blob: ace9dde8bc858c15a26ac4fc1735b3ab69c25a9e [file] [log] [blame]
# I2C configuration options
# Copyright (c) 2015 Intel Corporation
# SPDX-License-Identifier: Apache-2.0
#
# I2C options
#
menuconfig I2C
bool "I2C Drivers"
help
Enable I2C Driver Configuration
if I2C
config I2C_SHELL
bool "I2C Shell"
default y
depends on SHELL
help
Enable I2C Shell.
The I2C shell currently support scanning and bus recovery.
config I2C_STATS
bool "I2C device Stats"
depends on STATS
help
Enable I2C Stats.
# Include these first so that any properties (e.g. defaults) below can be
# overridden (by defining symbols in multiple locations)
source "drivers/i2c/Kconfig.b91"
source "drivers/i2c/Kconfig.cc13xx_cc26xx"
source "drivers/i2c/Kconfig.dw"
source "drivers/i2c/Kconfig.esp32"
source "drivers/i2c/target/Kconfig"
source "drivers/i2c/Kconfig.gpio"
source "drivers/i2c/Kconfig.xec"
source "drivers/i2c/Kconfig.nrfx"
source "drivers/i2c/Kconfig.i2c_emul"
source "drivers/i2c/Kconfig.it8xxx2"
source "drivers/i2c/Kconfig.sbcon"
source "drivers/i2c/Kconfig.sifive"
source "drivers/i2c/Kconfig.stm32"
source "drivers/i2c/Kconfig.sam0"
source "drivers/i2c/Kconfig.litex"
source "drivers/i2c/Kconfig.lpc11u6x"
source "drivers/i2c/Kconfig.npcx"
source "drivers/i2c/Kconfig.test"
source "drivers/i2c/Kconfig.rcar"
source "drivers/i2c/Kconfig.tca954x"
source "drivers/i2c/Kconfig.gd32"
config I2C_INIT_PRIORITY
int "Init priority"
default KERNEL_INIT_PRIORITY_DEVICE
help
I2C device driver initialization priority.
module = I2C
module-str = i2c
source "subsys/logging/Kconfig.template.log_config"
config I2C_GECKO
bool "Gecko I2C driver"
depends on HAS_SILABS_GECKO
select SOC_GECKO_I2C
help
Enable the SiLabs Gecko I2C bus driver.
config I2C_SAM_TWIHS
bool "Atmel SAM (TWIHS) I2C driver"
depends on SOC_FAMILY_SAM
help
Enable Atmel SAM MCU Family (TWIHS) I2C bus driver.
config I2C_SAM_TWIM
bool "Atmel SAM (TWIM) I2C driver"
depends on SOC_SERIES_SAM4L
help
Enable Atmel SAM MCU Family (TWIM) I2C bus driver.
config I2C_SAM_TWI
bool "Atmel SAM (TWI) I2C driver"
depends on SOC_FAMILY_SAM
help
Enable Atmel SAM MCU Family (TWI) I2C bus driver.
config I2C_MCUX
bool "MCUX I2C driver"
depends on HAS_MCUX
select PINCTRL
help
Enable the mcux I2C driver.
config I2C_MCUX_FLEXCOMM
bool "MCUX FLEXCOMM I2C driver"
depends on HAS_MCUX_FLEXCOMM
help
Enable the mcux flexcomm i2c driver.
config I2C_MCUX_LPI2C
bool "MCUX LPI2C driver"
depends on HAS_MCUX_LPI2C && CLOCK_CONTROL
help
Enable the mcux LPI2C driver.
config I2C_MCUX_LPI2C_BUS_RECOVERY
bool "Bus recovery support"
depends on I2C_MCUX_LPI2C && PINCTRL
select I2C_BITBANG
help
Enable LPI2C driver bus recovery support via GPIO bitbanging.
config I2C_IMX
bool "i.MX I2C driver"
depends on HAS_IMX_I2C
help
Enable the i.MX I2C driver.
config I2C_CC32XX
bool "CC32XX I2C driver"
depends on SOC_SERIES_CC32XX
help
Enable the CC32XX I2C driver.
config I2C_BITBANG
bool
help
Enable library used for software driven (bit banging) I2C support
config I2C_NIOS2
bool "Nios-II I2C driver"
depends on HAS_ALTERA_HAL
help
Enable the Nios-II I2C driver.
config I2C_RV32M1_LPI2C
bool "RV32M1 LPI2C driver"
depends on HAS_RV32M1_LPI2C && CLOCK_CONTROL
help
Enable the RV32M1 LPI2C driver.
endif # I2C