| /** |
| ****************************************************************************** |
| * @file stm32l0xx_hal_firewall.h |
| * @author MCD Application Team |
| * @brief Header file of FIREWALL HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright(c) 2016 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32L0xx_HAL_FIREWALL_H |
| #define __STM32L0xx_HAL_FIREWALL_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #if !defined (STM32L010xB) && !defined (STM32L010x8) && !defined (STM32L010x6) && !defined (STM32L010x4) && !defined (STM32L011xx) && !defined (STM32L021xx) && !defined (STM32L031xx) && !defined (STM32L041xx) |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l0xx_hal_def.h" |
| |
| /** @addtogroup STM32L0xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @defgroup FIREWALL FIREWALL |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup FIREWALL_Exported_Types FIREWALL Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief FIREWALL Initialization Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t CodeSegmentStartAddress; /*!< Protected code segment start address. This value is 24-bit long, the 8 LSB bits are |
| reserved and forced to 0 in order to allow a 256-byte granularity. */ |
| |
| uint32_t CodeSegmentLength; /*!< Protected code segment length in bytes. This value is 22-bit long, the 8 LSB bits are |
| reserved and forced to 0 for the length to be a multiple of 256 bytes. */ |
| |
| uint32_t NonVDataSegmentStartAddress; /*!< Protected non-volatile data segment start address. This value is 24-bit long, the 8 LSB |
| bits are reserved and forced to 0 in order to allow a 256-byte granularity. */ |
| |
| uint32_t NonVDataSegmentLength; /*!< Protected non-volatile data segment length in bytes. This value is 22-bit long, the 8 LSB |
| bits are reserved and forced to 0 for the length to be a multiple of 256 bytes. */ |
| |
| uint32_t VDataSegmentStartAddress; /*!< Protected volatile data segment start address. This value is 17-bit long, the 6 LSB bits |
| are reserved and forced to 0 in order to allow a 64-byte granularity. */ |
| |
| uint32_t VDataSegmentLength; /*!< Protected volatile data segment length in bytes. This value is 17-bit long, the 6 LSB |
| bits are reserved and forced to 0 for the length to be a multiple of 64 bytes. */ |
| |
| uint32_t VolatileDataExecution; /*!< Set VDE bit specifying whether or not the volatile data segment can be executed. |
| When VDS = 1 (set by parameter VolatileDataShared), VDE bit has no meaning. |
| This parameter can be a value of @ref FIREWALL_VolatileData_Executable */ |
| |
| uint32_t VolatileDataShared; /*!< Set VDS bit in specifying whether or not the volatile data segment can be shared with a |
| non-protected application code. |
| This parameter can be a value of @ref FIREWALL_VolatileData_Shared */ |
| |
| }FIREWALL_InitTypeDef; |
| |
| |
| /** |
| * @} |
| */ |
| |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup FIREWALL_Exported_Constants FIREWALL Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup FIREWALL_VolatileData_Executable FIREWALL volatile data segment execution status |
| * @{ |
| */ |
| #define FIREWALL_VOLATILEDATA_NOT_EXECUTABLE (0x0000U) |
| #define FIREWALL_VOLATILEDATA_EXECUTABLE FW_CR_VDE |
| /** |
| * @} |
| */ |
| |
| /** @defgroup FIREWALL_VolatileData_Shared FIREWALL volatile data segment share status |
| * @{ |
| */ |
| #define FIREWALL_VOLATILEDATA_NOT_SHARED (0x0000U) |
| #define FIREWALL_VOLATILEDATA_SHARED FW_CR_VDS |
| /** |
| * @} |
| */ |
| |
| /** @defgroup FIREWALL_Pre_Arm FIREWALL pre arm status |
| * @{ |
| */ |
| #define FIREWALL_PRE_ARM_RESET (0x0000U) |
| #define FIREWALL_PRE_ARM_SET FW_CR_FPA |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros --------------------------------------------------------*/ |
| /** @addtogroup FIREWALL_Private |
| * @{ |
| */ |
| #define IS_FIREWALL_CODE_SEGMENT_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) < (FLASH_BASE + FLASH_SIZE))) |
| #define IS_FIREWALL_CODE_SEGMENT_LENGTH(ADDRESS, LENGTH) (((ADDRESS) + (LENGTH)) <= (FLASH_BASE + FLASH_SIZE)) |
| |
| #define IS_FIREWALL_NONVOLATILEDATA_SEGMENT_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) < (FLASH_BASE + FLASH_SIZE))) |
| #define IS_FIREWALL_NONVOLATILEDATA_SEGMENT_LENGTH(ADDRESS, LENGTH) (((ADDRESS) + (LENGTH)) <= (FLASH_BASE + FLASH_SIZE)) |
| |
| #define IS_FIREWALL_VOLATILEDATA_SEGMENT_ADDRESS(ADDRESS) (((ADDRESS) >= SRAM_BASE) && ((ADDRESS) < (SRAM_BASE + SRAM_SIZE_MAX))) |
| #define IS_FIREWALL_VOLATILEDATA_SEGMENT_LENGTH(ADDRESS, LENGTH) (((ADDRESS) + (LENGTH)) <= (SRAM_BASE + SRAM_SIZE_MAX)) |
| |
| |
| #define IS_FIREWALL_VOLATILEDATA_SHARE(SHARE) (((SHARE) == FIREWALL_VOLATILEDATA_NOT_SHARED) || \ |
| ((SHARE) == FIREWALL_VOLATILEDATA_SHARED)) |
| |
| #define IS_FIREWALL_VOLATILEDATA_EXECUTE(EXECUTE) (((EXECUTE) == FIREWALL_VOLATILEDATA_NOT_EXECUTABLE) || \ |
| ((EXECUTE) == FIREWALL_VOLATILEDATA_EXECUTABLE)) |
| /** |
| * @} |
| */ |
| |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup FIREWALL_Exported_Macros FIREWALL Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Check whether the FIREWALL is enabled or not. |
| * @retval FIREWALL enabling status (TRUE or FALSE). |
| */ |
| #define __HAL_FIREWALL_IS_ENABLED() HAL_IS_BIT_CLR(SYSCFG->CFGR2, SYSCFG_CFGR2_FWDISEN) |
| |
| |
| /** @brief Enable FIREWALL pre arm. |
| * @note When FPA bit is set, any code executed outside the protected segment |
| * closes the Firewall, otherwise it generates a system reset. |
| * @note This macro provides the same service as HAL_FIREWALL_EnablePreArmFlag() API |
| * but can be executed inside a code area protected by the Firewall. |
| * @note This macro can be executed whatever the Firewall state (opened or closed) when |
| * NVDSL register is equal to 0. Otherwise (when NVDSL register is different from |
| * 0, that is, when the non volatile data segment is defined), the macro can be |
| * executed only when the Firewall is opened. |
| */ |
| #define __HAL_FIREWALL_PREARM_ENABLE() \ |
| do { \ |
| __IO uint32_t tmpreg; \ |
| SET_BIT(FIREWALL->CR, FW_CR_FPA) ; \ |
| /* Read bit back to ensure it is taken into account by Peripheral */ \ |
| /* (introduce proper delay inside macro execution) */ \ |
| tmpreg = READ_BIT(FIREWALL->CR, FW_CR_FPA) ; \ |
| UNUSED(tmpreg); \ |
| } while(0) |
| |
| |
| |
| /** @brief Disable FIREWALL pre arm. |
| * @note When FPA bit is set, any code executed outside the protected segment |
| * closes the Firewall, otherwise, it generates a system reset. |
| * @note This macro provides the same service as HAL_FIREWALL_DisablePreArmFlag() API |
| * but can be executed inside a code area protected by the Firewall. |
| * @note This macro can be executed whatever the Firewall state (opened or closed) when |
| * NVDSL register is equal to 0. Otherwise (when NVDSL register is different from |
| * 0, that is, when the non volatile data segment is defined), the macro can be |
| * executed only when the Firewall is opened. |
| */ |
| #define __HAL_FIREWALL_PREARM_DISABLE() \ |
| do { \ |
| __IO uint32_t tmpreg; \ |
| CLEAR_BIT(FIREWALL->CR, FW_CR_FPA) ; \ |
| /* Read bit back to ensure it is taken into account by Peripheral */ \ |
| /* (introduce proper delay inside macro execution) */ \ |
| tmpreg = READ_BIT(FIREWALL->CR, FW_CR_FPA) ; \ |
| UNUSED(tmpreg); \ |
| } while(0) |
| |
| /** @brief Enable volatile data sharing in setting VDS bit. |
| * @note When VDS bit is set, the volatile data segment is shared with non-protected |
| * application code. It can be accessed whatever the Firewall state (opened or closed). |
| * @note This macro can be executed inside a code area protected by the Firewall. |
| * @note This macro can be executed whatever the Firewall state (opened or closed) when |
| * NVDSL register is equal to 0. Otherwise (when NVDSL register is different from |
| * 0, that is, when the non volatile data segment is defined), the macro can be |
| * executed only when the Firewall is opened. |
| */ |
| #define __HAL_FIREWALL_VOLATILEDATA_SHARED_ENABLE() \ |
| do { \ |
| __IO uint32_t tmpreg; \ |
| SET_BIT(FIREWALL->CR, FW_CR_VDS) ; \ |
| /* Read bit back to ensure it is taken into account by Peripheral */ \ |
| /* (introduce proper delay inside macro execution) */ \ |
| tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDS) ; \ |
| UNUSED(tmpreg); \ |
| } while(0) |
| |
| /** @brief Disable volatile data sharing in resetting VDS bit. |
| * @note When VDS bit is reset, the volatile data segment is not shared and cannot be |
| * hit by a non protected executable code when the Firewall is closed. If it is |
| * accessed in such a condition, a system reset is generated by the Firewall. |
| * @note This macro can be executed inside a code area protected by the Firewall. |
| * @note This macro can be executed whatever the Firewall state (opened or closed) when |
| * NVDSL register is equal to 0. Otherwise (when NVDSL register is different from |
| * 0, that is, when the non volatile data segment is defined), the macro can be |
| * executed only when the Firewall is opened. |
| */ |
| #define __HAL_FIREWALL_VOLATILEDATA_SHARED_DISABLE() \ |
| do { \ |
| __IO uint32_t tmpreg; \ |
| CLEAR_BIT(FIREWALL->CR, FW_CR_VDS) ; \ |
| /* Read bit back to ensure it is taken into account by Peripheral */ \ |
| /* (introduce proper delay inside macro execution) */ \ |
| tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDS) ; \ |
| UNUSED(tmpreg); \ |
| } while(0) |
| |
| /** @brief Enable volatile data execution in setting VDE bit. |
| * @note VDE bit is ignored when VDS is set. IF VDS = 1, the Volatile data segment can be |
| * executed whatever the VDE bit value. |
| * @note When VDE bit is set (with VDS = 0), the volatile data segment is executable. When |
| * the Firewall call is closed, a "call gate" entry procedure is required to open |
| * first the Firewall. |
| * @note This macro can be executed inside a code area protected by the Firewall. |
| * @note This macro can be executed whatever the Firewall state (opened or closed) when |
| * NVDSL register is equal to 0. Otherwise (when NVDSL register is different from |
| * 0, that is, when the non volatile data segment is defined), the macro can be |
| * executed only when the Firewall is opened. |
| */ |
| #define __HAL_FIREWALL_VOLATILEDATA_EXECUTION_ENABLE() \ |
| do { \ |
| __IO uint32_t tmpreg; \ |
| SET_BIT(FIREWALL->CR, FW_CR_VDE) ; \ |
| /* Read bit back to ensure it is taken into account by Peripheral */ \ |
| /* (introduce proper delay inside macro execution) */ \ |
| tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDE) ; \ |
| UNUSED(tmpreg); \ |
| } while(0) |
| |
| /** @brief Disable volatile data execution in resetting VDE bit. |
| * @note VDE bit is ignored when VDS is set. IF VDS = 1, the Volatile data segment can be |
| * executed whatever the VDE bit value. |
| * @note When VDE bit is reset (with VDS = 0), the volatile data segment cannot be executed. |
| * @note This macro can be executed inside a code area protected by the Firewall. |
| * @note This macro can be executed whatever the Firewall state (opened or closed) when |
| * NVDSL register is equal to 0. Otherwise (when NVDSL register is different from |
| * 0, that is, when the non volatile data segment is defined), the macro can be |
| * executed only when the Firewall is opened. |
| */ |
| #define __HAL_FIREWALL_VOLATILEDATA_EXECUTION_DISABLE() \ |
| do { \ |
| __IO uint32_t tmpreg; \ |
| CLEAR_BIT(FIREWALL->CR, FW_CR_VDE) ; \ |
| /* Read bit back to ensure it is taken into account by Peripheral */ \ |
| /* (introduce proper delay inside macro execution) */ \ |
| tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDE) ; \ |
| UNUSED(tmpreg); \ |
| } while(0) |
| |
| |
| /** @brief Check whether or not the volatile data segment is shared. |
| * @note This macro can be executed inside a code area protected by the Firewall. |
| * @note This macro can be executed whatever the Firewall state (opened or closed) when |
| * NVDSL register is equal to 0. Otherwise (when NVDSL register is different from |
| * 0, that is, when the non volatile data segment is defined), the macro can be |
| * executed only when the Firewall is opened. |
| * @retval VDS bit setting status (TRUE or FALSE). |
| */ |
| #define __HAL_FIREWALL_GET_VOLATILEDATA_SHARED() ((FIREWALL->CR & FW_CR_VDS) == FW_CR_VDS) |
| |
| /** @brief Check whether or not the volatile data segment is declared executable. |
| * @note This macro can be executed inside a code area protected by the Firewall. |
| * @note This macro can be executed whatever the Firewall state (opened or closed) when |
| * NVDSL register is equal to 0. Otherwise (when NVDSL register is different from |
| * 0, that is, when the non volatile data segment is defined), the macro can be |
| * executed only when the Firewall is opened. |
| * @retval VDE bit setting status (TRUE or FALSE). |
| */ |
| #define __HAL_FIREWALL_GET_VOLATILEDATA_EXECUTION() ((FIREWALL->CR & FW_CR_VDE) == FW_CR_VDE) |
| |
| /** @brief Check whether or not the Firewall pre arm bit is set. |
| * @note This macro can be executed inside a code area protected by the Firewall. |
| * @note This macro can be executed whatever the Firewall state (opened or closed) when |
| * NVDSL register is equal to 0. Otherwise (when NVDSL register is different from |
| * 0, that is, when the non volatile data segment is defined), the macro can be |
| * executed only when the Firewall is opened. |
| * @retval FPA bit setting status (TRUE or FALSE). |
| */ |
| #define __HAL_FIREWALL_GET_PREARM() ((FIREWALL->CR & FW_CR_FPA) == FW_CR_FPA) |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| |
| /** @defgroup FIREWALL_Exported_Functions FIREWALL Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup FIREWALL_Exported_Functions_Group1 Initialization Functions |
| * @brief Initialization and Configuration Functions |
| * @{ |
| */ |
| |
| /* Initialization functions ********************************/ |
| HAL_StatusTypeDef HAL_FIREWALL_Config(FIREWALL_InitTypeDef * fw_init); |
| void HAL_FIREWALL_GetConfig(FIREWALL_InitTypeDef * fw_config); |
| void HAL_FIREWALL_EnableFirewall(void); |
| void HAL_FIREWALL_EnablePreArmFlag(void); |
| void HAL_FIREWALL_DisablePreArmFlag(void); |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| /* Define the private group ***********************************/ |
| /**************************************************************/ |
| /** @defgroup FIREWALL_Private FIREWALL Private |
| * @{ |
| */ |
| /** |
| * @} |
| */ |
| /**************************************************************/ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| #endif /* #if !defined (STM32L010xB) && !defined (STM32L010x8) && !defined (STM32L010x6) && !defined (STM32L010x4) && !defined (STM32L011xx) && !defined (STM32L021xx) && !defined (STM32L031xx) && !defined (STM32L041xx) */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32L0xx_HAL_FIREWALL_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
