| /** |
| ****************************************************************************** |
| * @file stm32l0xx_ll_bus.h |
| * @author MCD Application Team |
| * @brief Header file of BUS LL module. |
| |
| @verbatim |
| ##### RCC Limitations ##### |
| ============================================================================== |
| [..] |
| A delay between an RCC peripheral clock enable and the effective peripheral |
| enabling should be taken into account in order to manage the peripheral read/write |
| from/to registers. |
| (+) This delay depends on the peripheral mapping. |
| (++) AHB & APB peripherals, 1 dummy read is necessary |
| |
| [..] |
| Workarounds: |
| (#) For AHB & APB peripherals, a dummy read to the peripheral register has been |
| inserted in each LL_{BUS}_GRP{x}_EnableClock() function. |
| |
| @endverbatim |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file in |
| * the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32L0xx_LL_BUS_H |
| #define __STM32L0xx_LL_BUS_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32l0xx.h" |
| |
| /** @addtogroup STM32L0xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined(RCC) |
| |
| /** @defgroup BUS_LL BUS |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup BUS_LL_Exported_Constants BUS Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN /*!< DMA1 clock enable */ |
| #define LL_AHB1_GRP1_PERIPH_MIF RCC_AHBENR_MIFEN /*!< MIF clock enable */ |
| #define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBSMENR_SRAMSMEN /*!< Sleep Mode SRAM clock enable */ |
| #define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN /*!< CRC clock enable */ |
| #if defined(TSC) |
| #define LL_AHB1_GRP1_PERIPH_TSC RCC_AHBENR_TSCEN /*!< TSC clock enable */ |
| #endif /*TSC*/ |
| #if defined(RNG) |
| #define LL_AHB1_GRP1_PERIPH_RNG RCC_AHBENR_RNGEN /*!< RNG clock enable */ |
| #endif /*RNG*/ |
| #if defined(AES) |
| #define LL_AHB1_GRP1_PERIPH_CRYP RCC_AHBENR_CRYPEN /*!< CRYP clock enable */ |
| #endif /*AES*/ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN /*!< TIM2 clock enable */ |
| #if defined(TIM3) |
| #define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN /*!< TIM3 clock enable */ |
| #endif |
| #if defined(TIM6) |
| #define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN /*!< TIM6 clock enable */ |
| #endif |
| #if defined(TIM7) |
| #define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN /*!< TIM7 clock enable */ |
| #endif |
| #if defined(LCD) |
| #define LL_APB1_GRP1_PERIPH_LCD RCC_APB1ENR_LCDEN /*!< LCD clock enable */ |
| #endif /*LCD*/ |
| #define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN /*!< WWDG clock enable */ |
| #if defined(SPI2) |
| #define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN /*!< SPI2 clock enable */ |
| #endif |
| #define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN /*!< USART2 clock enable */ |
| #define LL_APB1_GRP1_PERIPH_LPUART1 RCC_APB1ENR_LPUART1EN /*!< LPUART1 clock enable */ |
| #if defined(USART4) |
| #define LL_APB1_GRP1_PERIPH_USART4 RCC_APB1ENR_USART4EN /*!< USART4 clock enable */ |
| #endif |
| #if defined(USART5) |
| #define LL_APB1_GRP1_PERIPH_USART5 RCC_APB1ENR_USART5EN /*!< USART5 clock enable */ |
| #endif |
| #define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN /*!< I2C1 clock enable */ |
| #if defined(I2C2) |
| #define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN /*!< I2C2 clock enable */ |
| #endif |
| #if defined(USB) |
| #define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN /*!< USB clock enable */ |
| #endif /*USB*/ |
| #if defined(CRS) |
| #define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR_CRSEN /*!< CRS clock enable */ |
| #endif /*CRS*/ |
| #define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN /*!< PWR clock enable */ |
| #if defined(DAC) |
| #define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN /*!< DAC clock enable */ |
| #endif |
| #if defined(I2C3) |
| #define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR_I2C3EN /*!< I2C3 clock enable */ |
| #endif |
| #define LL_APB1_GRP1_PERIPH_LPTIM1 RCC_APB1ENR_LPTIM1EN /*!< LPTIM1 clock enable */ |
| /** |
| * @} |
| */ |
| |
| |
| |
| |
| /** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN /*!< SYSCFG clock enable */ |
| #define LL_APB2_GRP1_PERIPH_TIM21 RCC_APB2ENR_TIM21EN /*!< TIM21 clock enable */ |
| #if defined(TIM22) |
| #define LL_APB2_GRP1_PERIPH_TIM22 RCC_APB2ENR_TIM22EN /*!< TIM22 clock enable */ |
| #endif |
| #define LL_APB2_GRP1_PERIPH_FW RCC_APB2ENR_FWEN /*!< FireWall clock enable */ |
| #define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN /*!< ADC1 clock enable */ |
| #define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN /*!< SPI1 clock enable */ |
| #if defined(USART1) |
| #define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN /*!< USART1 clock enable */ |
| #endif |
| #define LL_APB2_GRP1_PERIPH_DBGMCU RCC_APB2ENR_DBGMCUEN /*!< DBGMCU clock enable */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| |
| /** @defgroup BUS_LL_EC_IOP_GRP1_PERIPH IOP GRP1 PERIPH |
| * @{ |
| */ |
| #define LL_IOP_GRP1_PERIPH_ALL 0xFFFFFFFFU |
| #define LL_IOP_GRP1_PERIPH_GPIOA RCC_IOPENR_GPIOAEN /*!< GPIO port A control */ |
| #define LL_IOP_GRP1_PERIPH_GPIOB RCC_IOPENR_GPIOBEN /*!< GPIO port B control */ |
| #define LL_IOP_GRP1_PERIPH_GPIOC RCC_IOPENR_GPIOCEN /*!< GPIO port C control */ |
| #if defined(GPIOD) |
| #define LL_IOP_GRP1_PERIPH_GPIOD RCC_IOPENR_GPIODEN /*!< GPIO port D control */ |
| #endif /*GPIOD*/ |
| #if defined(GPIOE) |
| #define LL_IOP_GRP1_PERIPH_GPIOE RCC_IOPENR_GPIOEEN /*!< GPIO port H control */ |
| #endif /*GPIOE*/ |
| #if defined(GPIOH) |
| #define LL_IOP_GRP1_PERIPH_GPIOH RCC_IOPENR_GPIOHEN /*!< GPIO port H control */ |
| #endif /*GPIOH*/ |
| /** |
| * @} |
| */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup BUS_LL_Exported_Functions BUS Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup BUS_LL_EF_AHB1 AHB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable AHB1 peripherals clock. |
| * @rmtoll AHBENR DMAEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR MIFEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR TSCEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR RNGEN LL_AHB1_GRP1_EnableClock\n |
| * AHBENR CRYPEN LL_AHB1_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_MIF |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHBENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHBENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if AHB1 peripheral clock is enabled or not |
| * @rmtoll AHBENR DMAEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR MIFEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR TSCEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR RNGEN LL_AHB1_GRP1_IsEnabledClock\n |
| * AHBENR CRYPEN LL_AHB1_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_MIF |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->AHBENR, Periphs) == (Periphs)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable AHB1 peripherals clock. |
| * @rmtoll AHBENR DMAEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR MIFEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR TSCEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR RNGEN LL_AHB1_GRP1_DisableClock\n |
| * AHBENR CRYPEN LL_AHB1_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_MIF |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHBENR, Periphs); |
| } |
| |
| /** |
| * @brief Force AHB1 peripherals reset. |
| * @rmtoll AHBRSTR DMARST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR MIFRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR CRCRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR TSCRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR RNGRST LL_AHB1_GRP1_ForceReset\n |
| * AHBRSTR CRYPRST LL_AHB1_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_MIF |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->AHBRSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release AHB1 peripherals reset. |
| * @rmtoll AHBRSTR DMARST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR MIFRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR TSCRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR RNGRST LL_AHB1_GRP1_ReleaseReset\n |
| * AHBRSTR CRYPRST LL_AHB1_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_MIF |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHBRSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable AHB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHBSMENR DMASMEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBSMENR MIFSMEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBSMENR SRAMSMEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBSMENR CRCSMEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBSMENR TSCSMEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBSMENR RNGSMEN LL_AHB1_GRP1_EnableClockSleep\n |
| * AHBSMENR CRYPSMEN LL_AHB1_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_MIF |
| * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->AHBSMENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->AHBSMENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable AHB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll AHBSMENR DMASMEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBSMENR MIFSMEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBSMENR SRAMSMEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBSMENR CRCSMEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBSMENR TSCSMEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBSMENR RNGSMEN LL_AHB1_GRP1_DisableClockSleep\n |
| * AHBSMENR CRYPSMEN LL_AHB1_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1 |
| * @arg @ref LL_AHB1_GRP1_PERIPH_MIF |
| * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRC |
| * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_RNG (*) |
| * @arg @ref LL_AHB1_GRP1_PERIPH_CRYP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_AHB1_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->AHBSMENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB1 APB1 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable APB1 peripherals clock. |
| * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR LCDEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR LPUART1EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR USART4EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR USART5EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR USBEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR CRSEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR I2C3EN LL_APB1_GRP1_EnableClock\n |
| * APB1ENR LPTIM1EN LL_APB1_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if APB1 peripheral clock is enabled or not |
| * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR LCDEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR LPUART1EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR USART4EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR USART5EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR CRSEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n |
| * APB1ENR LPTIM1EN LL_APB1_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * |
| * (*) value not defined in all devices. |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB1ENR, Periphs) == (Periphs)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable APB1 peripherals clock. |
| * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR LCDEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR LPUART1EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR USART4EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR USART5EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR USBEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR CRSEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR I2C3EN LL_APB1_GRP1_DisableClock\n |
| * APB1ENR LPTIM1EN LL_APB1_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force APB1 peripherals reset. |
| * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR LCDRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR LPUART1RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR USART4RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR USART5RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR CRSRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR I2C3RST LL_APB1_GRP1_ForceReset\n |
| * APB1RSTR LPTIM1RST LL_APB1_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB1RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release APB1 peripherals reset. |
| * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR LCDRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR LPUART1RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR USART4RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR USART5RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR CRSRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n |
| * APB1RSTR LPTIM1RST LL_APB1_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1SMENR TIM2SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR TIM3SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR TIM6SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR TIM7SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR LCDSMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR WWDGSMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR SPI2SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR USART2SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR LPUART1SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR USART4SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR USART5SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR I2C1SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR I2C2SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR USBSMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR CRSSMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR PWRSMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR DACSMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR I2C3SMEN LL_APB1_GRP1_EnableClockSleep\n |
| * APB1SMENR LPTIM1SMEN LL_APB1_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB1SMENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB1SMENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable APB1 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB1SMENR TIM2SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR TIM3SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR TIM6SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR TIM7SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR LCDSMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR WWDGSMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR SPI2SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR USART2SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR LPUART1SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR USART4SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR USART5SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR I2C1SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR I2C2SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR USBSMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR CRSSMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR PWRSMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR DACSMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR I2C3SMEN LL_APB1_GRP1_DisableClockSleep\n |
| * APB1SMENR LPTIM1SMEN LL_APB1_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LCD (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_WWDG |
| * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART2 |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPUART1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C1 |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_USB (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_PWR |
| * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_I2C3 (*) |
| * @arg @ref LL_APB1_GRP1_PERIPH_LPTIM1 |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB1_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB1SMENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup BUS_LL_EF_APB2 APB2 |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable APB2 peripherals clock. |
| * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM21EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR TIM22EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR FWEN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR ADCEN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n |
| * APB2ENR DBGEN LL_APB2_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM21 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM22 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_FW |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DBGMCU |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB2ENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB2ENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if APB2 peripheral clock is enabled or not |
| * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM21EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR TIM22EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR FWEN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR ADCEN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n |
| * APB2ENR DBGEN LL_APB2_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM21 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM22 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_FW |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DBGMCU |
| * |
| * (*) value not defined in all devices. |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->APB2ENR, Periphs) == (Periphs)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable APB2 peripherals clock. |
| * @rmtoll APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM21EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR TIM22EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR FWEN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR ADCEN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n |
| * APB2ENR DBGEN LL_APB2_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM21 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM22 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_FW |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DBGMCU |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2ENR, Periphs); |
| } |
| |
| /** |
| * @brief Force APB2 peripherals reset. |
| * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM21RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR TIM22RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR ADCRST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n |
| * APB2RSTR DBGRST LL_APB2_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM21 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM22 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DBGMCU |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->APB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release APB2 peripherals reset. |
| * @rmtoll APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM21RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR TIM22RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR ADCRST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n |
| * APB2RSTR DBGRST LL_APB2_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_ALL |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM21 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM22 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DBGMCU |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2RSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable APB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2SMENR TIM21SMEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2SMENR TIM22SMEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2SMENR ADCSMEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2SMENR SPI1SMEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2SMENR USART1SMEN LL_APB2_GRP1_EnableClockSleep\n |
| * APB2SMENR DBGSMEN LL_APB2_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM21 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM22 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DBGMCU |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->APB2SMENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->APB2SMENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable APB2 peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll APB2SMENR SYSCFGSMEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2SMENR TIM21SMEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2SMENR TIM22SMEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2SMENR ADCSMEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2SMENR SPI1SMEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2SMENR USART1SMEN LL_APB2_GRP1_DisableClockSleep\n |
| * APB2SMENR DBGSMEN LL_APB2_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM21 |
| * @arg @ref LL_APB2_GRP1_PERIPH_TIM22 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_ADC1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_SPI1 |
| * @arg @ref LL_APB2_GRP1_PERIPH_USART1 (*) |
| * @arg @ref LL_APB2_GRP1_PERIPH_DBGMCU |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_APB2_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->APB2SMENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| /** @defgroup BUS_LL_EF_IOP IOP |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable IOP peripherals clock. |
| * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_EnableClock\n |
| * IOPENR GPIOBEN LL_IOP_GRP1_EnableClock\n |
| * IOPENR GPIOCEN LL_IOP_GRP1_EnableClock\n |
| * IOPENR GPIODEN LL_IOP_GRP1_EnableClock\n |
| * IOPENR GPIOEEN LL_IOP_GRP1_EnableClock\n |
| * IOPENR GPIOHEN LL_IOP_GRP1_EnableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOH (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_IOP_GRP1_EnableClock(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->IOPENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->IOPENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Check if IOP peripheral clock is enabled or not |
| * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_IsEnabledClock\n |
| * IOPENR GPIOBEN LL_IOP_GRP1_IsEnabledClock\n |
| * IOPENR GPIOCEN LL_IOP_GRP1_IsEnabledClock\n |
| * IOPENR GPIODEN LL_IOP_GRP1_IsEnabledClock\n |
| * IOPENR GPIOEEN LL_IOP_GRP1_IsEnabledClock\n |
| * IOPENR GPIOHEN LL_IOP_GRP1_IsEnabledClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOH (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval State of Periphs (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_IOP_GRP1_IsEnabledClock(uint32_t Periphs) |
| { |
| return ((READ_BIT(RCC->IOPENR, Periphs) == (Periphs)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Disable IOP peripherals clock. |
| * @rmtoll IOPENR GPIOAEN LL_IOP_GRP1_DisableClock\n |
| * IOPENR GPIOBEN LL_IOP_GRP1_DisableClock\n |
| * IOPENR GPIOCEN LL_IOP_GRP1_DisableClock\n |
| * IOPENR GPIODEN LL_IOP_GRP1_DisableClock\n |
| * IOPENR GPIOEEN LL_IOP_GRP1_DisableClock\n |
| * IOPENR GPIOHEN LL_IOP_GRP1_DisableClock |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOH (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_IOP_GRP1_DisableClock(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->IOPENR, Periphs); |
| } |
| |
| /** |
| * @brief Disable IOP peripherals clock. |
| * @rmtoll IOPRSTR GPIOASMEN LL_IOP_GRP1_ForceReset\n |
| * IOPRSTR GPIOBSMEN LL_IOP_GRP1_ForceReset\n |
| * IOPRSTR GPIOCSMEN LL_IOP_GRP1_ForceReset\n |
| * IOPRSTR GPIODSMEN LL_IOP_GRP1_ForceReset\n |
| * IOPRSTR GPIOESMEN LL_IOP_GRP1_ForceReset\n |
| * IOPRSTR GPIOHSMEN LL_IOP_GRP1_ForceReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_IOP_GRP1_PERIPH_ALL |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOH (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_IOP_GRP1_ForceReset(uint32_t Periphs) |
| { |
| SET_BIT(RCC->IOPRSTR, Periphs); |
| } |
| |
| /** |
| * @brief Release IOP peripherals reset. |
| * @rmtoll IOPRSTR GPIOASMEN LL_IOP_GRP1_ReleaseReset\n |
| * IOPRSTR GPIOBSMEN LL_IOP_GRP1_ReleaseReset\n |
| * IOPRSTR GPIOCSMEN LL_IOP_GRP1_ReleaseReset\n |
| * IOPRSTR GPIODSMEN LL_IOP_GRP1_ReleaseReset\n |
| * IOPRSTR GPIOESMEN LL_IOP_GRP1_ReleaseReset\n |
| * IOPRSTR GPIOHSMEN LL_IOP_GRP1_ReleaseReset |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_IOP_GRP1_PERIPH_ALL |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOH (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_IOP_GRP1_ReleaseReset(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->IOPRSTR, Periphs); |
| } |
| |
| /** |
| * @brief Enable IOP peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll IOPSMENR GPIOARST LL_IOP_GRP1_EnableClockSleep\n |
| * IOPSMENR GPIOBRST LL_IOP_GRP1_EnableClockSleep\n |
| * IOPSMENR GPIOCRST LL_IOP_GRP1_EnableClockSleep\n |
| * IOPSMENR GPIODRST LL_IOP_GRP1_EnableClockSleep\n |
| * IOPSMENR GPIOERST LL_IOP_GRP1_EnableClockSleep\n |
| * IOPSMENR GPIOHRST LL_IOP_GRP1_EnableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOH (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_IOP_GRP1_EnableClockSleep(uint32_t Periphs) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(RCC->IOPSMENR, Periphs); |
| /* Delay after an RCC peripheral clock enabling */ |
| tmpreg = READ_BIT(RCC->IOPSMENR, Periphs); |
| (void)tmpreg; |
| } |
| |
| /** |
| * @brief Disable IOP peripherals clock during Low Power (Sleep) mode. |
| * @rmtoll IOPSMENR GPIOARST LL_IOP_GRP1_DisableClockSleep\n |
| * IOPSMENR GPIOBRST LL_IOP_GRP1_DisableClockSleep\n |
| * IOPSMENR GPIOCRST LL_IOP_GRP1_DisableClockSleep\n |
| * IOPSMENR GPIODRST LL_IOP_GRP1_DisableClockSleep\n |
| * IOPSMENR GPIOERST LL_IOP_GRP1_DisableClockSleep\n |
| * IOPSMENR GPIOHRST LL_IOP_GRP1_DisableClockSleep |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOA |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOB |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOC |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOD (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOE (*) |
| * @arg @ref LL_IOP_GRP1_PERIPH_GPIOH (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_IOP_GRP1_DisableClockSleep(uint32_t Periphs) |
| { |
| CLEAR_BIT(RCC->IOPSMENR, Periphs); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* defined(RCC) */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32L0xx_LL_BUS_H */ |
| |
