| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 3.3.20. [TC-DD-3.20] Commissioning Flow - Commission, Unpair and |
| Re-commission Device [DUT - Commissioner] |
| |
| PICS: |
| - MCORE.ROLE.COMMISSIONER |
| - MCORE.DD.QR_COMMISSIONING |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| Chip-tool command used below are an example to verify the DUT as commissioner test cases. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| disabled: true |
| |
| - label: "Preconditions" |
| verification: | |
| 1 - DUT is on an operational network and has accurate date, time, timezone, regulatory, and fabric information available. |
| 2 - 5.1.3 - QR code is printed on the Commissionee device or in additional provided materials (ex: manual). |
| disabled: true |
| |
| - label: |
| "Step 1: Place TH into commissioning mode using the TH manufacturers |
| means to be discovered by the DUT Commissioner" |
| verification: | |
| ./chip-all-clusters-app --discriminator 3840 |
| Verify on TH (All-cluster-app): |
| |
| [1651109580.413197][31207:31207] CHIP:DL: Device Configuration: |
| [1651109580.413259][31207:31207] CHIP:DL: Serial Number: TEST_SN |
| [1651109580.413294][31207:31207] CHIP:DL: Vendor Id: 65521 (0xFFF1) |
| [1651109580.413327][31207:31207] CHIP:DL: Product Id: 32769 (0x8001) |
| [1651109580.413358][31207:31207] CHIP:DL: Hardware Version: 0 |
| [1651109580.413380][31207:31207] CHIP:DL: Setup Pin Code (0 for UNKNOWN/ERROR): 20202021 |
| [1651109580.413401][31207:31207] CHIP:DL: Setup Discriminator (0xFFFF for UNKNOWN/ERROR): 3840 (0xF00) |
| [1651109580.413428][31207:31207] CHIP:DL: Manufacturing Date: (not set) |
| [1651109580.413450][31207:31207] CHIP:DL: Device Type: 65535 (0xFFFF) |
| [1651109580.413470][31207:31207] CHIP:-: ==== Onboarding payload for Standard Commissioning Flow ==== |
| [1651109580.413525][31207:31207] CHIP:SVR: SetupQRCode: [MT:-24J0AFN00KA0648G00] |
| disabled: true |
| |
| - label: "Step 2a: Scan THs QR code using the DUT Commissioner." |
| PICS: MCORE.DD.SCAN_QR_CODE |
| verification: | |
| 1. Verify the QR code is scanned by DUT |
| Note: chip-tool does not support physically scanning QR codes |
| disabled: true |
| |
| - label: |
| "Step 2b: DUT parses THs QR code. Follow any steps needed for the |
| Commissioner/Commissionee to complete the commissioning process over |
| the TH Commissionees method of device discovery" |
| verification: | |
| Verify on TH (All-cluster-app): |
| [1651109784.452770][31207:31207] CHIP:SVR: Commissioning completed successfully |
| [1651109784.452813][31207:31207] CHIP:DIS: Updating services using commissioning mode 0 |
| |
| Verify on DUT (Chip-tool): |
| ./chip-tool pairing code 1 MT:-24J0AFN00KA0648G00 |
| |
| [1651109784376] [95553:65657838] CHIP: [CTL] Received CommissioningComplete response |
| [1651109784376] [95553:65657838] CHIP: [CTL] Successfully finished commissioning step 'SendComplete' |
| [1651109784376] [95553:65657838] CHIP: [CTL] Commissioning stage next step: 'SendComplete' -> 'Cleanup' |
| [1651109784376] [95553:65657838] CHIP: [CTL] Performing next commissioning step 'Cleanup' |
| [1651109784376] [95553:65657838] CHIP: [CTL] Successfully finished commissioning step 'Cleanup' |
| [1651109784376] [95553:65657838] CHIP: [TOO] Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "Step 3: Using DUT Commissioner, unpair the TH Commissionee from the |
| Matter network." |
| verification: | |
| ./chip-tool operationalcredentials remove-fabric 1 1 0 |
| Verify on DUT (Chip-tool): |
| |
| CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_003E Command=0x0000_0008 |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003E Command 0x0000_0008 |
| CHIP:TOO: NOCResponse: { |
| CHIP:TOO: statusCode: 0 |
| CHIP:TOO: fabricIndex: 2 |
| CHIP:TOO: } |
| CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "Step 4: Place TH Commissionee back into commissioning mode using the |
| TH manufacturers means to be discovered by the DUT Commissioner" |
| verification: | |
| 1. Place the TH into commissioning mode by launching the app again |
| |
| ./chip-all-clusters-app --discriminator 3840 |
| Verify on TH (All-cluster-app): |
| |
| [1651110721.112368][31791:31791] CHIP:DL: Device Configuration: |
| [1651110721.112448][31791:31791] CHIP:DL: Serial Number: TEST_SN |
| [1651110721.112501][31791:31791] CHIP:DL: Vendor Id: 65521 (0xFFF1) |
| [1651110721.112552][31791:31791] CHIP:DL: Product Id: 32769 (0x8001) |
| [1651110721.112597][31791:31791] CHIP:DL: Hardware Version: 0 |
| [1651110721.112630][31791:31791] CHIP:DL: Setup Pin Code (0 for UNKNOWN/ERROR): 20202021 |
| [1651110721.112662][31791:31791] CHIP:DL: Setup Discriminator (0xFFFF for UNKNOWN/ERROR): 3840 (0xF00) |
| [1651110721.112703][31791:31791] CHIP:DL: Manufacturing Date: (not set) |
| [1651110721.112737][31791:31791] CHIP:DL: Device Type: 65535 (0xFFFF) |
| [1651110721.112767][31791:31791] CHIP:-: ==== Onboarding payload for Standard Commissioning Flow ==== |
| [1651110721.112838][31791:31791] CHIP:SVR: SetupQRCode: [MT:-24J0AFN00KA0648G00] |
| disabled: true |
| |
| - label: "Step 5a: Scan THs QR code using the DUT Commissioner." |
| PICS: MCORE.DD.SCAN_QR_CODE |
| verification: | |
| 1. Verify the QR code is scanned by DUT |
| Note: chip-tool does not support physically scanning QR codes |
| disabled: true |
| |
| - label: |
| "Step 5b: DUT parses THs QR code. Follow any steps needed for the |
| Commissioner/Commissionee to complete the commissioning process over |
| the TH Commissionees method of device discovery" |
| verification: | |
| Verify on TH (All-cluster-app): |
| [1651110724.759825][31791:31791] CHIP:SVR: Commissioning completed successfully |
| [1651110724.759869][31791:31791] CHIP:DIS: Updating services using commissioning mode 0 |
| |
| Verify on DUT (Chip-tool): |
| ./chip-tool pairing code 1 MT:-24J0AFN00KA0648G00 |
| |
| [1651110724689] [95810:65669790] CHIP: [CTL] Received CommissioningComplete response |
| [1651110724689] [95810:65669790] CHIP: [CTL] Successfully finished commissioning step 'SendComplete' |
| [1651110724689] [95810:65669790] CHIP: [CTL] Commissioning stage next step: 'SendComplete' -> 'Cleanup' |
| [1651110724689] [95810:65669790] CHIP: [CTL] Performing next commissioning step 'Cleanup' |
| [1651110724689] [95810:65669790] CHIP: [CTL] Successfully finished commissioning step 'Cleanup' |
| [1651110724689] [95810:65669790] CHIP: [TOO] Device commissioning completed with success |
| disabled: true |
