| /* |
| * Copyright (c) 2022 Vestas Wind Systems A/S |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/device.h> |
| #include <zephyr/drivers/can.h> |
| #include <zephyr/drivers/can/can_fake.h> |
| #include <zephyr/fff.h> |
| |
| #ifdef CONFIG_ZTEST_NEW_API |
| #include <zephyr/ztest.h> |
| #endif /* CONFIG_ZTEST_NEW_API */ |
| |
| #define DT_DRV_COMPAT zephyr_fake_can |
| |
| DEFINE_FAKE_VALUE_FUNC(int, fake_can_start, const struct device *); |
| |
| DEFINE_FAKE_VALUE_FUNC(int, fake_can_stop, const struct device *); |
| |
| DEFINE_FAKE_VALUE_FUNC(int, fake_can_set_timing, const struct device *, const struct can_timing *); |
| |
| DEFINE_FAKE_VALUE_FUNC(int, fake_can_set_timing_data, const struct device *, |
| const struct can_timing *); |
| |
| DEFINE_FAKE_VALUE_FUNC(int, fake_can_get_capabilities, const struct device *, can_mode_t *); |
| |
| DEFINE_FAKE_VALUE_FUNC(int, fake_can_set_mode, const struct device *, can_mode_t); |
| |
| DEFINE_FAKE_VALUE_FUNC(int, fake_can_send, const struct device *, const struct can_frame *, |
| k_timeout_t, can_tx_callback_t, void *); |
| |
| DEFINE_FAKE_VALUE_FUNC(int, fake_can_add_rx_filter, const struct device *, can_rx_callback_t, |
| void *, const struct can_filter *); |
| |
| DEFINE_FAKE_VOID_FUNC(fake_can_remove_rx_filter, const struct device *, int); |
| |
| DEFINE_FAKE_VALUE_FUNC(int, fake_can_recover, const struct device *, k_timeout_t); |
| |
| DEFINE_FAKE_VALUE_FUNC(int, fake_can_get_state, const struct device *, enum can_state *, |
| struct can_bus_err_cnt *); |
| |
| DEFINE_FAKE_VOID_FUNC(fake_can_set_state_change_callback, const struct device *, |
| can_state_change_callback_t, void *); |
| |
| DEFINE_FAKE_VALUE_FUNC(int, fake_can_get_max_filters, const struct device *, bool); |
| |
| #ifdef CONFIG_ZTEST_NEW_API |
| static void fake_can_reset_rule_before(const struct ztest_unit_test *test, void *fixture) |
| { |
| ARG_UNUSED(test); |
| ARG_UNUSED(fixture); |
| |
| RESET_FAKE(fake_can_start); |
| RESET_FAKE(fake_can_stop); |
| RESET_FAKE(fake_can_get_capabilities); |
| RESET_FAKE(fake_can_set_mode); |
| RESET_FAKE(fake_can_set_timing); |
| RESET_FAKE(fake_can_set_timing_data); |
| RESET_FAKE(fake_can_send); |
| RESET_FAKE(fake_can_add_rx_filter); |
| RESET_FAKE(fake_can_remove_rx_filter); |
| RESET_FAKE(fake_can_get_state); |
| RESET_FAKE(fake_can_recover); |
| RESET_FAKE(fake_can_set_state_change_callback); |
| RESET_FAKE(fake_can_get_max_filters); |
| } |
| |
| ZTEST_RULE(fake_can_reset_rule, fake_can_reset_rule_before, NULL); |
| #endif /* CONFIG_ZTEST_NEW_API */ |
| |
| static int fake_can_get_core_clock(const struct device *dev, uint32_t *rate) |
| { |
| ARG_UNUSED(dev); |
| |
| *rate = 16000000; |
| |
| return 0; |
| } |
| |
| static int fake_can_get_max_bitrate(const struct device *dev, uint32_t *max_bitrate) |
| { |
| ARG_UNUSED(dev); |
| |
| *max_bitrate = 5000000; |
| |
| return 0; |
| } |
| |
| static const struct can_driver_api fake_can_driver_api = { |
| .start = fake_can_start, |
| .stop = fake_can_stop, |
| .get_capabilities = fake_can_get_capabilities, |
| .set_mode = fake_can_set_mode, |
| .set_timing = fake_can_set_timing, |
| .send = fake_can_send, |
| .add_rx_filter = fake_can_add_rx_filter, |
| .remove_rx_filter = fake_can_remove_rx_filter, |
| .get_state = fake_can_get_state, |
| #ifndef CONFIG_CAN_AUTO_BUS_OFF_RECOVERY |
| .recover = fake_can_recover, |
| #endif /* CONFIG_CAN_AUTO_BUS_OFF_RECOVERY */ |
| .set_state_change_callback = fake_can_set_state_change_callback, |
| .get_core_clock = fake_can_get_core_clock, |
| .get_max_filters = fake_can_get_max_filters, |
| .get_max_bitrate = fake_can_get_max_bitrate, |
| .timing_min = { |
| .sjw = 0x01, |
| .prop_seg = 0x01, |
| .phase_seg1 = 0x01, |
| .phase_seg2 = 0x01, |
| .prescaler = 0x01 |
| }, |
| .timing_max = { |
| .sjw = 0x0f, |
| .prop_seg = 0x0f, |
| .phase_seg1 = 0x0f, |
| .phase_seg2 = 0x0f, |
| .prescaler = 0xffff |
| }, |
| #ifdef CONFIG_CAN_FD_MODE |
| .set_timing_data = fake_can_set_timing_data, |
| .timing_data_min = { |
| .sjw = 0x01, |
| .prop_seg = 0x01, |
| .phase_seg1 = 0x01, |
| .phase_seg2 = 0x01, |
| .prescaler = 0x01 |
| }, |
| .timing_data_max = { |
| .sjw = 0x0f, |
| .prop_seg = 0x0f, |
| .phase_seg1 = 0x0f, |
| .phase_seg2 = 0x0f, |
| .prescaler = 0xffff |
| }, |
| #endif /* CONFIG_CAN_FD_MODE */ |
| }; |
| |
| #define FAKE_CAN_INIT(inst) \ |
| CAN_DEVICE_DT_INST_DEFINE(inst, NULL, NULL, NULL, NULL, POST_KERNEL, \ |
| CONFIG_CAN_INIT_PRIORITY, \ |
| &fake_can_driver_api); |
| |
| DT_INST_FOREACH_STATUS_OKAY(FAKE_CAN_INIT) |