| # Copyright (C) 2020 Gerson Fernando Budke <nandojve@gmail.com> |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| description: | |
| GPIO pins exposed on Atmel Xplained Pro headers. |
| |
| The Xplained Pro layout provide a standard 20 pin header. A board can have |
| one or more headers and can share pins. The extension headers are given |
| names EXTn where n ϵ [1…7], n is determined by which ID pin is connected |
| to the embedded debugger. A header with ID7 signal from the embedded |
| debugger connected should be called EXT7. PWR, EXT1, EXT2 and EXT3 are |
| standard extension headers that have a predefined position according to the |
| list below: |
| * PWR is right angled at the top right hand side of the board. This |
| header must always be implemented. |
| * EXT1 is right angled at the top right hand side of the board, located |
| below the PWR header. This header must always be present. |
| * EXT2 is right angled and at the bottom right hand side of the board. |
| This header is mandatory for medium and large boards and should not be |
| implemented on small boards. |
| * EXT3 is right angled pointing downwards |
| All MCU boards have to implement at least PWR, EXT1, EXT2 (on medium and |
| large boards), and EXT3. EXT4 to EXT7 can be placed differently depending |
| on the board design. EXT4 to EXT7 can either be standard extension headers |
| or application specific headers. |
| |
| Documentation: |
| https://www.microchip.com/development-tools/xplained-boards |
| http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-42091-Atmel-Xplained-Pro-Hardware-Development-Kit_User%20Guide.pdf |
| |
| This binding provides a nexus mapping for 20 pins where pins are disposed |
| to have a even and odd column: |
| |
| Connector |
| Bind Pin Name Pin Pin Pin Name Bind |
| ID 1 2 GND |
| 0 ADC(+) 3 4 ADC(-) 1 |
| 2 UART(RTS)/GPIO1 5 6 UART(CTS)/GPIO2 3 |
| 4 PWM(+) 7 8 PWM(-) 5 |
| 6 IRQ/GPIO3 9 10 SPI(CS1)/GPIO4 7 |
| 8 I2C(SDA) 11 12 I2C(SCL) 9 |
| 10 UART(RX) 13 14 UART(TX) 11 |
| 12 SPI(CS0) 15 16 SPI(MOSI) 13 |
| 14 SPI(MISO) 17 18 SPI(SCK) 15 |
| GND 19 20 VDD(+3.3V) |
| |
| compatible: "atmel-xplained-pro-header" |
| |
| include: [gpio-nexus.yaml, base.yaml] |
