| /** |
| ****************************************************************************** |
| * @file stm32wb5mm_dk_conf_template.h |
| * @author MCD Application Team |
| * @brief configuration file. |
| * This file should be copied to the application folder and renamed |
| * to stm32wb5mm_dk_conf.h |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2019-2021 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32WB5MM_DK_CONF_H |
| #define STM32WB5MM_DK_CONF_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32wbxx_hal.h" |
| |
| /* Environmental Sensors usage */ |
| #define USE_ENV_SENSOR_HTS221_0 0U |
| #define USE_ENV_SENSOR_LPS22HH_0 0U |
| |
| /* Motion Sensors usage */ |
| #define USE_MOTION_SENSOR_ISM330DLC_0 0U |
| #define USE_MOTION_SENSOR_IIS2MDC_0 0U |
| |
| /* COM port usage */ |
| #define USE_BSP_COM_FEATURE 0U |
| #define USE_COM_LOG 0U |
| |
| #define USE_LCD_CTRL_SSD1315 1U |
| #define ENV_TEMPERATURE 0U |
| #define USE_MOTION_SENSOR_ISM330DHCX_0 0U |
| #define ENV_PRESSURE 0U |
| #define ENV_HUMIDITY 0U |
| |
| /* IRQ priorities */ |
| #define BSP_BUTTON_USERx_IT_PRIORITY 0x05UL |
| #define PWM_LED_CLOCK_IT_PRIORITY 0x03UL |
| |
| /* I2C3 Frequency in Hz */ |
| #define BUS_I2C3_FREQUENCY 100000UL /* Frequency of I2C3 = 100 KHz*/ |
| |
| /* Indicates whether or not TCXO is supported by the board |
| * 0: TCXO not supported |
| * 1: TCXO supported |
| */ |
| #define IS_TCXO_SUPPORTED 0U |
| |
| /* Indicates whether or not DCDC is supported by the board |
| * 0: DCDC not supported |
| * 1: DCDC supported |
| */ |
| #define IS_DCDC_SUPPORTED 1U |
| |
| #define STM32WB5MM_DK_I2C_Init BSP_I2C3_Init |
| #define STM32WB5MM_DK_I2C_DeInit BSP_I2C3_DeInit |
| #define STM32WB5MM_DK_I2C_ReadReg BSP_I2C3_ReadReg |
| #define STM32WB5MM_DK_I2C_WriteReg BSP_I2C3_WriteReg |
| |
| #define STM32WB5MM_DK_GetTick BSP_GetTick |
| |
| /*Number of millisecond of audio at each DMA interrupt*/ |
| #define N_MS_PER_INTERRUPT (20U) |
| |
| #define AUDIO_IN_CHANNELS 1 |
| #define AUDIO_IN_SAMPLING_FREQUENCY 16000 |
| |
| #define AUDIO_CHANNELS_OUT 1 |
| #define AUDIO_OUT_SAMPLING_FREQUENCY 16000 |
| |
| #define AUDIO_IN_BUFFER_SIZE DEFAULT_AUDIO_IN_BUFFER_SIZE |
| |
| #if (AUDIO_IN_SAMPLING_FREQUENCY == 8000) |
| #define MAX_DECIMATION_FACTOR 160 |
| #else |
| #define MAX_DECIMATION_FACTOR 128 |
| #endif |
| |
| #define MAX_MIC_FREQ 1280 /*kHz - Maximum PDM clock */ |
| #define MAX_AUDIO_IN_CHANNEL_NBR_PER_IF 1 /* Maximum number of microphones channels for peripheral interface */ |
| #define MAX_AUDIO_IN_CHANNEL_NBR_TOTAL 1 |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32WB5MM_DK_CONF_H */ |
