Src/stm32l0xx_hal_smartcard_ex.c

/**
  ******************************************************************************
  * @file    stm32l0xx_hal_smartcard_ex.c
  * @author  MCD Application Team
  * @brief   SMARTCARD HAL module driver.
  *          This file provides extended firmware functions to manage the following
  *          functionalities of the SmartCard.
  *           + Initialization and de-initialization functions
  *           + Peripheral Control functions
  *
  @verbatim
  =============================================================================
               ##### SMARTCARD peripheral extended features  #####
  =============================================================================
  [..]
  The Extended SMARTCARD HAL driver can be used as follows:

    (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(),
        then program SMARTCARD advanced features if required (TX/RX pins swap, TimeOut,
        auto-retry counter,...) in the hsmartcard AdvancedInit structure.
  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

#if !defined (STM32L010x4) && !defined (STM32L010x6)
/* Includes ------------------------------------------------------------------*/
#include "stm32l0xx_hal.h"

/** @addtogroup STM32L0xx_HAL_Driver
  * @{
  */

/** @defgroup SMARTCARDEx SMARTCARDEx
  * @brief SMARTCARD Extended HAL module driver
  * @{
  */
#ifdef HAL_SMARTCARD_MODULE_ENABLED

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup SMARTCARDEx_Exported_Functions  SMARTCARD Extended Exported Functions
  * @{
  */

/** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions
  * @brief    Extended control functions
  *
@verbatim
  ===============================================================================
                      ##### Peripheral Control functions #####
  ===============================================================================
  [..]
  This subsection provides a set of functions allowing to initialize the SMARTCARD.
     (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly
     (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly
     (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature
     (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature

@endverbatim
  * @{
  */

/** @brief Update on the fly the SMARTCARD block length in RTOR register.
  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                    the configuration information for the specified SMARTCARD module.
  * @param BlockLength SMARTCARD block length (8-bit long at most)
  * @retval None
  */
void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength)
{
  MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << USART_RTOR_BLEN_Pos));
}

/** @brief Update on the fly the receiver timeout value in RTOR register.
  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                    the configuration information for the specified SMARTCARD module.
  * @param TimeOutValue receiver timeout value in number of baud blocks. The timeout
  *                     value must be less or equal to 0x0FFFFFFFF.
  * @retval None
  */
void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue)
{
  assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue));
  MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue);
}

/** @brief Enable the SMARTCARD receiver timeout feature.
  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                    the configuration information for the specified SMARTCARD module.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)
{
  if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
  {
    /* Process Locked */
    __HAL_LOCK(hsmartcard);

    hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;

    /* Set the USART RTOEN bit */
    SET_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN);

    hsmartcard->gState = HAL_SMARTCARD_STATE_READY;

    /* Process Unlocked */
    __HAL_UNLOCK(hsmartcard);

    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;
  }
}

/** @brief Disable the SMARTCARD receiver timeout feature.
  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                    the configuration information for the specified SMARTCARD module.
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)
{
  if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
  {
    /* Process Locked */
    __HAL_LOCK(hsmartcard);

    hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;

    /* Clear the USART RTOEN bit */
    CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN);

    hsmartcard->gState = HAL_SMARTCARD_STATE_READY;

    /* Process Unlocked */
    __HAL_UNLOCK(hsmartcard);

    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;
  }
}

/**
  * @}
  */

/** @defgroup SMARTCARDEx_Exported_Functions_Group2 Extended Peripheral IO operation functions
  * @brief   SMARTCARD Transmit and Receive functions
  *
@verbatim
 ===============================================================================
                      ##### IO operation functions #####
 ===============================================================================
    [..]
@endverbatim
  * @{
  */

/**
  * @}
  */

/** @defgroup SMARTCARD_Exported_Functions_Group3 Extended Peripheral Peripheral Control functions
  *  @brief   SMARTCARD control functions
  *
@verbatim
 ===============================================================================
                      ##### Peripheral Control functions #####
 ===============================================================================
    [..]
@endverbatim
  * @{
  */


/**
  * @}
  */

/**
  * @}
  */

/** @defgroup SMARTCARDEx_Private_Functions  SMARTCARD Extended private Functions
  * @{
  */

/**
  * @}
  */

#endif /* HAL_SMARTCARD_MODULE_ENABLED */

/**
  * @}
  */

/**
  * @}
  */
#endif /* !defined (STM32L010x4) && !defined (STM32L010x6) */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/