| /* |
| * Copyright (c) 2020 Lemonbeat GmbH |
| * Copyright 2023 NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| |
| #include <nxp/nxp_lpc55S2x.dtsi> |
| #include "lpcxpresso55s28_common.dtsi" |
| #include <zephyr/dt-bindings/input/input-event-codes.h> |
| |
| / { |
| model = "NXP LPCXpresso55S28 board"; |
| compatible = "nxp,lpc55xxx", "nxp,lpc"; |
| |
| aliases{ |
| sw0 = &user_button_1; |
| sw1 = &user_button_2; |
| sw2 = &user_button_3; |
| watchdog0 = &wwdt0; |
| accel0 = &mma8652fc; |
| }; |
| |
| chosen { |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,code-partition = &slot0_partition; |
| zephyr,console = &flexcomm0; |
| zephyr,shell-uart = &flexcomm0; |
| zephyr,entropy = &rng; |
| zephyr,flash-controller = &iap; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| user_button_1: button_0 { |
| label = "User SW1"; |
| gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; |
| zephyr,code = <INPUT_KEY_0>; |
| }; |
| user_button_2: button_1 { |
| label = "User SW2"; |
| gpios = <&gpio1 18 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| zephyr,code = <INPUT_KEY_1>; |
| }; |
| user_button_3: button_2 { |
| label = "User SW3"; |
| gpios = <&gpio1 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| zephyr,code = <INPUT_KEY_2>; |
| }; |
| }; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &green_led { |
| status = "okay"; |
| }; |
| |
| &red_led { |
| status = "okay"; |
| }; |
| |
| &flexcomm0 { |
| status = "okay"; |
| }; |
| |
| &flexcomm4 { |
| status = "okay"; |
| }; |
| |
| &hs_lspi { |
| status = "okay"; |
| dmas = <&dma0 2>, <&dma0 3>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &wwdt0 { |
| status = "okay"; |
| }; |
| |
| &adc0 { |
| status = "okay"; |
| pinctrl-0 = <&pinmux_lpadc0>; |
| pinctrl-names = "default"; |
| }; |
| |
| &dma0 { |
| status = "okay"; |
| }; |
| |
| &flash0 { |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| boot_partition: partition@0 { |
| label = "mcuboot"; |
| reg = <0x0 DT_SIZE_K(32)>; |
| }; |
| slot0_partition: partition@8000 { |
| label = "image-0"; |
| reg = <0x00008000 DT_SIZE_K(208)>; |
| }; |
| slot1_partition: partition@3C000 { |
| label = "image-1"; |
| reg = <0x0003C000 DT_SIZE_K(208)>; |
| }; |
| storage_partition: partition@70000 { |
| label = "storage"; |
| reg = <0x00070000 DT_SIZE_K(52)>; |
| }; |
| /* The last 12KBs are reserved for PFR. */ |
| }; |
| }; |
| |
| zephyr_udc0: &usbhs { |
| status = "okay"; |
| }; |