blob: 71331d3c716fdee6cc2f062a7c4ba3d19e29e201 [file] [log] [blame]
/**
******************************************************************************
* @file stm32l0xx_hal_lptim.h
* @author MCD Application Team
* @brief Header file of LPTIM HAL module.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32L0xx_HAL_LPTIM_H
#define STM32L0xx_HAL_LPTIM_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l0xx_hal_def.h"
/** @addtogroup STM32L0xx_HAL_Driver
* @{
*/
#if defined (LPTIM1)
/** @addtogroup LPTIM
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup LPTIM_Exported_Types LPTIM Exported Types
* @{
*/
#define LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT EXTI_IMR_IM29 /*!< External interrupt line 29 Connected to the LPTIM EXTI Line */
/**
* @brief LPTIM Clock configuration definition
*/
typedef struct
{
uint32_t Source; /*!< Selects the clock source.
This parameter can be a value of @ref LPTIM_Clock_Source */
uint32_t Prescaler; /*!< Specifies the counter clock Prescaler.
This parameter can be a value of @ref LPTIM_Clock_Prescaler */
} LPTIM_ClockConfigTypeDef;
/**
* @brief LPTIM Clock configuration definition
*/
typedef struct
{
uint32_t Polarity; /*!< Selects the polarity of the active edge for the counter unit
if the ULPTIM input is selected.
Note: This parameter is used only when Ultra low power clock source is used.
Note: If the polarity is configured on 'both edges', an auxiliary clock
(one of the Low power oscillator) must be active.
This parameter can be a value of @ref LPTIM_Clock_Polarity */
uint32_t SampleTime; /*!< Selects the clock sampling time to configure the clock glitch filter.
Note: This parameter is used only when Ultra low power clock source is used.
This parameter can be a value of @ref LPTIM_Clock_Sample_Time */
} LPTIM_ULPClockConfigTypeDef;
/**
* @brief LPTIM Trigger configuration definition
*/
typedef struct
{
uint32_t Source; /*!< Selects the Trigger source.
This parameter can be a value of @ref LPTIM_Trigger_Source */
uint32_t ActiveEdge; /*!< Selects the Trigger active edge.
Note: This parameter is used only when an external trigger is used.
This parameter can be a value of @ref LPTIM_External_Trigger_Polarity */
uint32_t SampleTime; /*!< Selects the trigger sampling time to configure the clock glitch filter.
Note: This parameter is used only when an external trigger is used.
This parameter can be a value of @ref LPTIM_Trigger_Sample_Time */
} LPTIM_TriggerConfigTypeDef;
/**
* @brief LPTIM Initialization Structure definition
*/
typedef struct
{
LPTIM_ClockConfigTypeDef Clock; /*!< Specifies the clock parameters */
LPTIM_ULPClockConfigTypeDef UltraLowPowerClock;/*!< Specifies the Ultra Low Power clock parameters */
LPTIM_TriggerConfigTypeDef Trigger; /*!< Specifies the Trigger parameters */
uint32_t OutputPolarity; /*!< Specifies the Output polarity.
This parameter can be a value of @ref LPTIM_Output_Polarity */
uint32_t UpdateMode; /*!< Specifies whether the update of the autoreload and the compare
values is done immediately or after the end of current period.
This parameter can be a value of @ref LPTIM_Updating_Mode */
uint32_t CounterSource; /*!< Specifies whether the counter is incremented each internal event
or each external event.
This parameter can be a value of @ref LPTIM_Counter_Source */
} LPTIM_InitTypeDef;
/**
* @brief HAL LPTIM State structure definition
*/
typedef enum
{
HAL_LPTIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */
HAL_LPTIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */
HAL_LPTIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */
HAL_LPTIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */
HAL_LPTIM_STATE_ERROR = 0x04U /*!< Internal Process is ongoing */
} HAL_LPTIM_StateTypeDef;
/**
* @brief LPTIM handle Structure definition
*/
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
typedef struct __LPTIM_HandleTypeDef
#else
typedef struct
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
{
LPTIM_TypeDef *Instance; /*!< Register base address */
LPTIM_InitTypeDef Init; /*!< LPTIM required parameters */
HAL_StatusTypeDef Status; /*!< LPTIM peripheral status */
HAL_LockTypeDef Lock; /*!< LPTIM locking object */
__IO HAL_LPTIM_StateTypeDef State; /*!< LPTIM peripheral state */
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
void (* MspInitCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< LPTIM Base Msp Init Callback */
void (* MspDeInitCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< LPTIM Base Msp DeInit Callback */
void (* CompareMatchCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Compare match Callback */
void (* AutoReloadMatchCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Auto-reload match Callback */
void (* TriggerCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< External trigger event detection Callback */
void (* CompareWriteCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Compare register write complete Callback */
void (* AutoReloadWriteCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Auto-reload register write complete Callback */
void (* DirectionUpCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Up-counting direction change Callback */
void (* DirectionDownCallback)(struct __LPTIM_HandleTypeDef *hlptim); /*!< Down-counting direction change Callback */
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
} LPTIM_HandleTypeDef;
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
/**
* @brief HAL LPTIM Callback ID enumeration definition
*/
typedef enum
{
HAL_LPTIM_MSPINIT_CB_ID = 0x00U, /*!< LPTIM Base Msp Init Callback ID */
HAL_LPTIM_MSPDEINIT_CB_ID = 0x01U, /*!< LPTIM Base Msp DeInit Callback ID */
HAL_LPTIM_COMPARE_MATCH_CB_ID = 0x02U, /*!< Compare match Callback ID */
HAL_LPTIM_AUTORELOAD_MATCH_CB_ID = 0x03U, /*!< Auto-reload match Callback ID */
HAL_LPTIM_TRIGGER_CB_ID = 0x04U, /*!< External trigger event detection Callback ID */
HAL_LPTIM_COMPARE_WRITE_CB_ID = 0x05U, /*!< Compare register write complete Callback ID */
HAL_LPTIM_AUTORELOAD_WRITE_CB_ID = 0x06U, /*!< Auto-reload register write complete Callback ID */
HAL_LPTIM_DIRECTION_UP_CB_ID = 0x07U, /*!< Up-counting direction change Callback ID */
HAL_LPTIM_DIRECTION_DOWN_CB_ID = 0x08U, /*!< Down-counting direction change Callback ID */
} HAL_LPTIM_CallbackIDTypeDef;
/**
* @brief HAL TIM Callback pointer definition
*/
typedef void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim); /*!< pointer to the LPTIM callback function */
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup LPTIM_Exported_Constants LPTIM Exported Constants
* @{
*/
/** @defgroup LPTIM_Clock_Source LPTIM Clock Source
* @{
*/
#define LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC 0x00000000U
#define LPTIM_CLOCKSOURCE_ULPTIM LPTIM_CFGR_CKSEL
/**
* @}
*/
/** @defgroup LPTIM_Clock_Prescaler LPTIM Clock Prescaler
* @{
*/
#define LPTIM_PRESCALER_DIV1 0x00000000U
#define LPTIM_PRESCALER_DIV2 LPTIM_CFGR_PRESC_0
#define LPTIM_PRESCALER_DIV4 LPTIM_CFGR_PRESC_1
#define LPTIM_PRESCALER_DIV8 (LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_1)
#define LPTIM_PRESCALER_DIV16 LPTIM_CFGR_PRESC_2
#define LPTIM_PRESCALER_DIV32 (LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_2)
#define LPTIM_PRESCALER_DIV64 (LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_2)
#define LPTIM_PRESCALER_DIV128 LPTIM_CFGR_PRESC
/**
* @}
*/
/** @defgroup LPTIM_Output_Polarity LPTIM Output Polarity
* @{
*/
#define LPTIM_OUTPUTPOLARITY_HIGH 0x00000000U
#define LPTIM_OUTPUTPOLARITY_LOW LPTIM_CFGR_WAVPOL
/**
* @}
*/
/** @defgroup LPTIM_Clock_Sample_Time LPTIM Clock Sample Time
* @{
*/
#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION 0x00000000U
#define LPTIM_CLOCKSAMPLETIME_2TRANSITIONS LPTIM_CFGR_CKFLT_0
#define LPTIM_CLOCKSAMPLETIME_4TRANSITIONS LPTIM_CFGR_CKFLT_1
#define LPTIM_CLOCKSAMPLETIME_8TRANSITIONS LPTIM_CFGR_CKFLT
/**
* @}
*/
/** @defgroup LPTIM_Clock_Polarity LPTIM Clock Polarity
* @{
*/
#define LPTIM_CLOCKPOLARITY_RISING 0x00000000U
#define LPTIM_CLOCKPOLARITY_FALLING LPTIM_CFGR_CKPOL_0
#define LPTIM_CLOCKPOLARITY_RISING_FALLING LPTIM_CFGR_CKPOL_1
/**
* @}
*/
/** @defgroup LPTIM_Trigger_Source LPTIM Trigger Source
* @{
*/
#define LPTIM_TRIGSOURCE_SOFTWARE 0x0000FFFFU
#define LPTIM_TRIGSOURCE_0 0x00000000U
#define LPTIM_TRIGSOURCE_1 LPTIM_CFGR_TRIGSEL_0
#define LPTIM_TRIGSOURCE_2 LPTIM_CFGR_TRIGSEL_1
#define LPTIM_TRIGSOURCE_3 (LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_1)
#define LPTIM_TRIGSOURCE_4 LPTIM_CFGR_TRIGSEL_2
#define LPTIM_TRIGSOURCE_5 (LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_2)
#define LPTIM_TRIGSOURCE_6 (LPTIM_CFGR_TRIGSEL_1 | LPTIM_CFGR_TRIGSEL_2)
#define LPTIM_TRIGSOURCE_7 LPTIM_CFGR_TRIGSEL
/**
* @}
*/
/** @defgroup LPTIM_External_Trigger_Polarity LPTIM External Trigger Polarity
* @{
*/
#define LPTIM_ACTIVEEDGE_RISING LPTIM_CFGR_TRIGEN_0
#define LPTIM_ACTIVEEDGE_FALLING LPTIM_CFGR_TRIGEN_1
#define LPTIM_ACTIVEEDGE_RISING_FALLING LPTIM_CFGR_TRIGEN
/**
* @}
*/
/** @defgroup LPTIM_Trigger_Sample_Time LPTIM Trigger Sample Time
* @{
*/
#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION 0x00000000U
#define LPTIM_TRIGSAMPLETIME_2TRANSITIONS LPTIM_CFGR_TRGFLT_0
#define LPTIM_TRIGSAMPLETIME_4TRANSITIONS LPTIM_CFGR_TRGFLT_1
#define LPTIM_TRIGSAMPLETIME_8TRANSITIONS LPTIM_CFGR_TRGFLT
/**
* @}
*/
/** @defgroup LPTIM_Updating_Mode LPTIM Updating Mode
* @{
*/
#define LPTIM_UPDATE_IMMEDIATE 0x00000000U
#define LPTIM_UPDATE_ENDOFPERIOD LPTIM_CFGR_PRELOAD
/**
* @}
*/
/** @defgroup LPTIM_Counter_Source LPTIM Counter Source
* @{
*/
#define LPTIM_COUNTERSOURCE_INTERNAL 0x00000000U
#define LPTIM_COUNTERSOURCE_EXTERNAL LPTIM_CFGR_COUNTMODE
/**
* @}
*/
/** @defgroup LPTIM_Flag_Definition LPTIM Flags Definition
* @{
*/
#define LPTIM_FLAG_DOWN LPTIM_ISR_DOWN
#define LPTIM_FLAG_UP LPTIM_ISR_UP
#define LPTIM_FLAG_ARROK LPTIM_ISR_ARROK
#define LPTIM_FLAG_CMPOK LPTIM_ISR_CMPOK
#define LPTIM_FLAG_EXTTRIG LPTIM_ISR_EXTTRIG
#define LPTIM_FLAG_ARRM LPTIM_ISR_ARRM
#define LPTIM_FLAG_CMPM LPTIM_ISR_CMPM
/**
* @}
*/
/** @defgroup LPTIM_Interrupts_Definition LPTIM Interrupts Definition
* @{
*/
#define LPTIM_IT_DOWN LPTIM_IER_DOWNIE
#define LPTIM_IT_UP LPTIM_IER_UPIE
#define LPTIM_IT_ARROK LPTIM_IER_ARROKIE
#define LPTIM_IT_CMPOK LPTIM_IER_CMPOKIE
#define LPTIM_IT_EXTTRIG LPTIM_IER_EXTTRIGIE
#define LPTIM_IT_ARRM LPTIM_IER_ARRMIE
#define LPTIM_IT_CMPM LPTIM_IER_CMPMIE
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup LPTIM_Exported_Macros LPTIM Exported Macros
* @{
*/
/** @brief Reset LPTIM handle state.
* @param __HANDLE__ LPTIM handle
* @retval None
*/
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) do { \
(__HANDLE__)->State = HAL_LPTIM_STATE_RESET; \
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
} while(0)
#else
#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET)
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
/**
* @brief Enable the LPTIM peripheral.
* @param __HANDLE__ LPTIM handle
* @retval None
*/
#define __HAL_LPTIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (LPTIM_CR_ENABLE))
/**
* @brief Disable the LPTIM peripheral.
* @param __HANDLE__ LPTIM handle
* @note The following sequence is required to solve LPTIM disable HW limitation.
* Please check Errata Sheet ES0335 for more details under "MCU may remain
* stuck in LPTIM interrupt when entering Stop mode" section.
* @note Please call @ref HAL_LPTIM_GetState() after a call to __HAL_LPTIM_DISABLE to
* check for TIMEOUT.
* @retval None
*/
#define __HAL_LPTIM_DISABLE(__HANDLE__) LPTIM_Disable(__HANDLE__)
/**
* @brief Start the LPTIM peripheral in Continuous mode.
* @param __HANDLE__ LPTIM handle
* @retval None
*/
#define __HAL_LPTIM_START_CONTINUOUS(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_CNTSTRT)
/**
* @brief Start the LPTIM peripheral in single mode.
* @param __HANDLE__ LPTIM handle
* @retval None
*/
#define __HAL_LPTIM_START_SINGLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_SNGSTRT)
/**
* @brief Write the passed parameter in the Autoreload register.
* @param __HANDLE__ LPTIM handle
* @param __VALUE__ Autoreload value
* @retval None
* @note The ARR register can only be modified when the LPTIM instance is enabled.
*/
#define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->ARR = (__VALUE__))
/**
* @brief Write the passed parameter in the Compare register.
* @param __HANDLE__ LPTIM handle
* @param __VALUE__ Compare value
* @retval None
* @note The CMP register can only be modified when the LPTIM instance is enabled.
*/
#define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->CMP = (__VALUE__))
/**
* @brief Check whether the specified LPTIM flag is set or not.
* @param __HANDLE__ LPTIM handle
* @param __FLAG__ LPTIM flag to check
* This parameter can be a value of:
* @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.
* @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.
* @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.
* @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.
* @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
* @arg LPTIM_FLAG_ARRM : Autoreload match Flag.
* @arg LPTIM_FLAG_CMPM : Compare match Flag.
* @retval The state of the specified flag (SET or RESET).
*/
#define __HAL_LPTIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR &(__FLAG__)) == (__FLAG__))
/**
* @brief Clear the specified LPTIM flag.
* @param __HANDLE__ LPTIM handle.
* @param __FLAG__ LPTIM flag to clear.
* This parameter can be a value of:
* @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.
* @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.
* @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.
* @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.
* @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
* @arg LPTIM_FLAG_ARRM : Autoreload match Flag.
* @arg LPTIM_FLAG_CMPM : Compare match Flag.
* @retval None.
*/
#define __HAL_LPTIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
/**
* @brief Enable the specified LPTIM interrupt.
* @param __HANDLE__ LPTIM handle.
* @param __INTERRUPT__ LPTIM interrupt to set.
* This parameter can be a value of:
* @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
* @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
* @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
* @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
* @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
* @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
* @arg LPTIM_IT_CMPM : Compare match Interrupt.
* @retval None.
* @note The LPTIM interrupts can only be enabled when the LPTIM instance is disabled.
*/
#define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
/**
* @brief Disable the specified LPTIM interrupt.
* @param __HANDLE__ LPTIM handle.
* @param __INTERRUPT__ LPTIM interrupt to set.
* This parameter can be a value of:
* @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
* @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
* @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
* @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
* @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
* @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
* @arg LPTIM_IT_CMPM : Compare match Interrupt.
* @retval None.
* @note The LPTIM interrupts can only be disabled when the LPTIM instance is disabled.
*/
#define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
/**
* @brief Check whether the specified LPTIM interrupt source is enabled or not.
* @param __HANDLE__ LPTIM handle.
* @param __INTERRUPT__ LPTIM interrupt to check.
* This parameter can be a value of:
* @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
* @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
* @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
* @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
* @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
* @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
* @arg LPTIM_IT_CMPM : Compare match Interrupt.
* @retval Interrupt status.
*/
#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER\
& (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/**
* @brief Enable interrupt on the LPTIM Wake-up Timer associated Exti line.
* @retval None
*/
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR\
|= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
/**
* @brief Disable interrupt on the LPTIM Wake-up Timer associated Exti line.
* @retval None
*/
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR\
&= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))
/**
* @brief Enable event on the LPTIM Wake-up Timer associated Exti line.
* @retval None.
*/
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR\
|= LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT)
/**
* @brief Disable event on the LPTIM Wake-up Timer associated Exti line.
* @retval None.
*/
#define __HAL_LPTIM_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR\
&= ~(LPTIM_EXTI_LINE_WAKEUPTIMER_EVENT))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions
* @{
*/
/** @addtogroup LPTIM_Exported_Functions_Group1
* @brief Initialization and Configuration functions.
* @{
*/
/* Initialization/de-initialization functions ********************************/
HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim);
HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim);
/* MSP functions *************************************************************/
void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim);
void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim);
/**
* @}
*/
/** @addtogroup LPTIM_Exported_Functions_Group2
* @brief Start-Stop operation functions.
* @{
*/
/* Start/Stop operation functions *********************************************/
/* ################################# PWM Mode ################################*/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim);
/* ############################# One Pulse Mode ##############################*/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim);
/* ############################## Set once Mode ##############################*/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim);
/* ############################### Encoder Mode ##############################*/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim);
/* ############################# Time out Mode ##############################*/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim);
/* ############################## Counter Mode ###############################*/
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim);
/**
* @}
*/
/** @addtogroup LPTIM_Exported_Functions_Group3
* @brief Read operation functions.
* @{
*/
/* Reading operation functions ************************************************/
uint32_t HAL_LPTIM_ReadCounter(const LPTIM_HandleTypeDef *hlptim);
uint32_t HAL_LPTIM_ReadAutoReload(const LPTIM_HandleTypeDef *hlptim);
uint32_t HAL_LPTIM_ReadCompare(const LPTIM_HandleTypeDef *hlptim);
/**
* @}
*/
/** @addtogroup LPTIM_Exported_Functions_Group4
* @brief LPTIM IRQ handler and callback functions.
* @{
*/
/* LPTIM IRQ functions *******************************************************/
void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim);
/* CallBack functions ********************************************************/
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim);
void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim);
void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim);
void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim);
void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim);
void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim);
void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim);
/* Callbacks Register/UnRegister functions ***********************************/
#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID,
pLPTIM_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
/**
* @}
*/
/** @addtogroup LPTIM_Group5
* @brief Peripheral State functions.
* @{
*/
/* Peripheral State functions ************************************************/
HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/** @defgroup LPTIM_Private_Types LPTIM Private Types
* @{
*/
/**
* @}
*/
/* Private variables ---------------------------------------------------------*/
/** @defgroup LPTIM_Private_Variables LPTIM Private Variables
* @{
*/
/**
* @}
*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup LPTIM_Private_Constants LPTIM Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup LPTIM_Private_Macros LPTIM Private Macros
* @{
*/
#define IS_LPTIM_CLOCK_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_CLOCKSOURCE_ULPTIM) || \
((__SOURCE__) == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC))
#define IS_LPTIM_CLOCK_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LPTIM_PRESCALER_DIV1 ) || \
((__PRESCALER__) == LPTIM_PRESCALER_DIV2 ) || \
((__PRESCALER__) == LPTIM_PRESCALER_DIV4 ) || \
((__PRESCALER__) == LPTIM_PRESCALER_DIV8 ) || \
((__PRESCALER__) == LPTIM_PRESCALER_DIV16 ) || \
((__PRESCALER__) == LPTIM_PRESCALER_DIV32 ) || \
((__PRESCALER__) == LPTIM_PRESCALER_DIV64 ) || \
((__PRESCALER__) == LPTIM_PRESCALER_DIV128))
#define IS_LPTIM_CLOCK_PRESCALERDIV1(__PRESCALER__) ((__PRESCALER__) == LPTIM_PRESCALER_DIV1)
#define IS_LPTIM_OUTPUT_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_OUTPUTPOLARITY_LOW ) || \
((__POLARITY__) == LPTIM_OUTPUTPOLARITY_HIGH))
#define IS_LPTIM_CLOCK_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION) || \
((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_2TRANSITIONS) || \
((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_4TRANSITIONS) || \
((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_8TRANSITIONS))
#define IS_LPTIM_CLOCK_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING) || \
((__POLARITY__) == LPTIM_CLOCKPOLARITY_FALLING) || \
((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING_FALLING))
#define IS_LPTIM_TRG_SOURCE(__TRIG__) (((__TRIG__) == LPTIM_TRIGSOURCE_SOFTWARE) || \
((__TRIG__) == LPTIM_TRIGSOURCE_0) || \
((__TRIG__) == LPTIM_TRIGSOURCE_1) || \
((__TRIG__) == LPTIM_TRIGSOURCE_2) || \
((__TRIG__) == LPTIM_TRIGSOURCE_3) || \
((__TRIG__) == LPTIM_TRIGSOURCE_4) || \
((__TRIG__) == LPTIM_TRIGSOURCE_5) || \
((__TRIG__) == LPTIM_TRIGSOURCE_6) || \
((__TRIG__) == LPTIM_TRIGSOURCE_7))
#define IS_LPTIM_EXT_TRG_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_ACTIVEEDGE_RISING ) || \
((__POLARITY__) == LPTIM_ACTIVEEDGE_FALLING ) || \
((__POLARITY__) == LPTIM_ACTIVEEDGE_RISING_FALLING ))
#define IS_LPTIM_TRIG_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION) || \
((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_2TRANSITIONS ) || \
((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_4TRANSITIONS ) || \
((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_8TRANSITIONS ))
#define IS_LPTIM_UPDATE_MODE(__MODE__) (((__MODE__) == LPTIM_UPDATE_IMMEDIATE) || \
((__MODE__) == LPTIM_UPDATE_ENDOFPERIOD))
#define IS_LPTIM_COUNTER_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_COUNTERSOURCE_INTERNAL) || \
((__SOURCE__) == LPTIM_COUNTERSOURCE_EXTERNAL))
#define IS_LPTIM_AUTORELOAD(__AUTORELOAD__) ((__AUTORELOAD__) <= 0x0000FFFFUL)
#define IS_LPTIM_COMPARE(__COMPARE__) ((__COMPARE__) <= 0x0000FFFFUL)
#define IS_LPTIM_PERIOD(__PERIOD__) ((__PERIOD__) <= 0x0000FFFFUL)
#define IS_LPTIM_PULSE(__PULSE__) ((__PULSE__) <= 0x0000FFFFUL)
/**
* @}
*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup LPTIM_Private_Functions LPTIM Private Functions
* @{
*/
void LPTIM_Disable(LPTIM_HandleTypeDef *hlptim);
/**
* @}
*/
/**
* @}
*/
#endif /* LPTIM1 */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32L0xx_HAL_LPTIM_H */