# SECO JUNO SBC-D23 board with a single STM32F302VCT6 chip | |
# Flashing is possible by connecting the board to an ST-Link via SWD | |
# https://edge.seco.com/juno.html | |
source [find interface/stlink.cfg] | |
transport select hla_swd | |
source [find target/stm32f3x.cfg] | |
reset_config srst_only | |
$_TARGETNAME configure -event gdb-attach { | |
echo "Debugger attaching: halting execution" | |
reset halt | |
gdb_breakpoint_override hard | |
} | |
$_TARGETNAME configure -event gdb-detach { | |
echo "Debugger detaching: resuming execution" | |
resume | |
} |