blob: 27e28880d81a002388f5230c8212a2a5d39c6d0a [file] [log] [blame]
/**
******************************************************************************
* @file stm32l0xx_hal_firewall.h
* @author MCD Application Team
* @brief Header file of FIREWALL HAL module.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L0xx_HAL_FIREWALL_H
#define __STM32L0xx_HAL_FIREWALL_H
#ifdef __cplusplus
extern "C" {
#endif
#if !defined (STM32L010xB) && !defined (STM32L010x8) && !defined (STM32L010x6) && !defined (STM32L010x4) && !defined (STM32L011xx) && !defined (STM32L021xx) && !defined (STM32L031xx) && !defined (STM32L041xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32l0xx_hal_def.h"
/** @addtogroup STM32L0xx_HAL_Driver
* @{
*/
/** @defgroup FIREWALL FIREWALL
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup FIREWALL_Exported_Types FIREWALL Exported Types
* @{
*/
/**
* @brief FIREWALL Initialization Structure definition
*/
typedef struct
{
uint32_t CodeSegmentStartAddress; /*!< Protected code segment start address. This value is 24-bit long, the 8 LSB bits are
reserved and forced to 0 in order to allow a 256-byte granularity. */
uint32_t CodeSegmentLength; /*!< Protected code segment length in bytes. This value is 22-bit long, the 8 LSB bits are
reserved and forced to 0 for the length to be a multiple of 256 bytes. */
uint32_t NonVDataSegmentStartAddress; /*!< Protected non-volatile data segment start address. This value is 24-bit long, the 8 LSB
bits are reserved and forced to 0 in order to allow a 256-byte granularity. */
uint32_t NonVDataSegmentLength; /*!< Protected non-volatile data segment length in bytes. This value is 22-bit long, the 8 LSB
bits are reserved and forced to 0 for the length to be a multiple of 256 bytes. */
uint32_t VDataSegmentStartAddress; /*!< Protected volatile data segment start address. This value is 17-bit long, the 6 LSB bits
are reserved and forced to 0 in order to allow a 64-byte granularity. */
uint32_t VDataSegmentLength; /*!< Protected volatile data segment length in bytes. This value is 17-bit long, the 6 LSB
bits are reserved and forced to 0 for the length to be a multiple of 64 bytes. */
uint32_t VolatileDataExecution; /*!< Set VDE bit specifying whether or not the volatile data segment can be executed.
When VDS = 1 (set by parameter VolatileDataShared), VDE bit has no meaning.
This parameter can be a value of @ref FIREWALL_VolatileData_Executable */
uint32_t VolatileDataShared; /*!< Set VDS bit in specifying whether or not the volatile data segment can be shared with a
non-protected application code.
This parameter can be a value of @ref FIREWALL_VolatileData_Shared */
}FIREWALL_InitTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup FIREWALL_Exported_Constants FIREWALL Exported Constants
* @{
*/
/** @defgroup FIREWALL_VolatileData_Executable FIREWALL volatile data segment execution status
* @{
*/
#define FIREWALL_VOLATILEDATA_NOT_EXECUTABLE (0x0000U)
#define FIREWALL_VOLATILEDATA_EXECUTABLE FW_CR_VDE
/**
* @}
*/
/** @defgroup FIREWALL_VolatileData_Shared FIREWALL volatile data segment share status
* @{
*/
#define FIREWALL_VOLATILEDATA_NOT_SHARED (0x0000U)
#define FIREWALL_VOLATILEDATA_SHARED FW_CR_VDS
/**
* @}
*/
/** @defgroup FIREWALL_Pre_Arm FIREWALL pre arm status
* @{
*/
#define FIREWALL_PRE_ARM_RESET (0x0000U)
#define FIREWALL_PRE_ARM_SET FW_CR_FPA
/**
* @}
*/
/**
* @}
*/
/* Private macros --------------------------------------------------------*/
/** @addtogroup FIREWALL_Private
* @{
*/
#define IS_FIREWALL_CODE_SEGMENT_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) < (FLASH_BASE + FLASH_SIZE)))
#define IS_FIREWALL_CODE_SEGMENT_LENGTH(ADDRESS, LENGTH) (((ADDRESS) + (LENGTH)) <= (FLASH_BASE + FLASH_SIZE))
#define IS_FIREWALL_NONVOLATILEDATA_SEGMENT_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) < (FLASH_BASE + FLASH_SIZE)))
#define IS_FIREWALL_NONVOLATILEDATA_SEGMENT_LENGTH(ADDRESS, LENGTH) (((ADDRESS) + (LENGTH)) <= (FLASH_BASE + FLASH_SIZE))
#define IS_FIREWALL_VOLATILEDATA_SEGMENT_ADDRESS(ADDRESS) (((ADDRESS) >= SRAM_BASE) && ((ADDRESS) < (SRAM_BASE + SRAM_SIZE_MAX)))
#define IS_FIREWALL_VOLATILEDATA_SEGMENT_LENGTH(ADDRESS, LENGTH) (((ADDRESS) + (LENGTH)) <= (SRAM_BASE + SRAM_SIZE_MAX))
#define IS_FIREWALL_VOLATILEDATA_SHARE(SHARE) (((SHARE) == FIREWALL_VOLATILEDATA_NOT_SHARED) || \
((SHARE) == FIREWALL_VOLATILEDATA_SHARED))
#define IS_FIREWALL_VOLATILEDATA_EXECUTE(EXECUTE) (((EXECUTE) == FIREWALL_VOLATILEDATA_NOT_EXECUTABLE) || \
((EXECUTE) == FIREWALL_VOLATILEDATA_EXECUTABLE))
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup FIREWALL_Exported_Macros FIREWALL Exported Macros
* @{
*/
/** @brief Check whether the FIREWALL is enabled or not.
* @retval FIREWALL enabling status (TRUE or FALSE).
*/
#define __HAL_FIREWALL_IS_ENABLED() HAL_IS_BIT_CLR(SYSCFG->CFGR2, SYSCFG_CFGR2_FWDISEN)
/** @brief Enable FIREWALL pre arm.
* @note When FPA bit is set, any code executed outside the protected segment
* closes the Firewall, otherwise it generates a system reset.
* @note This macro provides the same service as HAL_FIREWALL_EnablePreArmFlag() API
* but can be executed inside a code area protected by the Firewall.
* @note This macro can be executed whatever the Firewall state (opened or closed) when
* NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
* 0, that is, when the non volatile data segment is defined), the macro can be
* executed only when the Firewall is opened.
*/
#define __HAL_FIREWALL_PREARM_ENABLE() \
do { \
__IO uint32_t tmpreg; \
SET_BIT(FIREWALL->CR, FW_CR_FPA) ; \
/* Read bit back to ensure it is taken into account by Peripheral */ \
/* (introduce proper delay inside macro execution) */ \
tmpreg = READ_BIT(FIREWALL->CR, FW_CR_FPA) ; \
UNUSED(tmpreg); \
} while(0)
/** @brief Disable FIREWALL pre arm.
* @note When FPA bit is set, any code executed outside the protected segment
* closes the Firewall, otherwise, it generates a system reset.
* @note This macro provides the same service as HAL_FIREWALL_DisablePreArmFlag() API
* but can be executed inside a code area protected by the Firewall.
* @note This macro can be executed whatever the Firewall state (opened or closed) when
* NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
* 0, that is, when the non volatile data segment is defined), the macro can be
* executed only when the Firewall is opened.
*/
#define __HAL_FIREWALL_PREARM_DISABLE() \
do { \
__IO uint32_t tmpreg; \
CLEAR_BIT(FIREWALL->CR, FW_CR_FPA) ; \
/* Read bit back to ensure it is taken into account by Peripheral */ \
/* (introduce proper delay inside macro execution) */ \
tmpreg = READ_BIT(FIREWALL->CR, FW_CR_FPA) ; \
UNUSED(tmpreg); \
} while(0)
/** @brief Enable volatile data sharing in setting VDS bit.
* @note When VDS bit is set, the volatile data segment is shared with non-protected
* application code. It can be accessed whatever the Firewall state (opened or closed).
* @note This macro can be executed inside a code area protected by the Firewall.
* @note This macro can be executed whatever the Firewall state (opened or closed) when
* NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
* 0, that is, when the non volatile data segment is defined), the macro can be
* executed only when the Firewall is opened.
*/
#define __HAL_FIREWALL_VOLATILEDATA_SHARED_ENABLE() \
do { \
__IO uint32_t tmpreg; \
SET_BIT(FIREWALL->CR, FW_CR_VDS) ; \
/* Read bit back to ensure it is taken into account by Peripheral */ \
/* (introduce proper delay inside macro execution) */ \
tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDS) ; \
UNUSED(tmpreg); \
} while(0)
/** @brief Disable volatile data sharing in resetting VDS bit.
* @note When VDS bit is reset, the volatile data segment is not shared and cannot be
* hit by a non protected executable code when the Firewall is closed. If it is
* accessed in such a condition, a system reset is generated by the Firewall.
* @note This macro can be executed inside a code area protected by the Firewall.
* @note This macro can be executed whatever the Firewall state (opened or closed) when
* NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
* 0, that is, when the non volatile data segment is defined), the macro can be
* executed only when the Firewall is opened.
*/
#define __HAL_FIREWALL_VOLATILEDATA_SHARED_DISABLE() \
do { \
__IO uint32_t tmpreg; \
CLEAR_BIT(FIREWALL->CR, FW_CR_VDS) ; \
/* Read bit back to ensure it is taken into account by Peripheral */ \
/* (introduce proper delay inside macro execution) */ \
tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDS) ; \
UNUSED(tmpreg); \
} while(0)
/** @brief Enable volatile data execution in setting VDE bit.
* @note VDE bit is ignored when VDS is set. IF VDS = 1, the Volatile data segment can be
* executed whatever the VDE bit value.
* @note When VDE bit is set (with VDS = 0), the volatile data segment is executable. When
* the Firewall call is closed, a "call gate" entry procedure is required to open
* first the Firewall.
* @note This macro can be executed inside a code area protected by the Firewall.
* @note This macro can be executed whatever the Firewall state (opened or closed) when
* NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
* 0, that is, when the non volatile data segment is defined), the macro can be
* executed only when the Firewall is opened.
*/
#define __HAL_FIREWALL_VOLATILEDATA_EXECUTION_ENABLE() \
do { \
__IO uint32_t tmpreg; \
SET_BIT(FIREWALL->CR, FW_CR_VDE) ; \
/* Read bit back to ensure it is taken into account by Peripheral */ \
/* (introduce proper delay inside macro execution) */ \
tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDE) ; \
UNUSED(tmpreg); \
} while(0)
/** @brief Disable volatile data execution in resetting VDE bit.
* @note VDE bit is ignored when VDS is set. IF VDS = 1, the Volatile data segment can be
* executed whatever the VDE bit value.
* @note When VDE bit is reset (with VDS = 0), the volatile data segment cannot be executed.
* @note This macro can be executed inside a code area protected by the Firewall.
* @note This macro can be executed whatever the Firewall state (opened or closed) when
* NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
* 0, that is, when the non volatile data segment is defined), the macro can be
* executed only when the Firewall is opened.
*/
#define __HAL_FIREWALL_VOLATILEDATA_EXECUTION_DISABLE() \
do { \
__IO uint32_t tmpreg; \
CLEAR_BIT(FIREWALL->CR, FW_CR_VDE) ; \
/* Read bit back to ensure it is taken into account by Peripheral */ \
/* (introduce proper delay inside macro execution) */ \
tmpreg = READ_BIT(FIREWALL->CR, FW_CR_VDE) ; \
UNUSED(tmpreg); \
} while(0)
/** @brief Check whether or not the volatile data segment is shared.
* @note This macro can be executed inside a code area protected by the Firewall.
* @note This macro can be executed whatever the Firewall state (opened or closed) when
* NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
* 0, that is, when the non volatile data segment is defined), the macro can be
* executed only when the Firewall is opened.
* @retval VDS bit setting status (TRUE or FALSE).
*/
#define __HAL_FIREWALL_GET_VOLATILEDATA_SHARED() ((FIREWALL->CR & FW_CR_VDS) == FW_CR_VDS)
/** @brief Check whether or not the volatile data segment is declared executable.
* @note This macro can be executed inside a code area protected by the Firewall.
* @note This macro can be executed whatever the Firewall state (opened or closed) when
* NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
* 0, that is, when the non volatile data segment is defined), the macro can be
* executed only when the Firewall is opened.
* @retval VDE bit setting status (TRUE or FALSE).
*/
#define __HAL_FIREWALL_GET_VOLATILEDATA_EXECUTION() ((FIREWALL->CR & FW_CR_VDE) == FW_CR_VDE)
/** @brief Check whether or not the Firewall pre arm bit is set.
* @note This macro can be executed inside a code area protected by the Firewall.
* @note This macro can be executed whatever the Firewall state (opened or closed) when
* NVDSL register is equal to 0. Otherwise (when NVDSL register is different from
* 0, that is, when the non volatile data segment is defined), the macro can be
* executed only when the Firewall is opened.
* @retval FPA bit setting status (TRUE or FALSE).
*/
#define __HAL_FIREWALL_GET_PREARM() ((FIREWALL->CR & FW_CR_FPA) == FW_CR_FPA)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup FIREWALL_Exported_Functions FIREWALL Exported Functions
* @{
*/
/** @defgroup FIREWALL_Exported_Functions_Group1 Initialization Functions
* @brief Initialization and Configuration Functions
* @{
*/
/* Initialization functions ********************************/
HAL_StatusTypeDef HAL_FIREWALL_Config(FIREWALL_InitTypeDef * fw_init);
void HAL_FIREWALL_GetConfig(FIREWALL_InitTypeDef * fw_config);
void HAL_FIREWALL_EnableFirewall(void);
void HAL_FIREWALL_EnablePreArmFlag(void);
void HAL_FIREWALL_DisablePreArmFlag(void);
/**
* @}
*/
/**
* @}
*/
/* Define the private group ***********************************/
/**************************************************************/
/** @defgroup FIREWALL_Private FIREWALL Private
* @{
*/
/**
* @}
*/
/**************************************************************/
/**
* @}
*/
/**
* @}
*/
#endif /* #if !defined (STM32L010xB) && !defined (STM32L010x8) && !defined (STM32L010x6) && !defined (STM32L010x4) && !defined (STM32L011xx) && !defined (STM32L021xx) && !defined (STM32L031xx) && !defined (STM32L041xx) */
#ifdef __cplusplus
}
#endif
#endif /* __STM32L0xx_HAL_FIREWALL_H */