| :orphan: |
| |
| .. _zephyr_3.5: |
| |
| Zephyr 3.5.0 (Working Draft) |
| ############################ |
| |
| We are pleased to announce the release of Zephyr version 3.5.0. |
| |
| Major enhancements with this release include: |
| |
| The following sections provide detailed lists of changes by component. |
| |
| Security Vulnerability Related |
| ****************************** |
| |
| API Changes |
| *********** |
| |
| Changes in this release |
| ======================= |
| |
| * Set :kconfig:option:`CONFIG_BOOTLOADER_SRAM_SIZE` default value to ``0`` (was |
| ``16``). Bootloaders that use a part of the SRAM should set this value to an |
| appropriate size. :github:`60371` |
| |
| * Time and timestamps in the network subsystem, PTP and IEEE 802.15.4 |
| were more precisely specified and all in-tree call sites updated accordingly. |
| Fields for timed TX and TX/RX timestamps have been consolidated. See |
| :c:type:`net_time_t`, :c:struct:`net_ptp_time`, :c:struct:`ieee802154_config`, |
| :c:struct:`ieee802154_radio_api` and :c:struct:`net_pkt` for extensive |
| documentation. As this is largely an internal API, existing applications will |
| most probably continue to work unchanged. |
| |
| Removed APIs in this release |
| ============================ |
| |
| Deprecated in this release |
| ========================== |
| |
| * Setting the GIC architecture version by selecting |
| :kconfig:option:`CONFIG_GIC_V1`, :kconfig:option:`CONFIG_GIC_V2` and |
| :kconfig:option:`CONFIG_GIC_V3` directly in Kconfig has been deprecated. |
| The GIC version should now be specified by adding the appropriate compatible, for |
| example :dtcompatible:`arm,gic-v2`, to the GIC node in the device tree. |
| |
| Stable API changes in this release |
| ================================== |
| |
| New APIs in this release |
| ======================== |
| |
| Kernel |
| ****** |
| |
| Architectures |
| ************* |
| |
| * ARM |
| |
| * ARM |
| |
| * ARM64 |
| |
| * RISC-V |
| |
| * Xtensa |
| |
| Bluetooth |
| ********* |
| |
| * Audio |
| |
| * Direction Finding |
| |
| * Host |
| |
| * Mesh |
| |
| * Controller |
| |
| * HCI Driver |
| |
| Boards & SoC Support |
| ******************** |
| |
| * Added support for these SoC series: |
| |
| * Nuvoton NuMaker M46x series |
| |
| * Removed support for these SoC series: |
| |
| * Made these changes in other SoC series: |
| |
| * Added support for these ARC boards: |
| |
| * Added support for these ARM boards: |
| |
| * Nuvoton NuMaker Platform M467 |
| |
| * Added support for these ARM64 boards: |
| |
| * Added support for these RISC-V boards: |
| |
| * Added support for these X86 boards: |
| |
| * Added support for these Xtensa boards: |
| |
| * Made these changes for ARC boards: |
| |
| * Made these changes for ARM boards: |
| |
| * Made these changes for ARM64 boards: |
| |
| * Made these changes for RISC-V boards: |
| |
| * Made these changes for X86 boards: |
| |
| * Made these changes for Xtensa boards: |
| |
| * Removed support for these ARC boards: |
| |
| * Removed support for these ARM boards: |
| |
| * Removed support for these ARM64 boards: |
| |
| * Removed support for these RISC-V boards: |
| |
| * Removed support for these X86 boards: |
| |
| * Removed support for these Xtensa boards: |
| |
| * Made these changes in other boards: |
| |
| * Added support for these following shields: |
| |
| Build system and infrastructure |
| ******************************* |
| |
| Drivers and Sensors |
| ******************* |
| |
| * ADC |
| |
| * Battery-backed RAM |
| |
| * CAN |
| |
| * Clock control |
| |
| * Added support for Nuvoton NuMaker M46x |
| |
| * Counter |
| |
| * Crypto |
| |
| * DAC |
| |
| * DFU |
| |
| * Disk |
| |
| * Display |
| |
| * DMA |
| |
| * EEPROM |
| |
| * Entropy |
| |
| * ESPI |
| |
| * Ethernet |
| |
| * Flash |
| |
| * Introduce npcx flash driver that supports two or more spi nor flashes via a |
| single Flash Interface Unit (FIU) module and Direct Read Access (DRA) mode |
| for better performance. |
| * Added support for Nuvoton NuMaker M46x embedded flash |
| |
| * FPGA |
| |
| * Fuel Gauge |
| |
| * GPIO |
| |
| * Added support for Nuvoton NuMaker M46x |
| |
| * hwinfo |
| |
| * I2C |
| |
| * I2S |
| |
| * I3C |
| |
| * IEEE 802.15.4 |
| |
| * Interrupt Controller |
| |
| * GIC: Architecture version selection is now based on the device tree |
| |
| * IPM |
| |
| * KSCAN |
| |
| * LED |
| |
| * MBOX |
| |
| * MEMC |
| |
| * PCIE |
| |
| * PECI |
| |
| * Pin control |
| |
| * Added support for Nuvoton NuMaker M46x |
| |
| * PWM |
| |
| * Power domain |
| |
| * Regulators |
| |
| * Reset |
| |
| * Added support for Nuvoton NuMaker M46x |
| |
| * SDHC |
| |
| * Sensor |
| |
| * Serial |
| |
| * Added support for Nuvoton NuMaker M46x |
| |
| * SPI |
| |
| * Remove npcx spi driver implemented by Flash Interface Unit (FIU) module. |
| |
| * Timer |
| |
| * The TI CC13xx/26xx system clock timer compatible was changed from |
| :dtcompatible:`ti,cc13xx-cc26xx-rtc` to :dtcompatible:`ti,cc13xx-cc26xx-rtc-timer` |
| and the corresponding Kconfig option from :kconfig:option:`CC13X2_CC26X2_RTC_TIMER` |
| to :kconfig:option:`CC13XX_CC26XX_RTC_TIMER` for improved consistency and |
| extensibility. No action is required unless the internal timer was modified. |
| |
| * USB |
| |
| * W1 |
| |
| * Watchdog |
| |
| * WiFi |
| |
| Networking |
| ********** |
| |
| * CoAP: |
| |
| * Use 64 bit timer values for calculating transmission timeouts. This fixes potential problems for |
| devices that stay on for more than 49 days when the 32 bit uptime counter might roll over and |
| cause CoAP packets to not timeout at all on this event. |
| |
| * LwM2M: |
| |
| * Added support for tickless mode. This removes the 500 ms timeout from the socket loop |
| so the engine does not constantly wake up the CPU. This can be enabled by |
| :kconfig:option:`CONFIG_LWM2M_TICKLESS`. |
| |
| * Wi-Fi |
| * Added Passive scan support. |
| * The Wi-Fi scan API updated with Wi-Fi scan parameter to allow scan mode selection. |
| |
| USB |
| *** |
| |
| Devicetree |
| ********** |
| |
| * ``zephyr,memory-region-mpu`` was renamed ``zephyr,memory-attr`` |
| |
| * The following macros were added: |
| :c:macro:`DT_FOREACH_NODE_VARGS`, |
| :c:macro:`DT_FOREACH_STATUS_OKAY_NODE_VARGS` |
| :c:macro:`DT_MEMORY_ATTR_FOREACH_NODE` |
| :c:macro:`DT_MEMORY_ATTR_APPLY` |
| |
| Libraries / Subsystems |
| ********************** |
| |
| * Management |
| |
| * Added response checking to MCUmgr's :c:enumerator:`MGMT_EVT_OP_CMD_RECV` |
| notification callback to allow applications to reject MCUmgr commands. |
| |
| * MCUmgr SMP version 2 error translation (to legacy MCUmgr error code) is now |
| supported in function handlers by setting ``mg_translate_error`` of |
| :c:struct:`mgmt_group` when registering a transport. See |
| :c:type:`smp_translate_error_fn` for function details. |
| |
| * File systems |
| |
| * Added support for ext2 file system. |
| |
| HALs |
| **** |
| |
| * Nuvoton |
| |
| * Added Nuvoton NuMaker M46x |
| |
| MCUboot |
| ******* |
| |
| Storage |
| ******* |
| |
| Trusted Firmware-M |
| ****************** |
| |
| Trusted Firmware-A |
| ****************** |
| |
| * Updated to TF-A 2.9.0. |
| |
| zcbor |
| ***** |
| |
| Documentation |
| ************* |
| |
| Tests and Samples |
| ***************** |
| |
| * Created common sample for file systems (`fs_sample`). It originates from sample for FAT |
| (`fat_fs`) and supports both FAT and ext2 file systems. |
| |
| Known Issues |
| ************ |
