ZONE_B) || \
+ ((__VALUE__) == OB_WRPAREA_ZONE2_A) || ((__VALUE__) == OB_WRPAREA_ZONE2_B)) : \
+ (((__VALUE__) == OB_WRPAREA_ZONE_A) || ((__VALUE__) == OB_WRPAREA_ZONE_B)))
#else
-#define IS_OB_WRPAREA(__VALUE__) (((__VALUE__) == OB_WRPAREA_ZONE_A) || ((__VALUE__) == OB_WRPAREA_ZONE_B))
-#endif
+#define IS_OB_WRPAREA(__VALUE__) (((__VALUE__) == OB_WRPAREA_ZONE_A)\
+ || ((__VALUE__) == OB_WRPAREA_ZONE_B))
+#endif /* FLASH_DBANK_SUPPORT */
#define IS_OB_RDP_LEVEL(__LEVEL__) (((__LEVEL__) == OB_RDP_LEVEL_0) ||\
((__LEVEL__) == OB_RDP_LEVEL_1) ||\
@@ -986,20 +995,22 @@
#if defined(FLASH_PCROP_SUPPORT)
#if defined(FLASH_DBANK_SUPPORT)
#define IS_OB_PCROP_CONFIG(__CONFIG__) \
- ((FLASH_BANK_NB == 2U) ? \
- (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | \
- OB_PCROP_ZONE2_A | OB_PCROP_ZONE2_B | OB_PCROP_RDP_ERASE)) == 0x00U): \
- (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | OB_PCROP_RDP_ERASE)) == 0x00U))
+ ((FLASH_BANK_NB == 2U) ? \
+ (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | \
+ OB_PCROP_ZONE2_A | OB_PCROP_ZONE2_B | OB_PCROP_RDP_ERASE)) == 0x00U): \
+ (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | OB_PCROP_RDP_ERASE)) == 0x00U))
#else
-#define IS_OB_PCROP_CONFIG(__CONFIG__) (((__CONFIG__) & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | OB_PCROP_RDP_ERASE)) == 0x00U)
-#endif
-#endif
+#define IS_OB_PCROP_CONFIG(__CONFIG__) (((__CONFIG__)\
+ & ~(OB_PCROP_ZONE_A | OB_PCROP_ZONE_B | OB_PCROP_RDP_ERASE)) == 0x00U)
+#endif /* FLASH_DBANK_SUPPORT */
+#endif /* FLASH_PCROP_SUPPORT */
#if defined(FLASH_SECURABLE_MEMORY_SUPPORT)
-#define IS_OB_SEC_BOOT_LOCK(__VALUE__) (((__VALUE__) == OB_BOOT_ENTRY_FORCED_NONE) || ((__VALUE__) == OB_BOOT_ENTRY_FORCED_FLASH))
+#define IS_OB_SEC_BOOT_LOCK(__VALUE__) (((__VALUE__) == OB_BOOT_ENTRY_FORCED_NONE)\
+ || ((__VALUE__) == OB_BOOT_ENTRY_FORCED_FLASH))
#define IS_OB_SEC_SIZE(__VALUE__) ((__VALUE__) < (FLASH_PAGE_NB + 1U))
-#endif
+#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */
#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \
((__LATENCY__) == FLASH_LATENCY_1) || \
diff --git a/Inc/stm32g0xx_hal_flash_ex.h b/Inc/stm32g0xx_hal_flash_ex.h
index 753f47b..93f979f 100644
--- a/Inc/stm32g0xx_hal_flash_ex.h
+++ b/Inc/stm32g0xx_hal_flash_ex.h
@@ -71,7 +71,7 @@
void HAL_FLASHEx_ForceFlashEmpty(uint32_t FlashEmpty);
#if defined(FLASH_SECURABLE_MEMORY_SUPPORT)
void HAL_FLASHEx_EnableSecMemProtection(uint32_t Banks);
-#endif
+#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
/**
diff --git a/Inc/stm32g0xx_hal_gpio.h b/Inc/stm32g0xx_hal_gpio.h
index fd89eb3..dcae934 100644
--- a/Inc/stm32g0xx_hal_gpio.h
+++ b/Inc/stm32g0xx_hal_gpio.h
@@ -107,26 +107,25 @@
/** @defgroup GPIO_mode GPIO mode
* @brief GPIO Configuration Mode
- * Elements values convention: 0xX0yz00YZ
- * - X : GPIO mode or EXTI Mode
- * - y : External IT or Event trigger detection
- * - z : IO configuration on External IT or Event
- * - Y : Output type (Push Pull or Open Drain)
- * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * Elements values convention: 0x00WX00YZ
+ * - W : EXTI trigger detection on 3 bits
+ * - X : EXTI mode (IT or Event) on 2 bits
+ * - Y : Output type (Push Pull or Open Drain) on 1 bit
+ * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits
* @{
*/
-#define GPIO_MODE_INPUT (0x00000000u) /*!< Input Floating Mode */
-#define GPIO_MODE_OUTPUT_PP (0x00000001u) /*!< Output Push Pull Mode */
-#define GPIO_MODE_OUTPUT_OD (0x00000011u) /*!< Output Open Drain Mode */
-#define GPIO_MODE_AF_PP (0x00000002u) /*!< Alternate Function Push Pull Mode */
-#define GPIO_MODE_AF_OD (0x00000012u) /*!< Alternate Function Open Drain Mode */
-#define GPIO_MODE_ANALOG (0x00000003u) /*!< Analog Mode */
-#define GPIO_MODE_IT_RISING (0x10110000u) /*!< External Interrupt Mode with Rising edge trigger detection */
-#define GPIO_MODE_IT_FALLING (0x10210000u) /*!< External Interrupt Mode with Falling edge trigger detection */
-#define GPIO_MODE_IT_RISING_FALLING (0x10310000u) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-#define GPIO_MODE_EVT_RISING (0x10120000u) /*!< External Event Mode with Rising edge trigger detection */
-#define GPIO_MODE_EVT_FALLING (0x10220000u) /*!< External Event Mode with Falling edge trigger detection */
-#define GPIO_MODE_EVT_RISING_FALLING (0x10320000u) /*!< External Event Mode with Rising/Falling edge trigger detection */
+#define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */
+#define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */
+#define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection */
/**
* @}
*/
@@ -135,10 +134,10 @@
* @brief GPIO Output Maximum frequency
* @{
*/
-#define GPIO_SPEED_FREQ_LOW (0x00000000u) /*!< Low speed */
-#define GPIO_SPEED_FREQ_MEDIUM (0x00000001u) /*!< Medium speed */
-#define GPIO_SPEED_FREQ_HIGH (0x00000002u) /*!< High speed */
-#define GPIO_SPEED_FREQ_VERY_HIGH (0x00000003u) /*!< Very high speed */
+#define GPIO_SPEED_FREQ_LOW 0x00000000u /*!< Low speed */
+#define GPIO_SPEED_FREQ_MEDIUM 0x00000001u /*!< Medium speed */
+#define GPIO_SPEED_FREQ_HIGH 0x00000002u /*!< High speed */
+#define GPIO_SPEED_FREQ_VERY_HIGH 0x00000003u /*!< Very high speed */
/**
* @}
*/
@@ -147,9 +146,9 @@
* @brief GPIO Pull-Up or Pull-Down Activation
* @{
*/
-#define GPIO_NOPULL (0x00000000u) /*!< No Pull-up or Pull-down activation */
-#define GPIO_PULLUP (0x00000001u) /*!< Pull-up activation */
-#define GPIO_PULLDOWN (0x00000002u) /*!< Pull-down activation */
+#define GPIO_NOPULL 0x00000000u /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP 0x00000001u /*!< Pull-up activation */
+#define GPIO_PULLDOWN 0x00000002u /*!< Pull-down activation */
/**
* @}
*/
@@ -246,6 +245,31 @@
*/
/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+ * @{
+ */
+#define GPIO_MODE_Pos 0u
+#define GPIO_MODE (0x3uL << GPIO_MODE_Pos)
+#define MODE_INPUT (0x0uL << GPIO_MODE_Pos)
+#define MODE_OUTPUT (0x1uL << GPIO_MODE_Pos)
+#define MODE_AF (0x2uL << GPIO_MODE_Pos)
+#define MODE_ANALOG (0x3uL << GPIO_MODE_Pos)
+#define OUTPUT_TYPE_Pos 4u
+#define OUTPUT_TYPE (0x1uL << OUTPUT_TYPE_Pos)
+#define OUTPUT_PP (0x0uL << OUTPUT_TYPE_Pos)
+#define OUTPUT_OD (0x1uL << OUTPUT_TYPE_Pos)
+#define EXTI_MODE_Pos 16u
+#define EXTI_MODE (0x3uL << EXTI_MODE_Pos)
+#define EXTI_IT (0x1uL << EXTI_MODE_Pos)
+#define EXTI_EVT (0x2uL << EXTI_MODE_Pos)
+#define TRIGGER_MODE_Pos 20u
+#define TRIGGER_MODE (0x7uL << TRIGGER_MODE_Pos)
+#define TRIGGER_RISING (0x1uL << TRIGGER_MODE_Pos)
+#define TRIGGER_FALLING (0x2uL << TRIGGER_MODE_Pos)
+/**
+ * @}
+ */
+
/** @defgroup GPIO_Private_Macros GPIO Private Macros
* @{
*/
diff --git a/Inc/stm32g0xx_hal_gpio_ex.h b/Inc/stm32g0xx_hal_gpio_ex.h
index 74d3467..97225c5 100644
--- a/Inc/stm32g0xx_hal_gpio_ex.h
+++ b/Inc/stm32g0xx_hal_gpio_ex.h
@@ -186,7 +186,7 @@
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x0A)
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
#if defined (STM32G0B0xx)
/*------------------------- STM32G0B0xx ------------------------*/
@@ -297,7 +297,7 @@
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x09)
-#endif
+#endif /* STM32G0B0xx */
#if defined (STM32G081xx) || defined (STM32G071xx)
@@ -810,7 +810,7 @@
((__GPIOx__) == (GPIOB))? 1uL :\
((__GPIOx__) == (GPIOC))? 2uL :\
((__GPIOx__) == (GPIOD))? 3uL : 5uL)
-#endif
+#endif /* GPIOE */
/**
* @}
diff --git a/Inc/stm32g0xx_hal_hcd.h b/Inc/stm32g0xx_hal_hcd.h
index 22b349d..d849cde 100644
--- a/Inc/stm32g0xx_hal_hcd.h
+++ b/Inc/stm32g0xx_hal_hcd.h
@@ -6,7 +6,7 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2020 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
@@ -28,7 +28,7 @@
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_ll_usb.h"
-
+#if defined (USB_DRD_FS)
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
@@ -129,7 +129,16 @@
*/
#define HCD_SPEED_FULL USBH_FSLS_SPEED
#define HCD_SPEED_LOW USBH_FSLS_SPEED
+/**
+ * @}
+ */
+/** @defgroup HCD_Device_Speed HCD Device Speed
+ * @{
+ */
+#define HCD_DEVICE_SPEED_HIGH 0U
+#define HCD_DEVICE_SPEED_FULL 1U
+#define HCD_DEVICE_SPEED_LOW 2U
/**
* @}
*/
@@ -167,7 +176,8 @@
#define __HAL_HCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
#define __HAL_HCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance)\
+ & (__INTERRUPT__)) == (__INTERRUPT__))
#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
@@ -447,14 +457,35 @@
*/
#define HCD_SET_CH_TX_CNT USB_DRD_SET_CHEP_TX_CNT
#define HCD_SET_CH_RX_CNT USB_DRD_SET_CHEP_RX_CNT
+
/**
* @brief gets counter of the tx buffer.
* @param USBx USB peripheral instance register address.
- * @param bChNum Endpoint Number.
+ * @param bChNum channel Number.
* @retval Counter value
*/
#define HCD_GET_CH_TX_CNT USB_DRD_GET_CHEP_TX_CNT
-#define HCD_GET_CH_RX_CNT USB_DRD_GET_CHEP_RX_CNT
+
+/**
+ * @brief gets counter of the rx buffer.
+ * @param Instance USB peripheral instance register address.
+ * @param bChNum channel Number.
+ * @retval Counter value
+ */
+__STATIC_INLINE uint16_t HCD_GET_CH_RX_CNT(HCD_TypeDef *Instance, uint16_t bChNum)
+{
+ UNUSED(Instance);
+ __IO uint32_t count = 10U;
+
+ /* WA: few cycles for RX PMA descriptor to update */
+ while (count > 0U)
+ {
+ count--;
+ }
+
+ return (uint16_t)USB_DRD_GET_CHEP_RX_CNT((Instance), (bChNum));
+}
+
/**
* @brief Gets buffer 0/1 address of a double buffer endpoint.
* @param USBx USB peripheral instance register address.
@@ -468,26 +499,59 @@
#define HCD_SET_CH_DBUF1_CNT USB_DRD_SET_CHEP_DBUF1_CNT
#define HCD_SET_CH_DBUF_CNT USB_DRD_SET_CHEP_DBUF_CNT
+
/**
- * @brief Gets buffer 0/1 rx/tx counter for double buffering.
- * @param USBx USB peripheral instance register address.
- * @param bChNum Endpoint Number.
- * @retval None
+ * @brief gets counter of the rx buffer0.
+ * @param Instance USB peripheral instance register address.
+ * @param bChNum channel Number.
+ * @retval Counter value
*/
-#define HCD_GET_CH_DBUF0_CNT USB_DRD_GET_CHEP_DBUF0_CNT
-#define HCD_GET_CH_DBUF1_CNT USB_DRD_GET_CHEP_DBUF1_CNT
+__STATIC_INLINE uint16_t HCD_GET_CH_DBUF0_CNT(HCD_TypeDef *Instance, uint16_t bChNum)
+{
+ UNUSED(Instance);
+ __IO uint32_t count = 10U;
+
+ /* WA: few cycles for RX PMA descriptor to update */
+ while (count > 0U)
+ {
+ count--;
+ }
+
+ return (uint16_t)USB_DRD_GET_CHEP_DBUF0_CNT((Instance), (bChNum));
+}
+
+/**
+ * @brief gets counter of the rx buffer1.
+ * @param Instance USB peripheral instance register address.
+ * @param bChNum channel Number.
+ * @retval Counter value
+ */
+__STATIC_INLINE uint16_t HCD_GET_CH_DBUF1_CNT(HCD_TypeDef *Instance, uint16_t bChNum)
+{
+ UNUSED(Instance);
+ __IO uint32_t count = 10U;
+
+ /* WA: few cycles for RX PMA descriptor to update */
+ while (count > 0U)
+ {
+ count--;
+ }
+
+ return (uint16_t)USB_DRD_GET_CHEP_DBUF1_CNT((Instance), (bChNum));
+}
+
/**
* @}
*/
/* Private functions prototypes ----------------------------------------------*/
- /**
+/**
* @}
*/
- /**
+/**
* @}
*/
-
+#endif /* defined (USB_DRD_FS) */
#ifdef __cplusplus
}
diff --git a/Inc/stm32g0xx_hal_i2c.h b/Inc/stm32g0xx_hal_i2c.h
index e05d5fa..70394b7 100644
--- a/Inc/stm32g0xx_hal_i2c.h
+++ b/Inc/stm32g0xx_hal_i2c.h
@@ -48,29 +48,30 @@
typedef struct
{
uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
- This parameter calculated by referring to I2C initialization
- section in Reference manual */
+ This parameter calculated by referring to I2C initialization section
+ in Reference manual */
uint32_t OwnAddress1; /*!< Specifies the first device own address.
- This parameter can be a 7-bit or 10-bit address. */
+ This parameter can be a 7-bit or 10-bit address. */
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
- This parameter can be a value of @ref I2C_ADDRESSING_MODE */
+ This parameter can be a value of @ref I2C_ADDRESSING_MODE */
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
- This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
+ This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
- This parameter can be a 7-bit address. */
+ This parameter can be a 7-bit address. */
- uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
- This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing
+ mode is selected.
+ This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
- This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
+ This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
- This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
+ This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
} I2C_InitTypeDef;
@@ -200,7 +201,8 @@
__IO uint32_t PreviousState; /*!< I2C communication Previous state */
- HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources); /*!< I2C transfer IRQ handler function pointer */
+ HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+ /*!< I2C transfer IRQ handler function pointer */
DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
@@ -217,20 +219,32 @@
__IO uint32_t AddrEventCount; /*!< I2C Address Event counter */
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
- void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Tx Transfer completed callback */
- void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Master Rx Transfer completed callback */
- void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Tx Transfer completed callback */
- void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Slave Rx Transfer completed callback */
- void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Listen Complete callback */
- void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Tx Transfer completed callback */
- void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Memory Rx Transfer completed callback */
- void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Error callback */
- void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Abort callback */
+ void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+ /*!< I2C Master Tx Transfer completed callback */
+ void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+ /*!< I2C Master Rx Transfer completed callback */
+ void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+ /*!< I2C Slave Tx Transfer completed callback */
+ void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+ /*!< I2C Slave Rx Transfer completed callback */
+ void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+ /*!< I2C Listen Complete callback */
+ void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+ /*!< I2C Memory Tx Transfer completed callback */
+ void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+ /*!< I2C Memory Rx Transfer completed callback */
+ void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c);
+ /*!< I2C Error callback */
+ void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c);
+ /*!< I2C Abort callback */
- void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< I2C Slave Address Match callback */
+ void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+ /*!< I2C Slave Address Match callback */
- void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp Init callback */
- void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c); /*!< I2C Msp DeInit callback */
+ void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c);
+ /*!< I2C Msp Init callback */
+ void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c);
+ /*!< I2C Msp DeInit callback */
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
} I2C_HandleTypeDef;
@@ -259,8 +273,11 @@
/**
* @brief HAL I2C Callback pointer definition
*/
-typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
-typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
+typedef void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c);
+/*!< pointer to an I2C callback function */
+typedef void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection,
+ uint16_t AddrMatchCode);
+/*!< pointer to an I2C Address Match callback function */
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
/**
@@ -440,14 +457,14 @@
* @retval None
*/
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
-#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \
- (__HANDLE__)->State = HAL_I2C_STATE_RESET; \
- (__HANDLE__)->MspInitCallback = NULL; \
- (__HANDLE__)->MspDeInitCallback = NULL; \
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_I2C_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
} while(0)
#else
#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
-#endif
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
/** @brief Enable the specified I2C interrupt.
* @param __HANDLE__ specifies the I2C Handle.
@@ -495,7 +512,8 @@
*
* @retval The new state of __INTERRUPT__ (SET or RESET).
*/
-#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & \
+ (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Check whether the specified I2C flag is set or not.
* @param __HANDLE__ specifies the I2C Handle.
@@ -521,7 +539,8 @@
* @retval The new state of __FLAG__ (SET or RESET).
*/
#define I2C_FLAG_MASK (0x0001FFFFU)
-#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & \
+ (__FLAG__)) == (__FLAG__)) ? SET : RESET)
/** @brief Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
* @param __HANDLE__ specifies the I2C Handle.
@@ -540,26 +559,27 @@
*
* @retval None
*/
-#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
- : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? \
+ ((__HANDLE__)->Instance->ISR |= (__FLAG__)) : \
+ ((__HANDLE__)->Instance->ICR = (__FLAG__)))
/** @brief Enable the specified I2C peripheral.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
-#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+#define __HAL_I2C_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
/** @brief Disable the specified I2C peripheral.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
-#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+#define __HAL_I2C_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
/** @brief Generate a Non-Acknowledge I2C peripheral in Slave mode.
* @param __HANDLE__ specifies the I2C Handle.
* @retval None
*/
-#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
+#define __HAL_I2C_GENERATE_NACK(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
/**
* @}
*/
@@ -583,7 +603,8 @@
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID,
+ pI2C_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
@@ -598,49 +619,72 @@
*/
/* IO operation functions ****************************************************/
/******* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials,
+ uint32_t Timeout);
/******* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions);
HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
/******* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions);
/**
* @}
*/
/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
- * @{
- */
+ * @{
+ */
/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
@@ -732,10 +776,15 @@
#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME) || \
((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
-#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+#define I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \
+ (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \
+ I2C_CR2_NBYTES | I2C_CR2_RELOAD | \
+ I2C_CR2_RD_WRN)))
-#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U))
-#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U))
+#define I2C_GET_ADDR_MATCH(__HANDLE__) ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) \
+ >> 16U))
+#define I2C_GET_DIR(__HANDLE__) ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) \
+ >> 16U))
#define I2C_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
#define I2C_GET_OWN_ADDRESS1(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1))
#define I2C_GET_OWN_ADDRESS2(__HANDLE__) ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2))
@@ -743,13 +792,20 @@
#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FFU)
-#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
+#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & \
+ (uint16_t)(0xFF00U))) >> 8U)))
#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
-#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
- (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \
+ (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \
+ (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \
+ (I2C_CR2_ADD10) | (I2C_CR2_START)) & \
+ (~I2C_CR2_RD_WRN)))
-#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
+#define I2C_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == \
+ ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
/**
* @}
diff --git a/Inc/stm32g0xx_hal_i2c_ex.h b/Inc/stm32g0xx_hal_i2c_ex.h
index 41b5554..00f970e 100644
--- a/Inc/stm32g0xx_hal_i2c_ex.h
+++ b/Inc/stm32g0xx_hal_i2c_ex.h
@@ -38,7 +38,6 @@
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
-
/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
* @{
*/
@@ -68,7 +67,7 @@
#define I2C_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
#else
#define I2C_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */
-#endif
+#endif /* SYSCFG_CFGR1_I2C3_FMP */
/**
* @}
*/
@@ -78,24 +77,50 @@
*/
/* Exported macro ------------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
+/** @defgroup I2CEx_Exported_Macros I2C Extended Exported Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
* @{
*/
-/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
- * @brief Extended features functions
+/** @addtogroup I2CEx_Exported_Functions_Group1 Filter Mode Functions
* @{
*/
-
/* Peripheral Control functions ************************************************/
HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+/**
+ * @}
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions
+ * @{
+ */
HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c);
HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions
+ * @{
+ */
void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
/* Private constants ---------------------------------------------------------*/
/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
@@ -111,7 +136,7 @@
* @{
*/
#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
- ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+ ((FILTER) == I2C_ANALOGFILTER_DISABLE))
#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
@@ -125,9 +150,6 @@
(((__CONFIG__) & (I2C_FASTMODEPLUS_I2C1)) == I2C_FASTMODEPLUS_I2C1) || \
(((__CONFIG__) & (I2C_FASTMODEPLUS_I2C2)) == I2C_FASTMODEPLUS_I2C2) || \
(((__CONFIG__) & (I2C_FASTMODEPLUS_I2C3)) == I2C_FASTMODEPLUS_I2C3)))
-
-
-
/**
* @}
*/
@@ -149,14 +171,6 @@
* @}
*/
-/**
- * @}
- */
-
-/**
- * @}
- */
-
#ifdef __cplusplus
}
#endif
diff --git a/Inc/stm32g0xx_hal_irda.h b/Inc/stm32g0xx_hal_irda.h
index 4329445..cdc75ef 100644
--- a/Inc/stm32g0xx_hal_irda.h
+++ b/Inc/stm32g0xx_hal_irda.h
@@ -78,7 +78,8 @@
/**
* @brief HAL IRDA State definition
- * @note HAL IRDA State value is a combination of 2 different substates: gState and RxState (see @ref IRDA_State_Definition).
+ * @note HAL IRDA State value is a combination of 2 different substates:
+ * gState and RxState (see @ref IRDA_State_Definition).
* - gState contains IRDA state information related to global Handle management
* and also information related to Tx operations.
* gState value coding follow below described bitmap :
@@ -89,7 +90,7 @@
* 11 : Error
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized. HAL IRDA Init function already called)
+ * 1 : Init done (Peripheral initialized. HAL IRDA Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
@@ -106,7 +107,7 @@
* xx : Should be set to 00
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized)
+ * 1 : Init done (Peripheral initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
@@ -247,7 +248,8 @@
Value is allowed for RxState only */
#define HAL_IRDA_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing
Not to be used for neither gState nor RxState.
- Value is result of combination (Or) between gState and RxState values */
+ Value is result of combination (Or) between
+ gState and RxState values */
#define HAL_IRDA_STATE_TIMEOUT 0x000000A0U /*!< Timeout state
Value is allowed for gState only */
#define HAL_IRDA_STATE_ERROR 0x000000E0U /*!< Error
@@ -259,15 +261,15 @@
/** @defgroup IRDA_Error_Definition IRDA Error Code Definition
* @{
*/
-#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
-#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
-#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
-#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004U) /*!< frame error */
-#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
-#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
-#define HAL_IRDA_ERROR_BUSY ((uint32_t)0x00000020U) /*!< Busy Error */
+#define HAL_IRDA_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_IRDA_ERROR_PE (0x00000001U) /*!< Parity error */
+#define HAL_IRDA_ERROR_NE (0x00000002U) /*!< Noise error */
+#define HAL_IRDA_ERROR_FE (0x00000004U) /*!< frame error */
+#define HAL_IRDA_ERROR_ORE (0x00000008U) /*!< Overrun error */
+#define HAL_IRDA_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_IRDA_ERROR_BUSY (0x00000020U) /*!< Busy Error */
#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
-#define HAL_IRDA_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */
+#define HAL_IRDA_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */
#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
/**
* @}
@@ -570,9 +572,14 @@
* @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error)
* @retval None
*/
-#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
- ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? \
+ ((__HANDLE__)->Instance->CR1 |= (1U << \
+ ((__INTERRUPT__) & IRDA_IT_MASK))):\
+ ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? \
+ ((__HANDLE__)->Instance->CR2 |= (1U << \
+ ((__INTERRUPT__) & IRDA_IT_MASK))):\
+ ((__HANDLE__)->Instance->CR3 |= (1U << \
+ ((__INTERRUPT__) & IRDA_IT_MASK))))
/** @brief Disable the specified IRDA interrupt.
* @param __HANDLE__ specifies the IRDA Handle.
@@ -586,10 +593,14 @@
* @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error)
* @retval None
*/
-#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
- ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
-
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? \
+ ((__HANDLE__)->Instance->CR1 &= ~ (1U << \
+ ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? \
+ ((__HANDLE__)->Instance->CR2 &= ~ (1U << \
+ ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << \
+ ((__INTERRUPT__) & IRDA_IT_MASK))))
/** @brief Check whether the specified IRDA interrupt has occurred or not.
* @param __HANDLE__ specifies the IRDA Handle.
@@ -605,8 +616,8 @@
* @arg @ref IRDA_IT_PE Parity Error interrupt
* @retval The new state of __IT__ (SET or RESET).
*/
-#define __HAL_IRDA_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\
- & (0x01U << (((__INTERRUPT__) & IRDA_ISR_MASK)>> IRDA_ISR_POS))) != 0U) ? SET : RESET)
+#define __HAL_IRDA_GET_IT(__HANDLE__, __INTERRUPT__) \
+ ((((__HANDLE__)->Instance->ISR& (0x01U << (((__INTERRUPT__) & IRDA_ISR_MASK)>>IRDA_ISR_POS))) != 0U) ? SET : RESET)
/** @brief Check whether the specified IRDA interrupt source is enabled or not.
* @param __HANDLE__ specifies the IRDA Handle.
@@ -620,9 +631,10 @@
* @arg @ref IRDA_IT_PE Parity Error interrupt
* @retval The new state of __IT__ (SET or RESET).
*/
-#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 : \
- (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 0x02U)? (__HANDLE__)->Instance->CR2 : \
- (__HANDLE__)->Instance->CR3)) & ((uint32_t)0x01U << (((uint16_t)(__INTERRUPT__)) & IRDA_IT_MASK))) != 0U) ? SET : RESET)
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+ ((((((((__INTERRUPT__) & IRDA_CR_MASK) >>IRDA_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 :(((((__INTERRUPT__) \
+ & IRDA_CR_MASK) >> IRDA_CR_POS)== 0x02U)? (__HANDLE__)->Instance->CR2 :(__HANDLE__)->Instance->CR3)) \
+ & (0x01U <<(((uint16_t)(__INTERRUPT__)) & IRDA_IT_MASK))) != 0U) ? SET : RESET)
/** @brief Clear the specified IRDA ISR flag, in setting the proper ICR register flag.
* @param __HANDLE__ specifies the IRDA Handle.
diff --git a/Inc/stm32g0xx_hal_irda_ex.h b/Inc/stm32g0xx_hal_irda_ex.h
index e67542b..9ce590d 100644
--- a/Inc/stm32g0xx_hal_irda_ex.h
+++ b/Inc/stm32g0xx_hal_irda_ex.h
@@ -220,7 +220,7 @@
(__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
} \
} while(0U)
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/** @brief Compute the mask to apply to retrieve the received data
* according to the word length and to the parity bits activation.
diff --git a/Inc/stm32g0xx_hal_iwdg.h b/Inc/stm32g0xx_hal_iwdg.h
index 23b3953..0650bf1 100644
--- a/Inc/stm32g0xx_hal_iwdg.h
+++ b/Inc/stm32g0xx_hal_iwdg.h
@@ -87,7 +87,6 @@
#define IWDG_PRESCALER_64 IWDG_PR_PR_2 /*!< IWDG prescaler set to 64 */
#define IWDG_PRESCALER_128 (IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */
#define IWDG_PRESCALER_256 (IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */
-
/**
* @}
*/
@@ -100,7 +99,6 @@
* @}
*/
-
/**
* @}
*/
@@ -138,7 +136,7 @@
* @{
*/
/* Initialization/Start functions ********************************************/
-HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
/**
* @}
*/
@@ -147,7 +145,7 @@
* @{
*/
/* I/O operation functions ****************************************************/
-HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
/**
* @}
*/
diff --git a/Inc/stm32g0xx_hal_lptim.h b/Inc/stm32g0xx_hal_lptim.h
index bf6ef20..8faa4ad 100644
--- a/Inc/stm32g0xx_hal_lptim.h
+++ b/Inc/stm32g0xx_hal_lptim.h
@@ -98,30 +98,30 @@
*/
typedef struct
{
- LPTIM_ClockConfigTypeDef Clock; /*!< Specifies the clock parameters */
+ LPTIM_ClockConfigTypeDef Clock; /*!< Specifies the clock parameters */
- LPTIM_ULPClockConfigTypeDef UltraLowPowerClock; /*!< Specifies the Ultra Low Power clock parameters */
+ LPTIM_ULPClockConfigTypeDef UltraLowPowerClock;/*!< Specifies the Ultra Low Power clock parameters */
- LPTIM_TriggerConfigTypeDef Trigger; /*!< Specifies the Trigger parameters */
+ LPTIM_TriggerConfigTypeDef Trigger; /*!< Specifies the Trigger parameters */
- uint32_t OutputPolarity; /*!< Specifies the Output polarity.
- This parameter can be a value of @ref LPTIM_Output_Polarity */
+ uint32_t OutputPolarity; /*!< Specifies the Output polarity.
+ This parameter can be a value of @ref LPTIM_Output_Polarity */
- uint32_t UpdateMode; /*!< Specifies whether the update of the autoreload and the compare
- values is done immediately or after the end of current period.
- This parameter can be a value of @ref LPTIM_Updating_Mode */
+ uint32_t UpdateMode; /*!< Specifies whether the update of the autoreload and the compare
+ values is done immediately or after the end of current period.
+ This parameter can be a value of @ref LPTIM_Updating_Mode */
- uint32_t CounterSource; /*!< Specifies whether the counter is incremented each internal event
- or each external event.
- This parameter can be a value of @ref LPTIM_Counter_Source */
+ uint32_t CounterSource; /*!< Specifies whether the counter is incremented each internal event
+ or each external event.
+ This parameter can be a value of @ref LPTIM_Counter_Source */
- uint32_t Input1Source; /*!< Specifies source selected for input1 (GPIO or comparator output).
- This parameter can be a value of @ref LPTIM_Input1_Source */
+ uint32_t Input1Source; /*!< Specifies source selected for input1 (GPIO or comparator output).
+ This parameter can be a value of @ref LPTIM_Input1_Source */
- uint32_t Input2Source; /*!< Specifies source selected for input2 (GPIO or comparator output).
- Note: This parameter is used only for encoder feature so is used only
- for LPTIM1 instance.
- This parameter can be a value of @ref LPTIM_Input2_Source */
+ uint32_t Input2Source; /*!< Specifies source selected for input2 (GPIO or comparator output).
+ Note: This parameter is used only for encoder feature so is used only
+ for LPTIM1 instance.
+ This parameter can be a value of @ref LPTIM_Input2_Source */
} LPTIM_InitTypeDef;
/**
@@ -378,10 +378,10 @@
*/
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) do { \
- (__HANDLE__)->State = HAL_LPTIM_STATE_RESET; \
- (__HANDLE__)->MspInitCallback = NULL; \
- (__HANDLE__)->MspDeInitCallback = NULL; \
- } while(0)
+ (__HANDLE__)->State = HAL_LPTIM_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
#else
#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET)
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
@@ -531,7 +531,8 @@
* @retval Interrupt status.
*/
-#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER\
+ & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/**
* @brief Enable the LPTIM1 EXTI line in interrupt mode.
@@ -543,7 +544,8 @@
* @brief Disable the LPTIM1 EXTI line in interrupt mode.
* @retval None
*/
-#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(LPTIM_EXTI_LINE_LPTIM1))
+#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() (EXTI->IMR1\
+ &= ~(LPTIM_EXTI_LINE_LPTIM1))
/**
@@ -556,7 +558,8 @@
* @brief Disable the LPTIM1 EXTI line in event mode.
* @retval None
*/
-#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(LPTIM_EXTI_LINE_LPTIM1))
+#define __HAL_LPTIM_LPTIM1_EXTI_DISABLE_EVENT() (EXTI->EMR1\
+ &= ~(LPTIM_EXTI_LINE_LPTIM1))
/**
* @brief Enable the LPTIM2 EXTI line in interrupt mode.
@@ -568,7 +571,8 @@
* @brief Disable the LPTIM2 EXTI line in interrupt mode.
* @retval None
*/
-#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(LPTIM_EXTI_LINE_LPTIM2))
+#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT() (EXTI->IMR1\
+ &= ~(LPTIM_EXTI_LINE_LPTIM2))
/**
@@ -581,7 +585,8 @@
* @brief Disable the LPTIM2 EXTI line in event mode.
* @retval None
*/
-#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(LPTIM_EXTI_LINE_LPTIM2))
+#define __HAL_LPTIM_LPTIM2_EXTI_DISABLE_EVENT() (EXTI->EMR1\
+ &= ~(LPTIM_EXTI_LINE_LPTIM2))
/**
* @}
@@ -593,9 +598,9 @@
*/
/** @addtogroup LPTIM_Exported_Functions_Group1
- * @brief Initialization and Configuration functions.
- * @{
- */
+ * @brief Initialization and Configuration functions.
+ * @{
+ */
/* Initialization/de-initialization functions ********************************/
HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim);
HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim);
@@ -608,9 +613,9 @@
*/
/** @addtogroup LPTIM_Exported_Functions_Group2
- * @brief Start-Stop operation functions.
- * @{
- */
+ * @brief Start-Stop operation functions.
+ * @{
+ */
/* Start/Stop operation functions *********************************************/
/* ################################# PWM Mode ################################*/
/* Blocking mode: Polling */
@@ -664,9 +669,9 @@
*/
/** @addtogroup LPTIM_Exported_Functions_Group3
- * @brief Read operation functions.
- * @{
- */
+ * @brief Read operation functions.
+ * @{
+ */
/* Reading operation functions ************************************************/
uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim);
uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim);
@@ -676,9 +681,9 @@
*/
/** @addtogroup LPTIM_Exported_Functions_Group4
- * @brief LPTIM IRQ handler and callback functions.
- * @{
- */
+ * @brief LPTIM IRQ handler and callback functions.
+ * @{
+ */
/* LPTIM IRQ functions *******************************************************/
void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim);
@@ -693,7 +698,8 @@
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID, pLPTIM_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID,
+ pLPTIM_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
/**
@@ -701,9 +707,9 @@
*/
/** @addtogroup LPTIM_Group5
- * @brief Peripheral State functions.
- * @{
- */
+ * @brief Peripheral State functions.
+ * @{
+ */
/* Peripheral State functions ************************************************/
HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim);
/**
@@ -807,20 +813,20 @@
#define IS_LPTIM_PULSE(__PULSE__) ((__PULSE__) <= 0x0000FFFFUL)
#define IS_LPTIM_INPUT1_SOURCE(__INSTANCE__, __SOURCE__) \
- ((((__INSTANCE__) == LPTIM1) && \
- (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \
- ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1))) \
- || \
- (((__INSTANCE__) == LPTIM2) && \
- (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \
- ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1) || \
- ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP2) || \
- ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1_COMP2))))
+ ((((__INSTANCE__) == LPTIM1) && \
+ (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \
+ ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1))) \
+ || \
+ (((__INSTANCE__) == LPTIM2) && \
+ (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) || \
+ ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1) || \
+ ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP2) || \
+ ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1_COMP2))))
#define IS_LPTIM_INPUT2_SOURCE(__INSTANCE__, __SOURCE__) \
- (((__INSTANCE__) == LPTIM1) && \
- (((__SOURCE__) == LPTIM_INPUT2SOURCE_GPIO) || \
- ((__SOURCE__) == LPTIM_INPUT2SOURCE_COMP2)))
+ (((__INSTANCE__) == LPTIM1) && \
+ (((__SOURCE__) == LPTIM_INPUT2SOURCE_GPIO) || \
+ ((__SOURCE__) == LPTIM_INPUT2SOURCE_COMP2)))
/**
* @}
diff --git a/Inc/stm32g0xx_hal_pcd.h b/Inc/stm32g0xx_hal_pcd.h
index 8e7aa56..5f3e294 100644
--- a/Inc/stm32g0xx_hal_pcd.h
+++ b/Inc/stm32g0xx_hal_pcd.h
@@ -6,7 +6,7 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2020 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
@@ -190,8 +190,11 @@
#define __HAL_PCD_ENABLE(__HANDLE__) (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
#define __HAL_PCD_DISABLE(__HANDLE__) (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= (uint16_t)(~(__INTERRUPT__)))
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance)\
+ & (__INTERRUPT__)) == (__INTERRUPT__))
+
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR)\
+ &= (uint16_t)(~(__INTERRUPT__)))
#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR2 |= USB_WAKEUP_EXTI_LINE
#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR2 &= ~(USB_WAKEUP_EXTI_LINE)
@@ -528,7 +531,26 @@
* @retval Counter value
*/
#define PCD_GET_EP_TX_CNT USB_DRD_GET_CHEP_TX_CNT
-#define PCD_GET_EP_RX_CNT USB_DRD_GET_CHEP_RX_CNT
+
+/**
+ * @brief gets counter of the rx buffer.
+ * @param Instance USB peripheral instance register address.
+ * @param bEpNum channel Number.
+ * @retval Counter value
+ */
+__STATIC_INLINE uint16_t PCD_GET_EP_RX_CNT(PCD_TypeDef *Instance, uint16_t bEpNum)
+{
+ UNUSED(Instance);
+ __IO uint32_t count = 10U;
+
+ /* WA: few cycles for RX PMA descriptor to update */
+ while (count > 0U)
+ {
+ count--;
+ }
+
+ return (uint16_t)USB_DRD_GET_CHEP_RX_CNT((Instance), (bEpNum));
+}
/**
* @brief Sets addresses in a double buffer endpoint.
@@ -554,13 +576,44 @@
#define PCD_SET_EP_DBUF_CNT USB_DRD_SET_CHEP_DBUF_CNT
/**
- * @brief Gets buffer 0/1 rx/tx counter for double buffering.
- * @param USBx USB peripheral instance register address.
- * @param bEpNum Endpoint Number.
- * @retval None
+ * @brief gets counter of the rx buffer0.
+ * @param Instance USB peripheral instance register address.
+ * @param bEpNum channel Number.
+ * @retval Counter value
*/
-#define PCD_GET_EP_DBUF0_CNT USB_DRD_GET_CHEP_DBUF0_CNT
-#define PCD_GET_EP_DBUF1_CNT USB_DRD_GET_CHEP_DBUF1_CNT
+__STATIC_INLINE uint16_t PCD_GET_EP_DBUF0_CNT(PCD_TypeDef *Instance, uint16_t bEpNum)
+{
+ UNUSED(Instance);
+ __IO uint32_t count = 10U;
+
+ /* WA: few cycles for RX PMA descriptor to update */
+ while (count > 0U)
+ {
+ count--;
+ }
+
+ return (uint16_t)USB_DRD_GET_CHEP_DBUF0_CNT((Instance), (bEpNum));
+}
+
+/**
+ * @brief gets counter of the rx buffer1.
+ * @param Instance USB peripheral instance register address.
+ * @param bEpNum channel Number.
+ * @retval Counter value
+ */
+__STATIC_INLINE uint16_t PCD_GET_EP_DBUF1_CNT(PCD_TypeDef *Instance, uint16_t bEpNum)
+{
+ UNUSED(Instance);
+ __IO uint32_t count = 10U;
+
+ /* WA: few cycles for RX PMA descriptor to update */
+ while (count > 0U)
+ {
+ count--;
+ }
+
+ return (uint16_t)USB_DRD_GET_CHEP_DBUF1_CNT((Instance), (bEpNum));
+}
/**
* @}
diff --git a/Inc/stm32g0xx_hal_pcd_ex.h b/Inc/stm32g0xx_hal_pcd_ex.h
index ef46546..952abbc 100644
--- a/Inc/stm32g0xx_hal_pcd_ex.h
+++ b/Inc/stm32g0xx_hal_pcd_ex.h
@@ -6,7 +6,7 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2020 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
diff --git a/Inc/stm32g0xx_hal_pwr.h b/Inc/stm32g0xx_hal_pwr.h
index f9fd184..66ffb3e 100644
--- a/Inc/stm32g0xx_hal_pwr.h
+++ b/Inc/stm32g0xx_hal_pwr.h
@@ -6,11 +6,11 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2018 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
+ * the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
@@ -22,7 +22,7 @@
#define STM32G0xx_HAL_PWR_H
#ifdef __cplusplus
- extern "C" {
+extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
@@ -58,31 +58,31 @@
#define PWR_WAKEUP_PIN2 PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */
#if defined(PWR_CR3_EWUP3)
#define PWR_WAKEUP_PIN3 PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */
-#endif
+#endif /* PWR_CR3_EWUP3 */
#define PWR_WAKEUP_PIN4 PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */
#if defined(PWR_CR3_EWUP5)
#define PWR_WAKEUP_PIN5 PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level detection) */
-#endif
+#endif /* PWR_CR3_EWUP5 */
#define PWR_WAKEUP_PIN6 PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */
#define PWR_WAKEUP_PIN1_HIGH PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level detection) */
#define PWR_WAKEUP_PIN2_HIGH PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level detection) */
#if defined(PWR_CR3_EWUP3)
#define PWR_WAKEUP_PIN3_HIGH PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level detection) */
-#endif
+#endif /* PWR_CR3_EWUP3 */
#define PWR_WAKEUP_PIN4_HIGH PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level detection) */
#if defined(PWR_CR3_EWUP5)
#define PWR_WAKEUP_PIN5_HIGH PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level detection) */
-#endif
+#endif /* PWR_CR3_EWUP5*/
#define PWR_WAKEUP_PIN6_HIGH PWR_CR3_EWUP6 /*!< Wakeup pin 6 (with high level detection) */
#define PWR_WAKEUP_PIN1_LOW ((PWR_CR4_WP1 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP1) /*!< Wakeup pin 1 (with low level detection) */
#define PWR_WAKEUP_PIN2_LOW ((PWR_CR4_WP2 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP2) /*!< Wakeup pin 2 (with low level detection) */
#if defined(PWR_CR3_EWUP3)
#define PWR_WAKEUP_PIN3_LOW ((PWR_CR4_WP3 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP3) /*!< Wakeup pin 3 (with low level detection) */
-#endif
+#endif /* PWR_CR3_EWUP3 */
#define PWR_WAKEUP_PIN4_LOW ((PWR_CR4_WP4 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP4) /*!< Wakeup pin 4 (with low level detection) */
#if defined(PWR_CR3_EWUP5)
#define PWR_WAKEUP_PIN5_LOW ((PWR_CR4_WP5 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP5) /*!< Wakeup pin 5 (with low level detection) */
-#endif
+#endif /* PWR_CR3_EWUP5 */
#define PWR_WAKEUP_PIN6_LOW ((PWR_CR4_WP6 << PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP6) /*!< Wakeup pin 6 (with low level detection) */
/**
* @}
@@ -96,7 +96,7 @@
#define PWR_LOWPOWERMODE_STANDBY (PWR_CR1_LPMS_0 | PWR_CR1_LPMS_1) /*!< Standby mode */
#if defined(PWR_SHDW_SUPPORT)
#define PWR_LOWPOWERMODE_SHUTDOWN (PWR_CR1_LPMS_2) /*!< Shutdown mode */
-#endif
+#endif /* PWR_SHDW_SUPPORT */
/**
* @}
*/
@@ -142,11 +142,11 @@
#define PWR_FLAG_WUF2 (0x00010000u | PWR_SR1_WUF2) /*!< Wakeup event on wakeup pin 2 */
#if defined(PWR_CR3_EWUP3)
#define PWR_FLAG_WUF3 (0x00010000u | PWR_SR1_WUF3) /*!< Wakeup event on wakeup pin 3 */
-#endif
+#endif /* PWR_CR3_EWUP3 */
#define PWR_FLAG_WUF4 (0x00010000u | PWR_SR1_WUF4) /*!< Wakeup event on wakeup pin 4 */
#if defined(PWR_CR3_EWUP5)
#define PWR_FLAG_WUF5 (0x00010000u | PWR_SR1_WUF5) /*!< Wakeup event on wakeup pin 5 */
-#endif
+#endif /* PWR_CR3_EWUP5 */
#define PWR_FLAG_WUF6 (0x00010000u | PWR_SR1_WUF6) /*!< Wakeup event on wakeup pin 6 */
#define PWR_FLAG_WUF (0x00010000u | PWR_SR1_WUF) /*!< Wakeup event on all wakeup pin */
#define PWR_FLAG_SB (0x00010000u | PWR_SR1_SBF) /*!< Standby flag */
@@ -156,15 +156,15 @@
#define PWR_FLAG_REGLPF (0x00020000u | PWR_SR2_REGLPF) /*!< Regulator Low Power flag */
#if defined(PWR_PVD_SUPPORT)
#define PWR_FLAG_PVDO (0x00020000u | PWR_SR2_PVDO) /*!< Power Voltage Detector output */
-#endif
+#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_PVM_SUPPORT)
#define PWR_FLAG_PVMO_USB (0x00020000u | PWR_SR2_PVMO_USB) /*!< Power Voltage Monitoring output */
-#endif
+#endif /* PWR_PVM_SUPPORT */
/**
* @}
*/
-
+
/**
* @}
*/
@@ -206,8 +206,8 @@
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_PWR_GET_FLAG(__FLAG__) (((__FLAG__) & 0x00010000u) ?\
- ((PWR->SR1 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u)) :\
- ((PWR->SR2 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u)))
+ ((PWR->SR1 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u)) :\
+ ((PWR->SR2 & ((__FLAG__) & ~0x00030000u)) == ((__FLAG__) & ~0x00030000u)))
/** @brief Clear a specific PWR flag.
* @param __FLAG__ specifies the flag to clear.
diff --git a/Inc/stm32g0xx_hal_pwr_ex.h b/Inc/stm32g0xx_hal_pwr_ex.h
index 68b8b2e..d0f1225 100644
--- a/Inc/stm32g0xx_hal_pwr_ex.h
+++ b/Inc/stm32g0xx_hal_pwr_ex.h
@@ -6,11 +6,11 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2018 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
+ * the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
@@ -22,7 +22,7 @@
#define STM32G0xx_HAL_PWR_EX_H
#ifdef __cplusplus
- extern "C" {
+extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
@@ -54,8 +54,8 @@
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
This parameter can be a value of @ref PWREx_PVM_Mode. */
-}PWR_PVMTypeDef;
-#endif
+} PWR_PVMTypeDef;
+#endif /* PWR_PVM_SUPPORT */
#if defined(PWR_PVD_SUPPORT)
/**
@@ -69,8 +69,8 @@
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
This parameter can be a value of @ref PWR_PVD_Mode. */
-}PWR_PVDTypeDef;
-#endif
+} PWR_PVDTypeDef;
+#endif /* PWR_PVD_SUPPORT */
/**
* @}
@@ -139,7 +139,7 @@
/**
* @}
*/
-#endif
+#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_PVM_SUPPORT)
/** @defgroup PWREx_PVM_Type Peripheral Voltage Monitoring type
@@ -177,7 +177,7 @@
/**
* @}
*/
-#endif
+#endif /* PWR_PVM_SUPPORT */
/** @defgroup PWREx_VBAT_Battery_Charging_Selection PWR battery charging resistor selection
* @{
@@ -221,7 +221,7 @@
#define PWR_GPIO_D (0x00000003u) /*!< GPIO port D */
#if defined (GPIOE)
#define PWR_GPIO_E (0x00000004u) /*!< GPIO port E */
-#endif
+#endif /* GPIOE */
#define PWR_GPIO_F (0x00000005u) /*!< GPIO port F */
/**
* @}
@@ -258,7 +258,7 @@
*/
#if defined(PWR_PVM_SUPPORT)
#define PWR_FLAG_PVMOUSB (0x00020000u | PWR_SR2_PVMO_USB) /*!< USB Peripheral Voltage Monitoring output */
-#endif
+#endif /* PWR_PVM_SUPPORT */
/**
* @}
*/
@@ -369,7 +369,7 @@
* @retval None
*/
#define __HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR1, PWR_EXTI_LINE_PVD)
-#endif
+#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_PVM_SUPPORT)
/**
@@ -469,7 +469,7 @@
* @retval None
*/
#define __HAL_PWR_PVM_EXTI_CLEAR_FALLING_FLAG() WRITE_REG(EXTI->FPR2, PWR_EXTI_LINE_PVM)
-#endif
+#endif /* PWR_PVM_SUPPORT */
/**
* @}
*/
@@ -516,7 +516,7 @@
((__GPIO__) == PWR_GPIO_C) || \
((__GPIO__) == PWR_GPIO_D) || \
((__GPIO__) == PWR_GPIO_F))
-#endif
+#endif /* GPIOE */
#define IS_PWR_FLASH_POWERDOWN(__MODE__) ((((__MODE__) & (PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) != 0x00u) && \
(((__MODE__) & ~(PWR_FLASHPD_LPRUN | PWR_FLASHPD_LPSLEEP | PWR_FLASHPD_STOP)) == 0x00u))
@@ -534,7 +534,7 @@
((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || \
((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING))
-#endif
+#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_PVM_SUPPORT)
#define IS_PWR_PVM_TYPE(TYPE) ((TYPE) == PWR_PVM_USB)
@@ -546,7 +546,7 @@
((MODE) == PWR_PVM_MODE_EVENT_RISING) ||\
((MODE) == PWR_PVM_MODE_EVENT_FALLING) ||\
((MODE) == PWR_PVM_MODE_EVENT_RISING_FALLING))
-#endif
+#endif /* PWR_PVM_SUPPORT */
/**
* @}
*/
@@ -566,7 +566,7 @@
#if defined(PWR_CR3_ENB_ULP)
void HAL_PWREx_EnablePORMonitorSampling(void);
void HAL_PWREx_DisablePORMonitorSampling(void);
-#endif
+#endif /* PWR_CR3_ENB_ULP */
void HAL_PWREx_EnableInternalWakeUpLine(void);
void HAL_PWREx_DisableInternalWakeUpLine(void);
HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber);
@@ -578,7 +578,7 @@
#if defined(PWR_CR3_RRS)
void HAL_PWREx_EnableSRAMRetention(void);
void HAL_PWREx_DisableSRAMRetention(void);
-#endif
+#endif /* PWR_CR3_RRS */
void HAL_PWREx_EnableFlashPowerDown(uint32_t PowerMode);
void HAL_PWREx_DisableFlashPowerDown(uint32_t PowerMode);
uint32_t HAL_PWREx_GetVoltageRange(void);
@@ -588,7 +588,7 @@
HAL_StatusTypeDef HAL_PWREx_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
void HAL_PWREx_EnablePVD(void);
void HAL_PWREx_DisablePVD(void);
-#endif
+#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_PVM_SUPPORT)
/* Power voltage monitoring configuration functions ***************************/
void HAL_PWREx_EnableVddIO2(void);
@@ -598,14 +598,14 @@
void HAL_PWREx_EnablePVMUSB(void);
void HAL_PWREx_DisablePVMUSB(void);
HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM);
-#endif
+#endif /* PWR_PVM_SUPPORT */
/* Low Power modes configuration functions ************************************/
void HAL_PWREx_EnableLowPowerRunMode(void);
HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void);
#if defined(PWR_SHDW_SUPPORT)
void HAL_PWREx_EnterSHUTDOWNMode(void);
-#endif
+#endif /* PWR_SHDW_SUPPORT */
#if defined(PWR_PVD_SUPPORT) && defined(PWR_PVM_SUPPORT)
void HAL_PWREx_PVD_PVM_IRQHandler(void);
@@ -615,7 +615,7 @@
void HAL_PWREx_PVD_IRQHandler(void);
void HAL_PWREx_PVD_Rising_Callback(void);
void HAL_PWREx_PVD_Falling_Callback(void);
-#endif
+#endif /* PWR_PVD_SUPPORT && PWR_PVM_SUPPORT */
/**
* @}
diff --git a/Inc/stm32g0xx_hal_rcc.h b/Inc/stm32g0xx_hal_rcc.h
index 0836275..aa6856a 100644
--- a/Inc/stm32g0xx_hal_rcc.h
+++ b/Inc/stm32g0xx_hal_rcc.h
@@ -107,7 +107,10 @@
((__SOURCE__) == RCC_PLLSOURCE_HSI) || \
((__SOURCE__) == RCC_PLLSOURCE_HSE))
-#define IS_RCC_PLLM_VALUE(__VALUE__) ((__VALUE__) <= RCC_PLLM_DIV8)
+#define IS_RCC_PLLM_VALUE(__VALUE__) (((__VALUE__) == RCC_PLLM_DIV1) || ((__VALUE__) == RCC_PLLM_DIV2) || \
+ ((__VALUE__) == RCC_PLLM_DIV3) || ((__VALUE__) == RCC_PLLM_DIV4) || \
+ ((__VALUE__) == RCC_PLLM_DIV5) || ((__VALUE__) == RCC_PLLM_DIV6) || \
+ ((__VALUE__) == RCC_PLLM_DIV7) || ((__VALUE__) == RCC_PLLM_DIV8))
#define IS_RCC_PLLN_VALUE(__VALUE__) ((8U <= (__VALUE__)) && ((__VALUE__) <= 86U))
@@ -119,13 +122,14 @@
#define IS_RCC_PLLR_VALUE(__VALUE__) ((RCC_PLLR_DIV2 <= (__VALUE__)) && ((__VALUE__) <= RCC_PLLR_DIV8))
-#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__) & RCC_CLOCKTYPE_ALL) != 0x00UL) && (((__CLK__) & ~RCC_CLOCKTYPE_ALL) == 0x00UL))
+#define IS_RCC_CLOCKTYPE(__CLK__) ((((__CLK__)\
+ & RCC_CLOCKTYPE_ALL) != 0x00UL) && (((__CLK__) & ~RCC_CLOCKTYPE_ALL) == 0x00UL))
#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \
- ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \
- ((__SOURCE__) == RCC_SYSCLKSOURCE_LSE) || \
- ((__SOURCE__) == RCC_SYSCLKSOURCE_LSI) || \
- ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK))
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK))
#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \
((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \
@@ -148,7 +152,7 @@
#define IS_RCC_MCO(__MCOX__) ((__MCOX__) == RCC_MCO1)
#endif /* RCC_MCO2_SUPPORT */
-#if defined(STM32G0C1xx) || defined(STM32G0B1xx)
+#if defined(STM32G0C1xx) || defined(STM32G0B1xx)
#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK) || \
((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || \
((__SOURCE__) == RCC_MCO1SOURCE_HSI) || \
@@ -696,7 +700,7 @@
#define RCC_MCO2SOURCE_PLLPCLK RCC_CFGR_MCO2SEL_3 /*!< PLLPCLK selection as MCO2 source */
#define RCC_MCO2SOURCE_PLLQCLK (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_0) /*!< PLLQCLK selection as MCO2 source */
#define RCC_MCO2SOURCE_RTCCLK (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_1) /*!< RTCCLK selection as MCO2 source */
-#define RCC_MCO2SOURCE_RTC_WKUP (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_0) /*!< RTC_Wakeup selection as MCO2 source */
+#define RCC_MCO2SOURCE_RTC_WKUP (RCC_CFGR_MCO2SEL_3|RCC_CFGR_MCO2SEL_1|RCC_CFGR_MCO2SEL_0) /*!< RTC_Wakeup selection as MCO2 source */
/**
* @}
*/
@@ -751,6 +755,11 @@
#define RCC_FLAG_HSERDY ((CR_REG_INDEX << 5U) | RCC_CR_HSERDY_Pos) /*!< HSE Ready flag */
#define RCC_FLAG_PLLRDY ((CR_REG_INDEX << 5U) | RCC_CR_PLLRDY_Pos) /*!< PLL Ready flag */
+#if defined(RCC_HSI48_SUPPORT)
+/* Flags in the CR register */
+#define RCC_FLAG_HSI48RDY ((CR_REG_INDEX << 5U) | RCC_CR_HSI48RDY_Pos) /*!< HSI48 Ready flag */
+#endif /* RCC_HSI48_SUPPORT */
+
/* Flags in the BDCR register */
#define RCC_FLAG_LSERDY ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSERDY_Pos) /*!< LSE Ready flag */
#define RCC_FLAG_LSECSSD ((BDCR_REG_INDEX << 5U) | RCC_BDCR_LSECSSD_Pos) /*!< LSE Clock Security System Interrupt flag */
@@ -765,11 +774,6 @@
#define RCC_FLAG_WWDGRST ((CSR_REG_INDEX << 5U) | RCC_CSR_WWDGRSTF_Pos) /*!< Window watchdog reset flag */
#define RCC_FLAG_LPWRRST ((CSR_REG_INDEX << 5U) | RCC_CSR_LPWRRSTF_Pos) /*!< Low-Power reset flag */
-#if defined(RCC_HSI48_SUPPORT)
-/* Flags in the CRRCR register */
-#define RCC_FLAG_HSI48RDY ((CRRCR_REG_INDEX << 5U) | RCC_CRRCR_RC48RDY_Pos) /*!< HSI48 Ready flag */
-#endif /* RCC_HSI48_SUPPORT */
-
/**
* @}
*/
@@ -785,6 +789,23 @@
* @}
*/
+/** @defgroup RCC_Reset_Flag Reset Flag
+ * @{
+ */
+#define RCC_RESET_FLAG_OBL RCC_CSR_OBLRSTF /*!< Option Byte Loader reset flag */
+#define RCC_RESET_FLAG_PIN RCC_CSR_PINRSTF /*!< PIN reset flag */
+#define RCC_RESET_FLAG_PWR RCC_CSR_PWRRSTF /*!< BOR or POR/PDR reset flag */
+#define RCC_RESET_FLAG_SW RCC_CSR_SFTRSTF /*!< Software Reset flag */
+#define RCC_RESET_FLAG_IWDG RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */
+#define RCC_RESET_FLAG_WWDG RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */
+#define RCC_RESET_FLAG_LPWR RCC_CSR_LPWRRSTF /*!< Low power reset flag */
+#define RCC_RESET_FLAG_ALL (RCC_RESET_FLAG_OBL | RCC_RESET_FLAG_PIN | RCC_RESET_FLAG_PWR | \
+ RCC_RESET_FLAG_SW | RCC_RESET_FLAG_IWDG | RCC_RESET_FLAG_WWDG | \
+ RCC_RESET_FLAG_LPWR)
+/**
+ * @}
+ */
+
/**
* @}
*/
@@ -804,59 +825,59 @@
*/
#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#if defined(DMA2)
#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* DMA2 */
#define __HAL_RCC_FLASH_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLASHEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_CRC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#if defined(RNG)
#define __HAL_RCC_RNG_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_RNGEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* RNG */
#if defined(AES)
#define __HAL_RCC_AES_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->AHBENR, RCC_AHBENR_AESEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHBENR, RCC_AHBENR_AESEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_AESEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* AES */
#define __HAL_RCC_DMA1_CLK_DISABLE() CLEAR_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN)
@@ -884,54 +905,54 @@
*/
#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOCEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIODEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#if defined(GPIOE)
#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOEEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* GPIOE */
#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->IOPENR, RCC_IOPENR_GPIOFEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_GPIOA_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOAEN)
#define __HAL_RCC_GPIOB_CLK_DISABLE() CLEAR_BIT(RCC->IOPENR, RCC_IOPENR_GPIOBEN)
@@ -955,275 +976,275 @@
*/
#if defined(TIM2)
#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* TIM2 */
#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM3EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#if defined(TIM4)
#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM4EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* TIM4 */
#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM6EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_TIM7EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#if defined(CRS)
#define __HAL_RCC_CRS_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); \
- UNUSED(tmpreg); \
- } while(0)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_CRSEN); \
+ UNUSED(tmpreg); \
+ } while(0)
#endif /* CRS */
#define __HAL_RCC_RTCAPB_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_RTCAPBEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_WWDGEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI2EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#if defined(SPI3)
#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_SPI3EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* SPI3 */
#define __HAL_RCC_USART2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART2EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_USART3_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART3EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_USART4_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART4EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#if defined(USART5)
#define __HAL_RCC_USART5_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART5EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* USART5 */
#if defined(USART6)
#define __HAL_RCC_USART6_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USART6EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* USART6 */
#if defined(LPUART1)
#define __HAL_RCC_LPUART1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART1EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* LPUART1 */
#if defined(LPUART2)
#define __HAL_RCC_LPUART2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPUART2EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* LPUART2 */
#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C1EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C2EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#if defined(I2C3)
#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_I2C3EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* I2C3 */
#if defined(CEC)
#define __HAL_RCC_CEC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_CECEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_CECEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_CECEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_CECEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* CEC */
#if defined(UCPD1)
#define __HAL_RCC_UCPD1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD1EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* UCPD1 */
#if defined(UCPD2)
#define __HAL_RCC_UCPD2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_UCPD2EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* UCPD2 */
#if defined(STM32G0B0xx) || defined(STM32G0B1xx) || defined (STM32G0C1xx)
#define __HAL_RCC_USB_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_USBEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USBEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_USBEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_USBEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */
#if defined(FDCAN1) || defined(FDCAN2)
#define __HAL_RCC_FDCAN_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN); \
- UNUSED(tmpreg); \
- } while(0)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_FDCANEN); \
+ UNUSED(tmpreg); \
+ } while(0)
#endif /* FDCAN1 || FDCAN2 */
#define __HAL_RCC_DBGMCU_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_DBGEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_PWR_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_PWREN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#if defined(DAC1)
#define __HAL_RCC_DAC1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_DAC1EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* DAC1 */
#if defined(LPTIM2)
#define __HAL_RCC_LPTIM2_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM2EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* LPTIM2 */
#if defined(LPTIM1)
#define __HAL_RCC_LPTIM1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR1, RCC_APBENR1_LPTIM1EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* LPTIM1 */
/**
@@ -1239,78 +1260,78 @@
*/
#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SYSCFGEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM1EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_SPI1EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_USART1_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_USART1EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM14EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#if defined(TIM15)
#define __HAL_RCC_TIM15_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM15EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#endif /* TIM15 */
#define __HAL_RCC_TIM16_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM16EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_TIM17_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_TIM17EN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#define __HAL_RCC_ADC_CLK_ENABLE() do { \
- __IO uint32_t tmpreg; \
- SET_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \
- /* Delay after an RCC peripheral clock enabling */ \
- tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \
- UNUSED(tmpreg); \
- } while(0U)
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APBENR2, RCC_APBENR2_ADCEN); \
+ UNUSED(tmpreg); \
+ } while(0U)
#if defined(TIM2)
#define __HAL_RCC_TIM2_CLK_DISABLE() CLEAR_BIT(RCC->APBENR1, RCC_APBENR1_TIM2EN)
@@ -2585,7 +2606,7 @@
CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
} \
} while(0U)
-
+
#if defined(RCC_HSI48_SUPPORT)
/** @brief Macros to enable or disable the Internal High Speed 48MHz oscillator (HSI48).
* @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes.
@@ -2734,18 +2755,18 @@
MODIFY_REG(RCC->PLLCFGR, \
(RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \
RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLQ | RCC_PLLCFGR_PLLR), \
- ((uint32_t) (__PLLSOURCE__) | \
- (uint32_t) (__PLLM__) | \
- (uint32_t) ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \
- (uint32_t) (__PLLP__) | \
- (uint32_t) (__PLLQ__) | \
- (uint32_t) (__PLLR__)))
+ ((uint32_t) (__PLLSOURCE__) | \
+ (uint32_t) (__PLLM__) | \
+ (uint32_t) ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \
+ (uint32_t) (__PLLP__) | \
+ (uint32_t) (__PLLQ__) | \
+ (uint32_t) (__PLLR__)))
#else
#define __HAL_RCC_PLL_CONFIG(__PLLSOURCE__, __PLLM__, __PLLN__, __PLLP__, __PLLR__ ) \
MODIFY_REG(RCC->PLLCFGR, \
(RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | \
RCC_PLLCFGR_PLLP | RCC_PLLCFGR_PLLR), \
- ((uint32_t) (__PLLSOURCE__) | \
+ ((uint32_t) (__PLLSOURCE__) | \
(uint32_t) (__PLLM__) | \
(uint32_t) ((__PLLN__) << RCC_PLLCFGR_PLLN_Pos) | \
(uint32_t) (__PLLP__) | \
@@ -2866,7 +2887,7 @@
* @arg @ref RCC_MCO1SOURCE_PLLPCLK PLLP output clock selected as MCO source
* @arg @ref RCC_MCO1SOURCE_PLLQCLK PLLQ output clock selected as MCO source
* @arg @ref RCC_MCO1SOURCE_RTCCLK RTC clock selected as MCO source
- * @arg @ref RCC_MCO1SOURCE_RTC_WKUP RTC_WKUP clock selected as MCO source
+ * @arg @ref RCC_MCO1SOURCE_RTC_WKUP RTC_WKUP clock selected as MCO source
@if STM32G0C1xx
* @arg @ref RCC_MCO1SOURCE_HSI48 HSI48 clock selected as MCO source for devices with HSI48
@endif
@@ -2878,8 +2899,13 @@
* @arg @ref RCC_MCODIV_8 MCO clock source is divided by 8
* @arg @ref RCC_MCODIV_16 MCO clock source is divided by 16
* @arg @ref RCC_MCODIV_32 MCO clock source is divided by 32
- * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 128
- * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 256
+ * @arg @ref RCC_MCODIV_64 MCO clock source is divided by 64
+ * @arg @ref RCC_MCODIV_128 MCO clock source is divided by 128
+ @if STM32G0C1xx
+ * @arg @ref RCC_MCODIV_256 MCO clock source is divided by 256
+ * @arg @ref RCC_MCODIV_512 MCO clock source is divided by 512
+ * @arg @ref RCC_MCODIV_1024 MCO clock source is divided by 1024
+ @endif
*/
#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
@@ -3024,15 +3050,15 @@
#if defined(RCC_HSI48_SUPPORT)
#define __HAL_RCC_GET_FLAG(__FLAG__) \
(((((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \
- ((((__FLAG__) >> 5U) == CRRCR_REG_INDEX) ? RCC->CRRCR : \
- ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \
- ((((__FLAG__) >> 5U) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR)))) & \
+ ((((__FLAG__) >> 5U) == CRRCR_REG_INDEX) ? RCC->CRRCR : \
+ ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \
+ ((((__FLAG__) >> 5U) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR)))) & \
(1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) ? 1U : 0U)
#else
#define __HAL_RCC_GET_FLAG(__FLAG__) \
(((((((__FLAG__) >> 5U) == CR_REG_INDEX) ? RCC->CR : \
- ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \
- ((((__FLAG__) >> 5U) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR))) & \
+ ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \
+ ((((__FLAG__) >> 5U) == CSR_REG_INDEX) ? RCC->CSR : RCC->CIFR))) & \
(1U << ((__FLAG__) & RCC_FLAG_MASK))) != RESET) ? 1U : 0U)
#endif /* RCC_HSI48_SUPPORT */
@@ -3080,6 +3106,7 @@
uint32_t HAL_RCC_GetPCLK1Freq(void);
void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+uint32_t HAL_RCC_GetResetSource(void);
/* LSE & HSE CSS NMI IRQ handler */
void HAL_RCC_NMI_IRQHandler(void);
/* User Callbacks in non blocking mode (IT mode) */
diff --git a/Inc/stm32g0xx_hal_rcc_ex.h b/Inc/stm32g0xx_hal_rcc_ex.h
index a7ace39..e3ff99a 100644
--- a/Inc/stm32g0xx_hal_rcc_ex.h
+++ b/Inc/stm32g0xx_hal_rcc_ex.h
@@ -611,8 +611,8 @@
/* Exported macros -----------------------------------------------------------*/
/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
- * @{
- */
+ * @{
+ */
/** @brief Macro to configure the I2C1 clock (I2C1CLK).
@@ -623,7 +623,7 @@
* @arg @ref RCC_I2C1CLKSOURCE_SYSCLK System Clock selected as I2C1 clock
*/
#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__))
/** @brief Macro to get the I2C1 clock source.
* @retval The clock source can be one of the following values:
@@ -641,7 +641,7 @@
* @arg @ref RCC_I2C2CLKSOURCE_SYSCLK System Clock selected as I2C2 clock
*/
#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C2SEL, (uint32_t)(__I2C2_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2C2SEL, (uint32_t)(__I2C2_CLKSOURCE__))
/** @brief Macro to get the I2C2 clock source.
* @retval The clock source can be one of the following values:
@@ -662,10 +662,10 @@
*/
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
#define __HAL_RCC_I2S1_CONFIG(__I2S1_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__))
#else
#define __HAL_RCC_I2S1_CONFIG(__I2S1_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_I2S1SEL, (uint32_t)(__I2S1_CLKSOURCE__))
#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/** @brief Macro to get the I2S1 clock source.
* @retval The clock source can be one of the following values:
@@ -691,7 +691,7 @@
* @arg @ref RCC_I2S2CLKSOURCE_EXT External clock selected as I2S2 clock
*/
#define __HAL_RCC_I2S2_CONFIG(__I2S2_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2S2SEL, (uint32_t)(__I2S2_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_I2S2SEL, (uint32_t)(__I2S2_CLKSOURCE__))
/** @brief Macro to get the I2S2 clock source.
* @retval The clock source can be one of the following values:
@@ -713,7 +713,7 @@
* @arg @ref RCC_USART1CLKSOURCE_LSE LSE selected as USART1 clock
*/
#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__))
/** @brief Macro to get the USART1 clock source.
* @retval The clock source can be one of the following values:
@@ -735,7 +735,7 @@
* @arg @ref RCC_USART2CLKSOURCE_LSE LSE selected as USART2 clock
*/
#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__))
/** @brief Macro to get the USART2 clock source.
* @retval The clock source can be one of the following values:
@@ -758,7 +758,7 @@
* @arg @ref RCC_USART3CLKSOURCE_LSE LSE selected as USART3 clock
*/
#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART3SEL, (uint32_t)(__USART3_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_USART3SEL, (uint32_t)(__USART3_CLKSOURCE__))
/** @brief Macro to get the USART3 clock source.
* @retval The clock source can be one of the following values:
@@ -781,7 +781,7 @@
* @arg @ref RCC_LPUART1CLKSOURCE_LSE LSE selected as LPUART1 clock
*/
#define __HAL_RCC_LPUART1_CONFIG(__LPUART1_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, (uint32_t)(__LPUART1_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, (uint32_t)(__LPUART1_CLKSOURCE__))
/** @brief Macro to get the LPUART1 clock source.
* @retval The clock source can be one of the following values:
@@ -804,7 +804,7 @@
* @arg @ref RCC_LPUART2CLKSOURCE_LSE LSE selected as LPUART2 clock
*/
#define __HAL_RCC_LPUART2_CONFIG(__LPUART2_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART2SEL, (uint32_t)(__LPUART2_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART2SEL, (uint32_t)(__LPUART2_CLKSOURCE__))
/** @brief Macro to get the LPUART2 clock source.
* @retval The clock source can be one of the following values:
@@ -827,7 +827,7 @@
* @arg @ref RCC_LPTIM1CLKSOURCE_LSE LSE selected as LPTIM1 clock
*/
#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__))
/** @brief Macro to get the LPTIM1 clock source.
* @retval The clock source can be one of the following values:
@@ -850,7 +850,7 @@
* @arg @ref RCC_LPTIM2CLKSOURCE_LSE LSE selected as LPTIM2 clock
*/
#define __HAL_RCC_LPTIM2_CONFIG(__LPTIM2_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPTIM2SEL, (uint32_t)(__LPTIM2_CLKSOURCE__))
/** @brief Macro to get the LPTIM2 clock source.
* @retval The clock source can be one of the following values:
@@ -871,7 +871,7 @@
* @arg @ref RCC_CECCLKSOURCE_LSE LSE selected as CEC clock
*/
#define __HAL_RCC_CEC_CONFIG(__CEC_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CECSEL, (uint32_t)(__CEC_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CECSEL, (uint32_t)(__CEC_CLKSOURCE__))
/** @brief Macro to get the CEC clock source.
* @retval The clock source can be one of the following values:
@@ -893,7 +893,7 @@
* @arg @ref RCC_RNGCLKSOURCE_PLL PLLQ Output Clock selected as RNG clock
*/
#define __HAL_RCC_RNG_CONFIG(__RNG_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGSEL, (uint32_t)(__RNG_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGSEL, (uint32_t)(__RNG_CLKSOURCE__))
/** @brief Macro to get the RNG clock.
* @retval The clock source can be one of the following values:
@@ -915,7 +915,7 @@
* @arg @ref RCC_RNGCLK_DIV8 RNG Clock divided by 8
*/
#define __HAL_RCC_RNGDIV_CONFIG(__RNG_CLKDIV__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGDIV, (uint32_t)(__RNG_CLKDIV__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_RNGDIV, (uint32_t)(__RNG_CLKDIV__))
/** @brief Macro to get the RNG clock division factor.
* @retval The division factor can be one of the following values:
@@ -935,7 +935,7 @@
* @arg @ref RCC_ADCCLKSOURCE_HSI HSI Clock selected as ADC clock
*/
#define __HAL_RCC_ADC_CONFIG(__ADC_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, (uint32_t)(__ADC_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, (uint32_t)(__ADC_CLKSOURCE__))
/** @brief Macro to get the ADC clock source.
* @retval The clock source can be one of the following values:
@@ -953,7 +953,7 @@
* @arg @ref RCC_TIM1CLKSOURCE_PCLK1 System Clock selected as TIM1 clock
*/
#define __HAL_RCC_TIM1_CONFIG(__TIM1_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM1SEL, (uint32_t)(__TIM1_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM1SEL, (uint32_t)(__TIM1_CLKSOURCE__))
/** @brief Macro to get the TIM1 clock source.
* @retval The clock source can be one of the following values:
@@ -971,7 +971,7 @@
* @arg RCC_TIM15CLKSOURCE_PCLK1 System Clock selected as TIM15 clock
*/
#define __HAL_RCC_TIM15_CONFIG(__TIM15_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM15SEL, (uint32_t)(__TIM15_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_TIM15SEL, (uint32_t)(__TIM15_CLKSOURCE__))
/** @brief Macro to get the TIM15 clock source.
* @retval The clock source can be one of the following values:
@@ -991,7 +991,7 @@
* (*) Feature not available on all devices
*/
#define __HAL_RCC_USB_CONFIG(__USB_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_USBSEL, (uint32_t)(__USB_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_USBSEL, (uint32_t)(__USB_CLKSOURCE__))
/** @brief Macro to get the USB clock source.
* @retval The clock source can be one of the following values:
@@ -1011,7 +1011,7 @@
* @arg RCC_FDCANCLKSOURCE_HSE HSE Clock selected as FDCAN clock
*/
#define __HAL_RCC_FDCAN_CONFIG(__FDCAN_CLKSOURCE__) \
- MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL, (uint32_t)(__FDCAN_CLKSOURCE__))
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_FDCANSEL, (uint32_t)(__FDCAN_CLKSOURCE__))
/** @brief Macro to get the FDCAN clock source.
* @retval The clock source can be one of the following values:
@@ -1074,15 +1074,15 @@
#define RCC_CRS_IT_ERROR_MASK (RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS)
#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) do { \
- if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \
- { \
- WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \
- } \
- else \
- { \
- WRITE_REG(CRS->ICR, (__INTERRUPT__)); \
- } \
- } while(0)
+ if(((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK) != 0U) \
+ { \
+ WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__INTERRUPT__) & ~RCC_CRS_IT_ERROR_MASK)); \
+ } \
+ else \
+ { \
+ WRITE_REG(CRS->ICR, (__INTERRUPT__)); \
+ } \
+ } while(0)
/**
* @brief Check whether the specified CRS flag is set or not.
@@ -1118,15 +1118,15 @@
#define RCC_CRS_FLAG_ERROR_MASK (RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS)
#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) do { \
- if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \
- { \
- WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \
- } \
- else \
- { \
- WRITE_REG(CRS->ICR, (__FLAG__)); \
- } \
- } while(0)
+ if(((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK) != 0U) \
+ { \
+ WRITE_REG(CRS->ICR, CRS_ICR_ERRC | ((__FLAG__) & ~RCC_CRS_FLAG_ERROR_MASK)); \
+ } \
+ else \
+ { \
+ WRITE_REG(CRS->ICR, (__FLAG__)); \
+ } \
+ } while(0)
#endif /* CRS */
@@ -1248,303 +1248,303 @@
#if defined(STM32G0C1xx)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
- (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
#elif defined(STM32G0B1xx)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART2) == RCC_PERIPHCLK_LPUART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_FDCAN) == RCC_PERIPHCLK_FDCAN) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
#elif defined(STM32G0B0xx)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB))
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB))
#elif defined(STM32G081xx)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
- (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
#elif defined(STM32G071xx)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
#elif defined(STM32G070xx)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
#elif defined(STM32G061xx)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
#elif defined(STM32G051xx)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM15) == RCC_PERIPHCLK_TIM15))
#elif defined(STM32G041xx)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1))
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RNG) == RCC_PERIPHCLK_RNG) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1))
#elif defined(STM32G031xx)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1))
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_LPTIM2) == RCC_PERIPHCLK_LPTIM2) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_TIM1) == RCC_PERIPHCLK_TIM1))
-#elif defined(STM32G030xx) || defined(STM32G050xx)
+#elif defined(STM32G030xx) || defined(STM32G050xx)
#define IS_RCC_PERIPHCLOCK(__SELECTION__) \
- ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
- (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
- (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
+ ((((__SELECTION__) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_I2S1) == RCC_PERIPHCLK_I2S1) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \
+ (((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC))
#endif /* STM32G0C1xx */
#define IS_RCC_USART1CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \
- ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \
- ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \
- ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI))
+ (((__SOURCE__) == RCC_USART1CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART1CLKSOURCE_HSI))
#if defined(RCC_CCIPR_USART2SEL)
#define IS_RCC_USART2CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \
- ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \
- ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \
- ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI))
+ (((__SOURCE__) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART2CLKSOURCE_HSI))
#endif /* RCC_CCIPR_USART2SEL */
#if defined(RCC_CCIPR_USART3SEL)
#define IS_RCC_USART3CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_USART3CLKSOURCE_PCLK1) || \
- ((__SOURCE__) == RCC_USART3CLKSOURCE_SYSCLK) || \
- ((__SOURCE__) == RCC_USART3CLKSOURCE_LSE) || \
- ((__SOURCE__) == RCC_USART3CLKSOURCE_HSI))
+ (((__SOURCE__) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_USART3CLKSOURCE_HSI))
#endif /* RCC_CCIPR_USART3SEL */
#if defined(LPUART1)
#define IS_RCC_LPUART1CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \
- ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \
- ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \
- ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI))
+ (((__SOURCE__) == RCC_LPUART1CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_LPUART1CLKSOURCE_HSI))
#endif /* LPUART1 */
#if defined(LPUART2)
#define IS_RCC_LPUART2CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_LPUART2CLKSOURCE_PCLK1) || \
- ((__SOURCE__) == RCC_LPUART2CLKSOURCE_SYSCLK) || \
- ((__SOURCE__) == RCC_LPUART2CLKSOURCE_LSE) || \
- ((__SOURCE__) == RCC_LPUART2CLKSOURCE_HSI))
+ (((__SOURCE__) == RCC_LPUART2CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_LPUART2CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_LPUART2CLKSOURCE_LSE) || \
+ ((__SOURCE__) == RCC_LPUART2CLKSOURCE_HSI))
#endif /* LPUART2 */
#define IS_RCC_I2C1CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \
- ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK) || \
- ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI))
+ (((__SOURCE__) == RCC_I2C1CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_I2C1CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_I2C1CLKSOURCE_HSI))
#if defined(RCC_CCIPR_I2C2SEL)
#define IS_RCC_I2C2CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_I2C2CLKSOURCE_PCLK1) || \
- ((__SOURCE__) == RCC_I2C2CLKSOURCE_SYSCLK) || \
- ((__SOURCE__) == RCC_I2C2CLKSOURCE_HSI))
+ (((__SOURCE__) == RCC_I2C2CLKSOURCE_PCLK1) || \
+ ((__SOURCE__) == RCC_I2C2CLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_I2C2CLKSOURCE_HSI))
#endif /* RCC_CCIPR_I2C2SEL */
#define IS_RCC_I2S1CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_I2S1CLKSOURCE_SYSCLK)|| \
- ((__SOURCE__) == RCC_I2S1CLKSOURCE_PLL) || \
- ((__SOURCE__) == RCC_I2S1CLKSOURCE_HSI) || \
- ((__SOURCE__) == RCC_I2S1CLKSOURCE_EXT))
+ (((__SOURCE__) == RCC_I2S1CLKSOURCE_SYSCLK)|| \
+ ((__SOURCE__) == RCC_I2S1CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_I2S1CLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_I2S1CLKSOURCE_EXT))
#if defined(RCC_CCIPR2_I2S2SEL)
#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK)|| \
- ((__SOURCE__) == RCC_I2S2CLKSOURCE_PLL) || \
- ((__SOURCE__) == RCC_I2S2CLKSOURCE_HSI) || \
- ((__SOURCE__) == RCC_I2S2CLKSOURCE_EXT))
+ (((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK)|| \
+ ((__SOURCE__) == RCC_I2S2CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_I2S2CLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_I2S2CLKSOURCE_EXT))
#endif /* RCC_CCIPR2_I2S2SEL */
#if defined(RCC_CCIPR_LPTIM1SEL)
#define IS_RCC_LPTIM1CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1)|| \
- ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSI) || \
- ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_HSI) || \
- ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSE))
+ (((__SOURCE__) == RCC_LPTIM1CLKSOURCE_PCLK1)|| \
+ ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_LPTIM1CLKSOURCE_LSE))
#endif /* RCC_CCIPR_LPTIM1SEL */
#if defined(RCC_CCIPR_LPTIM2SEL)
#define IS_RCC_LPTIM2CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_LPTIM2CLKSOURCE_PCLK1)|| \
- ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSI) || \
- ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_HSI) || \
- ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE))
+ (((__SOURCE__) == RCC_LPTIM2CLKSOURCE_PCLK1)|| \
+ ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSI) || \
+ ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_HSI) || \
+ ((__SOURCE__) == RCC_LPTIM2CLKSOURCE_LSE))
#endif /* RCC_CCIPR_LPTIM2SEL */
#define IS_RCC_ADCCLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_ADCCLKSOURCE_PLLADC) || \
- ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK) || \
- ((__SOURCE__) == RCC_ADCCLKSOURCE_HSI))
+ (((__SOURCE__) == RCC_ADCCLKSOURCE_PLLADC) || \
+ ((__SOURCE__) == RCC_ADCCLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_ADCCLKSOURCE_HSI))
#if defined(RNG)
#define IS_RCC_RNGCLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_RNGCLKSOURCE_NONE) || \
- ((__SOURCE__) == RCC_RNGCLKSOURCE_HSI_DIV8) || \
- ((__SOURCE__) == RCC_RNGCLKSOURCE_SYSCLK) || \
- ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL))
+ (((__SOURCE__) == RCC_RNGCLKSOURCE_NONE) || \
+ ((__SOURCE__) == RCC_RNGCLKSOURCE_HSI_DIV8) || \
+ ((__SOURCE__) == RCC_RNGCLKSOURCE_SYSCLK) || \
+ ((__SOURCE__) == RCC_RNGCLKSOURCE_PLL))
#define IS_RCC_RNGDIV(__DIV__) \
- (((__DIV__) == RCC_RNGCLK_DIV1) || \
- ((__DIV__) == RCC_RNGCLK_DIV2) || \
- ((__DIV__) == RCC_RNGCLK_DIV4) || \
- ((__DIV__) == RCC_RNGCLK_DIV8))
+ (((__DIV__) == RCC_RNGCLK_DIV1) || \
+ ((__DIV__) == RCC_RNGCLK_DIV2) || \
+ ((__DIV__) == RCC_RNGCLK_DIV4) || \
+ ((__DIV__) == RCC_RNGCLK_DIV8))
#endif /* RNG */
#if defined(CEC)
#define IS_RCC_CECCLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_CECCLKSOURCE_HSI_DIV488)|| \
- ((__SOURCE__) == RCC_CECCLKSOURCE_LSE))
+ (((__SOURCE__) == RCC_CECCLKSOURCE_HSI_DIV488)|| \
+ ((__SOURCE__) == RCC_CECCLKSOURCE_LSE))
#endif /* CEC */
#if defined(FDCAN1) || defined(FDCAN2)
#define IS_RCC_FDCANCLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_FDCANCLKSOURCE_HSE)|| \
- ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL)|| \
- ((__SOURCE__) == RCC_FDCANCLKSOURCE_PCLK1))
+ (((__SOURCE__) == RCC_FDCANCLKSOURCE_HSE)|| \
+ ((__SOURCE__) == RCC_FDCANCLKSOURCE_PLL)|| \
+ ((__SOURCE__) == RCC_FDCANCLKSOURCE_PCLK1))
#endif /* FDCAN1 */
#if defined(RCC_HSI48_SUPPORT)
#define IS_RCC_USBCLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48)|| \
- ((__SOURCE__) == RCC_USBCLKSOURCE_HSE) || \
- ((__SOURCE__) == RCC_USBCLKSOURCE_PLL))
+ (((__SOURCE__) == RCC_USBCLKSOURCE_HSI48)|| \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_HSE) || \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_PLL))
#else
#define IS_RCC_USBCLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_USBCLKSOURCE_HSE)|| \
- ((__SOURCE__) == RCC_USBCLKSOURCE_PLL))
+ (((__SOURCE__) == RCC_USBCLKSOURCE_HSE)|| \
+ ((__SOURCE__) == RCC_USBCLKSOURCE_PLL))
#endif /* RCC_HSI48_SUPPORT */
#if defined(RCC_CCIPR_TIM1SEL)
#define IS_RCC_TIM1CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_TIM1CLKSOURCE_PLL) || \
- ((__SOURCE__) == RCC_TIM1CLKSOURCE_PCLK1))
+ (((__SOURCE__) == RCC_TIM1CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_TIM1CLKSOURCE_PCLK1))
#endif /* RCC_CCIPR_TIM1SEL */
#if defined(RCC_CCIPR_TIM15SEL)
#define IS_RCC_TIM15CLKSOURCE(__SOURCE__) \
- (((__SOURCE__) == RCC_TIM15CLKSOURCE_PLL) || \
- ((__SOURCE__) == RCC_TIM15CLKSOURCE_PCLK1))
+ (((__SOURCE__) == RCC_TIM15CLKSOURCE_PLL) || \
+ ((__SOURCE__) == RCC_TIM15CLKSOURCE_PCLK1))
#endif /* RCC_CCIPR_TIM15SEL */
#if defined(CRS)
diff --git a/Inc/stm32g0xx_hal_rng.h b/Inc/stm32g0xx_hal_rng.h
index d13c107..4d9a6f6 100644
--- a/Inc/stm32g0xx_hal_rng.h
+++ b/Inc/stm32g0xx_hal_rng.h
@@ -22,7 +22,7 @@
#define STM32G0xx_HAL_RNG_H
#ifdef __cplusplus
- extern "C" {
+extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
@@ -81,7 +81,7 @@
typedef struct __RNG_HandleTypeDef
#else
typedef struct
-#endif /* (USE_HAL_RNG_REGISTER_CALLBACKS) */
+#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
{
RNG_TypeDef *Instance; /*!< Register base address */
@@ -91,7 +91,7 @@
__IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */
- __IO uint32_t ErrorCode; /*!< RNG Error code */
+ __IO uint32_t ErrorCode; /*!< RNG Error code */
uint32_t RandomNumber; /*!< Last Generated RNG Data */
@@ -171,14 +171,14 @@
/** @defgroup RNG_Error_Definition RNG Error Definition
* @{
*/
-#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */
+#define HAL_RNG_ERROR_NONE 0x00000000U /*!< No error */
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
#define HAL_RNG_ERROR_INVALID_CALLBACK 0x00000001U /*!< Invalid Callback error */
#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
-#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */
+#define HAL_RNG_ERROR_TIMEOUT 0x00000002U /*!< Timeout error */
#define HAL_RNG_ERROR_BUSY 0x00000004U /*!< Busy error */
#define HAL_RNG_ERROR_SEED 0x00000008U /*!< Seed error */
-#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */
+#define HAL_RNG_ERROR_CLOCK 0x00000010U /*!< Clock error */
/**
* @}
*/
@@ -204,7 +204,7 @@
} while(0U)
#else
#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
-#endif /*USE_HAL_RNG_REGISTER_CALLBACKS */
+#endif /* USE_HAL_RNG_REGISTER_CALLBACKS */
/**
* @brief Enables the RNG peripheral.
@@ -299,7 +299,8 @@
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_RNG_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, pRNG_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID,
+ pRNG_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_RNG_UnRegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID);
HAL_StatusTypeDef HAL_RNG_RegisterReadyDataCallback(RNG_HandleTypeDef *hrng, pRNG_ReadyDataCallbackTypeDef pCallback);
@@ -346,8 +347,8 @@
((IT) == RNG_IT_SEI))
#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
- ((FLAG) == RNG_FLAG_CECS) || \
- ((FLAG) == RNG_FLAG_SECS))
+ ((FLAG) == RNG_FLAG_CECS) || \
+ ((FLAG) == RNG_FLAG_SECS))
/**
* @brief Verify the RNG Clock Error Detection mode.
diff --git a/Inc/stm32g0xx_hal_rtc.h b/Inc/stm32g0xx_hal_rtc.h
index e994a19..818ba79 100644
--- a/Inc/stm32g0xx_hal_rtc.h
+++ b/Inc/stm32g0xx_hal_rtc.h
@@ -112,12 +112,11 @@
with [1 Sec / SecondFraction +1] granularity.
This field will be used only by HAL_RTC_GetTime function */
- uint32_t DayLightSaving; /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment.
- This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+ uint32_t DayLightSaving; /*!< This interface is deprecated. To manage Daylight Saving Time,
+ please use HAL_RTC_DST_xxx functions */
- uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BKP bit
- in CR register to store the operation.
- This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+ uint32_t StoreOperation; /*!< This interface is deprecated. To manage Daylight Saving Time,
+ please use HAL_RTC_DST_xxx functions */
}RTC_TimeTypeDef;
/**
@@ -170,7 +169,7 @@
typedef struct __RTC_HandleTypeDef
#else
typedef struct
-#endif
+#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
{
RTC_TypeDef *Instance; /*!< Register base address */
@@ -197,7 +196,7 @@
#if defined(TAMP_CR1_TAMP3E)
void (* Tamper3EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Tamper 3 Event callback */
-#endif
+#endif /* TAMP_CR1_TAMP3E */
void (* InternalTamper3EventCallback) ( struct __RTC_HandleTypeDef * hrtc); /*!< RTC Internal Tamper 3 Event callback */
@@ -230,7 +229,7 @@
HAL_RTC_TAMPER2_EVENT_CB_ID = 0x05U, /*!< RTC Tamper 2 Callback ID */
#if defined(TAMP_CR1_TAMP3E)
HAL_RTC_TAMPER3_EVENT_CB_ID = 0x06U, /*!< RTC Tamper 3 Callback ID */
-#endif
+#endif /* TAMP_CR1_TAMP3E */
HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID = 0x09U, /*!< RTC Internal Tamper 3 Callback ID */
HAL_RTC_INTERNAL_TAMPER4_EVENT_CB_ID = 0x0AU, /*!< RTC Internal Tamper 4 Callback ID */
HAL_RTC_INTERNAL_TAMPER5_EVENT_CB_ID = 0x0BU, /*!< RTC Internal Tamper 5 Callback ID */
@@ -566,6 +565,8 @@
/**
* @brief Add 1 hour (summer time change).
+ * @note This interface is deprecated.
+ * To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions
* @param __HANDLE__ specifies the RTC handle.
* @param __BKP__ Backup
* This parameter can be:
@@ -583,6 +584,8 @@
/**
* @brief Subtract 1 hour (winter time change).
+ * @note This interface is deprecated.
+ * To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions
* @param __HANDLE__ specifies the RTC handle.
* @param __BKP__ Backup
* This parameter can be:
@@ -759,6 +762,11 @@
HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
diff --git a/Inc/stm32g0xx_hal_rtc_ex.h b/Inc/stm32g0xx_hal_rtc_ex.h
index ba29c78..cb0e750 100644
--- a/Inc/stm32g0xx_hal_rtc_ex.h
+++ b/Inc/stm32g0xx_hal_rtc_ex.h
@@ -187,7 +187,7 @@
#define RTC_TAMPER_ALL (TAMP_CR1_TAMP1E | TAMP_CR1_TAMP2E | TAMP_CR1_TAMP3E)
#else
#define RTC_TAMPER_ALL (TAMP_CR1_TAMP1E | TAMP_CR1_TAMP2E)
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/**
* @}
*/
@@ -316,7 +316,7 @@
#define RTC_IT_TAMPALL (TAMP_IER_TAMP1IE | TAMP_IER_TAMP2IE | TAMP_IER_TAMP3IE)
#else
#define RTC_IT_TAMPALL (TAMP_IER_TAMP1IE | TAMP_IER_TAMP2IE)
-#endif
+#endif /* TAMP_CR1_TAMP3E */
#define RTC_IT_INT_TAMP3 TAMP_IER_ITAMP3IE
#define RTC_IT_INT_TAMP4 TAMP_IER_ITAMP4IE
@@ -338,7 +338,7 @@
#define RTC_FLAG_TAMPALL (RTC_FLAG_TAMP1 | RTC_FLAG_TAMP2 | RTC_FLAG_TAMP3)
#else
#define RTC_FLAG_TAMPALL (RTC_FLAG_TAMP1 | RTC_FLAG_TAMP2)
-#endif
+#endif /* TAMP_CR1_TAMP3E */
#define RTC_FLAG_INT_TAMP3 TAMP_SR_ITAMP3F
#define RTC_FLAG_INT_TAMP4 TAMP_SR_ITAMP4F
#define RTC_FLAG_INT_TAMP5 TAMP_SR_ITAMP5F
@@ -985,7 +985,7 @@
void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
#if defined(TAMP_CR1_TAMP3E)
void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
-#endif
+#endif /* TAMP_CR1_TAMP3E */
void HAL_RTCEx_InternalTamper3EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper4EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_InternalTamper5EventCallback(RTC_HandleTypeDef *hrtc);
diff --git a/Inc/stm32g0xx_hal_smartcard.h b/Inc/stm32g0xx_hal_smartcard.h
index 6040335..7b609b1 100644
--- a/Inc/stm32g0xx_hal_smartcard.h
+++ b/Inc/stm32g0xx_hal_smartcard.h
@@ -52,7 +52,8 @@
where usart_ker_ckpres is the USART input clock divided by a prescaler */
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
- This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
+ This parameter @ref SMARTCARD_Word_Length can only be
+ set to 9 (8 data + 1 parity bits). */
uint32_t StopBits; /*!< Specifies the number of stop bits.
This parameter can be a value of @ref SMARTCARD_Stop_Bits. */
@@ -76,13 +77,14 @@
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
This parameter can be a value of @ref SMARTCARD_Last_Bit */
- uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
- Selecting the single sample method increases the receiver tolerance to clock
- deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
+ uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote
+ is selected. Selecting the single sample method increases
+ the receiver tolerance to clock deviations. This parameter can be a value
+ of @ref SMARTCARD_OneBit_Sampling. */
uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler.
- This parameter can be any value from 0x01 to 0x1F. Prescaler value is multiplied
- by 2 to give the division factor of the source clock frequency */
+ This parameter can be any value from 0x01 to 0x1F. Prescaler value is
+ multiplied by 2 to give the division factor of the source clock frequency */
uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */
@@ -141,14 +143,16 @@
uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
This parameter can be a value of @ref SMARTCARD_MSB_First */
- uint16_t TxCompletionIndication; /*!< Specifies which transmission completion indication is used: before (when
- relevant flag is available) or once guard time period has elapsed.
- This parameter can be a value of @ref SMARTCARDEx_Transmission_Completion_Indication. */
+ uint16_t TxCompletionIndication; /*!< Specifies which transmission completion indication is used: before (when
+ relevant flag is available) or once guard time period has elapsed.
+ This parameter can be a value
+ of @ref SMARTCARDEx_Transmission_Completion_Indication. */
} SMARTCARD_AdvFeatureInitTypeDef;
/**
* @brief HAL SMARTCARD State definition
- * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState (see @ref SMARTCARD_State_Definition).
+ * @note HAL SMARTCARD State value is a combination of 2 different substates:
+ * gState and RxState (see @ref SMARTCARD_State_Definition).
* - gState contains SMARTCARD state information related to global Handle management
* and also information related to Tx operations.
* gState value coding follow below described bitmap :
@@ -159,7 +163,7 @@
* 11 : Error
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized. HAL SMARTCARD Init function already called)
+ * 1 : Init done (Peripheral initialized. HAL SMARTCARD Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
@@ -176,7 +180,7 @@
* xx : Should be set to 00
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized)
+ * 1 : Init done (Peripheral initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
@@ -215,7 +219,8 @@
uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */
uint32_t FifoMode; /*!< Specifies if the FIFO mode will be used.
- This parameter can be a value of @ref SMARTCARDEx_FIFO_mode. */
+ This parameter can be a value of
+ @ref SMARTCARDEx_FIFO_mode. */
void (*RxISR)(struct __SMARTCARD_HandleTypeDef *huart); /*!< Function pointer on Rx IRQ handler */
@@ -227,12 +232,14 @@
HAL_LockTypeDef Lock; /*!< Locking object */
- __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management
- and also related to Tx operations.
- This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
+ __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global
+ Handle management and also related to Tx operations.
+ This parameter can be a value
+ of @ref HAL_SMARTCARD_StateTypeDef */
__IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations.
- This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
+ This parameter can be a value
+ of @ref HAL_SMARTCARD_StateTypeDef */
__IO uint32_t ErrorCode; /*!< SmartCard Error code */
@@ -311,23 +318,26 @@
/** @defgroup SMARTCARD_State_Definition SMARTCARD State Code Definition
* @{
*/
-#define HAL_SMARTCARD_STATE_RESET 0x00000000U /*!< Peripheral is not initialized
- Value is allowed for gState and RxState */
-#define HAL_SMARTCARD_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for use
- Value is allowed for gState and RxState */
+#define HAL_SMARTCARD_STATE_RESET 0x00000000U /*!< Peripheral is not initialized. Value
+ is allowed for gState and RxState */
+#define HAL_SMARTCARD_STATE_READY 0x00000020U /*!< Peripheral Initialized and ready for
+ use. Value is allowed for gState
+ and RxState */
#define HAL_SMARTCARD_STATE_BUSY 0x00000024U /*!< an internal process is ongoing
- Value is allowed for gState only */
+ Value is allowed for gState only */
#define HAL_SMARTCARD_STATE_BUSY_TX 0x00000021U /*!< Data Transmission process is ongoing
- Value is allowed for gState only */
+ Value is allowed for gState only */
#define HAL_SMARTCARD_STATE_BUSY_RX 0x00000022U /*!< Data Reception process is ongoing
Value is allowed for RxState only */
-#define HAL_SMARTCARD_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception process is ongoing
- Not to be used for neither gState nor RxState.
- Value is result of combination (Or) between gState and RxState values */
+#define HAL_SMARTCARD_STATE_BUSY_TX_RX 0x00000023U /*!< Data Transmission and Reception
+ process is ongoing Not to be used for
+ neither gState nor RxState.
+ Value is result of combination (Or)
+ between gState and RxState values */
#define HAL_SMARTCARD_STATE_TIMEOUT 0x000000A0U /*!< Timeout state
- Value is allowed for gState only */
+ Value is allowed for gState only */
#define HAL_SMARTCARD_STATE_ERROR 0x000000E0U /*!< Error
- Value is allowed for gState only */
+ Value is allowed for gState only */
/**
* @}
*/
@@ -335,15 +345,15 @@
/** @defgroup SMARTCARD_Error_Definition SMARTCARD Error Code Definition
* @{
*/
-#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
-#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
-#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
-#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004U) /*!< frame error */
-#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
-#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
-#define HAL_SMARTCARD_ERROR_RTO ((uint32_t)0x00000020U) /*!< Receiver TimeOut error */
+#define HAL_SMARTCARD_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_SMARTCARD_ERROR_PE (0x00000001U) /*!< Parity error */
+#define HAL_SMARTCARD_ERROR_NE (0x00000002U) /*!< Noise error */
+#define HAL_SMARTCARD_ERROR_FE (0x00000004U) /*!< frame error */
+#define HAL_SMARTCARD_ERROR_ORE (0x00000008U) /*!< Overrun error */
+#define HAL_SMARTCARD_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_SMARTCARD_ERROR_RTO (0x00000020U) /*!< Receiver TimeOut error */
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
-#define HAL_SMARTCARD_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */
+#define HAL_SMARTCARD_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
/**
* @}
@@ -663,7 +673,8 @@
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
- * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before
+ * guard time interrupt (when interruption available)
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
@@ -676,9 +687,16 @@
* @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption
* @retval None
*/
-#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
- ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 |= ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\
+ SMARTCARD_CR_POS) == 1U)?\
+ ((__HANDLE__)->Instance->CR1 |= (1UL <<\
+ ((__INTERRUPT__) & SMARTCARD_IT_MASK))):\
+ ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\
+ SMARTCARD_CR_POS) == 2U)?\
+ ((__HANDLE__)->Instance->CR2 |= (1UL <<\
+ ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1UL <<\
+ ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
/** @brief Disable the specified SmartCard interrupt.
* @param __HANDLE__ specifies the SMARTCARD Handle.
@@ -688,7 +706,8 @@
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
- * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard
+ * time interrupt (when interruption available)
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
@@ -701,9 +720,16 @@
* @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption
* @retval None
*/
-#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
- ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\
+ SMARTCARD_CR_POS) == 1U)?\
+ ((__HANDLE__)->Instance->CR1 &= ~ (1U <<\
+ ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\
+ SMARTCARD_CR_POS) == 2U)?\
+ ((__HANDLE__)->Instance->CR2 &= ~ (1U <<\
+ ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U <<\
+ ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
/** @brief Check whether the specified SmartCard interrupt has occurred or not.
* @param __HANDLE__ specifies the SMARTCARD Handle.
@@ -713,7 +739,8 @@
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
- * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time
+ * interrupt (when interruption available)
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
@@ -726,8 +753,10 @@
* @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption
* @retval The new state of __INTERRUPT__ (SET or RESET).
*/
-#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\
- & ((uint32_t)0x01U << (((__INTERRUPT__) & SMARTCARD_ISR_MASK)>> SMARTCARD_ISR_POS))) != 0U) ? SET : RESET)
+#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __INTERRUPT__) (\
+ (((__HANDLE__)->Instance->ISR & (0x01UL << (((__INTERRUPT__)\
+ & SMARTCARD_ISR_MASK)>> SMARTCARD_ISR_POS)))!= 0U)\
+ ? SET : RESET)
/** @brief Check whether the specified SmartCard interrupt source is enabled or not.
* @param __HANDLE__ specifies the SMARTCARD Handle.
@@ -737,7 +766,8 @@
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
- * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time interrupt (when interruption available)
+ * @arg @ref SMARTCARD_IT_TCBGT Transmission complete before guard time
+ * interrupt (when interruption available)
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
@@ -750,9 +780,16 @@
* @arg @ref SMARTCARD_IT_TXFT TXFIFO threshold reached interruption
* @retval The new state of __INTERRUPT__ (SET or RESET).
*/
-#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 : \
- (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >> SMARTCARD_CR_POS) == 0x02U)? (__HANDLE__)->Instance->CR2 : \
- (__HANDLE__)->Instance->CR3)) & ((uint32_t)0x01U << (((uint16_t)(__INTERRUPT__)) & SMARTCARD_IT_MASK))) != 0U) ? SET : RESET)
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\
+ SMARTCARD_CR_POS) == 0x01U)?\
+ (__HANDLE__)->Instance->CR1 : \
+ (((((__INTERRUPT__) & SMARTCARD_CR_MASK) >>\
+ SMARTCARD_CR_POS) == 0x02U)?\
+ (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) &\
+ (0x01UL << (((uint16_t)(__INTERRUPT__))\
+ & SMARTCARD_IT_MASK))) != 0U)\
+ ? SET : RESET)
/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
* @param __HANDLE__ specifies the SMARTCARD Handle.
@@ -817,162 +854,6 @@
* @{
*/
-/** @brief Report the SMARTCARD clock source.
- * @param __HANDLE__ specifies the SMARTCARD Handle.
- * @param __CLOCKSOURCE__ output variable.
- * @retval the SMARTCARD clocking source, written in __CLOCKSOURCE__.
- */
-#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
-#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART2) \
- { \
- switch(__HAL_RCC_GET_USART2_SOURCE()) \
- { \
- case RCC_USART2CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART2CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART2CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART2CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART3) \
- { \
- switch(__HAL_RCC_GET_USART2_SOURCE()) \
- { \
- case RCC_USART3CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART3CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART3CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART3CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else \
- { \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- } \
- } while(0U)
-#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx)
-#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART2) \
- { \
- switch(__HAL_RCC_GET_USART2_SOURCE()) \
- { \
- case RCC_USART2CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART2CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART2CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART2CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else \
- { \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- } \
- } while(0U)
-#else
-#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else \
- { \
- (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
- } \
- } while(0U)
-#endif
/** @brief Check the Baud rate range.
* @note The maximum Baud Rate is derived from the maximum clock on G0 (64 MHz)
@@ -1181,7 +1062,8 @@
#if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
/* Callbacks Register/UnRegister functions ***********************************/
HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard,
- HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback);
+ HAL_SMARTCARD_CallbackIDTypeDef CallbackID,
+ pSMARTCARD_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard,
HAL_SMARTCARD_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
diff --git a/Inc/stm32g0xx_hal_smartcard_ex.h b/Inc/stm32g0xx_hal_smartcard_ex.h
index 8e68a64..1ae3f9f 100644
--- a/Inc/stm32g0xx_hal_smartcard_ex.h
+++ b/Inc/stm32g0xx_hal_smartcard_ex.h
@@ -196,6 +196,162 @@
* @{
*/
+/** @brief Report the SMARTCARD clock source.
+ * @param __HANDLE__ specifies the SMARTCARD Handle.
+ * @param __CLOCKSOURCE__ output variable.
+ * @retval the SMARTCARD clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
+#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0U)
+#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx)
+#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0U)
+#else
+#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0U)
+#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/** @brief Set the Transmission Completion flag
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @note If TCBGT (Transmission Complete Before Guard Time) flag is not available or if
diff --git a/Inc/stm32g0xx_hal_smbus.h b/Inc/stm32g0xx_hal_smbus.h
index ffda0fa..b987b86 100644
--- a/Inc/stm32g0xx_hal_smbus.h
+++ b/Inc/stm32g0xx_hal_smbus.h
@@ -48,42 +48,43 @@
typedef struct
{
uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value.
- This parameter calculated by referring to SMBUS initialization
- section in Reference manual */
+ This parameter calculated by referring to SMBUS initialization section
+ in Reference manual */
uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not.
- This parameter can be a value of @ref SMBUS_Analog_Filter */
+ This parameter can be a value of @ref SMBUS_Analog_Filter */
uint32_t OwnAddress1; /*!< Specifies the first device own address.
- This parameter can be a 7-bit or 10-bit address. */
+ This parameter can be a 7-bit or 10-bit address. */
uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected.
- This parameter can be a value of @ref SMBUS_addressing_mode */
+ This parameter can be a value of @ref SMBUS_addressing_mode */
uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
- This parameter can be a value of @ref SMBUS_dual_addressing_mode */
+ This parameter can be a value of @ref SMBUS_dual_addressing_mode */
uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
- This parameter can be a 7-bit address. */
+ This parameter can be a 7-bit address. */
- uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
- This parameter can be a value of @ref SMBUS_own_address2_masks. */
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknowledge mask address second device own address
+ if dual addressing mode is selected
+ This parameter can be a value of @ref SMBUS_own_address2_masks. */
uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
- This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */
+ This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */
uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
- This parameter can be a value of @ref SMBUS_nostretch_mode */
+ This parameter can be a value of @ref SMBUS_nostretch_mode */
uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected.
- This parameter can be a value of @ref SMBUS_packet_error_check_mode */
+ This parameter can be a value of @ref SMBUS_packet_error_check_mode */
uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected.
- This parameter can be a value of @ref SMBUS_peripheral_mode */
+ This parameter can be a value of @ref SMBUS_peripheral_mode */
uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value.
- (Enable bits and different timeout values)
- This parameter calculated by referring to SMBUS initialization
- section in Reference manual */
+ (Enable bits and different timeout values)
+ This parameter calculated by referring to SMBUS initialization section
+ in Reference manual */
} SMBUS_InitTypeDef;
/**
* @}
@@ -102,7 +103,7 @@
#define HAL_SMBUS_STATE_SLAVE_BUSY_RX (0x00000042U) /*!< Slave Data Reception process is ongoing */
#define HAL_SMBUS_STATE_TIMEOUT (0x00000003U) /*!< Timeout state */
#define HAL_SMBUS_STATE_ERROR (0x00000004U) /*!< Reception process is ongoing */
-#define HAL_SMBUS_STATE_LISTEN (0x00000008U) /*!< Address Listen Mode is ongoing */
+#define HAL_SMBUS_STATE_LISTEN (0x00000008U) /*!< Address Listen Mode is ongoing */
/**
* @}
*/
@@ -121,7 +122,7 @@
#define HAL_SMBUS_ERROR_ALERT (0x00000040U) /*!< Alert error */
#define HAL_SMBUS_ERROR_PECERR (0x00000080U) /*!< PEC error */
#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
-#define HAL_SMBUS_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */
+#define HAL_SMBUS_ERROR_INVALID_CALLBACK (0x00000100U) /*!< Invalid Callback error */
#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
#define HAL_SMBUS_ERROR_INVALID_PARAM (0x00000200U) /*!< Invalid Parameters error */
/**
@@ -159,17 +160,26 @@
__IO uint32_t ErrorCode; /*!< SMBUS Error code */
#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
- void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Master Tx Transfer completed callback */
- void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Master Rx Transfer completed callback */
- void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Slave Tx Transfer completed callback */
- void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Slave Rx Transfer completed callback */
- void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Listen Complete callback */
- void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Error callback */
+ void (* MasterTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+ /*!< SMBUS Master Tx Transfer completed callback */
+ void (* MasterRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+ /*!< SMBUS Master Rx Transfer completed callback */
+ void (* SlaveTxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+ /*!< SMBUS Slave Tx Transfer completed callback */
+ void (* SlaveRxCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+ /*!< SMBUS Slave Rx Transfer completed callback */
+ void (* ListenCpltCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+ /*!< SMBUS Listen Complete callback */
+ void (* ErrorCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+ /*!< SMBUS Error callback */
- void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< SMBUS Slave Address Match callback */
+ void (* AddrCallback)(struct __SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);
+ /*!< SMBUS Slave Address Match callback */
- void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Msp Init callback */
- void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus); /*!< SMBUS Msp DeInit callback */
+ void (* MspInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+ /*!< SMBUS Msp Init callback */
+ void (* MspDeInitCallback)(struct __SMBUS_HandleTypeDef *hsmbus);
+ /*!< SMBUS Msp DeInit callback */
#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
} SMBUS_HandleTypeDef;
@@ -195,8 +205,11 @@
/**
* @brief HAL SMBUS Callback pointer definition
*/
-typedef void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus); /*!< pointer to an SMBUS callback function */
-typedef void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an SMBUS Address Match callback function */
+typedef void (*pSMBUS_CallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus);
+/*!< pointer to an SMBUS callback function */
+typedef void (*pSMBUS_AddrCallbackTypeDef)(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection,
+ uint16_t AddrMatchCode);
+/*!< pointer to an SMBUS Address Match callback function */
#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
/**
@@ -358,8 +371,10 @@
#define SMBUS_IT_ADDRI I2C_CR1_ADDRIE
#define SMBUS_IT_RXI I2C_CR1_RXIE
#define SMBUS_IT_TXI I2C_CR1_TXIE
-#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI)
-#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | SMBUS_IT_RXI)
+#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | \
+ SMBUS_IT_NACKI | SMBUS_IT_TXI)
+#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | \
+ SMBUS_IT_RXI)
#define SMBUS_IT_ALERT (SMBUS_IT_ERRI)
#define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI)
/**
@@ -407,14 +422,14 @@
* @retval None
*/
#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
-#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) do{ \
- (__HANDLE__)->State = HAL_SMBUS_STATE_RESET; \
- (__HANDLE__)->MspInitCallback = NULL; \
- (__HANDLE__)->MspDeInitCallback = NULL; \
- } while(0)
+#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) do{ \
+ (__HANDLE__)->State = HAL_SMBUS_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
#else
#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET)
-#endif
+#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
/** @brief Enable the specified SMBUS interrupts.
* @param __HANDLE__ specifies the SMBUS Handle.
@@ -462,7 +477,8 @@
*
* @retval The new state of __IT__ (SET or RESET).
*/
-#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+ ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Check whether the specified SMBUS flag is set or not.
* @param __HANDLE__ specifies the SMBUS Handle.
@@ -488,7 +504,9 @@
* @retval The new state of __FLAG__ (SET or RESET).
*/
#define SMBUS_FLAG_MASK (0x0001FFFFU)
-#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
+#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) \
+ (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == \
+ ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
/** @brief Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit.
* @param __HANDLE__ specifies the SMBUS Handle.
@@ -539,15 +557,15 @@
*/
#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLE) || \
- ((FILTER) == SMBUS_ANALOGFILTER_DISABLE))
+ ((FILTER) == SMBUS_ANALOGFILTER_DISABLE))
#define IS_SMBUS_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000FU)
#define IS_SMBUS_ADDRESSING_MODE(MODE) (((MODE) == SMBUS_ADDRESSINGMODE_7BIT) || \
- ((MODE) == SMBUS_ADDRESSINGMODE_10BIT))
+ ((MODE) == SMBUS_ADDRESSINGMODE_10BIT))
#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLE) || \
- ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE))
+ ((ADDRESS) == SMBUS_DUALADDRESS_ENABLE))
#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \
((MASK) == SMBUS_OA2_MASK01) || \
@@ -565,47 +583,58 @@
((STRETCH) == SMBUS_NOSTRETCH_ENABLE))
#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLE) || \
- ((PEC) == SMBUS_PEC_ENABLE))
+ ((PEC) == SMBUS_PEC_ENABLE))
-#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \
- ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \
- ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
+#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
-#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \
- ((MODE) == SMBUS_AUTOEND_MODE) || \
- ((MODE) == SMBUS_SOFTEND_MODE) || \
- ((MODE) == SMBUS_SENDPEC_MODE) || \
- ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \
- ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \
- ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \
- ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE )))
+#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \
+ ((MODE) == SMBUS_AUTOEND_MODE) || \
+ ((MODE) == SMBUS_SOFTEND_MODE) || \
+ ((MODE) == SMBUS_SENDPEC_MODE) || \
+ ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | \
+ SMBUS_RELOAD_MODE )))
#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \
- ((REQUEST) == SMBUS_GENERATE_START_READ) || \
- ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \
- ((REQUEST) == SMBUS_NO_STARTSTOP))
+ ((REQUEST) == SMBUS_GENERATE_START_READ) || \
+ ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \
+ ((REQUEST) == SMBUS_NO_STARTSTOP))
-#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) || \
- ((REQUEST) == SMBUS_FIRST_FRAME) || \
- ((REQUEST) == SMBUS_NEXT_FRAME) || \
- ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \
- ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \
- ((REQUEST) == SMBUS_FIRST_FRAME_WITH_PEC) || \
- ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \
- ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
+#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) || \
+ ((REQUEST) == SMBUS_FIRST_FRAME) || \
+ ((REQUEST) == SMBUS_NEXT_FRAME) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_FIRST_FRAME_WITH_PEC) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
-#define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC) || \
- ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) || \
- ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC) || \
+#define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_OTHER_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_OTHER_FRAME_WITH_PEC) || \
((REQUEST) == SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC))
-#define SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN)))
-#define SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+#define SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= \
+ (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | \
+ I2C_CR1_PECEN)))
+#define SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= \
+ (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | \
+ I2C_CR2_NBYTES | I2C_CR2_RELOAD | \
+ I2C_CR2_RD_WRN)))
-#define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
- (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+#define SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | \
+ (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & \
+ (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & \
+ (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | \
+ (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
#define SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17U)
#define SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)
@@ -613,7 +642,8 @@
#define SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE)
#define SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN)
-#define SMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
+#define SMBUS_CHECK_FLAG(__ISR__, __FLAG__) ((((__ISR__) & ((__FLAG__) & SMBUS_FLAG_MASK)) == \
+ ((__FLAG__) & SMBUS_FLAG_MASK)) ? SET : RESET)
#define SMBUS_CHECK_IT_SOURCE(__CR1__, __IT__) ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x000003FFU)
@@ -623,14 +653,17 @@
* @}
*/
+/* Include SMBUS HAL Extended module */
+#include "stm32g0xx_hal_smbus_ex.h"
+
/* Exported functions --------------------------------------------------------*/
/** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions
* @{
*/
/** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
+ * @{
+ */
/* Initialization and de-initialization functions ****************************/
HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus);
@@ -642,10 +675,14 @@
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_SMBUS_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID, pSMBUS_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID);
+HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus,
+ HAL_SMBUS_CallbackIDTypeDef CallbackID,
+ pSMBUS_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus,
+ HAL_SMBUS_CallbackIDTypeDef CallbackID);
-HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, pSMBUS_AddrCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus,
+ pSMBUS_AddrCallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_SMBUS_UnRegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus);
#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
/**
@@ -653,28 +690,33 @@
*/
/** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions
- * @{
- */
+ * @{
+ */
/* IO operation functions *****************************************************/
/** @addtogroup Blocking_mode_Polling Blocking mode Polling
- * @{
- */
+ * @{
+ */
/******* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials,
+ uint32_t Timeout);
/**
* @}
*/
/** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt
- * @{
- */
+ * @{
+ */
/******* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress,
+ uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress,
+ uint8_t *pData, uint16_t Size, uint32_t XferOptions);
HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress);
-HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
-HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions);
HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
@@ -685,8 +727,8 @@
*/
/** @addtogroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
- * @{
- */
+ * @{
+ */
/******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */
void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
@@ -703,8 +745,8 @@
*/
/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions
- * @{
- */
+ * @{
+ */
/* Peripheral State and Errors functions **************************************************/
uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
diff --git a/Inc/stm32g0xx_hal_smbus_ex.h b/Inc/stm32g0xx_hal_smbus_ex.h
new file mode 100644
index 0000000..20317c1
--- /dev/null
+++ b/Inc/stm32g0xx_hal_smbus_ex.h
@@ -0,0 +1,148 @@
+/**
+ ******************************************************************************
+ * @file stm32g0xx_hal_smbus_ex.h
+ * @author MCD Application Team
+ * @brief Header file of SMBUS HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32G0xx_HAL_SMBUS_EX_H
+#define STM32G0xx_HAL_SMBUS_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32g0xx_hal_def.h"
+
+/** @addtogroup STM32G0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMBUSEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMBUSEx_Exported_Constants SMBUS Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup SMBUSEx_FastModePlus SMBUS Extended Fast Mode Plus
+ * @{
+ */
+#define SMBUS_FMP_NOT_SUPPORTED 0xAAAA0000U /*!< Fast Mode Plus not supported */
+#define SMBUS_FASTMODEPLUS_PA9 SYSCFG_CFGR1_I2C_PA9_FMP /*!< Enable Fast Mode Plus on PA9 */
+#define SMBUS_FASTMODEPLUS_PA10 SYSCFG_CFGR1_I2C_PA10_FMP /*!< Enable Fast Mode Plus on PA10 */
+#define SMBUS_FASTMODEPLUS_PB6 SYSCFG_CFGR1_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
+#define SMBUS_FASTMODEPLUS_PB7 SYSCFG_CFGR1_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
+#define SMBUS_FASTMODEPLUS_PB8 SYSCFG_CFGR1_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
+#define SMBUS_FASTMODEPLUS_PB9 SYSCFG_CFGR1_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
+#define SMBUS_FASTMODEPLUS_I2C1 SYSCFG_CFGR1_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
+#define SMBUS_FASTMODEPLUS_I2C2 SYSCFG_CFGR1_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
+#if defined(SYSCFG_CFGR1_I2C3_FMP)
+#define SMBUS_FASTMODEPLUS_I2C3 SYSCFG_CFGR1_I2C3_FMP /*!< Enable Fast Mode Plus on I2C3 pins */
+#else
+#define SMBUS_FASTMODEPLUS_I2C3 (uint32_t)(0x00000400U | SMBUS_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C3 not supported */
+#endif /* SYSCFG_CFGR1_I2C3_FMP */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SMBUSEx_Exported_Macros SMBUS Extended Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMBUSEx_Exported_Functions SMBUS Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup SMBUSEx_Exported_Functions_Group3 SMBUS Extended FastModePlus Functions
+ * @{
+ */
+void HAL_SMBUSEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_SMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SMBUSEx_Private_Constants SMBUS Extended Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SMBUSEx_Private_Macro SMBUS Extended Private Macros
+ * @{
+ */
+#define IS_SMBUS_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & SMBUS_FMP_NOT_SUPPORTED) != SMBUS_FMP_NOT_SUPPORTED) && \
+ ((((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA9)) == SMBUS_FASTMODEPLUS_PA9) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PA10)) == SMBUS_FASTMODEPLUS_PA10) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB6)) == SMBUS_FASTMODEPLUS_PB6) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB7)) == SMBUS_FASTMODEPLUS_PB7) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB8)) == SMBUS_FASTMODEPLUS_PB8) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_PB9)) == SMBUS_FASTMODEPLUS_PB9) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C1)) == SMBUS_FASTMODEPLUS_I2C1) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C2)) == SMBUS_FASTMODEPLUS_I2C2) || \
+ (((__CONFIG__) & (SMBUS_FASTMODEPLUS_I2C3)) == SMBUS_FASTMODEPLUS_I2C3)))
+/**
+ * @}
+ */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup SMBUSEx_Private_Functions SMBUS Extended Private Functions
+ * @{
+ */
+/* Private functions are defined in stm32g0xx_hal_smbus_ex.c file */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32G0xx_HAL_SMBUS_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Inc/stm32g0xx_hal_tim.h b/Inc/stm32g0xx_hal_tim.h
index 6056449..87b606b 100644
--- a/Inc/stm32g0xx_hal_tim.h
+++ b/Inc/stm32g0xx_hal_tim.h
@@ -65,8 +65,10 @@
This means in PWM mode that (N+1) corresponds to:
- the number of PWM periods in edge-aligned mode
- the number of half PWM period in center-aligned mode
- GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
- Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+ GP timers: this parameter must be a number between Min_Data = 0x00 and
+ Max_Data = 0xFF.
+ Advanced timers: this parameter must be a number between Min_Data = 0x0000 and
+ Max_Data = 0xFFFF. */
uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload.
This parameter can be a value of @ref TIM_AutoReloadPreload */
@@ -218,7 +220,8 @@
uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
This parameter can be a value of @ref TIM_ClearInput_Polarity */
uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
- This parameter must be 0: When OCRef clear feature is used with ETR source, ETR prescaler must be off */
+ This parameter must be 0: When OCRef clear feature is used with ETR source,
+ ETR prescaler must be off */
uint32_t ClearInputFilter; /*!< TIM Clear Input filter
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
} TIM_ClearInputConfigTypeDef;
@@ -268,32 +271,32 @@
*/
typedef struct
{
- uint32_t OffStateRunMode; /*!< TIM off state in run mode
- This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
- uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
- This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
- uint32_t LockLevel; /*!< TIM Lock level
- This parameter can be a value of @ref TIM_Lock_level */
- uint32_t DeadTime; /*!< TIM dead Time
- This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
- uint32_t BreakState; /*!< TIM Break State
- This parameter can be a value of @ref TIM_Break_Input_enable_disable */
- uint32_t BreakPolarity; /*!< TIM Break input polarity
- This parameter can be a value of @ref TIM_Break_Polarity */
- uint32_t BreakFilter; /*!< Specifies the break input filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
- uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input.
- This parameter can be a value of @ref TIM_Break_Input_AF_Mode */
- uint32_t Break2State; /*!< TIM Break2 State
- This parameter can be a value of @ref TIM_Break2_Input_enable_disable */
- uint32_t Break2Polarity; /*!< TIM Break2 input polarity
- This parameter can be a value of @ref TIM_Break2_Polarity */
- uint32_t Break2Filter; /*!< TIM break2 input filter.
- This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
- uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input.
- This parameter can be a value of @ref TIM_Break2_Input_AF_Mode */
- uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
- This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+
+ uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */
+
+ uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+
+ uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+
+ uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */
+
+ uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input.This parameter can be a value of @ref TIM_Break_Input_AF_Mode */
+
+ uint32_t Break2State; /*!< TIM Break2 State, This parameter can be a value of @ref TIM_Break2_Input_enable_disable */
+
+ uint32_t Break2Polarity; /*!< TIM Break2 input polarity, This parameter can be a value of @ref TIM_Break2_Polarity */
+
+ uint32_t Break2Filter; /*!< TIM break2 input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input.This parameter can be a value of @ref TIM_Break2_Input_AF_Mode */
+
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+
} TIM_BreakDeadTimeConfigTypeDef;
/**
@@ -671,10 +674,8 @@
/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
* @{
*/
-#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be
- connected to IC1, IC2, IC3 or IC4, respectively */
-#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be
- connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */
#define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
/**
* @}
@@ -934,19 +935,18 @@
* @{
*/
#define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */
-#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event
- (if none of the break inputs BRK and BRK2 is active) */
+#define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */
/**
* @}
*/
-/** @defgroup TIM_Group_Channel5 Group Channel 5 and Channel 1, 2 or 3
+/** @defgroup TIM_Group_Channel5 TIM Group Channel 5 and Channel 1, 2 or 3
* @{
*/
-#define TIM_GROUPCH5_NONE 0x00000000U /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
-#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */
-#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */
-#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */
+#define TIM_GROUPCH5_NONE 0x00000000U /*!< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC TIM_CCR5_GC5C1 /*!< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define TIM_GROUPCH5_OC2REFC TIM_CCR5_GC5C2 /*!< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define TIM_GROUPCH5_OC3REFC TIM_CCR5_GC5C3 /*!< OC3REFC is the logical AND of OC3REFC and OC5REF */
/**
* @}
*/
@@ -1086,24 +1086,24 @@
/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
* @{
*/
-#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
-#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting trom TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
+#define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */
/**
* @}
*/
@@ -1238,7 +1238,8 @@
* @brief Disable the TIM main Output.
* @param __HANDLE__ TIM handle
* @retval None
- * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
+ * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been
+ * disabled
*/
#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
do { \
@@ -1405,7 +1406,8 @@
/**
* @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31).
- * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read in an atomic way.
+ * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read
+ * in an atomic way.
* @param __HANDLE__ TIM handle.
* @retval None
mode.
@@ -1432,8 +1434,8 @@
* @brief Indicates whether or not the TIM Counter is used as downcounter.
* @param __HANDLE__ TIM handle.
* @retval False (Counter used as upcounter) or True (Counter used as downcounter)
- * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder
-mode.
+ * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode
+ * or Encoder mode.
*/
#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
@@ -1447,7 +1449,8 @@
/**
* @brief Set the TIM Counter Register value on runtime.
- * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in case of 32 bits counter TIM instance.
+ * Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in
+ * case of 32 bits counter TIM instance.
* Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros.
* @param __HANDLE__ TIM handle.
* @param __COUNTER__ specifies the Counter register new value.
@@ -1509,7 +1512,8 @@
#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
/**
- * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function.
+ * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel()
+ * function.
* @param __HANDLE__ TIM handle.
* @param __CHANNEL__ TIM Channels to be configured.
* This parameter can be one of the following values:
@@ -2117,12 +2121,18 @@
((__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__)))
#define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \
- (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \
- (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \
- (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \
- (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \
- (__HANDLE__)->ChannelState[4] = (__CHANNEL_STATE__); \
- (__HANDLE__)->ChannelState[5] = (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelState[0] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelState[1] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelState[2] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelState[3] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelState[4] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelState[5] = \
+ (__CHANNEL_STATE__); \
} while(0)
#define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\
@@ -2138,10 +2148,14 @@
((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__)))
#define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \
- (__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__); \
- (__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__); \
- (__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__); \
- (__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelNState[0] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelNState[1] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelNState[2] = \
+ (__CHANNEL_STATE__); \
+ (__HANDLE__)->ChannelNState[3] = \
+ (__CHANNEL_STATE__); \
} while(0)
/**
@@ -2316,14 +2330,14 @@
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
- uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength,
- uint32_t DataLength);
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer,
+ uint32_t BurstLength, uint32_t DataLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress,
- uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength,
- uint32_t DataLength);
+ uint32_t BurstRequestSrc, uint32_t *BurstBuffer,
+ uint32_t BurstLength, uint32_t DataLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
diff --git a/Inc/stm32g0xx_hal_tim_ex.h b/Inc/stm32g0xx_hal_tim_ex.h
index ee6e7f3..3981512 100644
--- a/Inc/stm32g0xx_hal_tim_ex.h
+++ b/Inc/stm32g0xx_hal_tim_ex.h
@@ -71,8 +71,7 @@
This parameter can be a value of @ref TIMEx_Break_Input_Source_Enable */
uint32_t Polarity; /*!< Specifies the break input source polarity.
This parameter can be a value of @ref TIMEx_Break_Input_Source_Polarity */
-}
-TIMEx_BreakInputConfigTypeDef;
+} TIMEx_BreakInputConfigTypeDef;
/**
* @}
@@ -97,7 +96,7 @@
#define TIM_TIM1_ETR_ADC1_AWD3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM1_ETR is connected to ADC1 AWD3 */
#if defined(COMP3)
#define TIM_TIM1_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM1_ETR is connected to COMP3 output */
-#endif
+#endif /* COMP3 */
#if defined(TIM2)
#define TIM_TIM2_ETR_GPIO 0x00000000U /* !< TIM2_ETR is connected to GPIO */
#define TIM_TIM2_ETR_COMP1 TIM2_AF1_ETRSEL_0 /* !< TIM2_ETR is connected to COMP1 output */
@@ -107,7 +106,7 @@
#define TIM_TIM2_ETR_MCO TIM2_AF1_ETRSEL_2 /* !< TIM2_ETR is connected to MCO */
#define TIM_TIM2_ETR_MCO2 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_0) /* !< TIM2_ETR is connected to MCO2 */
#define TIM_TIM2_ETR_COMP3 (TIM1_AF1_ETRSEL_2 | TIM1_AF1_ETRSEL_1) /* !< TIM2_ETR is connected to COMP3 output */
-#endif
+#endif /* COMP3 */
#endif /* TIM2 */
#if defined(TIM3)
#define TIM_TIM3_ETR_GPIO 0x00000000U /* !< TIM3_ETR is connected to GPIO */
@@ -136,8 +135,8 @@
/** @defgroup TIMEx_Break_Input TIM Extended Break input
* @{
*/
-#define TIM_BREAKINPUT_BRK 0x00000001U /* !< Timer break input */
-#define TIM_BREAKINPUT_BRK2 0x00000002U /* !< Timer break2 input */
+#define TIM_BREAKINPUT_BRK 0x00000001U /*!< Timer break input */
+#define TIM_BREAKINPUT_BRK2 0x00000002U /*!< Timer break2 input */
/**
* @}
*/
@@ -160,8 +159,8 @@
/** @defgroup TIMEx_Break_Input_Source_Enable TIM Extended Break input source enabling
* @{
*/
-#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /* !< Break input source is disabled */
-#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /* !< Break input source is enabled */
+#define TIM_BREAKINPUTSOURCE_DISABLE 0x00000000U /*!< Break input source is disabled */
+#define TIM_BREAKINPUTSOURCE_ENABLE 0x00000001U /*!< Break input source is enabled */
/**
* @}
*/
@@ -169,8 +168,8 @@
/** @defgroup TIMEx_Break_Input_Source_Polarity TIM Extended Break input polarity
* @{
*/
-#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /* !< Break input source is active low */
-#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /* !< Break input source is active_high */
+#define TIM_BREAKINPUTSOURCE_POLARITY_LOW 0x00000001U /*!< Break input source is active low */
+#define TIM_BREAKINPUTSOURCE_POLARITY_HIGH 0x00000000U /*!< Break input source is active_high */
/**
* @}
*/
@@ -262,17 +261,17 @@
#define TIM_TIM16_TI1_RTC_WAKEUP 0x00000003U /* !< TIM16_TI1 is connected to TRC wakeup interrupt */
#if defined(RCC_MCO2_SUPPORT)
#define TIM_TIM16_TI1_MCO2 0x00000004U /* !< TIM16_TI1 is connected to MCO2 */
-#endif
+#endif /* RCC_MCO2_SUPPORT */
#define TIM_TIM17_TI1_GPIO 0x00000000U /* !< TIM17_TI1 is connected to GPIO */
#if defined(RCC_HSI48_SUPPORT)
#define TIM_TIM17_TI1_HSI48 0x00000001U /* !< TIM17_TI1 is connected to HSI48/256 */
-#endif
+#endif /* RCC_HSI48_SUPPORT */
#define TIM_TIM17_TI1_HSE_32 0x00000002U /* !< TIM17_TI1 is connected to HSE div 32 */
#define TIM_TIM17_TI1_MCO 0x00000003U /* !< TIM17_TI1 is connected to MCO */
#if defined(RCC_MCO2_SUPPORT)
#define TIM_TIM17_TI1_MCO2 0x00000004U /* !< TIM17_TI1 is connected to MCO2 */
-#endif
+#endif /* RCC_MCO2_SUPPORT */
/**
* @}
*/
diff --git a/Inc/stm32g0xx_hal_uart.h b/Inc/stm32g0xx_hal_uart.h
index 48062ee..1bb4027 100644
--- a/Inc/stm32g0xx_hal_uart.h
+++ b/Inc/stm32g0xx_hal_uart.h
@@ -46,54 +46,54 @@
*/
typedef struct
{
- uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
- The baud rate register is computed using the following formula:
- LPUART:
- =======
- Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate)))
- where lpuart_ker_ck_pres is the UART input clock divided by a prescaler
- UART:
- =====
- - If oversampling is 16 or in LIN mode,
- Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate)))
- - If oversampling is 8,
- Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) /
- ((huart->Init.BaudRate)))[15:4]
- Baud Rate Register[3] = 0
- Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) /
- ((huart->Init.BaudRate)))[3:0]) >> 1
- where uart_ker_ck_pres is the UART input clock divided by a prescaler */
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate register is computed using the following formula:
+ LPUART:
+ =======
+ Baud Rate Register = ((256 * lpuart_ker_ckpres) / ((huart->Init.BaudRate)))
+ where lpuart_ker_ck_pres is the UART input clock divided by a prescaler
+ UART:
+ =====
+ - If oversampling is 16 or in LIN mode,
+ Baud Rate Register = ((uart_ker_ckpres) / ((huart->Init.BaudRate)))
+ - If oversampling is 8,
+ Baud Rate Register[15:4] = ((2 * uart_ker_ckpres) /
+ ((huart->Init.BaudRate)))[15:4]
+ Baud Rate Register[3] = 0
+ Baud Rate Register[2:0] = (((2 * uart_ker_ckpres) /
+ ((huart->Init.BaudRate)))[3:0]) >> 1
+ where uart_ker_ck_pres is the UART input clock divided by a prescaler */
- uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
- This parameter can be a value of @ref UARTEx_Word_Length. */
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UARTEx_Word_Length. */
- uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
- This parameter can be a value of @ref UART_Stop_Bits. */
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits. */
- uint32_t Parity; /*!< Specifies the parity mode.
- This parameter can be a value of @ref UART_Parity
- @note When parity is enabled, the computed parity is inserted
- at the MSB position of the transmitted data (9th bit when
- the word length is set to 9 data bits; 8th bit when the
- word length is set to 8 data bits). */
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
- uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
- This parameter can be a value of @ref UART_Mode. */
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode. */
- uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
- or disabled.
- This parameter can be a value of @ref UART_Hardware_Flow_Control. */
+ uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control. */
- uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled,
- to achieve higher speed (up to f_PCLK/8).
- This parameter can be a value of @ref UART_Over_Sampling. */
+ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled,
+ to achieve higher speed (up to f_PCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling. */
- uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
- Selecting the single sample method increases the receiver tolerance to clock
- deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
+ uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
- uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source.
- This parameter can be a value of @ref UART_ClockPrescaler. */
+ uint32_t ClockPrescaler; /*!< Specifies the prescaler value used to divide the UART clock source.
+ This parameter can be a value of @ref UART_ClockPrescaler. */
} UART_InitTypeDef;
@@ -151,7 +151,7 @@
* 11 : Error
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized. HAL UART Init function already called)
+ * 1 : Init done (Peripheral initialized. HAL UART Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
@@ -168,7 +168,7 @@
* xx : Should be set to 00
* b5 Peripheral initialization status
* 0 : Reset (Peripheral not initialized)
- * 1 : Init done (Peripheral not initialized)
+ * 1 : Init done (Peripheral initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
@@ -301,8 +301,9 @@
/**
* @brief HAL UART Callback pointer definition
*/
-typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */
-typedef void (*pUART_RxEventCallbackTypeDef)(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */
+typedef void (*pUART_CallbackTypeDef)(UART_HandleTypeDef *huart); /*!< pointer to an UART callback function */
+typedef void (*pUART_RxEventCallbackTypeDef)
+(struct __UART_HandleTypeDef *huart, uint16_t Pos); /*!< pointer to a UART Rx Event specific callback function */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
@@ -342,16 +343,16 @@
/** @defgroup UART_Error_Definition UART Error Definition
* @{
*/
-#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
-#define HAL_UART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
-#define HAL_UART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
-#define HAL_UART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
-#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
-#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
-#define HAL_UART_ERROR_RTO ((uint32_t)0x00000020U) /*!< Receiver Timeout error */
+#define HAL_UART_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_UART_ERROR_PE (0x00000001U) /*!< Parity error */
+#define HAL_UART_ERROR_NE (0x00000002U) /*!< Noise error */
+#define HAL_UART_ERROR_FE (0x00000004U) /*!< Frame error */
+#define HAL_UART_ERROR_ORE (0x00000008U) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_UART_ERROR_RTO (0x00000020U) /*!< Receiver Timeout error */
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
-#define HAL_UART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */
+#define HAL_UART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
* @}
@@ -1136,10 +1137,10 @@
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
-#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
- do{ \
- SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
- (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
+ do{ \
+ ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
} while(0U)
/** @brief Disable CTS flow control.
@@ -1155,10 +1156,10 @@
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
-#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
- do{ \
- CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
- (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
+ do{ \
+ ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
} while(0U)
/** @brief Enable RTS flow control.
@@ -1174,10 +1175,10 @@
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
-#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
- do{ \
- SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
- (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
+ do{ \
+ ATOMIC_SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
} while(0U)
/** @brief Disable RTS flow control.
@@ -1193,10 +1194,10 @@
* @param __HANDLE__ specifies the UART Handle.
* @retval None
*/
-#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
- do{ \
- CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
- (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
+ do{ \
+ ATOMIC_CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
} while(0U)
/**
* @}
@@ -1570,12 +1571,6 @@
/* Include UART HAL Extended module */
#include "stm32g0xx_hal_uart_ex.h"
-
-/* Prescaler Table used in BRR computation macros.
- Declared as extern here to allow use of private UART macros, outside of HAL UART functions */
-extern const uint16_t UARTPrescTable[12];
-
-
/* Exported functions --------------------------------------------------------*/
/** @addtogroup UART_Exported_Functions UART Exported Functions
* @{
@@ -1701,6 +1696,17 @@
* @}
*/
+/* Private variables -----------------------------------------------------------*/
+/** @defgroup UART_Private_variables UART Private variables
+ * @{
+ */
+/* Prescaler Table used in BRR computation macros.
+ Declared as extern here to allow use of private UART macros, outside of HAL UART functions */
+extern const uint16_t UARTPrescTable[12];
+/**
+ * @}
+ */
+
/**
* @}
*/
diff --git a/Inc/stm32g0xx_hal_uart_ex.h b/Inc/stm32g0xx_hal_uart_ex.h
index 45b06a4..1f022a8 100644
--- a/Inc/stm32g0xx_hal_uart_ex.h
+++ b/Inc/stm32g0xx_hal_uart_ex.h
@@ -99,12 +99,12 @@
* @brief UART TXFIFO threshold level
* @{
*/
-#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TXFIFO reaches 1/8 of its depth */
-#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TXFIFO reaches 1/4 of its depth */
-#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TXFIFO reaches 1/2 of its depth */
-#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TXFIFO reaches 3/4 of its depth */
-#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TXFIFO reaches 7/8 of its depth */
-#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TXFIFO becomes empty */
+#define UART_TXFIFO_THRESHOLD_1_8 0x00000000U /*!< TX FIFO reaches 1/8 of its depth */
+#define UART_TXFIFO_THRESHOLD_1_4 USART_CR3_TXFTCFG_0 /*!< TX FIFO reaches 1/4 of its depth */
+#define UART_TXFIFO_THRESHOLD_1_2 USART_CR3_TXFTCFG_1 /*!< TX FIFO reaches 1/2 of its depth */
+#define UART_TXFIFO_THRESHOLD_3_4 (USART_CR3_TXFTCFG_0|USART_CR3_TXFTCFG_1) /*!< TX FIFO reaches 3/4 of its depth */
+#define UART_TXFIFO_THRESHOLD_7_8 USART_CR3_TXFTCFG_2 /*!< TX FIFO reaches 7/8 of its depth */
+#define UART_TXFIFO_THRESHOLD_8_8 (USART_CR3_TXFTCFG_2|USART_CR3_TXFTCFG_0) /*!< TX FIFO becomes empty */
/**
* @}
*/
@@ -113,12 +113,12 @@
* @brief UART RXFIFO threshold level
* @{
*/
-#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RXFIFO FIFO reaches 1/8 of its depth */
-#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RXFIFO FIFO reaches 1/4 of its depth */
-#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RXFIFO FIFO reaches 1/2 of its depth */
-#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RXFIFO FIFO reaches 3/4 of its depth */
-#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RXFIFO FIFO reaches 7/8 of its depth */
-#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RXFIFO FIFO becomes full */
+#define UART_RXFIFO_THRESHOLD_1_8 0x00000000U /*!< RX FIFO reaches 1/8 of its depth */
+#define UART_RXFIFO_THRESHOLD_1_4 USART_CR3_RXFTCFG_0 /*!< RX FIFO reaches 1/4 of its depth */
+#define UART_RXFIFO_THRESHOLD_1_2 USART_CR3_RXFTCFG_1 /*!< RX FIFO reaches 1/2 of its depth */
+#define UART_RXFIFO_THRESHOLD_3_4 (USART_CR3_RXFTCFG_0|USART_CR3_RXFTCFG_1) /*!< RX FIFO reaches 3/4 of its depth */
+#define UART_RXFIFO_THRESHOLD_7_8 USART_CR3_RXFTCFG_2 /*!< RX FIFO reaches 7/8 of its depth */
+#define UART_RXFIFO_THRESHOLD_8_8 (USART_CR3_RXFTCFG_2|USART_CR3_RXFTCFG_0) /*!< RX FIFO becomes full */
/**
* @}
*/
@@ -174,7 +174,8 @@
HAL_StatusTypeDef HAL_UARTEx_SetTxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold);
HAL_StatusTypeDef HAL_UARTEx_SetRxFifoThreshold(UART_HandleTypeDef *huart, uint32_t Threshold);
-HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen,
+ uint32_t Timeout);
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
@@ -654,7 +655,7 @@
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0U)
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/** @brief Report the UART mask to apply to retrieve the received data
* according to the word length and to the parity bits activation.
diff --git a/Inc/stm32g0xx_hal_usart.h b/Inc/stm32g0xx_hal_usart.h
index 56f9376..4625250 100644
--- a/Inc/stm32g0xx_hal_usart.h
+++ b/Inc/stm32g0xx_hal_usart.h
@@ -48,11 +48,15 @@
{
uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
The baud rate is computed using the following formula:
- Baud Rate Register[15:4] = ((2 * fclk_pres) / ((huart->Init.BaudRate)))[15:4]
+ Baud Rate Register[15:4] = ((2 * fclk_pres) /
+ ((huart->Init.BaudRate)))[15:4]
Baud Rate Register[3] = 0
- Baud Rate Register[2:0] = (((2 * fclk_pres) / ((huart->Init.BaudRate)))[3:0]) >> 1
- where fclk_pres is the USART input clock frequency (fclk) divided by a prescaler.
- @note Oversampling by 8 is systematically applied to achieve high baud rates. */
+ Baud Rate Register[2:0] = (((2 * fclk_pres) /
+ ((huart->Init.BaudRate)))[3:0]) >> 1
+ where fclk_pres is the USART input clock frequency (fclk)
+ divided by a prescaler.
+ @note Oversampling by 8 is systematically applied to
+ achieve high baud rates. */
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref USARTEx_Word_Length. */
@@ -138,7 +142,7 @@
uint16_t NbTxDataToProcess; /*!< Number of data to process during TX ISR execution */
- uint32_t SlaveMode; /*!< Enable/Disable USART SPI Slave Mode. This parameter can be a value
+ uint32_t SlaveMode; /*!< Enable/Disable UART SPI Slave Mode. This parameter can be a value
of @ref USARTEx_Slave_Mode */
uint32_t FifoMode; /*!< Specifies if the FIFO mode will be used. This parameter can be a value
@@ -215,16 +219,17 @@
/** @defgroup USART_Error_Definition USART Error Definition
* @{
*/
-#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */
-#define HAL_USART_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */
-#define HAL_USART_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */
-#define HAL_USART_ERROR_FE ((uint32_t)0x00000004U) /*!< Frame error */
-#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */
-#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */
-#define HAL_USART_ERROR_UDR ((uint32_t)0x00000020U) /*!< SPI slave underrun error */
+#define HAL_USART_ERROR_NONE (0x00000000U) /*!< No error */
+#define HAL_USART_ERROR_PE (0x00000001U) /*!< Parity error */
+#define HAL_USART_ERROR_NE (0x00000002U) /*!< Noise error */
+#define HAL_USART_ERROR_FE (0x00000004U) /*!< Frame error */
+#define HAL_USART_ERROR_ORE (0x00000008U) /*!< Overrun error */
+#define HAL_USART_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
+#define HAL_USART_ERROR_UDR (0x00000020U) /*!< SPI slave underrun error */
#if (USE_HAL_USART_REGISTER_CALLBACKS == 1)
-#define HAL_USART_ERROR_INVALID_CALLBACK ((uint32_t)0x00000040U) /*!< Invalid Callback error */
+#define HAL_USART_ERROR_INVALID_CALLBACK (0x00000040U) /*!< Invalid Callback error */
#endif /* USE_HAL_USART_REGISTER_CALLBACKS */
+#define HAL_USART_ERROR_RTO (0x00000080U) /*!< Receiver Timeout error */
/**
* @}
*/
@@ -260,15 +265,6 @@
* @}
*/
-/** @defgroup USART_Over_Sampling USART Over Sampling
- * @{
- */
-#define USART_OVERSAMPLING_16 0x00000000U /*!< Oversampling by 16 */
-#define USART_OVERSAMPLING_8 USART_CR1_OVER8 /*!< Oversampling by 8 */
-/**
- * @}
- */
-
/** @defgroup USART_Clock USART Clock
* @{
*/
@@ -349,6 +345,7 @@
#define USART_FLAG_UDR USART_ISR_UDR /*!< SPI slave underrun error flag */
#define USART_FLAG_TXE USART_ISR_TXE_TXFNF /*!< USART transmit data register empty */
#define USART_FLAG_TXFNF USART_ISR_TXE_TXFNF /*!< USART TXFIFO not full */
+#define USART_FLAG_RTOF USART_ISR_RTOF /*!< USART receiver timeout flag */
#define USART_FLAG_TC USART_ISR_TC /*!< USART transmission complete */
#define USART_FLAG_RXNE USART_ISR_RXNE_RXFNE /*!< USART read data register not empty */
#define USART_FLAG_RXFNE USART_ISR_RXNE_RXFNE /*!< USART RXFIFO not empty */
@@ -403,6 +400,7 @@
#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
#define USART_CLEAR_UDRF USART_ICR_UDRCF /*!< SPI slave underrun error Clear Flag */
#define USART_CLEAR_TXFECF USART_ICR_TXFECF /*!< TXFIFO Empty Clear Flag */
+#define USART_CLEAR_RTOF USART_ICR_RTOCF /*!< USART receiver timeout clear flag */
/**
* @}
*/
@@ -459,6 +457,7 @@
* @arg @ref USART_FLAG_TC Transmission Complete flag
* @arg @ref USART_FLAG_RXNE Receive data register not empty flag
* @arg @ref USART_FLAG_RXFNE RXFIFO not empty flag
+ * @arg @ref USART_FLAG_RTOF Receiver Timeout flag
* @arg @ref USART_FLAG_IDLE Idle Line detection flag
* @arg @ref USART_FLAG_ORE OverRun Error flag
* @arg @ref USART_FLAG_NE Noise Error flag
@@ -479,6 +478,7 @@
* @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag
* @arg @ref USART_CLEAR_TXFECF TXFIFO empty clear Flag
* @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag
+ * @arg @ref USART_CLEAR_RTOF Receiver Timeout clear flag
* @arg @ref USART_CLEAR_UDRF SPI slave underrun error Clear Flag
* @retval None
*/
@@ -544,9 +544,12 @@
* @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error)
* @retval None
*/
-#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \
- ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 |= ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))))
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__)\
+ (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)?\
+ ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)?\
+ ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))))
/** @brief Disable the specified USART interrupt.
* @param __HANDLE__ specifies the USART Handle.
@@ -566,10 +569,12 @@
* @arg @ref USART_IT_ERR Error interrupt(Frame error, noise error, overrun error)
* @retval None
*/
-#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \
- ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & USART_IT_MASK))))
-
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__)\
+ (((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 1U)?\
+ ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((__INTERRUPT__) & USART_CR_MASK) >> USART_CR_POS) == 2U)?\
+ ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))))
/** @brief Check whether the specified USART interrupt has occurred or not.
* @param __HANDLE__ specifies the USART Handle.
@@ -592,7 +597,8 @@
* @retval The new state of __INTERRUPT__ (SET or RESET).
*/
#define __HAL_USART_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\
- & ((uint32_t)0x01U << (((__INTERRUPT__) & USART_ISR_MASK)>> USART_ISR_POS))) != 0U) ? SET : RESET)
+ & (0x01U << (((__INTERRUPT__) & USART_ISR_MASK)>>\
+ USART_ISR_POS))) != 0U) ? SET : RESET)
/** @brief Check whether the specified USART interrupt source is enabled or not.
* @param __HANDLE__ specifies the USART Handle.
@@ -614,10 +620,13 @@
* @arg @ref USART_IT_PE Parity Error interrupt
* @retval The new state of __INTERRUPT__ (SET or RESET).
*/
-#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x01U) ? (__HANDLE__)->Instance->CR1 : \
- (((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x02U) ? (__HANDLE__)->Instance->CR2 : \
- (__HANDLE__)->Instance->CR3)) & (0x01U << (((uint16_t)(__INTERRUPT__)) & USART_IT_MASK))) != 0U) ? SET : RESET)
-
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x01U) ?\
+ (__HANDLE__)->Instance->CR1 : \
+ (((((uint8_t)(__INTERRUPT__)) >> 0x05U) == 0x02U) ?\
+ (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) & (0x01U <<\
+ (((uint16_t)(__INTERRUPT__)) &\
+ USART_IT_MASK))) != 0U) ? SET : RESET)
/** @brief Clear the specified USART ISR flag, in setting the proper ICR register flag.
* @param __HANDLE__ specifies the USART Handle.
@@ -629,6 +638,7 @@
* @arg @ref USART_CLEAR_NEF Noise detected Clear Flag
* @arg @ref USART_CLEAR_OREF Overrun Error Clear Flag
* @arg @ref USART_CLEAR_IDLEF IDLE line detected Clear Flag
+ * @arg @ref USART_CLEAR_RTOF Receiver timeout clear flag
* @arg @ref USART_CLEAR_TXFECF TXFIFO empty clear Flag
* @arg @ref USART_CLEAR_TCF Transmission Complete Clear Flag
* @retval None
@@ -703,189 +713,9 @@
* @param __CLOCKPRESCALER__ USART prescaler value.
* @retval Division result
*/
-#define USART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) (((((__PCLK__)/USART_GET_DIV_FACTOR(__CLOCKPRESCALER__))*2U)\
- + ((__BAUD__)/2U)) / (__BAUD__))
-
-/** @brief Report the USART clock source.
- * @param __HANDLE__ specifies the USART Handle.
- * @param __CLOCKSOURCE__ output variable.
- * @retval the USART clocking source, written in __CLOCKSOURCE__.
- */
-#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
-#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART2) \
- { \
- switch(__HAL_RCC_GET_USART2_SOURCE()) \
- { \
- case RCC_USART2CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART2CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART2CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART2CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART3) \
- { \
- switch(__HAL_RCC_GET_USART3_SOURCE()) \
- { \
- case RCC_USART3CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART3CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART3CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART3CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART4) \
- { \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART5) \
- { \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART6) \
- { \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- } \
- else \
- { \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
- } \
- } while(0U)
-#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx)
-#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART2) \
- { \
- switch(__HAL_RCC_GET_USART2_SOURCE()) \
- { \
- case RCC_USART2CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART2CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART2CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART2CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART3) \
- { \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- } \
- else if((__HANDLE__)->Instance == USART4) \
- { \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- } \
- else \
- { \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
- } \
- } while(0U)
-#else
-#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
- do { \
- if((__HANDLE__)->Instance == USART1) \
- { \
- switch(__HAL_RCC_GET_USART1_SOURCE()) \
- { \
- case RCC_USART1CLKSOURCE_PCLK1: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- break; \
- case RCC_USART1CLKSOURCE_HSI: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
- break; \
- case RCC_USART1CLKSOURCE_SYSCLK: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
- break; \
- case RCC_USART1CLKSOURCE_LSE: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
- break; \
- default: \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
- break; \
- } \
- } \
- else if((__HANDLE__)->Instance == USART2) \
- { \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
- } \
- else \
- { \
- (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
- } \
- } while(0U)
-#endif
+#define USART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__)\
+ (((((__PCLK__)/USART_GET_DIV_FACTOR(__CLOCKPRESCALER__))*2U)\
+ + ((__BAUD__)/2U)) / (__BAUD__))
/** @brief Check USART Baud rate.
* @param __BAUDRATE__ Baudrate specified by the user.
@@ -921,14 +751,6 @@
#define IS_USART_MODE(__MODE__) ((((__MODE__) & 0xFFFFFFF3U) == 0x00U) && ((__MODE__) != 0x00U))
/**
- * @brief Ensure that USART oversampling is valid.
- * @param __SAMPLING__ USART oversampling.
- * @retval SET (__SAMPLING__ is valid) or RESET (__SAMPLING__ is invalid)
- */
-#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \
- ((__SAMPLING__) == USART_OVERSAMPLING_8))
-
-/**
* @brief Ensure that USART clock state is valid.
* @param __CLOCK__ USART clock state.
* @retval SET (__CLOCK__ is valid) or RESET (__CLOCK__ is invalid)
diff --git a/Inc/stm32g0xx_hal_usart_ex.h b/Inc/stm32g0xx_hal_usart_ex.h
index 7f719d3..9dacba3 100644
--- a/Inc/stm32g0xx_hal_usart_ex.h
+++ b/Inc/stm32g0xx_hal_usart_ex.h
@@ -45,9 +45,9 @@
/** @defgroup USARTEx_Word_Length USARTEx Word Length
* @{
*/
-#define USART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1) /*!< 7-bit long USART frame */
-#define USART_WORDLENGTH_8B 0x00000000U /*!< 8-bit long USART frame */
-#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) /*!< 9-bit long USART frame */
+#define USART_WORDLENGTH_7B (USART_CR1_M1) /*!< 7-bit long USART frame */
+#define USART_WORDLENGTH_8B (0x00000000U) /*!< 8-bit long USART frame */
+#define USART_WORDLENGTH_9B (USART_CR1_M0) /*!< 9-bit long USART frame */
/**
* @}
*/
@@ -119,6 +119,186 @@
* @{
*/
+/** @brief Report the USART clock source.
+ * @param __HANDLE__ specifies the USART Handle.
+ * @param __CLOCKSOURCE__ output variable.
+ * @retval the USART clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
+#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0U)
+#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx)
+#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0U)
+#else
+#define USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0U)
+#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/** @brief Compute the USART mask to apply to retrieve the received data
* according to the word length and to the parity bits activation.
* @note If PCE = 1, the parity bit is not included in the data extracted
@@ -169,7 +349,6 @@
} \
} while(0U)
-
/**
* @brief Ensure that USART frame length is valid.
* @param __LENGTH__ USART frame length.
diff --git a/Inc/stm32g0xx_ll_adc.h b/Inc/stm32g0xx_ll_adc.h
index a72e855..c6eff2c 100644
--- a/Inc/stm32g0xx_ll_adc.h
+++ b/Inc/stm32g0xx_ll_adc.h
@@ -54,14 +54,14 @@
/* Definition of ADC group regular sequencer bits information to be inserted */
/* into ADC group regular sequencer ranks literals definition. */
-#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ1" position in register */
-#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ2" position in register */
-#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ3" position in register */
-#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ4" position in register */
-#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ5" position in register */
-#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS (20UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ6" position in register */
-#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS (24UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ7" position in register */
-#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS (28UL) /* Value equivalent to bitfield "ADC_CHSELR_SQ8" position in register */
+#define ADC_REG_RANK_1_SQRX_BITOFFSET_POS ( 0UL) /* Equivalent to bitfield "ADC_CHSELR_SQ1" position in register */
+#define ADC_REG_RANK_2_SQRX_BITOFFSET_POS ( 4UL) /* Equivalent to bitfield "ADC_CHSELR_SQ2" position in register */
+#define ADC_REG_RANK_3_SQRX_BITOFFSET_POS ( 8UL) /* Equivalent to bitfield "ADC_CHSELR_SQ3" position in register */
+#define ADC_REG_RANK_4_SQRX_BITOFFSET_POS (12UL) /* Equivalent to bitfield "ADC_CHSELR_SQ4" position in register */
+#define ADC_REG_RANK_5_SQRX_BITOFFSET_POS (16UL) /* Equivalent to bitfield "ADC_CHSELR_SQ5" position in register */
+#define ADC_REG_RANK_6_SQRX_BITOFFSET_POS (20UL) /* Equivalent to bitfield "ADC_CHSELR_SQ6" position in register */
+#define ADC_REG_RANK_7_SQRX_BITOFFSET_POS (24UL) /* Equivalent to bitfield "ADC_CHSELR_SQ7" position in register */
+#define ADC_REG_RANK_8_SQRX_BITOFFSET_POS (28UL) /* Equivalent to bitfield "ADC_CHSELR_SQ8" position in register */
@@ -88,8 +88,8 @@
((ADC_REG_TRIG_EXT_EDGE_DEFAULT) << (4U * 3UL)) )
/* Definition of ADC group regular trigger bits information. */
-#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_CFGR1_EXTSEL" position in register */
-#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS (10UL) /* Value equivalent to bitfield "ADC_CFGR1_EXTEN" position in register */
+#define ADC_REG_TRIG_EXTSEL_BITOFFSET_POS ( 6UL) /* Equivalent to bitfield "ADC_CFGR1_EXTSEL" position in register */
+#define ADC_REG_TRIG_EXTEN_BITOFFSET_POS (10UL) /* Equivalent to bitfield "ADC_CFGR1_EXTEN" position in register */
@@ -101,8 +101,8 @@
/* GPIO pins) and internal channels (connected to internal paths) */
#define ADC_CHANNEL_ID_NUMBER_MASK (ADC_CFGR1_AWD1CH)
#define ADC_CHANNEL_ID_BITFIELD_MASK (ADC_CHSELR_CHSEL)
-#define ADC_CHANNEL_ID_NUMBER_MASK_SEQ (ADC_CHSELR_SQ1 << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) /* Value equivalent to ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer, if set to mode "fully configurable", can contain channels with a restricted channel number. Refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). */
-#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS (26UL)/* Value equivalent to bitfield "ADC_CHANNEL_ID_NUMBER_MASK" position in register */
+#define ADC_CHANNEL_ID_NUMBER_MASK_SEQ (ADC_CHSELR_SQ1 << ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS) /* Equivalent to ADC_CHANNEL_ID_NUMBER_MASK with reduced range: on this STM32 series, ADC group regular sequencer, if set to mode "fully configurable", can contain channels with a restricted channel number. Refer to function @ref LL_ADC_REG_SetSequencerConfigurable(). */
+#define ADC_CHANNEL_ID_NUMBER_BITOFFSET_POS (26UL)/* Equivalent to bitfield "ADC_CHANNEL_ID_NUMBER_MASK" position in register */
#define ADC_CHANNEL_ID_MASK (ADC_CHANNEL_ID_NUMBER_MASK | ADC_CHANNEL_ID_BITFIELD_MASK | \
ADC_CHANNEL_ID_INTERNAL_CH_MASK)
/* Equivalent mask of ADC_CHANNEL_NUMBER_MASK aligned on register LSB (bit 0) */
@@ -211,31 +211,31 @@
/* ADC registers bits positions */
-#define ADC_CFGR1_RES_BITOFFSET_POS ( 3UL) /* Value equivalent to bitfield "ADC_CFGR1_RES" position in register */
-#define ADC_CFGR1_AWDSGL_BITOFFSET_POS (22UL) /* Value equivalent to bitfield "ADC_CFGR1_AWDSGL" position in register */
-#define ADC_TR1_HT1_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_TR1_HT1" position in register */
-#define ADC_CHSELR_CHSEL0_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL0" position in register */
-#define ADC_CHSELR_CHSEL1_BITOFFSET_POS ( 1UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL1" position in register */
-#define ADC_CHSELR_CHSEL2_BITOFFSET_POS ( 2UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL2" position in register */
-#define ADC_CHSELR_CHSEL3_BITOFFSET_POS ( 3UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL3" position in register */
-#define ADC_CHSELR_CHSEL4_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL4" position in register */
-#define ADC_CHSELR_CHSEL5_BITOFFSET_POS ( 5UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL5" position in register */
-#define ADC_CHSELR_CHSEL6_BITOFFSET_POS ( 6UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL6" position in register */
-#define ADC_CHSELR_CHSEL7_BITOFFSET_POS ( 7UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL7" position in register */
-#define ADC_CHSELR_CHSEL8_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL8" position in register */
-#define ADC_CHSELR_CHSEL9_BITOFFSET_POS ( 9UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL9" position in register */
-#define ADC_CHSELR_CHSEL10_BITOFFSET_POS (10UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL10" position in register */
-#define ADC_CHSELR_CHSEL11_BITOFFSET_POS (11UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL11" position in register */
-#define ADC_CHSELR_CHSEL12_BITOFFSET_POS (12UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL12" position in register */
-#define ADC_CHSELR_CHSEL13_BITOFFSET_POS (13UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL13" position in register */
-#define ADC_CHSELR_CHSEL14_BITOFFSET_POS (14UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL14" position in register */
-#define ADC_CHSELR_CHSEL15_BITOFFSET_POS (15UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL15" position in register */
-#define ADC_CHSELR_CHSEL16_BITOFFSET_POS (16UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL16" position in register */
-#define ADC_CHSELR_CHSEL17_BITOFFSET_POS (17UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL17" position in register */
-#define ADC_CHSELR_CHSEL18_BITOFFSET_POS (18UL) /* Value equivalent to bitfield "ADC_CHSELR_CHSEL18" position in register */
-#define ADC_SMPR_SMP1_BITOFFSET_POS ( 0UL) /* Value equivalent to bitfield "ADC_SMPR_SMP1" position in register */
-#define ADC_SMPR_SMP2_BITOFFSET_POS ( 4UL) /* Value equivalent to bitfield "ADC_SMPR_SMP2" position in register */
-#define ADC_SMPR_SMPSEL0_BITOFFSET_POS ( 8UL) /* Value equivalent to bitfield "ADC_SMPR_SMPSEL0" position in register */
+#define ADC_CFGR1_RES_BITOFFSET_POS ( 3UL) /* Equivalent to bitfield "ADC_CFGR1_RES" position in register */
+#define ADC_CFGR1_AWDSGL_BITOFFSET_POS (22UL) /* Equivalent to bitfield "ADC_CFGR1_AWDSGL" position in register */
+#define ADC_TR1_HT1_BITOFFSET_POS (16UL) /* Equivalent to bitfield "ADC_TR1_HT1" position in register */
+#define ADC_CHSELR_CHSEL0_BITOFFSET_POS ( 0UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL0" position in register */
+#define ADC_CHSELR_CHSEL1_BITOFFSET_POS ( 1UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL1" position in register */
+#define ADC_CHSELR_CHSEL2_BITOFFSET_POS ( 2UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL2" position in register */
+#define ADC_CHSELR_CHSEL3_BITOFFSET_POS ( 3UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL3" position in register */
+#define ADC_CHSELR_CHSEL4_BITOFFSET_POS ( 4UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL4" position in register */
+#define ADC_CHSELR_CHSEL5_BITOFFSET_POS ( 5UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL5" position in register */
+#define ADC_CHSELR_CHSEL6_BITOFFSET_POS ( 6UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL6" position in register */
+#define ADC_CHSELR_CHSEL7_BITOFFSET_POS ( 7UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL7" position in register */
+#define ADC_CHSELR_CHSEL8_BITOFFSET_POS ( 8UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL8" position in register */
+#define ADC_CHSELR_CHSEL9_BITOFFSET_POS ( 9UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL9" position in register */
+#define ADC_CHSELR_CHSEL10_BITOFFSET_POS (10UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL10" position in register */
+#define ADC_CHSELR_CHSEL11_BITOFFSET_POS (11UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL11" position in register */
+#define ADC_CHSELR_CHSEL12_BITOFFSET_POS (12UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL12" position in register */
+#define ADC_CHSELR_CHSEL13_BITOFFSET_POS (13UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL13" position in register */
+#define ADC_CHSELR_CHSEL14_BITOFFSET_POS (14UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL14" position in register */
+#define ADC_CHSELR_CHSEL15_BITOFFSET_POS (15UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL15" position in register */
+#define ADC_CHSELR_CHSEL16_BITOFFSET_POS (16UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL16" position in register */
+#define ADC_CHSELR_CHSEL17_BITOFFSET_POS (17UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL17" position in register */
+#define ADC_CHSELR_CHSEL18_BITOFFSET_POS (18UL) /* Equivalent to bitfield "ADC_CHSELR_CHSEL18" position in register */
+#define ADC_SMPR_SMP1_BITOFFSET_POS ( 0UL) /* Equivalent to bitfield "ADC_SMPR_SMP1" position in register */
+#define ADC_SMPR_SMP2_BITOFFSET_POS ( 4UL) /* Equivalent to bitfield "ADC_SMPR_SMP2" position in register */
+#define ADC_SMPR_SMPSEL0_BITOFFSET_POS ( 8UL) /* Equivalent to bitfield "ADC_SMPR_SMPSEL0" position in register */
/* ADC registers bits groups */
@@ -330,7 +330,6 @@
ADC clock synchronous (from PCLK) with prescaler 1 must be enabled only if PCLK has a 50% duty clock cycle
(APB prescaler configured inside the RCC must be bypassed and the system clock must by 50% duty cycle).
-
This feature can be modified afterwards using unitary function @ref LL_ADC_SetClock().
For more details, refer to description of this function. */
@@ -618,17 +617,17 @@
#define LL_ADC_REG_TRIG_EXT_TIM1_CH4 ( ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM1 channel 4 event (capture compare: input capture or output capture). Trigger edge set to rising edge (default setting). */
#if defined(TIM2)
#define LL_ADC_REG_TRIG_EXT_TIM2_TRGO ( ADC_CFGR1_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM2 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM2 */
#define LL_ADC_REG_TRIG_EXT_TIM3_TRGO ( ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM3 TRGO. Trigger edge set to rising edge (default setting). */
#if defined(TIM4)
#define LL_ADC_REG_TRIG_EXT_TIM4_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM4 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM4 */
#if defined(TIM6)
#define LL_ADC_REG_TRIG_EXT_TIM6_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM6 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM6 */
#if defined(TIM15)
#define LL_ADC_REG_TRIG_EXT_TIM15_TRGO (ADC_CFGR1_EXTSEL_2 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: TIM15 TRGO. Trigger edge set to rising edge (default setting). */
-#endif
+#endif /* TIM15 */
#define LL_ADC_REG_TRIG_EXT_EXTI_LINE11 (ADC_CFGR1_EXTSEL_2 | ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0 | ADC_REG_TRIG_EXT_EDGE_DEFAULT) /*!< ADC group regular conversion trigger from external peripheral: external interrupt line 11. Trigger edge set to rising edge (default setting). */
/**
* @}
@@ -2368,17 +2367,17 @@
*/
__STATIC_INLINE uint32_t LL_ADC_REG_GetTriggerSource(ADC_TypeDef *ADCx)
{
- __IO uint32_t TriggerSource = READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTSEL | ADC_CFGR1_EXTEN);
+ __IO uint32_t trigger_source = READ_BIT(ADCx->CFGR1, ADC_CFGR1_EXTSEL | ADC_CFGR1_EXTEN);
/* Value for shift of {0; 4; 8; 12} depending on value of bitfield */
/* corresponding to ADC_CFGR1_EXTEN {0; 1; 2; 3}. */
- uint32_t ShiftExten = ((TriggerSource & ADC_CFGR1_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL));
+ uint32_t shift_exten = ((trigger_source & ADC_CFGR1_EXTEN) >> (ADC_REG_TRIG_EXTEN_BITOFFSET_POS - 2UL));
/* Set bitfield corresponding to ADC_CFGR1_EXTEN and ADC_CFGR1_EXTSEL */
/* to match with triggers literals definition. */
- return ((TriggerSource
- & (ADC_REG_TRIG_SOURCE_MASK >> ShiftExten) & ADC_CFGR1_EXTSEL)
- | ((ADC_REG_TRIG_EDGE_MASK >> ShiftExten) & ADC_CFGR1_EXTEN)
+ return ((trigger_source
+ & (ADC_REG_TRIG_SOURCE_MASK >> shift_exten) & ADC_CFGR1_EXTSEL)
+ | ((ADC_REG_TRIG_EDGE_MASK >> shift_exten) & ADC_CFGR1_EXTEN)
);
}
@@ -2625,21 +2624,21 @@
*/
__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerLength(ADC_TypeDef *ADCx)
{
- __IO uint32_t ChannelsRanks = READ_BIT(ADCx->CHSELR, ADC_CHSELR_SQ_ALL);
- uint32_t SequencerLength = LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS;
- uint32_t RankIndex;
+ __IO uint32_t channels_ranks = READ_BIT(ADCx->CHSELR, ADC_CHSELR_SQ_ALL);
+ uint32_t sequencer_length = LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS;
+ uint32_t rank_index;
/* Parse register for end of sequence identifier */
- for (RankIndex = 0UL; RankIndex < (32U - 4U); RankIndex += 4U)
+ for (rank_index = 0UL; rank_index < (32U - 4U); rank_index += 4U)
{
- if ((ChannelsRanks & (ADC_CHSELR_SQ2 << RankIndex)) == (ADC_CHSELR_SQ2 << RankIndex))
+ if ((channels_ranks & (ADC_CHSELR_SQ2 << rank_index)) == (ADC_CHSELR_SQ2 << rank_index))
{
- SequencerLength = (ADC_CHSELR_SQ2 << RankIndex);
+ sequencer_length = (ADC_CHSELR_SQ2 << rank_index);
break;
}
}
- return SequencerLength;
+ return sequencer_length;
}
/**
@@ -3244,29 +3243,29 @@
*/
__STATIC_INLINE uint32_t LL_ADC_REG_GetSequencerChannels(ADC_TypeDef *ADCx)
{
- uint32_t ChannelsBitfield = (uint32_t)READ_BIT(ADCx->CHSELR, ADC_CHSELR_CHSEL);
+ uint32_t channels_bitfield = (uint32_t)READ_BIT(ADCx->CHSELR, ADC_CHSELR_CHSEL);
- return ((((ChannelsBitfield & ADC_CHSELR_CHSEL0) >> ADC_CHSELR_CHSEL0_BITOFFSET_POS) * LL_ADC_CHANNEL_0)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL1) >> ADC_CHSELR_CHSEL1_BITOFFSET_POS) * LL_ADC_CHANNEL_1)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL2) >> ADC_CHSELR_CHSEL2_BITOFFSET_POS) * LL_ADC_CHANNEL_2)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL3) >> ADC_CHSELR_CHSEL3_BITOFFSET_POS) * LL_ADC_CHANNEL_3)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL4) >> ADC_CHSELR_CHSEL4_BITOFFSET_POS) * LL_ADC_CHANNEL_4)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL5) >> ADC_CHSELR_CHSEL5_BITOFFSET_POS) * LL_ADC_CHANNEL_5)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL6) >> ADC_CHSELR_CHSEL6_BITOFFSET_POS) * LL_ADC_CHANNEL_6)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL7) >> ADC_CHSELR_CHSEL7_BITOFFSET_POS) * LL_ADC_CHANNEL_7)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL8) >> ADC_CHSELR_CHSEL8_BITOFFSET_POS) * LL_ADC_CHANNEL_8)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL9) >> ADC_CHSELR_CHSEL9_BITOFFSET_POS) * LL_ADC_CHANNEL_9)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL10) >> ADC_CHSELR_CHSEL10_BITOFFSET_POS) * LL_ADC_CHANNEL_10)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL11) >> ADC_CHSELR_CHSEL11_BITOFFSET_POS) * LL_ADC_CHANNEL_11)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL12) >> ADC_CHSELR_CHSEL12_BITOFFSET_POS) * LL_ADC_CHANNEL_12)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL13) >> ADC_CHSELR_CHSEL13_BITOFFSET_POS) * LL_ADC_CHANNEL_13)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL14) >> ADC_CHSELR_CHSEL14_BITOFFSET_POS) * LL_ADC_CHANNEL_14)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL15) >> ADC_CHSELR_CHSEL15_BITOFFSET_POS) * LL_ADC_CHANNEL_15)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL16) >> ADC_CHSELR_CHSEL16_BITOFFSET_POS) * LL_ADC_CHANNEL_16)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL17) >> ADC_CHSELR_CHSEL17_BITOFFSET_POS) * LL_ADC_CHANNEL_17)
+ return ((((channels_bitfield & ADC_CHSELR_CHSEL0) >> ADC_CHSELR_CHSEL0_BITOFFSET_POS) * LL_ADC_CHANNEL_0)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL1) >> ADC_CHSELR_CHSEL1_BITOFFSET_POS) * LL_ADC_CHANNEL_1)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL2) >> ADC_CHSELR_CHSEL2_BITOFFSET_POS) * LL_ADC_CHANNEL_2)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL3) >> ADC_CHSELR_CHSEL3_BITOFFSET_POS) * LL_ADC_CHANNEL_3)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL4) >> ADC_CHSELR_CHSEL4_BITOFFSET_POS) * LL_ADC_CHANNEL_4)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL5) >> ADC_CHSELR_CHSEL5_BITOFFSET_POS) * LL_ADC_CHANNEL_5)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL6) >> ADC_CHSELR_CHSEL6_BITOFFSET_POS) * LL_ADC_CHANNEL_6)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL7) >> ADC_CHSELR_CHSEL7_BITOFFSET_POS) * LL_ADC_CHANNEL_7)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL8) >> ADC_CHSELR_CHSEL8_BITOFFSET_POS) * LL_ADC_CHANNEL_8)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL9) >> ADC_CHSELR_CHSEL9_BITOFFSET_POS) * LL_ADC_CHANNEL_9)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL10) >> ADC_CHSELR_CHSEL10_BITOFFSET_POS) * LL_ADC_CHANNEL_10)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL11) >> ADC_CHSELR_CHSEL11_BITOFFSET_POS) * LL_ADC_CHANNEL_11)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL12) >> ADC_CHSELR_CHSEL12_BITOFFSET_POS) * LL_ADC_CHANNEL_12)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL13) >> ADC_CHSELR_CHSEL13_BITOFFSET_POS) * LL_ADC_CHANNEL_13)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL14) >> ADC_CHSELR_CHSEL14_BITOFFSET_POS) * LL_ADC_CHANNEL_14)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL15) >> ADC_CHSELR_CHSEL15_BITOFFSET_POS) * LL_ADC_CHANNEL_15)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL16) >> ADC_CHSELR_CHSEL16_BITOFFSET_POS) * LL_ADC_CHANNEL_16)
+ | (((channels_bitfield & ADC_CHSELR_CHSEL17) >> ADC_CHSELR_CHSEL17_BITOFFSET_POS) * LL_ADC_CHANNEL_17)
#if defined(ADC_CCR_VBATEN)
- | (((ChannelsBitfield & ADC_CHSELR_CHSEL18) >> ADC_CHSELR_CHSEL18_BITOFFSET_POS) * LL_ADC_CHANNEL_18)
-#endif
+ | (((channels_bitfield & ADC_CHSELR_CHSEL18) >> ADC_CHSELR_CHSEL18_BITOFFSET_POS) * LL_ADC_CHANNEL_18)
+#endif /* ADC_CCR_VBATEN */
);
}
@@ -3771,55 +3770,55 @@
__IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->CFGR1, ((AWDy & ADC_AWD_CRX_REGOFFSET_MASK) >> ADC_AWD_CRX_REGOFFSET_POS)
+ ((AWDy & ADC_AWD_CR12_REGOFFSETGAP_MASK) * ADC_AWD_CR12_REGOFFSETGAP_VAL));
- uint32_t AnalogWDMonitChannels = (READ_BIT(*preg, AWDy) & AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK);
+ uint32_t analog_wd_monit_channels = (READ_BIT(*preg, AWDy) & AWDy & ADC_AWD_CR_ALL_CHANNEL_MASK);
- /* If "AnalogWDMonitChannels" == 0, then the selected AWD is disabled */
+ /* If "analog_wd_monit_channels" == 0, then the selected AWD is disabled */
/* (parameter value LL_ADC_AWD_DISABLE). */
/* Else, the selected AWD is enabled and is monitoring a group of channels */
/* or a single channel. */
- if (AnalogWDMonitChannels != 0UL)
+ if (analog_wd_monit_channels != 0UL)
{
if (AWDy == LL_ADC_AWD1)
{
- if ((AnalogWDMonitChannels & ADC_CFGR1_AWD1SGL) == 0UL)
+ if ((analog_wd_monit_channels & ADC_CFGR1_AWD1SGL) == 0UL)
{
/* AWD monitoring a group of channels */
- AnalogWDMonitChannels = ((AnalogWDMonitChannels
- | (ADC_AWD_CR23_CHANNEL_MASK)
- )
- & (~(ADC_CFGR1_AWD1CH))
- );
+ analog_wd_monit_channels = ((analog_wd_monit_channels
+ | (ADC_AWD_CR23_CHANNEL_MASK)
+ )
+ & (~(ADC_CFGR1_AWD1CH))
+ );
}
else
{
/* AWD monitoring a single channel */
- AnalogWDMonitChannels = (AnalogWDMonitChannels
- | (ADC_AWD2CR_AWD2CH_0 << (AnalogWDMonitChannels >> ADC_CFGR1_AWD1CH_Pos))
- );
+ analog_wd_monit_channels = (analog_wd_monit_channels
+ | (ADC_AWD2CR_AWD2CH_0 << (analog_wd_monit_channels >> ADC_CFGR1_AWD1CH_Pos))
+ );
}
}
else
{
- if ((AnalogWDMonitChannels & ADC_AWD_CR23_CHANNEL_MASK) == ADC_AWD_CR23_CHANNEL_MASK)
+ if ((analog_wd_monit_channels & ADC_AWD_CR23_CHANNEL_MASK) == ADC_AWD_CR23_CHANNEL_MASK)
{
/* AWD monitoring a group of channels */
- AnalogWDMonitChannels = (ADC_AWD_CR23_CHANNEL_MASK
- | (ADC_CFGR1_AWD1EN)
- );
+ analog_wd_monit_channels = (ADC_AWD_CR23_CHANNEL_MASK
+ | (ADC_CFGR1_AWD1EN)
+ );
}
else
{
/* AWD monitoring a single channel */
/* AWD monitoring a group of channels */
- AnalogWDMonitChannels = (AnalogWDMonitChannels
- | (ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL)
- | (__LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDMonitChannels) << ADC_CFGR1_AWD1CH_Pos)
- );
+ analog_wd_monit_channels = (analog_wd_monit_channels
+ | (ADC_CFGR1_AWD1EN | ADC_CFGR1_AWD1SGL)
+ | (__LL_ADC_CHANNEL_TO_DECIMAL_NB(analog_wd_monit_channels) << ADC_CFGR1_AWD1CH_Pos)
+ );
}
}
}
- return AnalogWDMonitChannels;
+ return analog_wd_monit_channels;
}
/**
@@ -4785,7 +4784,7 @@
/**
* @brief Enable interruption ADC channel configuration ready.
- * @rmtoll IER ADRDYIE LL_ADC_EnableIT_CCRDY
+ * @rmtoll IER CCRDYIE LL_ADC_EnableIT_CCRDY
* @param ADCx ADC instance
* @retval State of bit (1 or 0).
*/
@@ -4895,7 +4894,7 @@
/**
* @brief Disable interruption ADC channel configuration ready.
- * @rmtoll IER ADRDYIE LL_ADC_DisableIT_CCRDY
+ * @rmtoll IER CCRDYIE LL_ADC_DisableIT_CCRDY
* @param ADCx ADC instance
* @retval State of bit (1 or 0).
*/
@@ -5006,7 +5005,7 @@
/**
* @brief Get state of interruption ADC channel configuration ready.
- * @rmtoll IER ADRDYIE LL_ADC_IsEnabledIT_CCRDY
+ * @rmtoll IER CCRDYIE LL_ADC_IsEnabledIT_CCRDY
* @param ADCx ADC instance
* @retval State of bit (1 or 0).
*/
@@ -5122,19 +5121,19 @@
/* Initialization of some features of ADC common parameters and multimode */
ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON);
-ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct);
-void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct);
+ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct);
+void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct);
/* De-initialization of ADC instance */
ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx);
/* Initialization of some features of ADC instance */
-ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct);
-void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct);
+ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *pADC_InitStruct);
+void LL_ADC_StructInit(LL_ADC_InitTypeDef *pADC_InitStruct);
/* Initialization of some features of ADC instance and ADC group regular */
-ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct);
-void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct);
+ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *pADC_RegInitStruct);
+void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *pADC_RegInitStruct);
/**
* @}
diff --git a/Inc/stm32g0xx_ll_bus.h b/Inc/stm32g0xx_ll_bus.h
index 2838a65..8d81759 100644
--- a/Inc/stm32g0xx_ll_bus.h
+++ b/Inc/stm32g0xx_ll_bus.h
@@ -307,7 +307,7 @@
* AHBRSTR CRCRST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR AESRST LL_AHB1_GRP1_ForceReset\n
* AHBRSTR RNGRST LL_AHB1_GRP1_ForceReset
-* @param Periphs This parameter can be a combination of the following values:
+ * @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_AHB1_GRP1_PERIPH_ALL
* @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
* @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
diff --git a/Inc/stm32g0xx_ll_comp.h b/Inc/stm32g0xx_ll_comp.h
index bd48912..cd02750 100644
--- a/Inc/stm32g0xx_ll_comp.h
+++ b/Inc/stm32g0xx_ll_comp.h
@@ -158,7 +158,7 @@
#define LL_COMP_WINDOWOUTPUT_COMP2 (COMP_CSR_WINOUT | LL_COMP_WINDOWMODE_COMP_EVEN_REGOFFSET_MASK) /*!< Window output synthetized on COMP2 output: COMP2 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). */
#if defined(COMP3)
#define LL_COMP_WINDOWOUTPUT_COMP3 (COMP_CSR_WINOUT | LL_COMP_WINDOWMODE_COMP_ODD_REGOFFSET_MASK) /*!< Window output synthetized on COMP3 output: COMP3 output is no more indicating its own state, but global window mode state (logical high means monitored signal is within comparators window). Available only on devices featuring COMP3 instance. */
-#endif
+#endif /* COMP3 */
#define LL_COMP_WINDOWOUTPUT_BOTH (COMP_CSR_WINOUT | LL_COMP_WINDOWMODE_COMP_EVEN_REGOFFSET_MASK | LL_COMP_WINDOWOUTPUT_BOTH_SETTING_MASK) /*!< Window output synthetized on both comparators output of pair of comparator selected (COMP1 and COMP2, or COMP2 and COMP3 for devices featuring COMP3 instance): both comparators outputs are no more indicating their own state, but global window mode state (logical high means monitored signal is within comparators window). This is a specific configuration (technically possible but not relevant from application point of view: 2 comparators output used for the same signal level), standard configuration for window mode is one of the settings above. */
/**
* @}
@@ -328,7 +328,7 @@
#else
#define __LL_COMP_COMMON_INSTANCE(__COMPx__) \
(COMP12_COMMON)
-#endif
+#endif /* COMP3 */
/**
* @}
@@ -379,7 +379,7 @@
window_mode_tmp = LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON;
}
}
-#endif
+#endif /* COMP3 */
__IO uint32_t *preg = __COMP_PTR_REG_OFFSET(COMPxy_COMMON->CSR_ODD, (window_mode_tmp & LL_COMP_WINDOWMODE_COMPX_REGOFFSET_MASK));
@@ -434,7 +434,7 @@
#else
const uint32_t window_mode_comp_odd = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_ODD, COMP_CSR_WINMODE);
const uint32_t window_mode_comp_even = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_EVEN, COMP_CSR_WINMODE);
-#endif
+#endif /* COMP3 */
return (uint32_t)(window_mode_comp_odd
| window_mode_comp_even
@@ -481,7 +481,7 @@
/* No modification of other parameters */
}
}
-#endif
+#endif /* COMP3 */
__IO uint32_t *preg = __COMP_PTR_REG_OFFSET(COMPxy_COMMON->CSR_ODD, (window_output_tmp & LL_COMP_WINDOWMODE_COMPX_REGOFFSET_MASK));
@@ -538,7 +538,7 @@
#else
const uint32_t window_output_comp_odd = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_ODD, COMP_CSR_WINOUT);
const uint32_t window_output_comp_even = (uint32_t)READ_BIT(COMPxy_COMMON->CSR_EVEN, COMP_CSR_WINOUT);
-#endif
+#endif /* COMP3 */
/* Construct value corresponding to LL_COMP_WINDOWOUTPUT_xxx */
return (uint32_t)(window_output_comp_odd
diff --git a/Inc/stm32g0xx_ll_dma.h b/Inc/stm32g0xx_ll_dma.h
index cedd014..df9ef63 100644
--- a/Inc/stm32g0xx_ll_dma.h
+++ b/Inc/stm32g0xx_ll_dma.h
@@ -54,10 +54,10 @@
(uint8_t)(DMA1_Channel5_BASE - DMA1_BASE),
#if defined(DMA1_Channel6_BASE)
(uint8_t)(DMA1_Channel6_BASE - DMA1_BASE),
-#endif
+#endif /* DMA1_Channel6_BASE */
#if defined(DMA1_Channel7_BASE)
(uint8_t)(DMA1_Channel7_BASE - DMA1_BASE),
-#endif
+#endif /* DMA1_Channel7_BASE */
};
/**
* @}
@@ -191,13 +191,13 @@
#define LL_DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6 /*!< Channel 6 transfer complete flag */
#define LL_DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6 /*!< Channel 6 half transfer flag */
#define LL_DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6 /*!< Channel 6 transfer error flag */
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
#define LL_DMA_IFCR_CGIF7 DMA_IFCR_CGIF7 /*!< Channel 7 global flag */
#define LL_DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7 /*!< Channel 7 transfer complete flag */
#define LL_DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7 /*!< Channel 7 half transfer flag */
#define LL_DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7 /*!< Channel 7 transfer error flag */
-#endif
+#endif /* DMA1_Channel7 */
/**
* @}
*/
@@ -231,13 +231,13 @@
#define LL_DMA_ISR_TCIF6 DMA_ISR_TCIF6 /*!< Channel 6 transfer complete flag */
#define LL_DMA_ISR_HTIF6 DMA_ISR_HTIF6 /*!< Channel 6 half transfer flag */
#define LL_DMA_ISR_TEIF6 DMA_ISR_TEIF6 /*!< Channel 6 transfer error flag */
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
#define LL_DMA_ISR_GIF7 DMA_ISR_GIF7 /*!< Channel 7 global flag */
#define LL_DMA_ISR_TCIF7 DMA_ISR_TCIF7 /*!< Channel 7 transfer complete flag */
#define LL_DMA_ISR_HTIF7 DMA_ISR_HTIF7 /*!< Channel 7 half transfer flag */
#define LL_DMA_ISR_TEIF7 DMA_ISR_TEIF7 /*!< Channel 7 transfer error flag */
-#endif
+#endif /* DMA1_Channel7 */
/**
* @}
*/
@@ -263,10 +263,10 @@
#define LL_DMA_CHANNEL_5 0x00000004U /*!< DMA Channel 5 */
#if defined(DMA1_Channel6)
#define LL_DMA_CHANNEL_6 0x00000005U /*!< DMA Channel 6 */
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
#define LL_DMA_CHANNEL_7 0x00000006U /*!< DMA Channel 7 */
-#endif
+#endif /* DMA1_Channel7 */
#if defined(USE_FULL_LL_DRIVER)
#define LL_DMA_CHANNEL_ALL 0xFFFF0000U /*!< DMA Channel all (used only for function @ref LL_DMA_DeInit(). */
#endif /*USE_FULL_LL_DRIVER*/
@@ -387,7 +387,7 @@
(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ? DMA2 : DMA1)
#else /* DMA1 */
#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__) (DMA1)
-#endif
+#endif /* DMA2 */
/**
* @brief Convert DMAx_Channely into LL_DMA_CHANNEL_y
@@ -425,7 +425,7 @@
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
LL_DMA_CHANNEL_5)
-#endif
+#endif /* DMA1_Channel8 */
#endif /* DMA2 */
/**
@@ -465,7 +465,7 @@
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_3))) ? DMA1_Channel3 : \
(((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__CHANNEL__) == ((uint32_t)LL_DMA_CHANNEL_4))) ? DMA1_Channel4 : \
DMA1_Channel5)
-#endif
+#endif /* DMA1_Channel8 */
#endif /* DMA2 */
/**
@@ -1433,7 +1433,7 @@
return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
/**
* @brief Get Channel 7 global interrupt flag.
@@ -1446,7 +1446,7 @@
return ((READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMA1_Channel7 */
/**
* @brief Get Channel 1 transfer complete flag.
* @rmtoll ISR TCIF1 LL_DMA_IsActiveFlag_TC1
@@ -1514,7 +1514,7 @@
return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
/**
* @brief Get Channel 7 transfer complete flag.
@@ -1527,7 +1527,7 @@
return ((READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMA1_Channel7 */
/**
* @brief Get Channel 1 half transfer flag.
* @rmtoll ISR HTIF1 LL_DMA_IsActiveFlag_HT1
@@ -1595,7 +1595,7 @@
return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
/**
* @brief Get Channel 7 half transfer flag.
@@ -1608,7 +1608,7 @@
return ((READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMA1_Channel7 */
/**
* @brief Get Channel 1 transfer error flag.
* @rmtoll ISR TEIF1 LL_DMA_IsActiveFlag_TE1
@@ -1676,7 +1676,7 @@
return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
/**
* @brief Get Channel 7 transfer error flag.
@@ -1689,7 +1689,7 @@
return ((READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMA1_Channel7 */
/**
* @brief Clear Channel 1 global interrupt flag.
* @note Do not Clear Channel 1 global interrupt flag when the channel in ON.
@@ -1781,7 +1781,7 @@
WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF6);
}
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
/**
* @brief Clear Channel 7 global interrupt flag.
@@ -1798,7 +1798,7 @@
WRITE_REG(DMAx->IFCR, DMA_IFCR_CGIF7);
}
-#endif
+#endif /* DMA1_Channel7 */
/**
* @brief Clear Channel 1 transfer complete flag.
* @rmtoll IFCR CTCIF1 LL_DMA_ClearFlag_TC1
@@ -1866,7 +1866,7 @@
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF6);
}
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
/**
* @brief Clear Channel 7 transfer complete flag.
@@ -1879,7 +1879,7 @@
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTCIF7);
}
-#endif
+#endif /* DMA1_Channel7 */
/**
* @brief Clear Channel 1 half transfer flag.
* @rmtoll IFCR CHTIF1 LL_DMA_ClearFlag_HT1
@@ -1947,7 +1947,7 @@
WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF6);
}
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
/**
* @brief Clear Channel 7 half transfer flag.
@@ -1960,7 +1960,7 @@
WRITE_REG(DMAx->IFCR, DMA_IFCR_CHTIF7);
}
-#endif
+#endif /* DMA1_Channel7 */
/**
* @brief Clear Channel 1 transfer error flag.
* @rmtoll IFCR CTEIF1 LL_DMA_ClearFlag_TE1
@@ -2028,7 +2028,7 @@
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF6);
}
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
/**
* @brief Clear Channel 7 transfer error flag.
@@ -2041,7 +2041,7 @@
WRITE_REG(DMAx->IFCR, DMA_IFCR_CTEIF7);
}
-#endif
+#endif /* DMA1_Channel7 */
/**
* @}
*/
diff --git a/Inc/stm32g0xx_ll_dmamux.h b/Inc/stm32g0xx_ll_dmamux.h
index 8a1e80e..47abaa6 100644
--- a/Inc/stm32g0xx_ll_dmamux.h
+++ b/Inc/stm32g0xx_ll_dmamux.h
@@ -70,10 +70,10 @@
#define LL_DMAMUX_CFR_CSOF4 DMAMUX_CFR_CSOF4 /*!< Synchronization Event Overrun Flag Channel 4 */
#if defined(DMAMUX1_Channel5)
#define LL_DMAMUX_CFR_CSOF5 DMAMUX_CFR_CSOF5 /*!< Synchronization Event Overrun Flag Channel 5 */
-#endif
+#endif /* DMAMUX1_Channel5 */
#if defined(DMAMUX1_Channel6)
#define LL_DMAMUX_CFR_CSOF6 DMAMUX_CFR_CSOF6 /*!< Synchronization Event Overrun Flag Channel 6 */
-#endif
+#endif /* DMAMUX1_Channel6 */
#if defined(DMA2)
#define LL_DMAMUX_CFR_CSOF7 DMAMUX_CFR_CSOF7 /*!< Synchronization Event Overrun Flag Channel 7 */
#define LL_DMAMUX_CFR_CSOF8 DMAMUX_CFR_CSOF8 /*!< Synchronization Event Overrun Flag Channel 8 */
@@ -100,10 +100,10 @@
#define LL_DMAMUX_CSR_SOF4 DMAMUX_CSR_SOF4 /*!< Synchronization Event Overrun Flag Channel 4 */
#if defined(DMAMUX1_Channel5)
#define LL_DMAMUX_CSR_SOF5 DMAMUX_CSR_SOF5 /*!< Synchronization Event Overrun Flag Channel 5 */
-#endif
+#endif /* DMAMUX1_Channel5 */
#if defined(DMAMUX1_Channel6)
#define LL_DMAMUX_CSR_SOF6 DMAMUX_CSR_SOF6 /*!< Synchronization Event Overrun Flag Channel 6 */
-#endif
+#endif /* DMAMUX1_Channel6 */
#if defined(DMA2)
#define LL_DMAMUX_CSR_SOF7 DMAMUX_CSR_SOF7 /*!< Synchronization Event Overrun Flag Channel 7 */
#define LL_DMAMUX_CSR_SOF8 DMAMUX_CSR_SOF8 /*!< Synchronization Event Overrun Flag Channel 8 */
@@ -141,11 +141,11 @@
#if defined(AES)
#define LL_DMAMUX_REQ_AES_IN 0x00000006U /*!< DMAMUX AES_IN request */
#define LL_DMAMUX_REQ_AES_OUT 0x00000007U /*!< DMAMUX AES_OUT request */
-#endif
+#endif /* AES */
#if defined(DAC1)
#define LL_DMAMUX_REQ_DAC1_CH1 0x00000008U /*!< DMAMUX DAC_CH1 request */
#define LL_DMAMUX_REQ_DAC1_CH2 0x00000009U /*!< DMAMUX DAC_CH2 request */
-#endif
+#endif /* DAC1 */
#define LL_DMAMUX_REQ_I2C1_RX 0x0000000AU /*!< DMAMUX I2C1 RX request */
#define LL_DMAMUX_REQ_I2C1_TX 0x0000000BU /*!< DMAMUX I2C1 TX request */
#define LL_DMAMUX_REQ_I2C2_RX 0x0000000CU /*!< DMAMUX I2C2 RX request */
@@ -153,7 +153,7 @@
#if defined(LPUART1)
#define LL_DMAMUX_REQ_LPUART1_RX 0x0000000EU /*!< DMAMUX LPUART1 RX request */
#define LL_DMAMUX_REQ_LPUART1_TX 0x0000000FU /*!< DMAMUX LPUART1 TX request */
-#endif
+#endif /* LPUART1 */
#define LL_DMAMUX_REQ_SPI1_RX 0x00000010U /*!< DMAMUX SPI1 RX request */
#define LL_DMAMUX_REQ_SPI1_TX 0x00000011U /*!< DMAMUX SPI1 TX request */
#define LL_DMAMUX_REQ_SPI2_RX 0x00000012U /*!< DMAMUX SPI2 RX request */
@@ -171,7 +171,7 @@
#define LL_DMAMUX_REQ_TIM2_CH4 0x0000001DU /*!< DMAMUX TIM2 CH4 request */
#define LL_DMAMUX_REQ_TIM2_TRIG 0x0000001EU /*!< DMAMUX TIM2 TRIG request */
#define LL_DMAMUX_REQ_TIM2_UP 0x0000001FU /*!< DMAMUX TIM2 UP request */
-#endif
+#endif /* TIM2 */
#define LL_DMAMUX_REQ_TIM3_CH1 0x00000020U /*!< DMAMUX TIM3 CH1 request */
#define LL_DMAMUX_REQ_TIM3_CH2 0x00000021U /*!< DMAMUX TIM3 CH2 request */
#define LL_DMAMUX_REQ_TIM3_CH3 0x00000022U /*!< DMAMUX TIM3 CH3 request */
@@ -180,16 +180,16 @@
#define LL_DMAMUX_REQ_TIM3_UP 0x00000025U /*!< DMAMUX TIM3 UP request */
#if defined(TIM6)
#define LL_DMAMUX_REQ_TIM6_UP 0x00000026U /*!< DMAMUX TIM6 UP request */
-#endif
+#endif /* TIM6 */
#if defined(TIM7)
#define LL_DMAMUX_REQ_TIM7_UP 0x00000027U /*!< DMAMUX TIM7 UP request */
-#endif
+#endif /* TIM7 */
#if defined(TIM15)
#define LL_DMAMUX_REQ_TIM15_CH1 0x00000028U /*!< DMAMUX TIM15 CH1 request */
#define LL_DMAMUX_REQ_TIM15_CH2 0x00000029U /*!< DMAMUX TIM15 CH2 request */
#define LL_DMAMUX_REQ_TIM15_TRIG_COM 0x0000002AU /*!< DMAMUX TIM15 TRIG COM request */
#define LL_DMAMUX_REQ_TIM15_UP 0x0000002BU /*!< DMAMUX TIM15 UP request */
-#endif
+#endif /* TIM15 */
#define LL_DMAMUX_REQ_TIM16_CH1 0x0000002CU /*!< DMAMUX TIM16 CH1 request */
#define LL_DMAMUX_REQ_TIM16_COM 0x0000002DU /*!< DMAMUX TIM16 COM request */
#define LL_DMAMUX_REQ_TIM16_UP 0x0000002EU /*!< DMAMUX TIM16 UP request */
@@ -203,34 +203,34 @@
#if defined(USART3)
#define LL_DMAMUX_REQ_USART3_RX 0x00000036U /*!< DMAMUX USART3 RX request */
#define LL_DMAMUX_REQ_USART3_TX 0x00000037U /*!< DMAMUX USART3 TX request */
-#endif
+#endif /* USART3 */
#if defined(USART4)
#define LL_DMAMUX_REQ_USART4_RX 0x00000038U /*!< DMAMUX USART4 RX request */
#define LL_DMAMUX_REQ_USART4_TX 0x00000039U /*!< DMAMUX USART4 TX request */
-#endif
+#endif /* USART4 */
#if defined(UCPD1)
#define LL_DMAMUX_REQ_UCPD1_RX 0x0000003AU /*!< DMAMUX UCPD1 RX request */
#define LL_DMAMUX_REQ_UCPD1_TX 0x0000003BU /*!< DMAMUX UCPD1 TX request */
-#endif
+#endif /* UCPD1 */
#if defined(UCPD2)
#define LL_DMAMUX_REQ_UCPD2_RX 0x0000003CU /*!< DMAMUX UCPD2 RX request */
#define LL_DMAMUX_REQ_UCPD2_TX 0x0000003DU /*!< DMAMUX UCPD2 TX request */
-#endif
+#endif /* UCPD2 */
#if defined(I2C3)
#define LL_DMAMUX_REQ_I2C3_RX 0x0000003EU /*!< DMAMUX I2C3 RX request */
#define LL_DMAMUX_REQ_I2C3_TX 0x0000003FU /*!< DMAMUX I2C3 TX request */
-#endif
+#endif /* I2C3 */
#if defined(LPUART2)
#define LL_DMAMUX_REQ_LPUART2_RX 0x00000040U /*!< DMAMUX LPUART2 RX request */
#define LL_DMAMUX_REQ_LPUART2_TX 0x00000041U /*!< DMAMUX LPUART2 TX request */
-#endif
+#endif /* LPUART2 */
#if defined(SPI3)
#define LL_DMAMUX_REQ_SPI3_RX 0x00000042U /*!< DMAMUX SPI3 RX request */
#define LL_DMAMUX_REQ_SPI3_TX 0x00000043U /*!< DMAMUX SPI3 TX request */
-#endif
+#endif /* SPI3 */
#if defined(TIM4)
#define LL_DMAMUX_REQ_TIM4_CH1 0x00000044U /*!< DMAMUX TIM4 CH1 request */
@@ -239,17 +239,17 @@
#define LL_DMAMUX_REQ_TIM4_CH4 0x00000047U /*!< DMAMUX TIM4 CH4 request */
#define LL_DMAMUX_REQ_TIM4_TRIG 0x00000048U /*!< DMAMUX TIM4 TRIG request */
#define LL_DMAMUX_REQ_TIM4_UP 0x00000049U /*!< DMAMUX TIM4 UP request */
-#endif
+#endif /* TIM4 */
#if defined(USART5)
#define LL_DMAMUX_REQ_USART5_RX 0x0000004AU /*!< DMAMUX USART5 RX request */
#define LL_DMAMUX_REQ_USART5_TX 0x0000004BU /*!< DMAMUX USART5 TX request */
-#endif
+#endif /* USART5 */
#if defined(USART6)
#define LL_DMAMUX_REQ_USART6_RX 0x0000004CU /*!< DMAMUX USART6 RX request */
#define LL_DMAMUX_REQ_USART6_TX 0x0000004DU /*!< DMAMUX USART6 TX request */
-#endif
+#endif /* USART6 */
#if defined(STM32G0C1xx)||defined(STM32G0B1xx)
#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART6_TX
@@ -261,7 +261,7 @@
#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART4_TX
#else
#define LL_DMAMUX_MAX_REQ LL_DMAMUX_REQ_USART2_TX
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @}
*/
@@ -276,17 +276,17 @@
#define LL_DMAMUX_CHANNEL_4 0x00000004U /*!< DMAMUX Channel 4 connected to DMA1 Channel 5 */
#if defined(DMAMUX1_Channel5)
#define LL_DMAMUX_CHANNEL_5 0x00000005U /*!< DMAMUX Channel 5 connected to DMA1 Channel 6 */
-#endif
+#endif /* DMAMUX1_Channel5 */
#if defined(DMAMUX1_Channel6)
#define LL_DMAMUX_CHANNEL_6 0x00000006U /*!< DMAMUX Channel 6 connected to DMA1 Channel 7 */
-#endif
+#endif /* DMAMUX1_Channel6 */
#if defined(DMA2)
#define LL_DMAMUX_CHANNEL_7 0x00000007U /*!< DMAMUX Channel 7 connected to DMA2 Channel 1 */
#define LL_DMAMUX_CHANNEL_8 0x00000008U /*!< DMAMUX Channel 8 connected to DMA2 Channel 2 */
#define LL_DMAMUX_CHANNEL_9 0x00000009U /*!< DMAMUX Channel 9 connected to DMA2 Channel 3 */
#define LL_DMAMUX_CHANNEL_10 0x0000000AU /*!< DMAMUX Channel 10 connected to DMA2 Channel 4 */
#define LL_DMAMUX_CHANNEL_11 0x0000000BU /*!< DMAMUX Channel 11 connected to DMA2 Channel 5 */
-#endif
+#endif /* DMA2 */
/**
* @}
*/
@@ -327,10 +327,10 @@
#define LL_DMAMUX_SYNC_DMAMUX_CH3 (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_1 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from DMAMUX channel3 Event */
#if defined(LPTIM1)
#define LL_DMAMUX_SYNC_LPTIM1_OUT (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2) /*!< Synchronization signal from LPTIM1 Output */
-#endif
+#endif /* LPTIM1 */
#if defined(LPTIM2)
#define LL_DMAMUX_SYNC_LPTIM2_OUT (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_0) /*!< Synchronization signal from LPTIM2 Output */
-#endif
+#endif /* LPTIM2 */
#define LL_DMAMUX_SYNC_TIM14_OC (DMAMUX_CxCR_SYNC_ID_4 | DMAMUX_CxCR_SYNC_ID_2 | DMAMUX_CxCR_SYNC_ID_1) /*!< Synchronization signal from TIM14 OC */
/**
* @}
@@ -383,10 +383,10 @@
#define LL_DMAMUX_REQ_GEN_DMAMUX_CH3 (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_1 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from DMAMUX channel3 Event */
#if defined(LPTIM1)
#define LL_DMAMUX_REQ_GEN_LPTIM1_OUT (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2) /*!< Request signal generation from LPTIM1 Output */
-#endif
+#endif /* LPTIM1 */
#if defined(LPTIM2)
#define LL_DMAMUX_REQ_GEN_LPTIM2_OUT (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_0) /*!< Request signal generation from LPTIM2 Output */
-#endif
+#endif /* LPTIM2 */
#define LL_DMAMUX_REQ_GEN_TIM14_OC (DMAMUX_RGxCR_SIG_ID_4 | DMAMUX_RGxCR_SIG_ID_2 | DMAMUX_RGxCR_SIG_ID_1) /*!< Request signal generation from TIM14 OC */
/**
* @}
@@ -1316,7 +1316,7 @@
return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF5) == (DMAMUX_CSR_SOF5)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMAMUX1_Channel5 */
#if defined(DMAMUX1_Channel6)
/**
* @brief Get Synchronization Event Overrun Flag Channel 6.
@@ -1330,7 +1330,7 @@
return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF6) == (DMAMUX_CSR_SOF6)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMAMUX1_Channel6 */
#if defined(DMAMUX1_Channel7)
/**
* @brief Get Synchronization Event Overrun Flag Channel 7.
@@ -1344,7 +1344,7 @@
return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF7) == (DMAMUX_CSR_SOF7)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMAMUX1_Channel7 */
#if defined(DMAMUX1_Channel8)
/**
* @brief Get Synchronization Event Overrun Flag Channel 8.
@@ -1358,7 +1358,7 @@
return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF8) == (DMAMUX_CSR_SOF8)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMAMUX1_Channel8 */
#if defined(DMAMUX1_Channel9)
/**
* @brief Get Synchronization Event Overrun Flag Channel 9.
@@ -1372,7 +1372,7 @@
return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF9) == (DMAMUX_CSR_SOF9)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMAMUX1_Channel9 */
#if defined(DMAMUX1_Channel10)
/**
* @brief Get Synchronization Event Overrun Flag Channel 10.
@@ -1386,7 +1386,7 @@
return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF10) == (DMAMUX_CSR_SOF10)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMAMUX1_Channel10 */
#if defined(DMAMUX1_Channel11)
/**
* @brief Get Synchronization Event Overrun Flag Channel 11.
@@ -1400,7 +1400,7 @@
return ((READ_BIT(DMAMUX1_ChannelStatus->CSR, DMAMUX_CSR_SOF11) == (DMAMUX_CSR_SOF11)) ? 1UL : 0UL);
}
-#endif
+#endif /* DMAMUX1_Channel11 */
/**
* @brief Get Request Generator 0 Trigger Event Overrun Flag.
* @rmtoll RGSR OF0 LL_DMAMUX_IsActiveFlag_RGO0
@@ -1522,7 +1522,7 @@
SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF5);
}
-#endif
+#endif /* DMAMUX1_Channel5 */
#if defined(DMAMUX1_Channel6)
/**
* @brief Clear Synchronization Event Overrun Flag Channel 6.
@@ -1536,7 +1536,7 @@
SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF6);
}
-#endif
+#endif /* DMAMUX1_Channel6 */
#if defined(DMAMUX1_Channel7)
/**
* @brief Clear Synchronization Event Overrun Flag Channel 7.
@@ -1550,7 +1550,7 @@
SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF7);
}
-#endif
+#endif /* DMAMUX1_Channel7 */
#if defined(DMAMUX1_Channel8)
/**
* @brief Clear Synchronization Event Overrun Flag Channel 8.
@@ -1564,7 +1564,7 @@
SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF8);
}
-#endif
+#endif /* DMAMUX1_Channel8 */
#if defined(DMAMUX1_Channel9)
/**
* @brief Clear Synchronization Event Overrun Flag Channel 9.
@@ -1578,7 +1578,7 @@
SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF9);
}
-#endif
+#endif /* DMAMUX1_Channel9 */
#if defined(DMAMUX1_Channel10)
/**
* @brief Clear Synchronization Event Overrun Flag Channel 10.
@@ -1592,7 +1592,7 @@
SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF10);
}
-#endif
+#endif /* DMAMUX1_Channel10 */
#if defined(DMAMUX1_Channel11)
/**
* @brief Clear Synchronization Event Overrun Flag Channel 11.
@@ -1606,7 +1606,7 @@
SET_BIT(DMAMUX1_ChannelStatus->CFR, DMAMUX_CFR_CSOF11);
}
-#endif
+#endif /* DMAMUX1_Channel11 */
/**
* @brief Clear Request Generator 0 Trigger Event Overrun Flag.
* @rmtoll RGCFR COF0 LL_DMAMUX_ClearFlag_RGO0
diff --git a/Inc/stm32g0xx_ll_exti.h b/Inc/stm32g0xx_ll_exti.h
index 8b5fa64..8ee8376 100644
--- a/Inc/stm32g0xx_ll_exti.h
+++ b/Inc/stm32g0xx_ll_exti.h
@@ -65,7 +65,7 @@
#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
uint32_t Line_32_63; /*!< Specifies the EXTI lines to be enabled or disabled for Lines in range 32 to 63
This parameter can be any combination of @ref EXTI_LL_EC_LINE */
-#endif
+#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
FunctionalState LineCommand; /*!< Specifies the new state of the selected EXTI lines.
This parameter can be set either to ENABLE or DISABLE */
@@ -107,68 +107,68 @@
#define LL_EXTI_LINE_15 EXTI_IMR1_IM15 /*!< Extended line 15 */
#if defined(EXTI_IMR1_IM16)
#define LL_EXTI_LINE_16 EXTI_IMR1_IM16 /*!< Extended line 16 */
-#endif
+#endif /* EXTI_IMR1_IM16 */
#if defined(EXTI_IMR1_IM17)
#define LL_EXTI_LINE_17 EXTI_IMR1_IM17 /*!< Extended line 17 */
-#endif
+#endif /* EXTI_IMR1_IM17 */
#if defined(EXTI_IMR1_IM18)
#define LL_EXTI_LINE_18 EXTI_IMR1_IM18 /*!< Extended line 18 */
-#endif
+#endif /* EXTI_IMR1_IM18 */
#define LL_EXTI_LINE_19 EXTI_IMR1_IM19 /*!< Extended line 19 */
#if defined(EXTI_IMR1_IM20)
#define LL_EXTI_LINE_20 EXTI_IMR1_IM20 /*!< Extended line 20 */
-#endif
+#endif /* EXTI_IMR1_IM20 */
#if defined(EXTI_IMR1_IM21)
#define LL_EXTI_LINE_21 EXTI_IMR1_IM21 /*!< Extended line 21 */
-#endif
+#endif /* EXTI_IMR1_IM21 */
#if defined(EXTI_IMR1_IM22)
#define LL_EXTI_LINE_22 EXTI_IMR1_IM22 /*!< Extended line 22 */
-#endif
+#endif /* EXTI_IMR1_IM22 */
#define LL_EXTI_LINE_23 EXTI_IMR1_IM23 /*!< Extended line 23 */
#if defined(EXTI_IMR1_IM24)
#define LL_EXTI_LINE_24 EXTI_IMR1_IM24 /*!< Extended line 24 */
-#endif
+#endif /* EXTI_IMR1_IM24 */
#if defined(EXTI_IMR1_IM25)
#define LL_EXTI_LINE_25 EXTI_IMR1_IM25 /*!< Extended line 25 */
-#endif
+#endif /* EXTI_IMR1_IM25 */
#if defined(EXTI_IMR1_IM26)
#define LL_EXTI_LINE_26 EXTI_IMR1_IM26 /*!< Extended line 26 */
-#endif
+#endif /* EXTI_IMR1_IM26 */
#if defined(EXTI_IMR1_IM27)
#define LL_EXTI_LINE_27 EXTI_IMR1_IM27 /*!< Extended line 27 */
-#endif
+#endif /* EXTI_IMR1_IM27 */
#if defined(EXTI_IMR1_IM28)
#define LL_EXTI_LINE_28 EXTI_IMR1_IM28 /*!< Extended line 28 */
-#endif
+#endif /* EXTI_IMR1_IM28 */
#if defined(EXTI_IMR1_IM29)
#define LL_EXTI_LINE_29 EXTI_IMR1_IM29 /*!< Extended line 29 */
-#endif
+#endif /* EXTI_IMR1_IM29 */
#if defined(EXTI_IMR1_IM30)
#define LL_EXTI_LINE_30 EXTI_IMR1_IM30 /*!< Extended line 30 */
-#endif
+#endif /* EXTI_IMR1_IM30 */
#if defined(EXTI_IMR1_IM31)
#define LL_EXTI_LINE_31 EXTI_IMR1_IM31 /*!< Extended line 31 */
-#endif
+#endif /* EXTI_IMR1_IM31 */
#define LL_EXTI_LINE_ALL_0_31 EXTI_IMR1_IM /*!< All Extended line not reserved*/
#if defined(EXTI_IMR2_IM32)
#define LL_EXTI_LINE_32 EXTI_IMR2_IM32 /*!< Extended line 32 */
-#endif
+#endif /* EXTI_IMR2_IM32 */
#if defined(EXTI_IMR2_IM33)
#define LL_EXTI_LINE_33 EXTI_IMR2_IM33 /*!< Extended line 33 */
-#endif
+#endif /* EXTI_IMR2_IM33 */
#if defined(EXTI_IMR2_IM34)
#define LL_EXTI_LINE_34 EXTI_IMR2_IM34 /*!< Extended line 34 */
-#endif
+#endif /* EXTI_IMR2_IM34 */
#if defined(EXTI_IMR2_IM35)
#define LL_EXTI_LINE_35 EXTI_IMR2_IM35 /*!< Extended line 35 */
-#endif
+#endif /* EXTI_IMR2_IM35 */
#if defined(EXTI_IMR2_IM36)
#define LL_EXTI_LINE_36 EXTI_IMR2_IM36 /*!< Extended line 36 */
-#endif
+#endif /* EXTI_IMR2_IM36 */
#if defined(EXTI_IMR2_IM32) || defined(EXTI_IMR2_IM33) || defined(EXTI_IMR2_IM34) || defined(EXTI_IMR2_IM35) || defined(EXTI_IMR2_IM36)
#define LL_EXTI_LINE_ALL_32_63 EXTI_IMR2_IM /*!< All Extended line not reserved*/
-#endif
+#endif /* EXTI_IMR2_IM32 || EXTI_IMR2_IM33 || EXTI_IMR2_IM34 || EXTI_IMR2_IM35 || EXTI_IMR2_IM36 */
#define LL_EXTI_LINE_ALL 0xFFFFFFFFU /*!< All Extended line */
@@ -358,7 +358,7 @@
{
SET_BIT(EXTI->IMR2, ExtiLine);
}
-#endif
+#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/**
* @brief Disable ExtiLine Interrupt request for Lines in range 0 to 31
@@ -426,7 +426,7 @@
{
CLEAR_BIT(EXTI->IMR2, ExtiLine);
}
-#endif
+#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/**
* @brief Indicate if ExtiLine Interrupt request is enabled for Lines in range 0 to 31
@@ -493,7 +493,7 @@
{
return ((READ_BIT(EXTI->IMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
-#endif
+#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/**
* @}
@@ -564,7 +564,7 @@
{
SET_BIT(EXTI->EMR2, ExtiLine);
}
-#endif
+#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/**
* @brief Disable ExtiLine Event request for Lines in range 0 to 31
* @rmtoll EMR1 EMx LL_EXTI_DisableEvent_0_31
@@ -686,7 +686,7 @@
{
return ((READ_BIT(EXTI->EMR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
-#endif
+#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/**
* @}
@@ -756,7 +756,7 @@
SET_BIT(EXTI->RTSR2, ExtiLine);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @brief Disable ExtiLine Rising Edge Trigger for Lines in range 0 to 31
@@ -819,7 +819,7 @@
CLEAR_BIT(EXTI->RTSR2, ExtiLine);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @brief Check if rising edge trigger is enabled for Lines in range 0 to 31
@@ -865,7 +865,7 @@
{
return ((READ_BIT(EXTI->RTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @}
@@ -934,7 +934,7 @@
{
SET_BIT(EXTI->FTSR2, ExtiLine);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @brief Disable ExtiLine Falling Edge Trigger for Lines in range 0 to 31
@@ -993,7 +993,7 @@
{
CLEAR_BIT(EXTI->FTSR2, ExtiLine);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @brief Check if falling edge trigger is enabled for Lines in range 0 to 31
@@ -1040,7 +1040,7 @@
{
return ((READ_BIT(EXTI->FTSR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @}
*/
@@ -1104,7 +1104,7 @@
{
SET_BIT(EXTI->SWIER2, ExtiLine);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @}
@@ -1163,7 +1163,7 @@
{
return ((READ_BIT(EXTI->FPR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @brief Read ExtLine Combination Falling Flag for Lines in range 0 to 31
@@ -1214,7 +1214,7 @@
{
return (READ_BIT(EXTI->FPR2, ExtiLine));
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @brief Clear ExtLine Falling Flags for Lines in range 0 to 31
@@ -1265,7 +1265,7 @@
{
WRITE_REG(EXTI->FPR2, ExtiLine);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @brief Check if the ExtLine Rising Flag is set or not for Lines in range 0 to 31
@@ -1316,7 +1316,7 @@
{
return ((READ_BIT(EXTI->RPR2, ExtiLine) == (ExtiLine)) ? 1UL : 0UL);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @brief Read ExtLine Combination Rising Flag for Lines in range 0 to 31
@@ -1367,7 +1367,7 @@
{
return (READ_BIT(EXTI->RPR2, ExtiLine));
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @brief Clear ExtLine Rising Flags for Lines in range 0 to 31
@@ -1418,7 +1418,7 @@
{
WRITE_REG(EXTI->RPR2, ExtiLine);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
/**
* @}
diff --git a/Inc/stm32g0xx_ll_gpio.h b/Inc/stm32g0xx_ll_gpio.h
index ca4771e..a612ddf 100644
--- a/Inc/stm32g0xx_ll_gpio.h
+++ b/Inc/stm32g0xx_ll_gpio.h
@@ -200,7 +200,7 @@
#define LL_GPIO_AF_8 (0x0000008U) /*!< Select alternate function 8 */
#define LL_GPIO_AF_9 (0x0000009U) /*!< Select alternate function 9 */
#define LL_GPIO_AF_10 (0x000000AU) /*!< Select alternate function 10 */
-#endif
+#endif /* STM32G0B0xx || STM32G0B1xx || STM32G0C1xx */
/**
* @}
*/
diff --git a/Inc/stm32g0xx_ll_i2c.h b/Inc/stm32g0xx_ll_i2c.h
index b8bb7c8..0140b88 100644
--- a/Inc/stm32g0xx_ll_i2c.h
+++ b/Inc/stm32g0xx_ll_i2c.h
@@ -69,38 +69,46 @@
uint32_t PeripheralMode; /*!< Specifies the peripheral mode.
This parameter can be a value of @ref I2C_LL_EC_PERIPHERAL_MODE.
- This feature can be modified afterwards using unitary function @ref LL_I2C_SetMode(). */
+ This feature can be modified afterwards using unitary function
+ @ref LL_I2C_SetMode(). */
uint32_t Timing; /*!< Specifies the SDA setup, hold time and the SCL high, low period values.
This parameter must be set by referring to the STM32CubeMX Tool and
the helper macro @ref __LL_I2C_CONVERT_TIMINGS().
- This feature can be modified afterwards using unitary function @ref LL_I2C_SetTiming(). */
+ This feature can be modified afterwards using unitary function
+ @ref LL_I2C_SetTiming(). */
uint32_t AnalogFilter; /*!< Enables or disables analog noise filter.
This parameter can be a value of @ref I2C_LL_EC_ANALOGFILTER_SELECTION.
- This feature can be modified afterwards using unitary functions @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */
+ This feature can be modified afterwards using unitary functions
+ @ref LL_I2C_EnableAnalogFilter() or LL_I2C_DisableAnalogFilter(). */
uint32_t DigitalFilter; /*!< Configures the digital noise filter.
This parameter can be a number between Min_Data = 0x00 and Max_Data = 0x0F.
- This feature can be modified afterwards using unitary function @ref LL_I2C_SetDigitalFilter(). */
+ This feature can be modified afterwards using unitary function
+ @ref LL_I2C_SetDigitalFilter(). */
uint32_t OwnAddress1; /*!< Specifies the device own address 1.
This parameter must be a value between Min_Data = 0x00 and Max_Data = 0x3FF.
- This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */
+ This feature can be modified afterwards using unitary function
+ @ref LL_I2C_SetOwnAddress1(). */
- uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte.
+ uint32_t TypeAcknowledge; /*!< Specifies the ACKnowledge or Non ACKnowledge condition after the address receive
+ match code or next received byte.
This parameter can be a value of @ref I2C_LL_EC_I2C_ACKNOWLEDGE.
- This feature can be modified afterwards using unitary function @ref LL_I2C_AcknowledgeNextData(). */
+ This feature can be modified afterwards using unitary function
+ @ref LL_I2C_AcknowledgeNextData(). */
uint32_t OwnAddrSize; /*!< Specifies the device own address 1 size (7-bit or 10-bit).
This parameter can be a value of @ref I2C_LL_EC_OWNADDRESS1.
- This feature can be modified afterwards using unitary function @ref LL_I2C_SetOwnAddress1(). */
+ This feature can be modified afterwards using unitary function
+ @ref LL_I2C_SetOwnAddress1(). */
} LL_I2C_InitTypeDef;
/**
* @}
@@ -170,10 +178,11 @@
/** @defgroup I2C_LL_EC_PERIPHERAL_MODE Peripheral Mode
* @{
*/
-#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */
-#define LL_I2C_MODE_SMBUS_HOST I2C_CR1_SMBHEN /*!< SMBus Host address acknowledge */
-#define LL_I2C_MODE_SMBUS_DEVICE 0x00000000U /*!< SMBus Device default mode (Default address not acknowledge) */
-#define LL_I2C_MODE_SMBUS_DEVICE_ARP I2C_CR1_SMBDEN /*!< SMBus Device Default address acknowledge */
+#define LL_I2C_MODE_I2C 0x00000000U /*!< I2C Master or Slave mode */
+#define LL_I2C_MODE_SMBUS_HOST I2C_CR1_SMBHEN /*!< SMBus Host address acknowledge */
+#define LL_I2C_MODE_SMBUS_DEVICE 0x00000000U /*!< SMBus Device default mode
+ (Default address not acknowledge) */
+#define LL_I2C_MODE_SMBUS_DEVICE_ARP I2C_CR1_SMBDEN /*!< SMBus Device Default address acknowledge */
/**
* @}
*/
@@ -208,14 +217,15 @@
/** @defgroup I2C_LL_EC_OWNADDRESS2 Own Address 2 Masks
* @{
*/
-#define LL_I2C_OWNADDRESS2_NOMASK I2C_OAR2_OA2NOMASK /*!< Own Address2 No mask. */
-#define LL_I2C_OWNADDRESS2_MASK01 I2C_OAR2_OA2MASK01 /*!< Only Address2 bits[7:2] are compared. */
-#define LL_I2C_OWNADDRESS2_MASK02 I2C_OAR2_OA2MASK02 /*!< Only Address2 bits[7:3] are compared. */
-#define LL_I2C_OWNADDRESS2_MASK03 I2C_OAR2_OA2MASK03 /*!< Only Address2 bits[7:4] are compared. */
-#define LL_I2C_OWNADDRESS2_MASK04 I2C_OAR2_OA2MASK04 /*!< Only Address2 bits[7:5] are compared. */
-#define LL_I2C_OWNADDRESS2_MASK05 I2C_OAR2_OA2MASK05 /*!< Only Address2 bits[7:6] are compared. */
-#define LL_I2C_OWNADDRESS2_MASK06 I2C_OAR2_OA2MASK06 /*!< Only Address2 bits[7] are compared. */
-#define LL_I2C_OWNADDRESS2_MASK07 I2C_OAR2_OA2MASK07 /*!< No comparison is done. All Address2 are acknowledged.*/
+#define LL_I2C_OWNADDRESS2_NOMASK I2C_OAR2_OA2NOMASK /*!< Own Address2 No mask. */
+#define LL_I2C_OWNADDRESS2_MASK01 I2C_OAR2_OA2MASK01 /*!< Only Address2 bits[7:2] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK02 I2C_OAR2_OA2MASK02 /*!< Only Address2 bits[7:3] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK03 I2C_OAR2_OA2MASK03 /*!< Only Address2 bits[7:4] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK04 I2C_OAR2_OA2MASK04 /*!< Only Address2 bits[7:5] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK05 I2C_OAR2_OA2MASK05 /*!< Only Address2 bits[7:6] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK06 I2C_OAR2_OA2MASK06 /*!< Only Address2 bits[7] are compared. */
+#define LL_I2C_OWNADDRESS2_MASK07 I2C_OAR2_OA2MASK07 /*!< No comparison is done.
+ All Address2 are acknowledged. */
/**
* @}
*/
@@ -250,14 +260,21 @@
/** @defgroup I2C_LL_EC_MODE Transfer End Mode
* @{
*/
-#define LL_I2C_MODE_RELOAD I2C_CR2_RELOAD /*!< Enable I2C Reload mode. */
-#define LL_I2C_MODE_AUTOEND I2C_CR2_AUTOEND /*!< Enable I2C Automatic end mode with no HW PEC comparison. */
-#define LL_I2C_MODE_SOFTEND 0x00000000U /*!< Enable I2C Software end mode with no HW PEC comparison. */
-#define LL_I2C_MODE_SMBUS_RELOAD LL_I2C_MODE_RELOAD /*!< Enable SMBUS Automatic end mode with HW PEC comparison. */
-#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC LL_I2C_MODE_AUTOEND /*!< Enable SMBUS Automatic end mode with HW PEC comparison. */
-#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC LL_I2C_MODE_SOFTEND /*!< Enable SMBUS Software end mode with HW PEC comparison. */
-#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE) /*!< Enable SMBUS Automatic end mode with HW PEC comparison. */
-#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE) /*!< Enable SMBUS Software end mode with HW PEC comparison. */
+#define LL_I2C_MODE_RELOAD I2C_CR2_RELOAD /*!< Enable I2C Reload mode. */
+#define LL_I2C_MODE_AUTOEND I2C_CR2_AUTOEND /*!< Enable I2C Automatic end mode
+ with no HW PEC comparison. */
+#define LL_I2C_MODE_SOFTEND 0x00000000U /*!< Enable I2C Software end mode
+ with no HW PEC comparison. */
+#define LL_I2C_MODE_SMBUS_RELOAD LL_I2C_MODE_RELOAD /*!< Enable SMBUS Automatic end mode
+ with HW PEC comparison. */
+#define LL_I2C_MODE_SMBUS_AUTOEND_NO_PEC LL_I2C_MODE_AUTOEND /*!< Enable SMBUS Automatic end mode
+ with HW PEC comparison. */
+#define LL_I2C_MODE_SMBUS_SOFTEND_NO_PEC LL_I2C_MODE_SOFTEND /*!< Enable SMBUS Software end mode
+ with HW PEC comparison. */
+#define LL_I2C_MODE_SMBUS_AUTOEND_WITH_PEC (uint32_t)(LL_I2C_MODE_AUTOEND | I2C_CR2_PECBYTE)
+/*!< Enable SMBUS Automatic end mode with HW PEC comparison. */
+#define LL_I2C_MODE_SMBUS_SOFTEND_WITH_PEC (uint32_t)(LL_I2C_MODE_SOFTEND | I2C_CR2_PECBYTE)
+/*!< Enable SMBUS Software end mode with HW PEC comparison. */
/**
* @}
*/
@@ -265,14 +282,23 @@
/** @defgroup I2C_LL_EC_GENERATE Start And Stop Generation
* @{
*/
-#define LL_I2C_GENERATE_NOSTARTSTOP 0x00000000U /*!< Don't Generate Stop and Start condition. */
-#define LL_I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP) /*!< Generate Stop condition (Size should be set to 0). */
-#define LL_I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) /*!< Generate Start for read request. */
-#define LL_I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) /*!< Generate Start for write request. */
-#define LL_I2C_GENERATE_RESTART_7BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN) /*!< Generate Restart for read request, slave 7Bit address. */
-#define LL_I2C_GENERATE_RESTART_7BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) /*!< Generate Restart for write request, slave 7Bit address. */
-#define LL_I2C_GENERATE_RESTART_10BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN | I2C_CR2_HEAD10R) /*!< Generate Restart for read request, slave 10Bit address. */
-#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START) /*!< Generate Restart for write request, slave 10Bit address.*/
+#define LL_I2C_GENERATE_NOSTARTSTOP 0x00000000U
+/*!< Don't Generate Stop and Start condition. */
+#define LL_I2C_GENERATE_STOP (uint32_t)(0x80000000U | I2C_CR2_STOP)
+/*!< Generate Stop condition (Size should be set to 0). */
+#define LL_I2C_GENERATE_START_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
+/*!< Generate Start for read request. */
+#define LL_I2C_GENERATE_START_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
+/*!< Generate Start for write request. */
+#define LL_I2C_GENERATE_RESTART_7BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
+/*!< Generate Restart for read request, slave 7Bit address. */
+#define LL_I2C_GENERATE_RESTART_7BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
+/*!< Generate Restart for write request, slave 7Bit address. */
+#define LL_I2C_GENERATE_RESTART_10BIT_READ (uint32_t)(0x80000000U | I2C_CR2_START | \
+ I2C_CR2_RD_WRN | I2C_CR2_HEAD10R)
+/*!< Generate Restart for read request, slave 10Bit address. */
+#define LL_I2C_GENERATE_RESTART_10BIT_WRITE (uint32_t)(0x80000000U | I2C_CR2_START)
+/*!< Generate Restart for write request, slave 10Bit address.*/
/**
* @}
*/
@@ -280,8 +306,10 @@
/** @defgroup I2C_LL_EC_DIRECTION Read Write Direction
* @{
*/
-#define LL_I2C_DIRECTION_WRITE 0x00000000U /*!< Write transfer request by master, slave enters receiver mode. */
-#define LL_I2C_DIRECTION_READ I2C_ISR_DIR /*!< Read transfer request by master, slave enters transmitter mode.*/
+#define LL_I2C_DIRECTION_WRITE 0x00000000U /*!< Write transfer request by master,
+ slave enters receiver mode. */
+#define LL_I2C_DIRECTION_READ I2C_ISR_DIR /*!< Read transfer request by master,
+ slave enters transmitter mode.*/
/**
* @}
*/
@@ -289,8 +317,10 @@
/** @defgroup I2C_LL_EC_DMA_REG_DATA DMA Register Data
* @{
*/
-#define LL_I2C_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */
-#define LL_I2C_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */
+#define LL_I2C_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for
+ transmission */
+#define LL_I2C_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for
+ reception */
/**
* @}
*/
@@ -298,8 +328,10 @@
/** @defgroup I2C_LL_EC_SMBUS_TIMEOUTA_MODE SMBus TimeoutA Mode SCL SDA Timeout
* @{
*/
-#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW 0x00000000U /*!< TimeoutA is used to detect SCL low level timeout. */
-#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE /*!< TimeoutA is used to detect both SCL and SDA high level timeout.*/
+#define LL_I2C_SMBUS_TIMEOUTA_MODE_SCL_LOW 0x00000000U /*!< TimeoutA is used to detect
+ SCL low level timeout. */
+#define LL_I2C_SMBUS_TIMEOUTA_MODE_SDA_SCL_HIGH I2C_TIMEOUTR_TIDLE /*!< TimeoutA is used to detect
+ both SCL and SDA high level timeout.*/
/**
* @}
*/
@@ -307,9 +339,12 @@
/** @defgroup I2C_LL_EC_SMBUS_TIMEOUT_SELECTION SMBus Timeout Selection
* @{
*/
-#define LL_I2C_SMBUS_TIMEOUTA I2C_TIMEOUTR_TIMOUTEN /*!< TimeoutA enable bit */
-#define LL_I2C_SMBUS_TIMEOUTB I2C_TIMEOUTR_TEXTEN /*!< TimeoutB (extended clock) enable bit */
-#define LL_I2C_SMBUS_ALL_TIMEOUT (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB (extended clock) enable bits */
+#define LL_I2C_SMBUS_TIMEOUTA I2C_TIMEOUTR_TIMOUTEN /*!< TimeoutA enable bit */
+#define LL_I2C_SMBUS_TIMEOUTB I2C_TIMEOUTR_TEXTEN /*!< TimeoutB (extended clock)
+ enable bit */
+#define LL_I2C_SMBUS_ALL_TIMEOUT (uint32_t)(I2C_TIMEOUTR_TIMOUTEN | \
+ I2C_TIMEOUTR_TEXTEN) /*!< TimeoutA and TimeoutB
+(extended clock) enable bits */
/**
* @}
*/
@@ -353,18 +388,22 @@
/**
* @brief Configure the SDA setup, hold time and the SCL high, low period.
* @param __PRESCALER__ This parameter must be a value between Min_Data=0 and Max_Data=0xF.
- * @param __DATA_SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. (tscldel = (SCLDEL+1)xtpresc)
- * @param __DATA_HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF. (tsdadel = SDADELxtpresc)
- * @param __CLOCK_HIGH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. (tsclh = (SCLH+1)xtpresc)
- * @param __CLOCK_LOW_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF. (tscll = (SCLL+1)xtpresc)
+ * @param __SETUP_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF.
+ (tscldel = (SCLDEL+1)xtpresc)
+ * @param __HOLD_TIME__ This parameter must be a value between Min_Data=0 and Max_Data=0xF.
+ (tsdadel = SDADELxtpresc)
+ * @param __SCLH_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF.
+ (tsclh = (SCLH+1)xtpresc)
+ * @param __SCLL_PERIOD__ This parameter must be a value between Min_Data=0 and Max_Data=0xFF.
+ (tscll = (SCLL+1)xtpresc)
* @retval Value between Min_Data=0 and Max_Data=0xFFFFFFFF
*/
-#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __DATA_SETUP_TIME__, __DATA_HOLD_TIME__, __CLOCK_HIGH_PERIOD__, __CLOCK_LOW_PERIOD__) \
- ((((uint32_t)(__PRESCALER__) << I2C_TIMINGR_PRESC_Pos) & I2C_TIMINGR_PRESC) | \
- (((uint32_t)(__DATA_SETUP_TIME__) << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL) | \
- (((uint32_t)(__DATA_HOLD_TIME__) << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL) | \
- (((uint32_t)(__CLOCK_HIGH_PERIOD__) << I2C_TIMINGR_SCLH_Pos) & I2C_TIMINGR_SCLH) | \
- (((uint32_t)(__CLOCK_LOW_PERIOD__) << I2C_TIMINGR_SCLL_Pos) & I2C_TIMINGR_SCLL))
+#define __LL_I2C_CONVERT_TIMINGS(__PRESCALER__, __SETUP_TIME__, __HOLD_TIME__, __SCLH_PERIOD__, __SCLL_PERIOD__) \
+ ((((uint32_t)(__PRESCALER__) << I2C_TIMINGR_PRESC_Pos) & I2C_TIMINGR_PRESC) | \
+ (((uint32_t)(__SETUP_TIME__) << I2C_TIMINGR_SCLDEL_Pos) & I2C_TIMINGR_SCLDEL) | \
+ (((uint32_t)(__HOLD_TIME__) << I2C_TIMINGR_SDADEL_Pos) & I2C_TIMINGR_SDADEL) | \
+ (((uint32_t)(__SCLH_PERIOD__) << I2C_TIMINGR_SCLH_Pos) & I2C_TIMINGR_SCLH) | \
+ (((uint32_t)(__SCLL_PERIOD__) << I2C_TIMINGR_SCLL_Pos) & I2C_TIMINGR_SCLL))
/**
* @}
*/
@@ -428,7 +467,8 @@
* @param AnalogFilter This parameter can be one of the following values:
* @arg @ref LL_I2C_ANALOGFILTER_ENABLE
* @arg @ref LL_I2C_ANALOGFILTER_DISABLE
- * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk).
+ * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled)
+ and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk).
* This parameter is used to configure the digital noise filter on SDA and SCL input.
* The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk.
* @retval None
@@ -444,7 +484,8 @@
* This filter can only be programmed when the I2C is disabled (PE = 0).
* @rmtoll CR1 DNF LL_I2C_SetDigitalFilter
* @param I2Cx I2C Instance.
- * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled) and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk).
+ * @param DigitalFilter This parameter must be a value between Min_Data=0x00 (Digital filter disabled)
+ and Max_Data=0x0F (Digital filter enabled and filtering capability up to 15*ti2cclk).
* This parameter is used to configure the digital noise filter on SDA and SCL input.
* The digital filter will filter spikes with a length of up to DNF[3:0]*ti2cclk.
* @retval None
@@ -583,12 +624,12 @@
if (Direction == LL_I2C_DMA_REG_DATA_TRANSMIT)
{
/* return address of TXDR register */
- data_reg_addr = (uint32_t) & (I2Cx->TXDR);
+ data_reg_addr = (uint32_t) &(I2Cx->TXDR);
}
else
{
/* return address of RXDR register */
- data_reg_addr = (uint32_t) & (I2Cx->RXDR);
+ data_reg_addr = (uint32_t) &(I2Cx->RXDR);
}
return data_reg_addr;
@@ -664,7 +705,7 @@
/**
* @brief Enable Wakeup from STOP.
- * @note Macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
* WakeUpFromStop feature is supported by the I2Cx Instance.
* @note This bit can only be programmed when Digital Filter is disabled.
* @rmtoll CR1 WUPEN LL_I2C_EnableWakeUpFromStop
@@ -678,7 +719,7 @@
/**
* @brief Disable Wakeup from STOP.
- * @note Macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
* WakeUpFromStop feature is supported by the I2Cx Instance.
* @rmtoll CR1 WUPEN LL_I2C_DisableWakeUpFromStop
* @param I2Cx I2C Instance.
@@ -691,7 +732,7 @@
/**
* @brief Check if Wakeup from STOP is enabled or disabled.
- * @note Macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_I2C_WAKEUP_FROMSTOP_INSTANCE(I2Cx) can be used to check whether or not
* WakeUpFromStop feature is supported by the I2Cx Instance.
* @rmtoll CR1 WUPEN LL_I2C_IsEnabledWakeUpFromStop
* @param I2Cx I2C Instance.
@@ -941,7 +982,7 @@
/**
* @brief Configure peripheral mode.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll CR1 SMBHEN LL_I2C_SetMode\n
* CR1 SMBDEN LL_I2C_SetMode
@@ -960,7 +1001,7 @@
/**
* @brief Get peripheral mode.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll CR1 SMBHEN LL_I2C_GetMode\n
* CR1 SMBDEN LL_I2C_GetMode
@@ -978,7 +1019,7 @@
/**
* @brief Enable SMBus alert (Host or Device mode)
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @note SMBus Device mode:
* - SMBus Alert pin is drived low and
@@ -996,7 +1037,7 @@
/**
* @brief Disable SMBus alert (Host or Device mode)
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @note SMBus Device mode:
* - SMBus Alert pin is not drived (can be used as a standard GPIO) and
@@ -1014,7 +1055,7 @@
/**
* @brief Check if SMBus alert (Host or Device mode) is enabled or disabled.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll CR1 ALERTEN LL_I2C_IsEnabledSMBusAlert
* @param I2Cx I2C Instance.
@@ -1027,7 +1068,7 @@
/**
* @brief Enable SMBus Packet Error Calculation (PEC).
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll CR1 PECEN LL_I2C_EnableSMBusPEC
* @param I2Cx I2C Instance.
@@ -1040,7 +1081,7 @@
/**
* @brief Disable SMBus Packet Error Calculation (PEC).
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll CR1 PECEN LL_I2C_DisableSMBusPEC
* @param I2Cx I2C Instance.
@@ -1053,7 +1094,7 @@
/**
* @brief Check if SMBus Packet Error Calculation (PEC) is enabled or disabled.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll CR1 PECEN LL_I2C_IsEnabledSMBusPEC
* @param I2Cx I2C Instance.
@@ -1066,7 +1107,7 @@
/**
* @brief Configure the SMBus Clock Timeout.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @note This configuration can only be programmed when associated Timeout is disabled (TimeoutA and/orTimeoutB).
* @rmtoll TIMEOUTR TIMEOUTA LL_I2C_ConfigSMBusTimeout\n
@@ -1089,7 +1130,7 @@
/**
* @brief Configure the SMBus Clock TimeoutA (SCL low timeout or SCL and SDA high timeout depends on TimeoutA mode).
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @note These bits can only be programmed when TimeoutA is disabled.
* @rmtoll TIMEOUTR TIMEOUTA LL_I2C_SetSMBusTimeoutA
@@ -1104,7 +1145,7 @@
/**
* @brief Get the SMBus Clock TimeoutA setting.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll TIMEOUTR TIMEOUTA LL_I2C_GetSMBusTimeoutA
* @param I2Cx I2C Instance.
@@ -1117,7 +1158,7 @@
/**
* @brief Set the SMBus Clock TimeoutA mode.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @note This bit can only be programmed when TimeoutA is disabled.
* @rmtoll TIMEOUTR TIDLE LL_I2C_SetSMBusTimeoutAMode
@@ -1134,7 +1175,7 @@
/**
* @brief Get the SMBus Clock TimeoutA mode.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll TIMEOUTR TIDLE LL_I2C_GetSMBusTimeoutAMode
* @param I2Cx I2C Instance.
@@ -1149,7 +1190,7 @@
/**
* @brief Configure the SMBus Extended Cumulative Clock TimeoutB (Master or Slave mode).
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @note These bits can only be programmed when TimeoutB is disabled.
* @rmtoll TIMEOUTR TIMEOUTB LL_I2C_SetSMBusTimeoutB
@@ -1164,7 +1205,7 @@
/**
* @brief Get the SMBus Extended Cumulative Clock TimeoutB setting.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll TIMEOUTR TIMEOUTB LL_I2C_GetSMBusTimeoutB
* @param I2Cx I2C Instance.
@@ -1177,7 +1218,7 @@
/**
* @brief Enable the SMBus Clock Timeout.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll TIMEOUTR TIMOUTEN LL_I2C_EnableSMBusTimeout\n
* TIMEOUTR TEXTEN LL_I2C_EnableSMBusTimeout
@@ -1195,7 +1236,7 @@
/**
* @brief Disable the SMBus Clock Timeout.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll TIMEOUTR TIMOUTEN LL_I2C_DisableSMBusTimeout\n
* TIMEOUTR TEXTEN LL_I2C_DisableSMBusTimeout
@@ -1213,7 +1254,7 @@
/**
* @brief Check if the SMBus Clock Timeout is enabled or disabled.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll TIMEOUTR TIMOUTEN LL_I2C_IsEnabledSMBusTimeout\n
* TIMEOUTR TEXTEN LL_I2C_IsEnabledSMBusTimeout
@@ -1226,7 +1267,8 @@
*/
__STATIC_INLINE uint32_t LL_I2C_IsEnabledSMBusTimeout(I2C_TypeDef *I2Cx, uint32_t ClockTimeout)
{
- return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == (ClockTimeout)) ? 1UL : 0UL);
+ return ((READ_BIT(I2Cx->TIMEOUTR, (I2C_TIMEOUTR_TIMOUTEN | I2C_TIMEOUTR_TEXTEN)) == \
+ (ClockTimeout)) ? 1UL : 0UL);
}
/**
@@ -1443,7 +1485,7 @@
/**
* @brief Enable Error interrupts.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @note Any of these errors will generate interrupt :
* Arbitration Loss (ARLO)
@@ -1463,7 +1505,7 @@
/**
* @brief Disable Error interrupts.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @note Any of these errors will generate interrupt :
* Arbitration Loss (ARLO)
@@ -1645,7 +1687,7 @@
/**
* @brief Indicate the status of SMBus PEC error flag in reception.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @note RESET: Clear default value.
* SET: When the received PEC does not match with the PEC register content.
@@ -1660,7 +1702,7 @@
/**
* @brief Indicate the status of SMBus Timeout detection flag.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @note RESET: Clear default value.
* SET: When a timeout or extended clock timeout occurs.
@@ -1675,7 +1717,7 @@
/**
* @brief Indicate the status of SMBus alert flag.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @note RESET: Clear default value.
* SET: When SMBus host configuration, SMBus alert enabled and
@@ -1782,7 +1824,7 @@
/**
* @brief Clear SMBus PEC error flag.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll ICR PECCF LL_I2C_ClearSMBusFlag_PECERR
* @param I2Cx I2C Instance.
@@ -1795,7 +1837,7 @@
/**
* @brief Clear SMBus Timeout detection flag.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll ICR TIMOUTCF LL_I2C_ClearSMBusFlag_TIMEOUT
* @param I2Cx I2C Instance.
@@ -1808,7 +1850,7 @@
/**
* @brief Clear SMBus Alert flag.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll ICR ALERTCF LL_I2C_ClearSMBusFlag_ALERT
* @param I2Cx I2C Instance.
@@ -1923,7 +1965,8 @@
}
/**
- * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code or next received byte.
+ * @brief Prepare the generation of a ACKnowledge or Non ACKnowledge condition after the address receive match code
+ or next received byte.
* @note Usage in Slave mode only.
* @rmtoll CR2 NACK LL_I2C_AcknowledgeNextData
* @param I2Cx I2C Instance.
@@ -1964,7 +2007,8 @@
/**
* @brief Enable automatic RESTART Read request condition for 10bit address header (master mode).
* @note The master sends the complete 10bit slave address read sequence :
- * Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address in Read direction.
+ * Start + 2 bytes 10bit address in Write direction + Restart + first 7 bits of 10bit address
+ in Read direction.
* @rmtoll CR2 HEAD10R LL_I2C_EnableAuto10BitRead
* @param I2Cx I2C Instance.
* @retval None
@@ -2090,7 +2134,9 @@
__STATIC_INLINE void LL_I2C_HandleTransfer(I2C_TypeDef *I2Cx, uint32_t SlaveAddr, uint32_t SlaveAddrSize,
uint32_t TransferSize, uint32_t EndMode, uint32_t Request)
{
- MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD | I2C_CR2_ADD10 | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_RELOAD |
+ MODIFY_REG(I2Cx->CR2, I2C_CR2_SADD | I2C_CR2_ADD10 |
+ (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) |
+ I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_RELOAD |
I2C_CR2_NBYTES | I2C_CR2_AUTOEND | I2C_CR2_HEAD10R,
SlaveAddr | SlaveAddrSize | (TransferSize << I2C_CR2_NBYTES_Pos) | EndMode | Request);
}
@@ -2123,9 +2169,10 @@
/**
* @brief Enable internal comparison of the SMBus Packet Error byte (transmission or reception mode).
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
- * @note This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition or an Address Matched is received.
+ * @note This feature is cleared by hardware when the PEC byte is transferred, or when a STOP condition
+ or an Address Matched is received.
* This bit has no effect when RELOAD bit is set.
* This bit has no effect in device mode when SBC bit is not set.
* @rmtoll CR2 PECBYTE LL_I2C_EnableSMBusPECCompare
@@ -2139,7 +2186,7 @@
/**
* @brief Check if the SMBus Packet Error byte internal comparison is requested or not.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll CR2 PECBYTE LL_I2C_IsEnabledSMBusPECCompare
* @param I2Cx I2C Instance.
@@ -2152,12 +2199,12 @@
/**
* @brief Get the SMBus Packet Error byte calculated.
- * @note Macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
+ * @note The macro IS_SMBUS_ALL_INSTANCE(I2Cx) can be used to check whether or not
* SMBus feature is supported by the I2Cx Instance.
* @rmtoll PECR PEC LL_I2C_GetSMBusPEC
* @param I2Cx I2C Instance.
* @retval Value between Min_Data=0x00 and Max_Data=0xFF
-*/
+ */
__STATIC_INLINE uint32_t LL_I2C_GetSMBusPEC(I2C_TypeDef *I2Cx)
{
return (uint32_t)(READ_BIT(I2Cx->PECR, I2C_PECR_PEC));
diff --git a/Inc/stm32g0xx_ll_iwdg.h b/Inc/stm32g0xx_ll_iwdg.h
index a4757d2..77d0ba6 100644
--- a/Inc/stm32g0xx_ll_iwdg.h
+++ b/Inc/stm32g0xx_ll_iwdg.h
@@ -304,8 +304,8 @@
/**
* @brief Check if all flags Prescaler, Reload & Window Value Update are reset or not
* @rmtoll SR PVU LL_IWDG_IsReady\n
- * SR WVU LL_IWDG_IsReady\n
- * SR RVU LL_IWDG_IsReady
+ * SR RVU LL_IWDG_IsReady\n
+ * SR WVU LL_IWDG_IsReady
* @param IWDGx IWDG Instance
* @retval State of bits (1 or 0).
*/
@@ -318,7 +318,6 @@
* @}
*/
-
/**
* @}
*/
diff --git a/Inc/stm32g0xx_ll_lptim.h b/Inc/stm32g0xx_ll_lptim.h
index be278f3..8ea8655 100644
--- a/Inc/stm32g0xx_ll_lptim.h
+++ b/Inc/stm32g0xx_ll_lptim.h
@@ -67,22 +67,26 @@
uint32_t ClockSource; /*!< Specifies the source of the clock used by the LPTIM instance.
This parameter can be a value of @ref LPTIM_LL_EC_CLK_SOURCE.
- This feature can be modified afterwards using unitary function @ref LL_LPTIM_SetClockSource().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_LPTIM_SetClockSource().*/
uint32_t Prescaler; /*!< Specifies the prescaler division ratio.
This parameter can be a value of @ref LPTIM_LL_EC_PRESCALER.
- This feature can be modified afterwards using using unitary function @ref LL_LPTIM_SetPrescaler().*/
+ This feature can be modified afterwards using using unitary
+ function @ref LL_LPTIM_SetPrescaler().*/
uint32_t Waveform; /*!< Specifies the waveform shape.
This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_WAVEFORM.
- This feature can be modified afterwards using unitary function @ref LL_LPTIM_ConfigOutput().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_LPTIM_ConfigOutput().*/
uint32_t Polarity; /*!< Specifies waveform polarity.
This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_POLARITY.
- This feature can be modified afterwards using unitary function @ref LL_LPTIM_ConfigOutput().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_LPTIM_ConfigOutput().*/
} LL_LPTIM_InitTypeDef;
/**
@@ -100,9 +104,9 @@
* @{
*/
#define LL_LPTIM_ISR_CMPM LPTIM_ISR_CMPM /*!< Compare match */
+#define LL_LPTIM_ISR_CMPOK LPTIM_ISR_CMPOK /*!< Compare register update OK */
#define LL_LPTIM_ISR_ARRM LPTIM_ISR_ARRM /*!< Autoreload match */
#define LL_LPTIM_ISR_EXTTRIG LPTIM_ISR_EXTTRIG /*!< External trigger edge event */
-#define LL_LPTIM_ISR_CMPOK LPTIM_ISR_CMPOK /*!< Compare register update OK */
#define LL_LPTIM_ISR_ARROK LPTIM_ISR_ARROK /*!< Autoreload register update OK */
#define LL_LPTIM_ISR_UP LPTIM_ISR_UP /*!< Counter direction change down to up */
#define LL_LPTIM_ISR_DOWN LPTIM_ISR_DOWN /*!< Counter direction change up to down */
@@ -114,13 +118,13 @@
* @brief IT defines which can be used with LL_LPTIM_ReadReg and LL_LPTIM_WriteReg functions
* @{
*/
-#define LL_LPTIM_IER_CMPMIE LPTIM_IER_CMPMIE /*!< Compare match Interrupt Enable */
-#define LL_LPTIM_IER_ARRMIE LPTIM_IER_ARRMIE /*!< Autoreload match Interrupt Enable */
-#define LL_LPTIM_IER_EXTTRIGIE LPTIM_IER_EXTTRIGIE /*!< External trigger valid edge Interrupt Enable */
-#define LL_LPTIM_IER_CMPOKIE LPTIM_IER_CMPOKIE /*!< Compare register update OK Interrupt Enable */
-#define LL_LPTIM_IER_ARROKIE LPTIM_IER_ARROKIE /*!< Autoreload register update OK Interrupt Enable */
-#define LL_LPTIM_IER_UPIE LPTIM_IER_UPIE /*!< Direction change to UP Interrupt Enable */
-#define LL_LPTIM_IER_DOWNIE LPTIM_IER_DOWNIE /*!< Direction change to down Interrupt Enable */
+#define LL_LPTIM_IER_CMPMIE LPTIM_IER_CMPMIE /*!< Compare match */
+#define LL_LPTIM_IER_CMPOKIE LPTIM_IER_CMPOKIE /*!< Compare register update OK */
+#define LL_LPTIM_IER_ARRMIE LPTIM_IER_ARRMIE /*!< Autoreload match */
+#define LL_LPTIM_IER_EXTTRIGIE LPTIM_IER_EXTTRIGIE /*!< External trigger edge event */
+#define LL_LPTIM_IER_ARROKIE LPTIM_IER_ARROKIE /*!< Autoreload register update OK */
+#define LL_LPTIM_IER_UPIE LPTIM_IER_UPIE /*!< Counter direction change down to up */
+#define LL_LPTIM_IER_DOWNIE LPTIM_IER_DOWNIE /*!< Counter direction change up to down */
/**
* @}
*/
@@ -904,7 +908,8 @@
}
/**
- * @brief Configure the active edge or edges used by the counter when the LPTIM is clocked by an external clock source.
+ * @brief Configure the active edge or edges used by the counter when
+ the LPTIM is clocked by an external clock source.
* @note This function must be called when the LPTIM instance is disabled.
* @note When both external clock signal edges are considered active ones,
* the LPTIM must also be clocked by an internal clock source with a
@@ -1122,7 +1127,8 @@
}
/**
- * @brief Informs application whether the APB bus write operation to the LPTIMx_CMP register has been successfully completed. If so, a new one can be initiated.
+ * @brief Informs application whether the APB bus write operation to the LPTIMx_CMP register has been successfully
+ completed. If so, a new one can be initiated.
* @rmtoll ISR CMPOK LL_LPTIM_IsActiveFlag_CMPOK
* @param LPTIMx Low-Power Timer instance
* @retval State of bit (1 or 0).
@@ -1144,7 +1150,8 @@
}
/**
- * @brief Informs application whether the APB bus write operation to the LPTIMx_ARR register has been successfully completed. If so, a new one can be initiated.
+ * @brief Informs application whether the APB bus write operation to the LPTIMx_ARR register has been successfully
+ completed. If so, a new one can be initiated.
* @rmtoll ISR ARROK LL_LPTIM_IsActiveFlag_ARROK
* @param LPTIMx Low-Power Timer instance
* @retval State of bit (1 or 0).
@@ -1166,7 +1173,8 @@
}
/**
- * @brief Informs the application whether the counter direction has changed from down to up (when the LPTIM instance operates in encoder mode).
+ * @brief Informs the application whether the counter direction has changed from down to up (when the LPTIM instance
+ operates in encoder mode).
* @rmtoll ISR UP LL_LPTIM_IsActiveFlag_UP
* @param LPTIMx Low-Power Timer instance
* @retval State of bit (1 or 0).
@@ -1188,7 +1196,8 @@
}
/**
- * @brief Informs the application whether the counter direction has changed from up to down (when the LPTIM instance operates in encoder mode).
+ * @brief Informs the application whether the counter direction has changed from up to down (when the LPTIM instance
+ operates in encoder mode).
* @rmtoll ISR DOWN LL_LPTIM_IsActiveFlag_DOWN
* @param LPTIMx Low-Power Timer instance
* @retval State of bit (1 or 0).
@@ -1340,7 +1349,7 @@
/**
* @brief Enable autoreload register write completed interrupt (ARROKIE).
- * @rmtoll IER ARROKIE LL_LPTIM_EnableIT_ARROK
+ * @rmtoll IER ARROKIE LL_LPTIM_EnableIT_ARROK
* @param LPTIMx Low-Power Timer instance
* @retval None
*/
@@ -1351,7 +1360,7 @@
/**
* @brief Disable autoreload register write completed interrupt (ARROKIE).
- * @rmtoll IER ARROKIE LL_LPTIM_DisableIT_ARROK
+ * @rmtoll IER ARROKIE LL_LPTIM_DisableIT_ARROK
* @param LPTIMx Low-Power Timer instance
* @retval None
*/
@@ -1362,7 +1371,7 @@
/**
* @brief Indicates whether the autoreload register write completed interrupt (ARROKIE) is enabled.
- * @rmtoll IER ARROKIE LL_LPTIM_IsEnabledIT_ARROK
+ * @rmtoll IER ARROKIE LL_LPTIM_IsEnabledIT_ARROK
* @param LPTIMx Low-Power Timer instance
* @retval State of bit(1 or 0).
*/
@@ -1373,7 +1382,7 @@
/**
* @brief Enable direction change to up interrupt (UPIE).
- * @rmtoll IER UPIE LL_LPTIM_EnableIT_UP
+ * @rmtoll IER UPIE LL_LPTIM_EnableIT_UP
* @param LPTIMx Low-Power Timer instance
* @retval None
*/
@@ -1384,7 +1393,7 @@
/**
* @brief Disable direction change to up interrupt (UPIE).
- * @rmtoll IER UPIE LL_LPTIM_DisableIT_UP
+ * @rmtoll IER UPIE LL_LPTIM_DisableIT_UP
* @param LPTIMx Low-Power Timer instance
* @retval None
*/
@@ -1395,7 +1404,7 @@
/**
* @brief Indicates whether the direction change to up interrupt (UPIE) is enabled.
- * @rmtoll IER UPIE LL_LPTIM_IsEnabledIT_UP
+ * @rmtoll IER UPIE LL_LPTIM_IsEnabledIT_UP
* @param LPTIMx Low-Power Timer instance
* @retval State of bit(1 or 0).
*/
@@ -1406,7 +1415,7 @@
/**
* @brief Enable direction change to down interrupt (DOWNIE).
- * @rmtoll IER DOWNIE LL_LPTIM_EnableIT_DOWN
+ * @rmtoll IER DOWNIE LL_LPTIM_EnableIT_DOWN
* @param LPTIMx Low-Power Timer instance
* @retval None
*/
@@ -1417,7 +1426,7 @@
/**
* @brief Disable direction change to down interrupt (DOWNIE).
- * @rmtoll IER DOWNIE LL_LPTIM_DisableIT_DOWN
+ * @rmtoll IER DOWNIE LL_LPTIM_DisableIT_DOWN
* @param LPTIMx Low-Power Timer instance
* @retval None
*/
@@ -1428,7 +1437,7 @@
/**
* @brief Indicates whether the direction change to down interrupt (DOWNIE) is enabled.
- * @rmtoll IER DOWNIE LL_LPTIM_IsEnabledIT_DOWN
+ * @rmtoll IER DOWNIE LL_LPTIM_IsEnabledIT_DOWN
* @param LPTIMx Low-Power Timer instance
* @retval State of bit(1 or 0).
*/
diff --git a/Inc/stm32g0xx_ll_lpuart.h b/Inc/stm32g0xx_ll_lpuart.h
index 7f00f82..cb0bb23 100644
--- a/Inc/stm32g0xx_ll_lpuart.h
+++ b/Inc/stm32g0xx_ll_lpuart.h
@@ -154,16 +154,16 @@
* @brief Flags defines which can be used with LL_LPUART_WriteReg function
* @{
*/
-#define LL_LPUART_ICR_PECF USART_ICR_PECF /*!< Parity error flag */
-#define LL_LPUART_ICR_FECF USART_ICR_FECF /*!< Framing error flag */
-#define LL_LPUART_ICR_NCF USART_ICR_NECF /*!< Noise error detected flag */
-#define LL_LPUART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error flag */
-#define LL_LPUART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected flag */
-#define LL_LPUART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty Clear flag */
-#define LL_LPUART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete flag */
-#define LL_LPUART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS flag */
-#define LL_LPUART_ICR_CMCF USART_ICR_CMCF /*!< Character match flag */
-#define LL_LPUART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode flag */
+#define LL_LPUART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */
+#define LL_LPUART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */
+#define LL_LPUART_ICR_NCF USART_ICR_NECF /*!< Noise error detected clear flag */
+#define LL_LPUART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */
+#define LL_LPUART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */
+#define LL_LPUART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty clear flag */
+#define LL_LPUART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */
+#define LL_LPUART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */
+#define LL_LPUART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */
+#define LL_LPUART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */
/**
* @}
*/
@@ -172,27 +172,27 @@
* @brief Flags defines which can be used with LL_LPUART_ReadReg function
* @{
*/
-#define LL_LPUART_ISR_PE USART_ISR_PE /*!< Parity error flag */
-#define LL_LPUART_ISR_FE USART_ISR_FE /*!< Framing error flag */
-#define LL_LPUART_ISR_NE USART_ISR_NE /*!< Noise detected flag */
-#define LL_LPUART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */
-#define LL_LPUART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */
-#define LL_LPUART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */
-#define LL_LPUART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */
-#define LL_LPUART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/
-#define LL_LPUART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */
-#define LL_LPUART_ISR_CTS USART_ISR_CTS /*!< CTS flag */
-#define LL_LPUART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */
-#define LL_LPUART_ISR_CMF USART_ISR_CMF /*!< Character match flag */
-#define LL_LPUART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */
-#define LL_LPUART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */
-#define LL_LPUART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */
-#define LL_LPUART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */
-#define LL_LPUART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */
-#define LL_LPUART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */
-#define LL_LPUART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */
-#define LL_LPUART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */
-#define LL_LPUART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */
+#define LL_LPUART_ISR_PE USART_ISR_PE /*!< Parity error flag */
+#define LL_LPUART_ISR_FE USART_ISR_FE /*!< Framing error flag */
+#define LL_LPUART_ISR_NE USART_ISR_NE /*!< Noise detected flag */
+#define LL_LPUART_ISR_ORE USART_ISR_ORE /*!< Overrun error flag */
+#define LL_LPUART_ISR_IDLE USART_ISR_IDLE /*!< Idle line detected flag */
+#define LL_LPUART_ISR_RXNE_RXFNE USART_ISR_RXNE_RXFNE /*!< Read data register or RX FIFO not empty flag */
+#define LL_LPUART_ISR_TC USART_ISR_TC /*!< Transmission complete flag */
+#define LL_LPUART_ISR_TXE_TXFNF USART_ISR_TXE_TXFNF /*!< Transmit data register empty or TX FIFO Not Full flag*/
+#define LL_LPUART_ISR_CTSIF USART_ISR_CTSIF /*!< CTS interrupt flag */
+#define LL_LPUART_ISR_CTS USART_ISR_CTS /*!< CTS flag */
+#define LL_LPUART_ISR_BUSY USART_ISR_BUSY /*!< Busy flag */
+#define LL_LPUART_ISR_CMF USART_ISR_CMF /*!< Character match flag */
+#define LL_LPUART_ISR_SBKF USART_ISR_SBKF /*!< Send break flag */
+#define LL_LPUART_ISR_RWU USART_ISR_RWU /*!< Receiver wakeup from Mute mode flag */
+#define LL_LPUART_ISR_WUF USART_ISR_WUF /*!< Wakeup from Stop mode flag */
+#define LL_LPUART_ISR_TEACK USART_ISR_TEACK /*!< Transmit enable acknowledge flag */
+#define LL_LPUART_ISR_REACK USART_ISR_REACK /*!< Receive enable acknowledge flag */
+#define LL_LPUART_ISR_TXFE USART_ISR_TXFE /*!< TX FIFO empty flag */
+#define LL_LPUART_ISR_RXFF USART_ISR_RXFF /*!< RX FIFO full flag */
+#define LL_LPUART_ISR_RXFT USART_ISR_RXFT /*!< RX FIFO threshold flag */
+#define LL_LPUART_ISR_TXFT USART_ISR_TXFT /*!< TX FIFO threshold flag */
/**
* @}
*/
@@ -201,19 +201,21 @@
* @brief IT defines which can be used with LL_LPUART_ReadReg and LL_LPUART_WriteReg functions
* @{
*/
-#define LL_LPUART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */
-#define LL_LPUART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty interrupt enable */
-#define LL_LPUART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */
-#define LL_LPUART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO not full interrupt enable */
-#define LL_LPUART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */
-#define LL_LPUART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */
-#define LL_LPUART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */
-#define LL_LPUART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */
-#define LL_LPUART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */
-#define LL_LPUART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */
-#define LL_LPUART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */
-#define LL_LPUART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */
-#define LL_LPUART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */
+#define LL_LPUART_CR1_IDLEIE USART_CR1_IDLEIE /*!< IDLE interrupt enable */
+#define LL_LPUART_CR1_RXNEIE_RXFNEIE USART_CR1_RXNEIE_RXFNEIE /*!< Read data register and RXFIFO not empty
+ interrupt enable */
+#define LL_LPUART_CR1_TCIE USART_CR1_TCIE /*!< Transmission complete interrupt enable */
+#define LL_LPUART_CR1_TXEIE_TXFNFIE USART_CR1_TXEIE_TXFNFIE /*!< Transmit data register empty and TX FIFO
+ not full interrupt enable */
+#define LL_LPUART_CR1_PEIE USART_CR1_PEIE /*!< Parity error */
+#define LL_LPUART_CR1_CMIE USART_CR1_CMIE /*!< Character match interrupt enable */
+#define LL_LPUART_CR1_TXFEIE USART_CR1_TXFEIE /*!< TX FIFO empty interrupt enable */
+#define LL_LPUART_CR1_RXFFIE USART_CR1_RXFFIE /*!< RX FIFO full interrupt enable */
+#define LL_LPUART_CR3_EIE USART_CR3_EIE /*!< Error interrupt enable */
+#define LL_LPUART_CR3_CTSIE USART_CR3_CTSIE /*!< CTS interrupt enable */
+#define LL_LPUART_CR3_WUFIE USART_CR3_WUFIE /*!< Wakeup from Stop mode interrupt enable */
+#define LL_LPUART_CR3_TXFTIE USART_CR3_TXFTIE /*!< TX FIFO threshold interrupt enable */
+#define LL_LPUART_CR3_RXFTIE USART_CR3_RXFTIE /*!< RX FIFO threshold interrupt enable */
/**
* @}
*/
@@ -234,10 +236,10 @@
/** @defgroup LPUART_LL_EC_DIRECTION Direction
* @{
*/
-#define LL_LPUART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */
-#define LL_LPUART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */
-#define LL_LPUART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */
-#define LL_LPUART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */
+#define LL_LPUART_DIRECTION_NONE 0x00000000U /*!< Transmitter and Receiver are disabled */
+#define LL_LPUART_DIRECTION_RX USART_CR1_RE /*!< Transmitter is disabled and Receiver is enabled */
+#define LL_LPUART_DIRECTION_TX USART_CR1_TE /*!< Transmitter is enabled and Receiver is disabled */
+#define LL_LPUART_DIRECTION_TX_RX (USART_CR1_TE |USART_CR1_RE) /*!< Transmitter and Receiver are enabled */
/**
* @}
*/
@@ -245,9 +247,9 @@
/** @defgroup LPUART_LL_EC_PARITY Parity Control
* @{
*/
-#define LL_LPUART_PARITY_NONE 0x00000000U /*!< Parity control disabled */
-#define LL_LPUART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */
-#define LL_LPUART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */
+#define LL_LPUART_PARITY_NONE 0x00000000U /*!< Parity control disabled */
+#define LL_LPUART_PARITY_EVEN USART_CR1_PCE /*!< Parity control enabled and Even Parity is selected */
+#define LL_LPUART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) /*!< Parity control enabled and Odd Parity is selected */
/**
* @}
*/
@@ -255,8 +257,8 @@
/** @defgroup LPUART_LL_EC_WAKEUP Wakeup
* @{
*/
-#define LL_LPUART_WAKEUP_IDLELINE 0x00000000U /*!< LPUART wake up from Mute mode on Idle Line */
-#define LL_LPUART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< LPUART wake up from Mute mode on Address Mark */
+#define LL_LPUART_WAKEUP_IDLELINE 0x00000000U /*!< LPUART wake up from Mute mode on Idle Line */
+#define LL_LPUART_WAKEUP_ADDRESSMARK USART_CR1_WAKE /*!< LPUART wake up from Mute mode on Address Mark */
/**
* @}
*/
@@ -264,9 +266,9 @@
/** @defgroup LPUART_LL_EC_DATAWIDTH Datawidth
* @{
*/
-#define LL_LPUART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */
-#define LL_LPUART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */
-#define LL_LPUART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */
+#define LL_LPUART_DATAWIDTH_7B USART_CR1_M1 /*!< 7 bits word length : Start bit, 7 data bits, n stop bits */
+#define LL_LPUART_DATAWIDTH_8B 0x00000000U /*!< 8 bits word length : Start bit, 8 data bits, n stop bits */
+#define LL_LPUART_DATAWIDTH_9B USART_CR1_M0 /*!< 9 bits word length : Start bit, 9 data bits, n stop bits */
/**
* @}
*/
@@ -274,18 +276,27 @@
/** @defgroup LPUART_LL_EC_PRESCALER Clock Source Prescaler
* @{
*/
-#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */
-#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */
-#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */
-#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */
-#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */
-#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */
-#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */
-#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */
-#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */
-#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */
-#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */
-#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 | USART_PRESC_PRESCALER_1 | USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */
+#define LL_LPUART_PRESCALER_DIV1 0x00000000U /*!< Input clock not divided */
+#define LL_LPUART_PRESCALER_DIV2 (USART_PRESC_PRESCALER_0) /*!< Input clock divided by 2 */
+#define LL_LPUART_PRESCALER_DIV4 (USART_PRESC_PRESCALER_1) /*!< Input clock divided by 4 */
+#define LL_LPUART_PRESCALER_DIV6 (USART_PRESC_PRESCALER_1 |\
+ USART_PRESC_PRESCALER_0) /*!< Input clock divided by 6 */
+#define LL_LPUART_PRESCALER_DIV8 (USART_PRESC_PRESCALER_2) /*!< Input clock divided by 8 */
+#define LL_LPUART_PRESCALER_DIV10 (USART_PRESC_PRESCALER_2 |\
+ USART_PRESC_PRESCALER_0) /*!< Input clock divided by 10 */
+#define LL_LPUART_PRESCALER_DIV12 (USART_PRESC_PRESCALER_2 |\
+ USART_PRESC_PRESCALER_1) /*!< Input clock divided by 12 */
+#define LL_LPUART_PRESCALER_DIV16 (USART_PRESC_PRESCALER_2 |\
+ USART_PRESC_PRESCALER_1 |\
+ USART_PRESC_PRESCALER_0) /*!< Input clock divided by 16 */
+#define LL_LPUART_PRESCALER_DIV32 (USART_PRESC_PRESCALER_3) /*!< Input clock divided by 32 */
+#define LL_LPUART_PRESCALER_DIV64 (USART_PRESC_PRESCALER_3 |\
+ USART_PRESC_PRESCALER_0) /*!< Input clock divided by 64 */
+#define LL_LPUART_PRESCALER_DIV128 (USART_PRESC_PRESCALER_3 |\
+ USART_PRESC_PRESCALER_1) /*!< Input clock divided by 128 */
+#define LL_LPUART_PRESCALER_DIV256 (USART_PRESC_PRESCALER_3 |\
+ USART_PRESC_PRESCALER_1 |\
+ USART_PRESC_PRESCALER_0) /*!< Input clock divided by 256 */
/**
* @}
*/
@@ -293,8 +304,8 @@
/** @defgroup LPUART_LL_EC_STOPBITS Stop Bits
* @{
*/
-#define LL_LPUART_STOPBITS_1 0x00000000U /*!< 1 stop bit */
-#define LL_LPUART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */
+#define LL_LPUART_STOPBITS_1 0x00000000U /*!< 1 stop bit */
+#define LL_LPUART_STOPBITS_2 USART_CR2_STOP_1 /*!< 2 stop bits */
/**
* @}
*/
@@ -302,8 +313,8 @@
/** @defgroup LPUART_LL_EC_TXRX TX RX Pins Swap
* @{
*/
-#define LL_LPUART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */
-#define LL_LPUART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */
+#define LL_LPUART_TXRX_STANDARD 0x00000000U /*!< TX/RX pins are used as defined in standard pinout */
+#define LL_LPUART_TXRX_SWAPPED (USART_CR2_SWAP) /*!< TX and RX pins functions are swapped. */
/**
* @}
*/
@@ -311,8 +322,8 @@
/** @defgroup LPUART_LL_EC_RXPIN_LEVEL RX Pin Active Level Inversion
* @{
*/
-#define LL_LPUART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */
-#define LL_LPUART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */
+#define LL_LPUART_RXPIN_LEVEL_STANDARD 0x00000000U /*!< RX pin signal works using the standard logic levels */
+#define LL_LPUART_RXPIN_LEVEL_INVERTED (USART_CR2_RXINV) /*!< RX pin signal values are inverted. */
/**
* @}
*/
@@ -320,8 +331,8 @@
/** @defgroup LPUART_LL_EC_TXPIN_LEVEL TX Pin Active Level Inversion
* @{
*/
-#define LL_LPUART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */
-#define LL_LPUART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */
+#define LL_LPUART_TXPIN_LEVEL_STANDARD 0x00000000U /*!< TX pin signal works using the standard logic levels */
+#define LL_LPUART_TXPIN_LEVEL_INVERTED (USART_CR2_TXINV) /*!< TX pin signal values are inverted. */
/**
* @}
*/
@@ -329,8 +340,11 @@
/** @defgroup LPUART_LL_EC_BINARY_LOGIC Binary Data Inversion
* @{
*/
-#define LL_LPUART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received in positive/direct logic. (1=H, 0=L) */
-#define LL_LPUART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received in negative/inverse logic. (1=L, 0=H). The parity bit is also inverted. */
+#define LL_LPUART_BINARY_LOGIC_POSITIVE 0x00000000U /*!< Logical data from the data register are send/received
+ in positive/direct logic. (1=H, 0=L) */
+#define LL_LPUART_BINARY_LOGIC_NEGATIVE USART_CR2_DATAINV /*!< Logical data from the data register are send/received
+ in negative/inverse logic. (1=L, 0=H).
+ The parity bit is also inverted. */
/**
* @}
*/
@@ -338,8 +352,10 @@
/** @defgroup LPUART_LL_EC_BITORDER Bit Order
* @{
*/
-#define LL_LPUART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first, following the start bit */
-#define LL_LPUART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first, following the start bit */
+#define LL_LPUART_BITORDER_LSBFIRST 0x00000000U /*!< data is transmitted/received with data bit 0 first,
+ following the start bit */
+#define LL_LPUART_BITORDER_MSBFIRST USART_CR2_MSBFIRST /*!< data is transmitted/received with the MSB first,
+ following the start bit */
/**
* @}
*/
@@ -347,8 +363,8 @@
/** @defgroup LPUART_LL_EC_ADDRESS_DETECT Address Length Detection
* @{
*/
-#define LL_LPUART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */
-#define LL_LPUART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */
+#define LL_LPUART_ADDRESS_DETECT_4B 0x00000000U /*!< 4-bit address detection method selected */
+#define LL_LPUART_ADDRESS_DETECT_7B USART_CR2_ADDM7 /*!< 7-bit address detection (in 8-bit data mode) method selected */
/**
* @}
*/
@@ -356,10 +372,12 @@
/** @defgroup LPUART_LL_EC_HWCONTROL Hardware Control
* @{
*/
-#define LL_LPUART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */
-#define LL_LPUART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested when there is space in the receive buffer */
-#define LL_LPUART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted when the nCTS input is asserted (tied to 0) */
-#define LL_LPUART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */
+#define LL_LPUART_HWCONTROL_NONE 0x00000000U /*!< CTS and RTS hardware flow control disabled */
+#define LL_LPUART_HWCONTROL_RTS USART_CR3_RTSE /*!< RTS output enabled, data is only requested
+ when there is space in the receive buffer */
+#define LL_LPUART_HWCONTROL_CTS USART_CR3_CTSE /*!< CTS mode enabled, data is only transmitted
+ when the nCTS input is asserted (tied to 0)*/
+#define LL_LPUART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) /*!< CTS and RTS hardware flow control enabled */
/**
* @}
*/
@@ -367,9 +385,9 @@
/** @defgroup LPUART_LL_EC_WAKEUP_ON Wakeup Activation
* @{
*/
-#define LL_LPUART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */
-#define LL_LPUART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */
-#define LL_LPUART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */
+#define LL_LPUART_WAKEUP_ON_ADDRESS 0x00000000U /*!< Wake up active on address match */
+#define LL_LPUART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 /*!< Wake up active on Start bit detection */
+#define LL_LPUART_WAKEUP_ON_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) /*!< Wake up active on RXNE */
/**
* @}
*/
@@ -377,8 +395,8 @@
/** @defgroup LPUART_LL_EC_DE_POLARITY Driver Enable Polarity
* @{
*/
-#define LL_LPUART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */
-#define LL_LPUART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */
+#define LL_LPUART_DE_POLARITY_HIGH 0x00000000U /*!< DE signal is active high */
+#define LL_LPUART_DE_POLARITY_LOW USART_CR3_DEP /*!< DE signal is active low */
/**
* @}
*/
@@ -386,8 +404,8 @@
/** @defgroup LPUART_LL_EC_DMA_REG_DATA DMA Register Data
* @{
*/
-#define LL_LPUART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */
-#define LL_LPUART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */
+#define LL_LPUART_DMA_REG_DATA_TRANSMIT 0x00000000U /*!< Get address of data register used for transmission */
+#define LL_LPUART_DMA_REG_DATA_RECEIVE 0x00000001U /*!< Get address of data register used for reception */
/**
* @}
*/
@@ -559,7 +577,7 @@
*/
__STATIC_INLINE void LL_LPUART_SetTXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold)
{
- MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos);
+ ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos);
}
/**
@@ -594,7 +612,7 @@
*/
__STATIC_INLINE void LL_LPUART_SetRXFIFOThreshold(USART_TypeDef *LPUARTx, uint32_t Threshold)
{
- MODIFY_REG(LPUARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos);
+ ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos);
}
/**
@@ -637,8 +655,8 @@
*/
__STATIC_INLINE void LL_LPUART_ConfigFIFOsThreshold(USART_TypeDef *LPUARTx, uint32_t TXThreshold, uint32_t RXThreshold)
{
- MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \
- (RXThreshold << USART_CR3_RXFTCFG_Pos));
+ ATOMIC_MODIFY_REG(LPUARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | \
+ (RXThreshold << USART_CR3_RXFTCFG_Pos));
}
/**
@@ -651,7 +669,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableInStopMode(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_UESM);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_UESM);
}
/**
@@ -663,7 +681,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableInStopMode(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_UESM);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_UESM);
}
/**
@@ -686,7 +704,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableDirectionRx(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_RE);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RE);
}
/**
@@ -697,7 +715,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableDirectionRx(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_RE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RE);
}
/**
@@ -708,7 +726,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableDirectionTx(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_TE);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TE);
}
/**
@@ -719,7 +737,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableDirectionTx(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_TE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TE);
}
/**
@@ -737,7 +755,7 @@
*/
__STATIC_INLINE void LL_LPUART_SetTransferDirection(USART_TypeDef *LPUARTx, uint32_t TransferDirection)
{
- MODIFY_REG(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection);
+ ATOMIC_MODIFY_REG(LPUARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection);
}
/**
@@ -854,7 +872,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableMuteMode(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_MME);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_MME);
}
/**
@@ -865,7 +883,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableMuteMode(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_MME);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_MME);
}
/**
@@ -1928,7 +1946,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_IDLE(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_IDLEIE);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_IDLEIE);
}
/* Legacy define */
@@ -1942,7 +1960,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
}
/**
@@ -1953,7 +1971,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_TC(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_TCIE);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TCIE);
}
/* Legacy define */
@@ -1967,7 +1985,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_TXE_TXFNF(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
}
/**
@@ -1978,7 +1996,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_PE(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_PEIE);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_PEIE);
}
/**
@@ -1989,7 +2007,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_CM(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_CMIE);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_CMIE);
}
/**
@@ -2000,7 +2018,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_TXFE(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_TXFEIE);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_TXFEIE);
}
/**
@@ -2011,7 +2029,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_RXFF(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR1, USART_CR1_RXFFIE);
+ ATOMIC_SET_BIT(LPUARTx->CR1, USART_CR1_RXFFIE);
}
/**
@@ -2026,7 +2044,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_ERROR(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR3, USART_CR3_EIE);
+ ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_EIE);
}
/**
@@ -2037,7 +2055,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_CTS(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR3, USART_CR3_CTSIE);
+ ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_CTSIE);
}
/**
@@ -2048,7 +2066,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_WKUP(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR3, USART_CR3_WUFIE);
+ ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_WUFIE);
}
/**
@@ -2059,7 +2077,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_TXFT(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR3, USART_CR3_TXFTIE);
+ ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_TXFTIE);
}
/**
@@ -2070,7 +2088,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableIT_RXFT(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR3, USART_CR3_RXFTIE);
+ ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_RXFTIE);
}
/**
@@ -2081,7 +2099,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_IDLE(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_IDLEIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_IDLEIE);
}
/* Legacy define */
@@ -2095,7 +2113,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_RXNE_RXFNE(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
}
/**
@@ -2106,7 +2124,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_TC(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_TCIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TCIE);
}
/* Legacy define */
@@ -2120,7 +2138,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_TXE_TXFNF(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
}
/**
@@ -2131,7 +2149,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_PE(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_PEIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_PEIE);
}
/**
@@ -2142,7 +2160,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_CM(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_CMIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_CMIE);
}
/**
@@ -2153,7 +2171,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_TXFE(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXFEIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_TXFEIE);
}
/**
@@ -2164,7 +2182,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_RXFF(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXFFIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR1, USART_CR1_RXFFIE);
}
/**
@@ -2179,7 +2197,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_ERROR(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR3, USART_CR3_EIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_EIE);
}
/**
@@ -2190,7 +2208,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_CTS(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_CTSIE);
}
/**
@@ -2201,7 +2219,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_WKUP(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR3, USART_CR3_WUFIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_WUFIE);
}
/**
@@ -2212,7 +2230,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_TXFT(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR3, USART_CR3_TXFTIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_TXFTIE);
}
/**
@@ -2223,7 +2241,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableIT_RXFT(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR3, USART_CR3_RXFTIE);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_RXFTIE);
}
/**
@@ -2391,7 +2409,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableDMAReq_RX(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR3, USART_CR3_DMAR);
+ ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAR);
}
/**
@@ -2402,7 +2420,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableDMAReq_RX(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAR);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAR);
}
/**
@@ -2424,7 +2442,7 @@
*/
__STATIC_INLINE void LL_LPUART_EnableDMAReq_TX(USART_TypeDef *LPUARTx)
{
- SET_BIT(LPUARTx->CR3, USART_CR3_DMAT);
+ ATOMIC_SET_BIT(LPUARTx->CR3, USART_CR3_DMAT);
}
/**
@@ -2435,7 +2453,7 @@
*/
__STATIC_INLINE void LL_LPUART_DisableDMAReq_TX(USART_TypeDef *LPUARTx)
{
- CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAT);
+ ATOMIC_CLEAR_BIT(LPUARTx->CR3, USART_CR3_DMAT);
}
/**
diff --git a/Inc/stm32g0xx_ll_pwr.h b/Inc/stm32g0xx_ll_pwr.h
index b6a8779..11ef14e 100644
--- a/Inc/stm32g0xx_ll_pwr.h
+++ b/Inc/stm32g0xx_ll_pwr.h
@@ -6,11 +6,11 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2018 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
+ * the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
@@ -62,7 +62,7 @@
#define LL_PWR_SCR_CWUF4 PWR_SCR_CWUF4
#if defined(PWR_CR3_EWUP3)
#define LL_PWR_SCR_CWUF3 PWR_SCR_CWUF3
-#endif
+#endif /* PWR_CR3_EWUP3 */
#define LL_PWR_SCR_CWUF2 PWR_SCR_CWUF2
#define LL_PWR_SCR_CWUF1 PWR_SCR_CWUF1
/**
@@ -80,12 +80,12 @@
#define LL_PWR_SR1_WUF4 PWR_SR1_WUF4
#if defined(PWR_CR3_EWUP3)
#define LL_PWR_SR1_WUF3 PWR_SR1_WUF3
-#endif
+#endif /* PWR_CR3_EWUP3 */
#define LL_PWR_SR1_WUF2 PWR_SR1_WUF2
#define LL_PWR_SR1_WUF1 PWR_SR1_WUF1
#if defined(PWR_SR2_PVDO)
#define LL_PWR_SR2_PVDO PWR_SR2_PVDO
-#endif
+#endif /* PWR_SR2_PVDO */
#define LL_PWR_SR2_VOSF PWR_SR2_VOSF
#define LL_PWR_SR2_REGLPF PWR_SR2_REGLPF
#define LL_PWR_SR2_REGLPS PWR_SR2_REGLPS
@@ -110,7 +110,7 @@
#define LL_PWR_MODE_STANDBY (PWR_CR1_LPMS_1|PWR_CR1_LPMS_0)
#if defined (PWR_CR1_LPMS_2)
#define LL_PWR_MODE_SHUTDOWN (PWR_CR1_LPMS_2)
-#endif
+#endif /* PWR_CR1_LPMS_2 */
/**
* @}
*/
@@ -138,7 +138,7 @@
/**
* @}
*/
-#endif
+#endif /* PWR_CR2_PVDE */
#if defined(PWR_PVM_SUPPORT)
/** @defgroup PWR_LL_EC_PVM_IP PVM_IP
@@ -148,8 +148,8 @@
/**
* @}
*/
-#endif
-
+#endif /* PWR_PVM_SUPPORT */
+
/** @defgroup PWR_LL_EC_WAKEUP WAKEUP
* @{
*/
@@ -157,11 +157,11 @@
#define LL_PWR_WAKEUP_PIN2 (PWR_CR3_EWUP2)
#if defined(PWR_CR3_EWUP3)
#define LL_PWR_WAKEUP_PIN3 (PWR_CR3_EWUP3)
-#endif
+#endif /* PWR_CR3_EWUP3 */
#define LL_PWR_WAKEUP_PIN4 (PWR_CR3_EWUP4)
#if defined(PWR_CR3_EWUP5)
#define LL_PWR_WAKEUP_PIN5 (PWR_CR3_EWUP5)
-#endif
+#endif /* PWR_CR3_EWUP5 */
#define LL_PWR_WAKEUP_PIN6 (PWR_CR3_EWUP6)
/**
* @}
@@ -185,7 +185,7 @@
#define LL_PWR_GPIO_D ((uint32_t)(&(PWR->PUCRD)))
#if defined(GPIOE)
#define LL_PWR_GPIO_E ((uint32_t)(&(PWR->PUCRE)))
-#endif
+#endif /* GPIOE */
#define LL_PWR_GPIO_F ((uint32_t)(&(PWR->PUCRF)))
/**
* @}
@@ -483,9 +483,7 @@
{
return ((READ_BIT(PWR->CR2, PWR_CR2_IOSV) == (PWR_CR2_IOSV)) ? 1UL : 0UL);
}
-#endif
-#if defined(STM32G0C1xx) || defined(STM32G0B1xx)
/**
* @brief Enable VDDUSB supply
* @rmtoll CR2 USV LL_PWR_EnableVddUSB
@@ -515,7 +513,7 @@
{
return ((READ_BIT(PWR->CR2, PWR_CR2_USV) == (PWR_CR2_USV)) ? 1UL : 0UL);
}
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
#if defined (PWR_PVM_SUPPORT)
/**
@@ -559,7 +557,7 @@
{
return ((READ_BIT(PWR->CR2, PeriphVoltage) == (PeriphVoltage)) ? 1UL : 0UL);
}
-#endif
+#endif /* PWR_PVM_SUPPORT */
/**
* @brief Set Low-Power mode
@@ -691,7 +689,7 @@
{
return ((READ_BIT(PWR->CR2, PWR_CR2_PVDE) == (PWR_CR2_PVDE)) ? 1UL : 0UL);
}
-#endif
+#endif /* PWR_CR2_PVDE */
/**
* @brief Enable Internal Wake-up line
@@ -783,7 +781,7 @@
{
return ((READ_BIT(PWR->CR3, PWR_CR3_RRS) == (PWR_CR3_RRS)) ? 1UL : 0UL);
}
-#endif
+#endif /* PWR_CR3_RRS */
#if defined(PWR_CR3_ENB_ULP)
/**
@@ -815,7 +813,7 @@
{
return ((READ_BIT(PWR->CR3, PWR_CR3_ENB_ULP) == (PWR_CR3_ENB_ULP)) ? 1UL : 0UL);
}
-#endif
+#endif /* PWR_CR3_ENB_ULP */
/**
* @brief Enable the WakeUp PINx functionality
@@ -1292,7 +1290,7 @@
{
return ((READ_BIT(PWR->SR1, PWR_SR1_WUF5) == (PWR_SR1_WUF5)) ? 1UL : 0UL);
}
-#endif
+#endif /* PWR_CR3_EWUP5 */
/**
* @brief Get Wake-up Flag 4
@@ -1314,7 +1312,7 @@
{
return ((READ_BIT(PWR->SR1, PWR_SR1_WUF3) == (PWR_SR1_WUF3)) ? 1UL : 0UL);
}
-#endif
+#endif /* PWR_CR3_EWUP3 */
/**
* @brief Get Wake-up Flag 2
@@ -1376,7 +1374,7 @@
{
WRITE_REG(PWR->SCR, PWR_SCR_CWUF5);
}
-#endif
+#endif /* PWR_CR3_EWUP5 */
/**
* @brief Clear Wake-up Flag 4
@@ -1398,7 +1396,7 @@
{
WRITE_REG(PWR->SCR, PWR_SCR_CWUF3);
}
-#endif
+#endif /* PWR_CR3_EWUP3 */
/**
* @brief Clear Wake-up Flag 2
@@ -1431,7 +1429,7 @@
{
return ((READ_BIT(PWR->SR2, PWR_SR2_PVMO_USB) == (PWR_SR2_PVMO_USB)) ? 1UL : 0UL);
}
-#endif
+#endif /* PWR_PVM_SUPPORT */
#if defined(PWR_SR2_PVDO)
/**
@@ -1444,7 +1442,7 @@
{
return ((READ_BIT(PWR->SR2, PWR_SR2_PVDO) == (PWR_SR2_PVDO)) ? 1UL : 0UL);
}
-#endif
+#endif /* PWR_SR2_PVDO */
/**
* @brief Indicate whether the regulator is ready in the selected voltage
diff --git a/Inc/stm32g0xx_ll_rcc.h b/Inc/stm32g0xx_ll_rcc.h
index da063f4..fdc11b3 100644
--- a/Inc/stm32g0xx_ll_rcc.h
+++ b/Inc/stm32g0xx_ll_rcc.h
@@ -495,7 +495,7 @@
/**
* @}
-*/
+ */
#endif /* CEC */
#if defined(FDCAN1) || defined(FDCAN2)
@@ -508,7 +508,7 @@
/**
* @}
-*/
+ */
#endif /* FDCAN1 || FDCAN2 */
#if defined(RNG)
@@ -857,7 +857,7 @@
*/
#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) \
((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \
- (((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos) + 1U))
+ (((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos) + 1U))
/**
* @brief Helper macro to calculate the PLLPCLK frequency used on I2S domain
@@ -910,7 +910,7 @@
*/
#define __LL_RCC_CALC_PLLCLK_I2S1_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \
((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \
- (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U))
+ (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U))
#if defined(RCC_CCIPR2_I2S2SEL)
/**
@@ -964,7 +964,7 @@
*/
#define __LL_RCC_CALC_PLLCLK_I2S2_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \
((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \
- (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U))
+ (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U))
#endif /* RCC_CCIPR2_I2S2SEL */
/**
@@ -1018,7 +1018,7 @@
*/
#define __LL_RCC_CALC_PLLCLK_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) \
((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \
- (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U))
+ (((__PLLP__) >> RCC_PLLCFGR_PLLP_Pos) + 1U))
#if defined(RNG)
/**
@@ -1048,7 +1048,7 @@
*/
#define __LL_RCC_CALC_PLLCLK_RNG_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \
((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \
- (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U))
+ (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U))
#endif /* RNG */
#if defined(RCC_PLLQ_SUPPORT)
@@ -1079,7 +1079,7 @@
*/
#define __LL_RCC_CALC_PLLCLK_TIM1_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \
((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \
- (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U))
+ (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U))
#if defined(TIM15)
/**
* @brief Helper macro to calculate the PLLQCLK frequency used on TIM15 domain
@@ -1108,7 +1108,7 @@
*/
#define __LL_RCC_CALC_PLLCLK_TIM15_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \
((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \
- (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U))
+ (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U))
#endif /* TIM15 */
#endif /* RCC_PLLQ_SUPPORT */
@@ -1140,7 +1140,7 @@
*/
#define __LL_RCC_CALC_PLLCLK_FDCAN_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \
((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \
- (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U))
+ (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U))
#endif /* FDCAN1 || FDCAN2 */
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
@@ -1171,7 +1171,7 @@
*/
#define __LL_RCC_CALC_PLLCLK_USB_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) \
((__INPUTFREQ__) * (__PLLN__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) / \
- (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U))
+ (((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U))
#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/**
@@ -2083,7 +2083,7 @@
}
#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
-#if defined (FDCAN1) || defined (FDCAN2)
+#if defined (FDCAN1) || defined (FDCAN2)
/**
* @brief Configure FDCAN clock source
* @rmtoll CCIPR2 FDCANSEL LL_RCC_SetFDCANClockSource
diff --git a/Inc/stm32g0xx_ll_rng.h b/Inc/stm32g0xx_ll_rng.h
index 7270bf8..e8a090a 100644
--- a/Inc/stm32g0xx_ll_rng.h
+++ b/Inc/stm32g0xx_ll_rng.h
@@ -57,8 +57,8 @@
{
uint32_t ClockErrorDetection; /*!< Clock error detection.
This parameter can be one value of @ref RNG_LL_CED.
-
- This parameter can be modified using unitary functions @ref LL_RNG_EnableClkErrorDetect(). */
+ This parameter can be modified using unitary
+ functions @ref LL_RNG_EnableClkErrorDetect(). */
} LL_RNG_InitTypeDef;
/**
diff --git a/Inc/stm32g0xx_ll_rtc.h b/Inc/stm32g0xx_ll_rtc.h
index bf2e530..6b8160b 100644
--- a/Inc/stm32g0xx_ll_rtc.h
+++ b/Inc/stm32g0xx_ll_rtc.h
@@ -424,7 +424,7 @@
#define LL_RTC_TAMPER_2 TAMP_CR1_TAMP2E /*!< Tamper 2 input detection */
#if defined (TAMP_CR1_TAMP3E)
#define LL_RTC_TAMPER_3 TAMP_CR1_TAMP3E /*!< Tamper 3 input detection */
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/**
* @}
*/
@@ -436,7 +436,7 @@
#define LL_RTC_TAMPER_MASK_TAMPER2 TAMP_CR2_TAMP2MSK /*!< Tamper 2 event generates a trigger event. TAMP2F is masked and internally cleared by hardware. The backup registers are not erased. */
#if defined (TAMP_CR1_TAMP3E)
#define LL_RTC_TAMPER_MASK_TAMPER3 TAMP_CR2_TAMP3MSK /*!< Tamper 3 event generates a trigger event. TAMP3F is masked and internally cleared by hardware. The backup registers are not erased. */
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/**
* @}
*/
@@ -448,7 +448,7 @@
#define LL_RTC_TAMPER_NOERASE_TAMPER2 TAMP_CR2_TAMP2NOERASE /*!< Tamper 2 event does not erase the backup registers. */
#if defined (TAMP_CR1_TAMP3E)
#define LL_RTC_TAMPER_NOERASE_TAMPER3 TAMP_CR2_TAMP3NOERASE /*!< Tamper 3 event does not erase the backup registers. */
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/**
* @}
*/
@@ -497,7 +497,7 @@
#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP2 TAMP_CR2_TAMP2TRG /*!< Tamper 2 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */
#if defined (TAMP_CR1_TAMP3E)
#define LL_RTC_TAMPER_ACTIVELEVEL_TAMP3 TAMP_CR2_TAMP3TRG /*!< Tamper 3 input falling edge (if TAMPFLT = 00) or staying high (if TAMPFLT != 00) triggers a tamper detection event */
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/**
* @}
*/
@@ -3573,7 +3573,7 @@
{
return ((READ_BIT(TAMPx->SR, TAMP_SR_TAMP3F) == (TAMP_SR_TAMP3F)) ? 1UL : 0UL);
}
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/**
* @brief Get internal tamper 3 detection flag.
* @rmtoll TAMP_SR ITAMP3F LL_RTC_IsActiveFlag_ITAMP3
@@ -3652,7 +3652,7 @@
{
return ((READ_BIT(TAMPx->MISR, TAMP_MISR_TAMP3MF) == (TAMP_MISR_TAMP3MF)) ? 1UL : 0UL);
}
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/**
* @brief Get internal tamper 3 interrupt masked flag.
@@ -3732,7 +3732,7 @@
{
SET_BIT(TAMPx->SCR, TAMP_SCR_CTAMP3F);
}
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/**
* @brief Clear internal tamper 3 detection flag.
@@ -3993,7 +3993,7 @@
{
CLEAR_BIT(TAMPx->IER, TAMP_IER_TAMP3IE);
}
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/**
* @brief Enable internal tamper 3 interrupt.
@@ -4117,7 +4117,7 @@
{
return ((READ_BIT(TAMPx->IER, TAMP_IER_TAMP3IE) == (TAMP_IER_TAMP3IE)) ? 1UL : 0UL);
}
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/**
* @brief Check if internal tamper 3 interrupt is enabled or not.
diff --git a/Inc/stm32g0xx_ll_spi.h b/Inc/stm32g0xx_ll_spi.h
index bba313a..ca2ce61 100644
--- a/Inc/stm32g0xx_ll_spi.h
+++ b/Inc/stm32g0xx_ll_spi.h
@@ -1333,7 +1333,7 @@
*/
__STATIC_INLINE uint8_t LL_SPI_ReceiveData8(SPI_TypeDef *SPIx)
{
- return (uint8_t)(READ_REG(SPIx->DR));
+ return (*((__IO uint8_t *)&SPIx->DR));
}
/**
diff --git a/Inc/stm32g0xx_ll_tim.h b/Inc/stm32g0xx_ll_tim.h
index 2acc314..c05a902 100644
--- a/Inc/stm32g0xx_ll_tim.h
+++ b/Inc/stm32g0xx_ll_tim.h
@@ -214,24 +214,29 @@
uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetPrescaler().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetPrescaler().*/
uint32_t CounterMode; /*!< Specifies the counter mode.
This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetCounterMode().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetCounterMode().*/
uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active
Auto-Reload Register at the next update event.
This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
- Some timer instances may support 32 bits counters. In that case this parameter must be a number between 0x0000 and 0xFFFFFFFF.
+ Some timer instances may support 32 bits counters. In that case this parameter must
+ be a number between 0x0000 and 0xFFFFFFFF.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetAutoReload().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetAutoReload().*/
uint32_t ClockDivision; /*!< Specifies the clock division.
This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetClockDivision().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetClockDivision().*/
uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
reaches zero, an update event is generated and counting restarts
@@ -239,10 +244,13 @@
This means in PWM mode that (N+1) corresponds to:
- the number of PWM periods in edge-aligned mode
- the number of half PWM period in center-aligned mode
- GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
- Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.
+ GP timers: this parameter must be a number between Min_Data = 0x00 and
+ Max_Data = 0xFF.
+ Advanced timers: this parameter must be a number between Min_Data = 0x0000 and
+ Max_Data = 0xFFFF.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetRepetitionCounter().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetRepetitionCounter().*/
} LL_TIM_InitTypeDef;
/**
@@ -253,43 +261,51 @@
uint32_t OCMode; /*!< Specifies the output mode.
This parameter can be a value of @ref TIM_LL_EC_OCMODE.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetMode().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetMode().*/
uint32_t OCState; /*!< Specifies the TIM Output Compare state.
This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
- This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state.
This parameter can be a value of @ref TIM_LL_EC_OCSTATE.
- This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/
uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register.
This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF.
- This feature can be modified afterwards using unitary function LL_TIM_OC_SetCompareCHx (x=1..6).*/
+ This feature can be modified afterwards using unitary function
+ LL_TIM_OC_SetCompareCHx (x=1..6).*/
uint32_t OCPolarity; /*!< Specifies the output polarity.
This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetPolarity().*/
uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetPolarity().*/
uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetIdleState().*/
uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetIdleState().*/
} LL_TIM_OC_InitTypeDef;
/**
@@ -302,22 +318,26 @@
uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
uint32_t ICActiveInput; /*!< Specifies the input.
This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetActiveInput().*/
uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
This parameter can be a value of @ref TIM_LL_EC_ICPSC.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
uint32_t ICFilter; /*!< Specifies the input capture filter.
This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
} LL_TIM_IC_InitTypeDef;
@@ -329,47 +349,56 @@
uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4).
This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE.
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetEncoderMode().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetEncoderMode().*/
uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input.
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source
This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetActiveInput().*/
uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value.
This parameter can be a value of @ref TIM_LL_EC_ICPSC.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
uint32_t IC1Filter; /*!< Specifies the TI1 input filter.
This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input.
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source
This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetActiveInput().*/
uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value.
This parameter can be a value of @ref TIM_LL_EC_ICPSC.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
uint32_t IC2Filter; /*!< Specifies the TI2 input filter.
This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
} LL_TIM_ENCODER_InitTypeDef;
@@ -382,26 +411,31 @@
uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input.
This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPolarity().*/
uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value.
Prescaler must be set to get a maximum counter period longer than the
time interval between 2 consecutive changes on the Hall inputs.
This parameter can be a value of @ref TIM_LL_EC_ICPSC.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetPrescaler().*/
uint32_t IC1Filter; /*!< Specifies the TI1 input filter.
- This parameter can be a value of @ref TIM_LL_EC_IC_FILTER.
+ This parameter can be a value of
+ @ref TIM_LL_EC_IC_FILTER.
- This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_IC_SetFilter().*/
uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register.
A positive pulse (TRGO event) is generated with a programmable delay every time
a change occurs on the Hall inputs.
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetCompareCH2().*/
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetCompareCH2().*/
} LL_TIM_HALLSENSOR_InitTypeDef;
/**
@@ -412,97 +446,121 @@
uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode.
This parameter can be a value of @ref TIM_LL_EC_OSSR
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates()
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetOffStates()
- @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */
+ @note This bit-field cannot be modified as long as LOCK level 2 has been
+ programmed. */
uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state.
This parameter can be a value of @ref TIM_LL_EC_OSSI
- This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates()
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_SetOffStates()
- @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */
+ @note This bit-field cannot be modified as long as LOCK level 2 has been
+ programmed. */
uint32_t LockLevel; /*!< Specifies the LOCK level parameters.
This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL
- @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR register
- has been written, their content is frozen until the next reset.*/
+ @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR
+ register has been written, their content is frozen until the next reset.*/
uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the
switching-on of the outputs.
This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF.
- This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetDeadTime()
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_OC_SetDeadTime()
- @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been
+ programmed. */
uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not.
This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE
- This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK()
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK()
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity.
This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY
- This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK()
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_ConfigBRK()
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
uint32_t BreakFilter; /*!< Specifies the TIM Break Filter.
This parameter can be a value of @ref TIM_LL_EC_BREAK_FILTER
- This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK()
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_ConfigBRK()
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
uint32_t BreakAFMode; /*!< Specifies the alternate function mode of the break input.
This parameter can be a value of @ref TIM_LL_EC_BREAK_AFMODE
- This feature can be modified afterwards using unitary functions @ref LL_TIM_ConfigBRK()
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_ConfigBRK()
@note Bidirectional break input is only supported by advanced timers instances.
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
uint32_t Break2State; /*!< Specifies whether the TIM Break2 input is enabled or not.
This parameter can be a value of @ref TIM_LL_EC_BREAK2_ENABLE
- This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK2() or @ref LL_TIM_DisableBRK2()
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_EnableBRK2() or @ref LL_TIM_DisableBRK2()
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
uint32_t Break2Polarity; /*!< Specifies the TIM Break2 Input pin polarity.
This parameter can be a value of @ref TIM_LL_EC_BREAK2_POLARITY
- This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK2()
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_ConfigBRK2()
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
uint32_t Break2Filter; /*!< Specifies the TIM Break2 Filter.
This parameter can be a value of @ref TIM_LL_EC_BREAK2_FILTER
- This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK2()
+ This feature can be modified afterwards using unitary function
+ @ref LL_TIM_ConfigBRK2()
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
uint32_t Break2AFMode; /*!< Specifies the alternate function mode of the break2 input.
This parameter can be a value of @ref TIM_LL_EC_BREAK2_AFMODE
- This feature can be modified afterwards using unitary functions @ref LL_TIM_ConfigBRK2()
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_ConfigBRK2()
@note Bidirectional break input is only supported by advanced timers instances.
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not.
This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE
- This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput()
+ This feature can be modified afterwards using unitary functions
+ @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput()
- @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */
+ @note This bit-field can not be modified as long as LOCK level 1 has been
+ programmed. */
} LL_TIM_BDTR_InitTypeDef;
/**
@@ -596,8 +654,8 @@
/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode
* @{
*/
-#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter is not stopped at update event */
-#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter stops counting at the next update event */
+#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */
+#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */
/**
* @}
*/
@@ -1141,7 +1199,7 @@
#define LL_TIM_TIM1_TI1_RMP_GPIO 0x00000000U /*!< TIM1 input 1 is connected to GPIO */
#if defined(COMP1)
#define LL_TIM_TIM1_TI1_RMP_COMP1 TIM_TISEL_TI1SEL_0 /*!< TIM1 input 1 is connected to COMP1_OUT */
-#endif
+#endif /* COMP1 */
/**
* @}
*/
@@ -1152,7 +1210,7 @@
#define LL_TIM_TIM1_TI2_RMP_GPIO 0x00000000U /*!< TIM1 input 2 is connected to GPIO */
#if defined(COMP2)
#define LL_TIM_TIM1_TI2_RMP_COMP2 TIM_TISEL_TI2SEL_0 /*!< TIM1 input 2 is connected to COMP2_OUT */
-#endif
+#endif /* COMP2 */
/**
* @}
*/
@@ -1163,7 +1221,7 @@
#define LL_TIM_TIM1_TI3_RMP_GPIO 0x00000000U /*!< TIM1 input 3 is connected to GPIO */
#if defined(COMP3)
#define LL_TIM_TIM1_TI3_RMP_COMP3 TIM_TISEL_TI3SEL_0 /*!< TIM1 input 3 is connected to COMP3_OUT */
-#endif
+#endif /* COMP3 */
/**
* @}
*/
@@ -1193,11 +1251,11 @@
#define LL_TIM_TIM2_TI3_RMP_GPIO 0x00000000U /*!< TIM2 input 3 is connected to GPIO */
#if defined(COMP3)
#define LL_TIM_TIM2_TI3_RMP_COMP3 TIM_TISEL_TI3SEL_0 /*!< TIM2 input 3 is connected to COMP3_OUT */
-#endif
+#endif /* COMP3 */
/**
* @}
*/
-#endif
+#endif /* TIM2 */
/** @defgroup TIM_LL_EC_TIM3_TI1_RMP TIM3 Timer Input Ch1 Remap
* @{
@@ -1205,7 +1263,7 @@
#define LL_TIM_TIM3_TI1_RMP_GPIO 0x00000000U /*!< TIM3 input 1 is connected to GPIO */
#if defined(COMP1)
#define LL_TIM_TIM3_TI1_RMP_COMP1 TIM_TISEL_TI1SEL_0 /*!< TIM3 input 1 is connected to COMP1_OUT */
-#endif
+#endif /* COMP1 */
/**
* @}
*/
@@ -1216,7 +1274,7 @@
#define LL_TIM_TIM3_TI2_RMP_GPIO 0x00000000U /*!< TIM3 input 2 is connected to GPIO */
#if defined(COMP2)
#define LL_TIM_TIM3_TI2_RMP_COMP2 TIM_TISEL_TI2SEL_0 /*!< TIM3 input 2 is connected to COMP2_OUT */
-#endif
+#endif /* COMP2 */
/**
* @}
*/
@@ -1227,7 +1285,7 @@
#define LL_TIM_TIM3_TI3_RMP_GPIO 0x00000000U /*!< TIM3 input 3 is connected to GPIO */
#if defined(COMP3)
#define LL_TIM_TIM3_TI3_RMP_COMP3 TIM_TISEL_TI3SEL_0 /*!< TIM3 input 3 is connected to COMP3_OUT */
-#endif
+#endif /* COMP3 */
/**
* @}
*/
@@ -1239,7 +1297,7 @@
#define LL_TIM_TIM4_TI1_RMP_GPIO 0x00000000U /*!< TIM4 input 1 is connected to GPIO */
#if defined(COMP1)
#define LL_TIM_TIM4_TI1_RMP_COMP1 TIM_TISEL_TI1SEL_0 /*!< TIM4 input 1 is connected to COMP1_OUT */
-#endif
+#endif /* COMP1 */
/**
* @}
*/
@@ -1250,7 +1308,7 @@
#define LL_TIM_TIM4_TI2_RMP_GPIO 0x00000000U /*!< TIM4 input 2 is connected to GPIO */
#if defined(COMP2)
#define LL_TIM_TIM4_TI2_RMP_COMP2 TIM_TISEL_TI2SEL_0 /*!< TIM4 input 2 is connected to COMP2_OUT */
-#endif
+#endif /* COMP2 */
/**
* @}
*/
@@ -1261,11 +1319,11 @@
#define LL_TIM_TIM4_TI3_RMP_GPIO 0x00000000U /*!< TIM4 input 3 is connected to GPIO */
#if defined(COMP3)
#define LL_TIM_TIM4_TI3_RMP_COMP3 TIM_TISEL_TI3SEL_0 /*!< TIM4 input 3 is connected to COMP3_OUT */
-#endif
+#endif /* COMP3 */
/**
* @}
*/
-#endif
+#endif /* TIM4 */
/** @defgroup TIM_LL_EC_TIM14_TI1_RMP TIM14 Timer Input Ch1 Remap
* @{
@@ -1286,11 +1344,11 @@
#define LL_TIM_TIM15_TI1_RMP_GPIO 0x00000000U /*!< TIM15 input 1 is connected to GPIO */
#if defined(TIM2)
#define LL_TIM_TIM15_TI1_RMP_TIM2_IC1 TIM_TISEL_TI1SEL_0 /*!< TIM15 input 1 is connected to TIM2 input 1 */
-#endif
+#endif /* TIM2 */
#if defined(TIM3)
#define LL_TIM_TIM15_TI1_RMP_TIM3_IC1 TIM_TISEL_TI1SEL_1 /*!< TIM15 input 1 is connected to TIM3 input 1 */
-#endif
-#endif
+#endif /* TIM3 */
+#endif /* TIM15 */
/**
* @}
*/
@@ -1302,11 +1360,11 @@
#define LL_TIM_TIM15_TI2_RMP_GPIO 0x00000000U /*!< TIM15 input 2 is connected to GPIO */
#if defined(TIM2)
#define LL_TIM_TIM15_TI2_RMP_TIM2_IC2 TIM_TISEL_TI2SEL_0 /*!< TIM15 input 2 is connected to TIM2 input 2 */
-#endif
+#endif /* TIM2 */
#if defined(TIM3)
#define LL_TIM_TIM15_TI2_RMP_TIM3_IC2 TIM_TISEL_TI1SEL_1 /*!< TIM15 input 2 is connected to TIM3 input 2 */
-#endif
-#endif
+#endif /* TIM3 */
+#endif /* TIM15 */
/**
* @}
*/
@@ -1418,10 +1476,17 @@
* @retval DTG[0:7]
*/
#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \
- ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \
- (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\
- (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\
- (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\
+ ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \
+ (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \
+ (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\
+ (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \
+ (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\
+ (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \
+ (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \
+ (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\
0U)
/**
@@ -1446,7 +1511,8 @@
((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U)
/**
- * @brief HELPER macro calculating the compare value required to achieve the required timer output compare active/inactive delay.
+ * @brief HELPER macro calculating the compare value required to achieve the required timer output compare
+ * active/inactive delay.
* @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10);
* @param __TIMCLK__ timer input clock frequency (in Hz)
* @param __PSC__ prescaler
@@ -1458,7 +1524,8 @@
/ ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U))))
/**
- * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration (when the timer operates in one pulse mode).
+ * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration
+ * (when the timer operates in one pulse mode).
* @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20);
* @param __TIMCLK__ timer input clock frequency (in Hz)
* @param __PSC__ prescaler
@@ -1669,7 +1736,16 @@
*/
__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx)
{
- return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS));
+ uint32_t counter_mode;
+
+ counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS));
+
+ if (counter_mode == 0U)
+ {
+ counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR));
+ }
+
+ return counter_mode;
}
/**
@@ -1706,7 +1782,8 @@
}
/**
- * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters.
+ * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators
+ * (when supported) and the digital filters.
* @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
* whether or not the clock division feature is supported by the timer
* instance.
@@ -1724,7 +1801,8 @@
}
/**
- * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters.
+ * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time
+ * generators (when supported) and the digital filters.
* @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check
* whether or not the clock division feature is supported by the timer
* instance.
@@ -1866,7 +1944,8 @@
/**
* @brief Force a continuous copy of the update interrupt flag (UIF) into the timer counter register (bit 31).
- * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read in an atomic way.
+ * @note This allows both the counter value and a potential roll-over condition signalled by the UIFCPY flag to be read
+ * in an atomic way.
* @rmtoll CR1 UIFREMAP LL_TIM_EnableUIFRemap
* @param TIMx Timer instance
* @retval None
@@ -2171,7 +2250,7 @@
{
uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
__IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]);
+ MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]);
}
/**
@@ -2210,7 +2289,7 @@
{
uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
- return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]);
+ return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]);
}
/**
@@ -2588,7 +2667,8 @@
}
/**
- * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of the Ocx and OCxN signals).
+ * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of
+ * the Ocx and OCxN signals).
* @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not
* dead-time insertion feature is supported by a timer instance.
* @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter
@@ -2855,7 +2935,8 @@
uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel);
__IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel]));
MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]),
- ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) << SHIFT_TAB_ICxx[iChannel]);
+ ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) \
+ << SHIFT_TAB_ICxx[iChannel]);
MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]),
(Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]);
}
@@ -3526,7 +3607,7 @@
}
#else
MODIFY_REG(TIMx->AF1, TIMx_AF1_ETRSEL, ETRSource);
-#endif
+#endif /* COMP3 */
}
/**
@@ -4430,7 +4511,8 @@
}
/**
- * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set (Capture/Compare 1 interrupt is pending).
+ * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set
+ * (Capture/Compare 1 interrupt is pending).
* @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR
* @param TIMx Timer instance
* @retval State of bit (1 or 0).
@@ -4452,7 +4534,8 @@
}
/**
- * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set (Capture/Compare 2 over-capture interrupt is pending).
+ * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set
+ * (Capture/Compare 2 over-capture interrupt is pending).
* @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR
* @param TIMx Timer instance
* @retval State of bit (1 or 0).
@@ -4474,7 +4557,8 @@
}
/**
- * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set (Capture/Compare 3 over-capture interrupt is pending).
+ * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set
+ * (Capture/Compare 3 over-capture interrupt is pending).
* @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR
* @param TIMx Timer instance
* @retval State of bit (1 or 0).
@@ -4496,7 +4580,8 @@
}
/**
- * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set (Capture/Compare 4 over-capture interrupt is pending).
+ * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set
+ * (Capture/Compare 4 over-capture interrupt is pending).
* @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR
* @param TIMx Timer instance
* @retval State of bit (1 or 0).
diff --git a/Inc/stm32g0xx_ll_usart.h b/Inc/stm32g0xx_ll_usart.h
index e78dd5c..241c25b 100644
--- a/Inc/stm32g0xx_ll_usart.h
+++ b/Inc/stm32g0xx_ll_usart.h
@@ -88,41 +88,49 @@
uint32_t PrescalerValue; /*!< Specifies the Prescaler to compute the communication baud rate.
This parameter can be a value of @ref USART_LL_EC_PRESCALER.
- This feature can be modified afterwards using unitary function @ref LL_USART_SetPrescaler().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_USART_SetPrescaler().*/
uint32_t BaudRate; /*!< This field defines expected Usart communication baud rate.
- This feature can be modified afterwards using unitary function @ref LL_USART_SetBaudRate().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_USART_SetBaudRate().*/
uint32_t DataWidth; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter can be a value of @ref USART_LL_EC_DATAWIDTH.
- This feature can be modified afterwards using unitary function @ref LL_USART_SetDataWidth().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_USART_SetDataWidth().*/
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
This parameter can be a value of @ref USART_LL_EC_STOPBITS.
- This feature can be modified afterwards using unitary function @ref LL_USART_SetStopBitsLength().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_USART_SetStopBitsLength().*/
uint32_t Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref USART_LL_EC_PARITY.
- This feature can be modified afterwards using unitary function @ref LL_USART_SetParity().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_USART_SetParity().*/
uint32_t TransferDirection; /*!< Specifies whether the Receive and/or Transmit mode is enabled or disabled.
This parameter can be a value of @ref USART_LL_EC_DIRECTION.
- This feature can be modified afterwards using unitary function @ref LL_USART_SetTransferDirection().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_USART_SetTransferDirection().*/
uint32_t HardwareFlowControl; /*!< Specifies whether the hardware flow control mode is enabled or disabled.
This parameter can be a value of @ref USART_LL_EC_HWCONTROL.
- This feature can be modified afterwards using unitary function @ref LL_USART_SetHWFlowCtrl().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_USART_SetHWFlowCtrl().*/
uint32_t OverSampling; /*!< Specifies whether USART oversampling mode is 16 or 8.
This parameter can be a value of @ref USART_LL_EC_OVERSAMPLING.
- This feature can be modified afterwards using unitary function @ref LL_USART_SetOverSampling().*/
+ This feature can be modified afterwards using unitary
+ function @ref LL_USART_SetOverSampling().*/
} LL_USART_InitTypeDef;
@@ -141,20 +149,23 @@
uint32_t ClockPolarity; /*!< Specifies the steady state of the serial clock.
This parameter can be a value of @ref USART_LL_EC_POLARITY.
- USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPolarity().
+ USART HW configuration can be modified afterwards using unitary
+ functions @ref LL_USART_SetClockPolarity().
For more details, refer to description of this function. */
uint32_t ClockPhase; /*!< Specifies the clock transition on which the bit capture is made.
This parameter can be a value of @ref USART_LL_EC_PHASE.
- USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetClockPhase().
+ USART HW configuration can be modified afterwards using unitary
+ functions @ref LL_USART_SetClockPhase().
For more details, refer to description of this function. */
uint32_t LastBitClockPulse; /*!< Specifies whether the clock pulse corresponding to the last transmitted
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
This parameter can be a value of @ref USART_LL_EC_LASTCLKPULSE.
- USART HW configuration can be modified afterwards using unitary functions @ref LL_USART_SetLastClkPulseOutput().
+ USART HW configuration can be modified afterwards using unitary
+ functions @ref LL_USART_SetLastClkPulseOutput().
For more details, refer to description of this function. */
} LL_USART_ClockInitTypeDef;
@@ -173,21 +184,21 @@
* @brief Flags defines which can be used with LL_USART_WriteReg function
* @{
*/
-#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error flag */
-#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error flag */
-#define LL_USART_ICR_NECF USART_ICR_NECF /*!< Noise error detected flag */
-#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error flag */
-#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected flag */
-#define LL_USART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty Clear flag */
-#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete flag */
-#define LL_USART_ICR_TCBGTCF USART_ICR_TCBGTCF /*!< Transmission completed before guard time flag */
-#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection flag */
-#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS flag */
-#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout flag */
-#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block flag */
-#define LL_USART_ICR_UDRCF USART_ICR_UDRCF /*!< SPI Slave Underrun Clear flag */
-#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match flag */
-#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode flag */
+#define LL_USART_ICR_PECF USART_ICR_PECF /*!< Parity error clear flag */
+#define LL_USART_ICR_FECF USART_ICR_FECF /*!< Framing error clear flag */
+#define LL_USART_ICR_NECF USART_ICR_NECF /*!< Noise error detected clear flag */
+#define LL_USART_ICR_ORECF USART_ICR_ORECF /*!< Overrun error clear flag */
+#define LL_USART_ICR_IDLECF USART_ICR_IDLECF /*!< Idle line detected clear flag */
+#define LL_USART_ICR_TXFECF USART_ICR_TXFECF /*!< TX FIFO Empty clear flag */
+#define LL_USART_ICR_TCCF USART_ICR_TCCF /*!< Transmission complete clear flag */
+#define LL_USART_ICR_TCBGTCF USART_ICR_TCBGTCF /*!< Transmission completed before guard time clear flag */
+#define LL_USART_ICR_LBDCF USART_ICR_LBDCF /*!< LIN break detection clear flag */
+#define LL_USART_ICR_CTSCF USART_ICR_CTSCF /*!< CTS clear flag */
+#define LL_USART_ICR_RTOCF USART_ICR_RTOCF /*!< Receiver timeout clear flag */
+#define LL_USART_ICR_EOBCF USART_ICR_EOBCF /*!< End of block clear flag */
+#define LL_USART_ICR_UDRCF USART_ICR_UDRCF /*!< SPI Slave Underrun clear flag */
+#define LL_USART_ICR_CMCF USART_ICR_CMCF /*!< Character match clear flag */
+#define LL_USART_ICR_WUCF USART_ICR_WUCF /*!< Wakeup from Stop mode clear flag */
/**
* @}
*/
@@ -563,8 +574,9 @@
* @param __BAUDRATE__ Baud rate value to achieve
* @retval USARTDIV value to be used for BRR register filling in OverSampling_8 case
*/
-#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) (((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))*2U)\
- + ((__BAUDRATE__)/2U))/(__BAUDRATE__))
+#define __LL_USART_DIV_SAMPLING8(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \
+ (((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))*2U)\
+ + ((__BAUDRATE__)/2U))/(__BAUDRATE__))
/**
* @brief Compute USARTDIV value according to Peripheral Clock and
@@ -586,8 +598,9 @@
* @param __BAUDRATE__ Baud rate value to achieve
* @retval USARTDIV value to be used for BRR register filling in OverSampling_16 case
*/
-#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) ((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))\
- + ((__BAUDRATE__)/2U))/(__BAUDRATE__))
+#define __LL_USART_DIV_SAMPLING16(__PERIPHCLK__, __PRESCALER__, __BAUDRATE__) \
+ ((((__PERIPHCLK__)/(USART_PRESCALER_TAB[(__PRESCALER__)]))\
+ + ((__BAUDRATE__)/2U))/(__BAUDRATE__))
/**
* @}
@@ -699,7 +712,7 @@
*/
__STATIC_INLINE void LL_USART_SetTXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold)
{
- MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos);
+ ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG, Threshold << USART_CR3_TXFTCFG_Pos);
}
/**
@@ -738,7 +751,7 @@
*/
__STATIC_INLINE void LL_USART_SetRXFIFOThreshold(USART_TypeDef *USARTx, uint32_t Threshold)
{
- MODIFY_REG(USARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos);
+ ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_RXFTCFG, Threshold << USART_CR3_RXFTCFG_Pos);
}
/**
@@ -785,7 +798,8 @@
*/
__STATIC_INLINE void LL_USART_ConfigFIFOsThreshold(USART_TypeDef *USARTx, uint32_t TXThreshold, uint32_t RXThreshold)
{
- MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) | (RXThreshold << USART_CR3_RXFTCFG_Pos));
+ ATOMIC_MODIFY_REG(USARTx->CR3, USART_CR3_TXFTCFG | USART_CR3_RXFTCFG, (TXThreshold << USART_CR3_TXFTCFG_Pos) |
+ (RXThreshold << USART_CR3_RXFTCFG_Pos));
}
/**
@@ -800,7 +814,7 @@
*/
__STATIC_INLINE void LL_USART_EnableInStopMode(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_UESM);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_UESM);
}
/**
@@ -814,7 +828,7 @@
*/
__STATIC_INLINE void LL_USART_DisableInStopMode(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_UESM);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_UESM);
}
/**
@@ -838,7 +852,7 @@
*/
__STATIC_INLINE void LL_USART_EnableDirectionRx(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_RE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RE);
}
/**
@@ -849,7 +863,7 @@
*/
__STATIC_INLINE void LL_USART_DisableDirectionRx(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_RE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RE);
}
/**
@@ -860,7 +874,7 @@
*/
__STATIC_INLINE void LL_USART_EnableDirectionTx(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_TE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TE);
}
/**
@@ -871,7 +885,7 @@
*/
__STATIC_INLINE void LL_USART_DisableDirectionTx(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_TE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TE);
}
/**
@@ -889,7 +903,7 @@
*/
__STATIC_INLINE void LL_USART_SetTransferDirection(USART_TypeDef *USARTx, uint32_t TransferDirection)
{
- MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection);
+ ATOMIC_MODIFY_REG(USARTx->CR1, USART_CR1_RE | USART_CR1_TE, TransferDirection);
}
/**
@@ -1008,7 +1022,7 @@
*/
__STATIC_INLINE void LL_USART_EnableMuteMode(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_MME);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_MME);
}
/**
@@ -1019,7 +1033,7 @@
*/
__STATIC_INLINE void LL_USART_DisableMuteMode(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_MME);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_MME);
}
/**
@@ -1870,6 +1884,10 @@
{
/* Do not overstep the size of USART_PRESCALER_TAB */
}
+ else if (BaudRate == 0U)
+ {
+ /* Can Not divide per 0 */
+ }
else if (OverSampling == LL_USART_OVERSAMPLING_8)
{
usartdiv = (uint16_t)(__LL_USART_DIV_SAMPLING8(PeriphClk, (uint8_t)PrescalerValue, BaudRate));
@@ -2651,7 +2669,8 @@
{
/* In Asynchronous mode, the following bits must be kept cleared:
- LINEN, CLKEN bits in the USART_CR2 register,
- - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/
+ - SCEN, IREN and HDSEL bits in the USART_CR3 register.
+ */
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL));
}
@@ -2687,7 +2706,8 @@
{
/* In Synchronous mode, the following bits must be kept cleared:
- LINEN bit in the USART_CR2 register,
- - SCEN, IREN and HDSEL bits in the USART_CR3 register.*/
+ - SCEN, IREN and HDSEL bits in the USART_CR3 register.
+ */
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN));
CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN | USART_CR3_HDSEL));
/* set the UART/USART in Synchronous mode */
@@ -2727,7 +2747,8 @@
{
/* In LIN mode, the following bits must be kept cleared:
- STOP and CLKEN bits in the USART_CR2 register,
- - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/
+ - IREN, SCEN and HDSEL bits in the USART_CR3 register.
+ */
CLEAR_BIT(USARTx->CR2, (USART_CR2_CLKEN | USART_CR2_STOP));
CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL));
/* Set the UART/USART in LIN mode */
@@ -2765,7 +2786,8 @@
{
/* In Half Duplex mode, the following bits must be kept cleared:
- LINEN and CLKEN bits in the USART_CR2 register,
- - SCEN and IREN bits in the USART_CR3 register.*/
+ - SCEN and IREN bits in the USART_CR3 register.
+ */
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_IREN));
/* set the UART/USART in Half Duplex mode */
@@ -2805,7 +2827,8 @@
{
/* In Smartcard mode, the following bits must be kept cleared:
- LINEN bit in the USART_CR2 register,
- - IREN and HDSEL bits in the USART_CR3 register.*/
+ - IREN and HDSEL bits in the USART_CR3 register.
+ */
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN));
CLEAR_BIT(USARTx->CR3, (USART_CR3_IREN | USART_CR3_HDSEL));
/* Configure Stop bits to 1.5 bits */
@@ -2848,7 +2871,8 @@
{
/* In IRDA mode, the following bits must be kept cleared:
- LINEN, STOP and CLKEN bits in the USART_CR2 register,
- - SCEN and HDSEL bits in the USART_CR3 register.*/
+ - SCEN and HDSEL bits in the USART_CR3 register.
+ */
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP));
CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL));
/* set the UART/USART in IRDA mode */
@@ -2886,7 +2910,8 @@
{
/* In Multi Processor mode, the following bits must be kept cleared:
- LINEN and CLKEN bits in the USART_CR2 register,
- - IREN, SCEN and HDSEL bits in the USART_CR3 register.*/
+ - IREN, SCEN and HDSEL bits in the USART_CR3 register.
+ */
CLEAR_BIT(USARTx->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN));
CLEAR_BIT(USARTx->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN));
}
@@ -3434,7 +3459,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_IDLE(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_IDLEIE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_IDLEIE);
}
/* Legacy define */
@@ -3450,7 +3475,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_RXNE_RXFNE(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
}
/**
@@ -3461,7 +3486,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_TC(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_TCIE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TCIE);
}
/* Legacy define */
@@ -3477,7 +3502,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_TXE_TXFNF(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
}
/**
@@ -3488,7 +3513,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_PE(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_PEIE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_PEIE);
}
/**
@@ -3499,7 +3524,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_CM(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_CMIE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_CMIE);
}
/**
@@ -3510,7 +3535,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_RTO(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_RTOIE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RTOIE);
}
/**
@@ -3523,7 +3548,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_EOB(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_EOBIE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_EOBIE);
}
/**
@@ -3536,7 +3561,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_TXFE(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_TXFEIE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_TXFEIE);
}
/**
@@ -3547,7 +3572,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_RXFF(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR1, USART_CR1_RXFFIE);
+ ATOMIC_SET_BIT(USARTx->CR1, USART_CR1_RXFFIE);
}
/**
@@ -3575,7 +3600,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_ERROR(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR3, USART_CR3_EIE);
+ ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_EIE);
}
/**
@@ -3588,7 +3613,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_CTS(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR3, USART_CR3_CTSIE);
+ ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_CTSIE);
}
/**
@@ -3601,7 +3626,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_WKUP(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR3, USART_CR3_WUFIE);
+ ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_WUFIE);
}
/**
@@ -3614,7 +3639,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_TXFT(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR3, USART_CR3_TXFTIE);
+ ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TXFTIE);
}
/**
@@ -3627,7 +3652,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_TCBGT(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
+ ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
}
/**
@@ -3640,7 +3665,7 @@
*/
__STATIC_INLINE void LL_USART_EnableIT_RXFT(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR3, USART_CR3_RXFTIE);
+ ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_RXFTIE);
}
/**
@@ -3651,7 +3676,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_IDLE(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_IDLEIE);
}
/* Legacy define */
@@ -3667,7 +3692,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_RXNE_RXFNE(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXNEIE_RXFNEIE);
}
/**
@@ -3678,7 +3703,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_TC(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TCIE);
}
/* Legacy define */
@@ -3694,7 +3719,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_TXE_TXFNF(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXEIE_TXFNFIE);
}
/**
@@ -3705,7 +3730,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_PE(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_PEIE);
}
/**
@@ -3716,7 +3741,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_CM(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_CMIE);
}
/**
@@ -3727,7 +3752,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_RTO(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RTOIE);
}
/**
@@ -3740,7 +3765,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_EOB(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_EOBIE);
}
/**
@@ -3753,7 +3778,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_TXFE(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_TXFEIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_TXFEIE);
}
/**
@@ -3766,7 +3791,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_RXFF(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR1, USART_CR1_RXFFIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR1, USART_CR1_RXFFIE);
}
/**
@@ -3794,7 +3819,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_ERROR(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR3, USART_CR3_EIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_EIE);
}
/**
@@ -3807,7 +3832,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_CTS(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_CTSIE);
}
/**
@@ -3820,7 +3845,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_WKUP(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_WUFIE);
}
/**
@@ -3833,7 +3858,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_TXFT(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR3, USART_CR3_TXFTIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TXFTIE);
}
/**
@@ -3846,7 +3871,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_TCBGT(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_TCBGTIE);
}
/**
@@ -3859,7 +3884,7 @@
*/
__STATIC_INLINE void LL_USART_DisableIT_RXFT(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR3, USART_CR3_RXFTIE);
+ ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_RXFTIE);
}
/**
@@ -4093,7 +4118,7 @@
*/
__STATIC_INLINE void LL_USART_EnableDMAReq_RX(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR3, USART_CR3_DMAR);
+ ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAR);
}
/**
@@ -4104,7 +4129,7 @@
*/
__STATIC_INLINE void LL_USART_DisableDMAReq_RX(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR);
+ ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAR);
}
/**
@@ -4126,7 +4151,7 @@
*/
__STATIC_INLINE void LL_USART_EnableDMAReq_TX(USART_TypeDef *USARTx)
{
- SET_BIT(USARTx->CR3, USART_CR3_DMAT);
+ ATOMIC_SET_BIT(USARTx->CR3, USART_CR3_DMAT);
}
/**
@@ -4137,7 +4162,7 @@
*/
__STATIC_INLINE void LL_USART_DisableDMAReq_TX(USART_TypeDef *USARTx)
{
- CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT);
+ ATOMIC_CLEAR_BIT(USARTx->CR3, USART_CR3_DMAT);
}
/**
diff --git a/Inc/stm32g0xx_ll_usb.h b/Inc/stm32g0xx_ll_usb.h
index add322f..058bcf5 100644
--- a/Inc/stm32g0xx_ll_usb.h
+++ b/Inc/stm32g0xx_ll_usb.h
@@ -6,7 +6,7 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2020 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
@@ -103,12 +103,13 @@
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref USB_Core_Speed */
+ This parameter can be any value of @ref PCD_Speed/HCD_Speed
+ (HCD_SPEED_xxx, HCD_SPEED_xxx) */
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. */
uint32_t phy_itface; /*!< Select the used PHY interface.
- This parameter can be any value of @ref USB_Core_PHY */
+ This parameter can be any value of @ref PCD_PHY_Module/HCD_PHY_Module */
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
@@ -137,7 +138,7 @@
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t type; /*!< Endpoint type
- This parameter can be any value of @ref USB_EP_Type_ */
+ This parameter can be any value of @ref USB_LL_EP_Type */
uint16_t pmaadress; /*!< PMA Address
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
@@ -185,11 +186,12 @@
uint8_t ch_dir; /*!< channel direction
This parameter store the physical channel direction IN/OUT/BIDIR */
- uint8_t speed; /*!< USB Host speed.
- This parameter can be any value of @ref USB_Core_Speed_ */
+ uint8_t speed; /*!< USB Host Channel speed.
+ This parameter can be any value of @ref HCD_Device_Speed:
+ (HCD_DEVICE_SPEED_xxx) */
uint8_t ep_type; /*!< Endpoint Type.
- This parameter can be any value of @ref USB_EP_Type_ */
+ This parameter can be any value of @ref USB_LL_EP_Type */
uint16_t max_packet; /*!< Endpoint Max packet size.
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
@@ -323,7 +325,8 @@
/*Set Channel/Endpoint to the USB Register */
-#define USB_DRD_SET_CHEP(USBx, bEpChNum, wRegValue) (*(__IO uint32_t *)(&(USBx)->CHEP0R + (bEpChNum)) = (uint32_t)(wRegValue))
+#define USB_DRD_SET_CHEP(USBx, bEpChNum, wRegValue) (*(__IO uint32_t *)\
+ (&(USBx)->CHEP0R + (bEpChNum)) = (uint32_t)(wRegValue))
/*Get Channel/Endpoint from the USB Register */
#define USB_DRD_GET_CHEP(USBx, bEpChNum) (*(__IO uint32_t *)(&(USBx)->CHEP0R + (bEpChNum)))
@@ -464,8 +467,11 @@
* @param bEpChNum Endpoint Number.
* @retval status
*/
-#define USB_DRD_GET_CHEP_TX_STATUS(USBx, bEpChNum) ((uint16_t)USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_DRD_CHEP_TX_STTX)
-#define USB_DRD_GET_CHEP_RX_STATUS(USBx, bEpChNum) ((uint16_t)USB_DRD_GET_CHEP((USBx), (bEpChNum)) & USB_DRD_CHEP_RX_STRX)
+#define USB_DRD_GET_CHEP_TX_STATUS(USBx, bEpChNum) ((uint16_t)USB_DRD_GET_CHEP((USBx), (bEpChNum))\
+ & USB_DRD_CHEP_TX_STTX)
+
+#define USB_DRD_GET_CHEP_RX_STATUS(USBx, bEpChNum) ((uint16_t)USB_DRD_GET_CHEP((USBx), (bEpChNum))\
+ & USB_DRD_CHEP_RX_STRX)
/**
@@ -695,8 +701,11 @@
} while(0)
-#define USB_DRD_SET_CHEP_RX_DBUF0_CNT(USBx, bEpChNum, wCount) USB_DRD_SET_CHEP_CNT_RX_REG(((USB_DRD_PMA_BUFF + (bEpChNum))->TXBD), (wCount))
-#define USB_DRD_SET_CHEP_RX_CNT(USBx, bEpChNum, wCount) USB_DRD_SET_CHEP_CNT_RX_REG(((USB_DRD_PMA_BUFF + (bEpChNum))->RXBD), (wCount))
+#define USB_DRD_SET_CHEP_RX_DBUF0_CNT(USBx, bEpChNum, wCount) USB_DRD_SET_CHEP_CNT_RX_REG(((USB_DRD_PMA_BUFF\
+ + (bEpChNum))->TXBD), (wCount))
+
+#define USB_DRD_SET_CHEP_RX_CNT(USBx, bEpChNum, wCount) USB_DRD_SET_CHEP_CNT_RX_REG(((USB_DRD_PMA_BUFF\
+ + (bEpChNum))->RXBD), (wCount))
/**
@@ -824,7 +833,7 @@
HAL_StatusTypeDef USB_EPStartXfer(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep);
HAL_StatusTypeDef USB_EPSetStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep);
HAL_StatusTypeDef USB_EPClearStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep);
-#endif
+#endif /* HAL_PCD_MODULE_ENABLED */
HAL_StatusTypeDef USB_SetDevAddress(USB_DRD_TypeDef *USBx, uint8_t address);
HAL_StatusTypeDef USB_DevConnect(USB_DRD_TypeDef *USBx);
diff --git a/Inc/stm32g0xx_ll_utils.h b/Inc/stm32g0xx_ll_utils.h
index a791567..b7987b6 100644
--- a/Inc/stm32g0xx_ll_utils.h
+++ b/Inc/stm32g0xx_ll_utils.h
@@ -178,7 +178,7 @@
#define LL_UTILS_PACKAGETYPE_QFN32_PD 0x00000005U /*!< UFQFPN32 / LQFP32 Power Delivery (PD) package type */
#define LL_UTILS_PACKAGETYPE_QFN48 0x00000008U /*!< UFQFPN48 / LQFP488 package type */
#define LL_UTILS_PACKAGETYPE_QFP64 0x0000000CU /*!< LQPF64 package type */
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
/**
* @}
*/
@@ -274,7 +274,7 @@
return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0x1FU);
#else
return (uint32_t)(READ_REG(*((uint32_t *)PACKAGE_BASE_ADDRESS)) & 0xFU);
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
}
/**
diff --git a/LICENSE.md b/LICENSE.md
new file mode 100644
index 0000000..83285d4
--- /dev/null
+++ b/LICENSE.md
@@ -0,0 +1,27 @@
+Copyright 2018 STMicroelectronics.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+this list of conditions and the following disclaimer in the documentation and/or
+other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its contributors
+may be used to endorse or promote products derived from this software without
+specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
\ No newline at end of file
diff --git a/License.md b/License.md
deleted file mode 100644
index d2ca26d..0000000
--- a/License.md
+++ /dev/null
@@ -1,3 +0,0 @@
-# Copyright (c) 2018 STMicroelectronics
-
-This software component is licensed by STMicroelectronics under the **BSD 3-Clause** license. You may not use this file except in compliance with this license. You may obtain a copy of the license [here](https://opensource.org/licenses/BSD-3-Clause).
\ No newline at end of file
diff --git a/README.md b/README.md
index ed9334e..e8de06c 100644
--- a/README.md
+++ b/README.md
@@ -1,19 +1,21 @@
# STM32CubeG0 HAL Driver MCU Component
+
+
## Overview
-**STM32Cube** is an STMicroelectronics original initiative to ease the developers life by reducing efforts, time and cost.
+**STM32Cube** is an STMicroelectronics original initiative to ease developers' life by reducing efforts, time and cost.
-**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform, delivered for each STM32 series.
- * The CMSIS modules (core and device) corresponding to the ARM(tm) core implemented in this STM32 product
- * The STM32 HAL-LL drivers : an abstraction drivers layer, the API ensuring maximized portability across the STM32 portfolio
- * The BSP Drivers of each evaluation or demonstration board provided by this STM32 series
- * A consistent set of middlewares components such as RTOS, USB, FatFS, Graphics, STM32_TouchSensing_Library ...
- * A full set of software projects (basic examples, applications or demonstrations) for each board provided by this STM32 series
+**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform delivered for each STM32 series.
+ * The CMSIS modules (core and device) corresponding to the ARM(tm) core implemented in this STM32 product.
+ * The STM32 HAL-LL drivers, an abstraction layer offering a set of APIs ensuring maximized portability across the STM32 portfolio.
+ * The BSP drivers of each evaluation, demonstration or nucleo board provided for this STM32 series.
+ * A consistent set of middleware libraries such as RTOS, USB, FatFS, graphics, touch sensing library...
+ * A full set of software projects (basic examples, applications, and demonstrations) for each board provided for this STM32 series.
Two models of publication are proposed for the STM32Cube embedded software:
- * The monolithic **MCU Package** : all STM32Cube software modules of one STM32 series are present (Drivers, Middlewares, Projects, Utilities) in the repo (usual name **STM32Cubexx**, xx corresponding to the STM32 series)
- * The **MCU component** : progressively from November 2019, each STM32Cube software module being part of the STM32Cube MCU Package, will be delivered as an individual repo, allowing the user to select and get only the required software functions.
+ * The monolithic **MCU Package**: all STM32Cube software modules of one STM32 series are present (Drivers, Middleware, Projects, Utilities) in the repository (usual name **STM32Cubexx**, xx corresponding to the STM32 series).
+ * The **MCU component**: each STM32Cube software module being part of the STM32Cube MCU Package, is delivered as an individual repository, allowing the user to select and get only the required software functions.
## Description
@@ -36,17 +38,18 @@
It is **crucial** that you use a consistent set of versions for the CMSIS Core - CMSIS Device - HAL, as mentioned in this table.
-HAL Driver G0 | CMSIS Device G0 | CMSIS Core | Was delivered in the full MCU package
-------------- | --------------- | ---------- | -------------------------------------
-Tag v1.2.0 | Tag v1.2.0 | Tag v4.5_cm0 | Tag v1.2.0 (and following, if any, till next new tag)
-Tag v1.3.0 | Tag v1.3.0 | Tag v5.4.0_cm0 | Tag v1.3.0 (and following, if any, till next new tag)
-Tag v1.4.0 | Tag v1.4.0 | Tag v5.6.0_cm0 | Tag v1.4.0 (and following, if any, till next new tag)
-Tag v1.4.1 | Tag v1.4.0 | Tag v5.6.0_cm0 | Tag v1.4.1 (and following, if any, till next new tag)
+HAL Driver G0 | CMSIS Device G0 | CMSIS Core | Was delivered in the full MCU package
+------------- | --------------- | -------------- | -----------------------------------------------------
+Tag v1.2.0 | Tag v1.2.0 | Tag v4.5_cm0 | Tag v1.2.0 (and following, if any, till next new tag)
+Tag v1.3.0 | Tag v1.3.0 | Tag v5.4.0_cm0 | Tag v1.3.0 (and following, if any, till next new tag)
+Tag v1.4.0 | Tag v1.4.0 | Tag v5.6.0_cm0 | Tag v1.4.0 (and following, if any, till next new tag)
+Tag v1.4.1 | Tag v1.4.0 | Tag v5.6.0_cm0 | Tag v1.4.1 (and following, if any, till next new tag)
+Tag v1.4.2 | Tag v1.4.1 | Tag v5.6.0_cm0 | Tag v1.5.0 (and following, if any, till next new tag)
The full **STM32CubeG0** MCU package is available [here](https://github.com/STMicroelectronics/STM32CubeG0).
## Troubleshooting
-If you have any issue with the **Software content** of this repo, you can [file an issue on Github](https://github.com/STMicroelectronics/stm32g0xx_hal_driver/issues/new).
+If you have any issue with the **software content** of this repository, you can file an issue [here](https://github.com/STMicroelectronics/stm32g0xx_hal_driver/issues/new).
-For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus).
\ No newline at end of file
+For any other question related to the product, the tools, the environment, you can submit a topic on the [ST Community/STM32 MCUs forum](https://community.st.com/s/group/0F90X000000AXsASAW/stm32-mcus).
diff --git a/Release_Notes.html b/Release_Notes.html
index 7e99de4..1150f2b 100644
--- a/Release_Notes.html
+++ b/Release_Notes.html
@@ -5,11 +5,14 @@
<meta name="generator" content="pandoc" />
<meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
<title>Release Notes for STM32G0xx HAL Drivers Package</title>
- <style type="text/css">
- code{white-space: pre-wrap;}
- span.smallcaps{font-variant: small-caps;}
- span.underline{text-decoration: underline;}
- div.column{display: inline-block; vertical-align: top; width: 50%;}
+ <style>
+ code{white-space: pre-wrap;}
+ span.smallcaps{font-variant: small-caps;}
+ span.underline{text-decoration: underline;}
+ div.column{display: inline-block; vertical-align: top; width: 50%;}
+ div.hanging-indent{margin-left: 1.5em; text-indent: -1.5em;}
+ ul.task-list{list-style: none;}
+ .display.math{display: block; text-align: center; margin: 0.5rem auto;}
</style>
<link rel="stylesheet" href="_htmresc/mini-st_2020.css" />
<!--[if lt IE 9]>
@@ -39,12 +42,170 @@
<li>Full features coverage of the all the supported peripherals.</li>
</ul>
</div>
-<div class="col-sm-12 col-lg-8">
-<h1 id="update-history">Update History</h1>
+<section id="update-history" class="col-sm-12 col-lg-8">
+<h1>Update History</h1>
<div class="collapse">
-<input type="checkbox" id="collapse-section6" checked aria-hidden="true"> <label for="collapse-section6" aria-hidden="true">V1.4.1 / 25-February-2021</label>
+<input type="checkbox" id="collapse-section5" checked aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">V1.4.2 / 17-Juin-2021</label>
<div>
<h2 id="main-changes">Main Changes</h2>
+<h3 id="maintenance-release">Maintenance release</h3>
+<ul>
+<li><p>General updates to fix known defects and enhancements implementation.</p></li>
+<li><p><strong>HAL/LL Drivers</strong> updates</p></li>
+<li><p><strong>HAL CEC</strong> update</p>
+<ul>
+<li>Update HAL_CEC_IRQHandler() API to avoid appending an extra byte to the end of a message.</li>
+</ul></li>
+<li><p><strong>HAL/LL SPI</strong> update</p>
+<ul>
+<li>Fix MISRA-C 2012 Rule-13.2 error.</li>
+<li>Update to set the FRXTH bit for 8bit data in LL_SPI_Init() API.</li>
+<li>Update LL_SPI_TransmitData8() API to avoid casting the result to 8 bits.</li>
+</ul></li>
+<li><p><strong>HAL RCC</strong> update</p>
+<ul>
+<li>Update to fix HSI48 flag definition. Add missing STM32G0C1 specific MCO prescaler values to docstring. Update GetOscConfig() API to correct wrong HSIDiv value.</li>
+<li>Add new API HAL_RCC_GetResetSource() to get all reset sources and clear flags for next reset.</li>
+</ul></li>
+<li><p><strong>HAL DMA</strong> update</p>
+<ul>
+<li>Update HAL_DMA_IRQHandler() API to set the DMA state before unlocking access to the DMA handle.</li>
+</ul></li>
+<li><p><strong>HAL FLASH</strong> update</p>
+<ul>
+<li>Clarification comment of the program type added to the HAL_FLASH_Program() and HAL_FLASH_Program_IT() APIs.</li>
+</ul></li>
+<li><p><strong>HAL EXTI</strong> update</p>
+<ul>
+<li>Update HAL_EXTI_GetConfigLine() API to set default configuration value of Trigger and GPIOSel before checking each corresponding registers.</li>
+</ul></li>
+<li><p><strong>HAL/LL RTC</strong> update</p>
+<ul>
+<li>Fix an error in IS_LL_RTC_MONTH leading to assert failure.</li>
+<li>New APIs to subtract or add one hour to the calendar in one single operation without going through the initialization procedure (Daylight Saving):
+<ul>
+<li>HAL_RTC_DST_Add1Hour()</li>
+<li>HAL_RTC_DST_Sub1Hour()</li>
+<li>HAL_RTC_DST_SetStoreOperation()</li>
+<li>HAL_RTC_DST_ClearStoreOperation()</li>
+<li>HAL_RTC_DST_ReadStoreOperation()</li>
+</ul></li>
+<li>DayLightSaving and StoreOperation interfaces from RTC_TimeTypeDef type and __HAL_RTC_DAYLIGHT_SAVING_TIME_ADD1H() and __HAL_RTC_DAYLIGHT_SAVING_TIME_SUB1H() macros are now deprecated.</li>
+</ul></li>
+<li><p><strong>HAL CRYP</strong> update</p>
+<ul>
+<li>Update HAL_CRYP_SetConfig() and HAL_CRYP_GetConfig() APIs to set/get the continent of KeyIVConfigSkip correctly. Resolve interrupt mode related GCM decryption issue causing wrong computation of decryption size. Update HAL_CRYP_InCpltCallback() API to fix an incorrect condition call at resumption time.</li>
+<li>Update CRYP_AESCCM_Process_IT() API to manage header lengths in bytes or words when header length is less than 16 bytes.</li>
+</ul></li>
+<li><p><strong>HAL COMP</strong> update</p>
+<ul>
+<li>Update wait_loop_index computation so delay in us is always multiplicated by at least value “1”.</li>
+</ul></li>
+<li><p><strong>HAL IWDG</strong> update</p>
+<ul>
+<li>Update HAL_IWDG_Init() API in order to fix HAL_GetTick() timeout vulnerability issue.</li>
+</ul></li>
+<li><p><strong>HAL/LL RCC</strong> update</p>
+<ul>
+<li>Private functions made static.</li>
+<li>Add missing STM32G0C1 specific MCO prescaler values to docstring.</li>
+<li>Update to fix HSI48 flag definition.</li>
+<li>Update GetOscConfig() API to correct wrong HSIDiv value.</li>
+<li>Add LSI startup time in default IWDG timeout calculation (HAL_IWDG_DEFAULT_TIMEOUT).</li>
+<li>Add new API HAL_RCC_GetResetSource() to get all reset sources and clear flags for next reset.</li>
+</ul></li>
+<li><p><strong>HAL GPIO</strong> update</p>
+<ul>
+<li>Update HAL_GPIO_Init() API to avoid the configuration of PUPDR register when Analog mode is selected.</li>
+</ul></li>
+<li><p><strong>HAL I2C</strong> update</p>
+<ul>
+<li>Update I2C_IsAcknowledgeFailed() API to avoid I2C in busy state if NACK received after transmitting register address.</li>
+</ul></li>
+<li><p><strong>HAL SMBUS</strong> update</p>
+<ul>
+<li>Add support for Fast Mode Plus to be SMBUS Rev3 compliant.
+<ul>
+<li>Add HAL_SMBUSEx_EnableFastModePlus() and HAL_SMBUSEx_DisableFastModePlus() APIs to manage Fm+.</li>
+</ul></li>
+</ul></li>
+<li><p><strong>HAL RNG</strong> update</p>
+<ul>
+<li>Update timeout mechanism to avoid false timeout detection in case of preemption.</li>
+</ul></li>
+<li><p><strong>HAL UART</strong> update</p>
+<ul>
+<li>Update HAL_UART_IRQHandler() API to handle receiver timeout interrupt.</li>
+<li>Update UART receive processes (IT and DMA) to handle the UART receive’s timeout interrupt.</li>
+<li>Fix erroneous UART’s handle state in case of error returned after DMA reception start within UART_Start_Receive_DMA().</li>
+<li>Correction on UART ReceptionType management in case of ReceptionToIdle API are called from RxEvent callback.</li>
+<li>Handling of UART concurrent register access in case of race condition between Tx and Rx transfers (HAL UART and LL LPUART).</li>
+<li>Remove an invalid FIFO mode configuration from UART_SetConfig() as it is not is not member of UART_InitTypeDef Structure.</li>
+</ul></li>
+<li><p><strong>HAL/LL USART</strong> update</p>
+<ul>
+<li>Remove useless check on maximum BRR value by removing IS_LL_USART_BRR_MAX() macro.</li>
+<li>LL_USART_ClockInit now supports clock phase and clock polarity configuration for SPI_Slave mode.</li>
+<li>Handling of USART concurrent register access in case of race condition between Tx and Rx transfers.</li>
+<li>Optimize stack usage for multiple APIs.</li>
+</ul></li>
+<li><p><strong>HAL/LL TIM</strong> update</p>
+<ul>
+<li>Update LL_TIM_GetCounterMode() API to return the correct counter mode.</li>
+<li>Correct reversed description of TIM_LL_EC_ONEPULSEMODE One Pulse Mode.</li>
+<li>Update HAL_TIMEx_OnePulseN_Start() and HAL_TIMEx_OnePulseN_Stop() APIs (polling and IT mode) to take into consideration all OutputChannel parameters.</li>
+<li>Update timeout mechanism to avoid false timeout detection in case of preemption.</li>
+<li>Update input capture measurement in DMA mode to avoid zero return values at high frequencies.</li>
+</ul></li>
+<li><p><strong>HAL LPTIM</strong> update</p>
+<ul>
+<li>Update HAL_LPTIM_Init() API implementation to configure digital filter for external clock when LPTIM is clocked by an internal clock source.</li>
+</ul></li>
+<li><p><strong>HAL IWDG</strong> update</p>
+<ul>
+<li>Update HAL_IWDG_Init() API in order to fix HAL_GetTick() timeout vulnerability issue.</li>
+<li>Add LSI startup time in default IWDG timeout calculation (HAL_IWDG_DEFAULT_TIMEOUT).</li>
+</ul></li>
+<li><p><strong>HAL/LL ADC</strong> update</p>
+<ul>
+<li>Update wait_loop_index computation so delay in us is always multiplicated by at least value “1”.</li>
+<li>Fix wrong internal regulator stabilization time to be aligned with the datasheet: 20us instead of 10us.</li>
+</ul></li>
+<li><p><strong>HAL USB</strong> update</p>
+<ul>
+<li>Add fix transfer complete for IN Interrupt transaction in single buffer mode.</li>
+<li>stm32g0xx_hal_hcd.h/c updated to add #if #endif pre-processor directives for devices that do not support USB DRD feature.</li>
+<li>Add fix transfer complete for IN Interrupt transaction in single buffer mode.</li>
+</ul></li>
+</ul>
+<h2 id="known-limitations">Known limitations</h2>
+<ul>
+<li>USB HAL limitation: Double buffer mode is not functional with isochronous data transfers in host mode.</li>
+</ul>
+<h2 id="development-toolchains-and-compilers">Development Toolchains and Compilers</h2>
+<ul>
+<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.50.9</li>
+<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.31</li>
+<li>STM32CubeIDE toolchain v1.7.0</li>
+</ul>
+<h2 id="supported-devices-and-boards">Supported Devices and boards</h2>
+<p>Supported Devices:</p>
+<ul>
+<li>STM32G0C1xx, STM32G0B1xx, STM32G0B0xx</li>
+<li>STM32G061xx, STM32G051xx, STM32G050xx</li>
+<li>STM32G081xx, STM32G071xx, STM32G070xx</li>
+<li>STM32G041xx, STM32G031xx, STM32G030xx ## Backward Compatibility</li>
+</ul>
+<p>This release is compatible with the previous versions.</p>
+<h2 id="dependencies">Dependencies</h2>
+<p><br />
+</p>
+</div>
+</div>
+<div class="collapse">
+<input type="checkbox" id="collapse-section6" aria-hidden="true"> <label for="collapse-section6" aria-hidden="true">V1.4.1 / 25-February-2021</label>
+<div>
+<h2 id="main-changes-1">Main Changes</h2>
<h3 id="patch-release">Patch release</h3>
<p>Patch release of <strong>HAL and Low Layer</strong> drivers</p>
<p><strong>Additional features</strong></p>
@@ -60,17 +221,17 @@
</tr>
</tbody>
</table>
-<h2 id="known-limitations">Known limitations</h2>
+<h2 id="known-limitations-1">Known limitations</h2>
<ul>
<li>USB HAL limitation: Double buffer mode is not functional with isochronous data transfers in host mode.</li>
</ul>
-<h2 id="development-toolchains-and-compilers">Development Toolchains and Compilers</h2>
+<h2 id="development-toolchains-and-compilers-1">Development Toolchains and Compilers</h2>
<ul>
<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.30.1</li>
<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.29</li>
<li>STM32CubeIDE toolchain v1.5.0</li>
</ul>
-<h2 id="supported-devices-and-boards">Supported Devices and boards</h2>
+<h2 id="supported-devices-and-boards-1">Supported Devices and boards</h2>
<p>Supported Devices:</p>
<ul>
<li>STM32G0C1xx, STM32G0B1xx, STM32G0B0xx</li>
@@ -80,7 +241,7 @@
</ul>
<h2 id="backward-compatibility">Backward Compatibility</h2>
<p>This release is compatible with the previous versions.</p>
-<h2 id="dependencies">Dependencies</h2>
+<h2 id="dependencies-1">Dependencies</h2>
<p><br />
</p>
</div>
@@ -88,7 +249,7 @@
<div class="collapse">
<input type="checkbox" id="collapse-section5" aria-hidden="true"> <label for="collapse-section5" aria-hidden="true">V1.4.0 / 29-October-2020</label>
<div>
-<h2 id="main-changes-1">Main Changes</h2>
+<h2 id="main-changes-2">Main Changes</h2>
<h3 id="maintenance-release-and-product-update">Maintenance release and Product Update</h3>
<p><strong>Official release</strong> of HAL and Low layers drivers introducing <strong>STM32G0C1xx/STM32G0B1xx/STM32G0B0xx</strong> devices and <strong>STM32G061xx/STM32G051xx/STM32G050xx</strong> devices.</p>
<p>Maintenance release of HAL and Low layers drivers supporting STM32G041xx/STM32G031xx/STM32G030xx and STM32G081xx/STM32G071xx/STM32G070xx devices.</p>
@@ -555,17 +716,17 @@
</tr>
</tbody>
</table>
-<h2 id="known-limitations-1">Known limitations</h2>
+<h2 id="known-limitations-2">Known limitations</h2>
<ul>
<li>USB HAL limitation: Double buffer mode is not functional with isochronous data transfers in host mode.</li>
</ul>
-<h2 id="development-toolchains-and-compilers-1">Development Toolchains and Compilers</h2>
+<h2 id="development-toolchains-and-compilers-2">Development Toolchains and Compilers</h2>
<ul>
<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.30.1</li>
<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.29</li>
<li>STM32CubeIDE toolchain v1.5.0</li>
</ul>
-<h2 id="supported-devices-and-boards-1">Supported Devices and boards</h2>
+<h2 id="supported-devices-and-boards-2">Supported Devices and boards</h2>
<p>Supported Devices:</p>
<ul>
<li><strong>STM32G0C1xx, STM32G0B1xx, STM32G0B0xx</strong></li>
@@ -575,7 +736,7 @@
</ul>
<h2 id="backward-compatibility-1">Backward Compatibility</h2>
<p>This release is compatible with the previous versions.</p>
-<h2 id="dependencies-1">Dependencies</h2>
+<h2 id="dependencies-2">Dependencies</h2>
<p><br />
</p>
</div>
@@ -583,8 +744,8 @@
<div class="collapse">
<input type="checkbox" id="collapse-section4" aria-hidden="true"> <label for="collapse-section4" aria-hidden="true">V1.3.0 / 25-June-2019</label>
<div>
-<h2 id="main-changes-2">Main Changes</h2>
-<h3 id="maintenance-release">Maintenance release</h3>
+<h2 id="main-changes-3">Main Changes</h2>
+<h3 id="maintenance-release-1">Maintenance release</h3>
<p>Maintenance release of HAL and Low layers drivers supporting STM32G041xx/STM32G031xx/STM32G030xx and STM32G081xx/STM32G071xx/STM32G070xx devices.</p>
<p><strong>Fixed bugs list</strong></p>
<table>
@@ -653,13 +814,13 @@
</tr>
</tbody>
</table>
-<h2 id="development-toolchains-and-compilers-2">Development Toolchains and Compilers</h2>
+<h2 id="development-toolchains-and-compilers-3">Development Toolchains and Compilers</h2>
<ul>
<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li>
<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li>
<li>System Workbench STM32 (SW4STM32) toolchain V2.7.2</li>
</ul>
-<h2 id="supported-devices-and-boards-2">Supported Devices and boards</h2>
+<h2 id="supported-devices-and-boards-3">Supported Devices and boards</h2>
<p>Supported Devices:</p>
<ul>
<li>STM32G081xx, STM32G071xx, STM32G070xx</li>
@@ -667,13 +828,13 @@
</ul>
<h2 id="backward-compatibility-2">Backward Compatibility</h2>
<p>This release is compatible with the previous versions.</p>
-<h2 id="dependencies-2">Dependencies</h2>
+<h2 id="dependencies-3">Dependencies</h2>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section3" aria-hidden="true"> <label for="collapse-section3" aria-hidden="true">V1.2.0 / 05-April-2019</label>
<div>
-<h2 id="main-changes-3">Main Changes</h2>
+<h2 id="main-changes-4">Main Changes</h2>
<h3 id="maintenance-release-and-product-update-1">Maintenance release and product update</h3>
<p>First release of HAL and Low layers drivers to introduce support of <strong>STM32G041xx/STM32G031xx/STM32G030xx devices</strong>.</p>
<p>Maintenance release of HAL and Low layers drivers supporting STM32G081xx/STM32G071xx/STM32G070xx devices.</p>
@@ -760,13 +921,13 @@
</tr>
</tbody>
</table>
-<h2 id="development-toolchains-and-compilers-3">Development Toolchains and Compilers</h2>
+<h2 id="development-toolchains-and-compilers-4">Development Toolchains and Compilers</h2>
<ul>
<li>IAR Embedded Workbench for ARM (EWARM) toolchain V8.20.2</li>
<li>RealView Microcontroller Development Kit (MDK-ARM) toolchain V5.25</li>
<li>System Workbench STM32 (SW4STM32) toolchain V2.7.2</li>
</ul>
-<h2 id="supported-devices-and-boards-3">Supported Devices and boards</h2>
+<h2 id="supported-devices-and-boards-4">Supported Devices and boards</h2>
<p>Supported Devices:</p>
<ul>
<li>STM32G081xx, STM32G071xx, STM32G070xx</li>
@@ -774,13 +935,13 @@
</ul>
<h2 id="backward-compatibility-3">Backward Compatibility</h2>
<p>This release is compatible with the previous versions.</p>
-<h2 id="dependencies-3">Dependencies</h2>
+<h2 id="dependencies-4">Dependencies</h2>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section2" aria-hidden="true"> <label for="collapse-section2" aria-hidden="true">V1.1.0 / 06-February-2019</label>
<div>
-<h2 id="main-changes-4">Main Changes</h2>
+<h2 id="main-changes-5">Main Changes</h2>
<h3 id="maintenance-release-and-product-update-2">Maintenance release and product update</h3>
<p>Maintenance release of HAL and Low layers drivers to support STM32G071xx/STM32G081xx/STM32G070xx devices.</p>
<p><strong>Additional features</strong></p>
@@ -869,7 +1030,7 @@
</tr>
</tbody>
</table>
-<h2 id="supported-devices-and-boards-4">Supported Devices and boards</h2>
+<h2 id="supported-devices-and-boards-5">Supported Devices and boards</h2>
<p>Supported Devices:</p>
<ul>
<li>STM32G0<strong>81</strong>xx</li>
@@ -878,26 +1039,26 @@
</ul>
<h2 id="backward-compatibility-4">Backward Compatibility</h2>
<p>This release is compatible with the previous versions.</p>
-<h2 id="dependencies-4">Dependencies</h2>
+<h2 id="dependencies-5">Dependencies</h2>
</div>
</div>
<div class="collapse">
<input type="checkbox" id="collapse-section1" aria-hidden="true"> <label for="collapse-section1" aria-hidden="true">V1.0.0 / 26-October-2018</label>
<div>
-<h2 id="main-changes-5">Main Changes</h2>
+<h2 id="main-changes-6">Main Changes</h2>
<h3 id="first-release">First release</h3>
<p>First official release of HAL and Low layers drivers to support STM32G071xx/STM32G081xx/STM32G070xx</p>
-<h2 id="supported-devices-and-boards-5">Supported Devices and boards</h2>
+<h2 id="supported-devices-and-boards-6">Supported Devices and boards</h2>
<p>Supported Devices:</p>
<ul>
<li>STM32G0<strong>81</strong>xx</li>
<li>STM32G0<strong>71</strong>xx</li>
<li>STM32G0<strong>70</strong>xx</li>
</ul>
-<h2 id="dependencies-5">Dependencies</h2>
+<h2 id="dependencies-6">Dependencies</h2>
</div>
</div>
-</div>
+</section>
</div>
<footer class="sticky">
<p>For complete documentation on <strong>STM32 Microcontrollers</strong>, visit: <a href="http://www.st.com/STM32">http://www.st.com/STM32</a></p>
diff --git a/Src/stm32g0xx_hal.c b/Src/stm32g0xx_hal.c
index eb3ab8f..e2208fa 100644
--- a/Src/stm32g0xx_hal.c
+++ b/Src/stm32g0xx_hal.c
@@ -57,7 +57,7 @@
*/
#define __STM32G0xx_HAL_VERSION_MAIN (0x01U) /*!< [31:24] main version */
#define __STM32G0xx_HAL_VERSION_SUB1 (0x04U) /*!< [23:16] sub1 version */
-#define __STM32G0xx_HAL_VERSION_SUB2 (0x01U) /*!< [15:8] sub2 version */
+#define __STM32G0xx_HAL_VERSION_SUB2 (0x02U) /*!< [15:8] sub2 version */
#define __STM32G0xx_HAL_VERSION_RC (0x00U) /*!< [7:0] release candidate */
#define __STM32G0xx_HAL_VERSION ((__STM32G0xx_HAL_VERSION_MAIN << 24U)\
|(__STM32G0xx_HAL_VERSION_SUB1 << 16U)\
diff --git a/Src/stm32g0xx_hal_adc.c b/Src/stm32g0xx_hal_adc.c
index b732a54..a4c2053 100644
--- a/Src/stm32g0xx_hal_adc.c
+++ b/Src/stm32g0xx_hal_adc.c
@@ -19,6 +19,18 @@
* Other functions (extended functions) are available in file
* "stm32g0xx_hal_adc_ex.c".
*
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
@verbatim
==============================================================================
##### ADC peripheral features #####
@@ -275,17 +287,6 @@
@endverbatim
******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2018 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
@@ -415,7 +416,12 @@
assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon1));
assert_param(IS_ADC_SAMPLE_TIME(hadc->Init.SamplingTimeCommon2));
assert_param(IS_FUNCTIONAL_STATE(hadc->Init.OversamplingMode));
-
+ if (hadc->Init.OversamplingMode == ENABLE)
+ {
+ assert_param(IS_ADC_OVERSAMPLING_RATIO(hadc->Init.Oversampling.Ratio));
+ assert_param(IS_ADC_RIGHT_BIT_SHIFT(hadc->Init.Oversampling.RightBitShift));
+ assert_param(IS_ADC_TRIGGERED_OVERSAMPLING_MODE(hadc->Init.Oversampling.TriggeredMode));
+ }
assert_param(IS_ADC_TRIGGER_FREQ(hadc->Init.TriggerFrequencyMode));
if (hadc->Init.ScanConvMode != ADC_SCAN_DISABLE)
@@ -475,7 +481,7 @@
/* Note: Variable divided by 2 to compensate partially */
/* CPU processing cycles, scaling in us split to not */
/* exceed 32 bits register capacity and handle low frequency. */
- wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL)));
+ wait_loop_index = ((LL_ADC_DELAY_INTERNAL_REGUL_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
while (wait_loop_index != 0UL)
{
wait_loop_index--;
@@ -530,7 +536,7 @@
/* function on the fly (update of a parameter of ADC_InitTypeDef */
/* without needing to reconfigure all other ADC groups/channels */
/* parameters): */
- /* - internal measurement paths: Vbat, temperature sensor, Vref */
+ /* - internal measurement paths (VrefInt, ...) */
/* (set into HAL_ADC_ConfigChannel() ) */
/* Configuration of ADC resolution */
@@ -539,15 +545,17 @@
hadc->Init.Resolution);
tmpCFGR2 |= ((hadc->Init.ClockPrescaler & ADC_CFGR2_CKMODE) |
- hadc->Init.Oversampling.Ratio |
- hadc->Init.Oversampling.RightBitShift |
- hadc->Init.Oversampling.TriggeredMode |
hadc->Init.TriggerFrequencyMode
);
if (hadc->Init.OversamplingMode == ENABLE)
{
- SET_BIT(tmpCFGR2, ADC_CFGR2_OVSE);
+ tmpCFGR2 |= (ADC_CFGR2_OVSE |
+ (hadc->Init.ClockPrescaler & ADC_CFGR2_CKMODE) |
+ hadc->Init.Oversampling.Ratio |
+ hadc->Init.Oversampling.RightBitShift |
+ hadc->Init.Oversampling.TriggeredMode
+ );
}
MODIFY_REG(hadc->Instance->CFGR2,
@@ -747,7 +755,6 @@
tmp_hal_status = HAL_ERROR;
}
- /* Return function status */
return tmp_hal_status;
}
@@ -763,9 +770,6 @@
* bypassed without error reporting: it can be the intended behavior in
* case of reset of a single ADC while the other ADCs sharing the same
* common group is still running.
- * @note By default, HAL_ADC_DeInit() set ADC in mode deep power-down:
- * this saves more power by reducing leakage currents
- * and is particularly interesting before entering MCU low-power modes.
* @param hadc ADC handle
* @retval HAL status
*/
@@ -857,12 +861,10 @@
/* ========== Hard reset ADC peripheral ========== */
/* Performs a global reset of the entire ADC peripheral: ADC state is */
/* forced to a similar state after device power-on. */
- /* If needed, copy-paste and uncomment the following reset code into */
- /* function "void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc)": */
- /* */
- /* __HAL_RCC_ADC1_FORCE_RESET() */
- /* __HAL_RCC_ADC1_RELEASE_RESET() */
-
+ /* Note: A possible implementation is to add RCC bus reset of ADC */
+ /* (for example, using macro */
+ /* __HAL_RCC_ADC..._FORCE_RESET()/..._RELEASE_RESET()/..._CLK_DISABLE()) */
+ /* in function "void HAL_ADC_MspDeInit(ADC_HandleTypeDef *hadc)": */
#if (USE_HAL_ADC_REGISTER_CALLBACKS == 1)
if (hadc->MspDeInitCallback == NULL)
{
@@ -885,10 +887,8 @@
/* Set ADC state */
hadc->State = HAL_ADC_STATE_RESET;
- /* Process unlocked */
__HAL_UNLOCK(hadc);
- /* Return function status */
return tmp_hal_status;
}
@@ -1191,7 +1191,6 @@
/* Perform ADC enable and conversion start if no conversion is on going */
if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL)
{
- /* Process locked */
__HAL_LOCK(hadc);
/* Enable the ADC peripheral */
@@ -1229,7 +1228,6 @@
}
else
{
- /* Process unlocked */
__HAL_UNLOCK(hadc);
}
}
@@ -1238,7 +1236,6 @@
tmp_hal_status = HAL_BUSY;
}
- /* Return function status */
return tmp_hal_status;
}
@@ -1258,7 +1255,6 @@
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
- /* Process locked */
__HAL_LOCK(hadc);
/* 1. Stop potential conversion on going, on ADC group regular */
@@ -1280,10 +1276,8 @@
}
}
- /* Process unlocked */
__HAL_UNLOCK(hadc);
- /* Return function status */
return tmp_hal_status;
}
@@ -1308,7 +1302,7 @@
HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef *hadc, uint32_t Timeout)
{
uint32_t tickstart;
- uint32_t tmp_Flag_End;
+ uint32_t tmp_flag_end;
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
@@ -1316,7 +1310,7 @@
/* If end of conversion selected to end of sequence conversions */
if (hadc->Init.EOCSelection == ADC_EOC_SEQ_CONV)
{
- tmp_Flag_End = ADC_FLAG_EOS;
+ tmp_flag_end = ADC_FLAG_EOS;
}
/* If end of conversion selected to end of unitary conversion */
else /* ADC_EOC_SINGLE_CONV */
@@ -1336,7 +1330,7 @@
}
else
{
- tmp_Flag_End = (ADC_FLAG_EOC);
+ tmp_flag_end = (ADC_FLAG_EOC);
}
}
@@ -1344,20 +1338,23 @@
tickstart = HAL_GetTick();
/* Wait until End of unitary conversion or sequence conversions flag is raised */
- while ((hadc->Instance->ISR & tmp_Flag_End) == 0UL)
+ while ((hadc->Instance->ISR & tmp_flag_end) == 0UL)
{
/* Check if timeout is disabled (set to infinite wait) */
if (Timeout != HAL_MAX_DELAY)
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL))
{
- /* Update ADC state machine to timeout */
- SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
+ /* New check to avoid false timeout detection in case of preemption */
+ if ((hadc->Instance->ISR & tmp_flag_end) == 0UL)
+ {
+ /* Update ADC state machine to timeout */
+ SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
+ __HAL_UNLOCK(hadc);
- return HAL_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
}
}
}
@@ -1451,13 +1448,16 @@
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0UL))
{
- /* Update ADC state machine to timeout */
- SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
+ /* New check to avoid false timeout detection in case of preemption */
+ if (__HAL_ADC_GET_FLAG(hadc, EventType) == 0UL)
+ {
+ /* Update ADC state machine to timeout */
+ SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
+ __HAL_UNLOCK(hadc);
- return HAL_TIMEOUT;
+ return HAL_TIMEOUT;
+ }
}
}
}
@@ -1569,7 +1569,6 @@
/* Perform ADC enable and conversion start if no conversion is on going */
if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL)
{
- /* Process locked */
__HAL_LOCK(hadc);
/* Enable the ADC peripheral */
@@ -1632,7 +1631,6 @@
}
else
{
- /* Process unlocked */
__HAL_UNLOCK(hadc);
}
@@ -1642,7 +1640,6 @@
tmp_hal_status = HAL_BUSY;
}
- /* Return function status */
return tmp_hal_status;
}
@@ -1660,7 +1657,6 @@
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
- /* Process locked */
__HAL_LOCK(hadc);
/* 1. Stop potential conversion on going, on ADC group regular */
@@ -1686,10 +1682,8 @@
}
}
- /* Process unlocked */
__HAL_UNLOCK(hadc);
- /* Return function status */
return tmp_hal_status;
}
@@ -1713,7 +1707,6 @@
/* Perform ADC enable and conversion start if no conversion is on going */
if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL)
{
- /* Process locked */
__HAL_LOCK(hadc);
/* Specific case for first call occurrence of this function (DMA transfer */
@@ -1790,7 +1783,6 @@
tmp_hal_status = HAL_BUSY;
}
- /* Return function status */
return tmp_hal_status;
}
@@ -1808,7 +1800,6 @@
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
- /* Process locked */
__HAL_LOCK(hadc);
/* 1. Stop potential ADC group regular conversion on going */
@@ -1859,10 +1850,8 @@
CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN);
}
- /* Process unlocked */
__HAL_UNLOCK(hadc);
- /* Return function status */
return tmp_hal_status;
}
@@ -2099,7 +2088,7 @@
/* ========== Check channel configuration ready flag ========== */
if (((tmp_isr & ADC_FLAG_CCRDY) == ADC_FLAG_CCRDY) && ((tmp_ier & ADC_IT_CCRDY) == ADC_IT_CCRDY))
{
- /* Level out of window 1 callback */
+ /* Channel configuration ready callback */
HAL_ADCEx_ChannelConfigReadyCallback(hadc);
/* Clear ADC analog watchdog flag */
@@ -2207,10 +2196,10 @@
* The setting of these parameters is conditioned to ADC state:
* Refer to comments of structure "ADC_ChannelConfTypeDef".
* @param hadc ADC handle
- * @param sConfig Structure of ADC channel assigned to ADC group regular.
+ * @param pConfig Structure of ADC channel assigned to ADC group regular.
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *sConfig)
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef *hadc, ADC_ChannelConfTypeDef *pConfig)
{
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
uint32_t tmp_config_internal_channel;
@@ -2218,22 +2207,21 @@
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
- assert_param(IS_ADC_CHANNEL(sConfig->Channel));
- assert_param(IS_ADC_SAMPLING_TIME_COMMON(sConfig->SamplingTime));
+ assert_param(IS_ADC_CHANNEL(pConfig->Channel));
+ assert_param(IS_ADC_SAMPLING_TIME_COMMON(pConfig->SamplingTime));
if ((hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED) ||
(hadc->Init.ScanConvMode == ADC_SCAN_SEQ_FIXED_BACKWARD))
{
- assert_param(IS_ADC_REGULAR_RANK_SEQ_FIXED(sConfig->Rank));
+ assert_param(IS_ADC_REGULAR_RANK_SEQ_FIXED(pConfig->Rank));
}
else
{
assert_param(IS_ADC_REGULAR_NB_CONV(hadc->Init.NbrOfConversion));
- assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank));
+ assert_param(IS_ADC_REGULAR_RANK(pConfig->Rank));
}
- /* Process locked */
__HAL_LOCK(hadc);
/* Parameters update conditioned to ADC state: */
@@ -2251,7 +2239,7 @@
/* Otherwise (sequencer set to fully configurable or to to not fully */
/* configurable with channel rank to be set), configure the selected */
/* channel. */
- if (sConfig->Rank != ADC_RANK_NONE)
+ if (pConfig->Rank != ADC_RANK_NONE)
{
/* Regular sequence configuration */
/* Note: ADC channel configuration requires few ADC clock cycles */
@@ -2264,7 +2252,7 @@
{
/* Sequencer set to not fully configurable: */
/* Set the channel by enabling the corresponding bitfield. */
- LL_ADC_REG_SetSequencerChAdd(hadc->Instance, sConfig->Channel);
+ LL_ADC_REG_SetSequencerChAdd(hadc->Instance, pConfig->Channel);
}
else
{
@@ -2273,21 +2261,21 @@
/* Memorize the channel set into variable in HAL ADC handle */
MODIFY_REG(hadc->ADCGroupRegularSequencerRanks,
- ADC_CHSELR_SQ1 << (sConfig->Rank & 0x1FUL),
- __LL_ADC_CHANNEL_TO_DECIMAL_NB(sConfig->Channel) << (sConfig->Rank & 0x1FUL));
+ ADC_CHSELR_SQ1 << (pConfig->Rank & 0x1FUL),
+ __LL_ADC_CHANNEL_TO_DECIMAL_NB(pConfig->Channel) << (pConfig->Rank & 0x1FUL));
/* If the selected rank is below ADC group regular sequencer length, */
/* apply the configuration in ADC register. */
/* Note: Otherwise, configuration is not applied. */
/* To apply it, parameter'NbrOfConversion' must be increased. */
- if (((sConfig->Rank >> 2UL) + 1UL) <= hadc->Init.NbrOfConversion)
+ if (((pConfig->Rank >> 2UL) + 1UL) <= hadc->Init.NbrOfConversion)
{
- LL_ADC_REG_SetSequencerRanks(hadc->Instance, sConfig->Rank, sConfig->Channel);
+ LL_ADC_REG_SetSequencerRanks(hadc->Instance, pConfig->Rank, pConfig->Channel);
}
}
/* Set sampling time of the selected ADC channel */
- LL_ADC_SetChannelSamplingTime(hadc->Instance, sConfig->Channel, sConfig->SamplingTime);
+ LL_ADC_SetChannelSamplingTime(hadc->Instance, pConfig->Channel, pConfig->SamplingTime);
/* Management of internal measurement channels: VrefInt/TempSensor/Vbat */
/* internal measurement paths enable: If internal channel selected, */
@@ -2295,13 +2283,13 @@
/* Note: these internal measurement paths can be disabled using */
/* HAL_ADC_DeInit() or removing the channel from sequencer with */
/* channel configuration parameter "Rank". */
- if (__LL_ADC_IS_CHANNEL_INTERNAL(sConfig->Channel))
+ if (__LL_ADC_IS_CHANNEL_INTERNAL(pConfig->Channel))
{
tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
/* If the requested internal measurement path has already been enabled, */
/* bypass the configuration processing. */
- if ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) &&
+ if ((pConfig->Channel == ADC_CHANNEL_TEMPSENSOR) &&
((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_TEMPSENSOR) == 0UL))
{
LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance),
@@ -2312,18 +2300,18 @@
/* Note: Variable divided by 2 to compensate partially */
/* CPU processing cycles, scaling in us split to not */
/* exceed 32 bits register capacity and handle low frequency. */
- wait_loop_index = (((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))) + 1UL);
+ wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
while (wait_loop_index != 0UL)
{
wait_loop_index--;
}
}
- else if ((sConfig->Channel == ADC_CHANNEL_VBAT) && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL))
+ else if ((pConfig->Channel == ADC_CHANNEL_VBAT) && ((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VBAT) == 0UL))
{
LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance),
LL_ADC_PATH_INTERNAL_VBAT | tmp_config_internal_channel);
}
- else if ((sConfig->Channel == ADC_CHANNEL_VREFINT) &&
+ else if ((pConfig->Channel == ADC_CHANNEL_VREFINT) &&
((tmp_config_internal_channel & LL_ADC_PATH_INTERNAL_VREFINT) == 0UL))
{
LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance),
@@ -2347,27 +2335,27 @@
{
/* Sequencer set to not fully configurable: */
/* Reset the channel by disabling the corresponding bitfield. */
- LL_ADC_REG_SetSequencerChRem(hadc->Instance, sConfig->Channel);
+ LL_ADC_REG_SetSequencerChRem(hadc->Instance, pConfig->Channel);
}
/* Management of internal measurement channels: Vbat/VrefInt/TempSensor. */
/* If internal channel selected, enable dedicated internal buffers and */
/* paths. */
- if (__LL_ADC_IS_CHANNEL_INTERNAL(sConfig->Channel))
+ if (__LL_ADC_IS_CHANNEL_INTERNAL(pConfig->Channel))
{
tmp_config_internal_channel = LL_ADC_GetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance));
- if (sConfig->Channel == ADC_CHANNEL_TEMPSENSOR)
+ if (pConfig->Channel == ADC_CHANNEL_TEMPSENSOR)
{
LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance),
~LL_ADC_PATH_INTERNAL_TEMPSENSOR & tmp_config_internal_channel);
}
- else if (sConfig->Channel == ADC_CHANNEL_VBAT)
+ else if (pConfig->Channel == ADC_CHANNEL_VBAT)
{
LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance),
~LL_ADC_PATH_INTERNAL_VBAT & tmp_config_internal_channel);
}
- else if (sConfig->Channel == ADC_CHANNEL_VREFINT)
+ else if (pConfig->Channel == ADC_CHANNEL_VREFINT)
{
LL_ADC_SetCommonPathInternalCh(__LL_ADC_COMMON_INSTANCE(hadc->Instance),
~LL_ADC_PATH_INTERNAL_VREFINT & tmp_config_internal_channel);
@@ -2391,10 +2379,8 @@
tmp_hal_status = HAL_ERROR;
}
- /* Process unlocked */
__HAL_UNLOCK(hadc);
- /* Return function status */
return tmp_hal_status;
}
@@ -2417,24 +2403,24 @@
* bus activity, this might cause an uncertainty on the
* effective timing of the new programmed threshold values.
* @param hadc ADC handle
- * @param AnalogWDGConfig Structure of ADC analog watchdog configuration
+ * @param pAnalogWDGConfig Structure of ADC analog watchdog configuration
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *AnalogWDGConfig)
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc, ADC_AnalogWDGConfTypeDef *pAnalogWDGConfig)
{
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
- uint32_t tmpAWDHighThresholdShifted;
- uint32_t tmpAWDLowThresholdShifted;
+ uint32_t tmp_awd_high_threshold_shifted;
+ uint32_t tmp_awd_low_threshold_shifted;
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
- assert_param(IS_ADC_ANALOG_WATCHDOG_NUMBER(AnalogWDGConfig->WatchdogNumber));
- assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(AnalogWDGConfig->WatchdogMode));
- assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode));
+ assert_param(IS_ADC_ANALOG_WATCHDOG_NUMBER(pAnalogWDGConfig->WatchdogNumber));
+ assert_param(IS_ADC_ANALOG_WATCHDOG_MODE(pAnalogWDGConfig->WatchdogMode));
+ assert_param(IS_FUNCTIONAL_STATE(pAnalogWDGConfig->ITMode));
- if (AnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG)
+ if (pAnalogWDGConfig->WatchdogMode == ADC_ANALOGWATCHDOG_SINGLE_REG)
{
- assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel));
+ assert_param(IS_ADC_CHANNEL(pAnalogWDGConfig->Channel));
}
/* Verify thresholds range */
@@ -2443,17 +2429,16 @@
/* Case of oversampling enabled: depending on ratio and shift configuration,
analog watchdog thresholds can be higher than ADC resolution.
Verify if thresholds are within maximum thresholds range. */
- assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->HighThreshold));
- assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, AnalogWDGConfig->LowThreshold));
+ assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, pAnalogWDGConfig->HighThreshold));
+ assert_param(IS_ADC_RANGE(ADC_RESOLUTION_12B, pAnalogWDGConfig->LowThreshold));
}
else
{
/* Verify if thresholds are within the selected ADC resolution */
- assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->HighThreshold));
- assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), AnalogWDGConfig->LowThreshold));
+ assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pAnalogWDGConfig->HighThreshold));
+ assert_param(IS_ADC_RANGE(ADC_GET_RESOLUTION(hadc), pAnalogWDGConfig->LowThreshold));
}
- /* Process locked */
__HAL_LOCK(hadc);
/* Parameters update conditioned to ADC state: */
@@ -2463,16 +2448,16 @@
if (LL_ADC_REG_IsConversionOngoing(hadc->Instance) == 0UL)
{
/* Analog watchdog configuration */
- if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1)
+ if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1)
{
/* Configuration of analog watchdog: */
/* - Set the analog watchdog enable mode: one or overall group of */
/* channels. */
- switch (AnalogWDGConfig->WatchdogMode)
+ switch (pAnalogWDGConfig->WatchdogMode)
{
case ADC_ANALOGWATCHDOG_SINGLE_REG:
LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, LL_ADC_AWD1,
- __LL_ADC_ANALOGWD_CHANNEL_GROUP(AnalogWDGConfig->Channel, LL_ADC_GROUP_REGULAR));
+ __LL_ADC_ANALOGWD_CHANNEL_GROUP(pAnalogWDGConfig->Channel, LL_ADC_GROUP_REGULAR));
break;
case ADC_ANALOGWATCHDOG_ALL_REG:
@@ -2494,7 +2479,7 @@
LL_ADC_ClearFlag_AWD1(hadc->Instance);
/* Configure ADC analog watchdog interrupt */
- if (AnalogWDGConfig->ITMode == ENABLE)
+ if (pAnalogWDGConfig->ITMode == ENABLE)
{
LL_ADC_EnableIT_AWD1(hadc->Instance);
}
@@ -2506,31 +2491,31 @@
/* Case of ADC_ANALOGWATCHDOG_2 or ADC_ANALOGWATCHDOG_3 */
else
{
- switch (AnalogWDGConfig->WatchdogMode)
+ switch (pAnalogWDGConfig->WatchdogMode)
{
case ADC_ANALOGWATCHDOG_SINGLE_REG:
/* Update AWD by bitfield to keep the possibility to monitor */
/* several channels by successive calls of this function. */
- if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2)
+ if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2)
{
- SET_BIT(hadc->Instance->AWD2CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDGConfig->Channel)));
+ SET_BIT(hadc->Instance->AWD2CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(pAnalogWDGConfig->Channel)));
}
else
{
- SET_BIT(hadc->Instance->AWD3CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(AnalogWDGConfig->Channel)));
+ SET_BIT(hadc->Instance->AWD3CR, (1UL << __LL_ADC_CHANNEL_TO_DECIMAL_NB(pAnalogWDGConfig->Channel)));
}
break;
case ADC_ANALOGWATCHDOG_ALL_REG:
- LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_ALL_CHANNELS_REG);
+ LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, pAnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_ALL_CHANNELS_REG);
break;
default: /* ADC_ANALOGWATCHDOG_NONE */
- LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, AnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_DISABLE);
+ LL_ADC_SetAnalogWDMonitChannels(hadc->Instance, pAnalogWDGConfig->WatchdogNumber, LL_ADC_AWD_DISABLE);
break;
}
- if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2)
+ if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_2)
{
/* Update state, clear previous result related to AWD2 */
CLEAR_BIT(hadc->State, HAL_ADC_STATE_AWD2);
@@ -2542,7 +2527,7 @@
LL_ADC_ClearFlag_AWD2(hadc->Instance);
/* Configure ADC analog watchdog interrupt */
- if (AnalogWDGConfig->ITMode == ENABLE)
+ if (pAnalogWDGConfig->ITMode == ENABLE)
{
LL_ADC_EnableIT_AWD2(hadc->Instance);
}
@@ -2551,7 +2536,7 @@
LL_ADC_DisableIT_AWD2(hadc->Instance);
}
}
- /* (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_3) */
+ /* (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_3) */
else
{
/* Update state, clear previous result related to AWD3 */
@@ -2564,7 +2549,7 @@
LL_ADC_ClearFlag_AWD3(hadc->Instance);
/* Configure ADC analog watchdog interrupt */
- if (AnalogWDGConfig->ITMode == ENABLE)
+ if (pAnalogWDGConfig->ITMode == ENABLE)
{
LL_ADC_EnableIT_AWD3(hadc->Instance);
}
@@ -2578,13 +2563,13 @@
}
/* Analog watchdog thresholds configuration */
- if (AnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1)
+ if (pAnalogWDGConfig->WatchdogNumber == ADC_ANALOGWATCHDOG_1)
{
/* Shift the offset with respect to the selected ADC resolution: */
/* Thresholds have to be left-aligned on bit 11, the LSB (right bits) */
/* are set to 0. */
- tmpAWDHighThresholdShifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->HighThreshold);
- tmpAWDLowThresholdShifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, AnalogWDGConfig->LowThreshold);
+ tmp_awd_high_threshold_shifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->HighThreshold);
+ tmp_awd_low_threshold_shifted = ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(hadc, pAnalogWDGConfig->LowThreshold);
}
/* Case of ADC_ANALOGWATCHDOG_2 and ADC_ANALOGWATCHDOG_3 */
else
@@ -2592,18 +2577,16 @@
/* No need to shift the offset with respect to the selected ADC resolution: */
/* Thresholds have to be left-aligned on bit 11, the LSB (right bits) */
/* are set to 0. */
- tmpAWDHighThresholdShifted = AnalogWDGConfig->HighThreshold;
- tmpAWDLowThresholdShifted = AnalogWDGConfig->LowThreshold;
+ tmp_awd_high_threshold_shifted = pAnalogWDGConfig->HighThreshold;
+ tmp_awd_low_threshold_shifted = pAnalogWDGConfig->LowThreshold;
}
/* Set ADC analog watchdog thresholds value of both thresholds high and low */
- LL_ADC_ConfigAnalogWDThresholds(hadc->Instance, AnalogWDGConfig->WatchdogNumber, tmpAWDHighThresholdShifted,
- tmpAWDLowThresholdShifted);
+ LL_ADC_ConfigAnalogWDThresholds(hadc->Instance, pAnalogWDGConfig->WatchdogNumber, tmp_awd_high_threshold_shifted,
+ tmp_awd_low_threshold_shifted);
- /* Process unlocked */
__HAL_UNLOCK(hadc);
- /* Return function status */
return tmp_hal_status;
}
@@ -2707,13 +2690,17 @@
{
if ((HAL_GetTick() - tickstart) > ADC_STOP_CONVERSION_TIMEOUT)
{
- /* Update ADC state machine to error */
- SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+ /* New check to avoid false timeout detection in case of preemption */
+ if ((hadc->Instance->CR & ADC_CR_ADSTART) != 0UL)
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
- /* Set ADC error code to ADC peripheral internal error */
- SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+ /* Set ADC error code to ADC peripheral internal error */
+ SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
- return HAL_ERROR;
+ return HAL_ERROR;
+ }
}
}
@@ -2763,7 +2750,7 @@
/* Note: Variable divided by 2 to compensate partially */
/* CPU processing cycles, scaling in us split to not */
/* exceed 32 bits register capacity and handle low frequency. */
- wait_loop_index = (((LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL))) + 1UL);
+ wait_loop_index = ((LL_ADC_DELAY_TEMPSENSOR_BUFFER_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
while (wait_loop_index != 0UL)
{
wait_loop_index--;
@@ -2794,13 +2781,17 @@
if ((HAL_GetTick() - tickstart) > ADC_ENABLE_TIMEOUT)
{
- /* Update ADC state machine to error */
- SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+ /* New check to avoid false timeout detection in case of preemption */
+ if (__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_RDY) == 0UL)
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
- /* Set ADC error code to ADC peripheral internal error */
- SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+ /* Set ADC error code to ADC peripheral internal error */
+ SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
- return HAL_ERROR;
+ return HAL_ERROR;
+ }
}
}
}
@@ -2855,13 +2846,17 @@
{
if ((HAL_GetTick() - tickstart) > ADC_DISABLE_TIMEOUT)
{
- /* Update ADC state machine to error */
- SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
+ /* New check to avoid false timeout detection in case of preemption */
+ if ((hadc->Instance->CR & ADC_CR_ADEN) != 0UL)
+ {
+ /* Update ADC state machine to error */
+ SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL);
- /* Set ADC error code to ADC peripheral internal error */
- SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
+ /* Set ADC error code to ADC peripheral internal error */
+ SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_INTERNAL);
- return HAL_ERROR;
+ return HAL_ERROR;
+ }
}
}
}
diff --git a/Src/stm32g0xx_hal_adc_ex.c b/Src/stm32g0xx_hal_adc_ex.c
index d39e593..b26cfd6 100644
--- a/Src/stm32g0xx_hal_adc_ex.c
+++ b/Src/stm32g0xx_hal_adc_ex.c
@@ -12,12 +12,6 @@
* Other functions (generic functions) are available in file
* "stm32g0xx_hal_adc.c".
*
- @verbatim
- [..]
- (@) Sections "ADC peripheral features" and "How to use this driver" are
- available in file of generic functions "stm32g0xx_hal_adc.c".
- [..]
- @endverbatim
******************************************************************************
* @attention
*
@@ -30,6 +24,12 @@
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
+ @verbatim
+ [..]
+ (@) Sections "ADC peripheral features" and "How to use this driver" are
+ available in file of generic functions "stm32g0xx_hal_adc.c".
+ [..]
+ @endverbatim
*/
/* Includes ------------------------------------------------------------------*/
@@ -110,7 +110,6 @@
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
- /* Process locked */
__HAL_LOCK(hadc);
/* Calibration prerequisite: ADC must be disabled. */
@@ -149,7 +148,6 @@
HAL_ADC_STATE_BUSY_INTERNAL,
HAL_ADC_STATE_ERROR_INTERNAL);
- /* Process unlocked */
__HAL_UNLOCK(hadc);
return HAL_ERROR;
@@ -172,10 +170,8 @@
/* to state "HAL_ERROR" by function disabling the ADC. */
}
- /* Process unlocked */
__HAL_UNLOCK(hadc);
- /* Return function status */
return tmp_hal_status;
}
@@ -209,7 +205,6 @@
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
assert_param(IS_ADC_CALFACT(CalibrationFactor));
- /* Process locked */
__HAL_LOCK(hadc);
/* Verification of hardware constraints before modifying the calibration */
@@ -234,10 +229,8 @@
tmp_hal_status = HAL_ERROR;
}
- /* Process unlocked */
__HAL_UNLOCK(hadc);
- /* Return function status */
return tmp_hal_status;
}
diff --git a/Src/stm32g0xx_hal_cec.c b/Src/stm32g0xx_hal_cec.c
index bdb35b6..74e6728 100644
--- a/Src/stm32g0xx_hal_cec.c
+++ b/Src/stm32g0xx_hal_cec.c
@@ -822,19 +822,15 @@
/* CEC TX byte request interrupt ------------------------------------------------*/
if ((reg & CEC_FLAG_TXBR) != 0U)
{
+ --hcec->TxXferCount;
if (hcec->TxXferCount == 0U)
{
/* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
__HAL_CEC_LAST_BYTE_TX_SET(hcec);
- hcec->Instance->TXDR = *hcec->pTxBuffPtr;
- hcec->pTxBuffPtr++;
}
- else
- {
- hcec->Instance->TXDR = *hcec->pTxBuffPtr;
- hcec->pTxBuffPtr++;
- hcec->TxXferCount--;
- }
+ /* In all cases transmit the byte */
+ hcec->Instance->TXDR = *hcec->pTxBuffPtr;
+ hcec->pTxBuffPtr++;
/* clear Tx-Byte request flag */
__HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR);
}
diff --git a/Src/stm32g0xx_hal_comp.c b/Src/stm32g0xx_hal_comp.c
index 63f1419..84b73f5 100644
--- a/Src/stm32g0xx_hal_comp.c
+++ b/Src/stm32g0xx_hal_comp.c
@@ -240,7 +240,7 @@
#if defined(COMP3)
__IO uint32_t * comp_common_odd;
__IO uint32_t * comp_common_even;
-#endif
+#endif /* COMP3 */
/* Check the COMP handle allocation and lock status */
if(hcomp == NULL)
@@ -425,7 +425,7 @@
CLEAR_BIT(COMP12_COMMON->CSR_EVEN, COMP_CSR_WINOUT);
break;
}
-#endif
+#endif /* COMP3 */
/* Delay for COMP scaler bridge voltage stabilization */
/* Apply the delay if voltage scaler bridge is required and not already enabled */
@@ -436,7 +436,7 @@
/* Note: Variable divided by 2 to compensate partially */
/* CPU processing cycles, scaling in us split to not */
/* exceed 32 bits register capacity and handle low frequency. */
- wait_loop_index = ((COMP_DELAY_VOLTAGE_SCALER_STAB_US / 10UL) * (SystemCoreClock / (100000UL * 2UL)));
+ wait_loop_index = ((COMP_DELAY_VOLTAGE_SCALER_STAB_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
while(wait_loop_index != 0UL)
{
wait_loop_index--;
@@ -811,7 +811,7 @@
/* Note: Variable divided by 2 to compensate partially */
/* CPU processing cycles, scaling in us split to not */
/* exceed 32 bits register capacity and handle low frequency. */
- wait_loop_index = ((COMP_DELAY_STARTUP_US / 10UL) * (SystemCoreClock / (100000UL * 2UL)));
+ wait_loop_index = ((COMP_DELAY_STARTUP_US / 10UL) * ((SystemCoreClock / (100000UL * 2UL)) + 1UL));
while(wait_loop_index != 0UL)
{
wait_loop_index--;
@@ -907,7 +907,7 @@
comparator_window_mode = READ_BIT(COMP12_COMMON->CSR_ODD, COMP_CSR_WINMODE);
comparator_window_mode |= READ_BIT(COMP12_COMMON->CSR_EVEN, COMP_CSR_WINMODE);
comparator_window_exti_lines = (COMP_EXTI_LINE_COMP1 | COMP_EXTI_LINE_COMP2);
-#endif
+#endif /* COMP3 */
/* Check COMP EXTI flag */
if(LL_EXTI_IsActiveRisingFlag_0_31(exti_line) != 0UL)
diff --git a/Src/stm32g0xx_hal_crc.c b/Src/stm32g0xx_hal_crc.c
index b8f8094..6d18f20 100644
--- a/Src/stm32g0xx_hal_crc.c
+++ b/Src/stm32g0xx_hal_crc.c
@@ -62,8 +62,8 @@
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup CRC_Private_Functions CRC Private Functions
- * @{
- */
+ * @{
+ */
static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength);
static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength);
/**
@@ -77,8 +77,8 @@
*/
/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions.
- *
+ * @brief Initialization and Configuration functions.
+ *
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
@@ -250,8 +250,8 @@
*/
/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
- * @brief management functions.
- *
+ * @brief management functions.
+ *
@verbatim
===============================================================================
##### Peripheral Control functions #####
@@ -385,8 +385,8 @@
*/
/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
- * @brief Peripheral State functions.
- *
+ * @brief Peripheral State functions.
+ *
@verbatim
===============================================================================
##### Peripheral State functions #####
@@ -418,8 +418,8 @@
*/
/** @addtogroup CRC_Private_Functions
- * @{
- */
+ * @{
+ */
/**
* @brief Enter 8-bit input data to the CRC calculator.
diff --git a/Src/stm32g0xx_hal_cryp.c b/Src/stm32g0xx_hal_cryp.c
index 0d9f954..0a12d93 100644
--- a/Src/stm32g0xx_hal_cryp.c
+++ b/Src/stm32g0xx_hal_cryp.c
@@ -587,15 +587,17 @@
__HAL_LOCK(hcryp);
/* Set CRYP parameters */
- hcryp->Init.DataType = pConf->DataType;
- hcryp->Init.pKey = pConf->pKey;
- hcryp->Init.Algorithm = pConf->Algorithm;
- hcryp->Init.KeySize = pConf->KeySize;
- hcryp->Init.pInitVect = pConf->pInitVect;
- hcryp->Init.Header = pConf->Header;
- hcryp->Init.HeaderSize = pConf->HeaderSize;
- hcryp->Init.B0 = pConf->B0;
- hcryp->Init.DataWidthUnit = pConf->DataWidthUnit;
+ hcryp->Init.DataType = pConf->DataType;
+ hcryp->Init.pKey = pConf->pKey;
+ hcryp->Init.Algorithm = pConf->Algorithm;
+ hcryp->Init.KeySize = pConf->KeySize;
+ hcryp->Init.pInitVect = pConf->pInitVect;
+ hcryp->Init.Header = pConf->Header;
+ hcryp->Init.HeaderSize = pConf->HeaderSize;
+ hcryp->Init.B0 = pConf->B0;
+ hcryp->Init.DataWidthUnit = pConf->DataWidthUnit;
+ hcryp->Init.HeaderWidthUnit = pConf->HeaderWidthUnit;
+ hcryp->Init.KeyIVConfigSkip = pConf->KeyIVConfigSkip;
/* Set the key size (This bit field is do not care in the DES or TDES modes), data type and operating mode*/
MODIFY_REG(hcryp->Instance->CR, AES_CR_DATATYPE | AES_CR_KEYSIZE | AES_CR_CHMOD, hcryp->Init.DataType | hcryp->Init.KeySize | hcryp->Init.Algorithm);
@@ -661,7 +663,9 @@
pConf->Header = hcryp->Init.Header ;
pConf->HeaderSize = hcryp->Init.HeaderSize;
pConf->B0 = hcryp->Init.B0;
- pConf->DataWidthUnit = hcryp->Init.DataWidthUnit;
+ pConf->DataWidthUnit = hcryp->Init.DataWidthUnit;
+ pConf->HeaderWidthUnit = hcryp->Init.HeaderWidthUnit;
+ pConf->KeyIVConfigSkip = hcryp->Init.KeyIVConfigSkip;
/* Process Unlocked */
__HAL_UNLOCK(hcryp);
@@ -693,8 +697,8 @@
/* Prevent unused argument(s) compilation warning */
UNUSED(hcryp);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRYP_MspInit could be implemented in the user file
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_CRYP_MspInit can be implemented in the user file
*/
}
@@ -709,8 +713,8 @@
/* Prevent unused argument(s) compilation warning */
UNUSED(hcryp);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRYP_MspDeInit could be implemented in the user file
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_CRYP_MspDeInit can be implemented in the user file
*/
}
@@ -1205,7 +1209,7 @@
/* Check input buffer size */
assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size));
-#endif
+#endif /* USE_FULL_ASSERT */
if (hcryp->State == HAL_CRYP_STATE_READY)
{
@@ -1305,7 +1309,7 @@
/* Check input buffer size */
assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size));
-#endif
+#endif /* USE_FULL_ASSERT */
if (hcryp->State == HAL_CRYP_STATE_READY)
{
@@ -1404,7 +1408,7 @@
/* Check input buffer size */
assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size));
-#endif
+#endif /* USE_FULL_ASSERT */
if (hcryp->State == HAL_CRYP_STATE_READY)
{
@@ -1514,7 +1518,7 @@
/* Check input buffer size */
assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size));
-#endif
+#endif /* USE_FULL_ASSERT */
if (hcryp->State == HAL_CRYP_STATE_READY)
{
@@ -1624,7 +1628,7 @@
/* Check input buffer size */
assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size));
-#endif
+#endif /* USE_FULL_ASSERT */
if (hcryp->State == HAL_CRYP_STATE_READY)
{
@@ -1750,7 +1754,7 @@
/* Check input buffer size */
assert_param(IS_CRYP_BUFFERSIZE(algo_assert, hcryp->Init.DataWidthUnit, Size));
-#endif
+#endif /* USE_FULL_ASSERT */
if (hcryp->State == HAL_CRYP_STATE_READY)
{
@@ -1929,8 +1933,8 @@
/* Prevent unused argument(s) compilation warning */
UNUSED(hcryp);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRYP_InCpltCallback could be implemented in the user file
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_CRYP_InCpltCallback can be implemented in the user file
*/
}
@@ -1945,8 +1949,8 @@
/* Prevent unused argument(s) compilation warning */
UNUSED(hcryp);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRYP_OutCpltCallback could be implemented in the user file
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_CRYP_OutCpltCallback can be implemented in the user file
*/
}
@@ -1961,8 +1965,8 @@
/* Prevent unused argument(s) compilation warning */
UNUSED(hcryp);
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRYP_ErrorCallback could be implemented in the user file
+ /* NOTE : This function should not be modified; when the callback is needed,
+ the HAL_CRYP_ErrorCallback can be implemented in the user file
*/
}
/**
@@ -2570,15 +2574,31 @@
/* Initiate payload DMA IN and processed data DMA OUT transfers */
(void)CRYP_GCMCCM_SetPayloadPhase_DMA(hcryp);
}
+ else
+ {
+ uint32_t algo;
+ /* ECB, CBC or CTR end of input data feeding
+ or
+ end of GCM/CCM payload data feeding through DMA */
+ algo = hcryp->Instance->CR & AES_CR_CHMOD;
- /* Call input data transfer complete callback */
+ /* Don't call input data transfer complete callback only if
+ it remains some input data to write to the peripheral.
+ This case can only occur for GCM and CCM with a payload length
+ not a multiple of 16 bytes */
+ if (!(((algo == CRYP_AES_GCM_GMAC) || (algo == CRYP_AES_CCM)) && \
+ (((hcryp->Size) % 16U) != 0U)))
+ {
+ /* Call input data transfer complete callback */
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
- /*Call registered Input complete callback*/
- hcryp->InCpltCallback(hcryp);
+ /*Call registered Input complete callback*/
+ hcryp->InCpltCallback(hcryp);
#else
- /*Call legacy weak Input complete callback*/
- HAL_CRYP_InCpltCallback(hcryp);
+ /*Call legacy weak Input complete callback*/
+ HAL_CRYP_InCpltCallback(hcryp);
#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
+ }
+ } /* if (hcryp->Phase == CRYP_PHASE_HEADER_DMA_FEED) */
}
/**
@@ -2642,6 +2662,14 @@
hcryp->Instance->DINR = 0x0U;
count++;
}
+ /* Call input data transfer complete callback */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
+ /*Call registered Input complete callback*/
+ hcryp->InCpltCallback(hcryp);
+#else
+ /*Call legacy weak Input complete callback*/
+ HAL_CRYP_InCpltCallback(hcryp);
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
/*Wait on CCF flag*/
CRYP_ClearCCFlagWhenHigh(hcryp, CRYP_TIMEOUT_GCMCCMHEADERPHASE);
@@ -3380,7 +3408,7 @@
hcryp->CrypInCount++;
hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount);
hcryp->CrypInCount++;
- if (hcryp->CrypInCount == (hcryp->Size / 4U))
+ if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U))
{
/* Call Input transfer complete callback */
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
@@ -3431,6 +3459,14 @@
hcryp->Instance->DINR = 0x0U;
loopcounter++;
}
+ /* Call Input transfer complete callback */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
+ /*Call registered Input complete callback*/
+ hcryp->InCpltCallback(hcryp);
+#else
+ /*Call legacy weak Input complete callback*/
+ HAL_CRYP_InCpltCallback(hcryp);
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
}
}
/* Enter header data */
@@ -3470,15 +3506,6 @@
hcryp->CrypHeaderCount++;
}
}
-
- /* Call Input transfer complete callback */
-#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
- /*Call registered Input complete callback*/
- hcryp->InCpltCallback(hcryp);
-#else
- /*Call legacy weak Input complete callback*/
- HAL_CRYP_InCpltCallback(hcryp);
-#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
}
else
{
@@ -3528,7 +3555,7 @@
hcryp->CrypInCount++;
hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount);
hcryp->CrypInCount++;
- if (hcryp->CrypInCount == (hcryp->Size / 4U))
+ if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U))
{
/* Call Input transfer complete callback */
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
@@ -3579,6 +3606,14 @@
hcryp->Instance->DINR = 0x0U;
loopcounter++;
}
+ /* Call Input transfer complete callback */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
+ /*Call registered Input complete callback*/
+ hcryp->InCpltCallback(hcryp);
+#else
+ /*Call legacy weak Input complete callback*/
+ HAL_CRYP_InCpltCallback(hcryp);
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
}
}
@@ -3904,6 +3939,11 @@
uint32_t npblb;
uint32_t mode;
uint32_t DoKeyIVConfig = 1U; /* By default, carry out peripheral Key and IV configuration */
+ uint32_t headersize_in_bytes;
+ uint32_t tmp;
+ uint32_t mask[12] = {0x0U, 0xFF000000U, 0xFFFF0000U, 0xFFFFFF00U, /* 32-bit data type */
+ 0x0U, 0x0000FF00U, 0x0000FFFFU, 0xFF00FFFFU, /* 16-bit data type */
+ 0x0U, 0x000000FFU, 0x0000FFFFU, 0x00FFFFFFU}; /* 8-bit data type */
#if (USE_HAL_CRYP_SUSPEND_RESUME == 1U)
if ((hcryp->Phase == CRYP_PHASE_HEADER_SUSPENDED) || (hcryp->Phase == CRYP_PHASE_PAYLOAD_SUSPENDED))
@@ -3993,7 +4033,16 @@
/* Enable the CRYP peripheral */
__HAL_CRYP_ENABLE(hcryp);
- if (hcryp->Init.HeaderSize == 0U) /*header phase is skipped*/
+ if (hcryp->Init.HeaderWidthUnit == CRYP_HEADERWIDTHUNIT_WORD)
+ {
+ headersize_in_bytes = hcryp->Init.HeaderSize * 4U;
+ }
+ else
+ {
+ headersize_in_bytes = hcryp->Init.HeaderSize;
+ }
+
+ if (headersize_in_bytes == 0U) /* Header phase is skipped */
{
/* Set the phase */
hcryp->Phase = CRYP_PHASE_PROCESS;
@@ -4077,26 +4126,63 @@
hcryp->Instance->DINR = 0x0U;
loopcounter++;
}
+ /* Call Input transfer complete callback */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
+ /*Call registered Input complete callback*/
+ hcryp->InCpltCallback(hcryp);
+#else
+ /*Call legacy weak Input complete callback*/
+ HAL_CRYP_InCpltCallback(hcryp);
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
}
}
- else if ((hcryp->Init.HeaderSize) < 4U) /*HeaderSize < 4 */
+ /* Enter header data */
+ /* Check first whether header length is small enough to enter the full header in one shot */
+ else if (headersize_in_bytes <= 16U)
{
- /* Last block optionally pad the data with zeros*/
- for (loopcounter = 0U; loopcounter < (hcryp->Init.HeaderSize % 4U); loopcounter++)
+ for (loopcounter = 0U; (loopcounter < (headersize_in_bytes / 4U)); loopcounter++)
{
hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount);
hcryp->CrypHeaderCount++ ;
}
+ /* If the header size is a multiple of words */
+ if ((headersize_in_bytes % 4U) == 0U)
+ {
+ /* Pad the data with zeros to have a complete block */
+ while (loopcounter < 4U)
+ {
+ hcryp->Instance->DINR = 0x0U;
+ loopcounter++;
+ }
+ }
+ else
+ {
+ /* Enter last bytes, padded with zeros */
+ tmp = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount);
+ tmp &= mask[(hcryp->Init.DataType * 2U) + (headersize_in_bytes % 4U)];
+ hcryp->Instance->DINR = tmp;
+ hcryp->CrypHeaderCount++;
+ loopcounter++;
+ /* Pad the data with zeros to have a complete block */
while (loopcounter < 4U)
{
- /* pad the data with zeros to have a complete block */
hcryp->Instance->DINR = 0x0U;
loopcounter++;
}
}
+ /* Call Input transfer complete callback */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
+ /*Call registered Input complete callback*/
+ hcryp->InCpltCallback(hcryp);
+#else
+ /*Call legacy weak Input complete callback*/
+ HAL_CRYP_InCpltCallback(hcryp);
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
+ }
else
{
- /* Write the input block in the IN FIFO */
+ /* Write the first input header block in the Input FIFO,
+ the following header data will be fed after interrupt occurrence */
hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount);
hcryp->CrypHeaderCount++;
hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount);
@@ -4105,9 +4191,8 @@
hcryp->CrypHeaderCount++;
hcryp->Instance->DINR = *(uint32_t *)(hcryp->Init.Header + hcryp->CrypHeaderCount);
hcryp->CrypHeaderCount++;
- }
-
- } /* end of if (DoKeyIVConfig == 1U) */
+ }/* if (hcryp->Init.HeaderSize == 0U) */ /* Header phase is skipped*/
+ } /* end of if (dokeyivconfig == 1U) */
else /* Key and IV have already been configured,
header has already been processed;
only process here message payload */
@@ -4182,6 +4267,14 @@
hcryp->Instance->DINR = 0x0U;
loopcounter++;
}
+ /* Call Input transfer complete callback */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
+ /*Call registered Input complete callback*/
+ hcryp->InCpltCallback(hcryp);
+#else
+ /*Call legacy weak Input complete callback*/
+ HAL_CRYP_InCpltCallback(hcryp);
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
}
}
@@ -4387,9 +4480,9 @@
hcryp->CrypInCount++;
hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount);
hcryp->CrypInCount++;
- if ((hcryp->CrypInCount == hcryp->Size) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC))
+ if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U))
{
- /* Call output transfer complete callback */
+ /* Call input transfer complete callback */
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
/*Call registered Input complete callback*/
hcryp->InCpltCallback(hcryp);
@@ -4435,6 +4528,14 @@
hcryp->Instance->DINR = 0x0U;
loopcounter++;
}
+ /* Call input transfer complete callback */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
+ /*Call registered Input complete callback*/
+ hcryp->InCpltCallback(hcryp);
+#else
+ /*Call legacy weak Input complete callback*/
+ HAL_CRYP_InCpltCallback(hcryp);
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
}
}
@@ -4509,6 +4610,14 @@
hcryp->Instance->DINR = 0U;
index++;
}
+ /* Call the input data transfer complete callback */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
+ /*Call registered Input complete callback*/
+ hcryp->InCpltCallback(hcryp);
+#else
+ /*Call legacy weak Input complete callback*/
+ HAL_CRYP_InCpltCallback(hcryp);
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
/* Wait for CCF flag to be raised */
count = CRYP_TIMEOUT_GCMCCMHEADERPHASE;
do
@@ -4550,6 +4659,15 @@
/* Process unlocked */
__HAL_UNLOCK(hcryp);
+
+ /* Call Output transfer complete callback */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
+ /*Call registered Output complete callback*/
+ hcryp->OutCpltCallback(hcryp);
+#else
+ /*Call legacy weak Output complete callback*/
+ HAL_CRYP_OutCpltCallback(hcryp);
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
}
return HAL_OK;
@@ -4947,6 +5065,14 @@
hcryp->Instance->DINR = 0x0U;
loopcounter++;
}
+ /* Call the input data transfer complete callback */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1U)
+ /*Call registered Input complete callback*/
+ hcryp->InCpltCallback(hcryp);
+#else
+ /*Call legacy weak Input complete callback*/
+ HAL_CRYP_InCpltCallback(hcryp);
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
}
}
else if ((((headersize_in_bytes / 4U) - (hcryp->CrypHeaderCount)) >= 4U))
@@ -5398,9 +5524,9 @@
hcryp->CrypInCount++;
hcryp->Instance->DINR = *(uint32_t *)(hcryp->pCrypInBuffPtr + hcryp->CrypInCount );
hcryp->CrypInCount++;
- if((hcryp->CrypInCount == hcryp->Size) && (hcryp->Init.Algorithm == CRYP_AES_GCM_GMAC))
+ if ((hcryp->CrypInCount == (hcryp->Size / 4U)) && ((hcryp->Size % 16U) == 0U))
{
- /* Call output transfer complete callback */
+ /* Call input transfer complete callback */
#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
/*Call registered Input complete callback*/
hcryp->InCpltCallback(hcryp);
diff --git a/Src/stm32g0xx_hal_dma.c b/Src/stm32g0xx_hal_dma.c
index 0c39128..230decf 100644
--- a/Src/stm32g0xx_hal_dma.c
+++ b/Src/stm32g0xx_hal_dma.c
@@ -26,7 +26,6 @@
Prior to HAL_DMA_Init the peripheral clock shall be enabled for both DMA & DMAMUX
thanks to:
(##) DMA1 or DMA2: __HAL_RCC_DMA1_CLK_ENABLE() or __HAL_RCC_DMA2_CLK_ENABLE();
- (##) DMAMUX1: __HAL_RCC_DMAMUX1_CLK_ENABLE();
(#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
detection.
@@ -185,7 +184,7 @@
}
#else
hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U;
-#endif
+#endif /* DMA2 */
/* Change DMA peripheral state */
hdma->State = HAL_DMA_STATE_BUSY;
@@ -286,7 +285,7 @@
}
#else
hdma->ChannelIndex = (((uint32_t)hdma->Instance - (uint32_t)DMA1_Channel1) / ((uint32_t)DMA1_Channel2 - (uint32_t)DMA1_Channel1)) << 2U;
-#endif
+#endif /* DMA2 */
/* Reset DMA Channel control register */
hdma->Instance->CCR = 0U;
@@ -296,7 +295,7 @@
hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU));
#else
__HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU)));
-#endif
+#endif /* DMA2 */
/* Initialize parameters for DMAMUX channel :
DMAmuxChannel, DMAmuxChannelStatus and DMAmuxChannelStatusMask */
@@ -537,7 +536,7 @@
hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU));
#else
__HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1CU)));
-#endif
+#endif /* DMA2 */
/* Clear the DMAMUX synchro overrun flag */
hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
@@ -595,7 +594,7 @@
hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU));
#else
__HAL_DMA_CLEAR_FLAG(hdma, ((DMA_FLAG_GI1) << (hdma->ChannelIndex & 0x1CU)));
-#endif
+#endif /* DMA2 */
/* Clear the DMAMUX synchro overrun flag */
hdma->DMAmuxChannelStatus->CFR = hdma->DMAmuxChannelStatusMask;
@@ -710,7 +709,7 @@
return HAL_ERROR;
}
-#endif
+#endif /* DMA2 */
/* Check for the Timeout */
if (Timeout != HAL_MAX_DELAY)
{
@@ -764,7 +763,7 @@
hdma->DmaBaseAddress->IFCR = (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU));
#else
__HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_TC1 << (hdma->ChannelIndex & 0x1CU)));
-#endif
+#endif /* DMA2 */
/* Process unlocked */
__HAL_UNLOCK(hdma);
@@ -780,7 +779,7 @@
hdma->DmaBaseAddress->IFCR = (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU));
#else
__HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU)));
-#endif
+#endif /* DMA2 */
}
return HAL_OK;
@@ -798,7 +797,7 @@
uint32_t flag_it = hdma->DmaBaseAddress->ISR;
#else
uint32_t flag_it = DMA1->ISR;
-#endif
+#endif /* DMA2 */
uint32_t source_it = hdma->Instance->CCR;
/* Half Transfer Complete Interrupt management ******************************/
@@ -815,7 +814,7 @@
hdma->DmaBaseAddress->IFCR = DMA_ISR_HTIF1 << (hdma->ChannelIndex & 0x1CU);
#else
__HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_HT1 << (hdma->ChannelIndex & 0x1CU)));
-#endif
+#endif /* DMA2 */
/* DMA peripheral state is not updated in Half Transfer */
/* but in Transfer Complete case */
@@ -864,7 +863,7 @@
hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU));
#else
__HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU)));
-#endif
+#endif /* DMA2 */
/* Update error code */
hdma->ErrorCode = HAL_DMA_ERROR_TE;
@@ -1082,7 +1081,7 @@
hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << (hdma->ChannelIndex & 0x1CU));
#else
__HAL_DMA_CLEAR_FLAG(hdma, (DMA_FLAG_GI1 << (hdma->ChannelIndex & 0x1CU)));
-#endif
+#endif /* DMA2 */
/* Configure DMA Channel data length */
hdma->Instance->CNDTR = DataLength;
@@ -1143,7 +1142,7 @@
/* Prepare channel_number used for DMAmuxChannelStatusMask computation */
channel_number = (((uint32_t)hdma->Instance & 0xFFU) - 8U) / 20U;
-#endif
+#endif /* DMA2 */
/* Initialize the field DMAmuxChannelStatus to DMAMUX1_ChannelStatus base */
hdma->DMAmuxChannelStatus = DMAMUX1_ChannelStatus;
diff --git a/Src/stm32g0xx_hal_exti.c b/Src/stm32g0xx_hal_exti.c
index 02371b7..76986d2 100644
--- a/Src/stm32g0xx_hal_exti.c
+++ b/Src/stm32g0xx_hal_exti.c
@@ -312,6 +312,10 @@
pExtiConfig->Mode |= EXTI_MODE_EVENT;
}
+ /* Get default Trigger and GPIOSel configuration */
+ pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
+ pExtiConfig->GPIOSel = 0x00u;
+
/* 2] Get trigger for configurable lines : rising */
if ((pExtiConfig->Line & EXTI_CONFIG) != 0x00u)
{
@@ -323,10 +327,6 @@
{
pExtiConfig->Trigger = EXTI_TRIGGER_RISING;
}
- else
- {
- pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
- }
/* Get falling configuration */
regaddr = (&EXTI->FTSR1 + (EXTI_CONFIG_OFFSET * offset));
@@ -346,15 +346,6 @@
regval = EXTI->EXTICR[linepos >> 2u];
pExtiConfig->GPIOSel = ((regval << (EXTI_EXTICR1_EXTI1_Pos * (3uL - (linepos & 0x03u)))) >> 24);
}
- else
- {
- pExtiConfig->GPIOSel = 0x00u;
- }
- }
- else
- {
- pExtiConfig->Trigger = EXTI_TRIGGER_NONE;
- pExtiConfig->GPIOSel = 0x00u;
}
return HAL_OK;
diff --git a/Src/stm32g0xx_hal_flash.c b/Src/stm32g0xx_hal_flash.c
index 177de10..5426e39 100644
--- a/Src/stm32g0xx_hal_flash.c
+++ b/Src/stm32g0xx_hal_flash.c
@@ -103,8 +103,8 @@
/* Private macros ------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup FLASH_Private_Variables FLASH Private Variables
- * @{
- */
+ * @{
+ */
/**
* @brief Variable used for Program/Erase sectors under interruption
*/
@@ -122,8 +122,8 @@
/* Private function prototypes -----------------------------------------------*/
/** @defgroup FLASH_Private_Functions FLASH Private Functions
- * @{
- */
+ * @{
+ */
static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
static void FLASH_Program_Fast(uint32_t Address, uint32_t DataAddress);
/**
@@ -136,8 +136,8 @@
*/
/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
- * @brief Programming operation functions
- *
+ * @brief Programming operation functions
+ *
@verbatim
===============================================================================
##### Programming operation functions #####
@@ -157,7 +157,9 @@
* @param Address Specifies the address to be programmed.
* @param Data Specifies the data to be programmed
* This parameter is the data for the double word program and the address where
- * are stored the data for the row fast program.
+ * are stored the data for the row fast program depending on the TypeProgram:
+ * TypeProgram = FLASH_TYPEPROGRAM_DOUBLEWORD (64-bit)
+ * TypeProgram = FLASH_TYPEPROGRAM_FAST (32-bit).
*
* @retval HAL_StatusTypeDef HAL Status
*/
@@ -217,7 +219,9 @@
* @param Address Specifies the address to be programmed.
* @param Data Specifies the data to be programmed
* This parameter is the data for the double word program and the address where
- * are stored the data for the row fast program.
+ * are stored the data for the row fast program depending on the TypeProgram:
+ * TypeProgram = FLASH_TYPEPROGRAM_DOUBLEWORD (64-bit)
+ * TypeProgram = FLASH_TYPEPROGRAM_FAST (32-bit).
*
* @retval HAL Status
*/
@@ -410,8 +414,8 @@
*/
/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
- * @brief Management functions
- *
+ * @brief Management functions
+ *
@verbatim
===============================================================================
##### Peripheral Control functions #####
@@ -531,8 +535,8 @@
*/
/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions
- * @brief Peripheral Errors functions
- *
+ * @brief Peripheral Errors functions
+ *
@verbatim
===============================================================================
##### Peripheral Errors functions #####
@@ -598,7 +602,7 @@
error = (FLASH_SR_BSY1 | FLASH_SR_BSY2);
#else
error = FLASH_SR_BSY1;
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
while ((FLASH->SR & error) != 0x00U)
{
@@ -694,7 +698,7 @@
while ((FLASH->SR & (FLASH_SR_BSY1 | FLASH_SR_BSY2)) != 0x00U)
#else
while ((FLASH->SR & FLASH_SR_BSY1) != 0x00U)
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
{
}
diff --git a/Src/stm32g0xx_hal_flash_ex.c b/Src/stm32g0xx_hal_flash_ex.c
index e7c31dc..637fe06 100644
--- a/Src/stm32g0xx_hal_flash_ex.c
+++ b/Src/stm32g0xx_hal_flash_ex.c
@@ -89,8 +89,8 @@
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions
- * @{
- */
+ * @{
+ */
static void FLASH_MassErase(uint32_t Banks);
void FLASH_FlushCaches(void);
static void FLASH_OB_WRPConfig(uint32_t WRPArea, uint32_t WRPStartOffset, uint32_t WRDPEndOffset);
@@ -99,17 +99,19 @@
static uint32_t FLASH_OB_GetRDP(void);
static uint32_t FLASH_OB_GetUser(void);
#if defined(FLASH_PCROP_SUPPORT)
-static void FLASH_OB_PCROP1AConfig(uint32_t PCROPConfig, uint32_t PCROP1AStartAddr, uint32_t PCROP1AEndAddr);
+static void FLASH_OB_PCROP1AConfig(uint32_t PCROPConfig, uint32_t PCROP1AStartAddr,
+ uint32_t PCROP1AEndAddr);
static void FLASH_OB_PCROP1BConfig(uint32_t PCROP1BStartAddr, uint32_t PCROP1BEndAddr);
-static void FLASH_OB_GetPCROP1A(uint32_t *PCROPConfig, uint32_t *PCROP1AStartAddr, uint32_t *PCROP1AEndAddr);
+static void FLASH_OB_GetPCROP1A(uint32_t *PCROPConfig, uint32_t *PCROP1AStartAddr,
+ uint32_t *PCROP1AEndAddr);
static void FLASH_OB_GetPCROP1B(uint32_t *PCROP1BStartAddr, uint32_t *PCROP1BEndAddr);
#if defined(FLASH_DBANK_SUPPORT)
static void FLASH_OB_PCROP2AConfig(uint32_t PCROP2AStartAddr, uint32_t PCROP2AEndAddr);
static void FLASH_OB_PCROP2BConfig(uint32_t PCROP2BStartAddr, uint32_t PCROP2BEndAddr);
static void FLASH_OB_GetPCROP2A(uint32_t *PCROP2AStartAddr, uint32_t *PCROP2AEndAddr);
static void FLASH_OB_GetPCROP2B(uint32_t *PCROP2BStartAddr, uint32_t *PCROP2BEndAddr);
-#endif
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
+#endif /* FLASH_PCROP_SUPPORT */
#if defined(FLASH_SECURABLE_MEMORY_SUPPORT)
#if defined(FLASH_DBANK_SUPPORT)
static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize, uint32_t SecSize2);
@@ -117,8 +119,8 @@
#else
static void FLASH_OB_SecMemConfig(uint32_t BootEntry, uint32_t SecSize);
static void FLASH_OB_GetSecMem(uint32_t *BootEntry, uint32_t *SecSize);
-#endif
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
+#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */
/**
* @}
*/
@@ -129,8 +131,8 @@
*/
/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions
- * @brief Extended IO operation functions
- *
+ * @brief Extended IO operation functions
+ *
@verbatim
===============================================================================
##### Extended programming operation functions #####
@@ -173,7 +175,7 @@
#if !defined(FLASH_DBANK_SUPPORT)
/* For single bank product force Banks to Bank 1 */
pEraseInit->Banks = FLASH_BANK_1;
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASS)
{
@@ -252,7 +254,7 @@
#if !defined(FLASH_DBANK_SUPPORT)
/* For single bank product force Banks to Bank 1 */
pEraseInit->Banks = FLASH_BANK_1;
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
/* Store Bank number */
pFlash.Banks = pEraseInit->Banks;
@@ -368,9 +370,9 @@
/* Configure the 2B Proprietary code readout protection */
FLASH_OB_PCROP2BConfig(pOBInit->PCROP2BStartAddr, pOBInit->PCROP2BEndAddr);
}
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
}
-#endif
+#endif /* FLASH_PCROP_SUPPORT */
#if defined(FLASH_SECURABLE_MEMORY_SUPPORT)
/* Securable Memory Area Configuration */
@@ -382,9 +384,9 @@
#else
/* Configure the securable memory area protection */
FLASH_OB_SecMemConfig(pOBInit->BootEntryPoint, pOBInit->SecSize);
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
}
-#endif
+#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */
/* Wait for last operation to be completed */
status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
@@ -441,8 +443,8 @@
FLASH_OB_GetPCROP2A(&(pOBInit->PCROP2AStartAddr), &(pOBInit->PCROP2AEndAddr));
FLASH_OB_GetPCROP2B(&(pOBInit->PCROP2BStartAddr), &(pOBInit->PCROP2BEndAddr));
pOBInit->PCROPConfig |= (OB_PCROP_ZONE2_A | OB_PCROP_ZONE2_B);
-#endif
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
+#endif /* FLASH_PCROP_SUPPORT */
#if defined(FLASH_SECURABLE_MEMORY_SUPPORT)
#if defined(FLASH_DBANK_SUPPORT)
@@ -451,8 +453,8 @@
#else
/* Get the Securable Memory Area protection */
FLASH_OB_GetSecMem(&(pOBInit->BootEntryPoint), &(pOBInit->SecSize));
-#endif
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
+#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */
}
#if defined(FLASH_ACR_DBG_SWEN)
@@ -537,12 +539,12 @@
else
#else
UNUSED(Banks);
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
{
FLASH->CR |= FLASH_CR_SEC_PROT;
}
}
-#endif
+#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */
/**
* @}
*/
@@ -598,7 +600,7 @@
#if defined(FLASH_DBANK_SUPPORT)
/* Check if page has to be erased in bank 1 or 2 */
- if(Banks != FLASH_BANK_1)
+ if (Banks != FLASH_BANK_1)
{
tmp |= FLASH_CR_BKER;
}
@@ -606,7 +608,7 @@
{
tmp &= ~FLASH_CR_BKER;
}
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
/* Set page number, Page Erase bit & Start bit */
FLASH->CR = (tmp | (FLASH_CR_STRT | (Page << FLASH_CR_PNB_Pos) | FLASH_CR_PER));
@@ -674,7 +676,7 @@
{
FLASH->WRP2BR = ((WRDPEndOffset << FLASH_WRP2BR_WRP2B_END_Pos) | WRPStartOffset);
}
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
else
{
FLASH->WRP1BR = ((WRDPEndOffset << FLASH_WRP1BR_WRP1B_END_Pos) | WRPStartOffset);
@@ -718,8 +720,8 @@
*WRPStartOffset = READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_STRT);
*WRDPEndOffset = (READ_BIT(FLASH->WRP2BR, FLASH_WRP2BR_WRP2B_END) >> FLASH_WRP2BR_WRP2B_END_Pos);
}
-#endif
-else
+#endif /* FLASH_DBANK_SUPPORT */
+ else
{
*WRPStartOffset = READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_STRT);
*WRDPEndOffset = (READ_BIT(FLASH->WRP1BR, FLASH_WRP1BR_WRP1B_END) >> FLASH_WRP1BR_WRP1B_END_Pos);
@@ -862,7 +864,7 @@
ropbase = (FLASH_BASE + FLASH_BANK_SIZE);
}
else
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
{
/* Check the parameters */
assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1AStartAddr));
@@ -931,7 +933,7 @@
ropbase = (FLASH_BASE + FLASH_BANK_SIZE);
}
else
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
{
/* Check the parameters */
assert_param(IS_FLASH_MAIN_FIRSTHALF_MEM_ADDRESS(PCROP1BStartAddr));
@@ -973,7 +975,7 @@
ropbase = (FLASH_BASE + FLASH_BANK_SIZE);
}
else
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
{
/* No Bank swap, bank 1 read only protection is on first half of Flash */
ropbase = FLASH_BASE;
@@ -1012,7 +1014,7 @@
ropbase = (FLASH_BASE + FLASH_BANK_SIZE);
}
else
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
{
/* No Bank swap, bank 1 read only protection is on first half of Flash */
ropbase = FLASH_BASE;
@@ -1193,8 +1195,8 @@
*PCROP2BEndAddr = (pcrop << FLASH_PCROP_GRANULARITY_OFFSET);
*PCROP2BEndAddr += (ropbase + FLASH_PCROP_GRANULARITY - 1U);
}
-#endif
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
+#endif /* FLASH_PCROP_SUPPORT */
#if defined(FLASH_SECURABLE_MEMORY_SUPPORT)
#if defined(FLASH_DBANK_SUPPORT)
@@ -1284,8 +1286,8 @@
*BootEntry = (secmem & FLASH_SECR_BOOT_LOCK);
*SecSize = (secmem & FLASH_SECR_SEC_SIZE);
}
-#endif
-#endif
+#endif /* FLASH_DBANK_SUPPORT */
+#endif /* FLASH_SECURABLE_MEMORY_SUPPORT */
/**
* @}
diff --git a/Src/stm32g0xx_hal_gpio.c b/Src/stm32g0xx_hal_gpio.c
index f12e8e7..0f02319 100644
--- a/Src/stm32g0xx_hal_gpio.c
+++ b/Src/stm32g0xx_hal_gpio.c
@@ -123,17 +123,9 @@
/* Private typedef -----------------------------------------------------------*/
/* Private defines ------------------------------------------------------------*/
-/** @defgroup GPIO_Private_Constants GPIO Private Constants
+/** @addtogroup GPIO_Private_Constants
* @{
*/
-#define GPIO_MODE (0x00000003u)
-#define EXTI_MODE (0x10000000u)
-#define GPIO_MODE_IT (0x00010000u)
-#define GPIO_MODE_EVT (0x00020000u)
-#define RISING_EDGE (0x00100000u)
-#define FALLING_EDGE (0x00200000u)
-#define GPIO_OUTPUT_TYPE (0x00000010u)
-
#define GPIO_NUMBER (16u)
/**
* @}
@@ -177,7 +169,6 @@
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
- assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
/* Configure the port pins */
while (((GPIO_Init->Pin) >> position) != 0x00u)
@@ -189,11 +180,11 @@
{
/*--------------------- GPIO Mode Configuration ------------------------*/
/* In case of Output or Alternate function mode selection */
- if ((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
- (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ if (((GPIO_Init->Mode & GPIO_MODE) == MODE_OUTPUT) || ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF))
{
/* Check the Speed parameter */
assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+
/* Configure the IO Speed */
temp = GPIOx->OSPEEDR;
temp &= ~(GPIO_OSPEEDR_OSPEED0 << (position * 2u));
@@ -203,18 +194,24 @@
/* Configure the IO Output Type */
temp = GPIOx->OTYPER;
temp &= ~(GPIO_OTYPER_OT0 << position) ;
- temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4u) << position);
+ temp |= (((GPIO_Init->Mode & OUTPUT_TYPE) >> OUTPUT_TYPE_Pos) << position);
GPIOx->OTYPER = temp;
}
- /* Activate the Pull-up or Pull down resistor for the current IO */
- temp = GPIOx->PUPDR;
- temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2u));
- temp |= ((GPIO_Init->Pull) << (position * 2u));
- GPIOx->PUPDR = temp;
+ if ((GPIO_Init->Mode & GPIO_MODE) != MODE_ANALOG)
+ {
+ /* Check the Pull parameter */
+ assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+ /* Activate the Pull-up or Pull down resistor for the current IO */
+ temp = GPIOx->PUPDR;
+ temp &= ~(GPIO_PUPDR_PUPD0 << (position * 2u));
+ temp |= ((GPIO_Init->Pull) << (position * 2u));
+ GPIOx->PUPDR = temp;
+ }
/* In case of Alternate function mode selection */
- if ((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+ if ((GPIO_Init->Mode & GPIO_MODE) == MODE_AF)
{
/* Check the Alternate function parameters */
assert_param(IS_GPIO_AF_INSTANCE(GPIOx));
@@ -235,7 +232,7 @@
/*--------------------- EXTI Mode Configuration ------------------------*/
/* Configure the External Interrupt or event for the current IO */
- if ((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+ if ((GPIO_Init->Mode & EXTI_MODE) != 0x00u)
{
temp = EXTI->EXTICR[position >> 2u];
temp &= ~(0x0FuL << (8u * (position & 0x03u)));
@@ -245,7 +242,7 @@
/* Clear EXTI line configuration */
temp = EXTI->IMR1;
temp &= ~(iocurrent);
- if ((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+ if ((GPIO_Init->Mode & EXTI_IT) != 0x00u)
{
temp |= iocurrent;
}
@@ -253,7 +250,7 @@
temp = EXTI->EMR1;
temp &= ~(iocurrent);
- if ((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+ if ((GPIO_Init->Mode & EXTI_EVT) != 0x00u)
{
temp |= iocurrent;
}
@@ -262,7 +259,7 @@
/* Clear Rising Falling edge configuration */
temp = EXTI->RTSR1;
temp &= ~(iocurrent);
- if ((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+ if ((GPIO_Init->Mode & TRIGGER_RISING) != 0x00u)
{
temp |= iocurrent;
}
@@ -270,7 +267,7 @@
temp = EXTI->FTSR1;
temp &= ~(iocurrent);
- if ((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+ if ((GPIO_Init->Mode & TRIGGER_FALLING) != 0x00u)
{
temp |= iocurrent;
}
diff --git a/Src/stm32g0xx_hal_hcd.c b/Src/stm32g0xx_hal_hcd.c
index df56dba..55aee18 100644
--- a/Src/stm32g0xx_hal_hcd.c
+++ b/Src/stm32g0xx_hal_hcd.c
@@ -39,7 +39,7 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2020 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
@@ -58,8 +58,7 @@
*/
#ifdef HAL_HCD_MODULE_ENABLED
-
-
+#if defined (USB_DRD_FS)
/** @defgroup HCD HCD
* @brief HCD HAL module driver
@@ -191,9 +190,9 @@
* This parameter can be a value from 0 to 255
* @param speed Current device speed.
* This parameter can be one of these values:
- * HCD_SPEED_HIGH High speed mode,
- * HCD_SPEED_FULL Full speed mode,
- * HCD_SPEED_LOW Low speed mode
+ * HCD_DEVICE_SPEED_HIGH High speed mode,
+ * HCD_DEVICE_SPEED_FULL Full speed mode,
+ * HCD_DEVICE_SPEED_LOW Low speed mode
* @param ep_type Endpoint Type.
* This parameter can be one of these values:
* USBH_EP_CONTROL Control type,
@@ -602,6 +601,12 @@
uint8_t chnum;
uint32_t epch_reg;
+ /* check if this is an USB pending IT */
+ if ((SYSCFG->IT_LINE_SR[8] & (0x1U << 2)) == 0U)
+ {
+ return;
+ }
+
/* Port Change Detected (Connection/Disconnection) */
if (__HAL_HCD_GET_FLAG(hhcd, USB_ISTR_DCON))
{
@@ -1354,7 +1359,10 @@
/**
* @brief Return the Host enumeration speed.
* @param hhcd HCD handle
- * @retval Enumeration speed
+ * @retval speed : Device speed after Host enumeration
+ * This parameter can be one of these values:
+ * @arg HCD_DEVICE_SPEED_FULL: Full speed mode
+ * @arg HCD_DEVICE_SPEED_LOW: Low speed mode
*/
uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd)
{
@@ -2492,7 +2500,7 @@
/**
* @}
*/
-
+#endif /* defined (USB_DRD_FS) */
#endif /* HAL_HCD_MODULE_ENABLED */
/**
diff --git a/Src/stm32g0xx_hal_i2c.c b/Src/stm32g0xx_hal_i2c.c
index 51771ae..c9b56a4 100644
--- a/Src/stm32g0xx_hal_i2c.c
+++ b/Src/stm32g0xx_hal_i2c.c
@@ -28,7 +28,8 @@
(+++) Configure the I2Cx interrupt priority
(+++) Enable the NVIC I2C IRQ Channel
(##) DMA Configuration if you need to use DMA process
- (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel
+ (+++) Declare a DMA_HandleTypeDef handle structure for
+ the transmit or receive channel
(+++) Enable the DMAx interface clock using
(+++) Configure the DMA handle parameters
(+++) Configure the DMA Tx or Rx channel
@@ -65,22 +66,22 @@
===================================
[..]
(+) Transmit in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Transmit_IT()
- (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
+ (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
(+) Receive in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Receive_IT()
- (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
+ (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
(+) Transmit in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Transmit_IT()
- (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
+ (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
(+) Receive in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Receive_IT()
- (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
- (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
+ (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
(+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT()
- (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
+ (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
(+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro.
This action will inform Master to generate a Stop condition to discard the communication.
@@ -93,62 +94,79 @@
[..]
(+) A specific option field manage the different steps of a sequential transfer
(+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below:
- (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode
+ (++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in
+ no sequential mode
(++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address
and data to transfer without a final stop condition
- (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address
- and data to transfer without a final stop condition, an then permit a call the same master sequential interface
- several times (like @ref HAL_I2C_Master_Seq_Transmit_IT() then @ref HAL_I2C_Master_Seq_Transmit_IT()
+ (++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with
+ start condition, address and data to transfer without a final stop condition,
+ an then permit a call the same master sequential interface several times
+ (like @ref HAL_I2C_Master_Seq_Transmit_IT() then @ref HAL_I2C_Master_Seq_Transmit_IT()
or @ref HAL_I2C_Master_Seq_Transmit_DMA() then @ref HAL_I2C_Master_Seq_Transmit_DMA())
(++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address
- and with new data to transfer if the direction change or manage only the new data to transfer
+ and with new data to transfer if the direction change or manage only the new data to
+ transfer
if no direction change and without a final stop condition in both cases
(++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address
- and with new data to transfer if the direction change or manage only the new data to transfer
+ and with new data to transfer if the direction change or manage only the new data to
+ transfer
if no direction change and with a final stop condition in both cases
- (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential
- interface several times (link with option I2C_FIRST_AND_NEXT_FRAME).
- Usage can, transfer several bytes one by one using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
- or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
- or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
- or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME).
- Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit
+ (++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition
+ after several call of the same master sequential interface several times
+ (link with option I2C_FIRST_AND_NEXT_FRAME).
+ Usage can, transfer several bytes one by one using
+ HAL_I2C_Master_Seq_Transmit_IT
+ or HAL_I2C_Master_Seq_Receive_IT
+ or HAL_I2C_Master_Seq_Transmit_DMA
+ or HAL_I2C_Master_Seq_Receive_DMA
+ with option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME.
+ Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or
+ Receive sequence permit to call the opposite interface Receive or Transmit
without stopping the communication and so generate a restart condition.
- (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential
+ (++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after
+ each call of the same master sequential
interface.
- Usage can, transfer several bytes one by one with a restart with slave address between each bytes using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME)
- or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME)
- or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME)
- or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME).
- Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition.
+ Usage can, transfer several bytes one by one with a restart with slave address between
+ each bytes using
+ HAL_I2C_Master_Seq_Transmit_IT
+ or HAL_I2C_Master_Seq_Receive_IT
+ or HAL_I2C_Master_Seq_Transmit_DMA
+ or HAL_I2C_Master_Seq_Receive_DMA
+ with option I2C_FIRST_FRAME then I2C_OTHER_FRAME.
+ Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic
+ generation of STOP condition.
(+) Different sequential I2C interfaces are listed below:
- (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT()
- or using @ref HAL_I2C_Master_Seq_Transmit_DMA()
- (+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
- (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Receive_IT()
- or using @ref HAL_I2C_Master_Seq_Receive_DMA()
- (+++) At reception end of current frame transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
+ (++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using
+ @ref HAL_I2C_Master_Seq_Transmit_IT() or using @ref HAL_I2C_Master_Seq_Transmit_DMA()
+ (+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and
+ users can add their own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
+ (++) Sequential receive in master I2C mode an amount of data in non-blocking mode using
+ @ref HAL_I2C_Master_Seq_Receive_IT() or using @ref HAL_I2C_Master_Seq_Receive_DMA()
+ (+++) At reception end of current frame transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
(++) Abort a master IT or DMA I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT()
- (+++) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
- (++) Enable/disable the Address listen mode in slave I2C mode using @ref HAL_I2C_EnableListen_IT() @ref HAL_I2C_DisableListen_IT()
- (+++) When address slave I2C match, @ref HAL_I2C_AddrCallback() is executed and user can
- add his own code to check the Address Match Code and the transmission direction request by master (Write/Read).
- (+++) At Listen mode end @ref HAL_I2C_ListenCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_ListenCpltCallback()
- (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Transmit_IT()
+ (+++) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
+ (++) Enable/disable the Address listen mode in slave I2C mode using @ref HAL_I2C_EnableListen_IT()
+ @ref HAL_I2C_DisableListen_IT()
+ (+++) When address slave I2C match, @ref HAL_I2C_AddrCallback() is executed and users can
+ add their own code to check the Address Match Code and the transmission direction request by master
+ (Write/Read).
+ (+++) At Listen mode end @ref HAL_I2C_ListenCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_ListenCpltCallback()
+ (++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using
+ @ref HAL_I2C_Slave_Seq_Transmit_IT()
or using @ref HAL_I2C_Slave_Seq_Transmit_DMA()
- (+++) At transmission end of current frame transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
- (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Receive_IT()
+ (+++) At transmission end of current frame transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and
+ users can add their own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
+ (++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using
+ @ref HAL_I2C_Slave_Seq_Receive_IT()
or using @ref HAL_I2C_Slave_Seq_Receive_DMA()
- (+++) At reception end of current frame transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
- (++) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
+ (+++) At reception end of current frame transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
+ (++) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
(++) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro.
This action will inform Master to generate a Stop condition to discard the communication.
@@ -157,39 +175,39 @@
[..]
(+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using
@ref HAL_I2C_Mem_Write_IT()
- (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback()
+ (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback()
(+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using
@ref HAL_I2C_Mem_Read_IT()
- (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback()
- (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
+ (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback()
+ (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
*** DMA mode IO operation ***
==============================
[..]
(+) Transmit in master mode an amount of data in non-blocking mode (DMA) using
@ref HAL_I2C_Master_Transmit_DMA()
- (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
+ (+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
(+) Receive in master mode an amount of data in non-blocking mode (DMA) using
@ref HAL_I2C_Master_Receive_DMA()
- (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
+ (+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
(+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using
@ref HAL_I2C_Slave_Transmit_DMA()
- (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
+ (+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
(+) Receive in slave mode an amount of data in non-blocking mode (DMA) using
@ref HAL_I2C_Slave_Receive_DMA()
- (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
- (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
+ (+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
+ (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
(+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT()
- (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
+ (+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
(+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro.
This action will inform Master to generate a Stop condition to discard the communication.
@@ -198,14 +216,14 @@
[..]
(+) Write an amount of data in non-blocking mode with DMA to a specific memory address using
@ref HAL_I2C_Mem_Write_DMA()
- (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback()
+ (+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback()
(+) Read an amount of data in non-blocking mode with DMA from a specific memory address using
@ref HAL_I2C_Mem_Read_DMA()
- (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback()
- (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
+ (+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback()
+ (+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and users can
+ add their own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
*** I2C HAL driver macros list ***
@@ -336,28 +354,48 @@
#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */
#define MAX_NBYTE_SIZE 255U
-#define SlaveAddr_SHIFT 7U
-#define SlaveAddr_MSK 0x06U
+#define SLAVE_ADDR_SHIFT 7U
+#define SLAVE_ADDR_MSK 0x06U
/* Private define for @ref PreviousState usage */
-#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | (uint32_t)HAL_I2C_STATE_BUSY_RX) & (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */
-#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */
-#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */
-#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */
-#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */
-#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */
-#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */
-#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | \
+ (uint32_t)HAL_I2C_STATE_BUSY_RX) & \
+ (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY))))
+/*!< Mask State define, keep only RX and TX bits */
+#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE))
+/*!< Default Value */
+#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \
+ (uint32_t)HAL_I2C_MODE_MASTER))
+/*!< Master Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \
+ (uint32_t)HAL_I2C_MODE_MASTER))
+/*!< Master Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \
+ (uint32_t)HAL_I2C_MODE_SLAVE))
+/*!< Slave Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \
+ (uint32_t)HAL_I2C_MODE_SLAVE))
+/*!< Slave Busy RX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | \
+ (uint32_t)HAL_I2C_MODE_MEM))
+/*!< Memory Busy TX, combinaison of State LSB and Mode enum */
+#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | \
+ (uint32_t)HAL_I2C_MODE_MEM))
+/*!< Memory Busy RX, combinaison of State LSB and Mode enum */
/* Private define to centralize the enable/disable of Interrupts */
-#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */
-#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */
-#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /* Bit field can be combinated with @ref I2C_XFER_TX_IT and @ref I2C_XFER_RX_IT */
+#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /*!< Bit field can be combinated with
+ @ref I2C_XFER_LISTEN_IT */
+#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /*!< Bit field can be combinated with
+ @ref I2C_XFER_LISTEN_IT */
+#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /*!< Bit field can be combinated with @ref I2C_XFER_TX_IT
+ and @ref I2C_XFER_RX_IT */
-#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /* Bit definition to manage addition of global Error and NACK treatment */
-#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /* Bit definition to manage only STOP evenement */
-#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /* Bit definition to manage only Reload of NBYTE */
+#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /*!< Bit definition to manage addition of global Error
+ and NACK treatment */
+#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /*!< Bit definition to manage only STOP evenement */
+#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /*!< Bit definition to manage only Reload of NBYTE */
/* Private define Sequential Transfer Options default/reset value */
#define I2C_NO_OPTION_FRAME (0xFFFF0000U)
@@ -390,21 +428,34 @@
static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode);
/* Private functions to handle IT transfer */
-static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
-static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress,
+ uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout,
+ uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress,
+ uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout,
+ uint32_t Tickstart);
/* Private functions for I2C transfer IRQ handler */
-static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
-static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
-static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
-static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags,
+ uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags,
+ uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags,
+ uint32_t ITSources);
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags,
+ uint32_t ITSources);
/* Private functions to handle flags during polling transfer */
-static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart);
-static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
-static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
-static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
-static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status,
+ uint32_t Timeout, uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout,
+ uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout,
+ uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout,
+ uint32_t Tickstart);
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout,
+ uint32_t Tickstart);
/* Private functions to centralize the enable/disable of Interrupts */
static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
@@ -417,7 +468,8 @@
static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c);
/* Private function to handle start, restart or stop a transfer */
-static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode,
+ uint32_t Request);
/* Private function to Convert Specific options */
static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c);
@@ -432,8 +484,8 @@
*/
/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
+ * @brief Initialization and Configuration functions
+ *
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
@@ -555,7 +607,8 @@
hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE;
/* Configure I2Cx: Dual mode and Own Address2 */
- hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8));
+ hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | \
+ (hi2c->Init.OwnAddress2Masks << 8));
/*---------------------------- I2Cx CR1 Configuration ----------------------*/
/* Configure I2Cx: Generalcall and NoStretch mode */
@@ -672,7 +725,8 @@
* @param pCallback pointer to the Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID,
+ pI2C_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -977,8 +1031,8 @@
*/
/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions
- * @brief Data transfers functions
- *
+ * @brief Data transfers functions
+ *
@verbatim
===============================================================================
##### IO operation functions #####
@@ -1060,7 +1114,8 @@
* @param Timeout Timeout duration
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t Timeout)
{
uint32_t tickstart;
@@ -1091,12 +1146,14 @@
if (hi2c->XferCount > MAX_NBYTE_SIZE)
{
hi2c->XferSize = MAX_NBYTE_SIZE;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE,
+ I2C_GENERATE_START_WRITE);
}
else
{
hi2c->XferSize = hi2c->XferCount;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE,
+ I2C_GENERATE_START_WRITE);
}
while (hi2c->XferCount > 0U)
@@ -1126,12 +1183,14 @@
if (hi2c->XferCount > MAX_NBYTE_SIZE)
{
hi2c->XferSize = MAX_NBYTE_SIZE;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE,
+ I2C_NO_STARTSTOP);
}
else
{
hi2c->XferSize = hi2c->XferCount;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE,
+ I2C_NO_STARTSTOP);
}
}
}
@@ -1174,7 +1233,8 @@
* @param Timeout Timeout duration
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t Timeout)
{
uint32_t tickstart;
@@ -1205,12 +1265,14 @@
if (hi2c->XferCount > MAX_NBYTE_SIZE)
{
hi2c->XferSize = MAX_NBYTE_SIZE;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE,
+ I2C_GENERATE_START_READ);
}
else
{
hi2c->XferSize = hi2c->XferCount;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE,
+ I2C_GENERATE_START_READ);
}
while (hi2c->XferCount > 0U)
@@ -1241,12 +1303,14 @@
if (hi2c->XferCount > MAX_NBYTE_SIZE)
{
hi2c->XferSize = MAX_NBYTE_SIZE;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE,
+ I2C_NO_STARTSTOP);
}
else
{
hi2c->XferSize = hi2c->XferCount;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE,
+ I2C_NO_STARTSTOP);
}
}
}
@@ -1287,7 +1351,8 @@
* @param Timeout Timeout duration
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t Timeout)
{
uint32_t tickstart;
@@ -1424,7 +1489,8 @@
* @param Timeout Timeout duration
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t Timeout)
{
uint32_t tickstart;
@@ -1550,7 +1616,8 @@
* @param Size Amount of data to be sent
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size)
{
uint32_t xfermode;
@@ -1598,7 +1665,8 @@
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
/* possible to enable all of these */
- /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
+ I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
return HAL_OK;
@@ -1619,7 +1687,8 @@
* @param Size Amount of data to be sent
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size)
{
uint32_t xfermode;
@@ -1667,7 +1736,8 @@
/* Enable ERR, TC, STOP, NACK, RXI interrupt */
/* possible to enable all of these */
- /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
+ I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
return HAL_OK;
@@ -1716,7 +1786,8 @@
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
/* possible to enable all of these */
- /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
+ I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
return HAL_OK;
@@ -1765,7 +1836,8 @@
/* Enable ERR, TC, STOP, NACK, RXI interrupt */
/* possible to enable all of these */
- /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
+ I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
return HAL_OK;
@@ -1786,7 +1858,8 @@
* @param Size Amount of data to be sent
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size)
{
uint32_t xfermode;
HAL_StatusTypeDef dmaxferstatus;
@@ -1837,7 +1910,8 @@
hi2c->hdmatx->XferAbortCallback = NULL;
/* Enable the DMA channel */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR,
+ hi2c->XferSize);
}
else
{
@@ -1897,7 +1971,8 @@
/* Send Slave Address */
/* Set NBYTES to write and generate START condition */
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE,
+ I2C_GENERATE_START_WRITE);
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
@@ -1907,7 +1982,8 @@
process unlock */
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
/* possible to enable all of these */
- /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
+ I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
}
@@ -1929,7 +2005,8 @@
* @param Size Amount of data to be sent
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size)
{
uint32_t xfermode;
HAL_StatusTypeDef dmaxferstatus;
@@ -1980,7 +2057,8 @@
hi2c->hdmarx->XferAbortCallback = NULL;
/* Enable the DMA channel */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData,
+ hi2c->XferSize);
}
else
{
@@ -2040,7 +2118,8 @@
/* Send Slave Address */
/* Set NBYTES to read and generate START condition */
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE,
+ I2C_GENERATE_START_READ);
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
@@ -2050,7 +2129,8 @@
process unlock */
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
/* possible to enable all of these */
- /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
+ I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
}
@@ -2108,7 +2188,8 @@
hi2c->hdmatx->XferAbortCallback = NULL;
/* Enable the DMA channel */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR,
+ hi2c->XferSize);
}
else
{
@@ -2211,7 +2292,8 @@
hi2c->hdmarx->XferAbortCallback = NULL;
/* Enable the DMA channel */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData,
+ hi2c->XferSize);
}
else
{
@@ -2280,7 +2362,8 @@
* @param Timeout Timeout duration
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
{
uint32_t tickstart;
@@ -2363,17 +2446,18 @@
if (hi2c->XferCount > MAX_NBYTE_SIZE)
{
hi2c->XferSize = MAX_NBYTE_SIZE;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE,
+ I2C_NO_STARTSTOP);
}
else
{
hi2c->XferSize = hi2c->XferCount;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE,
+ I2C_NO_STARTSTOP);
}
}
- }
- while (hi2c->XferCount > 0U);
+ } while (hi2c->XferCount > 0U);
/* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
/* Wait until STOPF flag is reset */
@@ -2415,7 +2499,8 @@
* @param Timeout Timeout duration
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
{
uint32_t tickstart;
@@ -2463,12 +2548,14 @@
if (hi2c->XferCount > MAX_NBYTE_SIZE)
{
hi2c->XferSize = MAX_NBYTE_SIZE;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE,
+ I2C_GENERATE_START_READ);
}
else
{
hi2c->XferSize = hi2c->XferCount;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE,
+ I2C_GENERATE_START_READ);
}
do
@@ -2499,16 +2586,17 @@
if (hi2c->XferCount > MAX_NBYTE_SIZE)
{
hi2c->XferSize = MAX_NBYTE_SIZE;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE,
+ I2C_NO_STARTSTOP);
}
else
{
hi2c->XferSize = hi2c->XferCount;
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE,
+ I2C_NO_STARTSTOP);
}
}
- }
- while (hi2c->XferCount > 0U);
+ } while (hi2c->XferCount > 0U);
/* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
/* Wait until STOPF flag is reset */
@@ -2548,7 +2636,8 @@
* @param Size Amount of data to be sent
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
{
uint32_t tickstart;
uint32_t xfermode;
@@ -2597,7 +2686,8 @@
}
/* Send Slave Address and Memory Address */
- if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart)
+ != HAL_OK)
{
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
@@ -2616,7 +2706,8 @@
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
/* possible to enable all of these */
- /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
+ I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
return HAL_OK;
@@ -2639,7 +2730,8 @@
* @param Size Amount of data to be sent
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
{
uint32_t tickstart;
uint32_t xfermode;
@@ -2707,7 +2799,8 @@
/* Enable ERR, TC, STOP, NACK, RXI interrupt */
/* possible to enable all of these */
- /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
+ I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
return HAL_OK;
@@ -2729,7 +2822,8 @@
* @param Size Amount of data to be sent
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
{
uint32_t tickstart;
uint32_t xfermode;
@@ -2779,7 +2873,8 @@
}
/* Send Slave Address and Memory Address */
- if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
+ if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart)
+ != HAL_OK)
{
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
@@ -2800,7 +2895,8 @@
hi2c->hdmatx->XferAbortCallback = NULL;
/* Enable the DMA channel */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR,
+ hi2c->XferSize);
}
else
{
@@ -2873,7 +2969,8 @@
* @param Size Amount of data to be read
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
+ uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
{
uint32_t tickstart;
uint32_t xfermode;
@@ -2943,7 +3040,8 @@
hi2c->hdmarx->XferAbortCallback = NULL;
/* Enable the DMA channel */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData,
+ hi2c->XferSize);
}
else
{
@@ -3014,7 +3112,8 @@
* @param Timeout Timeout duration
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials,
+ uint32_t Timeout)
{
uint32_t tickstart;
@@ -3124,8 +3223,7 @@
/* Increment Trials */
I2C_Trials++;
- }
- while (I2C_Trials < Trials);
+ } while (I2C_Trials < Trials);
/* Update I2C state */
hi2c->State = HAL_I2C_STATE_READY;
@@ -3156,7 +3254,8 @@
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t XferOptions)
{
uint32_t xfermode;
uint32_t xferrequest = I2C_GENERATE_START_WRITE;
@@ -3191,9 +3290,11 @@
xfermode = hi2c->XferOptions;
}
- /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
+ /* If transfer direction not change and there is no request to start another frame,
+ do not generate Restart Condition */
/* Mean Previous state is same as current state */
- if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
+ if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \
+ (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
{
xferrequest = I2C_NO_STARTSTOP;
}
@@ -3240,7 +3341,8 @@
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t XferOptions)
{
uint32_t xfermode;
uint32_t xferrequest = I2C_GENERATE_START_WRITE;
@@ -3276,9 +3378,11 @@
xfermode = hi2c->XferOptions;
}
- /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
+ /* If transfer direction not change and there is no request to start another frame,
+ do not generate Restart Condition */
/* Mean Previous state is same as current state */
- if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
+ if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && \
+ (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
{
xferrequest = I2C_NO_STARTSTOP;
}
@@ -3309,7 +3413,8 @@
hi2c->hdmatx->XferAbortCallback = NULL;
/* Enable the DMA channel */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR,
+ hi2c->XferSize);
}
else
{
@@ -3368,7 +3473,8 @@
/* Send Slave Address */
/* Set NBYTES to write and generate START condition */
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE,
+ I2C_GENERATE_START_WRITE);
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
@@ -3378,7 +3484,8 @@
process unlock */
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
/* possible to enable all of these */
- /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
+ I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
}
@@ -3402,7 +3509,8 @@
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t XferOptions)
{
uint32_t xfermode;
uint32_t xferrequest = I2C_GENERATE_START_READ;
@@ -3437,9 +3545,11 @@
xfermode = hi2c->XferOptions;
}
- /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
+ /* If transfer direction not change and there is no request to start another frame,
+ do not generate Restart Condition */
/* Mean Previous state is same as current state */
- if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
+ if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \
+ (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
{
xferrequest = I2C_NO_STARTSTOP;
}
@@ -3486,7 +3596,8 @@
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t XferOptions)
{
uint32_t xfermode;
uint32_t xferrequest = I2C_GENERATE_START_READ;
@@ -3522,9 +3633,11 @@
xfermode = hi2c->XferOptions;
}
- /* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
+ /* If transfer direction not change and there is no request to start another frame,
+ do not generate Restart Condition */
/* Mean Previous state is same as current state */
- if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
+ if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && \
+ (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
{
xferrequest = I2C_NO_STARTSTOP;
}
@@ -3555,7 +3668,8 @@
hi2c->hdmarx->XferAbortCallback = NULL;
/* Enable the DMA channel */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData,
+ hi2c->XferSize);
}
else
{
@@ -3614,7 +3728,8 @@
/* Send Slave Address */
/* Set NBYTES to read and generate START condition */
- I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+ I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE,
+ I2C_GENERATE_START_READ);
/* Process Unlocked */
__HAL_UNLOCK(hi2c);
@@ -3624,7 +3739,8 @@
process unlock */
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
/* possible to enable all of these */
- /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+ /* I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI |
+ I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
}
@@ -3646,7 +3762,8 @@
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions)
{
/* Check the parameters */
assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
@@ -3741,7 +3858,8 @@
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions)
{
HAL_StatusTypeDef dmaxferstatus;
@@ -3843,7 +3961,8 @@
hi2c->hdmatx->XferAbortCallback = NULL;
/* Enable the DMA channel */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR,
+ hi2c->XferSize);
}
else
{
@@ -3920,7 +4039,8 @@
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions)
{
/* Check the parameters */
assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
@@ -4015,7 +4135,8 @@
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions)
{
HAL_StatusTypeDef dmaxferstatus;
@@ -4117,7 +4238,8 @@
hi2c->hdmarx->XferAbortCallback = NULL;
/* Enable the DMA channel */
- dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+ dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR,
+ (uint32_t)pData, hi2c->XferSize);
}
else
{
@@ -4300,8 +4422,8 @@
*/
/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
- * @{
- */
+ * @{
+ */
/**
* @brief This function handles I2C event interrupt request.
@@ -4335,7 +4457,8 @@
uint32_t tmperror;
/* I2C Bus error interrupt occurred ------------------------------------*/
- if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
+ if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
{
hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
@@ -4344,7 +4467,8 @@
}
/* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
- if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
+ if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
{
hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
@@ -4353,7 +4477,8 @@
}
/* I2C Arbitration Loss error interrupt occurred -------------------------------------*/
- if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
+ if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
{
hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
@@ -4539,8 +4664,8 @@
*/
/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
- * @brief Peripheral State, Mode and Error functions
- *
+ * @brief Peripheral State, Mode and Error functions
+ *
@verbatim
===============================================================================
##### Peripheral State, Mode and Error functions #####
@@ -4577,11 +4702,11 @@
}
/**
-* @brief Return the I2C error code.
+ * @brief Return the I2C error code.
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
* the configuration information for the specified I2C.
-* @retval I2C Error Code
-*/
+ * @retval I2C Error Code
+ */
uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
{
return hi2c->ErrorCode;
@@ -4607,7 +4732,8 @@
* @param ITSources Interrupt sources enabled.
* @retval HAL status
*/
-static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags,
+ uint32_t ITSources)
{
uint16_t devaddress;
uint32_t tmpITFlags = ITFlags;
@@ -4615,7 +4741,8 @@
/* Process Locked */
__HAL_LOCK(hi2c);
- if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
+ if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
{
/* Clear NACK Flag */
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
@@ -4628,7 +4755,8 @@
/* Flush TX register */
I2C_Flush_TXDR(hi2c);
}
- else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET))
+ else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET))
{
/* Remove RXNE flag on temporary variable as read done */
tmpITFlags &= ~I2C_FLAG_RXNE;
@@ -4642,7 +4770,8 @@
hi2c->XferSize--;
hi2c->XferCount--;
}
- else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))
+ else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))
{
/* Write data to TXDR */
hi2c->Instance->TXDR = *hi2c->pBuffPtr;
@@ -4653,7 +4782,8 @@
hi2c->XferSize--;
hi2c->XferCount--;
}
- else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
+ else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
{
if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U))
{
@@ -4669,11 +4799,13 @@
hi2c->XferSize = hi2c->XferCount;
if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
{
- I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP);
+ I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize,
+ hi2c->XferOptions, I2C_NO_STARTSTOP);
}
else
{
- I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+ I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize,
+ I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
}
}
}
@@ -4693,7 +4825,8 @@
}
}
}
- else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
+ else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
{
if (hi2c->XferCount == 0U)
{
@@ -4724,7 +4857,8 @@
/* Nothing to do */
}
- if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
+ if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
{
/* Call I2C Master complete process */
I2C_ITMasterCplt(hi2c, tmpITFlags);
@@ -4744,7 +4878,8 @@
* @param ITSources Interrupt sources enabled.
* @retval HAL status
*/
-static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags,
+ uint32_t ITSources)
{
uint32_t tmpoptions = hi2c->XferOptions;
uint32_t tmpITFlags = ITFlags;
@@ -4753,13 +4888,15 @@
__HAL_LOCK(hi2c);
/* Check if STOPF is set */
- if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
+ if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
{
/* Call I2C Slave complete process */
I2C_ITSlaveCplt(hi2c, tmpITFlags);
}
- if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
+ if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
{
/* Check that I2C transfer finished */
/* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
@@ -4767,7 +4904,9 @@
/* So clear Flag NACKF only */
if (hi2c->XferCount == 0U)
{
- if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */
+ if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME))
+ /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for
+ Warning[Pa134]: left and right operands are identical */
{
/* Call I2C Listen complete process */
I2C_ITListenCplt(hi2c, tmpITFlags);
@@ -4806,7 +4945,8 @@
}
}
}
- else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET))
+ else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET))
{
if (hi2c->XferCount > 0U)
{
@@ -4827,15 +4967,17 @@
I2C_ITSlaveSeqCplt(hi2c);
}
}
- else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET))
+ else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET))
{
I2C_ITAddrCplt(hi2c, tmpITFlags);
}
- else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))
+ else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))
{
/* Write data to TXDR only if XferCount not reach "0" */
/* A TXIS flag can be set, during STOP treatment */
- /* Check if all data have already been sent */
+ /* Check if all Data have already been sent */
/* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */
if (hi2c->XferCount > 0U)
{
@@ -4877,7 +5019,8 @@
* @param ITSources Interrupt sources enabled.
* @retval HAL status
*/
-static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags,
+ uint32_t ITSources)
{
uint16_t devaddress;
uint32_t xfermode;
@@ -4885,7 +5028,8 @@
/* Process Locked */
__HAL_LOCK(hi2c);
- if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
+ if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
{
/* Clear NACK Flag */
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
@@ -4901,7 +5045,8 @@
/* Flush TX register */
I2C_Flush_TXDR(hi2c);
}
- else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
+ else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
{
/* Disable TC interrupt */
__HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI);
@@ -4962,7 +5107,8 @@
}
}
}
- else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
+ else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
{
if (hi2c->XferCount == 0U)
{
@@ -4988,7 +5134,8 @@
I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
}
}
- else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
+ else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
{
/* Call I2C Master complete process */
I2C_ITMasterCplt(hi2c, ITFlags);
@@ -5012,7 +5159,8 @@
* @param ITSources Interrupt sources enabled.
* @retval HAL status
*/
-static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
+static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags,
+ uint32_t ITSources)
{
uint32_t tmpoptions = hi2c->XferOptions;
uint32_t treatdmanack = 0U;
@@ -5022,13 +5170,15 @@
__HAL_LOCK(hi2c);
/* Check if STOPF is set */
- if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
+ if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
{
/* Call I2C Slave complete process */
I2C_ITSlaveCplt(hi2c, ITFlags);
}
- if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
+ if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
{
/* Check that I2C transfer finished */
/* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
@@ -5063,7 +5213,9 @@
if (treatdmanack == 1U)
{
- if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME)) /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */
+ if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME))
+ /* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for
+ Warning[Pa134]: left and right operands are identical */
{
/* Call I2C Listen complete process */
I2C_ITListenCplt(hi2c, ITFlags);
@@ -5124,7 +5276,8 @@
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
}
}
- else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET))
+ else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && \
+ (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET))
{
I2C_ITAddrCplt(hi2c, ITFlags);
}
@@ -5151,7 +5304,9 @@
* @param Tickstart Tick start value
* @retval HAL status
*/
-static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress,
+ uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout,
+ uint32_t Tickstart)
{
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
@@ -5204,7 +5359,9 @@
* @param Tickstart Tick start value
* @retval HAL status
*/
-static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress,
+ uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout,
+ uint32_t Tickstart)
{
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE);
@@ -5272,7 +5429,7 @@
/* If 10bits addressing mode is selected */
if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
{
- if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK))
+ if ((slaveaddrcode & SLAVE_ADDR_MSK) == ((ownadd1code >> SLAVE_ADDR_SHIFT) & SLAVE_ADDR_MSK))
{
slaveaddrcode = ownadd1code;
hi2c->AddrEventCount++;
@@ -5868,7 +6025,8 @@
/* Abort DMA TX transfer if any */
tmppreviousstate = hi2c->PreviousState;
- if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX)))
+ if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \
+ (tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX)))
{
if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
{
@@ -5897,7 +6055,8 @@
}
}
/* Abort DMA RX transfer if any */
- else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX)))
+ else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \
+ (tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX)))
{
if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
{
@@ -5997,7 +6156,8 @@
*/
static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
{
- I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+ /* Derogation MISRAC2012-Rule-11.5 */
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
/* Disable DMA Request */
hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
@@ -6025,7 +6185,8 @@
}
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize) != HAL_OK)
+ if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR,
+ hi2c->XferSize) != HAL_OK)
{
/* Call the corresponding callback to inform upper layer of End of Transfer */
I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
@@ -6045,7 +6206,8 @@
*/
static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
{
- I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+ /* Derogation MISRAC2012-Rule-11.5 */
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
uint32_t tmpoptions = hi2c->XferOptions;
if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME))
@@ -6072,7 +6234,8 @@
*/
static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
{
- I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+ /* Derogation MISRAC2012-Rule-11.5 */
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
/* Disable DMA Request */
hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
@@ -6100,7 +6263,8 @@
}
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize) != HAL_OK)
+ if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr,
+ hi2c->XferSize) != HAL_OK)
{
/* Call the corresponding callback to inform upper layer of End of Transfer */
I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
@@ -6120,7 +6284,8 @@
*/
static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
{
- I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+ /* Derogation MISRAC2012-Rule-11.5 */
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
uint32_t tmpoptions = hi2c->XferOptions;
if ((__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) && \
@@ -6147,7 +6312,8 @@
*/
static void I2C_DMAError(DMA_HandleTypeDef *hdma)
{
- I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+ /* Derogation MISRAC2012-Rule-11.5 */
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
/* Disable Acknowledge */
hi2c->Instance->CR2 |= I2C_CR2_NACK;
@@ -6164,7 +6330,8 @@
*/
static void I2C_DMAAbort(DMA_HandleTypeDef *hdma)
{
- I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
+ /* Derogation MISRAC2012-Rule-11.5 */
+ I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
/* Reset AbortCpltCallback */
if (hi2c->hdmatx != NULL)
@@ -6189,7 +6356,8 @@
* @param Tickstart Tick start value
* @retval HAL status
*/
-static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout, uint32_t Tickstart)
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status,
+ uint32_t Timeout, uint32_t Tickstart)
{
while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)
{
@@ -6219,7 +6387,8 @@
* @param Tickstart Tick start value
* @retval HAL status
*/
-static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout,
+ uint32_t Tickstart)
{
while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)
{
@@ -6256,7 +6425,8 @@
* @param Tickstart Tick start value
* @retval HAL status
*/
-static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout,
+ uint32_t Tickstart)
{
while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
{
@@ -6290,7 +6460,8 @@
* @param Tickstart Tick start value
* @retval HAL status
*/
-static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout,
+ uint32_t Tickstart)
{
while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)
{
@@ -6357,6 +6528,12 @@
{
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
{
+ /* In case of Soft End condition, generate the STOP condition */
+ if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
+ {
+ /* Generate Stop */
+ hi2c->Instance->CR2 |= I2C_CR2_STOP;
+ }
/* Wait until STOP Flag is reset */
/* AutoEnd should be initiate after AF */
while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
@@ -6421,7 +6598,8 @@
* @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request.
* @retval None
*/
-static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode,
+ uint32_t Request)
{
/* Check the parameters */
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
@@ -6429,8 +6607,13 @@
assert_param(IS_TRANSFER_REQUEST(Request));
/* update CR2 register */
- MODIFY_REG(hi2c->Instance->CR2, ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP)), \
- (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request));
+ MODIFY_REG(hi2c->Instance->CR2,
+ ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \
+ (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | \
+ I2C_CR2_START | I2C_CR2_STOP)), \
+ (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \
+ (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \
+ (uint32_t)Mode | (uint32_t)Request));
}
/**
diff --git a/Src/stm32g0xx_hal_i2c_ex.c b/Src/stm32g0xx_hal_i2c_ex.c
index 88b8a2e..f7c0bdb 100644
--- a/Src/stm32g0xx_hal_i2c_ex.c
+++ b/Src/stm32g0xx_hal_i2c_ex.c
@@ -71,17 +71,15 @@
* @{
*/
-/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
- * @brief Extended features functions
- *
+/** @defgroup I2CEx_Exported_Functions_Group1 Filter Mode Functions
+ * @brief Filter Mode Functions
+ *
@verbatim
===============================================================================
- ##### Extended features functions #####
+ ##### Filter Mode Functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure Noise Filters
- (+) Configure Wake Up Feature
- (+) Configure Fast Mode Plus
@endverbatim
* @{
@@ -182,6 +180,23 @@
return HAL_BUSY;
}
}
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_Exported_Functions_Group2 WakeUp Mode Functions
+ * @brief WakeUp Mode Functions
+ *
+@verbatim
+ ===============================================================================
+ ##### WakeUp Mode Functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Wake Up Feature
+
+@endverbatim
+ * @{
+ */
/**
* @brief Enable I2C wakeup from Stop mode(s).
@@ -260,6 +275,23 @@
return HAL_BUSY;
}
}
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_Exported_Functions_Group3 Fast Mode Plus Functions
+ * @brief Fast Mode Plus Functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Fast Mode Plus Functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+ (+) Configure Fast Mode Plus
+
+@endverbatim
+ * @{
+ */
/**
* @brief Enable the I2C fast mode plus driving capability.
@@ -314,7 +346,6 @@
/* Disable fast mode plus driving capability for selected pin */
CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
}
-
/**
* @}
*/
diff --git a/Src/stm32g0xx_hal_i2s.c b/Src/stm32g0xx_hal_i2s.c
index 9560e2c..f6bc39f 100644
--- a/Src/stm32g0xx_hal_i2s.c
+++ b/Src/stm32g0xx_hal_i2s.c
@@ -356,7 +356,7 @@
#else
/* Get the source clock value: based on System Clock value */
i2sclk = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_I2S1);
-#endif
+#endif /* RCC_PERIPHCLK_I2S2 */
/* Compute the Real divider depending on the MCLK output state, with a floating point */
if (hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
{
@@ -755,7 +755,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @param Timeout Timeout duration
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
@@ -872,7 +872,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @param Timeout Timeout duration
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
@@ -973,7 +973,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
* @retval HAL status
@@ -1037,7 +1037,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
* @note It is recommended to use DMA for the I2S receiver to avoid de-synchronization
@@ -1103,7 +1103,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
* @retval HAL status
@@ -1194,7 +1194,7 @@
* @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
* configuration phase, the Size parameter means the number of 16-bit data length
* in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
+ * the Size parameter means the number of 24-bit or 32-bit data length.
* @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
* between Master and Slave(example: audio streaming).
* @retval HAL status
diff --git a/Src/stm32g0xx_hal_irda.c b/Src/stm32g0xx_hal_irda.c
index c25606b..3a7d817 100644
--- a/Src/stm32g0xx_hal_irda.c
+++ b/Src/stm32g0xx_hal_irda.c
@@ -40,7 +40,8 @@
(+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
(+++) Configure the DMA Tx/Rx channel.
(+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.
+ (+++) Configure the priority and enable the NVIC for the transfer
+ complete interrupt on the DMA Tx/Rx channel.
(#) Program the Baud Rate, Word Length and Parity and Mode(Receiver/Transmitter),
the normal or low power mode and the clock prescaler in the hirda handle Init structure.
@@ -612,43 +613,45 @@
switch (CallbackID)
{
case HAL_IRDA_TX_HALFCOMPLETE_CB_ID :
- hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */
+ hirda->TxHalfCpltCallback = HAL_IRDA_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */
break;
case HAL_IRDA_TX_COMPLETE_CB_ID :
- hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */
+ hirda->TxCpltCallback = HAL_IRDA_TxCpltCallback; /* Legacy weak TxCpltCallback */
break;
case HAL_IRDA_RX_HALFCOMPLETE_CB_ID :
- hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
+ hirda->RxHalfCpltCallback = HAL_IRDA_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
break;
case HAL_IRDA_RX_COMPLETE_CB_ID :
- hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */
+ hirda->RxCpltCallback = HAL_IRDA_RxCpltCallback; /* Legacy weak RxCpltCallback */
break;
case HAL_IRDA_ERROR_CB_ID :
- hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */
+ hirda->ErrorCallback = HAL_IRDA_ErrorCallback; /* Legacy weak ErrorCallback */
break;
case HAL_IRDA_ABORT_COMPLETE_CB_ID :
- hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
+ hirda->AbortCpltCallback = HAL_IRDA_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
break;
case HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID :
- hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */
+ hirda->AbortTransmitCpltCallback = HAL_IRDA_AbortTransmitCpltCallback; /* Legacy weak
+ AbortTransmitCpltCallback */
break;
case HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID :
- hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */
+ hirda->AbortReceiveCpltCallback = HAL_IRDA_AbortReceiveCpltCallback; /* Legacy weak
+ AbortReceiveCpltCallback */
break;
case HAL_IRDA_MSPINIT_CB_ID :
- hirda->MspInitCallback = HAL_IRDA_MspInit; /* Legacy weak MspInitCallback */
+ hirda->MspInitCallback = HAL_IRDA_MspInit; /* Legacy weak MspInitCallback */
break;
case HAL_IRDA_MSPDEINIT_CB_ID :
- hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; /* Legacy weak MspDeInitCallback */
+ hirda->MspDeInitCallback = HAL_IRDA_MspDeInit; /* Legacy weak MspDeInitCallback */
break;
default :
@@ -771,13 +774,16 @@
(#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
Errors are handled as follows :
(++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is
- to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception .
- Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type,
- and HAL_IRDA_ErrorCallback() user callback is executed. Transfer is kept ongoing on IRDA side.
+ to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error
+ in Interrupt mode reception .
+ Received character is then retrieved and stored in Rx buffer, Error code is set to allow user
+ to identify error type, and HAL_IRDA_ErrorCallback() user callback is executed.
+ Transfer is kept ongoing on IRDA side.
If user wants to abort it, Abort services should be called by user.
(++) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode.
- Error code is set to allow user to identify error type, and HAL_IRDA_ErrorCallback() user callback is executed.
+ Error code is set to allow user to identify error type, and
+ HAL_IRDA_ErrorCallback() user callback is executed.
@endverbatim
* @{
@@ -1482,7 +1488,8 @@
HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda)
{
/* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE));
+ CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | \
+ USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE));
CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
/* Disable the IRDA DMA Tx request if enabled */
@@ -1680,7 +1687,8 @@
uint32_t abortcplt = 1U;
/* Disable TXEIE, TCIE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE));
+ CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | \
+ USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE));
CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
/* If DMA Tx and/or DMA Rx Handles are associated to IRDA Handle, DMA Abort complete callbacks should be initialised
@@ -2338,7 +2346,7 @@
uint32_t tmpreg;
IRDA_ClockSourceTypeDef clocksource;
HAL_StatusTypeDef ret = HAL_OK;
- const uint16_t IRDAPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U};
+ static const uint16_t IRDAPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U};
uint32_t pclk;
/* Check the communication parameters */
@@ -2475,7 +2483,8 @@
{
if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
{
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error)
+ interrupts for the interrupt process */
CLEAR_BIT(hirda->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE));
CLEAR_BIT(hirda->Instance->CR3, USART_CR3_EIE);
diff --git a/Src/stm32g0xx_hal_iwdg.c b/Src/stm32g0xx_hal_iwdg.c
index d7b305a..49c8d71 100644
--- a/Src/stm32g0xx_hal_iwdg.c
+++ b/Src/stm32g0xx_hal_iwdg.c
@@ -65,13 +65,13 @@
(++) Configure the IWDG prescaler and counter reload value. This reload
value will be loaded in the IWDG counter each time the watchdog is
reloaded, then the IWDG will start counting down from this value.
- (++) Wait for status flags to be reset.
(++) Depending on window parameter:
(+++) If Window Init parameter is same as Window register value,
nothing more is done but reload counter value in order to exit
function with exact time base.
(+++) Else modify Window register. This will automatically reload
watchdog counter.
+ (++) Wait for status flags to be reset.
(#) Then the application program must refresh the IWDG counter at regular
intervals during normal operation to prevent an MCU reset, using
@@ -121,11 +121,14 @@
/* Status register needs up to 5 LSI clock periods divided by the clock
prescaler to be updated. The number of LSI clock periods is upper-rounded to
6 for the timeout value calculation.
- The timeout value is also calculated using the highest prescaler (256) and
+ The timeout value is calculated using the highest prescaler (256) and
the LSI_VALUE constant. The value of this constant can be changed by the user
to take into account possible LSI clock period variations.
- The timeout value is multiplied by 1000 to be converted in milliseconds. */
-#define HAL_IWDG_DEFAULT_TIMEOUT ((6UL * 256UL * 1000UL) / LSI_VALUE)
+ The timeout value is multiplied by 1000 to be converted in milliseconds.
+ LSI startup time is also considered here by adding LSI_STARTUP_TIMEOUT
+ converted in milliseconds. */
+#define HAL_IWDG_DEFAULT_TIMEOUT (((6UL * 256UL * 1000UL) / LSI_VALUE) + ((LSI_STARTUP_TIME / 1000UL) + 1UL))
+#define IWDG_KERNEL_UPDATE_FLAGS (IWDG_SR_WVU | IWDG_SR_RVU | IWDG_SR_PVU)
/**
* @}
*/
@@ -196,11 +199,14 @@
tickstart = HAL_GetTick();
/* Wait for register to be updated */
- while (hiwdg->Instance->SR != 0x00u)
+ while ((hiwdg->Instance->SR & IWDG_KERNEL_UPDATE_FLAGS) != 0x00u)
{
if ((HAL_GetTick() - tickstart) > HAL_IWDG_DEFAULT_TIMEOUT)
{
- return HAL_TIMEOUT;
+ if ((hiwdg->Instance->SR & IWDG_KERNEL_UPDATE_FLAGS) != 0x00u)
+ {
+ return HAL_TIMEOUT;
+ }
}
}
@@ -223,6 +229,7 @@
return HAL_OK;
}
+
/**
* @}
*/
@@ -242,7 +249,6 @@
* @{
*/
-
/**
* @brief Refresh the IWDG.
* @param hiwdg pointer to a IWDG_HandleTypeDef structure that contains
@@ -258,6 +264,7 @@
return HAL_OK;
}
+
/**
* @}
*/
diff --git a/Src/stm32g0xx_hal_lptim.c b/Src/stm32g0xx_hal_lptim.c
index 3474905..b6b51ba 100644
--- a/Src/stm32g0xx_hal_lptim.c
+++ b/Src/stm32g0xx_hal_lptim.c
@@ -188,10 +188,10 @@
*/
#if defined(LPTIM2)
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(__INSTANCE__) \
- (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT())
+ (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_ENABLE_IT())
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT(__INSTANCE__) \
- (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT())
+ (((__INSTANCE__) == LPTIM1) ? __HAL_LPTIM_LPTIM1_EXTI_DISABLE_IT() : __HAL_LPTIM_LPTIM2_EXTI_DISABLE_IT())
#else
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(__INSTANCE__) __HAL_LPTIM_LPTIM1_EXTI_ENABLE_IT()
@@ -215,8 +215,8 @@
*/
/** @defgroup LPTIM_Exported_Functions_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions.
- *
+ * @brief Initialization and Configuration functions.
+ *
@verbatim
==============================================================================
##### Initialization and de-initialization functions #####
@@ -253,19 +253,17 @@
assert_param(IS_LPTIM_CLOCK_SOURCE(hlptim->Init.Clock.Source));
assert_param(IS_LPTIM_CLOCK_PRESCALER(hlptim->Init.Clock.Prescaler));
- if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
{
assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
+ assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime));
}
assert_param(IS_LPTIM_TRG_SOURCE(hlptim->Init.Trigger.Source));
if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE)
{
assert_param(IS_LPTIM_EXT_TRG_POLARITY(hlptim->Init.Trigger.ActiveEdge));
- }
- if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC)
- {
assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime));
- assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime));
}
assert_param(IS_LPTIM_OUTPUT_POLARITY(hlptim->Init.OutputPolarity));
assert_param(IS_LPTIM_UPDATE_MODE(hlptim->Init.UpdateMode));
@@ -299,21 +297,18 @@
/* Get the LPTIMx CFGR value */
tmpcfgr = hlptim->Instance->CFGR;
- if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
{
- tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL));
+ tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL | LPTIM_CFGR_CKFLT));
}
if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE)
{
- tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRIGSEL));
- }
- if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC)
- {
- tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRGFLT | LPTIM_CFGR_CKFLT));
+ tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGSEL));
}
- /* Clear CKSEL, CKPOL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */
- tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_CKPOL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD |
+ /* Clear CKSEL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */
+ tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD |
LPTIM_CFGR_WAVPOL | LPTIM_CFGR_PRESC | LPTIM_CFGR_COUNTMODE));
/* Set initialization parameters */
@@ -332,19 +327,21 @@
hlptim->Init.UltraLowPowerClock.SampleTime);
}
- /* Configure the active edge or edges used by the counter only if LPTIM is
- * clocked by an external clock source
- */
- if (hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ /* Configure LPTIM external clock polarity and digital filter */
+ if ((hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_ULPTIM)
+ || (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
{
- tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity);
+ tmpcfgr |= (hlptim->Init.UltraLowPowerClock.Polarity |
+ hlptim->Init.UltraLowPowerClock.SampleTime);
}
+ /* Configure LPTIM external trigger */
if (hlptim->Init.Trigger.Source != LPTIM_TRIGSOURCE_SOFTWARE)
{
/* Enable External trigger and set the trigger source */
- tmpcfgr |= (hlptim->Init.Trigger.Source |
- hlptim->Init.Trigger.ActiveEdge);
+ tmpcfgr |= (hlptim->Init.Trigger.Source |
+ hlptim->Init.Trigger.ActiveEdge |
+ hlptim->Init.Trigger.SampleTime);
}
/* Write to LPTIMx CFGR */
@@ -458,8 +455,8 @@
*/
/** @defgroup LPTIM_Exported_Functions_Group2 LPTIM Start-Stop operation functions
- * @brief Start-Stop operation functions.
- *
+ * @brief Start-Stop operation functions.
+ *
@verbatim
==============================================================================
##### LPTIM Start Stop operation functions #####
@@ -563,7 +560,7 @@
return HAL_TIMEOUT;
}
- /* Change the TIM state*/
+ /* Change the LPTIM state*/
hlptim->State = HAL_LPTIM_STATE_READY;
/* Return function status */
@@ -699,7 +696,7 @@
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
}
- /* Change the TIM state*/
+ /* Change the LPTIM state*/
hlptim->State = HAL_LPTIM_STATE_READY;
/* Return function status */
@@ -786,7 +783,7 @@
return HAL_TIMEOUT;
}
- /* Change the TIM state*/
+ /* Change the LPTIM state*/
hlptim->State = HAL_LPTIM_STATE_READY;
/* Return function status */
@@ -922,7 +919,7 @@
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
}
- /* Change the TIM state*/
+ /* Change the LPTIM state*/
hlptim->State = HAL_LPTIM_STATE_READY;
/* Return function status */
@@ -1009,7 +1006,7 @@
return HAL_TIMEOUT;
}
- /* Change the TIM state*/
+ /* Change the LPTIM state*/
hlptim->State = HAL_LPTIM_STATE_READY;
/* Return function status */
@@ -1145,7 +1142,7 @@
__HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
}
- /* Change the TIM state*/
+ /* Change the LPTIM state*/
hlptim->State = HAL_LPTIM_STATE_READY;
/* Return function status */
@@ -1584,7 +1581,8 @@
hlptim->State = HAL_LPTIM_STATE_BUSY;
/* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
- if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
+ if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM)
+ && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
{
/* Check if clock is prescaled */
assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
@@ -1665,7 +1663,8 @@
__HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT(hlptim->Instance);
/* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
- if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
+ if ((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM)
+ && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
{
/* Check if clock is prescaled */
assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
@@ -1756,8 +1755,8 @@
*/
/** @defgroup LPTIM_Exported_Functions_Group3 LPTIM Read operation functions
- * @brief Read operation functions.
- *
+ * @brief Read operation functions.
+ *
@verbatim
==============================================================================
##### LPTIM Read operation functions #####
@@ -1814,8 +1813,8 @@
*/
/** @defgroup LPTIM_Exported_Functions_Group4 LPTIM IRQ handler and callbacks
- * @brief LPTIM IRQ handler.
- *
+ * @brief LPTIM IRQ handler.
+ *
@verbatim
==============================================================================
##### LPTIM IRQ handler and callbacks #####
@@ -2205,39 +2204,48 @@
switch (CallbackID)
{
case HAL_LPTIM_MSPINIT_CB_ID :
- hlptim->MspInitCallback = HAL_LPTIM_MspInit; /* Legacy weak MspInit Callback */
+ /* Legacy weak MspInit Callback */
+ hlptim->MspInitCallback = HAL_LPTIM_MspInit;
break;
case HAL_LPTIM_MSPDEINIT_CB_ID :
- hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; /* Legacy weak Msp DeInit Callback */
+ /* Legacy weak Msp DeInit Callback */
+ hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit;
break;
case HAL_LPTIM_COMPARE_MATCH_CB_ID :
- hlptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback; /* Legacy weak Compare match Callback */
+ /* Legacy weak Compare match Callback */
+ hlptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback;
break;
case HAL_LPTIM_AUTORELOAD_MATCH_CB_ID :
- hlptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback; /* Legacy weak Auto-reload match Callback */
+ /* Legacy weak Auto-reload match Callback */
+ hlptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback;
break;
case HAL_LPTIM_TRIGGER_CB_ID :
- hlptim->TriggerCallback = HAL_LPTIM_TriggerCallback; /* Legacy weak External trigger event detection Callback */
+ /* Legacy weak External trigger event detection Callback */
+ hlptim->TriggerCallback = HAL_LPTIM_TriggerCallback;
break;
case HAL_LPTIM_COMPARE_WRITE_CB_ID :
- hlptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback; /* Legacy weak Compare register write complete Callback */
+ /* Legacy weak Compare register write complete Callback */
+ hlptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback;
break;
case HAL_LPTIM_AUTORELOAD_WRITE_CB_ID :
- hlptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback; /* Legacy weak Auto-reload register write complete Callback */
+ /* Legacy weak Auto-reload register write complete Callback */
+ hlptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback;
break;
case HAL_LPTIM_DIRECTION_UP_CB_ID :
- hlptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback; /* Legacy weak Up-counting direction change Callback */
+ /* Legacy weak Up-counting direction change Callback */
+ hlptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback;
break;
case HAL_LPTIM_DIRECTION_DOWN_CB_ID :
- hlptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback; /* Legacy weak Down-counting direction change Callback */
+ /* Legacy weak Down-counting direction change Callback */
+ hlptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback;
break;
default :
@@ -2251,11 +2259,13 @@
switch (CallbackID)
{
case HAL_LPTIM_MSPINIT_CB_ID :
- hlptim->MspInitCallback = HAL_LPTIM_MspInit; /* Legacy weak MspInit Callback */
+ /* Legacy weak MspInit Callback */
+ hlptim->MspInitCallback = HAL_LPTIM_MspInit;
break;
case HAL_LPTIM_MSPDEINIT_CB_ID :
- hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit; /* Legacy weak Msp DeInit Callback */
+ /* Legacy weak Msp DeInit Callback */
+ hlptim->MspDeInitCallback = HAL_LPTIM_MspDeInit;
break;
default :
@@ -2282,8 +2292,8 @@
*/
/** @defgroup LPTIM_Group5 Peripheral State functions
- * @brief Peripheral State functions.
- *
+ * @brief Peripheral State functions.
+ *
@verbatim
==============================================================================
##### Peripheral State functions #####
@@ -2330,13 +2340,13 @@
static void LPTIM_ResetCallback(LPTIM_HandleTypeDef *lptim)
{
/* Reset the LPTIM callback to the legacy weak callbacks */
- lptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback; /* Compare match Callback */
- lptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback; /* Auto-reload match Callback */
- lptim->TriggerCallback = HAL_LPTIM_TriggerCallback; /* External trigger event detection Callback */
- lptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback; /* Compare register write complete Callback */
- lptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback; /* Auto-reload register write complete Callback */
- lptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback; /* Up-counting direction change Callback */
- lptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback; /* Down-counting direction change Callback */
+ lptim->CompareMatchCallback = HAL_LPTIM_CompareMatchCallback;
+ lptim->AutoReloadMatchCallback = HAL_LPTIM_AutoReloadMatchCallback;
+ lptim->TriggerCallback = HAL_LPTIM_TriggerCallback;
+ lptim->CompareWriteCallback = HAL_LPTIM_CompareWriteCallback;
+ lptim->AutoReloadWriteCallback = HAL_LPTIM_AutoReloadWriteCallback;
+ lptim->DirectionUpCallback = HAL_LPTIM_DirectionUpCallback;
+ lptim->DirectionDownCallback = HAL_LPTIM_DirectionDownCallback;
}
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
@@ -2358,8 +2368,7 @@
{
result = HAL_TIMEOUT;
}
- }
- while ((!(__HAL_LPTIM_GET_FLAG((hlptim), (flag)))) && (count != 0UL));
+ } while ((!(__HAL_LPTIM_GET_FLAG((hlptim), (flag)))) && (count != 0UL));
return result;
}
diff --git a/Src/stm32g0xx_hal_pcd.c b/Src/stm32g0xx_hal_pcd.c
index b5ec4fd..7e21083 100644
--- a/Src/stm32g0xx_hal_pcd.c
+++ b/Src/stm32g0xx_hal_pcd.c
@@ -42,7 +42,7 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2020 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
@@ -200,7 +200,7 @@
hpcd->USB_Address = 0U;
hpcd->State = HAL_PCD_STATE_READY;
-
+
/* Activate LPM */
if (hpcd->Init.lpm_enable == 1U)
{
@@ -695,7 +695,8 @@
/**
* @brief Unregister the USB PCD Iso OUT incomplete Callback
- * USB PCD Iso OUT incomplete Callback is redirected to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback
+ * USB PCD Iso OUT incomplete Callback is redirected
+ * to the weak HAL_PCD_ISOOUTIncompleteCallback() predefined callback
* @param hpcd PCD handle
* @retval HAL status
*/
@@ -769,7 +770,8 @@
/**
* @brief Unregister the USB PCD Iso IN incomplete Callback
- * USB PCD Iso IN incomplete Callback is redirected to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback
+ * USB PCD Iso IN incomplete Callback is redirected
+ * to the weak HAL_PCD_ISOINIncompleteCallback() predefined callback
* @param hpcd PCD handle
* @retval HAL status
*/
@@ -1003,6 +1005,12 @@
*/
void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
{
+ /* check if this is an USB pending IT */
+ if ((SYSCFG->IT_LINE_SR[8] & (0x1U << 2)) == 0U)
+ {
+ return;
+ }
+
if (__HAL_PCD_GET_FLAG(hpcd, USB_ISTR_CTR))
{
/* servicing of the endpoint correct transfer interrupt */
@@ -1759,8 +1767,11 @@
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
}
- PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket);
- PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID);
+ if ((PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0) & USB_EP_SETUP) == 0U)
+ {
+ PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket);
+ PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID);
+ }
}
}
}
@@ -1847,9 +1858,9 @@
/* clear int flag */
PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex);
- /* Manage all non bulk transaction or Bulk Single Buffer Transaction */
- if ((ep->type != EP_TYPE_BULK) ||
- ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U)))
+ /* Manage all non bulk/isoc transaction Bulk Single Buffer Transaction */
+ if ((ep->type == EP_TYPE_INTR) || (ep->type == EP_TYPE_CTRL) ||
+ ((ep->type == EP_TYPE_BULK) && ((wEPVal & USB_EP_KIND) == 0U)))
{
/* multi-packet on the NON control IN endpoint */
TxByteNbre = (uint16_t)PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num);
@@ -1881,7 +1892,7 @@
(void)USB_EPStartXfer(hpcd->Instance, ep);
}
}
- /* bulk in double buffer enable in case of transferLen> Ep_Mps */
+ /* Double Buffer Iso/bulk IN (bulk transfer Len > Ep_Mps) */
else
{
(void)HAL_PCD_EP_DB_Transmit(hpcd, ep, wEPVal);
@@ -1927,7 +1938,7 @@
PCD_SET_EP_RX_STATUS(hpcd->Instance, ep->num, USB_EP_RX_NAK);
}
- /* Check if Buffer1 is in blocked state which requires to toggle */
+ /* Check if Buffer1 is in blocked sate which requires to toggle */
if ((wEPVal & USB_EP_DTOG_TX) != 0U)
{
PCD_FreeUserBuffer(hpcd->Instance, ep->num, 0U);
@@ -2005,6 +2016,9 @@
/* Transfer is completed */
if (ep->xfer_len == 0U)
{
+ PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U);
+ PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U);
+
/* TX COMPLETE */
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->DataInStageCallback(hpcd, ep->num);
@@ -2075,6 +2089,9 @@
/* Transfer is completed */
if (ep->xfer_len == 0U)
{
+ PCD_SET_EP_DBUF0_CNT(hpcd->Instance, ep->num, ep->is_in, 0U);
+ PCD_SET_EP_DBUF1_CNT(hpcd->Instance, ep->num, ep->is_in, 0U);
+
/* TX COMPLETE */
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
hpcd->DataInStageCallback(hpcd, ep->num);
@@ -2082,7 +2099,7 @@
HAL_PCD_DataInStageCallback(hpcd, ep->num);
#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
- /*need to Free USB Buff*/
+ /* need to Free USB Buff */
if ((wEPVal & USB_EP_DTOG_RX) == 0U)
{
PCD_FreeUserBuffer(hpcd->Instance, ep->num, 1U);
diff --git a/Src/stm32g0xx_hal_pcd_ex.c b/Src/stm32g0xx_hal_pcd_ex.c
index 828a617..c88c44e 100644
--- a/Src/stm32g0xx_hal_pcd_ex.c
+++ b/Src/stm32g0xx_hal_pcd_ex.c
@@ -10,7 +10,7 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2020 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
diff --git a/Src/stm32g0xx_hal_pwr.c b/Src/stm32g0xx_hal_pwr.c
index 702bb27..1c9a956 100644
--- a/Src/stm32g0xx_hal_pwr.c
+++ b/Src/stm32g0xx_hal_pwr.c
@@ -11,11 +11,11 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2018 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
+ * the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
@@ -246,7 +246,7 @@
* @param WakeUpPinPolarity Specifies which Wake-Up pin to enable.
* This parameter can be one of the following legacy values which set
* the default polarity i.e. detection on high level (rising edge):
- * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3(*),
+ * @arg @ref PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3(*),
* PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5(*),PWR_WAKEUP_PIN6
* or one of the following value where the user can explicitly specify
* the enabled pin and the chosen polarity:
@@ -323,11 +323,11 @@
assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
/* Set Regulator parameter */
- if(Regulator != PWR_MAINREGULATOR_ON)
+ if (Regulator != PWR_MAINREGULATOR_ON)
{
/* If in run mode, first move to low-power run mode.
The system clock frequency must be below 2 MHz at this point. */
- if((PWR->SR2 & PWR_SR2_REGLPF) == 0x00u)
+ if ((PWR->SR2 & PWR_SR2_REGLPF) == 0x00u)
{
HAL_PWREx_EnableLowPowerRunMode();
}
@@ -335,7 +335,7 @@
else
{
/* If in low-power run mode at this point, exit it */
- if((PWR->SR2 & PWR_SR2_REGLPF) != 0x00u)
+ if ((PWR->SR2 & PWR_SR2_REGLPF) != 0x00u)
{
if (HAL_PWREx_DisableLowPowerRunMode() != HAL_OK)
{
@@ -348,7 +348,7 @@
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
/* Select SLEEP mode entry -------------------------------------------------*/
- if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+ if (SLEEPEntry == PWR_SLEEPENTRY_WFI)
{
/* Request Wait For Interrupt */
__WFI();
@@ -417,7 +417,7 @@
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
/* Select Stop mode entry --------------------------------------------------*/
- if(STOPEntry == PWR_STOPENTRY_WFI)
+ if (STOPEntry == PWR_STOPENTRY_WFI)
{
/* Request Wait For Interrupt */
__WFI();
@@ -459,10 +459,10 @@
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
-/* This option is used to ensure that store operations are completed */
+ /* This option is used to ensure that store operations are completed */
#if defined ( __CC_ARM)
__force_stores();
-#endif
+#endif /* __CC_ARM */
/* Request Wait For Interrupt */
__WFI();
diff --git a/Src/stm32g0xx_hal_pwr_ex.c b/Src/stm32g0xx_hal_pwr_ex.c
index 8443941..2fae93f 100644
--- a/Src/stm32g0xx_hal_pwr_ex.c
+++ b/Src/stm32g0xx_hal_pwr_ex.c
@@ -11,11 +11,11 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2018 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
+ * the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
@@ -56,7 +56,7 @@
/**
* @}
*/
-#endif
+#endif /* PWR_PVD_SUPPORT */
/** @defgroup PWREx_TimeOut_Value PWREx Flag Setting Time Out Value
* @{
@@ -171,7 +171,7 @@
{
PWR->CR3 &= ~PWR_CR3_ENB_ULP;
}
-#endif
+#endif /* PWR_CR3_ENB_ULP */
#if defined(PWR_PVD_SUPPORT)
/**
@@ -201,24 +201,24 @@
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
/* Configure interrupt mode */
- if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+ if ((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
{
__HAL_PWR_PVD_EXTI_ENABLE_IT();
}
/* Configure event mode */
- if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+ if ((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
{
__HAL_PWR_PVD_EXTI_ENABLE_EVENT();
}
/* Configure the edge */
- if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+ if ((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
{
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
}
- if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+ if ((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
{
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
}
@@ -245,7 +245,7 @@
{
CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE);
}
-#endif
+#endif /* PWR_PVD_SUPPORT */
#if defined(PWR_PVM_SUPPORT)
/**
@@ -266,7 +266,7 @@
{
CLEAR_BIT(PWR->CR2, PWR_CR2_USV);
}
-#endif
+#endif /* PWR_PVM_SUPPORT */
#if defined(PWR_CR2_IOSV)
/**
@@ -308,7 +308,7 @@
{
CLEAR_BIT(PWR->CR2, PWR_PVM_USB);
}
-#endif
+#endif /* PWR_PVM_SUPPORT */
#if defined(PWR_PVM_SUPPORT)
/**
@@ -344,24 +344,24 @@
__HAL_PWR_PVM_EXTI_DISABLE_RISING_EDGE();
/* Configure interrupt mode */
- if((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT)
+ if ((sConfigPVM->Mode & PVM_MODE_IT) == PVM_MODE_IT)
{
__HAL_PWR_PVM_EXTI_ENABLE_IT();
}
/* Configure event mode */
- if((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT)
+ if ((sConfigPVM->Mode & PVM_MODE_EVT) == PVM_MODE_EVT)
{
__HAL_PWR_PVM_EXTI_ENABLE_EVENT();
}
/* Configure the edge */
- if((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE)
+ if ((sConfigPVM->Mode & PVM_RISING_EDGE) == PVM_RISING_EDGE)
{
__HAL_PWR_PVM_EXTI_ENABLE_RISING_EDGE();
}
- if((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE)
+ if ((sConfigPVM->Mode & PVM_FALLING_EDGE) == PVM_FALLING_EDGE)
{
__HAL_PWR_PVM_EXTI_ENABLE_FALLING_EDGE();
}
@@ -374,7 +374,7 @@
return status;
}
-#endif
+#endif /* PWR_PVM_SUPPORT */
/**
* @brief Enable Internal Wake-up Line.
* @retval None
@@ -422,35 +422,35 @@
switch (GPIO)
{
case PWR_GPIO_A:
- SET_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14));
- CLEAR_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13));
- break;
+ SET_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14));
+ CLEAR_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13));
+ break;
case PWR_GPIO_B:
- SET_BIT(PWR->PUCRB, GPIONumber);
- CLEAR_BIT(PWR->PDCRB, GPIONumber);
- break;
+ SET_BIT(PWR->PUCRB, GPIONumber);
+ CLEAR_BIT(PWR->PDCRB, GPIONumber);
+ break;
case PWR_GPIO_C:
- SET_BIT(PWR->PUCRC, GPIONumber);
- CLEAR_BIT(PWR->PDCRC, GPIONumber);
- break;
+ SET_BIT(PWR->PUCRC, GPIONumber);
+ CLEAR_BIT(PWR->PDCRC, GPIONumber);
+ break;
case PWR_GPIO_D:
- SET_BIT(PWR->PUCRD, GPIONumber);
- CLEAR_BIT(PWR->PDCRD, GPIONumber);
- break;
+ SET_BIT(PWR->PUCRD, GPIONumber);
+ CLEAR_BIT(PWR->PDCRD, GPIONumber);
+ break;
#if defined(GPI0E)
case PWR_GPIO_E:
- SET_BIT(PWR->PUCRE, GPIONumber);
- CLEAR_BIT(PWR->PDCRE, GPIONumber);
- break;
-#endif
+ SET_BIT(PWR->PUCRE, GPIONumber);
+ CLEAR_BIT(PWR->PDCRE, GPIONumber);
+ break;
+#endif /* GPI0E */
case PWR_GPIO_F:
- SET_BIT(PWR->PUCRF, GPIONumber);
- CLEAR_BIT(PWR->PDCRF, GPIONumber);
- break;
+ SET_BIT(PWR->PUCRF, GPIONumber);
+ CLEAR_BIT(PWR->PDCRF, GPIONumber);
+ break;
default:
status = HAL_ERROR;
@@ -503,14 +503,14 @@
case PWR_GPIO_E:
CLEAR_BIT(PWR->PUCRE, GPIONumber);
break;
-#endif
+#endif /* GPI0E */
case PWR_GPIO_F:
CLEAR_BIT(PWR->PUCRF, GPIONumber);
break;
default:
- status = HAL_ERROR;
- break;
+ status = HAL_ERROR;
+ break;
}
return status;
@@ -546,35 +546,35 @@
switch (GPIO)
{
case PWR_GPIO_A:
- SET_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13));
- CLEAR_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14));
- break;
+ SET_BIT(PWR->PDCRA, (GPIONumber & ~PWR_GPIO_BIT_13));
+ CLEAR_BIT(PWR->PUCRA, (GPIONumber & ~PWR_GPIO_BIT_14));
+ break;
case PWR_GPIO_B:
- SET_BIT(PWR->PDCRB, GPIONumber);
- CLEAR_BIT(PWR->PUCRB, GPIONumber);
- break;
+ SET_BIT(PWR->PDCRB, GPIONumber);
+ CLEAR_BIT(PWR->PUCRB, GPIONumber);
+ break;
case PWR_GPIO_C:
- SET_BIT(PWR->PDCRC, GPIONumber);
- CLEAR_BIT(PWR->PUCRC, GPIONumber);
- break;
+ SET_BIT(PWR->PDCRC, GPIONumber);
+ CLEAR_BIT(PWR->PUCRC, GPIONumber);
+ break;
case PWR_GPIO_D:
- SET_BIT(PWR->PDCRD, GPIONumber);
- CLEAR_BIT(PWR->PUCRD, GPIONumber);
- break;
+ SET_BIT(PWR->PDCRD, GPIONumber);
+ CLEAR_BIT(PWR->PUCRD, GPIONumber);
+ break;
#if defined(GPIOE)
case PWR_GPIO_E:
- SET_BIT(PWR->PDCRE, GPIONumber);
- CLEAR_BIT(PWR->PUCRE, GPIONumber);
- break;
-#endif
+ SET_BIT(PWR->PDCRE, GPIONumber);
+ CLEAR_BIT(PWR->PUCRE, GPIONumber);
+ break;
+#endif /* GPI0E */
case PWR_GPIO_F:
- SET_BIT(PWR->PDCRF, GPIONumber);
- CLEAR_BIT(PWR->PUCRF, GPIONumber);
- break;
+ SET_BIT(PWR->PDCRF, GPIONumber);
+ CLEAR_BIT(PWR->PUCRF, GPIONumber);
+ break;
default:
status = HAL_ERROR;
@@ -627,7 +627,7 @@
case PWR_GPIO_E:
CLEAR_BIT(PWR->PDCRE, GPIONumber);
break;
-#endif
+#endif /* GPI0E */
case PWR_GPIO_F:
CLEAR_BIT(PWR->PDCRF, GPIONumber);
break;
@@ -690,7 +690,7 @@
{
CLEAR_BIT(PWR->CR3, PWR_CR3_RRS);
}
-#endif
+#endif /* PWR_CR3_RRS */
/**
* @brief Enable Flash Power Down.
@@ -770,15 +770,15 @@
MODIFY_REG(PWR->CR1, PWR_CR1_VOS, VoltageScaling);
/* In case of Range 1 selected, we need to ensure that main regulator reaches new value */
- if(VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1)
+ if (VoltageScaling == PWR_REGULATOR_VOLTAGE_SCALE1)
{
/* Set timeout value */
- wait_loop_index = ((PWR_VOSF_SETTING_DELAY_6_US * SystemCoreClock ) / 1000000U) + 1U;
+ wait_loop_index = ((PWR_VOSF_SETTING_DELAY_6_US * SystemCoreClock) / 1000000U) + 1U;
/* Wait until VOSF is reset */
- while(HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF))
+ while (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_VOSF))
{
- if(wait_loop_index != 0U)
+ if (wait_loop_index != 0U)
{
wait_loop_index--;
}
@@ -818,15 +818,15 @@
*/
HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void)
{
- uint32_t wait_loop_index = ((PWR_REGLPF_SETTING_DELAY_6_US * SystemCoreClock ) / 1000000U) + 1U;
+ uint32_t wait_loop_index = ((PWR_REGLPF_SETTING_DELAY_6_US * SystemCoreClock) / 1000000U) + 1U;
/* Clear LPR bit */
CLEAR_BIT(PWR->CR1, PWR_CR1_LPR);
/* Wait until REGLPF is reset */
- while(HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF))
+ while (HAL_IS_BIT_SET(PWR->SR2, PWR_SR2_REGLPF))
{
- if(wait_loop_index != 0U)
+ if (wait_loop_index != 0U)
{
wait_loop_index--;
}
@@ -869,12 +869,12 @@
/* This option is used to ensure that store operations are completed */
#if defined ( __CC_ARM)
__force_stores();
-#endif
+#endif /* __CC_ARM */
/* Request Wait For Interrupt */
__WFI();
}
-#endif
+#endif /* PWR_SHDW_SUPPORT */
#if defined(PWR_PVD_SUPPORT) && defined(PWR_PVM_SUPPORT)
/**
@@ -885,7 +885,7 @@
void HAL_PWREx_PVD_PVM_IRQHandler(void)
{
/* Check PWR PVD exti Rising flag */
- if(__HAL_PWR_PVD_EXTI_GET_RISING_FLAG() != 0x0U)
+ if (__HAL_PWR_PVD_EXTI_GET_RISING_FLAG() != 0x0U)
{
/* Clear PVD exti pending bit */
__HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG();
@@ -895,7 +895,7 @@
}
/* Check PWR exti fallling flag */
- if(__HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() != 0x0U)
+ if (__HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() != 0x0U)
{
/* Clear PVD exti pending bit */
__HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG();
@@ -903,9 +903,9 @@
/* PWR PVD interrupt falling user callback */
HAL_PWREx_PVD_PVM_Falling_Callback();
}
-
+
/* Check PWR PVM exti Rising flag */
- if(__HAL_PWR_PVM_EXTI_GET_RISING_FLAG() != 0x0U)
+ if (__HAL_PWR_PVM_EXTI_GET_RISING_FLAG() != 0x0U)
{
/* Clear PVM exti pending bit */
__HAL_PWR_PVM_EXTI_CLEAR_RISING_FLAG();
@@ -915,7 +915,7 @@
}
/* Check PWR PVM exti fallling flag */
- if(__HAL_PWR_PVM_EXTI_GET_FALLING_FLAG() != 0x0U)
+ if (__HAL_PWR_PVM_EXTI_GET_FALLING_FLAG() != 0x0U)
{
/* Clear PVM exti pending bit */
__HAL_PWR_PVM_EXTI_CLEAR_FALLING_FLAG();
@@ -955,7 +955,7 @@
void HAL_PWREx_PVD_IRQHandler(void)
{
/* Check PWR exti Rising flag */
- if(__HAL_PWR_PVD_EXTI_GET_RISING_FLAG() != 0x0U)
+ if (__HAL_PWR_PVD_EXTI_GET_RISING_FLAG() != 0x0U)
{
/* Clear PVD exti pending bit */
__HAL_PWR_PVD_EXTI_CLEAR_RISING_FLAG();
@@ -965,7 +965,7 @@
}
/* Check PWR exti fallling flag */
- if(__HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() != 0x0U)
+ if (__HAL_PWR_PVD_EXTI_GET_FALLING_FLAG() != 0x0U)
{
/* Clear PVD exti pending bit */
__HAL_PWR_PVD_EXTI_CLEAR_FALLING_FLAG();
@@ -997,7 +997,7 @@
*/
}
-#endif
+#endif /* PWR_PVD_SUPPORT && PWR_PVM_SUPPORT */
/**
* @}
diff --git a/Src/stm32g0xx_hal_rcc.c b/Src/stm32g0xx_hal_rcc.c
index 8efc348..2f8d0f7 100644
--- a/Src/stm32g0xx_hal_rcc.c
+++ b/Src/stm32g0xx_hal_rcc.c
@@ -98,7 +98,7 @@
#endif /* RCC_MCO2_SUPPORT */
#define RCC_PLL_OSCSOURCE_CONFIG(__HAL_RCC_PLLSOURCE__) \
- (MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (uint32_t)(__HAL_RCC_PLLSOURCE__)))
+ (MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (uint32_t)(__HAL_RCC_PLLSOURCE__)))
/**
* @}
*/
@@ -334,7 +334,8 @@
temp_pllckcfg = __HAL_RCC_GET_PLL_OSCSOURCE();
/* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */
- if (((temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (temp_pllckcfg == RCC_PLLSOURCE_HSE)) || (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSE))
+ if (((temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (temp_pllckcfg == RCC_PLLSOURCE_HSE))
+ || (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSE))
{
if ((READ_BIT(RCC->CR, RCC_CR_HSERDY) != 0U) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
{
@@ -388,7 +389,8 @@
/* Check if HSI16 is used as system clock or as PLL source when PLL is selected as system clock */
temp_sysclksrc = __HAL_RCC_GET_SYSCLK_SOURCE();
temp_pllckcfg = __HAL_RCC_GET_PLL_OSCSOURCE();
- if (((temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (temp_pllckcfg == RCC_PLLSOURCE_HSI)) || (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSI))
+ if (((temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (temp_pllckcfg == RCC_PLLSOURCE_HSI))
+ || (temp_sysclksrc == RCC_SYSCLKSOURCE_STATUS_HSI))
{
/* When HSI is used as system clock or as PLL input clock it can not be disabled */
if ((READ_BIT(RCC->CR, RCC_CR_HSIRDY) != 0U) && (RCC_OscInitStruct->HSIState == RCC_HSI_OFF))
@@ -991,7 +993,7 @@
* @arg @ref RCC_MCO1SOURCE_PLLPCLK PLLP clock selected as MCO1 source(*)
* @arg @ref RCC_MCO1SOURCE_PLLQCLK PLLQ clock selected as MCO1 source(*)
* @arg @ref RCC_MCO1SOURCE_RTCCLK RTC clock selected as MCO1 source(*)
- * @arg @ref RCC_MCO1SOURCE_RTC_WKUP RTC_Wakeup selected as MCO1 source(*)
+ * @arg @ref RCC_MCO1SOURCE_RTC_WKUP RTC_Wakeup selected as MCO1 source(*)
* @arg @ref RCC_MCO2SOURCE_NOCLOCK MCO2 output disabled, no clock on MCO2(*)
* @arg @ref RCC_MCO2SOURCE_SYSCLK system clock selected as MCO2 source(*)
* @arg @ref RCC_MCO2SOURCE_HSI48 HSI48 clock selected as MCO2 source for devices with HSI48(*)
@@ -1236,9 +1238,8 @@
{
RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
}
-
RCC_OscInitStruct->HSICalibrationValue = ((RCC->ICSCR & RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos);
- RCC_OscInitStruct->HSIDiv = ((RCC->CR & RCC_CR_HSIDIV) >> RCC_CR_HSIDIV_Pos);
+ RCC_OscInitStruct->HSIDiv = (RCC->CR & RCC_CR_HSIDIV);
/* Get the LSE configuration -----------------------------------------------*/
if ((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
@@ -1418,6 +1419,25 @@
}
/**
+ * @brief Get and clear reset flags
+ * @note Once reset flags are retrieved, this API is clearing them in order
+ * to isolate next reset reason.
+ * @retval can be a combination of @ref RCC_Reset_Flag
+ */
+uint32_t HAL_RCC_GetResetSource(void)
+{
+ uint32_t reset;
+
+ /* Get all reset flags */
+ reset = RCC->CSR & RCC_RESET_FLAG_ALL;
+
+ /* Clear Reset flags */
+ RCC->CSR |= RCC_CSR_RMVF;
+
+ return reset;
+}
+
+/**
* @}
*/
diff --git a/Src/stm32g0xx_hal_rcc_ex.c b/Src/stm32g0xx_hal_rcc_ex.c
index aa2d968..fb65ec4 100644
--- a/Src/stm32g0xx_hal_rcc_ex.c
+++ b/Src/stm32g0xx_hal_rcc_ex.c
@@ -419,7 +419,7 @@
}
#endif /* RCC_CCIPR2_I2S2SEL */
-#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
+#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
/*-------------------------- USB clock source configuration ---------------------*/
if (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)
{
@@ -1528,8 +1528,7 @@
/* frequency error counter reached a zero value */
__HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC);
}
- }
- while (RCC_CRS_NONE == crsstatus);
+ } while (RCC_CRS_NONE == crsstatus);
return crsstatus;
}
diff --git a/Src/stm32g0xx_hal_rng.c b/Src/stm32g0xx_hal_rng.c
index 481824c..734fe8c 100644
--- a/Src/stm32g0xx_hal_rng.c
+++ b/Src/stm32g0xx_hal_rng.c
@@ -129,8 +129,8 @@
*/
/** @addtogroup RNG_Exported_Functions_Group1
- * @brief Initialization and configuration functions
- *
+ * @brief Initialization and configuration functions
+ *
@verbatim
===============================================================================
##### Initialization and configuration functions #####
@@ -301,7 +301,8 @@
* @param pCallback pointer to the Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID, pRNG_CallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_RNG_RegisterCallback(RNG_HandleTypeDef *hrng, HAL_RNG_CallbackIDTypeDef CallbackID,
+ pRNG_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -318,44 +319,44 @@
{
switch (CallbackID)
{
- case HAL_RNG_ERROR_CB_ID :
- hrng->ErrorCallback = pCallback;
- break;
+ case HAL_RNG_ERROR_CB_ID :
+ hrng->ErrorCallback = pCallback;
+ break;
- case HAL_RNG_MSPINIT_CB_ID :
- hrng->MspInitCallback = pCallback;
- break;
+ case HAL_RNG_MSPINIT_CB_ID :
+ hrng->MspInitCallback = pCallback;
+ break;
- case HAL_RNG_MSPDEINIT_CB_ID :
- hrng->MspDeInitCallback = pCallback;
- break;
+ case HAL_RNG_MSPDEINIT_CB_ID :
+ hrng->MspDeInitCallback = pCallback;
+ break;
- default :
- /* Update the error code */
- hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
+ default :
+ /* Update the error code */
+ hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
}
}
else if (HAL_RNG_STATE_RESET == hrng->State)
{
switch (CallbackID)
{
- case HAL_RNG_MSPINIT_CB_ID :
- hrng->MspInitCallback = pCallback;
- break;
+ case HAL_RNG_MSPINIT_CB_ID :
+ hrng->MspInitCallback = pCallback;
+ break;
- case HAL_RNG_MSPDEINIT_CB_ID :
- hrng->MspDeInitCallback = pCallback;
- break;
+ case HAL_RNG_MSPDEINIT_CB_ID :
+ hrng->MspDeInitCallback = pCallback;
+ break;
- default :
- /* Update the error code */
- hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
+ default :
+ /* Update the error code */
+ hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
}
}
else
@@ -393,44 +394,44 @@
{
switch (CallbackID)
{
- case HAL_RNG_ERROR_CB_ID :
- hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */
- break;
+ case HAL_RNG_ERROR_CB_ID :
+ hrng->ErrorCallback = HAL_RNG_ErrorCallback; /* Legacy weak ErrorCallback */
+ break;
- case HAL_RNG_MSPINIT_CB_ID :
- hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */
- break;
+ case HAL_RNG_MSPINIT_CB_ID :
+ hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */
+ break;
- case HAL_RNG_MSPDEINIT_CB_ID :
- hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */
- break;
+ case HAL_RNG_MSPDEINIT_CB_ID :
+ hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspDeInit */
+ break;
- default :
- /* Update the error code */
- hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
+ default :
+ /* Update the error code */
+ hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
}
}
else if (HAL_RNG_STATE_RESET == hrng->State)
{
switch (CallbackID)
{
- case HAL_RNG_MSPINIT_CB_ID :
- hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */
- break;
+ case HAL_RNG_MSPINIT_CB_ID :
+ hrng->MspInitCallback = HAL_RNG_MspInit; /* Legacy weak MspInit */
+ break;
- case HAL_RNG_MSPDEINIT_CB_ID :
- hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspInit */
- break;
+ case HAL_RNG_MSPDEINIT_CB_ID :
+ hrng->MspDeInitCallback = HAL_RNG_MspDeInit; /* Legacy weak MspInit */
+ break;
- default :
- /* Update the error code */
- hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
- /* Return error status */
- status = HAL_ERROR;
- break;
+ default :
+ /* Update the error code */
+ hrng->ErrorCode = HAL_RNG_ERROR_INVALID_CALLBACK;
+ /* Return error status */
+ status = HAL_ERROR;
+ break;
}
}
else
@@ -520,8 +521,8 @@
*/
/** @addtogroup RNG_Exported_Functions_Group2
- * @brief Peripheral Control functions
- *
+ * @brief Peripheral Control functions
+ *
@verbatim
===============================================================================
##### Peripheral Control functions #####
@@ -538,11 +539,11 @@
/**
* @brief Generates a 32-bit random number.
* @note This function checks value of RNG_FLAG_DRDY flag to know if valid
- * random number is available in the DR register (RNG_FLAG_DRDY flag set
+ * random number is available in the DR register (RNG_FLAG_DRDY flag set
* whenever a random number is available through the RNG_DR register).
- * After transitioning from 0 to 1 (random number available),
- * RNG_FLAG_DRDY flag remains high until output buffer becomes empty after reading
- * four words from the RNG_DR register, i.e. further function calls
+ * After transitioning from 0 to 1 (random number available),
+ * RNG_FLAG_DRDY flag remains high until output buffer becomes empty after reading
+ * four words from the RNG_DR register, i.e. further function calls
* will immediately return a new u32 random number (additional words are
* available and can be read by the application, till RNG_FLAG_DRDY flag remains high).
* @note When no more random number data is available in DR register, RNG_FLAG_DRDY
@@ -575,11 +576,15 @@
{
if ((HAL_GetTick() - tickstart) > RNG_TIMEOUT_VALUE)
{
- hrng->State = HAL_RNG_STATE_READY;
- hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT;
- /* Process Unlocked */
- __HAL_UNLOCK(hrng);
- return HAL_ERROR;
+ /* New check to avoid false timeout detection in case of preemption */
+ if (__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET)
+ {
+ hrng->State = HAL_RNG_STATE_READY;
+ hrng->ErrorCode = HAL_RNG_ERROR_TIMEOUT;
+ /* Process Unlocked */
+ __HAL_UNLOCK(hrng);
+ return HAL_ERROR;
+ }
}
}
@@ -693,6 +698,8 @@
/* Clear the clock error flag */
__HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI | RNG_IT_SEI);
+
+ return;
}
/* Check RNG data ready interrupt occurred */
@@ -738,7 +745,7 @@
* @note When RNG_FLAG_DRDY flag value is set, first random number has been read
* from DR register in IRQ Handler and is provided as callback parameter.
* Depending on valid data available in the conditioning output buffer,
- * additional words can be read by the application from DR register till
+ * additional words can be read by the application from DR register till
* DRDY bit remains high.
* @param hrng pointer to a RNG_HandleTypeDef structure that contains
* the configuration information for RNG.
@@ -775,8 +782,8 @@
/** @addtogroup RNG_Exported_Functions_Group3
- * @brief Peripheral State functions
- *
+ * @brief Peripheral State functions
+ *
@verbatim
===============================================================================
##### Peripheral State functions #####
@@ -804,7 +811,7 @@
* @brief Return the RNG handle error code.
* @param hrng: pointer to a RNG_HandleTypeDef structure.
* @retval RNG Error Code
-*/
+ */
uint32_t HAL_RNG_GetError(RNG_HandleTypeDef *hrng)
{
/* Return RNG Error Code */
diff --git a/Src/stm32g0xx_hal_rtc.c b/Src/stm32g0xx_hal_rtc.c
index 4dae3fb..e222b6e 100644
--- a/Src/stm32g0xx_hal_rtc.c
+++ b/Src/stm32g0xx_hal_rtc.c
@@ -274,7 +274,7 @@
hrtc->Tamper2EventCallback = HAL_RTCEx_Tamper2EventCallback; /* Legacy weak Tamper2EventCallback */
#if defined(TAMP_CR1_TAMP3E)
hrtc->Tamper3EventCallback = HAL_RTCEx_Tamper3EventCallback; /* Legacy weak Tamper3EventCallback */
-#endif
+#endif /* TAMP_CR1_TAMP3E */
hrtc->InternalTamper3EventCallback = HAL_RTCEx_InternalTamper3EventCallback; /*!< Legacy weak InternalTamper3EventCallback */
hrtc->InternalTamper4EventCallback = HAL_RTCEx_InternalTamper4EventCallback; /*!< Legacy weak InternalTamper4EventCallback */
hrtc->InternalTamper5EventCallback = HAL_RTCEx_InternalTamper5EventCallback; /*!< Legacy weak InternalTamper5EventCallback */
@@ -494,7 +494,7 @@
case HAL_RTC_TAMPER3_EVENT_CB_ID :
hrtc->Tamper3EventCallback = pCallback;
break;
-#endif
+#endif /* TAMP_CR1_TAMP3E */
case HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID :
hrtc->InternalTamper3EventCallback = pCallback;
@@ -616,7 +616,7 @@
case HAL_RTC_TAMPER3_EVENT_CB_ID :
hrtc->Tamper3EventCallback = HAL_RTCEx_Tamper3EventCallback; /* Legacy weak Tamper3EventCallback */
break;
-#endif
+#endif /* TAMP_CR1_TAMP3E */
case HAL_RTC_INTERNAL_TAMPER3_EVENT_CB_ID :
hrtc->InternalTamper3EventCallback = HAL_RTCEx_InternalTamper3EventCallback; /* Legacy weak InternalTamper3EventCallback */
@@ -803,10 +803,10 @@
/* Set the RTC_TR register */
hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK);
- /* Clear the bits to be configured */
+ /* This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
hrtc->Instance->CR &= ((uint32_t)~RTC_CR_BKP);
- /* Configure the RTC_CR register */
+ /* This interface is deprecated. To manage Daylight Saving Time, please use HAL_RTC_DST_xxx functions */
hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation);
/* Exit Initialization mode */
@@ -1834,6 +1834,67 @@
}
/**
+ * @brief Daylight Saving Time, Add one hour to the calendar in one single operation
+ * without going through the initialization procedure.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_Add1Hour(RTC_HandleTypeDef *hrtc)
+{
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ SET_BIT(hrtc->Instance->CR, RTC_CR_ADD1H);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Subtract one hour from the calendar in one
+ * single operation without going through the initialization procedure.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_Sub1Hour(RTC_HandleTypeDef *hrtc)
+{
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ SET_BIT(hrtc->Instance->CR, RTC_CR_SUB1H);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Set the store operation bit.
+ * @note It can be used by the software in order to memorize the DST status.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_SetStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ SET_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Clear the store operation bit.
+ * @param hrtc RTC handle
+ * @retval None
+ */
+void HAL_RTC_DST_ClearStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+ CLEAR_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+}
+
+/**
+ * @brief Daylight Saving Time, Read the store operation bit.
+ * @param hrtc RTC handle
+ * @retval operation see RTC_StoreOperation_Definitions
+ */
+uint32_t HAL_RTC_DST_ReadStoreOperation(RTC_HandleTypeDef *hrtc)
+{
+ return READ_BIT(hrtc->Instance->CR, RTC_CR_BKP);
+}
+
+/**
* @}
*/
diff --git a/Src/stm32g0xx_hal_rtc_ex.c b/Src/stm32g0xx_hal_rtc_ex.c
index ccf1ff4..55dacc3 100644
--- a/Src/stm32g0xx_hal_rtc_ex.c
+++ b/Src/stm32g0xx_hal_rtc_ex.c
@@ -251,12 +251,12 @@
/* Enable IT timestamp */
__HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS);
- /* RTC timestamp Interrupt Configuration: EXTI configuration */
- __HAL_RTC_TIMESTAMP_EXTI_ENABLE_IT();
-
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+ /* RTC timestamp Interrupt Configuration: EXTI configuration */
+ __HAL_RTC_TIMESTAMP_EXTI_ENABLE_IT();
+
hrtc->State = HAL_RTC_STATE_READY;
/* Process Unlocked */
@@ -1712,7 +1712,7 @@
HAL_RTCEx_Tamper3EventCallback(hrtc);
#endif /* USE_HAL_RTC_REGISTER_CALLBACKS */
}
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/* Check Internal Tamper3 status */
if((tmp & RTC_INT_TAMPER_3) == RTC_INT_TAMPER_3)
@@ -1811,7 +1811,7 @@
the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file
*/
}
-#endif
+#endif /* TAMP_CR1_TAMP3E */
/**
* @brief Internal Tamper 3 callback.
diff --git a/Src/stm32g0xx_hal_smartcard.c b/Src/stm32g0xx_hal_smartcard.c
index 763b9ea..c437c5b 100644
--- a/Src/stm32g0xx_hal_smartcard.c
+++ b/Src/stm32g0xx_hal_smartcard.c
@@ -35,7 +35,8 @@
(+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
(+++) Configure the DMA Tx/Rx channel.
(+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.
+ (+++) Configure the priority and enable the NVIC for the transfer complete
+ interrupt on the DMA Tx/Rx channel.
(#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly,
the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission
@@ -107,8 +108,8 @@
allows the user to configure dynamically the driver callbacks.
[..]
- Use Function @ref HAL_SMARTCARD_RegisterCallback() to register a user callback.
- Function @ref HAL_SMARTCARD_RegisterCallback() allows to register following callbacks:
+ Use Function HAL_SMARTCARD_RegisterCallback() to register a user callback.
+ Function HAL_SMARTCARD_RegisterCallback() allows to register following callbacks:
(+) TxCpltCallback : Tx Complete Callback.
(+) RxCpltCallback : Rx Complete Callback.
(+) ErrorCallback : Error Callback.
@@ -123,9 +124,9 @@
and a pointer to the user callback function.
[..]
- Use function @ref HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default
+ Use function HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default
weak (surcharged) function.
- @ref HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle,
+ HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle,
and the Callback ID.
This function allows to reset following callbacks:
(+) TxCpltCallback : Tx Complete Callback.
@@ -140,13 +141,13 @@
(+) MspDeInitCallback : SMARTCARD MspDeInit.
[..]
- By default, after the @ref HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET
+ By default, after the HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET
all callbacks are set to the corresponding weak (surcharged) functions:
- examples @ref HAL_SMARTCARD_TxCpltCallback(), @ref HAL_SMARTCARD_RxCpltCallback().
+ examples HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback().
Exception done for MspInit and MspDeInit functions that are respectively
- reset to the legacy weak (surcharged) functions in the @ref HAL_SMARTCARD_Init()
- and @ref HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand).
- If not, MspInit or MspDeInit are not null, the @ref HAL_SMARTCARD_Init() and @ref HAL_SMARTCARD_DeInit()
+ reset to the legacy weak (surcharged) functions in the HAL_SMARTCARD_Init()
+ and HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand).
+ If not, MspInit or MspDeInit are not null, the HAL_SMARTCARD_Init() and HAL_SMARTCARD_DeInit()
keep and use the user MspInit/MspDeInit callbacks (registered beforehand).
[..]
@@ -155,8 +156,8 @@
in HAL_SMARTCARD_STATE_READY or HAL_SMARTCARD_STATE_RESET state, thus registered (user)
MspInit/DeInit callbacks can be used during the Init/DeInit.
In that case first register the MspInit/MspDeInit user callbacks
- using @ref HAL_SMARTCARD_RegisterCallback() before calling @ref HAL_SMARTCARD_DeInit()
- or @ref HAL_SMARTCARD_Init() function.
+ using HAL_SMARTCARD_RegisterCallback() before calling HAL_SMARTCARD_DeInit()
+ or HAL_SMARTCARD_Init() function.
[..]
When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or
@@ -198,23 +199,24 @@
/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
* @{
*/
-#define SMARTCARD_TEACK_REACK_TIMEOUT 1000U /*!< SMARTCARD TX or RX enable acknowledge time-out value */
+#define SMARTCARD_TEACK_REACK_TIMEOUT 1000U /*!< SMARTCARD TX or RX enable acknowledge time-out value */
-#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
- USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8| \
- USART_CR1_FIFOEN )) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */
+#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
+ USART_CR1_RE | USART_CR1_OVER8| \
+ USART_CR1_FIFOEN)) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */
-#define USART_CR2_CLK_FIELDS ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | USART_CR2_CPHA | \
- USART_CR2_LBCL)) /*!< SMARTCARD clock-related USART CR2 fields of parameters */
+#define USART_CR2_CLK_FIELDS ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \
+ USART_CR2_CPHA | USART_CR2_LBCL)) /*!< SMARTCARD clock-related USART CR2 fields of parameters */
-#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_RTOEN | USART_CR2_CLK_FIELDS | USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by SMARTCARD_SetConfig API */
+#define USART_CR2_FIELDS ((uint32_t)(USART_CR2_RTOEN | USART_CR2_CLK_FIELDS | \
+ USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by SMARTCARD_SetConfig API */
-#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_ONEBIT | USART_CR3_NACK | USART_CR3_SCARCNT | \
- USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< USART CR3 fields of parameters set by SMARTCARD_SetConfig API */
+#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_ONEBIT | USART_CR3_NACK | USART_CR3_SCARCNT | \
+ USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< USART CR3 fields of parameters set by SMARTCARD_SetConfig API */
-#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */
+#define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */
-#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */
+#define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */
/**
* @}
*/
@@ -483,7 +485,8 @@
* @retval HAL status
*/
HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard,
- HAL_SMARTCARD_CallbackIDTypeDef CallbackID, pSMARTCARD_CallbackTypeDef pCallback)
+ HAL_SMARTCARD_CallbackIDTypeDef CallbackID,
+ pSMARTCARD_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -618,43 +621,45 @@
switch (CallbackID)
{
case HAL_SMARTCARD_TX_COMPLETE_CB_ID :
- hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */
+ hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */
break;
case HAL_SMARTCARD_RX_COMPLETE_CB_ID :
- hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */
+ hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */
break;
case HAL_SMARTCARD_ERROR_CB_ID :
- hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */
+ hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */
break;
case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID :
- hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
+ hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
break;
case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID :
- hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */
+ hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak
+ AbortTransmitCpltCallback*/
break;
case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID :
- hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */
+ hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak
+ AbortReceiveCpltCallback */
break;
case HAL_SMARTCARD_RX_FIFO_FULL_CB_ID :
- hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */
+ hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */
break;
case HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID :
- hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */
+ hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */
break;
case HAL_SMARTCARD_MSPINIT_CB_ID :
- hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; /* Legacy weak MspInitCallback */
+ hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; /* Legacy weak MspInitCallback */
break;
case HAL_SMARTCARD_MSPDEINIT_CB_ID :
- hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; /* Legacy weak MspDeInitCallback */
+ hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; /* Legacy weak MspDeInitCallback */
break;
default :
@@ -725,62 +730,67 @@
(+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register.
[..]
- (+) There are two modes of transfer:
- (++) Blocking mode: The communication is performed in polling mode.
+ (#) There are two modes of transfer:
+ (##) Blocking mode: The communication is performed in polling mode.
The HAL status of all data processing is returned by the same function
after finishing transfer.
- (++) Non-Blocking mode: The communication is performed using Interrupts
+ (##) Non-Blocking mode: The communication is performed using Interrupts
or DMA, the relevant API's return the HAL status.
The end of the data processing will be indicated through the
dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when
using DMA mode.
- (++) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks
+ (##) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks
will be executed respectively at the end of the Transmit or Receive process
The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication
error is detected.
- (+) Blocking mode APIs are :
- (++) HAL_SMARTCARD_Transmit()
- (++) HAL_SMARTCARD_Receive()
+ (#) Blocking mode APIs are :
+ (##) HAL_SMARTCARD_Transmit()
+ (##) HAL_SMARTCARD_Receive()
- (+) Non Blocking mode APIs with Interrupt are :
- (++) HAL_SMARTCARD_Transmit_IT()
- (++) HAL_SMARTCARD_Receive_IT()
- (++) HAL_SMARTCARD_IRQHandler()
+ (#) Non Blocking mode APIs with Interrupt are :
+ (##) HAL_SMARTCARD_Transmit_IT()
+ (##) HAL_SMARTCARD_Receive_IT()
+ (##) HAL_SMARTCARD_IRQHandler()
- (+) Non Blocking mode functions with DMA are :
- (++) HAL_SMARTCARD_Transmit_DMA()
- (++) HAL_SMARTCARD_Receive_DMA()
+ (#) Non Blocking mode functions with DMA are :
+ (##) HAL_SMARTCARD_Transmit_DMA()
+ (##) HAL_SMARTCARD_Receive_DMA()
- (+) A set of Transfer Complete Callbacks are provided in non Blocking mode:
- (++) HAL_SMARTCARD_TxCpltCallback()
- (++) HAL_SMARTCARD_RxCpltCallback()
- (++) HAL_SMARTCARD_ErrorCallback()
+ (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+ (##) HAL_SMARTCARD_TxCpltCallback()
+ (##) HAL_SMARTCARD_RxCpltCallback()
+ (##) HAL_SMARTCARD_ErrorCallback()
[..]
(#) Non-Blocking mode transfers could be aborted using Abort API's :
- (++) HAL_SMARTCARD_Abort()
- (++) HAL_SMARTCARD_AbortTransmit()
- (++) HAL_SMARTCARD_AbortReceive()
- (++) HAL_SMARTCARD_Abort_IT()
- (++) HAL_SMARTCARD_AbortTransmit_IT()
- (++) HAL_SMARTCARD_AbortReceive_IT()
+ (##) HAL_SMARTCARD_Abort()
+ (##) HAL_SMARTCARD_AbortTransmit()
+ (##) HAL_SMARTCARD_AbortReceive()
+ (##) HAL_SMARTCARD_Abort_IT()
+ (##) HAL_SMARTCARD_AbortTransmit_IT()
+ (##) HAL_SMARTCARD_AbortReceive_IT()
- (#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT), a set of Abort Complete Callbacks are provided:
- (++) HAL_SMARTCARD_AbortCpltCallback()
- (++) HAL_SMARTCARD_AbortTransmitCpltCallback()
- (++) HAL_SMARTCARD_AbortReceiveCpltCallback()
+ (#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT),
+ a set of Abort Complete Callbacks are provided:
+ (##) HAL_SMARTCARD_AbortCpltCallback()
+ (##) HAL_SMARTCARD_AbortTransmitCpltCallback()
+ (##) HAL_SMARTCARD_AbortReceiveCpltCallback()
(#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
Errors are handled as follows :
- (++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is
- to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception .
- Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type,
- and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side.
- If user wants to abort it, Abort services should be called by user.
- (++) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
- This concerns Frame Error in Interrupt mode transmission, Overrun Error in Interrupt mode reception and all errors in DMA mode.
- Error code is set to allow user to identify error type, and HAL_SMARTCARD_ErrorCallback() user callback is executed.
+ (##) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is
+ to be evaluated by user : this concerns Frame Error,
+ Parity Error or Noise Error in Interrupt mode reception .
+ Received character is then retrieved and stored in Rx buffer,
+ Error code is set to allow user to identify error type,
+ and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side.
+ If user wants to abort it, Abort services should be called by user.
+ (##) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
+ This concerns Frame Error in Interrupt mode transmission, Overrun Error in Interrupt
+ mode reception and all errors in DMA mode.
+ Error code is set to allow user to identify error type,
+ and HAL_SMARTCARD_ErrorCallback() user callback is executed.
@endverbatim
* @{
@@ -828,7 +838,7 @@
the bidirectional line to detect a NACK signal in case of parity error.
Therefore, the receiver block must be enabled as well (RE bit must be set). */
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
- && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
+ && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
{
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
}
@@ -855,8 +865,8 @@
hsmartcard->Instance->TDR = (uint8_t)(*ptmpdata & 0xFFU);
ptmpdata++;
}
- if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_TRANSMISSION_COMPLETION_FLAG(hsmartcard), RESET, tickstart,
- Timeout) != HAL_OK)
+ if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_TRANSMISSION_COMPLETION_FLAG(hsmartcard), RESET,
+ tickstart, Timeout) != HAL_OK)
{
return HAL_TIMEOUT;
}
@@ -864,14 +874,14 @@
/* Disable the Peripheral first to update mode */
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
- && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
+ && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
{
/* In case of TX only mode, if NACK is enabled, receiver block has been enabled
for Transmit phase. Disable this receiver block. */
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
}
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX)
- || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
+ || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
{
/* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */
__HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
@@ -1001,7 +1011,7 @@
the bidirectional line to detect a NACK signal in case of parity error.
Therefore, the receiver block must be enabled as well (RE bit must be set). */
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
- && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
+ && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
{
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
}
@@ -1158,7 +1168,7 @@
the bidirectional line to detect a NACK signal in case of parity error.
Therefore, the receiver block must be enabled as well (RE bit must be set). */
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
- && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
+ && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
{
SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
}
@@ -1311,7 +1321,8 @@
*/
HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard)
{
- /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */
+ /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and
+ ERR (Frame error, noise error, overrun error) interrupts */
CLEAR_BIT(hsmartcard->Instance->CR1,
(USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE |
USART_CR1_EOBIE));
@@ -1373,8 +1384,8 @@
/* Clear the Error flags in the ICR register */
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
- SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF |
- SMARTCARD_CLEAR_EOBF);
+ SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
+ SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
/* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
@@ -1465,7 +1476,8 @@
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard)
{
/* Disable RTOIE, EOBIE, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE));
+ CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE |
+ USART_CR1_EOBIE));
CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
/* Check if a Transmit process is ongoing or not. If not disable ERR IT */
@@ -1505,8 +1517,8 @@
/* Clear the Error flags in the ICR register */
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
- SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF |
- SMARTCARD_CLEAR_EOBF);
+ SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
+ SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
/* Restore hsmartcard->RxState to Ready */
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
@@ -1533,14 +1545,16 @@
{
uint32_t abortcplt = 1U;
- /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */
+ /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and
+ ERR (Frame error, noise error, overrun error) interrupts */
CLEAR_BIT(hsmartcard->Instance->CR1,
(USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE |
USART_CR1_EOBIE));
CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE));
- /* If DMA Tx and/or DMA Rx Handles are associated to SMARTCARD Handle, DMA Abort complete callbacks should be initialised
- before any call to DMA Abort functions */
+ /* If DMA Tx and/or DMA Rx Handles are associated to SMARTCARD Handle,
+ DMA Abort complete callbacks should be initialised before any call
+ to DMA Abort functions */
/* DMA Tx Handle is valid */
if (hsmartcard->hdmatx != NULL)
{
@@ -1634,8 +1648,8 @@
/* Clear the Error flags in the ICR register */
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
- SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF |
- SMARTCARD_CLEAR_EOBF);
+ SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF |
+ SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
/* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
@@ -1767,7 +1781,8 @@
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard)
{
/* Disable RTOIE, EOBIE, RXNE, PE, RXFT and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE | USART_CR1_EOBIE));
+ CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE |
+ USART_CR1_EOBIE));
CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
/* Check if a Transmit process is ongoing or not. If not disable ERR IT */
@@ -1806,8 +1821,8 @@
/* Clear the Error flags in the ICR register */
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
- SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF |
- SMARTCARD_CLEAR_EOBF);
+ SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF |
+ SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
/* Restore hsmartcard->RxState to Ready */
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
@@ -1832,8 +1847,8 @@
/* Clear the Error flags in the ICR register */
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
- SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF |
- SMARTCARD_CLEAR_EOBF);
+ SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF |
+ SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
/* Restore hsmartcard->RxState to Ready */
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
@@ -2304,14 +2319,18 @@
void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard)
{
/* Init the SMARTCARD Callback settings */
- hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */
- hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */
- hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */
- hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
- hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak AbortTransmitCpltCallback */
- hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak AbortReceiveCpltCallback */
- hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */
- hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */
+ hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */
+ hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */
+ hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */
+ hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
+ hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak
+ AbortTransmitCpltCallback */
+ hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak
+ AbortReceiveCpltCallback */
+ hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak
+ RxFifoFullCallback */
+ hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak
+ TxFifoEmptyCallback */
}
#endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
@@ -2327,7 +2346,7 @@
uint32_t tmpreg;
SMARTCARD_ClockSourceTypeDef clocksource;
HAL_StatusTypeDef ret = HAL_OK;
- const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U};
+ static const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U};
uint32_t pclk;
/* Check the parameters */
@@ -2352,8 +2371,8 @@
* Configure the Parity and Mode:
* set PS bit according to hsmartcard->Init.Parity value
* set TE and RE bits according to hsmartcard->Init.Mode value */
- tmpreg = (uint32_t) hsmartcard->Init.Parity | hsmartcard->Init.Mode;
- tmpreg |= (uint32_t) hsmartcard->Init.WordLength | hsmartcard->FifoMode;
+ tmpreg = (((uint32_t)hsmartcard->Init.Parity) | ((uint32_t)hsmartcard->Init.Mode) |
+ ((uint32_t)hsmartcard->Init.WordLength));
MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg);
/*-------------------------- USART CR2 Configuration -----------------------*/
@@ -2401,17 +2420,21 @@
{
case SMARTCARD_CLOCKSOURCE_PCLK1:
pclk = HAL_RCC_GetPCLK1Freq();
- tmpreg = (uint16_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
+ tmpreg = (uint16_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) +
+ (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
break;
case SMARTCARD_CLOCKSOURCE_HSI:
- tmpreg = (uint16_t)(((HSI_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
+ tmpreg = (uint16_t)(((HSI_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) +
+ (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
break;
case SMARTCARD_CLOCKSOURCE_SYSCLK:
pclk = HAL_RCC_GetSysClockFreq();
- tmpreg = (uint16_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
+ tmpreg = (uint16_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) +
+ (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
break;
case SMARTCARD_CLOCKSOURCE_LSE:
- tmpreg = (uint16_t)(((uint16_t)(LSE_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) + (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
+ tmpreg = (uint16_t)(((uint16_t)(LSE_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) +
+ (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
break;
default:
ret = HAL_ERROR;
@@ -2572,7 +2595,8 @@
{
if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
{
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+ /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error)
+ interrupts for the interrupt process */
CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE));
CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
@@ -2766,8 +2790,8 @@
/* Clear the Error flags in the ICR register */
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
- SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF |
- SMARTCARD_CLEAR_EOBF);
+ SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
+ SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
/* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
@@ -2815,8 +2839,8 @@
/* Clear the Error flags in the ICR register */
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
- SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF |
- SMARTCARD_CLEAR_EOBF);
+ SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
+ SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
/* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
@@ -2877,8 +2901,8 @@
/* Clear the Error flags in the ICR register */
__HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
- SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF |
- SMARTCARD_CLEAR_EOBF);
+ SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
+ SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
/* Restore hsmartcard->RxState to Ready */
hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
@@ -2984,14 +3008,14 @@
/* Disable the Peripheral first to update mode */
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
- && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
+ && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
{
/* In case of TX only mode, if NACK is enabled, receiver block has been enabled
for Transmit phase. Disable this receiver block. */
CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
}
if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX)
- || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
+ || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
{
/* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */
__HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
diff --git a/Src/stm32g0xx_hal_smartcard_ex.c b/Src/stm32g0xx_hal_smartcard_ex.c
index 0f36ec3..6047900 100644
--- a/Src/stm32g0xx_hal_smartcard_ex.c
+++ b/Src/stm32g0xx_hal_smartcard_ex.c
@@ -458,8 +458,8 @@
uint8_t rx_fifo_threshold;
uint8_t tx_fifo_threshold;
/* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */
- uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
- uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
+ static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
+ static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_DISABLE)
{
@@ -472,8 +472,10 @@
tx_fifo_depth = TX_FIFO_DEPTH;
rx_fifo_threshold = (uint8_t)(READ_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos);
tx_fifo_threshold = (uint8_t)(READ_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos);
- hsmartcard->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / (uint16_t)denominator[tx_fifo_threshold];
- hsmartcard->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / (uint16_t)denominator[rx_fifo_threshold];
+ hsmartcard->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / \
+ (uint16_t)denominator[tx_fifo_threshold];
+ hsmartcard->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / \
+ (uint16_t)denominator[rx_fifo_threshold];
}
}
diff --git a/Src/stm32g0xx_hal_smbus.c b/Src/stm32g0xx_hal_smbus.c
index a386ceb..99a24da 100644
--- a/Src/stm32g0xx_hal_smbus.c
+++ b/Src/stm32g0xx_hal_smbus.c
@@ -44,35 +44,41 @@
*** Interrupt mode IO operation ***
===================================
[..]
- (+) Transmit in master/host SMBUS mode an amount of data in non-blocking mode using @ref HAL_SMBUS_Master_Transmit_IT()
- (++) At transmission end of transfer @ref HAL_SMBUS_MasterTxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_SMBUS_MasterTxCpltCallback()
- (+) Receive in master/host SMBUS mode an amount of data in non-blocking mode using @ref HAL_SMBUS_Master_Receive_IT()
- (++) At reception end of transfer @ref HAL_SMBUS_MasterRxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_SMBUS_MasterRxCpltCallback()
+ (+) Transmit in master/host SMBUS mode an amount of data in non-blocking mode
+ using @ref HAL_SMBUS_Master_Transmit_IT()
+ (++) At transmission end of transfer @ref HAL_SMBUS_MasterTxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_SMBUS_MasterTxCpltCallback()
+ (+) Receive in master/host SMBUS mode an amount of data in non-blocking mode
+ using @ref HAL_SMBUS_Master_Receive_IT()
+ (++) At reception end of transfer @ref HAL_SMBUS_MasterRxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_SMBUS_MasterRxCpltCallback()
(+) Abort a master/host SMBUS process communication with Interrupt using @ref HAL_SMBUS_Master_Abort_IT()
(++) The associated previous transfer callback is called at the end of abort process
(++) mean @ref HAL_SMBUS_MasterTxCpltCallback() in case of previous state was master transmit
(++) mean @ref HAL_SMBUS_MasterRxCpltCallback() in case of previous state was master receive
(+) Enable/disable the Address listen mode in slave/device or host/slave SMBUS mode
using @ref HAL_SMBUS_EnableListen_IT() @ref HAL_SMBUS_DisableListen_IT()
- (++) When address slave/device SMBUS match, @ref HAL_SMBUS_AddrCallback() is executed and user can
- add his own code to check the Address Match Code and the transmission direction request by master/host (Write/Read).
- (++) At Listen mode end @ref HAL_SMBUS_ListenCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_SMBUS_ListenCpltCallback()
- (+) Transmit in slave/device SMBUS mode an amount of data in non-blocking mode using @ref HAL_SMBUS_Slave_Transmit_IT()
- (++) At transmission end of transfer @ref HAL_SMBUS_SlaveTxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_SMBUS_SlaveTxCpltCallback()
- (+) Receive in slave/device SMBUS mode an amount of data in non-blocking mode using @ref HAL_SMBUS_Slave_Receive_IT()
- (++) At reception end of transfer @ref HAL_SMBUS_SlaveRxCpltCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_SMBUS_SlaveRxCpltCallback()
- (+) Enable/Disable the SMBUS alert mode using @ref HAL_SMBUS_EnableAlert_IT() @ref HAL_SMBUS_DisableAlert_IT()
- (++) When SMBUS Alert is generated @ref HAL_SMBUS_ErrorCallback() is executed and user can
- add his own code by customization of function pointer @ref HAL_SMBUS_ErrorCallback()
+ (++) When address slave/device SMBUS match, @ref HAL_SMBUS_AddrCallback() is executed and users can
+ add their own code to check the Address Match Code and the transmission direction
+ request by master/host (Write/Read).
+ (++) At Listen mode end @ref HAL_SMBUS_ListenCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_SMBUS_ListenCpltCallback()
+ (+) Transmit in slave/device SMBUS mode an amount of data in non-blocking mode
+ using @ref HAL_SMBUS_Slave_Transmit_IT()
+ (++) At transmission end of transfer @ref HAL_SMBUS_SlaveTxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_SMBUS_SlaveTxCpltCallback()
+ (+) Receive in slave/device SMBUS mode an amount of data in non-blocking mode
+ using @ref HAL_SMBUS_Slave_Receive_IT()
+ (++) At reception end of transfer @ref HAL_SMBUS_SlaveRxCpltCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_SMBUS_SlaveRxCpltCallback()
+ (+) Enable/Disable the SMBUS alert mode using
+ @ref HAL_SMBUS_EnableAlert_IT() or @ref HAL_SMBUS_DisableAlert_IT()
+ (++) When SMBUS Alert is generated @ref HAL_SMBUS_ErrorCallback() is executed and users can
+ add their own code by customization of function pointer @ref HAL_SMBUS_ErrorCallback()
to check the Alert Error Code using function @ref HAL_SMBUS_GetError()
(+) Get HAL state machine or error values using @ref HAL_SMBUS_GetState() or @ref HAL_SMBUS_GetError()
- (+) In case of transfer Error, @ref HAL_SMBUS_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer @ref HAL_SMBUS_ErrorCallback()
+ (+) In case of transfer Error, @ref HAL_SMBUS_ErrorCallback() function is executed and users can
+ add their own code by customization of function pointer @ref HAL_SMBUS_ErrorCallback()
to check the Error Code using function @ref HAL_SMBUS_GetError()
*** SMBUS HAL driver macros list ***
@@ -203,7 +209,8 @@
/** @addtogroup SMBUS_Private_Functions SMBUS Private Functions
* @{
*/
-static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag,
+ FlagStatus Status, uint32_t Timeout);
static void SMBUS_Enable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest);
static void SMBUS_Disable_IRQ(SMBUS_HandleTypeDef *hsmbus, uint32_t InterruptRequest);
@@ -214,7 +221,8 @@
static void SMBUS_ITErrorHandler(SMBUS_HandleTypeDef *hsmbus);
-static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size,
+ uint32_t Mode, uint32_t Request);
/**
* @}
*/
@@ -226,8 +234,8 @@
*/
/** @defgroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
+ * @brief Initialization and Configuration functions
+ *
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
@@ -362,15 +370,20 @@
/*---------------------------- SMBUSx OAR2 Configuration -----------------------*/
/* Configure SMBUSx: Dual mode and Own Address2 */
- hsmbus->Instance->OAR2 = (hsmbus->Init.DualAddressMode | hsmbus->Init.OwnAddress2 | (hsmbus->Init.OwnAddress2Masks << 8U));
+ hsmbus->Instance->OAR2 = (hsmbus->Init.DualAddressMode | hsmbus->Init.OwnAddress2 | \
+ (hsmbus->Init.OwnAddress2Masks << 8U));
/*---------------------------- SMBUSx CR1 Configuration ------------------------*/
/* Configure SMBUSx: Generalcall and NoStretch mode */
- hsmbus->Instance->CR1 = (hsmbus->Init.GeneralCallMode | hsmbus->Init.NoStretchMode | hsmbus->Init.PacketErrorCheckMode | hsmbus->Init.PeripheralMode | hsmbus->Init.AnalogFilter);
+ hsmbus->Instance->CR1 = (hsmbus->Init.GeneralCallMode | hsmbus->Init.NoStretchMode | \
+ hsmbus->Init.PacketErrorCheckMode | hsmbus->Init.PeripheralMode | \
+ hsmbus->Init.AnalogFilter);
- /* Enable Slave Byte Control only in case of Packet Error Check is enabled and SMBUS Peripheral is set in Slave mode */
- if ((hsmbus->Init.PacketErrorCheckMode == SMBUS_PEC_ENABLE)
- && ((hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || (hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP)))
+ /* Enable Slave Byte Control only in case of Packet Error Check is enabled
+ and SMBUS Peripheral is set in Slave mode */
+ if ((hsmbus->Init.PacketErrorCheckMode == SMBUS_PEC_ENABLE) && \
+ ((hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \
+ (hsmbus->Init.PeripheralMode == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP)))
{
hsmbus->Instance->CR1 |= I2C_CR1_SBC;
}
@@ -579,7 +592,9 @@
* @param pCallback pointer to the Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID, pSMBUS_CallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_SMBUS_RegisterCallback(SMBUS_HandleTypeDef *hsmbus,
+ HAL_SMBUS_CallbackIDTypeDef CallbackID,
+ pSMBUS_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -692,7 +707,8 @@
* @arg @ref HAL_SMBUS_MSPDEINIT_CB_ID MspDeInit callback ID
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus, HAL_SMBUS_CallbackIDTypeDef CallbackID)
+HAL_StatusTypeDef HAL_SMBUS_UnRegisterCallback(SMBUS_HandleTypeDef *hsmbus,
+ HAL_SMBUS_CallbackIDTypeDef CallbackID)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -787,7 +803,8 @@
* @param pCallback pointer to the Address Match Callback function
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus, pSMBUS_AddrCallbackTypeDef pCallback)
+HAL_StatusTypeDef HAL_SMBUS_RegisterAddrCallback(SMBUS_HandleTypeDef *hsmbus,
+ pSMBUS_AddrCallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
@@ -858,8 +875,8 @@
*/
/** @defgroup SMBUS_Exported_Functions_Group2 Input and Output operation functions
- * @brief Data transfers functions
- *
+ * @brief Data transfers functions
+ *
@verbatim
===============================================================================
##### IO operation functions #####
@@ -911,7 +928,8 @@
* @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress,
+ uint8_t *pData, uint16_t Size, uint32_t XferOptions)
{
uint32_t tmp;
@@ -950,7 +968,9 @@
/* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */
if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE))
{
- SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_GENERATE_START_WRITE);
+ SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize,
+ SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE),
+ SMBUS_GENERATE_START_WRITE);
}
else
{
@@ -960,9 +980,11 @@
/* Store current volatile XferOptions, misra rule */
tmp = hsmbus->XferOptions;
- if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX) && (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0))
+ if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_TX) && \
+ (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0))
{
- SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions,
+ SMBUS_NO_STARTSTOP);
}
/* Else transfer direction change, so generate Restart with new transfer direction */
else
@@ -971,7 +993,9 @@
SMBUS_ConvertOtherXferOptions(hsmbus);
/* Handle Transfer */
- SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_GENERATE_START_WRITE);
+ SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize,
+ hsmbus->XferOptions,
+ SMBUS_GENERATE_START_WRITE);
}
/* If PEC mode is enable, size to transmit manage by SW part should be Size-1 byte, corresponding to PEC byte */
@@ -1010,7 +1034,8 @@
* @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData,
+ uint16_t Size, uint32_t XferOptions)
{
uint32_t tmp;
@@ -1050,7 +1075,9 @@
/* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */
if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE))
{
- SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_GENERATE_START_READ);
+ SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize,
+ SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE),
+ SMBUS_GENERATE_START_READ);
}
else
{
@@ -1060,9 +1087,11 @@
/* Store current volatile XferOptions, Misra rule */
tmp = hsmbus->XferOptions;
- if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX) && (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0))
+ if ((hsmbus->PreviousState == HAL_SMBUS_STATE_MASTER_BUSY_RX) && \
+ (IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(tmp) == 0))
{
- SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions,
+ SMBUS_NO_STARTSTOP);
}
/* Else transfer direction change, so generate Restart with new transfer direction */
else
@@ -1071,7 +1100,9 @@
SMBUS_ConvertOtherXferOptions(hsmbus);
/* Handle Transfer */
- SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_GENERATE_START_READ);
+ SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize,
+ hsmbus->XferOptions,
+ SMBUS_GENERATE_START_READ);
}
}
@@ -1165,7 +1196,8 @@
* @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions)
{
/* Check the parameters */
assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions));
@@ -1213,12 +1245,15 @@
/* Set NBYTES to write and reload if size > MAX_NBYTE_SIZE and generate RESTART */
if ((hsmbus->XferSize < hsmbus->XferCount) && (hsmbus->XferSize == MAX_NBYTE_SIZE))
{
- SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_NO_STARTSTOP);
+ SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize,
+ SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE),
+ SMBUS_NO_STARTSTOP);
}
else
{
/* Set NBYTE to transmit */
- SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions,
+ SMBUS_NO_STARTSTOP);
/* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */
/* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */
@@ -1259,7 +1294,8 @@
* @param XferOptions Options of Transfer, value of @ref SMBUS_XferOptions_definition
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
+HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size,
+ uint32_t XferOptions)
{
/* Check the parameters */
assert_param(IS_SMBUS_TRANSFER_OPTIONS_REQUEST(XferOptions));
@@ -1303,7 +1339,8 @@
/* This RELOAD bit will be reset for last BYTE to be receive in SMBUS_Slave_ISR */
if (((SMBUS_GET_PEC_MODE(hsmbus) != 0UL) && (hsmbus->XferSize == 2U)) || (hsmbus->XferSize == 1U))
{
- SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions,
+ SMBUS_NO_STARTSTOP);
}
else
{
@@ -1417,7 +1454,8 @@
* @param Timeout Timeout duration
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials,
+ uint32_t Timeout)
{
uint32_t tickstart;
@@ -1526,8 +1564,7 @@
/* Increment Trials */
SMBUS_Trials++;
- }
- while (SMBUS_Trials < Trials);
+ } while (SMBUS_Trials < Trials);
hsmbus->State = HAL_SMBUS_STATE_READY;
@@ -1549,8 +1586,8 @@
*/
/** @defgroup SMBUS_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
- * @{
- */
+ * @{
+ */
/**
* @brief Handle SMBUS event interrupt request.
@@ -1566,7 +1603,13 @@
uint32_t tmpcr1value = READ_REG(hsmbus->Instance->CR1);
/* SMBUS in mode Transmitter ---------------------------------------------------*/
- if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI)) != RESET) && ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TXIS) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET)))
+ if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI |
+ SMBUS_IT_NACKI | SMBUS_IT_TXI)) != RESET) &&
+ ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TXIS) != RESET) ||
+ (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) ||
+ (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) ||
+ (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) ||
+ (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET)))
{
/* Slave mode selected */
if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_TX) == HAL_SMBUS_STATE_SLAVE_BUSY_TX)
@@ -1585,7 +1628,13 @@
}
/* SMBUS in mode Receiver ----------------------------------------------------*/
- if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_RXI)) != RESET) && ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_RXNE) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET)))
+ if ((SMBUS_CHECK_IT_SOURCE(tmpcr1value, (SMBUS_IT_TCI | SMBUS_IT_STOPI |
+ SMBUS_IT_NACKI | SMBUS_IT_RXI)) != RESET) &&
+ ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_RXNE) != RESET) ||
+ (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TCR) != RESET) ||
+ (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_TC) != RESET) ||
+ (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) ||
+ (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET)))
{
/* Slave mode selected */
if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX)
@@ -1604,7 +1653,12 @@
}
/* SMBUS in mode Listener Only --------------------------------------------------*/
- if (((SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_ADDRI) != RESET) || (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_STOPI) != RESET) || (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_NACKI) != RESET)) && ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_ADDR) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) || (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET)))
+ if (((SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_ADDRI) != RESET) ||
+ (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_STOPI) != RESET) ||
+ (SMBUS_CHECK_IT_SOURCE(tmpcr1value, SMBUS_IT_NACKI) != RESET)) &&
+ ((SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_ADDR) != RESET) ||
+ (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_STOPF) != RESET) ||
+ (SMBUS_CHECK_FLAG(tmpisrvalue, SMBUS_FLAG_AF) != RESET)))
{
if ((hsmbus->State & HAL_SMBUS_STATE_LISTEN) == HAL_SMBUS_STATE_LISTEN)
{
@@ -1695,7 +1749,8 @@
* @param AddrMatchCode Address Match Code
* @retval None
*/
-__weak void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode)
+__weak void HAL_SMBUS_AddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection,
+ uint16_t AddrMatchCode)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hsmbus);
@@ -1744,8 +1799,8 @@
*/
/** @defgroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions
- * @brief Peripheral State and Errors functions
- *
+ * @brief Peripheral State and Errors functions
+ *
@verbatim
===============================================================================
##### Peripheral State and Errors functions #####
@@ -1771,11 +1826,11 @@
}
/**
-* @brief Return the SMBUS error code.
+ * @brief Return the SMBUS error code.
* @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains
* the configuration information for the specified SMBUS.
-* @retval SMBUS Error Code
-*/
+ * @retval SMBUS Error Code
+ */
uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus)
{
return hsmbus->ErrorCode;
@@ -1790,7 +1845,7 @@
*/
/** @addtogroup SMBUS_Private_Functions SMBUS Private Functions
- * @brief Data transfers Private functions
+ * @brief Data transfers Private functions
* @{
*/
@@ -1941,13 +1996,16 @@
if (hsmbus->XferCount > MAX_NBYTE_SIZE)
{
- SMBUS_TransferConfig(hsmbus, DevAddress, MAX_NBYTE_SIZE, (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), SMBUS_NO_STARTSTOP);
+ SMBUS_TransferConfig(hsmbus, DevAddress, MAX_NBYTE_SIZE,
+ (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)),
+ SMBUS_NO_STARTSTOP);
hsmbus->XferSize = MAX_NBYTE_SIZE;
}
else
{
hsmbus->XferSize = hsmbus->XferCount;
- SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ SMBUS_TransferConfig(hsmbus, DevAddress, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions,
+ SMBUS_NO_STARTSTOP);
/* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */
/* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */
if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL)
@@ -2155,7 +2213,8 @@
HAL_SMBUS_AddrCallback(hsmbus, TransferDirection, SlaveAddrCode);
#endif /* USE_HAL_SMBUS_REGISTER_CALLBACKS */
}
- else if ((SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) || (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TCR) != RESET))
+ else if ((SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_RXNE) != RESET) ||
+ (SMBUS_CHECK_FLAG(StatusFlags, SMBUS_FLAG_TCR) != RESET))
{
if ((hsmbus->State & HAL_SMBUS_STATE_SLAVE_BUSY_RX) == HAL_SMBUS_STATE_SLAVE_BUSY_RX)
{
@@ -2198,7 +2257,9 @@
else
{
/* Set Reload for next Bytes */
- SMBUS_TransferConfig(hsmbus, 0, 1, SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE), SMBUS_NO_STARTSTOP);
+ SMBUS_TransferConfig(hsmbus, 0, 1,
+ SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE),
+ SMBUS_NO_STARTSTOP);
/* Ack last Byte Read */
hsmbus->Instance->CR2 &= ~I2C_CR2_NACK;
@@ -2210,13 +2271,16 @@
{
if (hsmbus->XferCount > MAX_NBYTE_SIZE)
{
- SMBUS_TransferConfig(hsmbus, 0, MAX_NBYTE_SIZE, (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)), SMBUS_NO_STARTSTOP);
+ SMBUS_TransferConfig(hsmbus, 0, MAX_NBYTE_SIZE,
+ (SMBUS_RELOAD_MODE | (hsmbus->XferOptions & SMBUS_SENDPEC_MODE)),
+ SMBUS_NO_STARTSTOP);
hsmbus->XferSize = MAX_NBYTE_SIZE;
}
else
{
hsmbus->XferSize = hsmbus->XferCount;
- SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions, SMBUS_NO_STARTSTOP);
+ SMBUS_TransferConfig(hsmbus, 0, (uint8_t)hsmbus->XferSize, hsmbus->XferOptions,
+ SMBUS_NO_STARTSTOP);
/* If PEC mode is enable, size to transmit should be Size-1 byte, corresponding to PEC byte */
/* PEC byte is automatically sent by HW block, no need to manage it in Transmit process */
if (SMBUS_GET_PEC_MODE(hsmbus) != 0UL)
@@ -2461,7 +2525,8 @@
uint32_t tmperror;
/* SMBUS Bus error interrupt occurred ------------------------------------*/
- if (((itflags & SMBUS_FLAG_BERR) == SMBUS_FLAG_BERR) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
+ if (((itflags & SMBUS_FLAG_BERR) == SMBUS_FLAG_BERR) && \
+ ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
{
hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BERR;
@@ -2470,7 +2535,8 @@
}
/* SMBUS Over-Run/Under-Run interrupt occurred ----------------------------------------*/
- if (((itflags & SMBUS_FLAG_OVR) == SMBUS_FLAG_OVR) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
+ if (((itflags & SMBUS_FLAG_OVR) == SMBUS_FLAG_OVR) && \
+ ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
{
hsmbus->ErrorCode |= HAL_SMBUS_ERROR_OVR;
@@ -2479,7 +2545,8 @@
}
/* SMBUS Arbitration Loss error interrupt occurred ------------------------------------*/
- if (((itflags & SMBUS_FLAG_ARLO) == SMBUS_FLAG_ARLO) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
+ if (((itflags & SMBUS_FLAG_ARLO) == SMBUS_FLAG_ARLO) && \
+ ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
{
hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ARLO;
@@ -2488,7 +2555,8 @@
}
/* SMBUS Timeout error interrupt occurred ---------------------------------------------*/
- if (((itflags & SMBUS_FLAG_TIMEOUT) == SMBUS_FLAG_TIMEOUT) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
+ if (((itflags & SMBUS_FLAG_TIMEOUT) == SMBUS_FLAG_TIMEOUT) && \
+ ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
{
hsmbus->ErrorCode |= HAL_SMBUS_ERROR_BUSTIMEOUT;
@@ -2497,7 +2565,8 @@
}
/* SMBUS Alert error interrupt occurred -----------------------------------------------*/
- if (((itflags & SMBUS_FLAG_ALERT) == SMBUS_FLAG_ALERT) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
+ if (((itflags & SMBUS_FLAG_ALERT) == SMBUS_FLAG_ALERT) && \
+ ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
{
hsmbus->ErrorCode |= HAL_SMBUS_ERROR_ALERT;
@@ -2506,7 +2575,8 @@
}
/* SMBUS Packet Error Check error interrupt occurred ----------------------------------*/
- if (((itflags & SMBUS_FLAG_PECERR) == SMBUS_FLAG_PECERR) && ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
+ if (((itflags & SMBUS_FLAG_PECERR) == SMBUS_FLAG_PECERR) && \
+ ((itsources & SMBUS_IT_ERRI) == SMBUS_IT_ERRI))
{
hsmbus->ErrorCode |= HAL_SMBUS_ERROR_PECERR;
@@ -2554,7 +2624,8 @@
* @param Timeout Timeout duration
* @retval HAL status
*/
-static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+static HAL_StatusTypeDef SMBUS_WaitOnFlagUntilTimeout(SMBUS_HandleTypeDef *hsmbus, uint32_t Flag,
+ FlagStatus Status, uint32_t Timeout)
{
uint32_t tickstart = HAL_GetTick();
@@ -2603,7 +2674,8 @@
* @arg @ref SMBUS_GENERATE_START_WRITE Generate Restart for write request.
* @retval None
*/
-static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+static void SMBUS_TransferConfig(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t Size,
+ uint32_t Mode, uint32_t Request)
{
/* Check the parameters */
assert_param(IS_SMBUS_ALL_INSTANCE(hsmbus->Instance));
@@ -2611,8 +2683,13 @@
assert_param(IS_SMBUS_TRANSFER_REQUEST(Request));
/* update CR2 register */
- MODIFY_REG(hsmbus->Instance->CR2, ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31UL - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_PECBYTE)), \
- (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request));
+ MODIFY_REG(hsmbus->Instance->CR2,
+ ((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \
+ (I2C_CR2_RD_WRN & (uint32_t)(Request >> (31UL - I2C_CR2_RD_WRN_Pos))) | \
+ I2C_CR2_START | I2C_CR2_STOP | I2C_CR2_PECBYTE)), \
+ (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | \
+ (((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | \
+ (uint32_t)Mode | (uint32_t)Request));
}
/**
diff --git a/Src/stm32g0xx_hal_smbus_ex.c b/Src/stm32g0xx_hal_smbus_ex.c
new file mode 100644
index 0000000..96d6b4e
--- /dev/null
+++ b/Src/stm32g0xx_hal_smbus_ex.c
@@ -0,0 +1,152 @@
+/**
+ ******************************************************************************
+ * @file stm32g0xx_hal_smbus_ex.c
+ * @author MCD Application Team
+ * @brief SMBUS Extended HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of SMBUS Extended peripheral:
+ * + Extended features functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### SMBUS peripheral Extended features #####
+ ==============================================================================
+
+ [..] Comparing to other previous devices, the SMBUS interface for STM32G0xx
+ devices contains the following additional features
+
+ (+) Disable or enable Fast Mode Plus
+
+ ##### How to use this driver #####
+ ==============================================================================
+ (#) Configure the enable or disable of fast mode plus driving capability using the functions :
+ (++) HAL_SMBUSEx_EnableFastModePlus()
+ (++) HAL_SMBUSEx_DisableFastModePlus()
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32g0xx_hal.h"
+
+/** @addtogroup STM32G0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SMBUSEx SMBUSEx
+ * @brief SMBUS Extended HAL module driver
+ * @{
+ */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SMBUSEx_Exported_Functions SMBUS Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup SMBUSEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ *
+@verbatim
+ ===============================================================================
+ ##### Extended features functions #####
+ ===============================================================================
+ [..] This section provides functions allowing to:
+
+ (+) Configure Fast Mode Plus
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enable the SMBUS fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref SMBUSEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be enabled on all selected
+ * I2C1 pins using SMBUS_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be enabled only by using SMBUS_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be enabled
+ * only by using SMBUS_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be enabled
+ * only by using SMBUS_FASTMODEPLUS_I2C3 parameter.
+ * @retval None
+ */
+void HAL_SMBUSEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_SMBUS_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Enable fast mode plus driving capability for selected pin */
+ SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+
+/**
+ * @brief Disable the SMBUS fast mode plus driving capability.
+ * @param ConfigFastModePlus Selects the pin.
+ * This parameter can be one of the @ref SMBUSEx_FastModePlus values
+ * @note For I2C1, fast mode plus driving capability can be disabled on all selected
+ * I2C1 pins using SMBUS_FASTMODEPLUS_I2C1 parameter or independently
+ * on each one of the following pins PB6, PB7, PB8 and PB9.
+ * @note For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
+ * can be disabled only by using SMBUS_FASTMODEPLUS_I2C1 parameter.
+ * @note For all I2C2 pins fast mode plus driving capability can be disabled
+ * only by using SMBUS_FASTMODEPLUS_I2C2 parameter.
+ * @note For all I2C3 pins fast mode plus driving capability can be disabled
+ * only by using SMBUS_FASTMODEPLUS_I2C3 parameter.
+ * @retval None
+ */
+void HAL_SMBUSEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
+{
+ /* Check the parameter */
+ assert_param(IS_SMBUS_FASTMODEPLUS(ConfigFastModePlus));
+
+ /* Enable SYSCFG clock */
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* Disable fast mode plus driving capability for selected pin */
+ CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
+}
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Src/stm32g0xx_hal_spi.c b/Src/stm32g0xx_hal_spi.c
index 6c1147a..0459865 100644
--- a/Src/stm32g0xx_hal_spi.c
+++ b/Src/stm32g0xx_hal_spi.c
@@ -987,6 +987,11 @@
*/
HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
{
+#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
+ __IO uint8_t * ptmpreg8;
+ __IO uint8_t tmpreg8 = 0;
+#endif /* USE_SPI_CRC */
uint32_t tickstart;
HAL_StatusTypeDef errorcode = HAL_OK;
@@ -1153,12 +1158,18 @@
if (hspi->Init.DataSize == SPI_DATASIZE_16BIT)
{
/* Read 16bit CRC */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
else
{
+ /* Initialize the 8bit temporary pointer */
+ ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
/* Read 8bit CRC */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
if ((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT))
{
@@ -1170,7 +1181,9 @@
goto error;
}
/* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
}
}
}
@@ -1220,8 +1233,11 @@
HAL_SPI_StateTypeDef tmp_state;
uint32_t tickstart;
#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
uint32_t spi_cr1;
uint32_t spi_cr2;
+ __IO uint8_t * ptmpreg8;
+ __IO uint8_t tmpreg8 = 0;
#endif /* USE_SPI_CRC */
/* Variable used to alternate Rx and Tx during transfer */
@@ -1422,12 +1438,18 @@
if (hspi->Init.DataSize == SPI_DATASIZE_16BIT)
{
/* Read 16bit CRC */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
else
{
+ /* Initialize the 8bit temporary pointer */
+ ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
/* Read 8bit CRC */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
{
@@ -1439,7 +1461,9 @@
goto error;
}
/* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
}
}
}
@@ -2994,6 +3018,11 @@
{
SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
uint32_t tickstart;
+#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
+ __IO uint8_t * ptmpreg8;
+ __IO uint8_t tmpreg8 = 0;
+#endif /* USE_SPI_CRC */
/* Init tickstart for timeout management*/
tickstart = HAL_GetTick();
@@ -3018,12 +3047,18 @@
if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
{
/* Read 16bit CRC */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
else
{
+ /* Initialize the 8bit temporary pointer */
+ ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
/* Read 8bit CRC */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
if (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
{
@@ -3033,7 +3068,9 @@
SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
}
/* Read 8bit CRC again in case of 16bit CRC in 8bit Data mode */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
}
}
}
@@ -3098,6 +3135,11 @@
{
SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
uint32_t tickstart;
+#if (USE_SPI_CRC != 0U)
+ __IO uint32_t tmpreg = 0U;
+ __IO uint8_t * ptmpreg8;
+ __IO uint8_t tmpreg8 = 0;
+#endif /* USE_SPI_CRC */
/* Init tickstart for timeout management*/
tickstart = HAL_GetTick();
@@ -3120,8 +3162,12 @@
/* Error on the CRC reception */
SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
}
- /* Read CRC to Flush DR and RXNE flag */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ /* Initialize the 8bit temporary pointer */
+ ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
+ /* Read 8bit CRC */
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
}
else
{
@@ -3131,7 +3177,9 @@
SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_CRC);
}
/* Read CRC to Flush DR and RXNE flag */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
}
}
#endif /* USE_SPI_CRC */
@@ -3466,8 +3514,15 @@
*/
static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint8_t * ptmpreg8;
+ __IO uint8_t tmpreg8 = 0;
+
+ /* Initialize the 8bit temporary pointer */
+ ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
/* Read 8bit CRC to flush Data Register */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
hspi->CRCSize--;
@@ -3574,8 +3629,12 @@
*/
static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint32_t tmpreg = 0U;
+
/* Read 16bit CRC to flush Data Register */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
/* Disable RXNE interrupt */
__HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
@@ -3630,8 +3689,15 @@
*/
static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint8_t * ptmpreg8;
+ __IO uint8_t tmpreg8 = 0;
+
+ /* Initialize the 8bit temporary pointer */
+ ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
/* Read 8bit CRC to flush Data Register */
- READ_REG(*(__IO uint8_t *)&hspi->Instance->DR);
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
hspi->CRCSize--;
@@ -3684,8 +3750,12 @@
*/
static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
{
+ __IO uint32_t tmpreg = 0U;
+
/* Read 16bit CRC to flush Data Register */
- READ_REG(hspi->Instance->DR);
+ tmpreg = READ_REG(hspi->Instance->DR);
+ /* To avoid GCC warning */
+ UNUSED(tmpreg);
/* Disable RXNE and ERR interrupt */
__HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
@@ -3863,11 +3933,16 @@
__IO uint32_t count;
uint32_t tmp_timeout;
uint32_t tmp_tickstart;
+ __IO uint8_t * ptmpreg8;
+ __IO uint8_t tmpreg8 = 0;
/* Adjust Timeout value in case of end of transfer */
tmp_timeout = Timeout - (HAL_GetTick() - Tickstart);
tmp_tickstart = HAL_GetTick();
+ /* Initialize the 8bit temporary pointer */
+ ptmpreg8 = (__IO uint8_t *)&hspi->Instance->DR;
+
/* Calculate Timeout based on a software loop to avoid blocking issue if Systick is disabled */
count = tmp_timeout * ((SystemCoreClock * 35U) >> 20U);
@@ -3875,8 +3950,10 @@
{
if ((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY))
{
- /* Read 8bit CRC to flush Data Register */
- READ_REG(*((__IO uint8_t *)&hspi->Instance->DR));
+ /* Flush Data Register by a blank read */
+ tmpreg8 = *ptmpreg8;
+ /* To avoid GCC warning */
+ UNUSED(tmpreg8);
}
if (Timeout != HAL_MAX_DELAY)
diff --git a/Src/stm32g0xx_hal_tim.c b/Src/stm32g0xx_hal_tim.c
index 08a0f39..cdde80f 100644
--- a/Src/stm32g0xx_hal_tim.c
+++ b/Src/stm32g0xx_hal_tim.c
@@ -569,7 +569,8 @@
htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1086,7 +1087,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1107,7 +1109,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1128,7 +1131,8 @@
htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1148,7 +1152,8 @@
htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1726,7 +1731,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1747,7 +1753,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1767,7 +1774,8 @@
htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1787,7 +1795,8 @@
htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -2341,6 +2350,23 @@
return HAL_ERROR;
}
+ /* Enable the Input Capture channel */
+ TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+
+ /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
+ if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
+ {
+ tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
+ if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+ }
+ else
+ {
+ __HAL_TIM_ENABLE(htim);
+ }
+
switch (Channel)
{
case TIM_CHANNEL_1:
@@ -2353,7 +2379,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -2373,7 +2400,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -2393,7 +2421,8 @@
htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -2413,7 +2442,8 @@
htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -2427,23 +2457,6 @@
break;
}
- /* Enable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
- if (IS_TIM_SLAVE_INSTANCE(htim->Instance))
- {
- tmpsmcr = htim->Instance->SMCR & TIM_SMCR_SMS;
- if (!IS_TIM_SLAVEMODE_TRIGGER_ENABLED(tmpsmcr))
- {
- __HAL_TIM_ENABLE(htim);
- }
- }
- else
- {
- __HAL_TIM_ENABLE(htim);
- }
-
/* Return function status */
return HAL_OK;
}
@@ -2698,11 +2711,12 @@
/**
* @brief Starts the TIM One Pulse signal generation.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2734,7 +2748,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
No need to enable the counter, it's enabled automatically by hardware
(the counter starts in response to a stimulus and generate a pulse */
@@ -2754,11 +2768,12 @@
/**
* @brief Stops the TIM One Pulse signal generation.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be disable
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2770,7 +2785,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
@@ -2796,11 +2811,12 @@
/**
* @brief Starts the TIM One Pulse signal generation in interrupt mode.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2832,7 +2848,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
No need to enable the counter, it's enabled automatically by hardware
(the counter starts in response to a stimulus and generate a pulse */
@@ -2858,11 +2874,12 @@
/**
* @brief Stops the TIM One Pulse signal generation in interrupt mode.
+ * @note Though OutputChannel parameter is deprecated and ignored by the function
+ * it has been kept to avoid HAL_TIM API compatibility break.
+ * @note The pulse output channel is determined when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channels to be enabled
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @param OutputChannel See note above
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
@@ -2880,7 +2897,7 @@
(in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+ whatever the combination, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
@@ -3563,7 +3580,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -3588,7 +3606,8 @@
/* Set the DMA error callback */
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -3614,7 +3633,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -3628,7 +3648,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -6105,115 +6126,143 @@
switch (CallbackID)
{
case HAL_TIM_BASE_MSPINIT_CB_ID :
- htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */
+ /* Legacy weak Base MspInit Callback */
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
break;
case HAL_TIM_BASE_MSPDEINIT_CB_ID :
- htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */
+ /* Legacy weak Base Msp DeInit Callback */
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
break;
case HAL_TIM_IC_MSPINIT_CB_ID :
- htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */
+ /* Legacy weak IC Msp Init Callback */
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
break;
case HAL_TIM_IC_MSPDEINIT_CB_ID :
- htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */
+ /* Legacy weak IC Msp DeInit Callback */
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
break;
case HAL_TIM_OC_MSPINIT_CB_ID :
- htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */
+ /* Legacy weak OC Msp Init Callback */
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspInit;
break;
case HAL_TIM_OC_MSPDEINIT_CB_ID :
- htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */
+ /* Legacy weak OC Msp DeInit Callback */
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
break;
case HAL_TIM_PWM_MSPINIT_CB_ID :
- htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */
+ /* Legacy weak PWM Msp Init Callback */
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
break;
case HAL_TIM_PWM_MSPDEINIT_CB_ID :
- htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */
+ /* Legacy weak PWM Msp DeInit Callback */
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
break;
case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
- htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */
+ /* Legacy weak One Pulse Msp Init Callback */
+ htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit;
break;
case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
- htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */
+ /* Legacy weak One Pulse Msp DeInit Callback */
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
break;
case HAL_TIM_ENCODER_MSPINIT_CB_ID :
- htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */
+ /* Legacy weak Encoder Msp Init Callback */
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
break;
case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
- htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */
+ /* Legacy weak Encoder Msp DeInit Callback */
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
break;
case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
- htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */
+ /* Legacy weak Hall Sensor Msp Init Callback */
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
break;
case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
- htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */
+ /* Legacy weak Hall Sensor Msp DeInit Callback */
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
break;
case HAL_TIM_PERIOD_ELAPSED_CB_ID :
- htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak Period Elapsed Callback */
+ /* Legacy weak Period Elapsed Callback */
+ htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback;
break;
case HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID :
- htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak Period Elapsed half complete Callback */
+ /* Legacy weak Period Elapsed half complete Callback */
+ htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback;
break;
case HAL_TIM_TRIGGER_CB_ID :
- htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak Trigger Callback */
+ /* Legacy weak Trigger Callback */
+ htim->TriggerCallback = HAL_TIM_TriggerCallback;
break;
case HAL_TIM_TRIGGER_HALF_CB_ID :
- htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak Trigger half complete Callback */
+ /* Legacy weak Trigger half complete Callback */
+ htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback;
break;
case HAL_TIM_IC_CAPTURE_CB_ID :
- htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC Capture Callback */
+ /* Legacy weak IC Capture Callback */
+ htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback;
break;
case HAL_TIM_IC_CAPTURE_HALF_CB_ID :
- htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC Capture half complete Callback */
+ /* Legacy weak IC Capture half complete Callback */
+ htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback;
break;
case HAL_TIM_OC_DELAY_ELAPSED_CB_ID :
- htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC Delay Elapsed Callback */
+ /* Legacy weak OC Delay Elapsed Callback */
+ htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback;
break;
case HAL_TIM_PWM_PULSE_FINISHED_CB_ID :
- htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM Pulse Finished Callback */
+ /* Legacy weak PWM Pulse Finished Callback */
+ htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback;
break;
case HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID :
- htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM Pulse Finished half complete Callback */
+ /* Legacy weak PWM Pulse Finished half complete Callback */
+ htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback;
break;
case HAL_TIM_ERROR_CB_ID :
- htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak Error Callback */
+ /* Legacy weak Error Callback */
+ htim->ErrorCallback = HAL_TIM_ErrorCallback;
break;
case HAL_TIM_COMMUTATION_CB_ID :
- htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak Commutation Callback */
+ /* Legacy weak Commutation Callback */
+ htim->CommutationCallback = HAL_TIMEx_CommutCallback;
break;
case HAL_TIM_COMMUTATION_HALF_CB_ID :
- htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak Commutation half complete Callback */
+ /* Legacy weak Commutation half complete Callback */
+ htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback;
break;
case HAL_TIM_BREAK_CB_ID :
- htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak Break Callback */
+ /* Legacy weak Break Callback */
+ htim->BreakCallback = HAL_TIMEx_BreakCallback;
break;
case HAL_TIM_BREAK2_CB_ID :
- htim->Break2Callback = HAL_TIMEx_Break2Callback; /* Legacy weak Break2 Callback */
+ /* Legacy weak Break2 Callback */
+ htim->Break2Callback = HAL_TIMEx_Break2Callback;
break;
default :
@@ -6227,59 +6276,73 @@
switch (CallbackID)
{
case HAL_TIM_BASE_MSPINIT_CB_ID :
- htim->Base_MspInitCallback = HAL_TIM_Base_MspInit; /* Legacy weak Base MspInit Callback */
+ /* Legacy weak Base MspInit Callback */
+ htim->Base_MspInitCallback = HAL_TIM_Base_MspInit;
break;
case HAL_TIM_BASE_MSPDEINIT_CB_ID :
- htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit; /* Legacy weak Base Msp DeInit Callback */
+ /* Legacy weak Base Msp DeInit Callback */
+ htim->Base_MspDeInitCallback = HAL_TIM_Base_MspDeInit;
break;
case HAL_TIM_IC_MSPINIT_CB_ID :
- htim->IC_MspInitCallback = HAL_TIM_IC_MspInit; /* Legacy weak IC Msp Init Callback */
+ /* Legacy weak IC Msp Init Callback */
+ htim->IC_MspInitCallback = HAL_TIM_IC_MspInit;
break;
case HAL_TIM_IC_MSPDEINIT_CB_ID :
- htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit; /* Legacy weak IC Msp DeInit Callback */
+ /* Legacy weak IC Msp DeInit Callback */
+ htim->IC_MspDeInitCallback = HAL_TIM_IC_MspDeInit;
break;
case HAL_TIM_OC_MSPINIT_CB_ID :
- htim->OC_MspInitCallback = HAL_TIM_OC_MspInit; /* Legacy weak OC Msp Init Callback */
+ /* Legacy weak OC Msp Init Callback */
+ htim->OC_MspInitCallback = HAL_TIM_OC_MspInit;
break;
case HAL_TIM_OC_MSPDEINIT_CB_ID :
- htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit; /* Legacy weak OC Msp DeInit Callback */
+ /* Legacy weak OC Msp DeInit Callback */
+ htim->OC_MspDeInitCallback = HAL_TIM_OC_MspDeInit;
break;
case HAL_TIM_PWM_MSPINIT_CB_ID :
- htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit; /* Legacy weak PWM Msp Init Callback */
+ /* Legacy weak PWM Msp Init Callback */
+ htim->PWM_MspInitCallback = HAL_TIM_PWM_MspInit;
break;
case HAL_TIM_PWM_MSPDEINIT_CB_ID :
- htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit; /* Legacy weak PWM Msp DeInit Callback */
+ /* Legacy weak PWM Msp DeInit Callback */
+ htim->PWM_MspDeInitCallback = HAL_TIM_PWM_MspDeInit;
break;
case HAL_TIM_ONE_PULSE_MSPINIT_CB_ID :
- htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit; /* Legacy weak One Pulse Msp Init Callback */
+ /* Legacy weak One Pulse Msp Init Callback */
+ htim->OnePulse_MspInitCallback = HAL_TIM_OnePulse_MspInit;
break;
case HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID :
- htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit; /* Legacy weak One Pulse Msp DeInit Callback */
+ /* Legacy weak One Pulse Msp DeInit Callback */
+ htim->OnePulse_MspDeInitCallback = HAL_TIM_OnePulse_MspDeInit;
break;
case HAL_TIM_ENCODER_MSPINIT_CB_ID :
- htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit; /* Legacy weak Encoder Msp Init Callback */
+ /* Legacy weak Encoder Msp Init Callback */
+ htim->Encoder_MspInitCallback = HAL_TIM_Encoder_MspInit;
break;
case HAL_TIM_ENCODER_MSPDEINIT_CB_ID :
- htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit; /* Legacy weak Encoder Msp DeInit Callback */
+ /* Legacy weak Encoder Msp DeInit Callback */
+ htim->Encoder_MspDeInitCallback = HAL_TIM_Encoder_MspDeInit;
break;
case HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID :
- htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit; /* Legacy weak Hall Sensor Msp Init Callback */
+ /* Legacy weak Hall Sensor Msp Init Callback */
+ htim->HallSensor_MspInitCallback = HAL_TIMEx_HallSensor_MspInit;
break;
case HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID :
- htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit; /* Legacy weak Hall Sensor Msp DeInit Callback */
+ /* Legacy weak Hall Sensor Msp DeInit Callback */
+ htim->HallSensor_MspDeInitCallback = HAL_TIMEx_HallSensor_MspDeInit;
break;
default :
@@ -7687,20 +7750,20 @@
void TIM_ResetCallback(TIM_HandleTypeDef *htim)
{
/* Reset the TIM callback to the legacy weak callbacks */
- htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback; /* Legacy weak PeriodElapsedCallback */
- htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback; /* Legacy weak PeriodElapsedHalfCpltCallback */
- htim->TriggerCallback = HAL_TIM_TriggerCallback; /* Legacy weak TriggerCallback */
- htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback; /* Legacy weak TriggerHalfCpltCallback */
- htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback; /* Legacy weak IC_CaptureCallback */
- htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback; /* Legacy weak IC_CaptureHalfCpltCallback */
- htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback; /* Legacy weak OC_DelayElapsedCallback */
- htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback; /* Legacy weak PWM_PulseFinishedCallback */
- htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback; /* Legacy weak PWM_PulseFinishedHalfCpltCallback */
- htim->ErrorCallback = HAL_TIM_ErrorCallback; /* Legacy weak ErrorCallback */
- htim->CommutationCallback = HAL_TIMEx_CommutCallback; /* Legacy weak CommutationCallback */
- htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback; /* Legacy weak CommutationHalfCpltCallback */
- htim->BreakCallback = HAL_TIMEx_BreakCallback; /* Legacy weak BreakCallback */
- htim->Break2Callback = HAL_TIMEx_Break2Callback; /* Legacy weak Break2Callback */
+ htim->PeriodElapsedCallback = HAL_TIM_PeriodElapsedCallback;
+ htim->PeriodElapsedHalfCpltCallback = HAL_TIM_PeriodElapsedHalfCpltCallback;
+ htim->TriggerCallback = HAL_TIM_TriggerCallback;
+ htim->TriggerHalfCpltCallback = HAL_TIM_TriggerHalfCpltCallback;
+ htim->IC_CaptureCallback = HAL_TIM_IC_CaptureCallback;
+ htim->IC_CaptureHalfCpltCallback = HAL_TIM_IC_CaptureHalfCpltCallback;
+ htim->OC_DelayElapsedCallback = HAL_TIM_OC_DelayElapsedCallback;
+ htim->PWM_PulseFinishedCallback = HAL_TIM_PWM_PulseFinishedCallback;
+ htim->PWM_PulseFinishedHalfCpltCallback = HAL_TIM_PWM_PulseFinishedHalfCpltCallback;
+ htim->ErrorCallback = HAL_TIM_ErrorCallback;
+ htim->CommutationCallback = HAL_TIMEx_CommutCallback;
+ htim->CommutationHalfCpltCallback = HAL_TIMEx_CommutHalfCpltCallback;
+ htim->BreakCallback = HAL_TIMEx_BreakCallback;
+ htim->Break2Callback = HAL_TIMEx_Break2Callback;
}
#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
diff --git a/Src/stm32g0xx_hal_tim_ex.c b/Src/stm32g0xx_hal_tim_ex.c
index 11d5258..917ade6 100644
--- a/Src/stm32g0xx_hal_tim_ex.c
+++ b/Src/stm32g0xx_hal_tim_ex.c
@@ -56,10 +56,13 @@
the commutation event).
(#) Activate the TIM peripheral using one of the start functions:
- (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT()
- (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+ (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(),
+ HAL_TIMEx_OCN_Start_IT()
+ (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(),
+ HAL_TIMEx_PWMN_Start_IT()
(++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
- (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+ (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(),
+ HAL_TIMEx_HallSensor_Start_IT().
@endverbatim
******************************************************************************
@@ -348,7 +351,8 @@
TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
/* Enable the Input Capture channel 1
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
/* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
@@ -380,7 +384,8 @@
assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
/* Disable the Input Capture channels 1, 2 and 3
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
/* Disable the Peripheral */
@@ -431,7 +436,8 @@
__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
/* Enable the Input Capture channel 1
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
/* Enable the Peripheral, except in trigger mode where enable is automatically done with trigger */
@@ -463,7 +469,8 @@
assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
/* Disable the Input Capture channel 1
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
/* Disable the capture compare Interrupts event */
@@ -523,7 +530,8 @@
}
/* Enable the Input Capture channel 1
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
/* Set the DMA Input Capture 1 Callbacks */
@@ -570,7 +578,8 @@
assert_param(IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE(htim->Instance));
/* Disable the Input Capture channel 1
- (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
+ (in the Hall Sensor Interface the three possible channels that can be used are TIM_CHANNEL_1,
+ TIM_CHANNEL_2 and TIM_CHANNEL_3) */
TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
@@ -899,7 +908,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -919,7 +929,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -939,7 +950,8 @@
htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1356,7 +1368,8 @@
htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1376,7 +1389,8 @@
htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1396,7 +1410,8 @@
htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAErrorCCxN ;
/* Enable the DMA channel */
- if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3, Length) != HAL_OK)
+ if (HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,
+ Length) != HAL_OK)
{
/* Return error status */
return HAL_ERROR;
@@ -1521,8 +1536,10 @@
/**
* @brief Starts the TIM One Pulse signal generation on the complementary
* output.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be enabled
+ * @param OutputChannel pulse output channel to enable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1531,22 +1548,28 @@
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
{
uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
- HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel);
- HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel);
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
/* Check the parameters */
assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
/* Check the TIM channels state */
- if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY)
- || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
/* Enable the complementary One Pulse output channel and the Input Capture channel */
TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
@@ -1562,8 +1585,10 @@
/**
* @brief Stops the TIM One Pulse signal generation on the complementary
* output.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be disabled
+ * @param OutputChannel pulse output channel to disable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1587,8 +1612,10 @@
__HAL_TIM_DISABLE(htim);
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
/* Return function status */
return HAL_OK;
@@ -1597,8 +1624,10 @@
/**
* @brief Starts the TIM One Pulse signal generation in interrupt mode on the
* complementary channel.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be enabled
+ * @param OutputChannel pulse output channel to enable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1607,22 +1636,28 @@
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
{
uint32_t input_channel = (OutputChannel == TIM_CHANNEL_1) ? TIM_CHANNEL_2 : TIM_CHANNEL_1;
- HAL_TIM_ChannelStateTypeDef input_channel_state = TIM_CHANNEL_STATE_GET(htim, input_channel);
- HAL_TIM_ChannelStateTypeDef output_channel_state = TIM_CHANNEL_N_STATE_GET(htim, OutputChannel);
+ HAL_TIM_ChannelStateTypeDef channel_1_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef channel_2_state = TIM_CHANNEL_STATE_GET(htim, TIM_CHANNEL_2);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_1_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_1);
+ HAL_TIM_ChannelStateTypeDef complementary_channel_2_state = TIM_CHANNEL_N_STATE_GET(htim, TIM_CHANNEL_2);
/* Check the parameters */
assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
/* Check the TIM channels state */
- if ((output_channel_state != HAL_TIM_CHANNEL_STATE_READY)
- || (input_channel_state != HAL_TIM_CHANNEL_STATE_READY))
+ if ((channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (channel_2_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_1_state != HAL_TIM_CHANNEL_STATE_READY)
+ || (complementary_channel_2_state != HAL_TIM_CHANNEL_STATE_READY))
{
return HAL_ERROR;
}
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_BUSY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_BUSY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_BUSY);
/* Enable the TIM Capture/Compare 1 interrupt */
__HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
@@ -1644,8 +1679,10 @@
/**
* @brief Stops the TIM One Pulse signal generation in interrupt mode on the
* complementary channel.
+ * @note OutputChannel must match the pulse output channel chosen when calling
+ * @ref HAL_TIM_OnePulse_ConfigChannel().
* @param htim TIM One Pulse handle
- * @param OutputChannel TIM Channel to be disabled
+ * @param OutputChannel pulse output channel to disable
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1675,8 +1712,10 @@
__HAL_TIM_DISABLE(htim);
/* Set the TIM channels state */
- TIM_CHANNEL_N_STATE_SET(htim, OutputChannel, HAL_TIM_CHANNEL_STATE_READY);
- TIM_CHANNEL_STATE_SET(htim, input_channel, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_1, HAL_TIM_CHANNEL_STATE_READY);
+ TIM_CHANNEL_N_STATE_SET(htim, TIM_CHANNEL_2, HAL_TIM_CHANNEL_STATE_READY);
/* Return function status */
return HAL_OK;
@@ -2443,15 +2482,17 @@
/* Break input BRK is re-armed automatically by hardware. Poll to check whether fault condition disappeared */
/* Init tickstart for timeout management */
tickstart = HAL_GetTick();
- do
+ while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL)
{
- if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != TIM_BDTR_BKDSRM)
+ if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT)
{
- return HAL_OK;
+ /* New check to avoid false timeout detection in case of preemption */
+ if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BKDSRM) != 0UL)
+ {
+ return HAL_TIMEOUT;
+ }
}
- } while ((HAL_GetTick() - tickstart) <= TIM_BREAKINPUT_REARM_TIMEOUT);
-
- return HAL_TIMEOUT;
+ }
}
break;
}
@@ -2464,15 +2505,17 @@
/* Break input BRK2 is re-armed automatically by hardware. Poll to check whether fault condition disappeared */
/* Init tickstart for timeout management */
tickstart = HAL_GetTick();
- do
+ while (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL)
{
- if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != TIM_BDTR_BK2DSRM)
+ if ((HAL_GetTick() - tickstart) > TIM_BREAKINPUT_REARM_TIMEOUT)
{
- return HAL_OK;
+ /* New check to avoid false timeout detection in case of preemption */
+ if (READ_BIT(htim->Instance->BDTR, TIM_BDTR_BK2DSRM) != 0UL)
+ {
+ return HAL_TIMEOUT;
+ }
}
- } while ((HAL_GetTick() - tickstart) <= TIM_BREAKINPUT_REARM_TIMEOUT);
-
- return HAL_TIMEOUT;
+ }
}
break;
}
diff --git a/Src/stm32g0xx_hal_timebase_rtc_alarm_template.c b/Src/stm32g0xx_hal_timebase_rtc_alarm_template.c
index 19f6db7..d1bdadd 100644
--- a/Src/stm32g0xx_hal_timebase_rtc_alarm_template.c
+++ b/Src/stm32g0xx_hal_timebase_rtc_alarm_template.c
@@ -82,7 +82,7 @@
/* HSE Freq as RTCCLK = 8 MHz / 32 = 250 kHz */
#define RTC_ASYNCH_PREDIV 0x07u /* (8 - 1) */
#define RTC_SYNCH_PREDIV 0x7A11u /* (31250 -1) */
-#endif
+#endif /* RTC_CLOCK_SOURCE_LSE */
/* Private macro -------------------------------------------------------------*/
@@ -143,7 +143,7 @@
if ((PeriphClkInitStruct.RTCClockSelection == RCC_RTCCLKSOURCE_HSE_DIV32) && (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != 0x00u))
#else
#error Please select the RTC Clock source
-#endif
+#endif /* RTC_CLOCK_SOURCE_LSE */
{
/* Do nothing */
}
@@ -167,7 +167,7 @@
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV32;
-#endif
+#endif /* RTC_CLOCK_SOURCE_LSE */
/* Configure oscillator */
status = HAL_RCC_OscConfig(&RCC_OscInitStruct);
@@ -254,7 +254,7 @@
/* When RTCCLK is around 32 kHz, need to mask Subsecond register bit 12 to 11
to have 10 Hhz interrupt */
alarm.AlarmSubSecondMask = RTC_ALARMSUBSECONDMASK_SS14_11;
-#endif
+#endif /* RTC_CLOCK_SOURCE_HSE */
}
alarm.AlarmDateWeekDaySel = RTC_ALARMDATEWEEKDAYSEL_DATE;
alarm.AlarmDateWeekDay = RTC_WEEKDAY_MONDAY;
diff --git a/Src/stm32g0xx_hal_timebase_rtc_wakeup_template.c b/Src/stm32g0xx_hal_timebase_rtc_wakeup_template.c
index dab7de2..f70f9c4 100644
--- a/Src/stm32g0xx_hal_timebase_rtc_wakeup_template.c
+++ b/Src/stm32g0xx_hal_timebase_rtc_wakeup_template.c
@@ -80,7 +80,7 @@
/* HSE Freq as RTCCLK = 8 MHz / 32 = 250 kHz */
#define RTC_ASYNCH_PREDIV 0x07u /* (8 - 1) */
#define RTC_SYNCH_PREDIV 0x7A11u /* (31250 -1) */
-#endif
+#endif /* RTC_CLOCK_SOURCE_LSE */
/* Private macro -------------------------------------------------------------*/
@@ -139,7 +139,7 @@
if ((PeriphClkInitStruct.RTCClockSelection == RCC_RTCCLKSOURCE_HSE_DIV32) && (__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != 0x00u))
#else
#error Please select the RTC Clock source
-#endif
+#endif /* RTC_CLOCK_SOURCE_LSE */
{
/* Do nothing */
}
@@ -163,7 +163,7 @@
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_HSE_DIV32;
-#endif
+#endif /* RTC_CLOCK_SOURCE_LSE */
/* COnfigure oscillator */
status = HAL_RCC_OscConfig(&RCC_OscInitStruct);
@@ -208,7 +208,7 @@
#elif defined (RTC_CLOCK_SOURCE_HSE)
/* HSE input clock to RTC is divided by 32 */
wucounter = (HSE_VALUE >> 5);
-#endif
+#endif /* RTC_CLOCK_SOURCE_LSE */
wucounter = ((wucounter >> 1) / (1000U / (uint32_t)uwTickFreq)) -1u;
status = HAL_RTCEx_SetWakeUpTimer_IT(&hRTC_Handle, wucounter, RTC_WAKEUPCLOCK_RTCCLK_DIV2);
diff --git a/Src/stm32g0xx_hal_uart.c b/Src/stm32g0xx_hal_uart.c
index a3a8351..60b366e 100644
--- a/Src/stm32g0xx_hal_uart.c
+++ b/Src/stm32g0xx_hal_uart.c
@@ -177,27 +177,22 @@
/** @defgroup UART_Private_Constants UART Private Constants
* @{
*/
-#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
- USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8| \
- USART_CR1_FIFOEN )) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */
+#define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE | \
+ USART_CR1_OVER8 | USART_CR1_FIFOEN)) /*!< UART or USART CR1 fields of parameters set by UART_SetConfig API */
-#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT| \
- USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */
+#define USART_CR3_FIELDS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT | USART_CR3_TXFTCFG | \
+ USART_CR3_RXFTCFG)) /*!< UART or USART CR3 fields of parameters set by UART_SetConfig API */
#define LPUART_BRR_MIN 0x00000300U /* LPUART BRR minimum authorized value */
#define LPUART_BRR_MAX 0x000FFFFFU /* LPUART BRR maximum authorized value */
#define UART_BRR_MIN 0x10U /* UART BRR minimum authorized value */
#define UART_BRR_MAX 0x0000FFFFU /* UART BRR maximum authorized value */
-
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U};
-
/* Private function prototypes -----------------------------------------------*/
/** @addtogroup UART_Private_Functions
* @{
@@ -227,6 +222,16 @@
* @}
*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup UART_Private_variables
+ * @{
+ */
+const uint16_t UARTPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U};
+/**
+ * @}
+ */
+
+/* Exported Constants --------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup UART_Exported_Functions UART Exported Functions
@@ -1073,7 +1078,8 @@
(+) HAL_UART_AbortTransmitCpltCallback()
(+) HAL_UART_AbortReceiveCpltCallback()
- (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced reception services:
+ (#) A Rx Event Reception Callback (Rx event notification) is available for Non_Blocking modes of enhanced
+ reception services:
(+) HAL_UARTEx_RxEventCallback()
(#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
@@ -1212,8 +1218,8 @@
* RXFNE flag is set. From hardware perspective, RXFNE flag and
* RXNE are mapped on the same bit-field.
* @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
- * (as received data will be handled using u16 pointer cast). Depending on compilation chain,
+ * address of user data buffer for storing data to be received, should be aligned on a half word frontier
+ * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain,
* use of specific alignment compilation directives or pragmas might be required
* to ensure proper alignment for pData.
* @param huart UART handle.
@@ -1371,7 +1377,7 @@
__HAL_UNLOCK(huart);
/* Enable the TX FIFO threshold interrupt */
- SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE);
+ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_TXFTIE);
}
else
{
@@ -1388,7 +1394,7 @@
__HAL_UNLOCK(huart);
/* Enable the Transmit Data Register Empty interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE);
}
return HAL_OK;
@@ -1405,8 +1411,8 @@
* the received data is handled as a set of u16. In this case, Size must indicate the number
* of u16 available through pData.
* @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
- * (as received data will be handled using u16 pointer cast). Depending on compilation chain,
+ * address of user data buffer for storing data to be received, should be aligned on a half word frontier
+ * (16 bits) (as received data will be handled using u16 pointer cast). Depending on compilation chain,
* use of specific alignment compilation directives or pragmas might be required
* to ensure proper alignment for pData.
* @param huart UART handle.
@@ -1440,7 +1446,17 @@
/* Set Reception type to Standard reception */
huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
- return(UART_Start_Receive_IT(huart, pData, Size));
+ if (!(IS_LPUART_INSTANCE(huart->Instance)))
+ {
+ /* Check that USART RTOEN bit is set */
+ if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U)
+ {
+ /* Enable the UART Receiver Timeout Interrupt */
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE);
+ }
+ }
+
+ return (UART_Start_Receive_IT(huart, pData, Size));
}
else
{
@@ -1528,7 +1544,7 @@
/* Enable the DMA transfer for transmit request by setting the DMAT bit
in the UART CR3 register */
- SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
return HAL_OK;
}
@@ -1581,7 +1597,17 @@
/* Set Reception type to Standard reception */
huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
- return(UART_Start_Receive_DMA(huart, pData, Size));
+ if (!(IS_LPUART_INSTANCE(huart->Instance)))
+ {
+ /* Check that USART RTOEN bit is set */
+ if (READ_BIT(huart->Instance->CR2, USART_CR2_RTOEN) != 0U)
+ {
+ /* Enable the UART Receiver Timeout Interrupt */
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RTOIE);
+ }
+ }
+
+ return (UART_Start_Receive_DMA(huart, pData, Size));
}
else
{
@@ -1605,17 +1631,17 @@
(gstate == HAL_UART_STATE_BUSY_TX))
{
/* Disable the UART DMA Tx request */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
}
if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) &&
(rxstate == HAL_UART_STATE_BUSY_RX))
{
/* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
/* Disable the UART DMA Rx request */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
}
__HAL_UNLOCK(huart);
@@ -1635,7 +1661,7 @@
if (huart->gState == HAL_UART_STATE_BUSY_TX)
{
/* Enable the UART DMA Tx request */
- SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAT);
}
if (huart->RxState == HAL_UART_STATE_BUSY_RX)
{
@@ -1643,11 +1669,11 @@
__HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_OREF);
/* Re-enable PE and ERR (Frame error, noise error, overrun error) interrupts */
- SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
- SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
/* Enable the UART DMA Rx request */
- SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
}
__HAL_UNLOCK(huart);
@@ -1676,7 +1702,7 @@
if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT)) &&
(gstate == HAL_UART_STATE_BUSY_TX))
{
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
/* Abort the UART DMA Tx channel */
if (huart->hdmatx != NULL)
@@ -1700,7 +1726,7 @@
if ((HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR)) &&
(rxstate == HAL_UART_STATE_BUSY_RX))
{
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
/* Abort the UART DMA Rx channel */
if (huart->hdmarx != NULL)
@@ -1738,20 +1764,20 @@
HAL_StatusTypeDef HAL_UART_Abort(UART_HandleTypeDef *huart)
{
/* Disable TXE, TC, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE |
- USART_CR1_TCIE));
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE |
+ USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE);
/* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
}
/* Disable the UART DMA Tx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT))
{
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
/* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */
if (huart->hdmatx != NULL)
@@ -1776,7 +1802,7 @@
/* Disable the UART DMA Rx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
{
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
/* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */
if (huart->hdmarx != NULL)
@@ -1839,13 +1865,13 @@
HAL_StatusTypeDef HAL_UART_AbortTransmit(UART_HandleTypeDef *huart)
{
/* Disable TCIE, TXEIE and TXFTIE interrupts */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE));
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE);
/* Disable the UART DMA Tx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT))
{
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
/* Abort the UART DMA Tx channel : use blocking DMA Abort API (no callback) */
if (huart->hdmatx != NULL)
@@ -1897,19 +1923,19 @@
HAL_StatusTypeDef HAL_UART_AbortReceive(UART_HandleTypeDef *huart)
{
/* Disable PEIE, EIE, RXNEIE and RXFTIE interrupts */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE));
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE | USART_CR3_RXFTIE);
/* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
}
/* Disable the UART DMA Rx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
{
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
/* Abort the UART DMA Rx channel : use blocking DMA Abort API (no callback) */
if (huart->hdmarx != NULL)
@@ -1966,14 +1992,14 @@
uint32_t abortcplt = 1U;
/* Disable interrupts */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE |
- USART_CR1_TXEIE_TXFNFIE));
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_TCIE | USART_CR1_RXNEIE_RXFNEIE |
+ USART_CR1_TXEIE_TXFNFIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE));
/* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
}
/* If DMA Tx and/or DMA Rx Handles are associated to UART Handle, DMA Abort complete callbacks should be initialised
@@ -2011,7 +2037,7 @@
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT))
{
/* Disable DMA Tx at UART level */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
/* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */
if (huart->hdmatx != NULL)
@@ -2034,7 +2060,7 @@
/* Disable the UART DMA Rx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
{
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
/* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */
if (huart->hdmarx != NULL)
@@ -2116,13 +2142,13 @@
HAL_StatusTypeDef HAL_UART_AbortTransmit_IT(UART_HandleTypeDef *huart)
{
/* Disable interrupts */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE));
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TCIE | USART_CR1_TXEIE_TXFNFIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE);
/* Disable the UART DMA Tx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAT))
{
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
/* Abort the UART DMA Tx channel : use non blocking DMA Abort API (callback) */
if (huart->hdmatx != NULL)
@@ -2206,19 +2232,19 @@
HAL_StatusTypeDef HAL_UART_AbortReceive_IT(UART_HandleTypeDef *huart)
{
/* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE));
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
/* If Reception till IDLE event was ongoing, disable IDLEIE interrupt */
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_IDLEIE));
}
/* Disable the UART DMA Rx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
{
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
/* Abort the UART DMA Rx channel : use non blocking DMA Abort API (callback) */
if (huart->hdmarx != NULL)
@@ -2399,7 +2425,7 @@
/* Disable the UART DMA Rx request if enabled */
if (HAL_IS_BIT_SET(huart->Instance->CR3, USART_CR3_DMAR))
{
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
/* Abort the UART DMA Rx channel */
if (huart->hdmarx != NULL)
@@ -2460,9 +2486,9 @@
/* Check current reception Mode :
If Reception till IDLE event has been selected : */
- if ( (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
- &&((isrflags & USART_ISR_IDLE) != 0U)
- &&((cr1its & USART_ISR_IDLE) != 0U))
+ if ((huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
+ && ((isrflags & USART_ISR_IDLE) != 0U)
+ && ((cr1its & USART_ISR_IDLE) != 0U))
{
__HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
@@ -2474,8 +2500,8 @@
(DMA cplt callback will be called).
Otherwise, if at least one data has already been received, IDLE event is to be notified to user */
uint16_t nb_remaining_rx_data = (uint16_t) __HAL_DMA_GET_COUNTER(huart->hdmarx);
- if ( (nb_remaining_rx_data > 0U)
- &&(nb_remaining_rx_data < huart->RxXferSize))
+ if ((nb_remaining_rx_data > 0U)
+ && (nb_remaining_rx_data < huart->RxXferSize))
{
/* Reception is not complete */
huart->RxXferCount = nb_remaining_rx_data;
@@ -2484,18 +2510,18 @@
if (HAL_IS_BIT_CLR(huart->hdmarx->Instance->CCR, DMA_CCR_CIRC))
{
/* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
/* Disable the DMA transfer for the receiver request by resetting the DMAR bit
in the UART CR3 register */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
/* At end of Rx process, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
/* Last bytes received, so no need as the abort is immediate */
(void)HAL_DMA_Abort(huart->hdmarx);
@@ -2506,7 +2532,7 @@
#else
/*Call legacy weak Rx Event callback*/
HAL_UARTEx_RxEventCallback(huart, (huart->RxXferSize - huart->RxXferCount));
-#endif
+#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */
}
return;
}
@@ -2516,14 +2542,14 @@
/* Check received length : If all expected data are received, do nothing.
Otherwise, if at least one data has already been received, IDLE event is to be notified to user */
uint16_t nb_rx_data = huart->RxXferSize - huart->RxXferCount;
- if ( (huart->RxXferCount > 0U)
- &&(nb_rx_data > 0U) )
+ if ((huart->RxXferCount > 0U)
+ && (nb_rx_data > 0U))
{
/* Disable the UART Parity Error Interrupt and RXNE interrupts */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE));
- /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
+ /* Disable the UART Error Interrupt:(Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
/* Rx process is completed, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
@@ -2532,14 +2558,14 @@
/* Clear RxISR function pointer */
huart->RxISR = NULL;
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
/*Call registered Rx complete callback*/
huart->RxEventCallback(huart, nb_rx_data);
#else
/*Call legacy weak Rx Event callback*/
HAL_UARTEx_RxEventCallback(huart, nb_rx_data);
-#endif
+#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */
}
return;
}
@@ -2882,7 +2908,7 @@
huart->gState = HAL_UART_STATE_BUSY;
/* Enable USART mute mode by setting the MME bit in the CR1 register */
- SET_BIT(huart->Instance->CR1, USART_CR1_MME);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_MME);
huart->gState = HAL_UART_STATE_READY;
@@ -2902,7 +2928,7 @@
huart->gState = HAL_UART_STATE_BUSY;
/* Disable USART mute mode by clearing the MME bit in the CR1 register */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_MME);
huart->gState = HAL_UART_STATE_READY;
@@ -2931,10 +2957,10 @@
huart->gState = HAL_UART_STATE_BUSY;
/* Clear TE and RE bits */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
/* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */
- SET_BIT(huart->Instance->CR1, USART_CR1_TE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TE);
huart->gState = HAL_UART_STATE_READY;
@@ -2954,10 +2980,10 @@
huart->gState = HAL_UART_STATE_BUSY;
/* Clear TE and RE bits */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
/* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */
- SET_BIT(huart->Instance->CR1, USART_CR1_RE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RE);
huart->gState = HAL_UART_STATE_READY;
@@ -3116,7 +3142,6 @@
* set TE and RE bits according to huart->Init.Mode value
* set OVER8 bit according to huart->Init.OverSampling value */
tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ;
- tmpreg |= (uint32_t)huart->FifoMode;
MODIFY_REG(huart->Instance->CR1, USART_CR1_FIELDS, tmpreg);
/*-------------------------- USART CR2 Configuration -----------------------*/
@@ -3429,8 +3454,9 @@
{
/* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error)
interrupts for the interrupt process */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE));
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE |
+ USART_CR1_TXEIE_TXFNFIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
huart->gState = HAL_UART_STATE_READY;
huart->RxState = HAL_UART_STATE_READY;
@@ -3449,8 +3475,9 @@
/* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error)
interrupts for the interrupt process */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE));
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE |
+ USART_CR1_TXEIE_TXFNFIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
huart->gState = HAL_UART_STATE_READY;
huart->RxState = HAL_UART_STATE_READY;
@@ -3492,7 +3519,7 @@
huart->RxState = HAL_UART_STATE_BUSY_RX;
/* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
/* Configure Rx interrupt processing */
if ((huart->FifoMode == UART_FIFOMODE_ENABLE) && (Size >= huart->NbRxDataToProcess))
@@ -3510,8 +3537,8 @@
__HAL_UNLOCK(huart);
/* Enable the UART Parity Error interrupt and RX FIFO Threshold interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
- SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_RXFTIE);
}
else
{
@@ -3528,7 +3555,7 @@
__HAL_UNLOCK(huart);
/* Enable the UART Parity Error interrupt and Data Register Not Empty interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE);
}
return HAL_OK;
}
@@ -3574,8 +3601,8 @@
__HAL_UNLOCK(huart);
- /* Restore huart->gState to ready */
- huart->gState = HAL_UART_STATE_READY;
+ /* Restore huart->RxState to ready */
+ huart->RxState = HAL_UART_STATE_READY;
return HAL_ERROR;
}
@@ -3583,14 +3610,14 @@
__HAL_UNLOCK(huart);
/* Enable the UART Parity Error Interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_PEIE);
/* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_EIE);
/* Enable the DMA transfer for the receiver request by setting the DMAR bit
in the UART CR3 register */
- SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ ATOMIC_SET_BIT(huart->Instance->CR3, USART_CR3_DMAR);
return HAL_OK;
}
@@ -3604,8 +3631,8 @@
static void UART_EndTxTransfer(UART_HandleTypeDef *huart)
{
/* Disable TXEIE, TCIE, TXFT interrupts */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE));
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_TXFTIE));
/* At end of Tx process, restore huart->gState to Ready */
huart->gState = HAL_UART_STATE_READY;
@@ -3620,13 +3647,13 @@
static void UART_EndRxTransfer(UART_HandleTypeDef *huart)
{
/* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE));
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
/* In case of reception waiting for IDLE event, disable also the IDLE IE interrupt source */
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
}
/* At end of Rx process, restore huart->RxState to Ready */
@@ -3654,10 +3681,10 @@
/* Disable the DMA transfer for transmit request by resetting the DMAT bit
in the UART CR3 register */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT);
/* Enable the UART Transmit Complete Interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
}
/* DMA Circular mode */
else
@@ -3705,12 +3732,12 @@
huart->RxXferCount = 0U;
/* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
/* Disable the DMA transfer for the receiver request by resetting the DMAR bit
in the UART CR3 register */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR);
/* At end of Rx process, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
@@ -3718,7 +3745,7 @@
/* If Reception till IDLE event has been selected, Disable IDLE Interrupt */
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
}
}
@@ -3762,10 +3789,10 @@
{
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
/*Call registered Rx Event callback*/
- huart->RxEventCallback(huart, huart->RxXferSize/2U);
+ huart->RxEventCallback(huart, huart->RxXferSize / 2U);
#else
/*Call legacy weak Rx Event callback*/
- HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize/2U);
+ HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize / 2U);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
}
else
@@ -4030,10 +4057,10 @@
if (huart->TxXferCount == 0U)
{
/* Disable the UART Transmit Data Register Empty Interrupt */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE);
/* Enable the UART Transmit Complete Interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
}
else
{
@@ -4061,10 +4088,10 @@
if (huart->TxXferCount == 0U)
{
/* Disable the UART Transmit Data Register Empty Interrupt */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TXEIE_TXFNFIE);
/* Enable the UART Transmit Complete Interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
}
else
{
@@ -4095,10 +4122,10 @@
if (huart->TxXferCount == 0U)
{
/* Disable the TX FIFO threshold interrupt */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE);
/* Enable the UART Transmit Complete Interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
break; /* force exit loop */
}
@@ -4136,10 +4163,10 @@
if (huart->TxXferCount == 0U)
{
/* Disable the TX FIFO threshold interrupt */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_TXFTIE);
/* Enable the UART Transmit Complete Interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_TCIE);
break; /* force exit loop */
}
@@ -4167,7 +4194,7 @@
static void UART_EndTransmit_IT(UART_HandleTypeDef *huart)
{
/* Disable the UART Transmit Complete Interrupt */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_TCIE);
/* Tx process is ended, restore huart->gState to Ready */
huart->gState = HAL_UART_STATE_READY;
@@ -4205,10 +4232,10 @@
if (huart->RxXferCount == 0U)
{
/* Disable the UART Parity Error Interrupt and RXNE interrupts */
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE));
/* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
/* Rx process is completed, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
@@ -4220,16 +4247,24 @@
If Reception till IDLE event has been selected : */
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
- /* Disable IDLE interrupt */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ /* Set reception type to Standard */
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
+ /* Disable IDLE interrupt */
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET)
+ {
+ /* Clear IDLE Flag */
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
+ }
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
/*Call registered Rx Event callback*/
huart->RxEventCallback(huart, huart->RxXferSize);
#else
/*Call legacy weak Rx Event callback*/
HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize);
-#endif
+#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */
}
else
{
@@ -4242,7 +4277,6 @@
HAL_UART_RxCpltCallback(huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
}
- huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
}
}
else
@@ -4277,10 +4311,10 @@
if (huart->RxXferCount == 0U)
{
/* Disable the UART Parity Error Interrupt and RXNE interrupt*/
- CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE));
/* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_EIE);
/* Rx process is completed, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
@@ -4292,16 +4326,24 @@
If Reception till IDLE event has been selected : */
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
- /* Disable IDLE interrupt */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ /* Set reception type to Standard */
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
+ /* Disable IDLE interrupt */
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET)
+ {
+ /* Clear IDLE Flag */
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
+ }
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
/*Call registered Rx Event callback*/
huart->RxEventCallback(huart, huart->RxXferSize);
#else
/*Call legacy weak Rx Event callback*/
HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize);
-#endif
+#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */
}
else
{
@@ -4314,7 +4356,6 @@
HAL_UART_RxCpltCallback(huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
}
- huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
}
}
else
@@ -4399,11 +4440,11 @@
if (huart->RxXferCount == 0U)
{
/* Disable the UART Parity Error Interrupt and RXFT interrupt*/
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
/* Disable the UART Error Interrupt: (Frame error, noise error, overrun error)
and RX FIFO Threshold interrupt */
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
/* Rx process is completed, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
@@ -4415,16 +4456,24 @@
If Reception till IDLE event has been selected : */
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
- /* Disable IDLE interrupt */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ /* Set reception type to Standard */
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
+ /* Disable IDLE interrupt */
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET)
+ {
+ /* Clear IDLE Flag */
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
+ }
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
/*Call registered Rx Event callback*/
huart->RxEventCallback(huart, huart->RxXferSize);
#else
/*Call legacy weak Rx Event callback*/
HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize);
-#endif
+#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */
}
else
{
@@ -4437,7 +4486,6 @@
HAL_UART_RxCpltCallback(huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
}
- huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
}
}
@@ -4449,13 +4497,13 @@
if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess))
{
/* Disable the UART RXFT interrupt*/
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE);
/* Update the RxISR function pointer */
huart->RxISR = UART_RxISR_8BIT;
/* Enable the UART Data Register Not Empty interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE);
}
}
else
@@ -4542,11 +4590,11 @@
if (huart->RxXferCount == 0U)
{
/* Disable the UART Parity Error Interrupt and RXFT interrupt*/
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_PEIE);
/* Disable the UART Error Interrupt: (Frame error, noise error, overrun error)
and RX FIFO Threshold interrupt */
- CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
/* Rx process is completed, restore huart->RxState to Ready */
huart->RxState = HAL_UART_STATE_READY;
@@ -4558,16 +4606,24 @@
If Reception till IDLE event has been selected : */
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
- /* Disable IDLE interrupt */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ /* Set reception type to Standard */
+ huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
+ /* Disable IDLE interrupt */
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+
+ if (__HAL_UART_GET_FLAG(huart, UART_FLAG_IDLE) == SET)
+ {
+ /* Clear IDLE Flag */
+ __HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
+ }
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
/*Call registered Rx Event callback*/
huart->RxEventCallback(huart, huart->RxXferSize);
#else
/*Call legacy weak Rx Event callback*/
HAL_UARTEx_RxEventCallback(huart, huart->RxXferSize);
-#endif
+#endif /* (USE_HAL_UART_REGISTER_CALLBACKS) */
}
else
{
@@ -4580,7 +4636,6 @@
HAL_UART_RxCpltCallback(huart);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
}
- huart->ReceptionType = HAL_UART_RECEPTION_STANDARD;
}
}
@@ -4592,13 +4647,13 @@
if ((rxdatacount != 0U) && (rxdatacount < huart->NbRxDataToProcess))
{
/* Disable the UART RXFT interrupt*/
- CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR3, USART_CR3_RXFTIE);
/* Update the RxISR function pointer */
huart->RxISR = UART_RxISR_16BIT;
/* Enable the UART Data Register Not Empty interrupt */
- SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE);
}
}
else
diff --git a/Src/stm32g0xx_hal_uart_ex.c b/Src/stm32g0xx_hal_uart_ex.c
index 1164ba8..4e17a68 100644
--- a/Src/stm32g0xx_hal_uart_ex.c
+++ b/Src/stm32g0xx_hal_uart_ex.c
@@ -483,7 +483,7 @@
__HAL_LOCK(huart);
/* Set UESM bit */
- SET_BIT(huart->Instance->CR1, USART_CR1_UESM);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_UESM);
/* Process Unlocked */
__HAL_UNLOCK(huart);
@@ -502,7 +502,7 @@
__HAL_LOCK(huart);
/* Clear UESM bit */
- CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM);
+ ATOMIC_CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM);
/* Process Unlocked */
__HAL_UNLOCK(huart);
@@ -688,29 +688,33 @@
}
/**
- * @brief Receive an amount of data in blocking mode till either the expected number of data is received or an IDLE event occurs.
- * @note HAL_OK is returned if reception is completed (expected number of data has been received)
- * or if reception is stopped after IDLE event (less than the expected number of data has been received)
- * In this case, RxLen output parameter indicates number of data available in reception buffer.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
- * of uint16_t available through pData.
+ * @brief Receive an amount of data in blocking mode till either the expected number of data
+ * is received or an IDLE event occurs.
+ * @note HAL_OK is returned if reception is completed (expected number of data has been received)
+ * or if reception is stopped after IDLE event (less than the expected number of data has been received)
+ * In this case, RxLen output parameter indicates number of data available in reception buffer.
+ * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+ * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
+ * of uint16_t available through pData.
* @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO
* is not empty. Read operations from the RDR register are performed when
* RXFNE flag is set. From hardware perspective, RXFNE flag and
* RXNE are mapped on the same bit-field.
* @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
- * (as received data will be handled using uint16_t pointer cast). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData.
+ * address of user data buffer for storing data to be received, should be aligned on a half word frontier
+ * (16 bits) (as received data will be handled using uint16_t pointer cast). Depending on compilation chain,
+ * use of specific alignment compilation directives or pragmas might be required to ensure proper
+ * alignment for pData.
* @param huart UART handle.
* @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
* @param Size Amount of data elements (uint8_t or uint16_t) to be received.
- * @param RxLen Number of data elements finally received (could be lower than Size, in case reception ends on IDLE event)
+ * @param RxLen Number of data elements finally received
+ * (could be lower than Size, in case reception ends on IDLE event)
* @param Timeout Timeout duration expressed in ms (covers the whole reception sequence).
* @retval HAL status
*/
-HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen, uint32_t Timeout)
+HAL_StatusTypeDef HAL_UARTEx_ReceiveToIdle(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint16_t *RxLen,
+ uint32_t Timeout)
{
uint8_t *pdata8bits;
uint16_t *pdata16bits;
@@ -832,17 +836,19 @@
}
/**
- * @brief Receive an amount of data in interrupt mode till either the expected number of data is received or an IDLE event occurs.
- * @note Reception is initiated by this function call. Further progress of reception is achieved thanks
- * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating
- * number of received data elements.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
- * of uint16_t available through pData.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
- * (as received data will be handled using uint16_t pointer cast). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData.
+ * @brief Receive an amount of data in interrupt mode till either the expected number of data
+ * is received or an IDLE event occurs.
+ * @note Reception is initiated by this function call. Further progress of reception is achieved thanks
+ * to UART interrupts raised by RXNE and IDLE events. Callback is called at end of reception indicating
+ * number of received data elements.
+ * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+ * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
+ * of uint16_t available through pData.
+ * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+ * address of user data buffer for storing data to be received, should be aligned on a half word frontier
+ * (16 bits) (as received data will be handled using uint16_t pointer cast). Depending on compilation chain,
+ * use of specific alignment compilation directives or pragmas might be required
+ * to ensure proper alignment for pData.
* @param huart UART handle.
* @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
* @param Size Amount of data elements (uint8_t or uint16_t) to be received.
@@ -884,7 +890,7 @@
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
__HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
- SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
}
else
{
@@ -905,20 +911,22 @@
}
/**
- * @brief Receive an amount of data in DMA mode till either the expected number of data is received or an IDLE event occurs.
- * @note Reception is initiated by this function call. Further progress of reception is achieved thanks
- * to DMA services, transferring automatically received data elements in user reception buffer and
- * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider
- * reception phase as ended. In all cases, callback execution will indicate number of received data elements.
- * @note When the UART parity is enabled (PCE = 1), the received data contain
- * the parity bit (MSB position).
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
- * of uint16_t available through pData.
- * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
- * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pData.
+ * @brief Receive an amount of data in DMA mode till either the expected number
+ * of data is received or an IDLE event occurs.
+ * @note Reception is initiated by this function call. Further progress of reception is achieved thanks
+ * to DMA services, transferring automatically received data elements in user reception buffer and
+ * calling registered callbacks at half/end of reception. UART IDLE events are also used to consider
+ * reception phase as ended. In all cases, callback execution will indicate number of received data elements.
+ * @note When the UART parity is enabled (PCE = 1), the received data contain
+ * the parity bit (MSB position).
+ * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+ * the received data is handled as a set of uint16_t. In this case, Size must indicate the number
+ * of uint16_t available through pData.
+ * @note When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
+ * address of user data buffer for storing data to be received, should be aligned on a half word frontier
+ * (16 bits) (as received data will be handled by DMA from halfword frontier). Depending on compilation chain,
+ * use of specific alignment compilation directives or pragmas might be required
+ * to ensure proper alignment for pData.
* @param huart UART handle.
* @param pData Pointer to data buffer (uint8_t or uint16_t data elements).
* @param Size Amount of data elements (uint8_t or uint16_t) to be received.
@@ -960,7 +968,7 @@
if (huart->ReceptionType == HAL_UART_RECEPTION_TOIDLE)
{
__HAL_UART_CLEAR_FLAG(huart, UART_CLEAR_IDLEF);
- SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
+ ATOMIC_SET_BIT(huart->Instance->CR1, USART_CR1_IDLEIE);
}
else
{
@@ -1022,8 +1030,8 @@
uint8_t tx_fifo_depth;
uint8_t rx_fifo_threshold;
uint8_t tx_fifo_threshold;
- uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
- uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
+ static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
+ static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
if (huart->FifoMode == UART_FIFOMODE_DISABLE)
{
diff --git a/Src/stm32g0xx_hal_usart.c b/Src/stm32g0xx_hal_usart.c
index 37d9ef2..5f2d544 100644
--- a/Src/stm32g0xx_hal_usart.c
+++ b/Src/stm32g0xx_hal_usart.c
@@ -39,7 +39,8 @@
(+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
(+++) Configure the DMA Tx/Rx channel.
(+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.
+ (+++) Configure the priority and enable the NVIC for the transfer
+ complete interrupt on the DMA Tx/Rx channel.
(#) Program the Baud Rate, Word Length, Stop Bit, Parity, and Mode
(Receiver/Transmitter) in the husart handle Init structure.
@@ -317,7 +318,8 @@
/* In Synchronous mode, the following bits must be kept cleared:
- LINEN bit in the USART_CR2 register
- - HDSEL, SCEN and IREN bits in the USART_CR3 register.*/
+ - HDSEL, SCEN and IREN bits in the USART_CR3 register.
+ */
husart->Instance->CR2 &= ~USART_CR2_LINEN;
husart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
@@ -532,7 +534,7 @@
/**
* @brief Unregister an USART Callback
- * USART callback is redirected to the weak predefined callback
+ * USART callaback is redirected to the weak predefined callback
* @param husart usart handle
* @param CallbackID ID of the callback to be unregistered
* This parameter can be one of the following values:
@@ -561,47 +563,47 @@
switch (CallbackID)
{
case HAL_USART_TX_HALFCOMPLETE_CB_ID :
- husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */
+ husart->TxHalfCpltCallback = HAL_USART_TxHalfCpltCallback; /* Legacy weak TxHalfCpltCallback */
break;
case HAL_USART_TX_COMPLETE_CB_ID :
- husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */
+ husart->TxCpltCallback = HAL_USART_TxCpltCallback; /* Legacy weak TxCpltCallback */
break;
case HAL_USART_RX_HALFCOMPLETE_CB_ID :
- husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
+ husart->RxHalfCpltCallback = HAL_USART_RxHalfCpltCallback; /* Legacy weak RxHalfCpltCallback */
break;
case HAL_USART_RX_COMPLETE_CB_ID :
- husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */
+ husart->RxCpltCallback = HAL_USART_RxCpltCallback; /* Legacy weak RxCpltCallback */
break;
case HAL_USART_TX_RX_COMPLETE_CB_ID :
- husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */
+ husart->TxRxCpltCallback = HAL_USART_TxRxCpltCallback; /* Legacy weak TxRxCpltCallback */
break;
case HAL_USART_ERROR_CB_ID :
- husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */
+ husart->ErrorCallback = HAL_USART_ErrorCallback; /* Legacy weak ErrorCallback */
break;
case HAL_USART_ABORT_COMPLETE_CB_ID :
- husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
+ husart->AbortCpltCallback = HAL_USART_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
break;
case HAL_USART_RX_FIFO_FULL_CB_ID :
- husart->RxFifoFullCallback = HAL_USARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */
+ husart->RxFifoFullCallback = HAL_USARTEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */
break;
case HAL_USART_TX_FIFO_EMPTY_CB_ID :
- husart->TxFifoEmptyCallback = HAL_USARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */
+ husart->TxFifoEmptyCallback = HAL_USARTEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */
break;
case HAL_USART_MSPINIT_CB_ID :
- husart->MspInitCallback = HAL_USART_MspInit; /* Legacy weak MspInitCallback */
+ husart->MspInitCallback = HAL_USART_MspInit; /* Legacy weak MspInitCallback */
break;
case HAL_USART_MSPDEINIT_CB_ID :
- husart->MspDeInitCallback = HAL_USART_MspDeInit; /* Legacy weak MspDeInitCallback */
+ husart->MspDeInitCallback = HAL_USART_MspDeInit; /* Legacy weak MspDeInitCallback */
break;
default :
@@ -720,13 +722,16 @@
(#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
Errors are handled as follows :
(++) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is
- to be evaluated by user : this concerns Frame Error, Parity Error or Noise Error in Interrupt mode reception .
- Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify error type,
- and HAL_USART_ErrorCallback() user callback is executed. Transfer is kept ongoing on USART side.
+ to be evaluated by user : this concerns Frame Error,
+ Parity Error or Noise Error in Interrupt mode reception .
+ Received character is then retrieved and stored in Rx buffer, Error code is set to allow user to identify
+ error type, and HAL_USART_ErrorCallback() user callback is executed.
+ Transfer is kept ongoing on USART side.
If user wants to abort it, Abort services should be called by user.
(++) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
This concerns Overrun Error In Interrupt mode reception and all errors in DMA mode.
- Error code is set to allow user to identify error type, and HAL_USART_ErrorCallback() user callback is executed.
+ Error code is set to allow user to identify error type,
+ and HAL_USART_ErrorCallback() user callback is executed.
@endverbatim
* @{
@@ -740,7 +745,8 @@
* @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
* address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits)
* (as sent data will be handled using u16 pointer cast). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData.
+ * use of specific alignment compilation directives or pragmas might be required
+ * to ensure proper alignment for pTxData.
* @param husart USART handle.
* @param pTxData Pointer to data buffer (u8 or u16 data elements).
* @param Size Amount of data elements (u8 or u16) to be sent.
@@ -1472,7 +1478,8 @@
* @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
* address of user data buffer containing data to be sent, should be aligned on a half word frontier (16 bits)
* (as sent data will be handled by DMA from halfword frontier). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData.
+ * use of specific alignment compilation directives or pragmas might be required
+ * to ensure proper alignment for pTxData.
* @param husart USART handle.
* @param pTxData pointer to data buffer (u8 or u16 data elements).
* @param Size amount of data elements (u8 or u16) to be sent.
@@ -1570,9 +1577,10 @@
* the received data is handled as a set of u16. In this case, Size must indicate the number
* of u16 available through pRxData.
* @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffer for storing data to be received, should be aligned on a half word frontier (16 bits)
- * (as received data will be handled by DMA from halfword frontier). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pRxData.
+ * address of user data buffer for storing data to be received, should be aligned on
+ * a half word frontier (16 bits) (as received data will be handled by DMA from halfword frontier).
+ * Depending on compilation chain, use of specific alignment compilation directives or pragmas
+ * might be required to ensure proper alignment for pRxData.
* @param husart USART handle.
* @param pRxData pointer to data buffer (u8 or u16 data elements).
* @param Size amount of data elements (u8 or u16) to be received.
@@ -1701,9 +1709,10 @@
* the sent data and the received data are handled as sets of u16. In this case, Size must indicate the number
* of u16 available through pTxData and through pRxData.
* @note When USART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01),
- * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier (16 bits)
- * (as sent/received data will be handled by DMA from halfword frontier). Depending on compilation chain,
- * use of specific alignment compilation directives or pragmas might be required to ensure proper alignment for pTxData and pRxData.
+ * address of user data buffers containing data to be sent/received, should be aligned on a half word frontier
+ * (16 bits) (as sent/received data will be handled by DMA from halfword frontier). Depending on compilation
+ * chain, use of specific alignment compilation directives or pragmas might be required
+ * to ensure proper alignment for pTxData and pRxData.
* @param husart USART handle.
* @param pTxData pointer to TX data buffer (u8 or u16 data elements).
* @param pRxData pointer to RX data buffer (u8 or u16 data elements).
@@ -2226,7 +2235,8 @@
uint32_t errorcode;
/* If no error occurs */
- errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_UDR));
+ errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF |
+ USART_ISR_UDR));
if (errorflags == 0U)
{
/* USART in mode Receiver ---------------------------------------------------*/
@@ -2281,6 +2291,14 @@
husart->ErrorCode |= HAL_USART_ERROR_ORE;
}
+ /* USART Receiver Timeout interrupt occurred ---------------------------------*/
+ if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U))
+ {
+ __HAL_USART_CLEAR_IT(husart, USART_CLEAR_RTOF);
+
+ husart->ErrorCode |= HAL_USART_ERROR_RTO;
+ }
+
/* USART SPI slave underrun error interrupt occurred -------------------------*/
if (((isrflags & USART_ISR_UDR) != 0U) && ((cr3its & USART_CR3_EIE) != 0U))
{
@@ -3032,7 +3050,7 @@
usartdiv = (uint32_t)(USART_DIV_SAMPLING8(pclk, husart->Init.BaudRate, husart->Init.ClockPrescaler));
break;
case USART_CLOCKSOURCE_LSE:
- usartdiv = (uint32_t)(USART_DIV_SAMPLING8((uint32_t)LSE_VALUE, husart->Init.BaudRate, husart->Init.ClockPrescaler));
+ usartdiv = (uint32_t)(USART_DIV_SAMPLING8(LSE_VALUE, husart->Init.BaudRate, husart->Init.ClockPrescaler));
break;
default:
ret = HAL_ERROR;
@@ -3543,7 +3561,8 @@
/* Disable the USART Parity Error Interrupt */
CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
- /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error)
+ and RX FIFO Threshold interrupt */
CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
/* Clear RxISR function pointer */
@@ -3677,7 +3696,8 @@
/* Disable the USART Parity Error Interrupt */
CLEAR_BIT(husart->Instance->CR1, USART_CR1_PEIE);
- /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) and RX FIFO Threshold interrupt */
+ /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error)
+ and RX FIFO Threshold interrupt */
CLEAR_BIT(husart->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
/* Clear RxISR function pointer */
diff --git a/Src/stm32g0xx_hal_usart_ex.c b/Src/stm32g0xx_hal_usart_ex.c
index 1026b31..cfba02b 100644
--- a/Src/stm32g0xx_hal_usart_ex.c
+++ b/Src/stm32g0xx_hal_usart_ex.c
@@ -57,10 +57,10 @@
/** @defgroup USARTEx_Private_Constants USARTEx Private Constants
* @{
*/
-/* UART RX FIFO depth */
+/* USART RX FIFO depth */
#define RX_FIFO_DEPTH 8U
-/* UART TX FIFO depth */
+/* USART TX FIFO depth */
#define TX_FIFO_DEPTH 8U
/**
* @}
@@ -503,8 +503,8 @@
uint8_t rx_fifo_threshold;
uint8_t tx_fifo_threshold;
/* 2 0U/1U added for MISRAC2012-Rule-18.1_b and MISRAC2012-Rule-18.1_d */
- uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
- uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
+ static const uint8_t numerator[] = {1U, 1U, 1U, 3U, 7U, 1U, 0U, 0U};
+ static const uint8_t denominator[] = {8U, 4U, 2U, 4U, 8U, 1U, 1U, 1U};
if (husart->FifoMode == USART_FIFOMODE_DISABLE)
{
@@ -515,10 +515,14 @@
{
rx_fifo_depth = RX_FIFO_DEPTH;
tx_fifo_depth = TX_FIFO_DEPTH;
- rx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3, USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos) & 0xFFU);
- tx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3, USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos) & 0xFFU);
- husart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) / (uint16_t)denominator[tx_fifo_threshold];
- husart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) / (uint16_t)denominator[rx_fifo_threshold];
+ rx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3,
+ USART_CR3_RXFTCFG) >> USART_CR3_RXFTCFG_Pos) & 0xFFU);
+ tx_fifo_threshold = (uint8_t)((READ_BIT(husart->Instance->CR3,
+ USART_CR3_TXFTCFG) >> USART_CR3_TXFTCFG_Pos) & 0xFFU);
+ husart->NbTxDataToProcess = ((uint16_t)tx_fifo_depth * numerator[tx_fifo_threshold]) /
+ (uint16_t)denominator[tx_fifo_threshold];
+ husart->NbRxDataToProcess = ((uint16_t)rx_fifo_depth * numerator[rx_fifo_threshold]) /
+ (uint16_t)denominator[rx_fifo_threshold];
}
}
/**
diff --git a/Src/stm32g0xx_ll_adc.c b/Src/stm32g0xx_ll_adc.c
index 2de209f..3b61218 100644
--- a/Src/stm32g0xx_ll_adc.c
+++ b/Src/stm32g0xx_ll_adc.c
@@ -26,7 +26,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
@@ -172,7 +172,7 @@
|| ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \
|| ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \
)
-#endif
+#endif /* TIM15 && TIM6 && TIM2 */
#define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__) \
(((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE) \
@@ -262,18 +262,18 @@
* must be disabled.
* @param ADCxy_COMMON ADC common instance
* (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() )
- * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
+ * @param pADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
* @retval An ErrorStatus enumeration value:
* - SUCCESS: ADC common registers are initialized
* - ERROR: ADC common registers are not initialized
*/
-ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
+ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct)
{
ErrorStatus status = SUCCESS;
/* Check the parameters */
assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON));
- assert_param(IS_LL_ADC_COMMON_CLOCK(ADC_CommonInitStruct->CommonClock));
+ assert_param(IS_LL_ADC_COMMON_CLOCK(pADC_CommonInitStruct->CommonClock));
/* Note: Hardware constraint (refer to description of functions */
/* "LL_ADC_SetCommonXXX()": */
@@ -286,7 +286,7 @@
/* - common to several ADC */
/* (all ADC instances belonging to the same ADC common instance) */
/* - Set ADC clock (conversion clock) */
- LL_ADC_SetCommonClock(ADCxy_COMMON, ADC_CommonInitStruct->CommonClock);
+ LL_ADC_SetCommonClock(ADCxy_COMMON, pADC_CommonInitStruct->CommonClock);
}
else
{
@@ -300,16 +300,16 @@
/**
* @brief Set each @ref LL_ADC_CommonInitTypeDef field to default value.
- * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
+ * @param pADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure
* whose fields will be set to default values.
* @retval None
*/
-void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct)
+void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *pADC_CommonInitStruct)
{
- /* Set ADC_CommonInitStruct fields to default values */
+ /* Set pADC_CommonInitStruct fields to default values */
/* Set fields of ADC common */
/* (all ADC instances belonging to the same ADC common instance) */
- ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_ASYNC_DIV2;
+ pADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_ASYNC_DIV2;
}
@@ -533,22 +533,22 @@
* Refer to function LL_ADC_SetSamplingTimeCommonChannels();
* Refer to function LL_ADC_SetChannelSamplingTime();
* @param ADCx ADC instance
- * @param ADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+ * @param pADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
* @retval An ErrorStatus enumeration value:
* - SUCCESS: ADC registers are initialized
* - ERROR: ADC registers are not initialized
*/
-ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct)
+ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *pADC_InitStruct)
{
ErrorStatus status = SUCCESS;
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(ADCx));
- assert_param(IS_LL_ADC_CLOCK(ADC_InitStruct->Clock));
- assert_param(IS_LL_ADC_RESOLUTION(ADC_InitStruct->Resolution));
- assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment));
- assert_param(IS_LL_ADC_LOW_POWER(ADC_InitStruct->LowPowerMode));
+ assert_param(IS_LL_ADC_CLOCK(pADC_InitStruct->Clock));
+ assert_param(IS_LL_ADC_RESOLUTION(pADC_InitStruct->Resolution));
+ assert_param(IS_LL_ADC_DATA_ALIGN(pADC_InitStruct->DataAlignment));
+ assert_param(IS_LL_ADC_LOW_POWER(pADC_InitStruct->LowPowerMode));
/* Note: Hardware constraint (refer to description of this function): */
/* ADC instance must be disabled. */
@@ -565,15 +565,15 @@
| ADC_CFGR1_WAIT
| ADC_CFGR1_AUTOFF
,
- ADC_InitStruct->Resolution
- | ADC_InitStruct->DataAlignment
- | ADC_InitStruct->LowPowerMode
+ pADC_InitStruct->Resolution
+ | pADC_InitStruct->DataAlignment
+ | pADC_InitStruct->LowPowerMode
);
MODIFY_REG(ADCx->CFGR2,
ADC_CFGR2_CKMODE
,
- ADC_InitStruct->Clock
+ pADC_InitStruct->Clock
);
}
else
@@ -587,18 +587,18 @@
/**
* @brief Set each @ref LL_ADC_InitTypeDef field to default value.
- * @param ADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure
+ * @param pADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure
* whose fields will be set to default values.
* @retval None
*/
-void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct)
+void LL_ADC_StructInit(LL_ADC_InitTypeDef *pADC_InitStruct)
{
- /* Set ADC_InitStruct fields to default values */
+ /* Set pADC_InitStruct fields to default values */
/* Set fields of ADC instance */
- ADC_InitStruct->Clock = LL_ADC_CLOCK_SYNC_PCLK_DIV2;
- ADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B;
- ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT;
- ADC_InitStruct->LowPowerMode = LL_ADC_LP_MODE_NONE;
+ pADC_InitStruct->Clock = LL_ADC_CLOCK_SYNC_PCLK_DIV2;
+ pADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B;
+ pADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT;
+ pADC_InitStruct->LowPowerMode = LL_ADC_LP_MODE_NONE;
}
@@ -637,37 +637,37 @@
* Refer to function LL_ADC_SetSamplingTimeCommonChannels();
* Refer to function LL_ADC_SetChannelSamplingTime();
* @param ADCx ADC instance
- * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+ * @param pADC_RegInitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
* @retval An ErrorStatus enumeration value:
* - SUCCESS: ADC registers are initialized
* - ERROR: ADC registers are not initialized
*/
-ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct)
+ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *pADC_RegInitStruct)
{
ErrorStatus status = SUCCESS;
/* Check the parameters */
assert_param(IS_ADC_ALL_INSTANCE(ADCx));
- assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource));
- assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(ADC_REG_InitStruct->ContinuousMode));
- assert_param(IS_LL_ADC_REG_DMA_TRANSFER(ADC_REG_InitStruct->DMATransfer));
- assert_param(IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(ADC_REG_InitStruct->Overrun));
+ assert_param(IS_LL_ADC_REG_TRIG_SOURCE(pADC_RegInitStruct->TriggerSource));
+ assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(pADC_RegInitStruct->ContinuousMode));
+ assert_param(IS_LL_ADC_REG_DMA_TRANSFER(pADC_RegInitStruct->DMATransfer));
+ assert_param(IS_LL_ADC_REG_OVR_DATA_BEHAVIOR(pADC_RegInitStruct->Overrun));
if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED)
{
- assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength));
+ assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(pADC_RegInitStruct->SequencerLength));
}
if ((LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED)
- || (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
+ || (pADC_RegInitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
)
{
- assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont));
+ assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(pADC_RegInitStruct->SequencerDiscont));
/* ADC group regular continuous mode and discontinuous mode */
/* can not be enabled simultenaeously */
- assert_param((ADC_REG_InitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE)
- || (ADC_REG_InitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE));
+ assert_param((pADC_RegInitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE)
+ || (pADC_RegInitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE));
}
/* Note: Hardware constraint (refer to description of this function): */
@@ -686,7 +686,7 @@
/* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */
/* setting of trigger source to SW start. */
if ((LL_ADC_REG_GetSequencerConfigurable(ADCx) == LL_ADC_REG_SEQ_FIXED)
- || (ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
+ || (pADC_RegInitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE)
)
{
/* Case of sequencer mode fixed
@@ -701,11 +701,11 @@
| ADC_CFGR1_DMACFG
| ADC_CFGR1_OVRMOD
,
- ADC_REG_InitStruct->TriggerSource
- | ADC_REG_InitStruct->SequencerDiscont
- | ADC_REG_InitStruct->ContinuousMode
- | ADC_REG_InitStruct->DMATransfer
- | ADC_REG_InitStruct->Overrun
+ pADC_RegInitStruct->TriggerSource
+ | pADC_RegInitStruct->SequencerDiscont
+ | pADC_RegInitStruct->ContinuousMode
+ | pADC_RegInitStruct->DMATransfer
+ | pADC_RegInitStruct->Overrun
);
}
else
@@ -722,18 +722,18 @@
| ADC_CFGR1_DMACFG
| ADC_CFGR1_OVRMOD
,
- ADC_REG_InitStruct->TriggerSource
+ pADC_RegInitStruct->TriggerSource
| LL_ADC_REG_SEQ_DISCONT_DISABLE
- | ADC_REG_InitStruct->ContinuousMode
- | ADC_REG_InitStruct->DMATransfer
- | ADC_REG_InitStruct->Overrun
+ | pADC_RegInitStruct->ContinuousMode
+ | pADC_RegInitStruct->DMATransfer
+ | pADC_RegInitStruct->Overrun
);
}
/* Set ADC group regular sequencer length */
if (LL_ADC_REG_GetSequencerConfigurable(ADCx) != LL_ADC_REG_SEQ_FIXED)
{
- LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength);
+ LL_ADC_REG_SetSequencerLength(ADCx, pADC_RegInitStruct->SequencerLength);
}
}
else
@@ -746,22 +746,22 @@
/**
* @brief Set each @ref LL_ADC_REG_InitTypeDef field to default value.
- * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
+ * @param pADC_RegInitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure
* whose fields will be set to default values.
* @retval None
*/
-void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct)
+void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *pADC_RegInitStruct)
{
- /* Set ADC_REG_InitStruct fields to default values */
+ /* Set pADC_RegInitStruct fields to default values */
/* Set fields of ADC group regular */
/* Note: On this STM32 series, ADC trigger edge is set to value 0x0 by */
/* setting of trigger source to SW start. */
- ADC_REG_InitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE;
- ADC_REG_InitStruct->SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE;
- ADC_REG_InitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE;
- ADC_REG_InitStruct->ContinuousMode = LL_ADC_REG_CONV_SINGLE;
- ADC_REG_InitStruct->DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE;
- ADC_REG_InitStruct->Overrun = LL_ADC_REG_OVR_DATA_OVERWRITTEN;
+ pADC_RegInitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE;
+ pADC_RegInitStruct->SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE;
+ pADC_RegInitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE;
+ pADC_RegInitStruct->ContinuousMode = LL_ADC_REG_CONV_SINGLE;
+ pADC_RegInitStruct->DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE;
+ pADC_RegInitStruct->Overrun = LL_ADC_REG_OVR_DATA_OVERWRITTEN;
}
/**
diff --git a/Src/stm32g0xx_ll_comp.c b/Src/stm32g0xx_ll_comp.c
index f43fd37..f55461e 100644
--- a/Src/stm32g0xx_ll_comp.c
+++ b/Src/stm32g0xx_ll_comp.c
@@ -25,7 +25,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
diff --git a/Src/stm32g0xx_ll_crc.c b/Src/stm32g0xx_ll_crc.c
index 0725c62..d3e6f8e 100644
--- a/Src/stm32g0xx_ll_crc.c
+++ b/Src/stm32g0xx_ll_crc.c
@@ -26,7 +26,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
diff --git a/Src/stm32g0xx_ll_dac.c b/Src/stm32g0xx_ll_dac.c
index 135842a..035fa49 100644
--- a/Src/stm32g0xx_ll_dac.c
+++ b/Src/stm32g0xx_ll_dac.c
@@ -26,7 +26,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
diff --git a/Src/stm32g0xx_ll_dma.c b/Src/stm32g0xx_ll_dma.c
index 5499e0c..0aaacba 100644
--- a/Src/stm32g0xx_ll_dma.c
+++ b/Src/stm32g0xx_ll_dma.c
@@ -25,7 +25,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
@@ -106,7 +106,7 @@
((CHANNEL) == LL_DMA_CHANNEL_3) || \
((CHANNEL) == LL_DMA_CHANNEL_4) || \
((CHANNEL) == LL_DMA_CHANNEL_5))))
-#endif
+#endif /* DMA1_Channel8 */
#endif /* DMA2 */
/**
* @}
@@ -165,7 +165,7 @@
/* Release reset of DMA clock */
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2);
}
-#endif
+#endif /* DMA2 */
else
{
status = ERROR;
@@ -226,14 +226,14 @@
/* Reset interrupt pending bits for DMAx Channel6 */
LL_DMA_ClearFlag_GI6(DMAx);
}
-#endif
+#endif /* DMA1_Channel6 */
#if defined(DMA1_Channel7)
else if (Channel == LL_DMA_CHANNEL_7)
{
/* Reset interrupt pending bits for DMAx Channel7 */
LL_DMA_ClearFlag_GI7(DMAx);
}
-#endif
+#endif /* DMA1_Channel7 */
else
{
status = ERROR;
diff --git a/Src/stm32g0xx_ll_exti.c b/Src/stm32g0xx_ll_exti.c
index 024de16..5128618 100644
--- a/Src/stm32g0xx_ll_exti.c
+++ b/Src/stm32g0xx_ll_exti.c
@@ -24,7 +24,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
@@ -47,7 +47,7 @@
#define IS_LL_EXTI_LINE_0_31(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U)
#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
#define IS_LL_EXTI_LINE_32_63(__VALUE__) (((__VALUE__) & ~LL_EXTI_LINE_ALL_32_63) == 0x00000000U)
-#endif
+#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
#define IS_LL_EXTI_MODE(__VALUE__) (((__VALUE__) == LL_EXTI_MODE_IT) \
|| ((__VALUE__) == LL_EXTI_MODE_EVENT) \
|| ((__VALUE__) == LL_EXTI_MODE_IT_EVENT))
@@ -103,7 +103,7 @@
#elif defined(STM32G0B0xx) || defined(STM32G070xx) || defined(STM32G050xx) || defined(STM32G030xx)
LL_EXTI_WriteReg(RPR1, 0x0000FFFFU);
LL_EXTI_WriteReg(FPR1, 0x0000FFFFU);
-#endif
+#endif /* STM32G0C1xx || STM32G0B1xx */
#if defined(STM32G081xx) || defined(STM32G071xx)
/* Interrupt mask register 2 set to default reset values */
@@ -129,7 +129,7 @@
LL_EXTI_WriteReg(IMR2, 0x00000010U);
/* Event mask register 2 set to default reset values */
LL_EXTI_WriteReg(EMR2, 0x00000000U);
-#endif
+#endif /* STM32G081xx || STM32G071xx */
return 0x00u;
}
@@ -149,7 +149,7 @@
assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31));
#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
assert_param(IS_LL_EXTI_LINE_32_63(EXTI_InitStruct->Line_32_63));
-#endif
+#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand));
assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode));
@@ -238,7 +238,7 @@
break;
}
}
-#endif
+#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
}
/* DISABLE LineCommand */
else
@@ -250,7 +250,7 @@
/* De-configure EXTI Lines in range from 32 to 63 */
LL_EXTI_DisableIT_32_63(EXTI_InitStruct->Line_32_63);
LL_EXTI_DisableEvent_32_63(EXTI_InitStruct->Line_32_63);
-#endif
+#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
}
return status;
@@ -266,7 +266,7 @@
EXTI_InitStruct->Line_0_31 = LL_EXTI_LINE_NONE;
#if defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
EXTI_InitStruct->Line_32_63 = LL_EXTI_LINE_NONE;
-#endif
+#endif /* STM32G081xx || STM32G071xx || STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
EXTI_InitStruct->LineCommand = DISABLE;
EXTI_InitStruct->Mode = LL_EXTI_MODE_IT;
EXTI_InitStruct->Trigger = LL_EXTI_TRIGGER_FALLING;
diff --git a/Src/stm32g0xx_ll_gpio.c b/Src/stm32g0xx_ll_gpio.c
index 5cada34..8066f0f 100644
--- a/Src/stm32g0xx_ll_gpio.c
+++ b/Src/stm32g0xx_ll_gpio.c
@@ -25,7 +25,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
@@ -89,7 +89,7 @@
((__VALUE__) == LL_GPIO_AF_5 ) ||\
((__VALUE__) == LL_GPIO_AF_6 ) ||\
((__VALUE__) == LL_GPIO_AF_7 ))
-#endif
+#endif /* GPIOE */
/**
* @}
*/
diff --git a/Src/stm32g0xx_ll_i2c.c b/Src/stm32g0xx_ll_i2c.c
index 1fedaf2..0d27cf8 100644
--- a/Src/stm32g0xx_ll_i2c.c
+++ b/Src/stm32g0xx_ll_i2c.c
@@ -25,7 +25,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
@@ -117,7 +117,7 @@
/* Release reset of I2C clock */
LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_I2C3);
}
-#endif
+#endif /* I2C3 */
else
{
status = ERROR;
diff --git a/Src/stm32g0xx_ll_lptim.c b/Src/stm32g0xx_ll_lptim.c
index 6311512..38e604c 100644
--- a/Src/stm32g0xx_ll_lptim.c
+++ b/Src/stm32g0xx_ll_lptim.c
@@ -28,7 +28,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
@@ -48,22 +48,22 @@
* @{
*/
#define IS_LL_LPTIM_CLOCK_SOURCE(__VALUE__) (((__VALUE__) == LL_LPTIM_CLK_SOURCE_INTERNAL) \
- || ((__VALUE__) == LL_LPTIM_CLK_SOURCE_EXTERNAL))
+ || ((__VALUE__) == LL_LPTIM_CLK_SOURCE_EXTERNAL))
#define IS_LL_LPTIM_CLOCK_PRESCALER(__VALUE__) (((__VALUE__) == LL_LPTIM_PRESCALER_DIV1) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV2) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV4) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV8) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV16) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV32) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV64) \
- || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV128))
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV2) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV4) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV8) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV16) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV32) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV64) \
+ || ((__VALUE__) == LL_LPTIM_PRESCALER_DIV128))
#define IS_LL_LPTIM_WAVEFORM(__VALUE__) (((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_PWM) \
- || ((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_SETONCE))
+ || ((__VALUE__) == LL_LPTIM_OUTPUT_WAVEFORM_SETONCE))
#define IS_LL_LPTIM_OUTPUT_POLARITY(__VALUE__) (((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_REGULAR) \
- || ((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_INVERSE))
+ || ((__VALUE__) == LL_LPTIM_OUTPUT_POLARITY_INVERSE))
/**
* @}
*/
@@ -259,8 +259,7 @@
do
{
rcc_clock.SYSCLK_Frequency--; /* Used for timeout */
- }
- while (((LL_LPTIM_IsActiveFlag_CMPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL));
+ } while (((LL_LPTIM_IsActiveFlag_CMPOK(LPTIMx) != 1UL)) && ((rcc_clock.SYSCLK_Frequency) > 0UL));
LL_LPTIM_ClearFlag_CMPOK(LPTIMx);
}
diff --git a/Src/stm32g0xx_ll_lpuart.c b/Src/stm32g0xx_ll_lpuart.c
index 629c9d4..9f7bb99 100644
--- a/Src/stm32g0xx_ll_lpuart.c
+++ b/Src/stm32g0xx_ll_lpuart.c
@@ -151,7 +151,7 @@
/* Release reset of LPUART peripheral */
LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_LPUART2);
}
-#endif
+#endif /* LPUART2 */
else
{
status = ERROR;
@@ -182,7 +182,7 @@
uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO;
#else
uint32_t periphclk;
-#endif
+#endif /* LPUART2 */
/* Check the parameters */
assert_param(IS_LPUART_INSTANCE(LPUARTx));
@@ -239,7 +239,7 @@
}
#else
periphclk = LL_RCC_GetLPUARTClockFreq(LL_RCC_LPUART1_CLKSOURCE);
-#endif
+#endif /* LPUART2 */
/* Configure the LPUART Baud Rate :
- prescaler value is required
diff --git a/Src/stm32g0xx_ll_pwr.c b/Src/stm32g0xx_ll_pwr.c
index 34ab7fc..a84c860 100644
--- a/Src/stm32g0xx_ll_pwr.c
+++ b/Src/stm32g0xx_ll_pwr.c
@@ -6,11 +6,11 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2018 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
+ * the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
diff --git a/Src/stm32g0xx_ll_rcc.c b/Src/stm32g0xx_ll_rcc.c
index 6460732..e3f0120 100644
--- a/Src/stm32g0xx_ll_rcc.c
+++ b/Src/stm32g0xx_ll_rcc.c
@@ -44,32 +44,32 @@
*/
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \
- || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE) \
- || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE))
+ || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE))
#elif defined(STM32G081xx) || defined(STM32G071xx) || defined(STM32G070xx)
#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \
- || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE))
+ || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE))
#else
#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_USART1_CLKSOURCE)
#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
#if defined(LPUART1) && defined(LPUART2)
#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE) \
- || ((__VALUE__) == LL_RCC_LPUART2_CLKSOURCE))
+ || ((__VALUE__) == LL_RCC_LPUART2_CLKSOURCE))
#elif defined(LPUART1)
#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE)
#endif /* LPUART1 && LPUART2 */
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \
- || ((__VALUE__) == LL_RCC_I2C2_CLKSOURCE))
+ || ((__VALUE__) == LL_RCC_I2C2_CLKSOURCE))
#else
#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2C1_CLKSOURCE)
#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
#if defined(LPTIM1) || defined(LPTIM2)
#define IS_LL_RCC_LPTIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPTIM1_CLKSOURCE) \
- || ((__VALUE__) == LL_RCC_LPTIM2_CLKSOURCE))
+ || ((__VALUE__) == LL_RCC_LPTIM2_CLKSOURCE))
#endif /* LPTIM1 || LPTIM2 */
#if defined(RNG)
@@ -80,7 +80,7 @@
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE) \
- || ((__VALUE__) == LL_RCC_I2S2_CLKSOURCE))
+ || ((__VALUE__) == LL_RCC_I2S2_CLKSOURCE))
#else
#define IS_LL_RCC_I2S_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2S1_CLKSOURCE))
#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
@@ -99,7 +99,7 @@
#if defined(RCC_CCIPR_TIM1SEL) && defined(RCC_CCIPR_TIM15SEL)
#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE) \
- || ((__VALUE__) == LL_RCC_TIM15_CLKSOURCE))
+ || ((__VALUE__) == LL_RCC_TIM15_CLKSOURCE))
#elif defined(RCC_CCIPR_TIM1SEL)
#define IS_LL_RCC_TIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_TIM1_CLKSOURCE))
#endif /* RCC_CCIPR_TIM1SEL */
@@ -114,20 +114,28 @@
/** @defgroup RCC_LL_Private_Functions RCC Private functions
* @{
*/
-uint32_t RCC_GetSystemClockFreq(void);
-uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency);
-uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency);
-uint32_t RCC_PLL_GetFreqDomain_SYS(void);
-uint32_t RCC_PLL_GetFreqDomain_ADC(void);
-uint32_t RCC_PLL_GetFreqDomain_I2S1(void);
+static uint32_t RCC_GetSystemClockFreq(void);
+static uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency);
+static uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency);
+static uint32_t RCC_PLL_GetFreqDomain_SYS(void);
+static uint32_t RCC_PLL_GetFreqDomain_ADC(void);
+static uint32_t RCC_PLL_GetFreqDomain_I2S1(void);
#if defined(STM32G0C1xx) || defined(STM32G0B1xx) || defined(STM32G0B0xx)
-uint32_t RCC_PLL_GetFreqDomain_I2S2(void);
-uint32_t RCC_PLL_GetFreqDomain_USB(void);
-uint32_t RCC_PLL_GetFreqDomain_FDCAN(void);
+static uint32_t RCC_PLL_GetFreqDomain_I2S2(void);
+static uint32_t RCC_PLL_GetFreqDomain_USB(void);
#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
-uint32_t RCC_PLL_GetFreqDomain_RNG(void);
-uint32_t RCC_PLL_GetFreqDomain_TIM1(void);
-uint32_t RCC_PLL_GetFreqDomain_TIM15(void);
+#if defined(FDCAN1) || defined(FDCAN2)
+static uint32_t RCC_PLL_GetFreqDomain_FDCAN(void);
+#endif /* FDCAN1 || FDCAN2 */
+#if defined(RNG)
+static uint32_t RCC_PLL_GetFreqDomain_RNG(void);
+#endif /* RNG */
+#if defined(RCC_PLLQ_SUPPORT) && defined(RCC_CCIPR_TIM1SEL)
+static uint32_t RCC_PLL_GetFreqDomain_TIM1(void);
+#endif /* RCC_PLLQ_SUPPORT && RCC_CCIPR_TIM1SEL */
+#if defined(RCC_CCIPR_TIM15SEL)
+static uint32_t RCC_PLL_GetFreqDomain_TIM15(void);
+#endif /* RCC_CCIPR_TIM15SEL */
/**
* @}
*/
@@ -413,6 +421,7 @@
#endif /* RCC_CCIPR_I2C2SEL */
else
{
+ /* nothing to do */
}
return i2c_frequency;
@@ -513,7 +522,7 @@
if (LPUARTxSource == LL_RCC_LPUART1_CLKSOURCE)
{
/* LPUART1CLK clock frequency */
- switch (LL_RCC_GetLPUARTClockSource(LPUARTxSource))
+ switch (LL_RCC_GetLPUARTClockSource(LPUARTxSource))
{
case LL_RCC_LPUART1_CLKSOURCE_SYSCLK: /* LPUART1 Clock is System Clock */
lpuart_frequency = RCC_GetSystemClockFreq();
@@ -572,7 +581,7 @@
#endif /* LPUART2 */
else
{
- }
+ }
return lpuart_frequency;
}
@@ -1004,7 +1013,7 @@
* @brief Return SYSTEM clock frequency
* @retval SYSTEM clock frequency (in Hz)
*/
-uint32_t RCC_GetSystemClockFreq(void)
+static uint32_t RCC_GetSystemClockFreq(void)
{
uint32_t frequency;
uint32_t hsidiv;
@@ -1035,7 +1044,7 @@
* @param SYSCLK_Frequency SYSCLK clock frequency
* @retval HCLK clock frequency (in Hz)
*/
-uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency)
+static uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency)
{
/* HCLK clock frequency */
return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler());
@@ -1046,7 +1055,7 @@
* @param HCLK_Frequency HCLK clock frequency
* @retval PCLK1 clock frequency (in Hz)
*/
-uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency)
+static uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency)
{
/* PCLK1 clock frequency */
return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler());
@@ -1055,7 +1064,7 @@
* @brief Return PLL clock frequency used for system domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_SYS(void)
+static uint32_t RCC_PLL_GetFreqDomain_SYS(void)
{
uint32_t pllinputfreq;
uint32_t pllsource;
@@ -1086,7 +1095,7 @@
* @brief Return PLL clock frequency used for ADC domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_ADC(void)
+static uint32_t RCC_PLL_GetFreqDomain_ADC(void)
{
uint32_t pllinputfreq;
uint32_t pllsource;
@@ -1116,7 +1125,7 @@
* @brief Return PLL clock frequency used for FDCAN domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_FDCAN(void)
+static uint32_t RCC_PLL_GetFreqDomain_FDCAN(void)
{
uint32_t pllinputfreq;
uint32_t pllsource;
@@ -1147,7 +1156,7 @@
* @brief Return PLL clock frequency used for I2S1 domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_I2S1(void)
+static uint32_t RCC_PLL_GetFreqDomain_I2S1(void)
{
uint32_t pllinputfreq;
uint32_t pllsource;
@@ -1177,7 +1186,7 @@
* @brief Return PLL clock frequency used for I2S2 domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_I2S2(void)
+static uint32_t RCC_PLL_GetFreqDomain_I2S2(void)
{
uint32_t pllinputfreq;
uint32_t pllsource;
@@ -1208,7 +1217,7 @@
* @brief Return PLL clock frequency used for RNG domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_RNG(void)
+static uint32_t RCC_PLL_GetFreqDomain_RNG(void)
{
uint32_t pllinputfreq;
uint32_t pllsource;
@@ -1240,7 +1249,7 @@
* @brief Return PLL clock frequency used for USB domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_USB(void)
+static uint32_t RCC_PLL_GetFreqDomain_USB(void)
{
uint32_t pllinputfreq;
uint32_t pllsource;
@@ -1267,12 +1276,12 @@
}
#endif /* STM32G0C1xx || STM32G0B1xx || STM32G0B0xx */
-#if defined(RCC_PLLQ_SUPPORT)
+#if defined(RCC_PLLQ_SUPPORT) && defined(RCC_CCIPR_TIM1SEL)
/**
* @brief Return PLL clock frequency used for TIM1 domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_TIM1(void)
+static uint32_t RCC_PLL_GetFreqDomain_TIM1(void)
{
uint32_t pllinputfreq;
uint32_t pllsource;
@@ -1299,12 +1308,12 @@
}
#endif /* RCC_PLLQ_SUPPORT */
-#if defined(RCC_PLLQ_SUPPORT) && defined(TIM15)
+#if defined(RCC_CCIPR_TIM15SEL)
/**
* @brief Return PLL clock frequency used for TIM15 domain
* @retval PLL clock frequency (in Hz)
*/
-uint32_t RCC_PLL_GetFreqDomain_TIM15(void)
+static uint32_t RCC_PLL_GetFreqDomain_TIM15(void)
{
uint32_t pllinputfreq;
uint32_t pllsource;
@@ -1329,7 +1338,7 @@
return __LL_RCC_CALC_PLLCLK_TIM15_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ());
}
-#endif /* RCC_PLLQ_SUPPORT && TIM15 */
+#endif /* RCC_CCIPR_TIM15SEL */
/**
* @}
*/
diff --git a/Src/stm32g0xx_ll_rng.c b/Src/stm32g0xx_ll_rng.c
index f9690a0..926553b 100644
--- a/Src/stm32g0xx_ll_rng.c
+++ b/Src/stm32g0xx_ll_rng.c
@@ -26,7 +26,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
@@ -42,7 +42,7 @@
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
-/** @addtogroup RNG_LL_Private_Macros
+/** @defgroup RNG_LL_Private_Macros RNG Private Macros
* @{
*/
#define IS_LL_RNG_CED(__MODE__) (((__MODE__) == LL_RNG_CED_ENABLE) || \
diff --git a/Src/stm32g0xx_ll_rtc.c b/Src/stm32g0xx_ll_rtc.c
index dd4c800..cdb7039 100644
--- a/Src/stm32g0xx_ll_rtc.c
+++ b/Src/stm32g0xx_ll_rtc.c
@@ -25,7 +25,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
@@ -87,18 +87,7 @@
#define IS_LL_RTC_DAY(__DAY__) (((__DAY__) >= 1U) && ((__DAY__) <= 31U))
-#define IS_LL_RTC_MONTH(__VALUE__) (((__VALUE__) == LL_RTC_MONTH_JANUARY) \
- || ((__VALUE__) == LL_RTC_MONTH_FEBRUARY) \
- || ((__VALUE__) == LL_RTC_MONTH_MARCH) \
- || ((__VALUE__) == LL_RTC_MONTH_APRIL) \
- || ((__VALUE__) == LL_RTC_MONTH_MAY) \
- || ((__VALUE__) == LL_RTC_MONTH_JUNE) \
- || ((__VALUE__) == LL_RTC_MONTH_JULY) \
- || ((__VALUE__) == LL_RTC_MONTH_AUGUST) \
- || ((__VALUE__) == LL_RTC_MONTH_SEPTEMBER) \
- || ((__VALUE__) == LL_RTC_MONTH_OCTOBER) \
- || ((__VALUE__) == LL_RTC_MONTH_NOVEMBER) \
- || ((__VALUE__) == LL_RTC_MONTH_DECEMBER))
+#define IS_LL_RTC_MONTH(__MONTH__) (((__MONTH__) >= 1U) && ((__MONTH__) <= 12U))
#define IS_LL_RTC_YEAR(__YEAR__) ((__YEAR__) <= 99U)
diff --git a/Src/stm32g0xx_ll_spi.c b/Src/stm32g0xx_ll_spi.c
index 2402a0b..87eb7d3 100644
--- a/Src/stm32g0xx_ll_spi.c
+++ b/Src/stm32g0xx_ll_spi.c
@@ -27,7 +27,7 @@
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
-#endif
+#endif /* USE_FULL_ASSERT */
/** @addtogroup STM32G0xx_LL_Driver
* @{
@@ -233,6 +233,12 @@
SPI_CR2_DS | SPI_CR2_SSOE,
SPI_InitStruct->DataWidth | (SPI_InitStruct->NSS >> 16U));
+ /* Set Rx FIFO to Quarter (1 Byte) in case of 8 Bits mode. No DataPacking by default */
+ if (SPI_InitStruct->DataWidth < LL_SPI_DATAWIDTH_9BIT)
+ {
+ LL_SPI_SetRxFIFOThreshold(SPIx, LL_SPI_RX_FIFO_TH_QUARTER);
+ }
+
/*---------------------------- SPIx CRCPR Configuration ----------------------
* Configure SPIx CRCPR with parameters:
* - CRCPoly: CRCPOLY[15:0] bits
diff --git a/Src/stm32g0xx_ll_tim.c b/Src/stm32g0xx_ll_tim.c
index 52d5283..52335a8 100644
--- a/Src/stm32g0xx_ll_tim.c
+++ b/Src/stm32g0xx_ll_tim.c
@@ -238,35 +238,35 @@
LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM2);
LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM2);
}
-#endif
+#endif /* TIM2 */
#if defined(TIM3)
else if (TIMx == TIM3)
{
LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM3);
LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM3);
}
-#endif
+#endif /* TIM3 */
#if defined(TIM4)
else if (TIMx == TIM4)
{
LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM4);
LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM4);
}
-#endif
+#endif /* TIM4 */
#if defined(TIM6)
else if (TIMx == TIM6)
{
LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM6);
LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM6);
}
-#endif
+#endif /* TIM6 */
#if defined(TIM7)
else if (TIMx == TIM7)
{
LL_APB1_GRP1_ForceReset(LL_APB1_GRP1_PERIPH_TIM7);
LL_APB1_GRP1_ReleaseReset(LL_APB1_GRP1_PERIPH_TIM7);
}
-#endif
+#endif /* TIM7 */
else if (TIMx == TIM14)
{
LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM14);
@@ -278,7 +278,7 @@
LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM15);
LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM15);
}
-#endif
+#endif /* TIM15 */
else if (TIMx == TIM16)
{
LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM16);
@@ -290,7 +290,7 @@
LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_TIM17);
LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_TIM17);
}
-#endif
+#endif /* TIM17 */
else
{
result = ERROR;
@@ -318,7 +318,8 @@
/**
* @brief Configure the TIMx time base unit.
* @param TIMx Timer Instance
- * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure (TIMx time base unit configuration data structure)
+ * @param TIM_InitStruct pointer to a @ref LL_TIM_InitTypeDef structure
+ * (TIMx time base unit configuration data structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: TIMx registers are de-initialized
* - ERROR: not applicable
@@ -371,7 +372,8 @@
/**
* @brief Set the fields of the TIMx output channel configuration data
* structure to their default values.
- * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (the output channel configuration data structure)
+ * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure
+ * (the output channel configuration data structure)
* @retval None
*/
void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct)
@@ -397,7 +399,8 @@
* @arg @ref LL_TIM_CHANNEL_CH4
* @arg @ref LL_TIM_CHANNEL_CH5
* @arg @ref LL_TIM_CHANNEL_CH6
- * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration data structure)
+ * @param TIM_OC_InitStruct pointer to a @ref LL_TIM_OC_InitTypeDef structure (TIMx output channel configuration
+ * data structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: TIMx output channel is initialized
* - ERROR: TIMx output channel is not initialized
@@ -436,7 +439,8 @@
/**
* @brief Set the fields of the TIMx input channel configuration data
* structure to their default values.
- * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration data structure)
+ * @param TIM_ICInitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (the input channel configuration
+ * data structure)
* @retval None
*/
void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct)
@@ -456,7 +460,8 @@
* @arg @ref LL_TIM_CHANNEL_CH2
* @arg @ref LL_TIM_CHANNEL_CH3
* @arg @ref LL_TIM_CHANNEL_CH4
- * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data structure)
+ * @param TIM_IC_InitStruct pointer to a @ref LL_TIM_IC_InitTypeDef structure (TIMx input channel configuration data
+ * structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: TIMx output channel is initialized
* - ERROR: TIMx output channel is not initialized
@@ -488,7 +493,8 @@
/**
* @brief Fills each TIM_EncoderInitStruct field with its default value
- * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface configuration data structure)
+ * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (encoder interface
+ * configuration data structure)
* @retval None
*/
void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct)
@@ -508,7 +514,8 @@
/**
* @brief Configure the encoder interface of the timer instance.
* @param TIMx Timer Instance
- * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface configuration data structure)
+ * @param TIM_EncoderInitStruct pointer to a @ref LL_TIM_ENCODER_InitTypeDef structure (TIMx encoder interface
+ * configuration data structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: TIMx registers are de-initialized
* - ERROR: not applicable
@@ -572,7 +579,8 @@
/**
* @brief Set the fields of the TIMx Hall sensor interface configuration data
* structure to their default values.
- * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (HALL sensor interface configuration data structure)
+ * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (HALL sensor interface
+ * configuration data structure)
* @retval None
*/
void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct)
@@ -599,7 +607,8 @@
* @note LL_TIM_IC_POLARITY_BOTHEDGE must not be used for TI1 when it is used
* when TIMx operates in Hall sensor interface mode.
* @param TIMx Timer Instance
- * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (TIMx HALL sensor interface configuration data structure)
+ * @param TIM_HallSensorInitStruct pointer to a @ref LL_TIM_HALLSENSOR_InitTypeDef structure (TIMx HALL sensor
+ * interface configuration data structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: TIMx registers are de-initialized
* - ERROR: not applicable
@@ -679,7 +688,8 @@
/**
* @brief Set the fields of the Break and Dead Time configuration data structure
* to their default values.
- * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration data structure)
+ * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration
+ * data structure)
* @retval None
*/
void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct)
@@ -711,7 +721,8 @@
* @note Macro IS_TIM_BKIN2_INSTANCE(TIMx) can be used to check whether or not
* a timer instance provides a second break input.
* @param TIMx Timer Instance
- * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration data structure)
+ * @param TIM_BDTRInitStruct pointer to a @ref LL_TIM_BDTR_InitTypeDef structure (Break and Dead Time configuration
+ * data structure)
* @retval An ErrorStatus enumeration value:
* - SUCCESS: Break and Dead Time is initialized
* - ERROR: not applicable
diff --git a/Src/stm32g0xx_ll_usart.c b/Src/stm32g0xx_ll_usart.c
index 12863dc..362023a 100644
--- a/Src/stm32g0xx_ll_usart.c
+++ b/Src/stm32g0xx_ll_usart.c
@@ -66,9 +66,6 @@
/* __VALUE__ In case of oversampling by 16 and 8, BRR content must be greater than or equal to 16d. */
#define IS_LL_USART_BRR_MIN(__VALUE__) ((__VALUE__) >= 16U)
-/* __VALUE__ BRR content must be lower than or equal to 0xFFFF. */
-#define IS_LL_USART_BRR_MAX(__VALUE__) ((__VALUE__) <= 0x0000FFFFU)
-
#define IS_LL_USART_DIRECTION(__VALUE__) (((__VALUE__) == LL_USART_DIRECTION_NONE) \
|| ((__VALUE__) == LL_USART_DIRECTION_RX) \
|| ((__VALUE__) == LL_USART_DIRECTION_TX) \
@@ -203,8 +200,9 @@
/**
* @brief Initialize USART registers according to the specified
* parameters in USART_InitStruct.
- * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0),
- * USART Peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
+ * @note As some bits in USART configuration registers can only be written when
+ * the USART is disabled (USART_CR1_UE bit =0), USART Peripheral should be in disabled state prior calling
+ * this function. Otherwise, ERROR result will be returned.
* @note Baud rate value stored in USART_InitStruct BaudRate field, should be valid (different from 0).
* @param USARTx USART Instance
* @param USART_InitStruct pointer to a LL_USART_InitTypeDef structure
@@ -217,9 +215,9 @@
{
ErrorStatus status = ERROR;
uint32_t periphclk = LL_RCC_PERIPH_FREQUENCY_NO;
-#if !defined(RCC_CCIPR_USART3SEL)&&!defined(RCC_CCIPR_USART4SEL)||!defined(RCC_CCIPR_USART2SEL) ||!defined(RCC_CCIPR_USART5SEL) ||!defined(RCC_CCIPR_USART6SEL)
+#if !defined(RCC_CCIPR_USART3SEL)&&!defined(RCC_CCIPR_USART4SEL)||(!defined(RCC_CCIPR_USART2SEL))||!defined(RCC_CCIPR_USART5SEL)||!defined(RCC_CCIPR_USART6SEL)
LL_RCC_ClocksTypeDef RCC_Clocks;
-#endif /* !RCC_CCIPR_USART3SEL && !RCC_CCIPR_USART4SEL || !RCC_CCIPR_USART2SEL */
+#endif
/* Check the parameters */
assert_param(IS_UART_INSTANCE(USARTx));
@@ -258,7 +256,8 @@
/*---------------------------- USART CR3 Configuration ---------------------
* Configure USARTx CR3 (Hardware Flow Control) with parameters:
- * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to USART_InitStruct->HardwareFlowControl value.
+ * - HardwareFlowControl: USART_CR3_RTSE, USART_CR3_CTSE bits according to
+ * USART_InitStruct->HardwareFlowControl value.
*/
LL_USART_SetHWFlowCtrl(USARTx, USART_InitStruct->HardwareFlowControl);
@@ -277,7 +276,7 @@
/* USART2 clock is PCLK */
LL_RCC_GetSystemClocksFreq(&RCC_Clocks);
periphclk = RCC_Clocks.PCLK1_Frequency;
-#endif /* RCC_CCIPR_USART2SEL */
+#endif
}
#if defined(USART3)
else if (USARTx == USART3)
@@ -288,7 +287,7 @@
/* USART3 clock is PCLK */
LL_RCC_GetSystemClocksFreq(&RCC_Clocks);
periphclk = RCC_Clocks.PCLK1_Frequency;
-#endif /* RCC_CCIPR_USART3SEL */
+#endif
}
#endif /* USART3 */
#if defined(USART4)
@@ -341,9 +340,6 @@
/* Check BRR is greater than or equal to 16d */
assert_param(IS_LL_USART_BRR_MIN(USARTx->BRR));
-
- /* Check BRR is lower than or equal to 0xFFFF */
- assert_param(IS_LL_USART_BRR_MAX(USARTx->BRR));
}
/*---------------------------- USART PRESC Configuration -----------------------
@@ -380,13 +376,15 @@
/**
* @brief Initialize USART Clock related settings according to the
* specified parameters in the USART_ClockInitStruct.
- * @note As some bits in USART configuration registers can only be written when the USART is disabled (USART_CR1_UE bit =0),
- * USART Peripheral should be in disabled state prior calling this function. Otherwise, ERROR result will be returned.
+ * @note As some bits in USART configuration registers can only be written when
+ * the USART is disabled (USART_CR1_UE bit =0), USART Peripheral should be in disabled state prior calling
+ * this function. Otherwise, ERROR result will be returned.
* @param USARTx USART Instance
* @param USART_ClockInitStruct pointer to a @ref LL_USART_ClockInitTypeDef structure
* that contains the Clock configuration information for the specified USART peripheral.
* @retval An ErrorStatus enumeration value:
- * - SUCCESS: USART registers related to Clock settings are initialized according to USART_ClockInitStruct content
+ * - SUCCESS: USART registers related to Clock settings are initialized according
+ * to USART_ClockInitStruct content
* - ERROR: Problem occurred during USART Registers initialization
*/
ErrorStatus LL_USART_ClockInit(USART_TypeDef *USARTx, LL_USART_ClockInitTypeDef *USART_ClockInitStruct)
@@ -401,37 +399,25 @@
CRx registers */
if (LL_USART_IsEnabled(USARTx) == 0U)
{
- /*---------------------------- USART CR2 Configuration -----------------------*/
- /* If Clock signal has to be output */
- if (USART_ClockInitStruct->ClockOutput == LL_USART_CLOCK_DISABLE)
- {
- /* Deactivate Clock signal delivery :
- * - Disable Clock Output: USART_CR2_CLKEN cleared
- */
- LL_USART_DisableSCLKOutput(USARTx);
- }
- else
- {
- /* Ensure USART instance is USART capable */
- assert_param(IS_USART_INSTANCE(USARTx));
+ /* Ensure USART instance is USART capable */
+ assert_param(IS_USART_INSTANCE(USARTx));
- /* Check clock related parameters */
- assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity));
- assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase));
- assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse));
+ /* Check clock related parameters */
+ assert_param(IS_LL_USART_CLOCKPOLARITY(USART_ClockInitStruct->ClockPolarity));
+ assert_param(IS_LL_USART_CLOCKPHASE(USART_ClockInitStruct->ClockPhase));
+ assert_param(IS_LL_USART_LASTBITCLKOUTPUT(USART_ClockInitStruct->LastBitClockPulse));
- /*---------------------------- USART CR2 Configuration -----------------------
- * Configure USARTx CR2 (Clock signal related bits) with parameters:
- * - Enable Clock Output: USART_CR2_CLKEN set
- * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value
- * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value
- * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value.
- */
- MODIFY_REG(USARTx->CR2,
- USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL,
- USART_CR2_CLKEN | USART_ClockInitStruct->ClockPolarity |
- USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse);
- }
+ /*---------------------------- USART CR2 Configuration -----------------------
+ * Configure USARTx CR2 (Clock signal related bits) with parameters:
+ * - Clock Output: USART_CR2_CLKEN bit according to USART_ClockInitStruct->ClockOutput value
+ * - Clock Polarity: USART_CR2_CPOL bit according to USART_ClockInitStruct->ClockPolarity value
+ * - Clock Phase: USART_CR2_CPHA bit according to USART_ClockInitStruct->ClockPhase value
+ * - Last Bit Clock Pulse Output: USART_CR2_LBCL bit according to USART_ClockInitStruct->LastBitClockPulse value.
+ */
+ MODIFY_REG(USARTx->CR2,
+ USART_CR2_CLKEN | USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_LBCL,
+ USART_ClockInitStruct->ClockOutput | USART_ClockInitStruct->ClockPolarity |
+ USART_ClockInitStruct->ClockPhase | USART_ClockInitStruct->LastBitClockPulse);
}
/* Else (USART not in Disabled state => return ERROR */
else
@@ -452,9 +438,12 @@
{
/* Set LL_USART_ClockInitStruct fields with default values */
USART_ClockInitStruct->ClockOutput = LL_USART_CLOCK_DISABLE;
- USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
- USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
- USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput = LL_USART_CLOCK_DISABLE */
+ USART_ClockInitStruct->ClockPolarity = LL_USART_POLARITY_LOW; /* Not relevant when ClockOutput =
+ LL_USART_CLOCK_DISABLE */
+ USART_ClockInitStruct->ClockPhase = LL_USART_PHASE_1EDGE; /* Not relevant when ClockOutput =
+ LL_USART_CLOCK_DISABLE */
+ USART_ClockInitStruct->LastBitClockPulse = LL_USART_LASTCLKPULSE_NO_OUTPUT; /* Not relevant when ClockOutput =
+ LL_USART_CLOCK_DISABLE */
}
/**
diff --git a/Src/stm32g0xx_ll_usb.c b/Src/stm32g0xx_ll_usb.c
index 4867b97..a83ddc8 100644
--- a/Src/stm32g0xx_ll_usb.c
+++ b/Src/stm32g0xx_ll_usb.c
@@ -26,7 +26,7 @@
******************************************************************************
* @attention
*
- * <h2><center>© Copyright (c) 2020 STMicroelectronics.
+ * <h2><center>© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
@@ -489,22 +489,73 @@
/* manage isochronous double buffer IN mode */
else
{
- /* Write the data to the USB endpoint */
+ /* enable double buffer */
+ PCD_SET_EP_DBUF(USBx, ep->num);
+
+ /* each Time to write in PMA xfer_len_db will */
+ ep->xfer_len_db -= len;
+
+ /* Fill the data buffer */
if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U)
{
/* Set the Double buffer counter for pmabuffer1 */
PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr1;
+
+ /* Write the user buffer to USB PMA */
+ USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
+ ep->xfer_buff += len;
+
+ if (ep->xfer_len_db > ep->maxpacket)
+ {
+ ep->xfer_len_db -= len;
+ }
+ else
+ {
+ len = ep->xfer_len_db;
+ ep->xfer_len_db = 0U;
+ }
+
+ if (len > 0U)
+ {
+ /* Set the Double buffer counter for pmabuffer0 */
+ PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len);
+ pmabuffer = ep->pmaaddr0;
+
+ /* Write the user buffer to USB PMA */
+ USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
+ }
}
else
{
/* Set the Double buffer counter for pmabuffer0 */
PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr0;
- }
- USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
- PCD_FreeUserBuffer(USBx, ep->num, ep->is_in);
+ /* Write the user buffer to USB PMA */
+ USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
+ ep->xfer_buff += len;
+
+ if (ep->xfer_len_db > ep->maxpacket)
+ {
+ ep->xfer_len_db -= len;
+ }
+ else
+ {
+ len = ep->xfer_len_db;
+ ep->xfer_len_db = 0U;
+ }
+
+ if (len > 0U)
+ {
+ /* Set the Double buffer counter for pmabuffer1 */
+ PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
+ pmabuffer = ep->pmaaddr1;
+
+ /* Write the user buffer to USB PMA */
+ USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
+ }
+ }
}
}
@@ -630,7 +681,7 @@
return HAL_OK;
}
-#endif
+#endif /* HAL_PCD_MODULE_ENABLED */
/**
* @brief USB_StopDevice Stop the usb device mode
@@ -774,7 +825,6 @@
/* When Number of data is not word aligned, write the remaining Byte */
if (remaining_bytes != 0U)
{
- count = 0U;
tmp = 0U;
do
@@ -831,14 +881,13 @@
/*When Number of data is not word aligned, read the remaining byte*/
if (remaining_bytes != 0U)
{
- count = 0U;
tmp = *(__IO uint32_t *)pdwVal;
do
{
*(uint8_t *)pBuf = (uint8_t)(tmp >> (8U * (uint8_t)(count)));
count++;
pBuf++;
- remaining_bytes-- ;
+ remaining_bytes--;
} while (remaining_bytes != 0U);
}
}
@@ -859,11 +908,10 @@
HAL_StatusTypeDef USB_HostInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg)
{
UNUSED(cfg);
+
/* Clear All Pending Interrupt */
USBx->ISTR = 0U;
- HAL_Delay(200);
-
/* Disable all interrupts */
USBx->CNTR &= ~(USB_CNTR_CTRM | USB_CNTR_PMAOVRM | USB_CNTR_ERRM |
USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_DCON |
@@ -872,7 +920,7 @@
/* Clear All Pending Interrupt */
USBx->ISTR = 0U;
- /*Enable Global interrupt */
+ /* Enable Global interrupt */
USBx->CNTR |= (USB_CNTR_CTRM | USB_CNTR_PMAOVRM | USB_CNTR_ERRM |
USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_DCON |
USB_CNTR_SOFM | USB_CNTR_ESOFM | USB_CNTR_L1REQM);
@@ -908,8 +956,8 @@
* @param USBx Selected device
* @retval speed Host speed
* This parameter can be one of these values
- * @arg USB_DRD_SPEED_FULL Full speed mode
- * @arg USB_DRD_SPEED_LOW Low speed mode
+ * @arg USB_DRD_SPEED_FS Full speed mode
+ * @arg USB_DRD_SPEED_LS Low speed mode
*/
uint32_t USB_GetHostSpeed(USB_DRD_TypeDef *USBx)
{
@@ -989,6 +1037,7 @@
{
HAL_StatusTypeDef ret = HAL_OK;
uint32_t wChRegVal;
+ uint32_t HostCoreSpeed;
wChRegVal = USB_DRD_GET_CHEP(USBx, phy_ch_num) & USB_CH_T_MASK;
@@ -1020,8 +1069,11 @@
wChRegVal |= (((uint32_t)dev_address << USB_CHEP_DEVADDR_Pos) |
((uint32_t)epnum & 0x0FU));
+ /* Get Host core Speed */
+ HostCoreSpeed = USB_GetHostSpeed(USBx);
+
/* Set the device speed in case using HUB FS with device LS */
- if (speed == USB_DRD_SPEED_LSFS)
+ if ((speed == USB_DRD_SPEED_LS) && (HostCoreSpeed == USB_DRD_SPEED_FS))
{
wChRegVal |= USB_CHEP_LSEP;
}
@@ -1029,7 +1081,7 @@
/* Set the dev_address & ep type */
USB_DRD_SET_CHEP(USBx, phy_ch_num, (wChRegVal | USB_CH_VTRX | USB_CH_VTTX));
- /*Set the Rx Count */
+ /* Set the Rx Count */
USB_DRD_SET_CHEP_RX_CNT(USBx, phy_ch_num, mps);
return ret;
@@ -1245,7 +1297,6 @@
/* Multi packet transfer */
if (hc->xfer_len_db > hc->max_packet)
{
- *len = hc->max_packet;
hc->xfer_len_db -= *len;
}
else
