lib/rt-thread/tusb_config.h

/*
 * The MIT License (MIT)
 *
 * Copyright (c) 2019 Ha Thach (tinyusb.org)
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
 * This file is part of the TinyUSB stack.
 */

#ifndef TUSB_CONFIG_H_
#define TUSB_CONFIG_H_

#ifdef __RTTHREAD__
#include <rtconfig.h>

#ifdef __cplusplus
extern "C" {
#endif

//--------------------------------------------------------------------
// COMMON CONFIGURATION
//--------------------------------------------------------------------

#if   defined(SOC_SERIES_STM32F0)
#define CFG_TUSB_MCU    OPT_MCU_STM32F0
#elif defined(SOC_SERIES_STM32F1)
#define CFG_TUSB_MCU    OPT_MCU_STM32F1
#elif defined(SOC_SERIES_STM32F2)
#define CFG_TUSB_MCU    OPT_MCU_STM32F2
#elif defined(SOC_SERIES_STM32F3)
#define CFG_TUSB_MCU    OPT_MCU_STM32F3
#elif defined(SOC_SERIES_STM32F4)
#define CFG_TUSB_MCU    OPT_MCU_STM32F4
#elif defined(SOC_SERIES_STM32F7)
#define CFG_TUSB_MCU    OPT_MCU_STM32F7
#elif defined(SOC_SERIES_STM32H7)
#define CFG_TUSB_MCU    OPT_MCU_STM32H7
#elif defined(SOC_SERIES_STM32L0)
#define CFG_TUSB_MCU    OPT_MCU_STM32L0
#elif defined(SOC_SERIES_STM32L1)
#define CFG_TUSB_MCU    OPT_MCU_STM32L1
#elif defined(SOC_SERIES_STM32L4)
#define CFG_TUSB_MCU    OPT_MCU_STM32L4
#elif defined(SOC_NRF52840)
#define CFG_TUSB_MCU    OPT_MCU_NRF5X
#elif defined(SOC_HPM6000)
#define CFG_TUSB_MCU    OPT_MCU_HPM
#elif defined(SOC_RP2040)
#define CFG_TUSB_MCU    OPT_MCU_RP2040
#elif defined(SOC_FAMILY_RENESAS)
#define CFG_TUSB_MCU    OPT_MCU_RAXXX
#else
#error "Not support for current MCU"
#endif

#define CFG_TUSB_OS OPT_OS_RTTHREAD

//--------------------------------------------------------------------
// DEBUG CONFIGURATION
//--------------------------------------------------------------------
#ifdef CFG_TUSB_DEBUG
#define CFG_TUSB_DEBUG_PRINTF rt_kprintf
#endif /* CFG_TUSB_DEBUG */

#ifndef BOARD_DEVICE_RHPORT_NUM
#define BOARD_DEVICE_RHPORT_NUM     PKG_TINYUSB_RHPORT_NUM
#endif

#ifndef BOARD_DEVICE_RHPORT_SPEED
#define BOARD_DEVICE_RHPORT_SPEED   PKG_TINYUSB_DEVICE_PORT_SPEED
#endif

#if   BOARD_DEVICE_RHPORT_NUM == 0
#define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
#elif BOARD_DEVICE_RHPORT_NUM == 1
#define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
#else
  #error "Incorrect RHPort configuration"
#endif

/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
 * Tinyusb use follows macros to declare transferring memory so that they can be put
 * into those specific section.
 * e.g
 * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
 * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
 */
#ifndef CFG_TUSB_MEM_SECTION
#define CFG_TUSB_MEM_SECTION        rt_section(PKG_TINYUSB_MEM_SECTION)
#endif

#ifndef CFG_TUSB_MEM_ALIGN
#define CFG_TUSB_MEM_ALIGN          rt_align(PKG_TINYUSB_MEM_ALIGN)
#endif

//--------------------------------------------------------------------
// DEVICE CONFIGURATION
//--------------------------------------------------------------------
#if defined(PKG_TINYUSB_DEVICE_ENABLE)
  #define CFG_TUD_ENABLED             (1)
#else
  #define CFG_TUD_ENABLED             (0)
#endif

#ifndef CFG_TUD_ENDPOINT0_SIZE
#define CFG_TUD_ENDPOINT0_SIZE        PKG_TINYUSB_EDPT0_SIZE
#endif

// CDC FIFO size of TX and RX
#define CFG_TUD_CDC_RX_BUFSIZE        PKG_TINYUSB_DEVICE_CDC_RX_BUFSIZE
#define CFG_TUD_CDC_TX_BUFSIZE        PKG_TINYUSB_DEVICE_CDC_TX_BUFSIZE

#define CFG_TUD_MSC_EP_BUFSIZE        PKG_TINYUSB_DEVICE_MSC_EP_BUFSIZE

#define CFG_TUD_HID_EP_BUFSIZE        PKG_TINYUSB_DEVICE_HID_EP_BUFSIZE

#ifndef PKG_TINYUSB_DEVICE_CDC_STRING
#define PKG_TINYUSB_DEVICE_CDC_STRING ""
#endif

#ifndef PKG_TINYUSB_DEVICE_MSC_STRING
#define PKG_TINYUSB_DEVICE_MSC_STRING ""
#endif

#ifndef PKG_TINYUSB_DEVICE_HID_STRING
#define PKG_TINYUSB_DEVICE_HID_STRING ""
#endif

//--------------------------------------------------------------------
// HOST CONFIGURATION
//--------------------------------------------------------------------
#if defined(PKG_TINYUSB_HOST_ENABLE)
  #define CFG_TUH_ENABLED             (1)
#else
  #define CFG_TUH_ENABLED             (0)
#endif

#if (PKG_TINYUSB_HOST_PORT == 0) && defined(PKG_TINYUSB_HOST_ENABLE)
#undef CFG_TUSB_RHPORT0_MODE
#define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_HOST | PKG_TINYUSB_HOST_PORT_SPEED)
#endif

#if (PKG_TINYUSB_HOST_PORT == 1) && defined(PKG_TINYUSB_HOST_ENABLE)
#undef CFG_TUSB_RHPORT1_MODE
#define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_HOST | PKG_TINYUSB_HOST_PORT_SPEED)
#endif

#define BOARD_TUH_RHPORT            PKG_TINYUSB_HOST_PORT // FULL SPEED
#define BOARD_TUH_MAX_SPEED         PKG_TINYUSB_HOST_PORT_SPEED
// Default is max speed that hardware controller could support with on-chip PHY
#define CFG_TUH_MAX_SPEED           BOARD_TUH_MAX_SPEED

//------------------------- Board Specific --------------------------

// RHPort number used for host can be defined by board.mk, default to port 0
#ifndef BOARD_TUH_RHPORT
#define BOARD_TUH_RHPORT      0
#endif

// RHPort max operational speed can defined by board.mk
#ifndef BOARD_TUH_MAX_SPEED
#define BOARD_TUH_MAX_SPEED   OPT_MODE_DEFAULT_SPEED
#endif

// Size of buffer to hold descriptors and other data used for enumeration
#define CFG_TUH_ENUMERATION_BUFSIZE 256

#define CFG_TUH_HUB                 2 // number of supported hubs
#define CFG_TUH_CDC                 0 // CDC ACM
#define CFG_TUH_CDC_FTDI            0 // FTDI Serial.  FTDI is not part of CDC class, only to re-use CDC driver API
#define CFG_TUH_CDC_CP210X          0 // CP210x Serial. CP210X is not part of CDC class, only to re-use CDC driver API
#define CFG_TUH_CDC_CH34X           0 // CH340 or CH341 Serial. CH34X is not part of CDC class, only to re-use CDC driver API
#define CFG_TUH_HID                 0 // typical keyboard + mouse device can have 3-4 HID interfaces
#define CFG_TUH_MSC                 0
//#define CFG_TUH_VENDOR              3

// max device support (excluding hub device): 1 hub typically has 4 ports
#define CFG_TUH_DEVICE_MAX          (3*CFG_TUH_HUB + 1)

//------------- HID -------------//
#define CFG_TUH_HID_EPIN_BUFSIZE    64
#define CFG_TUH_HID_EPOUT_BUFSIZE   64

//------------- CDC -------------//

// Set Line Control state on enumeration/mounted:
// DTR ( bit 0), RTS (bit 1)
#define CFG_TUH_CDC_LINE_CONTROL_ON_ENUM    0x03

// Set Line Coding on enumeration/mounted, value for cdc_line_coding_t
// bit rate = 115200, 1 stop bit, no parity, 8 bit data width
#define CFG_TUH_CDC_LINE_CODING_ON_ENUM   { 115200, CDC_LINE_CODING_STOP_BITS_1, CDC_LINE_CODING_PARITY_NONE, 8 }



#ifdef __cplusplus
}
#endif
#endif /*__RTTHREAD__*/

#endif /* TUSB_CONFIG_H_ */