| # i.MX RT6XX Series |
| |
| # Copyright (c) 2020, NXP |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| choice |
| prompt "i.MX RT6XX Series MCU Selection" |
| depends on SOC_SERIES_IMX_RT6XX |
| |
| config SOC_MIMXRT685S_CM33 |
| bool "SOC_MIMXRT685S M33" |
| select CPU_HAS_ARM_SAU |
| select CPU_HAS_ARM_MPU |
| select CPU_HAS_FPU |
| select ARMV8_M_DSP |
| select ARM_TRUSTZONE_M |
| select CPU_CORTEX_M_HAS_SYSTICK |
| select HAS_MCUX |
| select HAS_MCUX_SYSCON |
| select HAS_MCUX_FLEXCOMM |
| select HAS_MCUX_FLEXSPI |
| select HAS_MCUX_CACHE |
| select HAS_MCUX_LPC_DMA |
| select HAS_MCUX_LPADC |
| select HAS_MCUX_OS_TIMER |
| select HAS_MCUX_LPC_RTC |
| select HAS_MCUX_TRNG |
| select HAS_MCUX_SCTIMER |
| select HAS_MCUX_USDHC1 |
| select HAS_MCUX_USDHC2 |
| select INIT_SYS_PLL |
| select HAS_MCUX_USB_LPCIP3511 |
| select USB_DEDICATED_MEMORY if USB_DEVICE_DRIVER |
| select HAS_MCUX_CTIMER |
| endchoice |
| |
| if SOC_SERIES_IMX_RT6XX |
| |
| config SOC_PART_NUMBER_MIMXRT685SFVKB |
| bool |
| |
| config SOC_PART_NUMBER_MIMXRT685SFFOB |
| bool |
| |
| config SOC_PART_NUMBER_MIMXRT685SFAWBR |
| bool |
| |
| config SOC_PART_NUMBER_IMX_RT6XX |
| string |
| default "MIMXRT685SFVKB" if SOC_PART_NUMBER_MIMXRT685SFVKB |
| default "MIMXRT685SFFOB" if SOC_PART_NUMBER_MIMXRT685SFFOB |
| default "MIMXRT685SFAWBR" if SOC_PART_NUMBER_MIMXRT685SFAWBR |
| |
| help |
| This string holds the full part number of the SoC. It is a hidden |
| option that you should not set directly. The part number selection |
| choice defines the default value for this string. |
| |
| config INIT_SYS_PLL |
| bool "Initialize SYS PLL" |
| |
| config INIT_AUDIO_PLL |
| bool "Initialize Audio PLL" |
| |
| config USB_DEDICATED_MEMORY |
| bool "Dedicated memory for USB transfer buffer and controller operation buffers" |
| |
| config XTAL_SYS_CLK_HZ |
| int "External oscillator frequency" |
| help |
| Set the external oscillator frequency in Hz. This should be set by the |
| board's defconfig. |
| |
| config SYSOSC_SETTLING_US |
| int "System oscillator settling time" |
| help |
| Set the board system oscillator settling time in us. This should be set by the |
| board's defconfig. |
| |
| menuconfig NXP_IMX_RT6XX_BOOT_HEADER |
| bool "Boot header" |
| depends on !BOOTLOADER_MCUBOOT |
| help |
| Enable data structures required by the boot ROM to boot the |
| application from an external flash device. |
| |
| if NXP_IMX_RT6XX_BOOT_HEADER |
| |
| choice BOOT_DEVICE |
| prompt "Boot device selection" |
| default BOOT_FLEXSPI_NOR |
| |
| config BOOT_FLEXSPI_NOR |
| bool "FlexSPI serial NOR" |
| |
| endchoice |
| |
| config FLASH_CONFIG_OFFSET |
| hex "Flash config data offset" |
| default 0x400 |
| help |
| The flash config offset provides the boot ROM with the on-board |
| flash type and parameters. The boot ROM requires a fixed flash config |
| offset for FlexSPI device. |
| |
| config IMAGE_VECTOR_TABLE_OFFSET |
| hex "Image vector table offset" |
| default 0x1000 |
| help |
| The Image Vector Table (IVT) provides the boot ROM with pointers to |
| the application entry point and device configuration data. The boot |
| ROM requires a fixed IVT offset for each type of boot device. |
| |
| endif # NXP_IMX_RT6XX_BOOT_HEADER |
| |
| |
| endif # SOC_SERIES_IMX_RT6XX |
