blob: 89552e3b7461c45b1d0d26c1d2a1ae6fe6072311 [file] [log] [blame]
# Sensor configuration options
# Copyright (c) 2016 Intel Corporation
# SPDX-License-Identifier: Apache-2.0
menuconfig SENSOR
bool "Sensor drivers"
help
Include sensor drivers in system config
if SENSOR
module = SENSOR
module-str = sensor
source "subsys/logging/Kconfig.template.log_config"
config SENSOR_INIT_PRIORITY
int "Sensor init priority"
default 90
help
Sensor initialization priority.
config SENSOR_ASYNC_API
bool "Async Sensor API"
select RTIO
select RTIO_SYS_MEM_BLOCKS
help
Enables the asynchronous sensor API by leveraging the RTIO subsystem.
config SENSOR_SHELL
bool "Sensor shell"
depends on SHELL
select CBPRINTF_FP_SUPPORT
select SENSOR_ASYNC_API
help
This shell provides access to basic sensor data.
config SENSOR_SHELL_STREAM
bool "Sensor shell 'stream' command"
depends on SENSOR_SHELL
help
Add the 'stream' subcommand to the sensor shell. When run on drivers that
support streaming (usually hardware FIFO backed), the shell will continue
to print new values as they come until the stream is closed.
config SENSOR_SHELL_THREAD_STACK_SIZE
int "Stack size for the sensor shell data processing thread"
depends on SENSOR_SHELL_STREAM
default 1024
help
The sensor shell uses a dedicated thread to process data coming from the
sensors in either one-shot or streaming mode. Use this config to control
the size of that thread's stack.
config SENSOR_SHELL_BATTERY
bool "Sensor shell 'battery' command"
depends on SHELL
help
This enables the 'battery' command which reports charging information
in a convenient format. It makes use of a fuel gauge to read its
information.
config SENSOR_SHELL_TRIG_PRINT_TIMEOUT_MS
int "Timeout for printing the average sensor sample value"
default 5000
depends on SENSOR_SHELL
help
Control the frequency of the sampling window over which the sensor
interrupt handler will collect data.
config SENSOR_SHELL_MAX_TRIGGER_DEVICES
int "Maximum number of sensor devices that can have enabled triggers in shell"
default 1
depends on SENSOR_SHELL
help
Maximum number of sensor devices that the shell cmd can have
enabled triggers for.
config SENSOR_INFO
bool "Sensor Info iterable section"
comment "Device Drivers"
# zephyr-keep-sorted-start
source "drivers/sensor/adi/Kconfig"
source "drivers/sensor/ams/Kconfig"
source "drivers/sensor/aosong/Kconfig"
source "drivers/sensor/asahi_kasei/Kconfig"
source "drivers/sensor/bosch/Kconfig"
source "drivers/sensor/espressif/Kconfig"
source "drivers/sensor/honeywell/Kconfig"
source "drivers/sensor/infineon/Kconfig"
source "drivers/sensor/ite/Kconfig"
source "drivers/sensor/maxim/Kconfig"
source "drivers/sensor/meas/Kconfig"
source "drivers/sensor/microchip/Kconfig"
source "drivers/sensor/nordic/Kconfig"
source "drivers/sensor/nuvoton/Kconfig"
source "drivers/sensor/nxp/Kconfig"
source "drivers/sensor/rohm/Kconfig"
source "drivers/sensor/seeed/Kconfig"
source "drivers/sensor/sensirion/Kconfig"
source "drivers/sensor/silabs/Kconfig"
source "drivers/sensor/st/Kconfig"
source "drivers/sensor/ti/Kconfig"
source "drivers/sensor/vishay/Kconfig"
source "drivers/sensor/wsen/Kconfig"
# zephyr-keep-sorted-stop
source "drivers/sensor/a01nyub/Kconfig"
source "drivers/sensor/amd_sb_tsi/Kconfig"
source "drivers/sensor/amg88xx/Kconfig"
source "drivers/sensor/apds9960/Kconfig"
source "drivers/sensor/current_amp/Kconfig"
source "drivers/sensor/ens160/Kconfig"
source "drivers/sensor/explorir_m/Kconfig"
source "drivers/sensor/f75303/Kconfig"
source "drivers/sensor/fcx_mldx5/Kconfig"
source "drivers/sensor/grow_r502a/Kconfig"
source "drivers/sensor/hp206c/Kconfig"
source "drivers/sensor/hs300x/Kconfig"
source "drivers/sensor/tdk/icm42605/Kconfig"
source "drivers/sensor/tdk/icm42670/Kconfig"
source "drivers/sensor/tdk/icm42688/Kconfig"
source "drivers/sensor/tdk/icp10125/Kconfig"
source "drivers/sensor/isl29035/Kconfig"
source "drivers/sensor/ist8310/Kconfig"
source "drivers/sensor/lm35/Kconfig"
source "drivers/sensor/lm75/Kconfig"
source "drivers/sensor/lm77/Kconfig"
source "drivers/sensor/ltrf216a/Kconfig"
source "drivers/sensor/mc3419/Kconfig"
source "drivers/sensor/mhz19b/Kconfig"
source "drivers/sensor/tdk/mpu6050/Kconfig"
source "drivers/sensor/tdk/mpu9250/Kconfig"
source "drivers/sensor/ntc_thermistor/Kconfig"
source "drivers/sensor/pms7003/Kconfig"
source "drivers/sensor/qdec_sam/Kconfig"
source "drivers/sensor/rpi_pico_temp/Kconfig"
source "drivers/sensor/s11059/Kconfig"
source "drivers/sensor/sbs_gauge/Kconfig"
source "drivers/sensor/sx9500/Kconfig"
source "drivers/sensor/th02/Kconfig"
source "drivers/sensor/voltage_divider/Kconfig"
source "drivers/sensor/ene_tach_kb1200/Kconfig"
endif # SENSOR