| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: |
| Window Covering [TC-WNCV-3.2] DownOrClose command & OperationalStatus |
| attribute Verification [DUT as Server] |
| |
| PICS: |
| - WNCV.S |
| |
| # TC-WNCV tests featuremap conditional dependencies -> use PICS |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Window Covering" |
| endpoint: 1 |
| |
| Step1bWaitTime: |
| type: int16u |
| defaultValue: 5000 |
| Step2bWaitTime: |
| type: int16u |
| defaultValue: 200 |
| Step2eWaitTime: |
| type: int16u |
| defaultValue: 1000 |
| Step4bWaitTime: |
| type: int16u |
| defaultValue: 1000 |
| Step5aWaitTime: |
| type: int16u |
| defaultValue: 200 |
| |
| tests: |
| - label: "Step 0: Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| ################ Position Init Phase ############# |
| ### Step 1x -> Initialize the Covering position before any testing |
| ### MANDATORY Init Commands |
| - label: |
| "Step 1a: TH sends UpOrOpen command to preposition the DUT in the |
| opposite direction" |
| command: "UpOrOpen" |
| PICS: WNCV.S.C00.Rsp |
| |
| - label: "Step 1b: TH Waits for 10 seconds movement(s) on the device" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: Step1bWaitTime |
| |
| ### |
| ### Mandatory Depends on the FeatureMap |
| - label: |
| "Step 1c: If (PA & LF) TH reads CurrentPositionLiftPercent100ths |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "CurrentPositionLiftPercent100ths" |
| PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A000e |
| response: |
| constraints: |
| type: percent100ths |
| minValue: 0 |
| maxValue: 9999 |
| |
| ### Optional Depends on the FeatureMap |
| - label: |
| "Step 1d: If (PA & LF) TH reads CurrentPositionLiftPercentage optional |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "CurrentPositionLiftPercentage" |
| PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A0008 |
| response: |
| constraints: |
| type: percent |
| minValue: 0 |
| maxValue: 99 |
| |
| ### Mandatory Depends on the FeatureMap |
| - label: |
| "Step 1e: If (PA & TL) TH reads CurrentPositionTiltPercent100ths |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "CurrentPositionTiltPercent100ths" |
| PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A000f |
| response: |
| constraints: |
| type: percent100ths |
| minValue: 0 |
| maxValue: 9999 |
| |
| ### Optional Depends on the FeatureMap |
| - label: |
| "Step 1f: If (PA & TL) TH reads CurrentPositionTiltPercentage optional |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "CurrentPositionTiltPercentage" |
| PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A0009 |
| response: |
| constraints: |
| type: percent |
| minValue: 0 |
| maxValue: 99 |
| |
| ######## DownOrClose Command ####### |
| ### Step 2x -> Check DownOrClose Fast effects |
| |
| ### MANDATORY Command |
| - label: "Step 2a: TH sends DownOrClose command to DUT" |
| command: "DownOrClose" |
| PICS: WNCV.S.C01.Rsp |
| |
| ### Depending on the DUT specs we might prefer a arguments here |
| - label: "Step 2b: TH waits for 100-1000 ms" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: Step2bWaitTime |
| |
| ### Mandatory Depends on the FeatureMap |
| - label: |
| "Step 2c: If (PA & LF) TH reads TargetPositionLiftPercent100ths |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "TargetPositionLiftPercent100ths" |
| PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A000b |
| response: |
| value: 10000 |
| |
| ### Mandatory Depends on the FeatureMap |
| - label: |
| "Step 2d: If (PA & TL) TH reads TargetPositionTiltPercent100ths |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "TargetPositionTiltPercent100ths" |
| PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A000c |
| response: |
| value: 10000 |
| |
| - label: "Step 2e: TH leave the device moving for 2 seconds" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: Step2eWaitTime |
| |
| ######## DownOrClose Reports ####### |
| ### Step 3x -> Check DownOrClose Mid term effects |
| ### Depends on the FeatureMap |
| # The value of bit 0..1 must be 10b & if (LF) value of bit 2..3 must be 10b else 00b & if (TL) value of bit 4..5 must be 10b else 00b |
| # Only 3 possibilities are possible here : 0Ah = 10, 22h = 34 or 2Ah = 42 then check a range for simplicity [10 - 42] |
| - label: "Step 3a: TH reads OperationalStatus attribute from DUT" |
| PICS: WNCV.S.A000a |
| command: "readAttribute" |
| attribute: "OperationalStatus" |
| response: |
| constraints: |
| type: bitmap8 |
| anyOf: [10, 34, 42] |
| |
| ### Depending on the DUT specs we might prefer a arguments here |
| - label: "Step 3a: DUT updates its attributes" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: 3000 |
| |
| ### Mandatory Depends on the FeatureMap |
| - label: |
| "Step 3b: If (PA & LF) TH reads CurrentPositionLiftPercent100ths |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "CurrentPositionLiftPercent100ths" |
| PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A000e |
| response: |
| constraints: |
| type: percent100ths |
| minValue: 1 |
| maxValue: 10000 |
| |
| ### Optional Depends on the FeatureMap |
| - label: |
| "Step 3c: If (PA & LF) TH reads CurrentPositionLiftPercentage optional |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "CurrentPositionLiftPercentage" |
| PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A0008 |
| response: |
| constraints: |
| type: percent |
| minValue: 1 |
| maxValue: 100 |
| |
| ### Mandatory Depends on the FeatureMap |
| - label: |
| "Step 3d: If (PA & TL) TH reads CurrentPositionTiltPercent100ths |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "CurrentPositionTiltPercent100ths" |
| PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A000f |
| response: |
| constraints: |
| type: percent100ths |
| minValue: 1 |
| maxValue: 10000 |
| |
| ### Optional Depends on the FeatureMap |
| - label: |
| "Step 3e: If (PA & LF) TH reads CurrentPositionTiltPercentage optional |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "CurrentPositionTiltPercentage" |
| PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A0009 |
| response: |
| constraints: |
| type: percent |
| minValue: 1 |
| maxValue: 100 |
| |
| ######## STOP ####### |
| ### Step 4x -> Check StopMotion fast effects |
| ### MANDATORY Command |
| - label: "Step 4a: TH sends a StopMotion command to DUT" |
| command: "StopMotion" |
| PICS: WNCV.S.C02.Rsp |
| |
| - label: "Step 4b: TH waits for 1-5 seconds end of motion(s) on the DUT" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: Step4bWaitTime |
| |
| ### Must Be ZERO |
| # The value of bit 0..1 must be 00b & if (LF) value of bit 2..3 must be 00b & if (TL) value of bit 4..5 must be 00b |
| - label: "Step 4c: TH reads OperationalStatus attribute from DUT" |
| command: "readAttribute" |
| attribute: "OperationalStatus" |
| PICS: WNCV.S.A000a |
| response: |
| value: 0 |
| |
| ### Step 5x -> Check Stop Motion longer period effect |
| - label: "Step 5a: TH waits for 100-1000 ms" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: Step5aWaitTime |
| |
| ### Mandatory Depends on the FeatureMap shall be tested as equals CurrentPositionLiftPercent100ths |
| - label: |
| "Step 5b: If (PA & LF) TH reads TargetPositionLiftPercent100ths |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "TargetPositionLiftPercent100ths" |
| PICS: WNCV.S.F00 && WNCV.S.F02 && WNCV.S.A000b |
| response: |
| constraints: |
| type: percent100ths |
| minValue: 1 |
| maxValue: 10000 |
| |
| ### Mandatory Depends on the FeatureMap shall be tested as equals CurrentPositionTiltPercent100ths |
| - label: |
| "Step 5c: If (PA & TL) TH reads TargetPositionTiltPercent100ths |
| attribute from DUT" |
| command: "readAttribute" |
| attribute: "TargetPositionTiltPercent100ths" |
| PICS: WNCV.S.F01 && WNCV.S.F04 && WNCV.S.A000c |
| response: |
| constraints: |
| type: percent100ths |
| minValue: 1 |
| maxValue: 10000 |
