| /* |
| * Copyright (c) 2018 Nordic Semiconductor ASA |
| * Copyright (c) 2017 Shawn Nock <shawn@monadnock.ca> |
| * Copyright (c) 2017 Linaro Limited |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include <nordic/nrf52810.dtsi> |
| |
| / { |
| model = "Nordic PCA10040 Dev Kit"; |
| compatible = "nordic,pca10040-dk", "nordic,nrf52810-qfaa", |
| "nordic,nrf52810"; |
| |
| chosen { |
| zephyr,console = &uart0; |
| #ifdef CONFIG_MCUMGR_SMP_UART |
| zephyr,uart-mcumgr = &uart0; |
| #endif |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led0: led@0 { |
| gpios = <&gpio0 17 GPIO_INT_ACTIVE_LOW>; |
| label = "Onboard GREEN LED 0"; |
| }; |
| led1: led@1 { |
| gpios = <&gpio0 18 GPIO_INT_ACTIVE_LOW>; |
| label = "Onboard GREEN LED 1"; |
| }; |
| led2: led@2 { |
| gpios = <&gpio0 19 GPIO_INT_ACTIVE_LOW>; |
| label = "Onboard GREEN LED 2"; |
| }; |
| led3: led@3 { |
| gpios = <&gpio0 20 GPIO_INT_ACTIVE_LOW>; |
| label = "Onboard GREEN LED 3"; |
| }; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| user_button_0: button@0 { |
| label = "Push button switch 0"; |
| gpios = <&gpio0 13 GPIO_PUD_PULL_UP>; |
| }; |
| user_button_1: button@1 { |
| label = "Push button switch 1"; |
| gpios = <&gpio0 14 GPIO_PUD_PULL_UP>; |
| }; |
| user_button_2: button@2 { |
| label = "Push button switch 2"; |
| gpios = <&gpio0 15 GPIO_PUD_PULL_UP>; |
| }; |
| user_button_3: button@3 { |
| label = "Push button switch 3"; |
| gpios = <&gpio0 16 GPIO_PUD_PULL_UP>; |
| }; |
| }; |
| }; |
| |
| &gpiote { |
| status ="ok"; |
| }; |
| |
| &gpio0 { |
| status ="ok"; |
| }; |
| |
| &uart0 { |
| status = "ok"; |
| current-speed = <115200>; |
| }; |
| |
| &i2c0 { |
| status = "ok"; |
| sda-pin = <26>; |
| scl-pin = <27>; |
| }; |
| |
| &flash0 { |
| /* |
| * For more information, see: |
| * http://docs.zephyrproject.org/devices/dts/flash_partitions.html |
| */ |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x00000000 0xc000>; |
| }; |
| slot0_partition: partition@c000 { |
| label = "image-0"; |
| reg = <0x0000C000 0xd000>; |
| }; |
| slot1_partition: partition@19000 { |
| label = "image-1"; |
| reg = <0x00019000 0xd000>; |
| }; |
| scratch_partition: partition@26000 { |
| label = "image-scratch"; |
| reg = <0x00026000 0x3000>; |
| }; |
| |
| #if defined(CONFIG_FS_FLASH_STORAGE_PARTITION) |
| storage_partition: partition@29000 { |
| label = "storage"; |
| reg = <0x00029000 0x00007000>; |
| }; |
| #endif |
| }; |
| }; |