blob: b291cc44e6f773944e390b41f49e80dbadb599ed [file] [log] [blame]
/**
******************************************************************************
* @file stm32l0xx_hal_cryp.h
* @author MCD Application Team
* @brief Header file of CRYP HAL module.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L0xx_HAL_CRYP_H
#define __STM32L0xx_HAL_CRYP_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined (STM32L021xx) || defined (STM32L041xx) || defined (STM32L062xx) || defined (STM32L063xx) || defined (STM32L081xx) || defined (STM32L082xx) || defined (STM32L083xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32l0xx_hal_def.h"
/** @addtogroup STM32L0xx_HAL_Driver
* @{
*/
/** @defgroup CRYP CRYP
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup CRYP_Exported_Types CRYP Exported Types
* @{
*/
/**
* @brief CRYP Configuration Structure definition
*/
typedef struct
{
uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
This parameter can be a value of @ref CRYP_Data_Type */
uint8_t* pKey; /*!< The key used for encryption/decryption */
uint8_t* pInitVect; /*!< The initialization vector used also as initialization
counter in CTR mode */
}CRYP_InitTypeDef;
/**
* @brief HAL CRYP State structures definition
*/
typedef enum
{
HAL_CRYP_STATE_RESET = 0x00U, /*!< CRYP not yet initialized or disabled */
HAL_CRYP_STATE_READY = 0x01U, /*!< CRYP initialized and ready for use */
HAL_CRYP_STATE_BUSY = 0x02U, /*!< CRYP internal processing is ongoing */
HAL_CRYP_STATE_TIMEOUT = 0x03U, /*!< CRYP timeout state */
HAL_CRYP_STATE_ERROR = 0x04U /*!< CRYP error state */
}HAL_CRYP_STATETypeDef;
/**
* @brief HAL CRYP phase structures definition
*/
typedef enum
{
HAL_CRYP_PHASE_READY = 0x01U, /*!< CRYP peripheral is ready for initialization. */
HAL_CRYP_PHASE_PROCESS = 0x02U, /*!< CRYP peripheral is in processing phase */
}HAL_PhaseTypeDef;
/**
* @brief CRYP handle Structure definition
*/
typedef struct
{
AES_TypeDef *Instance; /*!< Register base address */
CRYP_InitTypeDef Init; /*!< CRYP required parameters */
uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
__IO uint16_t CrypInCount; /*!< Counter of inputted data */
__IO uint16_t CrypOutCount; /*!< Counter of outputted data */
HAL_StatusTypeDef Status; /*!< CRYP peripheral status */
HAL_PhaseTypeDef Phase; /*!< CRYP peripheral phase */
DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */
DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */
HAL_LockTypeDef Lock; /*!< CRYP locking object */
__IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */
}CRYP_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CRYP_Exported_Constants CRYP Exported Constants
* @{
*/
/** @defgroup CRYP_Data_Type CRYP Data Type
* @{
*/
#define CRYP_DATATYPE_32B (0x00000000U)
#define CRYP_DATATYPE_16B AES_CR_DATATYPE_0
#define CRYP_DATATYPE_8B AES_CR_DATATYPE_1
#define CRYP_DATATYPE_1B AES_CR_DATATYPE
#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DATATYPE_32B) || \
((DATATYPE) == CRYP_DATATYPE_16B) || \
((DATATYPE) == CRYP_DATATYPE_8B) || \
((DATATYPE) == CRYP_DATATYPE_1B))
/**
* @}
*/
/** @defgroup CRYP_AlgoModeDirection CRYP Algo Mode Direction
* @{
*/
#define CRYP_CR_ALGOMODE_DIRECTION (uint32_t)(AES_CR_MODE|AES_CR_CHMOD)
#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT (0x00000000U)
#define CRYP_CR_ALGOMODE_AES_ECB_KEYDERDECRYPT (AES_CR_MODE)
#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT (AES_CR_CHMOD_0)
#define CRYP_CR_ALGOMODE_AES_CBC_KEYDERDECRYPT ((uint32_t)(AES_CR_CHMOD_0|AES_CR_MODE))
#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT (AES_CR_CHMOD_1)
#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT ((uint32_t)(AES_CR_CHMOD_1 | AES_CR_MODE_1))
/**
* @}
*/
/** @defgroup CRYP_AES_Interrupts AES Interrupts
* @{
*/
#define CRYP_IT_CC AES_CR_CCIE /*!< Computation Complete interrupt */
#define CRYP_IT_ERR AES_CR_ERRIE /*!< Error interrupt */
/**
* @}
*/
/** @defgroup CRYP_AES_Flags AES Flags
* @{
*/
#define CRYP_FLAG_CCF AES_SR_CCF /*!< Computation Complete Flag */
#define CRYP_FLAG_RDERR AES_SR_RDERR /*!< Read Error Flag */
#define CRYP_FLAG_WRERR AES_SR_WRERR /*!< Write Error Flag */
/**
* @}
*/
/** @defgroup CRYP_AES_Clear_Flags AES Clear Flags
* @{
*/
#define CRYP_CLEARFLAG_CCF AES_CR_CCFC /*!< Computation Complete Flag Clear */
#define CRYP_CLEARFLAG_RDERR AES_CR_ERRC /*!< Read Error Clear */
#define CRYP_CLEARFLAG_WRERR AES_CR_ERRC /*!< Write Error Clear */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup CRYP_Exported_Macros CRYP Exported Macros
* @{
*/
/** @brief Reset CRYP handle state
* @param __HANDLE__ specifies the CRYP handle.
* @retval None
*/
#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
/**
* @brief Enable/Disable the CRYP peripheral.
* @param __HANDLE__ specifies the CRYP handle.
* @retval None
*/
#define __HAL_CRYP_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, AES_CR_EN)
#define __HAL_CRYP_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, AES_CR_EN)
/**
* @brief Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC,...
* @param __HANDLE__ specifies the CRYP handle.
* @param __MODE__ The algorithm mode.
* @retval None
*/
#define __HAL_CRYP_SET_MODE(__HANDLE__,__MODE__) SET_BIT((__HANDLE__)->Instance->CR, (__MODE__))
/** @brief Check whether the specified CRYP flag is set or not.
* @param __HANDLE__ specifies the CRYP handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg CRYP_FLAG_CCF : Computation Complete Flag
* @arg CRYP_FLAG_RDERR : Read Error Flag
* @arg CRYP_FLAG_WRERR : Write Error Flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_CRYP_GET_FLAG(__HANDLE__,__FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
/** @brief Clear the CRYP pending flag.
* @param __HANDLE__ specifies the CRYP handle.
* @param __FLAG__ specifies the flag to clear.
* This parameter can be one of the following values:
* @arg CRYP_CLEARFLAG_CCF : Computation Complete Clear Flag
* @arg CRYP_CLEARFLAG_RDERR : Read Error Clear
* @arg CRYP_CLEARFLAG_WRERR : Write Error Clear
* @retval None
*/
#define __HAL_CRYP_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT((__HANDLE__)->Instance->CR, (__FLAG__))
/**
* @brief Enable the CRYP interrupt.
* @param __HANDLE__ specifies the CRYP handle.
* @param __INTERRUPT__ CRYP Interrupt.
* @retval None
*/
#define __HAL_CRYP_ENABLE_IT(__HANDLE__,__INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
/**
* @brief Disable the CRYP interrupt.
* @param __HANDLE__ specifies the CRYP handle.
* @param __INTERRUPT__ CRYP interrupt.
* @retval None
*/
#define __HAL_CRYP_DISABLE_IT(__HANDLE__,__INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
/** @brief Checks if the specified CRYP interrupt source is enabled or disabled.
* @param __HANDLE__ specifies the CRYP handle.
* @param __INTERRUPT__ CRYP interrupt source to check
* This parameter can be one of the following values:
* @arg CRYP_IT_CC : Computation Complete interrupt
* @arg CRYP_IT_ERR : Error interrupt (used for RDERR and WRERR)
* @retval State of interruption (SET or RESET)
*/
#define __HAL_CRYP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
(( ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__) \
)? SET : RESET \
)
/** @brief Clear the CRYP pending IT.
* @param __HANDLE__ specifies the CRYP handle.
* @param __IT__ specifies the IT to clear.
* This parameter can be one of the following values:
* @arg CRYP_CLEARFLAG_CCF : Computation Complete Clear Flag
* @arg CRYP_CLEARFLAG_RDERR : Read Error Clear
* @arg CRYP_CLEARFLAG_WRERR : Write Error Clear
* @retval None
*/
#define __HAL_CRYP_CLEAR_IT(__HANDLE__, __IT__) SET_BIT((__HANDLE__)->Instance->CR, (__IT__))
/**
* @}
*/
/* Include CRYP HAL Extension module */
#include "stm32l0xx_hal_cryp_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @defgroup CRYP_Exported_Functions CRYP Exported Functions
* @{
*/
/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization/de-initialization functions *********************************/
HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
/* MSP functions *************************************************************/
void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
/**
* @}
*/
/** @defgroup CRYP_Exported_Functions_Group2 AES processing functions
* @{
*/
/* AES encryption/decryption using polling ***********************************/
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
/* AES encryption/decryption using interrupt *********************************/
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
/* AES encryption/decryption using DMA ***************************************/
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
/**
* @}
*/
/** @addtogroup CRYP_Exported_Functions_Group3 DMA callback functions
* @{
*/
/* CallBack functions ********************************************************/
void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
/**
* @}
*/
/** @defgroup CRYP_Exported_Functions_Group4 CRYP IRQ handler
* @{
*/
/* Processing functions ********************************************************/
void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
/**
* @}
*/
/** @defgroup CRYP_Exported_Functions_Group5 Peripheral State functions
* @{
*/
/* Peripheral State functions **************************************************/
HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
/**
* @}
*/
/**
* @}
*/
/* Define the private group ***********************************/
/**************************************************************/
/** @defgroup CRYP_Private CRYP Private
* @{
*/
/**
* @}
*/
/**************************************************************/
/**
* @}
*/
/**
* @}
*/
#endif /* STM32L021xx || STM32L041xx || STM32L062xx || STM32L063xx || STM32L081xx || STM32L082xx || STM32L083xx */
#ifdef __cplusplus
}
#endif
#endif /* __STM32L0xx_HAL_CRYP_H */