| /* |
| * Copyright 2023, NXP |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /{ |
| chosen { |
| zephyr,display = &rm67162_g1120b0mipi; |
| }; |
| |
| en_mipi_display_g1120b0mipi: enable-mipi-display { |
| compatible = "regulator-fixed"; |
| regulator-name = "en_mipi_display"; |
| enable-gpios = <&nxp_mipi_connector 32 GPIO_ACTIVE_HIGH>; |
| regulator-boot-on; |
| }; |
| |
| lvgl_pointer { |
| compatible = "zephyr,lvgl-pointer-input"; |
| input = <&ft3267_g1120b0mipi>; |
| invert-y; |
| }; |
| }; |
| |
| &nxp_mipi_i2c { |
| status = "okay"; |
| ft3267_g1120b0mipi: ft3267@38 { |
| /* |
| * Note- the actual controller present on this IC is a FT3267, |
| * but the FT35336 driver in Zephyr supports this IC. |
| */ |
| compatible = "focaltech,ft5336"; |
| reg = <0x38>; |
| int-gpios = <&nxp_mipi_connector 29 GPIO_ACTIVE_LOW>; |
| reset-gpios = <&nxp_mipi_connector 28 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| &zephyr_mipi_dsi { |
| status = "okay"; |
| autoinsert-eotp; |
| phy-clock = <316800000>; |
| rm67162_g1120b0mipi: rm67162@0 { |
| status = "okay"; |
| compatible = "raydium,rm67162"; |
| reg = <0x0>; |
| reset-gpios = <&nxp_mipi_connector 21 GPIO_ACTIVE_HIGH>; |
| bl-gpios = <&nxp_mipi_connector 0 GPIO_ACTIVE_HIGH>; |
| te-gpios = <&nxp_mipi_connector 22 GPIO_ACTIVE_HIGH>; |
| data-lanes = <1>; |
| width = <400>; |
| height = <392>; |
| pixel-format = <MIPI_DSI_PIXFMT_RGB565>; |
| }; |
| }; |
