third_party/infineon/psoc6/psoc6_sdk/configs/iot_config.h - third_party/github/project-chip/connectedhomeip - Git at Google

 /*
  * Copyright 2020-2021, Cypress Semiconductor Corporation or a subsidiary of
  * Cypress Semiconductor Corporation. All Rights Reserved.
  *
  * This software, including source code, documentation and related
  * materials ("Software"), is owned by Cypress Semiconductor Corporation
  * or one of its subsidiaries ("Cypress") and is protected by and subject to
  * worldwide patent protection (United States and foreign),
  * United States copyright laws and international treaty provisions.
  * Therefore, you may use this Software only as provided in the license
  * agreement accompanying the software package from which you
  * obtained this Software ("EULA").
  * If no EULA applies, Cypress hereby grants you a personal, non-exclusive,
  * non-transferable license to copy, modify, and compile the Software
  * source code solely for use in connection with Cypress's
  * integrated circuit products. Any reproduction, modification, translation,
  * compilation, or representation of this Software except as specified
  * above is prohibited without the express written permission of Cypress.
  *
  * Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND,
  * EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT, IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress
  * reserves the right to make changes to the Software without notice. Cypress
  * does not assume any liability arising out of the application or use of the
  * Software or any product or circuit described in the Software. Cypress does
  * not authorize its products for use in any products where a malfunction or
  * failure of the Cypress product may reasonably be expected to result in
  * significant property damage, injury or death ("High Risk Product"). By
  * including Cypress's product in a High Risk Product, the manufacturer
  * of such system or application assumes all risk of such use and in doing
  * so agrees to indemnify Cypress against all liability.
  */
 /*
  * Copyright (C) 2019 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
  *
  * Permission is hereby granted, free of charge, to any person obtaining a copy of
  * this software and associated documentation files (the "Software"), to deal in
  * the Software without restriction, including without limitation the rights to
  * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
  * the Software, and to permit persons to whom the Software is furnished to do so,
  * subject to the following conditions:
  *
  * The above copyright notice and this permission notice shall be included in all
  * copies or substantial portions of the Software.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
  * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
  * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
  * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  */

 /**
  * @file iot_config.h
  * @brief This file contains configuration settings for the MQTT Library.
  */

 #ifndef IOT_CONFIG_H_
 #define IOT_CONFIG_H_

 #include "cy_iot_platform_types.h"

 #include <assert.h>
 #include <stdlib.h>

 /**
  * @addtogroup mqtt_cyport_config
  * @{
  */
 /**
  * @brief Default thread priority for the threads created by AWS IoT Device SDK.
  */
 #define IOT_THREAD_DEFAULT_PRIORITY (CY_RTOS_PRIORITY_NORMAL)
 /**
  * @brief Default thread stack size for the threads created by AWS IoT Device SDK.
  * The stack size may be tuned to suit the desired use case.
  */
 #define IOT_THREAD_DEFAULT_STACK_SIZE (2048)

 /**
  * @brief Default wait time (in milliseconds) to receive keep-alive responses from the MQTT broker. This value may be adjusted to
  * suit the use case and network environment. Refer aws-iot-device-sdk-embedded-C/doc/lib/mqtt.txt for additional info.
  */
 #define IOT_MQTT_RESPONSE_WAIT_MS (5000U)

 /**
  * \cond
  * @brief Macros to enable/disable asserts in the IoT Device SDK library.
  * Asserts are disabled by default; to enable asserts, modify these macros to 1.
  */
 #define IOT_CONTAINERS_ENABLE_ASSERTS (0)
 #define IOT_MQTT_ENABLE_ASSERTS (0)
 #define IOT_TASKPOOL_ENABLE_ASSERTS (0)
 #define AWS_IOT_SHADOW_ENABLE_ASSERTS (0)
 #define AWS_IOT_DEFENDER_ENABLE_ASSERTS (0)
 #define AWS_IOT_JOBS_ENABLE_ASSERTS (0)
 /**
  * \endcond
  */

 /**
  * @brief Insert program diagnostics. This function should have the same signature as
  * [assert](https://pubs.opengroup.org/onlinepubs/9699919799/functions/assert.html)
  */
 #if (IOT_CONTAINERS_ENABLE_ASSERTS == 1) || (IOT_MQTT_ENABLE_ASSERTS == 1) || (IOT_TASKPOOL_ENABLE_ASSERTS == 1) ||                \
     (AWS_IOT_SHADOW_ENABLE_ASSERTS == 1) || (AWS_IOT_DEFENDER_ENABLE_ASSERTS == 1) || (AWS_IOT_JOBS_ENABLE_ASSERTS == 1)
 #define Iot_DefaultAssert assert
 #else
 #define Iot_DefaultAssert
 #endif

 /**
  * @brief Memory allocation. This function should have the same signature as
  * [malloc](http://pubs.opengroup.org/onlinepubs/9699919799/functions/malloc.html)
  */
 #define Iot_DefaultMalloc malloc

 /**
  * @brief Free memory. This function should have the same signature as
  * [free](http://pubs.opengroup.org/onlinepubs/9699919799/functions/free.html)
  */
 #define Iot_DefaultFree free

 /**
  * \cond
  * @brief Library logging configuration. Configure the below macros to enable/disable debug logs in the library
  * Refer aws-iot-device-sdk-embedded-C/libraries/standard/common/include/iot_logging.h
  * for supported log levels.
  */
 #define IOT_LOG_LEVEL_GLOBAL IOT_LOG_ERROR
 #define IOT_LOG_LEVEL_DEMO IOT_LOG_ERROR
 #define IOT_LOG_LEVEL_PLATFORM IOT_LOG_ERROR
 #define IOT_LOG_LEVEL_NETWORK IOT_LOG_ERROR
 #define IOT_LOG_LEVEL_TASKPOOL IOT_LOG_ERROR
 #define IOT_LOG_LEVEL_MQTT IOT_LOG_ERROR
 #define AWS_IOT_LOG_LEVEL_SHADOW IOT_LOG_ERROR
 #define AWS_IOT_LOG_LEVEL_DEFENDER IOT_LOG_ERROR
 #define AWS_IOT_LOG_LEVEL_JOBS IOT_LOG_ERROR
 /**
  * \endcond
  */

 /**
  * @}
  */

 #endif /* ifndef IOT_CONFIG_H_ */
	/*
	* Copyright 2020-2021, Cypress Semiconductor Corporation or a subsidiary of
	* Cypress Semiconductor Corporation. All Rights Reserved.
	*
	* This software, including source code, documentation and related
	* materials ("Software"), is owned by Cypress Semiconductor Corporation
	* or one of its subsidiaries ("Cypress") and is protected by and subject to
	* worldwide patent protection (United States and foreign),
	* United States copyright laws and international treaty provisions.
	* Therefore, you may use this Software only as provided in the license
	* agreement accompanying the software package from which you
	* obtained this Software ("EULA").
	* If no EULA applies, Cypress hereby grants you a personal, non-exclusive,
	* non-transferable license to copy, modify, and compile the Software
	* source code solely for use in connection with Cypress's
	* integrated circuit products. Any reproduction, modification, translation,
	* compilation, or representation of this Software except as specified
	* above is prohibited without the express written permission of Cypress.
	*
	* Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT, IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress
	* reserves the right to make changes to the Software without notice. Cypress
	* does not assume any liability arising out of the application or use of the
	* Software or any product or circuit described in the Software. Cypress does
	* not authorize its products for use in any products where a malfunction or
	* failure of the Cypress product may reasonably be expected to result in
	* significant property damage, injury or death ("High Risk Product"). By
	* including Cypress's product in a High Risk Product, the manufacturer
	* of such system or application assumes all risk of such use and in doing
	* so agrees to indemnify Cypress against all liability.
	*/
	/*
	* Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
	*
	* Permission is hereby granted, free of charge, to any person obtaining a copy of
	* this software and associated documentation files (the "Software"), to deal in
	* the Software without restriction, including without limitation the rights to
	* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
	* the Software, and to permit persons to whom the Software is furnished to do so,
	* subject to the following conditions:
	*
	* The above copyright notice and this permission notice shall be included in all
	* copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
	* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
	* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
	* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
	* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
	*/

	/**
	* @file iot_config.h
	* @brief This file contains configuration settings for the MQTT Library.
	*/

	#ifndef IOT_CONFIG_H_
	#define IOT_CONFIG_H_

	#include "cy_iot_platform_types.h"

	#include <assert.h>
	#include <stdlib.h>

	/**
	* @addtogroup mqtt_cyport_config
	* @{
	*/
	/**
	* @brief Default thread priority for the threads created by AWS IoT Device SDK.
	*/
	#define IOT_THREAD_DEFAULT_PRIORITY (CY_RTOS_PRIORITY_NORMAL)
	/**
	* @brief Default thread stack size for the threads created by AWS IoT Device SDK.
	* The stack size may be tuned to suit the desired use case.
	*/
	#define IOT_THREAD_DEFAULT_STACK_SIZE (2048)

	/**
	* @brief Default wait time (in milliseconds) to receive keep-alive responses from the MQTT broker. This value may be adjusted to
	* suit the use case and network environment. Refer aws-iot-device-sdk-embedded-C/doc/lib/mqtt.txt for additional info.
	*/
	#define IOT_MQTT_RESPONSE_WAIT_MS (5000U)

	/**
	* \cond
	* @brief Macros to enable/disable asserts in the IoT Device SDK library.
	* Asserts are disabled by default; to enable asserts, modify these macros to 1.
	*/
	#define IOT_CONTAINERS_ENABLE_ASSERTS (0)
	#define IOT_MQTT_ENABLE_ASSERTS (0)
	#define IOT_TASKPOOL_ENABLE_ASSERTS (0)
	#define AWS_IOT_SHADOW_ENABLE_ASSERTS (0)
	#define AWS_IOT_DEFENDER_ENABLE_ASSERTS (0)
	#define AWS_IOT_JOBS_ENABLE_ASSERTS (0)
	/**
	* \endcond
	*/

	/**
	* @brief Insert program diagnostics. This function should have the same signature as
	* [assert](https://pubs.opengroup.org/onlinepubs/9699919799/functions/assert.html)
	*/
	#if (IOT_CONTAINERS_ENABLE_ASSERTS == 1) \|\| (IOT_MQTT_ENABLE_ASSERTS == 1) \|\| (IOT_TASKPOOL_ENABLE_ASSERTS == 1) \|\| \
	(AWS_IOT_SHADOW_ENABLE_ASSERTS == 1) \|\| (AWS_IOT_DEFENDER_ENABLE_ASSERTS == 1) \|\| (AWS_IOT_JOBS_ENABLE_ASSERTS == 1)
	#define Iot_DefaultAssert assert
	#else
	#define Iot_DefaultAssert
	#endif

	/**
	* @brief Memory allocation. This function should have the same signature as
	* [malloc](http://pubs.opengroup.org/onlinepubs/9699919799/functions/malloc.html)
	*/
	#define Iot_DefaultMalloc malloc

	/**
	* @brief Free memory. This function should have the same signature as
	* [free](http://pubs.opengroup.org/onlinepubs/9699919799/functions/free.html)
	*/
	#define Iot_DefaultFree free

	/**
	* \cond
	* @brief Library logging configuration. Configure the below macros to enable/disable debug logs in the library
	* Refer aws-iot-device-sdk-embedded-C/libraries/standard/common/include/iot_logging.h
	* for supported log levels.
	*/
	#define IOT_LOG_LEVEL_GLOBAL IOT_LOG_ERROR
	#define IOT_LOG_LEVEL_DEMO IOT_LOG_ERROR
	#define IOT_LOG_LEVEL_PLATFORM IOT_LOG_ERROR
	#define IOT_LOG_LEVEL_NETWORK IOT_LOG_ERROR
	#define IOT_LOG_LEVEL_TASKPOOL IOT_LOG_ERROR
	#define IOT_LOG_LEVEL_MQTT IOT_LOG_ERROR
	#define AWS_IOT_LOG_LEVEL_SHADOW IOT_LOG_ERROR
	#define AWS_IOT_LOG_LEVEL_DEFENDER IOT_LOG_ERROR
	#define AWS_IOT_LOG_LEVEL_JOBS IOT_LOG_ERROR
	/**
	* \endcond
	*/

	/**
	* @}
	*/

	#endif /* ifndef IOT_CONFIG_H_ */